- Users - lists.chirpmyradio.com

[chirp_users] Additional Choices in Tone Mode Column
by thespurlocks＠juno.com 27 Dec '21

27 Dec '21

What do the choices DTCS-R and TONE-R do when selected in the Tone Mode column? I get the additional choices in the Tone Mode column when I open a NEW from the File tab. I do not get the additional choices when I Download from Radio from a UV5R BoaFeng. Thanks ____________________________________________________________ Sponsored by https://www.newser.com/?utm_source=part&utm_medium=uol&utm_campaign=rss_tag… Man's Parakeet Breeding Plan Got Way Out of Control http://thirdpartyoffers.juno.com/TGL3141/61c9ff522c7387f510defst04vuc1 Mask Argument Aboard Flight Leads to Woman's Arrest http://thirdpartyoffers.juno.com/TGL3141/61c9ff524e7fd7f510defst04vuc2 Teen Dies After Falling Overboard on Cruise Ship http://thirdpartyoffers.juno.com/TGL3141/61c9ff526da0b7f510defst04vuc3

2 1

[chirp_users] Kenwood TK 2406-M
by Bennie Potgieter 25 Dec '21

25 Dec '21

Gooday Im tring to program my Kenwood TK 2406 M but dont get it on the list,Can any one assist?Please Thank you

2 3

[chirp_users] sir good evening. could you install a software for cignus xtr-5 and also cignus w80. thank you sir.
by Jefferson Tindoy 25 Dec '21

25 Dec '21

3 4

[chirp_users] New Daily Build
by Build System 21 Dec '21

21 Dec '21

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20211221 A list of the changes included in this build (since the last daily) follows: Changes for Build #672 [Jim Unroe <rock.unroe(a)gmail.com>] [UV-5X3] Fix for Unable to See Settings on BTECH UV-5X3 The BTECH UV-5X3 as shipped from the factory does not always have all 6 of the sub-VFOs populated with frequencies. This was generating and error conditions that was preventing the Settings tabs from being displayed. This patch detects an unpopulated sub-VFO setting and populates the setting with the appropriate low band limit frequency. fixes #9617

1 0

[chirp_users] Yaesu FT-5D
by Jeff K3JRZ 20 Dec '21

20 Dec '21

I know it's been a while (over 3 months since the Yaesu FT-5D radio has be released and just as long as the info/issue (#9365) about using CHIRP with the FT-5D (https://chirp.danplanet.com/issues/9365) dated 09/11/2021. I also do not see the radio listed on the CHIRP site. Since then RT Systems and Yaesu both have applications to program the FT-5D. I've used the Yaesu ADMS14 through my Win10 VM and in my honest opinion it's complete garbage. It's the first Yaesu app that I've used to program a radio. CHIRP is by far THE best that I've used, AND it works on my Mac. Has any progress been made to have CHIRP be able to program the FT-5D? Even if it's just writing to a micro SD card that could be read by the radio it would be great. Thanks & 73. Jeff K3JRZ

6 11

[chirp_users] Kenwood 2000
by K0LNY 17 Dec '21

17 Dec '21

Hi All, So I've reinstalled Ubuntu on my machine to 18X, so I can use the older Chirp. I connected the cables to my Kenwood 2000 and successfully downloaded from the radio. I noticed that it operates in live mode, like it does with my Kenwood TH F6 HT. I exported the memories into a CSV file, like with all my radios. I tried to find a settings tab while in Chirp, and was only able to navigate to the memories tab. I am wondering if we can affect the settings of the Kenwood 2000 while in Chirp. Thanks. Glenn

1 0

Re: [chirp_users] Yaesu FT-817ND (US) download / upload issues
by rfmcc＠juno.com 17 Dec '21

17 Dec '21

J.J.Ring. Sorry for the delay in response but had chores and duties to perform to bed down things at the homestead before winter. Download from your radio then using the menu, export as a csv file and send the csv file. I believe I did / do have a copy of the cvs, I will check While I have a copy of the .img file I cannot convert it into .cvs. At any rate, the .img file, previously sent to you reflects the cvs. Were you ever able to upload to the Yaesu FT-817ND?Â No, unable to upload to 817ND. Yes, I believe I did upload, but don't know how to check the radio to see if it has done so. I tried uploading but instead of pressing the "A" button I pressed the "C" button, the program stated uploaded for a brief second then disappeared. Therefore I presume it is uploaded. Now if only I can check to see if it is. Any ideas? Do you have a copy of the unmodified img file that you downloaded from your radio before you used any type of software to modify the memories? I believe I do have a copy of the img file, I will check that tomorrow as well. Yes, that is what I previously sent to you. Perhaps your img file got corrupted. That's why CHIRP strongly suggests keeping an unmodified img file of your radio. It is a distinct possibility that it is corrupted. It would seem .img file is intact and not corrupted as per my statement two above. Open your current img file in CHIRP and export it in csv format. I did an export when downloading my HT's in the past. I will now have to remember how I did it. That my not be relevant considering all above. Do NOT use Microsoft Excel to edit that file, it will produce errors. Use libre office or open office instead. No errors with those. I haven't used Microsoft in ages it seems. I now only use LibreOffice exclusively. Yep, gave up Microsoft way back when. Take your unmodified img file from where you saved it and upload it to your radio. OK, will do. Did so and I think it went through, but don't know how to confirm. Does that work without error? Will check and see tomorrow. Not sure as above. ____________________________________________________________ Sponsored by https://www.newser.com/?utm_source=part&utm_medium=uol&utm_campaign=rss_tag… Judge Gives Rioter More Than 5 Years http://thirdpartyoffers.juno.com/TGL3131/61bcfaa9cb3407aa939aest04vuc1 Trump's Push to Oust McConnell Is Misfiring http://thirdpartyoffers.juno.com/TGL3131/61bcfaa9ea1a47aa939aest04vuc2 CDC Gives Thumbs-Up to 'Test-to-Stay' COVID Policy http://thirdpartyoffers.juno.com/TGL3131/61bcfaaa14b907aa939aest04vuc3

