- Users - lists.chirpmyradio.com

[chirp_users] UV5X Programming issue
by Eric Chopin 21 Aug '21

21 Aug '21

UV5XP.... However to get CHIRP to see the radio either in the 'Download from radio' or 'Upload to radio' ... with the cable plugged in to my PC or my MAC, the radio must me switched OFF...then as I select 'Download or upload' as I select 'OK' i must immediately switch ON my radio then CHIRP sees it and proceeds. If I try to 'Download or upload' with the radio already switched on I get the message 'The radio did not respond' as CHIRP cannot see it connected. Any suggestions? Thanks VE7ECJ

4 3

[chirp_users] New Daily Build
by Build System 21 Aug '21

21 Aug '21

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20210821 A list of the changes included in this build (since the last daily) follows: Changes for Build #658 [Jim Unroe <rock.unroe(a)gmail.com>] [AT-778UV] Recommend correct model version when wrong model version is selected This patch will suggest the recommended "VOX" model version when a VOX supported radio is recognized by CHIRP and the user has selected the non-VOX model version. Vendor: non-VOX/VOX AnyTone: AT-778UV/AT-778UV VOX CRT: Micron UV/Micron UV V2 Retevis: RT95/RT 95 VOX related to #9141

1 0

[chirp_users] Downloading & Updating CHIRP
by n6mg＠verizon.net 20 Aug '21

20 Aug '21

Gent's...I'm old, and enjoying my "Golden Years", so I only ask that you be gentle with your replies.When I go to use CHIRP on my UV-5R A3, Tri-bander, I get a pop-up advising that Windows is blocking the "unsafe" download. I don't get a choice to download it anyway.We all know that there's nothing wrong with the download.What's the work-around for this?Thanks in advance.Milt.N6MG

4 3

[chirp_users] Port recognition issue
by Dennis Mosley 18 Aug '21

18 Aug '21

I downloaded CHIRP. Plugged my computer cable to a USB port on my computer and got an Error 3 message saying this port is not recognized. No driver. I use this port all the time. I purchased the cable from Amazon as being the one to buy for my Btech 50+1 radio. Help would be appreciated.--*Your pal. That sweet fella you love, Mr. Dos XX's himself, Dennis, Den, Denny, Dad, Pops, Grandpa, Uncle, Cousin, Mr. Mosley, Moe, Comrade, etc.*

4 7

[chirp_users] Port recognition issue
by Al Jones 18 Aug '21

18 Aug '21

Assuming that you're on Windows when you seem to have a port problem it's really necessary to bring up Device Manager to see which port is in use since the port may / can change depending on which USB port you're plugged into. Hopefully this got out on the list this time. Sorry, Jim.

1 0

Re: [chirp_users] chirp_users Digest, Vol 152, Issue 6
by Robert Bruner 14 Aug '21

14 Aug '21

Thanks for the quick reply. Unfortunately, the images did not come through (see below), but I did poke around in the Device Manager, but did not find anything resembling the programming cable listed anywhere. The only device listed for COM ports is SQL. Should I see the cable listed? Note: COM3 is the only choice presented for the CHIRP clone import process. Newbie Notes: - I managed to find the MIME / Plain Text flag in the User Settings, and updated it, so images should work now. (please resend) - I changed to receive grouped list (not sure what's protocol for replies) [image: image.png] /===========================================================/ Make sure you have selected the correct port. My programming cable is assigned COM3 but my computer has an internal serial port with nothing connected to it that is assigned COM1. If I accidentally choose COM1, I get the same error. [image: Radio_did_not_respond.png] Use Device Manager to determine which COM port number is assigned to the programming cable. Mine has been assigned COM3. [image: 2021-01-28 08_20_23-Device Manager.png] /===========================================================/ Thanks! Bob Robert Bruner On Fri, Aug 13, 2021 at 2:02 PM <chirp_users-request(a)intrepid.danplanet.com> wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. Unable to download from Baofeng BF-F8HP radio (Robert Bruner) > 2. Re: Unable to download from Baofeng BF-F8HP radio (Jim Unroe) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 13 Aug 2021 11:31:33 -0500 > From: Robert Bruner <rwbruner(a)gmail.com> > Subject: [chirp_users] Unable to download from Baofeng BF-F8HP radio > To: chirp_users(a)intrepid.danplanet.com > Message-ID: > < > CAGg8pOFNVQHFkk_AgVWVzviODEE1qcNap5rfjBDQOm_wnjbkrQ(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > First time radio owner, just getting started. > > Unable to download/clone from the radio to laptop. Programming cable > flashes red & green 3 times when plugging in. Upon Request download there > is a brief wait, then the error message is thrown. > > *Error message* > "An error has occurred. Radio did not respond". > (debug.log file attached) > > *Equipment* > Baofeng BF-F8HP radio > BTECH FTDI cable > CHIRP daily 20210724 > Windows 10, current with updates > > *Activities to-date:* > Attempted to "Download from Radio" on two different laptops, same result > Followed steps (message prompt) from CHIRP app > Followed printed steps with the FTDI cable, including installing latest > FTDI driver > Searched Wiki links > Searched Open/Closed support calls. (closest issue I could find is Bug > 9187) > Joined the chirp support and subscribed to the mailing list > > Suggestions for next steps would be greatly appreciated! > > Thanks! > > Bob > Robert Bruner >

