- Users - lists.chirpmyradio.com

[chirp_users] Help with Sinorise SR-626U
by Dennis Green 06 Dec '18

06 Dec '18

Good morning, Anybody got information how to program the Sinorise SR-626U radio? I have sent e-mails to the manufacturer but no response. Greetings, Dennis, ZS4BS / ZS2B / 7P8DG Well to be perfectly honest, in my humble opinion, of course without offending anyone who thinks differently from my point of view, but also by looking into this matter in a different perspective and without being condemning of one's view's and by trying to make it objectified, and by considering each and every one's valid opinion, I honestly believe that I completely forgot what I was going to say. --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

6 19

[chirp_users] New Daily Build
by Build System 05 Dec '18

05 Dec '18

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20181205 A list of the changes included in this build (since the last daily) follows: Changes for Build #542 [Vincent Stipo <v(a)xpctech.com>] [FT818] New Model Support Yaesu FT-818 #5607

1 0

[chirp_users] No communication
by billpaul＠ij.net 30 Nov '18

30 Nov '18

Same Yaesu FT60r Same cable New Dell PC Chirp and Ft60r will not communicate. Tried all the physical usb ports and numbered ports. Com port recognizes the cable. Thank you.

6 9

[chirp_users] New Daily Build
by Build System 28 Nov '18

28 Nov '18

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20181128 A list of the changes included in this build (since the last daily) follows: Changes for Build #541 [Dan Smith <dsmith(a)danplanet.com>] Remove csvdump from pep8 manifest Related to #6227 [Dan Smith <dsmith(a)danplanet.com>] Remove old and broken csvdump This is a relic from the early days of CHIRP, before we had a general-purpose UI and when we only supported four models. Thanks to Jake Merdich for noticing it was even still there. Fixes #6227 [Antony Jordan <me6kxv(a)gmail.com>] Add support for Kenwood TS-850 #6229

2 1

[chirp_users] QYT KT8900 startup channels
by Tycen Stafford 20 Nov '18

20 Nov '18

Radio: QYT KT8900 (no "D" - just the KT8900) CHIRP Version: daily-20181018 (latest I believe) OS: macOS 10.13.6 (but shouldn't matter in this case) In CHIRP, under Settings > Work Mode Settings you are able to specify "MR A channel" and "MR B channel" as the default channels your radio starts on (assuming the VFO/MR mode is set to Channel). This has worked for me previously - but a while ago something changed. I don't have an exact timeline - in the last 6 months or less I believe. Screenshot for reference: https://www.dropbox.com/s/mt458zbn8t8zx74/Screenshot%202018-11-13%2010.34.1… MR A channel setting is still "respected", but no matter what I put in MR B channel the radio starts up on channel 1. I tried changing it to other channels (and saving then uploading) multiple times but there is no change. When I change MR A it gets applied, but not MR B. Any ideas? I went back and grabbed the oldest .img file I had (from May) and it is still happening, so I don't think it's an issue with the image file. Anyone with a QYT KT8900 that can test this as well? Thanks!

2 2

Re: [chirp_users] chirp_users Digest, Vol 119, "port issue.
by P² P² 18 Nov '18

18 Nov '18

Device Manager in windows, Com ports, unplug and plug in your radio cable…whichever one goes away and comes back is the “port.” Generally a “Prolific 2303…COMX,” but could be CH340, FTDI, etc… Sent from Mail for Windows 10 From: chirp_users-request(a)intrepid.danplanet.com Sent: Sunday, November 18, 2018 1:04 PM To: chirp_users(a)intrepid.danplanet.com Subject: chirp_users Digest, Vol 119, Issue 13 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Help with downloading from radio to chirp (Joseph Fitzgerald) 2. Re: Help with downloading from radio to chirp (Glenn At Home) 3. Re: Help with downloading from radio to chirp (Joseph Fitzgerald) 4. Re: Help with downloading from radio to chirp (Jim Unroe) ---------------------------------------------------------------------- Message: 1 Date: Sat, 17 Nov 2018 20:20:00 -0700 From: Joseph Fitzgerald <josephfitzgerald65(a)gmail.com> Subject: [chirp_users] Help with downloading from radio to chirp To: chirp_users(a)intrepid.danplanet.com Message-ID: <CAKT9VLGOk2BaF31QrexK1cd4SxbXKZedQ5hxdNr7SuV+j3+Vrw(a)mail.gmail.com> Content-Type: text/plain; charset="utf-8" Hi All; Not computer savvy at all... Tried to download from radio to chirp, it asks me for "port;" I have no idea how to set that. Thanks

1 0

[chirp_users] Help with downloading from radio to chirp
by Joseph Fitzgerald 18 Nov '18

18 Nov '18

Hi All; Not computer savvy at all... Tried to download from radio to chirp, it asks me for "port;" I have no idea how to set that. Thanks

3 3

[chirp_users] Yaesu FT-70D Programming issues
by royord 16 Nov '18

16 Nov '18

Bottom Line: Frequency off just enough to be annoying. I programmed my NEW FT-70D using chirp and had issues with the frequency being slightly off. More detail to come, I hope that the community has a good/quick solution. Maybe the issue was with my tuning steps. Version 20181018 Daily Version Thanks, Roy

1 0

[chirp_users] Anytone AT-D878UV
by CN85rq 16 Nov '18

16 Nov '18

This new handheld is now shipping. Has anyone tried it yet with CHIRP? Steve

5 5

[chirp_users] using the program
by bob 15 Nov '18

15 Nov '18

every time I fire up Chirp, I can't remember how chirp, the program, works.--

3 2