- Users - lists.chirpmyradio.com

Re: [chirp_users] How do I get extended error report from CHIRP? debug.log location in windows 10
by Gary Craig 21 Jan '19

21 Jan '19

On my windows 10 laptop the location of the debug.log file is under Windows\Users\username of installer(in my case under admin since i installed it that way)\AppData\Roaming\CHIRP Be blessed! May 2019 be our year of change & growth! Gary Craig Maintenance Webco Industries Texas Distribution 750 Martin Luther King Jr Dr Orange, TX 77630-3094 409-886-0807 ext. 107 Fax 918-246-7045 gcraig(a)webcotube.com<mailto:gcraig@webcotube.com> From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> On Behalf Of Nigel A. Gunn G8IFF/W8IFF Sent: Thursday, January 17, 2019 4:02 PM To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com>; D.J.J. Ring, Jr. <n1ea(a)arrl.net> Subject: Re: [chirp_users] How do I get extended error report from CHIRP? This email originated from an external sender. Use caution when following links or opening attachments as they could be malicious It's in the DEBUG.LOG file stored somewhere on your hard drive (in the ~/chirp folder on Linux, no idea where in Windows) On 17 January 2019 at 16:34 "D.J.J. Ring, Jr." <n1ea(a)arrl.net<mailto:n1ea@arrl.net>> wrote: How do I get extended debugging info from CHIRP. I finally was able to test my USB cable. My cable is fine. My Wouxun KG-UV8E works fine on Wouxun's Windows software, but does not work on CHIRP, either on Windows 10 or Arch Linux. I went back to the January 2018 daily build of CHIRP and used the module that is for the UV8D Plus kguv8dplus.py and it doesn't work. How can I help with this? Regards, David N1EA _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Nigel Gunn, W8IFF at nigel(a)ngunn.net<mailto:nigel@ngunn.net> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com<mailto:chirp_users-unsubscribe@intrepid.danplanet.com> Nigel A. Gunn, 1865 El Camino Drive, Xenia, OH 45385-1115, USA. tel +1 937 825 5032 Amateur Radio G8IFF W8IFF and GMRS WRBV701, e-mail nigel(a)ngunn.net<mailto:nigel@ngunn.net> www http://www.ngunn.net

1 0

[chirp_users] Newbie BTECH UV-5X3
by joe Bonneville 20 Jan '19

20 Jan '19

I have downloaded CHIRP and used to program my radio but after uploading data to my radio the channels are there but I have no sound when it picks up a signal. Any suggestions would be appreciated. -- Joseph Bonneville C-(802)-289-1299 e-mail: isaiahrocks2010(a)gmail.com

4 4

[chirp_users] Issue #6389 created. Errors working with Puxing PX-2R
by Dave B 20 Jan '19

20 Jan '19

Hi. Just logged a bug, as per subject line. "Issue #6389 created. Errors working with Puxing PX-2R" Any other info wanted, just ask. 73 Dave G0WBX.

1 0

[chirp_users] New Daily Build
by Build System 20 Jan '19

20 Jan '19

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20190120 A list of the changes included in this build (since the last daily) follows: Changes for Build #547 [Jim Unroe <rock.unroe(a)gmail.com>] [UV-5R] Incorrect Model Selected with UV-5R Add detecton for new Baofeng UV-5R firmware version string. Addresses bug #6379

1 0

[chirp_users] Steps To reset the TYT TH-9800
by Glenn At Home 19 Jan '19

19 Jan '19

Hi, Before I re-upload my CSV file, that I edited with Open Office, I was wondering if anyone can send me the button steps to reset the radio to its defaults. I had read some reference to this in the manual, but of course it really did not indicate literally which button for the function key, and how many presses. With my poking around, and not knowing the buttons, I may have set some things in a way that I don't want. For example, it seems that all my channels are on the left, and I want them split, I don't know if the radio will do this automatically after I upload my CSV file, but at least I'll be starting with a clean slate. Thanks. Glenn Sent From My Tabletop

4 5

[chirp_users] more trouble with CSV file
by Glenn At Home 19 Jan '19

19 Jan '19

Hi All, Maybe someone can figure out what I did wrong in my CSV file. It was working, and I added a 10 meter repeater and two 6 meter repeaters and a 1.25 meter repeater. It says error on line 169, but it always seems to reference the last line. The lines in question would be between the left most numbers of 127 and 140. The repeaters on repeater.com only gave one tone, and I put in the others, the 6 & 10 m, just to keep the fields full. The one that was given was the 1.25 m repeater, I'll list that one below: 224.7600 -1.6 MHz 146.2 Omaha Thanks for any help. Sent From My Tabletop

8 21

[chirp_users] HELP with Yaesu FT-70DR issue writing banks to radio
by Robert Matos 18 Jan '19

18 Jan '19

I posted a question to the list a while back but didn’t get any responses (content below). Should I submit a bug request? The FAQ didn’t offer anything that could help and I don’t see anything in the documentation related to my radio about whether the bank support is in place so not sure if it’s a user error at this point. “ I am having trouble getting my bank selections to upload to the radio. My frequency memory entries and other settings carry over just fine, however the radio says “No Banks” even though I have entered memory positions into one or more banks in Chirp. This is using CHIRP daily-20190104 on Mac OSX." Best, Rob --------------- Rob Matos 617.302.7593 rfm8os(a)gmail.com