2 3

[chirp_users] New Daily Build
by Build System 14 Aug '21

14 Aug '21

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20210814 A list of the changes included in this build (since the last daily) follows: Changes for Build #657 [Jim Unroe <rock.unroe(a)gmail.com>] [UV-5G] Allow Programming GMRS TX/RX Frequencies On All Channels This patch allows programming any combination of GMRS frequencies in memory rows 0 and 31-127. Any non-GMRS frequencies will continue to be restricted to RX only (TX disabled). Related to #9235 [Jim Unroe <rock.unroe(a)gmail.com>] [RT87] Add Retevis RT87 This patch adds support for the Retevis RT87 two-way radio. #6769 [Jim Unroe <rock.unroe(a)gmail.com>] [UV-5G] Fix Incorrect Offset for Repeater Channels This patch updats the driver with the correct offset for the repeater channels 23-30. #9255 [Pavel Milanes (CO7WT) <pavelmc(a)gmail.com>] [PATCH][FTL-x011] Add new driver for FTL-1011/2011/7011/8011 radios #7599 Add suppors for the 4/12/24 variants of the Vertex FTL-1011/2011/7011/8011, there is a later models with 99 channels that uses a different mem layout and is not supported by this driver. [Dan Smith <dsmith(a)danplanet.com>] Allow integer settings in mem.extra Needed for #6769

1 0

[chirp_users] Unable to download from Baofeng BF-F8HP radio
by Robert Bruner 14 Aug '21

14 Aug '21

First time radio owner, just getting started. Unable to download/clone from the radio to laptop. Programming cable flashes red & green 3 times when plugging in. Upon Request download there is a brief wait, then the error message is thrown. *Error message* "An error has occurred. Radio did not respond". (debug.log file attached) *Equipment* Baofeng BF-F8HP radio BTECH FTDI cable CHIRP daily 20210724 Windows 10, current with updates *Activities to-date:* Attempted to "Download from Radio" on two different laptops, same result Followed steps (message prompt) from CHIRP app Followed printed steps with the FTDI cable, including installing latest FTDI driver Searched Wiki links Searched Open/Closed support calls. (closest issue I could find is Bug 9187) Joined the chirp support and subscribed to the mailing list Suggestions for next steps would be greatly appreciated! Thanks! Bob Robert Bruner

8 8

Re: [chirp_users] Unable to download from Baofeng BF-F8HP radio
by Rich NE1EE 14 Aug '21

14 Aug '21

On 2021-08-13 17:25:-0400, Bob and Mary Jeter wrote: >Please cease using Reply All I understand the replies to this request, and agree in principle. But I am puzzled...by "Reply All", do you mean replying to the list, rather than replying to someone who asked the question? I might rather ask that replies be edited to leave what it relevant, rather than leave a lot of extraneous lines in the email, such as list footers and previous comments. TNX ~R~ 72/73 de Rich NE1EE The Dusty Key On the banks of the Piscataqua

4 3

[chirp_users] chromebook.
by Chad Reed 12 Aug '21

12 Aug '21

Hello. I have a friend who would like to install chirp on his chromebook laptop. He is running into some roadblocks. Can you offer some assistance that I could pass on please? He would like to use Baofeng UV-10R radios. Thanks -- Chad A. Reed

4 5