- Users - lists.chirpmyradio.com

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 18 Aug '23

18 Aug '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: 6594486c mml_jc8810.py: add Abbree AR-730 - fixes #10136 c297727c retevis_rt22.py: Add Baofeng W31E - fixes #9731 10426e15 Remove TONE_EXTRA from chirp_common.py - fixes #10795 331cbf6b Make chirp_common really allow custom tones --

1 0

[chirp_users] FMT7250DR Programming
by Bob MacWilliams 16 Aug '23

16 Aug '23

Hello: For some time now I have been using Chirp to program my 7250 with mixed results. #1 Can not change from FM to Digital (not in the drop down) #2 Yesterday I wanted to add some TSQL to some repeaters and accomplished that OK but after entering, the power switched to LOW. Had to go to NFM to regain the HI power. setting. Haven't seen this problem in any correspondence from others in the past emails, or am I missing something?. Bob bdmacwill(a)gmail.com

1 0

[chirp_users] _valid_tones
by Jim Unroe 16 Aug '23

16 Aug '23

Dan, I was just brought to my attention that the rb15.py driver has selections for tones in one Hz increments from 56.0 to 64.0 Hz. Doing some looking around I see that there is a "TONES_EXTRA" in chirp_common.py that matches these tones. It appears that the default tones have been changed from TONES to TONES + TONES_EXTRA. I don't know why this change was made, but now every radio I have tested, whether they support it or not, has these 10 additional tones appended to their list of tones. [image: TONES_EXTRA.png] Can this be changed back or do I need to make a plan to address this in the individual drivers for each of the affected radios? Jim

1 0

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 16 Aug '23

16 Aug '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: fa43f8f6 RB15/RB615: fix tone squelch issue - fixes #10790 6e7f8d42 retevis_rb15.py: Allow RB615 full band - fixes #10787 6066914f retevis_rb15.py: Allow RB15 full band - related to #10787 --

1 0

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 14 Aug '23

14 Aug '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: 8e6459f6 Fix style ef19fa4e Fix spelling ab80f8a9 mml_jc8810.py: Add Radtel RT-470X - fixes #10779 --

1 0

[chirp_users] Re: Developer mode browser has become R/O?
by Ron 10 Aug '23

10 Aug '23

I rolled back and forth between the latest build and chirp-next-20230601-installer.exe a couple times to verify that the problem is only in the newer build. > In the past I was able to change things in the developer mode browser to work around bugs but now it won't let me enter/change anything? >This happened after I recovered from a disk corruption and had to re-install CHIRP (possibly a newer build). Everything else works normally as before. >Thanks, >Ron

2 2

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 10 Aug '23

10 Aug '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: 25cf76fa Add Powerful UV-S5 alias 9f66f8d3 ga510.py: Add Abbree AR-F5 - fixes #9575 --

2 1

[chirp_users] FTM-3100R
by Andy Zaayenga 09 Aug '23

09 Aug '23

Hi folks, I've got a new-to-me Yaesu FTM-3100R. Picked up a cable from BlueMax49ers to run with CHIRP. I downloaded the radio using the FTM-3200D R template as per the CHIRP home page. Downloading and uploading works fine. I copied and pasted from my Yaesu FT-60R img 63 of the frequencies I monitor that are covered by the FTM-3100R. Uploading those to the radio works fine and downloading shows them all in memory. However, I notice that when I scan all 63 frequencies the radio only scans the first 14. The display just stops on the 14th location while the numbers under MR keep counting up to 63. Then it cycles back to location 1. I have the radios side by side and the FT-60R scans all the locations while the FTM-3100R only the first 14. The specs say the radio has 199 memory locations which is consistent with the CHIRP img * 199 "basic" memory channels, numbered "1" through "199". But the CHIRP image doesn't show the home channel or any of the L or U locations. * A "Home" channel, providing storage and quick recall of one prime frequency. * 10 sets of band-edge memories, also known as "Programmable Memory Scan" channels, labeled "L0/U0" through "L9/U9". Does anyone out there have an FTM-3100R and can let me know if I'm doing something wrong? I'm wondering if there's some issue with the FTM-3200D R template WRT the FTM-3100R. Thanks from a first-time poster! 73 Andy Zaayenga KD2SME Yaesu FT-60R, Yaesu FTM-3100R

2 5

[chirp_users] Developer mode browser has become R/O?
by Ron 09 Aug '23

09 Aug '23

In the past I was able to change things in the developer mode browser to work around bugs but now it won't let me enter/change anything? This happened after I recovered from a disk corruption and had to re-install CHIRP (possibly a newer build). Everything else works normally as before. Thanks, Ron

