- Users - lists.chirpmyradio.com

[chirp_users] Baofeng GT-3WP errata
by d＠deutrino.net 02 Feb '24

02 Feb '24

Hello and thanks for running this list and providing CHIRP! I've picked up a Baofeng GT-3WP (and have 2 more coming in the mail) and overall they seem to work well after being flashed with CHIRP, I've noticed a couple issues though. 1. only 6 character channel names! 2. the 'B' or lower channel is set incorrectly compared to the intended setting in CHIRP. Has anyone else flashed this model recently? I'm curious if my experience is unique and if I should submit bugs on the issue tracker. Thanks-

2 3

[chirp_users] Baofeng UV-9R Pro - flashing causes severe squelch problem
by d＠deutrino.net 02 Feb '24

02 Feb '24

Hello again, I obtained a pair of brand new Baofeng UV-9R Pro units a few months ago and promptly flashed one with CHIRP. Unfortunately it seems that flashing the unit causes some kind of strange problem with squelch. I've seen this referenced a few times elsewhere when searching the problem, forum posts, Amazon reviews etc, though I don't know if this happens with all units or just some (and would love to hear info from anyone who's flashed them). Observations, hopefully somewhat accurate: 1. After flashing the radio with CHIRP, when it is tuned to a continuous channel such as NOAA weather radio, the squelch cuts in and out so badly that the radio is more or less unusable. 2. The radio, before flashing, and after factory reset, reliably receives the same channel without squelch problems when placed in the same location, which indicates that the problem is not one of low signal or interference. 3. Setting the squelch to 0 in the menu does not have a positive effect on the problem. 4. The squelch problem can be temporarily "cured" by pressing one of the buttons, e.g. the menu button. At this point, the squelch will perform normally for several seconds before going back to the broken behavior, in the case of the menu button, possibly when the button press "times out". Has anyone else noticed this or know of a fix or workaround? I am happy to assist debugging if desired. Just trying to see if there is anything I've missed before opening an issue. Thanks- -- Sent from my thing that sends email

4 5

[chirp_users] Programming assistance
by Bennie Potgieter 01 Feb '24

01 Feb '24

Gooday I used this unit to get a a channel from a radio on a repeater is this the transmit or receive channel and the CT tone is positive I think how do I get te other channel end how do I feed it Manuel and with Chirp into my UV5R? Thank you

5 11

[chirp_users] Chirp Legacy EOL
by Jerry Kuhn 01 Feb '24

01 Feb '24

Hello, Just out if curiosity, has Chirp-legacy reached s complete End of Lifecycle and there will never be anything past chirp-legacy-20221217? I’ve migrated, for the most part, to Chirp-Next, but still occasionally use legacy and just was curious. Thanks! -Jerry Sent from my iPhone Pro Max

3 3

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 30 Jan '24

30 Jan '24

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: 2fac0a70 Fix some driver log message errors fe90410c Capture and show driver messages during load 463c4aed Fix marking tab as modified on menu delete af483640 17Pro (5RM). Add work mode menu to settings. Tested/Enabled for 5RM. 1837222a 17Pro Family: Refactor settings menu construction for clarity and scalability Issues addressed in this build: [Bug] deleting memory from the menu item Edit / Delete doesn't set the modified flag [Feature] 17Pro Family: Refactoring settings menu setup for readability and scalability [Feature] Adding vfo settings menu for 5RM [Bug] CSV file import doesn't handle fields with spaces or missing fields that are not applicable --

1 0

[chirp_users] Anytone 3318UV A
by Bruno Long 29 Jan '24

29 Jan '24

Hello, I'm trying to reprogram an older Anytone radio but it is not supported by CHIRP. Any advice on how to bypass this? or is there a way to get the radio added? it is an Anytone 3318UV A (with the blue banner on the inside. Many thanks, Bruno -- BRUNO LONG COMMERCIAL & EDITORIAL PHOTOGRAPHER Specializing in outdoor sports, brands and lifestyle images [image: Portolio-button.jpg] [image: Put-me-to-work-Button.jpg]

1 0

[chirp_users] Baofeng GM-5RH
by Joel McClure 28 Jan '24

28 Jan '24

I got this GMRS radio on Amazon, and it seems like nobody else bought it. The number of Baofeng variations is silly. It looks exactly like the Baofeng 5RM / AR-5RM (the ham version). I was hoping selecting "5RM" in CHIRP would work, but an error results. Has anybody gotten CHIRP or any other programming software to work with a GM-5RH? Thank you!

2 1

[chirp_users] question on configuring a frequency
by rob banks 23 Jan '24

23 Jan '24

Yep, it is a local university that I am going to be working at and found that their security had a freq, i thought I would listen in, listen only, but it looked weird to me. I was able to program a channel in my ht but only get some weird noise, I was wondering if there was some translation required that needed those c12 and type R values to make it audible....if it is at all, maybe it is just digital signal in general and I would not be able to get anything out of it. Really just curious to see what it was as i had not come across those values before. good winds Rob Re: [chirp_users] question on configuring a frequency To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <24CB14B8-61A5-4A67-847B-297CE6C3CE2D(a)n2vip.org> Content-Type: text/plain; charset="utf-8" So a quick google leads me to believe this is a law enforcement frequency, so I'll ask what is the service you hope to monitor? Where did you get that listing? If we know what you hope to monitor, we may find an alternate source for the information. That C12 tone setting looks vendor-specific, it likely 'maps' to either a standard DCS or CTCSS tone. Unless it is a digital mode Color code, but that feels unlikely... Ken On Tue, Jan 23, 2024 at 3:02 PM <chirp_users-request(a)intrepid.danplanet.com> wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. question on configuring a frequency (rob banks) > 2. Re: question on configuring a frequency (Jeffrey Vian) > 3. Re: question on configuring a frequency (Ken Hansen) > 4. Re: question on configuring a frequency (Jim Unroe) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 22 Jan 2024 15:14:55 -0500 > From: rob banks <corgimas(a)gmail.com> > Subject: [chirp_users] question on configuring a frequency > To: chirp_users(a)intrepid.danplanet.com > Message-ID: > < > CAMLd8jVTSjeXyWE8phNJkFLQ-pqAqBUP3BjZGD0q6xdZo8NHLw(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > I have a baofeng F8HP that I would like to add a frequency to. The details > I have are as follows > Frequency: 472.6125 > Type R > Tone C12 > How can I input that Type and Tone value in Chirp? Can I? > Thank you > Rob >

1 0

[chirp_users] question on configuring a frequency
by rob banks 22 Jan '24

22 Jan '24

I have a baofeng F8HP that I would like to add a frequency to. The details I have are as follows Frequency: 472.6125 Type R Tone C12 How can I input that Type and Tone value in Chirp? Can I? Thank you Rob

4 3

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 22 Jan '24

22 Jan '24

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: 2205c0f0 Remove clean files from tools/cpep8.blacklist cf8bca38 Fix the check for lines added to cpep8.manifest and cpep8.blacklist e6c6f359 Updated Spanish Translation ecdafa05 Update Turkish language 89be3da6 Autosize height of column headers of memedit 8971edbe Update man page a32f23d1 Update .po files f0cc99da Update Italian translation 50114b17 Add a GUI option to set restore tabs on start --

1 0