2 2

[chirp_users] CHIRP issue to "download from Radio"
by Christophe 18 Jan '19

18 Jan '19

Hi there! Sorry to disturb you with a newbie's problem but FAQ doesn't help me at all, so I have first raise a BUG (#6379) on CHIRP website, but perhaps this is not the best option... I'm French, and I recently purchase an Baofeng UV-5R on aliexpress, and would like to use CHIRP to modify options, name and frequency of channels.After some difficulties with the cable's driver (with WINDOWS 7), this is now CHIRP that don't want to download the image from my !Even if I put the correct PORT, Vendor (Baofeng) and Model (UV-5R) result is always: "Incorrect 'Model' selected" (But I have an UV-5R!) I have check some parameters on the Radio if it could help:(Power+3) BF4816N(Power+6) 181016N / B5R0001 CHIRP version is the last one: chirp-daily-20190112 Could you help me understand what is the issue? USB Cables is working with the original Boafeng software (but CHIRP seems to be a best option to edit). Thank you very much for help. Christophe

3 3

[chirp_users] How do I get extended error report from CHIRP?
by D.J.J. Ring, Jr. 18 Jan '19

18 Jan '19

How do I get extended debugging info from CHIRP. I finally was able to test my USB cable. My cable is fine. My Wouxun KG-UV8E works fine on Wouxun's Windows software, but does not work on CHIRP, either on Windows 10 or Arch Linux. I went back to the January 2018 daily build of CHIRP and used the module that is for the UV8D Plus kguv8dplus.py and it doesn't work. How can I help with this? Regards, David N1EA

2 3

Re: [chirp_users] chirp_users Digest, Vol 120, Issue 13ityt9800 band selection
by Gary Craig 17 Jan '19

17 Jan '19

Glenn, According to the chart, the left side can do all the bands on the radio. The right side has 144 MHz & 430 MHz. Be blessed! May 2019 be our year of change & growth! Gary Craig Maintenance Webco Industries Texas Distribution 750 Martin Luther King Jr Dr Orange, TX 77630-3094 409-886-0807 ext. 107 Fax 918-246-7045 gcraig(a)webcotube.com<mailto:gcraig@webcotube.com> From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> On Behalf Of Glenn At Home Sent: Wednesday, January 16, 2019 10:09 PM To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Subject: Re: [chirp_users] chirp_users Digest, Vol 120, Issue 13ityt9800 This email originated from an external sender. Use caution when following links or opening attachments as they could be malicious Hi, So far, my UHF are on my left side. Does this mean everything is on the left side? Glenn ----- Original Message ----- From: Nick<mailto:papanick@netzero.net> To: lr60(a)yahoo.com<mailto:lr60@yahoo.com> ; chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> Sent: Friday, December 28, 2018 8:46 AM Subject: Re: [chirp_users] chirp_users Digest, Vol 120, Issue 13ityt9800 You may want to rethink your bands on the Right and Left sides. They are reversed according to my radio. I often get lost in thought and that's OK! Nick K7NQB 73 ---------- Original Message ---------- From: P² P² via chirp_users <chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com>> To: "chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com>" <chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com>> Subject: Re: [chirp_users] chirp_users Digest, Vol 120, Issue 13ityt9800 Date: Thu, 27 Dec 2018 13:29:56 -0700 I have my latest file if you want to play with one....reply to lr60(a)yahoo.com<mailto:lr60@yahoo.com> All bands, including 6 and 10 will only work on the right side. The left only 2 and 70cm Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10 From: chirp_users-request(a)intrepid.danplanet.com<mailto:chirp_users-request@intrepid.danplanet.com> Sent: Thursday, December 27, 2018 1:04 PM To: chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> Subject: chirp_users Digest, Vol 120, Issue 13 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com> To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com<mailto:chirp_users-request@intrepid.danplanet.com> You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com<mailto:chirp_users-owner@intrepid.danplanet.com> When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Setting Up The TYT TH-9800 (Glenn At Home) 2. Unable to communicate with Kenwood TH-G71 using quality USB cable and CHIRP 20181214 (Mark Howie) 3. Re: Unable to communicate with Kenwood TH-G71 using quality USB cable and CHIRP 20181214 (Dave Phillips) 4. Re: Unable to communicate with Kenwood TH-G71 using quality USB cable and CHIRP 20181214 (Mark Howie) 5. Re: Unable to communicate with Kenwood TH-G71 using quality USB cable and CHIRP 20181214 (Dave Phillips) 6. Re: Can?t get your program to work on pc or Mac. The pc crashed and the Mac would not let the program run because of security issues??? (Dennis Wage) ---------------------------------------------------------------------- Message: 1 Date: Wed, 26 Dec 2018 19:20:45 -0600 From: "Glenn At Home" <GlennErvin(a)cableone.net<mailto:GlennErvin@cableone.net>> Subject: [chirp_users] Setting Up The TYT TH-9800 To: "Discussion of CHIRP" <chirp_users(a)intrepid.danplanet.com<mailto:chirp_users@intrepid.danplanet.com>> Message-ID: <7909033147D74A62976313032CC70BBD@NUCPPYH> Content-Type: text/plain; charset="iso-8859-1" Hello, I noticed the settings in Chirp for most, if not all the menu settings for this radio. I'm having trouble setting it up, even though I uploaded some channels into it with Chirp. The thing is, I need to set one side for 6 & 10 meter and the other for UHF. Reading the manual only tells me that these things need to be done, but without someone making a video or manual that is like describing the radio over the phone, or on paper with only text, there is no way for me to know which controls do what. Youtube videos say things like this button or that dial, and the manual have graphics depicting which symbol to look for. I have fiddled around with it, but to no avail. So I'm wondering if there is something in the settings which will assign each side to it's bands. Thanks for any assistance. Glenn Sent From My Tabletop

1 0