1 0

Re: [chirp_users] FTM-3100R
by Andy Zaayenga 07 Aug '23

07 Aug '23

Sorry, Dick. That file is my CHIRP file, and I renamed it with a bak extension because most servers do not allow img files due to security protocol. As Danny points out, you can delete the .bak part to make it an img file that can be read into CHIRP. Tonight I installed the CHIRP Legacy edition and went through the same exercise. No difference from the current version. The operative question is – Does anyone on this list use CHIRP successfully for their Yaesu FTM-3100R? Then I would know if it’s something about my configuration or CHIRP itself. Thanks all. Andy From: Danny Siminiuk <danny(a)siminiuk.com> Sent: Monday, August 7, 2023 5:22 PM To: chirp users <chirp_users(a)intrepid.danplanet.com> Cc: peter.fontneau <peter.fontneau(a)icloud.com>; Andy Zaayenga <andy(a)zaayenga.net> Subject: Re: [chirp_users] FTM-3100R "I’ve attached the img file, renamed to a bak extension" Rename <https://z8.zimbrahostedemail.com/service/home/~/?auth=co&loc=en_US&id=13351…> Yaesu_FTM-3100R.img.bak to <https://z8.zimbrahostedemail.com/service/home/~/?auth=co&loc=en_US&id=13351…> Yaesu_FTM-3100R.img Get it? _____ From: "w4rss" <w4rss(a)radioclub.org <mailto:w4rss@radioclub.org> > To: "peter.fontneau" <peter.fontneau(a)icloud.com <mailto:peter.fontneau@icloud.com> >, "chirp users" <chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> >, "Andy Zaayenga" <andy(a)zaayenga.net <mailto:andy@zaayenga.net> > Sent: Monday, August 7, 2023 4:18:25 PM Subject: Re: [chirp_users] FTM-3100R Andy, that img.bak file will not open on my tablet. I get a message that .bak files are not recognized. Dick On Aug 7, 2023 at 2:12 PM, Andy Zaayenga via chirp_users <chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> > wrote: Thanks Peter. None of the locations are marked Skip. For reference, I’ve attached the img file, renamed to a bak extension so the servers don’t block it. The Skip field only accepts S (Skip) or blank, there is no dropdown for Priority. The manual references that there is only one Priority channel, kept in memory location 0. No memory location 0 shows in the CHIRP file. 73 Andy From: peter.fontneau(a)icloud.com <mailto:peter.fontneau@icloud.com> <peter.fontneau(a)icloud.com <mailto:peter.fontneau@icloud.com> > Sent: Monday, August 7, 2023 12:58 PM To: Andy Zaayenga <andy(a)zaayenga.net <mailto:andy@zaayenga.net> >; chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> Subject: Re: [chirp_users] FTM-3100R Check to see if you have something entered in the Skip column of Chirp. https://chirp.danplanet.com/projects/chirp/wiki/MemoryEditorColumns Skip The scan skip mode for the channel. The values and their meanings are: * S: Skip this channel during scan * P: This channel is a priority On Aug 6, 2023, at 9:40 PM, Andy Zaayenga via chirp_users <chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> > wrote: Hi folks, I've got a new-to-me Yaesu FTM-3100R. Picked up a cable from BlueMax49ers to run with CHIRP. I downloaded the radio using the FTM-3200D R template as per the CHIRP home page. Downloading and uploading works fine. I copied and pasted from my Yaesu FT-60R img 63 of the frequencies I monitor that are covered by the FTM-3100R. Uploading those to the radio works fine and downloading shows them all in memory. However, I notice that when I scan all 63 frequencies the radio only scans the first 14. The display just stops on the 14th location while the numbers under MR keep counting up to 63. Then it cycles back to location 1. I have the radios side by side and the FT-60R scans all the locations while the FTM-3100R only the first 14. The specs say the radio has 199 memory locations which is consistent with the CHIRP img * 199 "basic" memory channels, numbered "1" through "199". But the CHIRP image doesn't show the home channel or any of the L or U locations. * A "Home" channel, providing storage and quick recall of one prime frequency. * 10 sets of band-edge memories, also known as "Programmable Memory Scan" channels, labeled "L0/U0" through "L9/U9". Does anyone out there have an FTM-3100R and can let me know if I'm doing something wrong? I'm wondering if there's some issue with the FTM-3200D R template WRT the FTM-3100R. Thanks from a first-time poster! 73 Andy Zaayenga KD2SME Yaesu FT-60R, Yaesu FTM-3100R <Yaesu_FTM-3100R_2023-08-06.csv>_______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Pete at peter.jay12(a)icloud.com <mailto:peter.jay12@icloud.com> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> To report this email as off-topic, please email chirp_users-owner(a)intrepid.danplanet.com <mailto:chirp_users-owner@intrepid.danplanet.com> Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Dick Smith at w4rss(a)radioclub.org <mailto:w4rss@radioclub.org> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com To report this email as off-topic, please email chirp_users-owner(a)intrepid.danplanet.com Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Danny at k5cg(a)hamoperator.org <mailto:k5cg@hamoperator.org> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> To report this email as off-topic, please email chirp_users-owner(a)intrepid.danplanet.com <mailto:chirp_users-owner@intrepid.danplanet.com> Searchable archive: https://www.mail-archive.com/chirp_users@intrepid.danplanet.com

1 0