1 0

[chirp_users] New Daily Build
by Build System 16 Dec '21

16 Dec '21

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20211216 A list of the changes included in this build (since the last daily) follows: Changes for Build #671 [Jim Unroe <rock.unroe(a)gmail.com>] [UV-25X2] Repeater STE delay (rptdl) setting incorrect This patch corrects the "rpdl" setting range for the radios supported by the "btech.py" driver module. BTECH UV-25X2, UV25X4, UV-50X2, QYT KT8900D, KT7900D and similar variants. fixes #9603

1 0

Re: [chirp_users] Yaesu FT-817ND (US) download / upload issues
by rfmcc＠juno.com 15 Dec '21

15 Dec '21

Download from your radio then using the menu, export as a csv file and send the csv file. I believe I did / do have a copy of the cvs, I will check Were you ever able to upload to the Yaesu FT-817ND?Â No, unable to upload to 817ND. Do you have a copy of the unmodified img file that you downloaded from your radio before you used any type of software to modify the memories? I believe I do have a copy of the img file, I will check that tomorrow as well. Perhaps your img file got corrupted. That's why CHIRP strongly suggests keeping an unmodified img file of your radio. It is a distinct possibility that it is corrupted. Open your current img file in CHIRP and export it in csv format. I did an export when downloading my HT's in the past. I will now have to remember how I did it. Do NOT use Microsoft Excel to edit that file, it will produce errors. Use libre office or open office instead. No errors with those. I haven't used Microsoft in ages it seems. I now only use LibreOffice exclusively. Take your unmodified img file from where you saved it and upload it to your radio. OK, will do. Does that work without error? Will check and see tomorrow. 73Mr. McCeeKC1HLD ____________________________________________________________ Sponsored by https://www.newser.com/?utm_source=part&utm_medium=uol&utm_campaign=rss_tag… Decades-Old Human Remains Belong to 1960s Guitarist http://thirdpartyoffers.juno.com/TGL3131/61b93ff0675363ff04f7fst04vuc1 Meadows: My Texts Were 'Selectively Leaked' http://thirdpartyoffers.juno.com/TGL3131/61b93ff0864393ff04f7fst04vuc2 Video Emerges in Baffling Murder of Billionaire Couple http://thirdpartyoffers.juno.com/TGL3131/61b93ff0a51693ff04f7fst04vuc3

1 0

Re: [chirp_users] Yaesu FT-817ND (US) download / upload issues
by rfmcc＠juno.com 14 Dec '21

14 Dec '21

Many thanks for your several responses and suggestions. Since yesterday, Monday, Dec. 13, 2021 I’ve been trying with small result to get frequencies loaded onto my Yaesu FT-817ND. In the past I’ve had no problems with CHIRP and my various HT’sI’ve tried everything I can think of, as well as, by observing videos; following suggestions from more experienced folks; loading CHIRP first before turning on the radio and after turning on the radio to no avail. I’ve tried in “clone mode” and outside of clone mode. I’ve unplugged both ends of the FTDI FT232 chipset USB to 8 Pin Mini Din Male Serial Adapter CT-62 CAT Cable for Yaesu Radio FT-817, FT-857 and then plugged them in again but nothing helps. Needless to say I’ve read and reread the Owners Manual several times but no luck. Indeed, the manual seems to be outdated in the area of CT-62 CAT. So I;m at my wits end! If anybody can help it will be appreciated. I was able to download the .img files from the radio after trial and error by using the designation of Yaesu FT-817ND (US). That said I’ve been unable to upload the .img file back to the radio after successfully entering all the wanted frequencies for 70cm, 2 meters and 6 meters. One thing I found odd was when the radio downloaded to CHIRP it had some strange entries, (see the attached), perhaps that is the reason for it. At any rate I couldn’t eliminate these oddities from the .img list. If anyone has any suggestions I would greatly appreciate it as I would like to be up and running on my Yaesu in January, 2022. 73 Mr. McCeeKC1HLD ____________________________________________________________ Choose to be safer online. Opt-in to Cyber Safety with NortonLifeLock. Get Norton 360 with LifeLock starting at $9.95/month.* https://store.netzero.net/account/showService.do?serviceId=nz-nLifeLock&utm…

2 1