- Users - lists.chirpmyradio.com

[chirp_users] Unable to Download from GMRS-V1
by Aric Gregson 15 Jun '20

15 Jun '20

Hello, I am new to this. I installed Chrip on a Mac (the latest daily build yesterday). I was unable to download from the GMRS-V1. I was given an error the that length of data did not match expected. Is this a known issue? Is there a work-around? Did I do something incorrectly? Thanks in advance, Aric

3 3

[chirp_users] Radioddity gs-5b
by isumano＠me.com 15 Jun '20

15 Jun '20

I would love for Chirp to support this radio!

3 3

[chirp_users] Program a TYT 8600. HELP
by Ruthann Brightwell 10 Jun '20

10 Jun '20

2 1

[chirp_users] TYT TH-UV3R - Channels not available after Upload to Radio
by djdman 2k 10 Jun '20

10 Jun '20

Filed a bug with details @ https://chirp.danplanet.com/issues/7969. Any suggestions would be most appreciated! Cheers, Tom

1 0

[chirp_users] CRT Micron Frequency Issue
by Paul G7BHE 09 Jun '20

09 Jun '20

Hi everyone I have just bought an expanded CRT Micron UV. It has frequency coverage of 136-174 and 400-490. CHIRP is not allowing me to enter frequencies outside of 144-146 & 430-440. Has anyone else encountered this? Is it a CHIRP issue perhaps? I am able to enter the frequencies manually onto the radio and using the OEM software. But frankly that is a really bad program. Thanks Paul G7BHE Sent from my iPhone

4 4

[chirp_users] (no subject)
by Tommy Long 08 Jun '20

08 Jun '20

I like to know if you can copy and paste from something to the radio ?

3 2

[chirp_users] CHMOD ...
by Peter 08 Jun '20

08 Jun '20

Hi all: I am not sure who came up with the brilliant tip of chmod 777 /dev/ttyUSB0 as I have deleted the email suggesting that. So THANK YOU for that suggestion. I was getting frustrated trying to get Chirp on Linux Mint 19.2 to up/download from my new (to me) Icom 2100H. All I got was error messages that the radio had responded inappropriately. Until I did the chmod thing. IT WORKED. So, thanks again. Now I can get going on the next step of a very long march. Peter, VE3BBN -- "There is nothing - absolutely nothing - half so much worth doing as messing about in boats" - Kenneth Grahame in “The Wind in the WIllows”

4 5

[chirp_users] Chirp Linux - Sorting frequencies
by Fernando Pompeo 08 Jun '20

08 Jun '20

2 1

Re: [chirp_users] chirp_users Digest, Vol 138, Issue 5
by Ken Auggie 05 Jun '20

05 Jun '20

> On Fri, Jun 5, 2020 at 12:14 PM Ken Auggie <kbauggie(a)gmail.com> wrote: >> >> CHIRP (as of daily-202000603) is having errors “cloning” a new Baofeng UV-82 High Power using a Baofeng USB cable (both purchased through Amazon). The errors occur on both a 2012 Mac Pro running Mojave 10.14.6 and 2012 MacBook Pro running Catalina 10.15.. >> >> On the Mac Pro, I always get the error “Radio did not respond”. I tried with the built-in driver as well as the driver on the FTDI Chip website (v2.4.2) but same error. >> >> On the MacBook Pro, CHIRP was able to initiate the cloning process but then error’ed out with “Radio refused to send second block” or something to that effect. I then installed the FTDI Chip v2.4.2 driver and now always get the “Radio did not respond” error. >> >> I booted the MacBook Pro to Windows 10, and without installing any drivers (I believe I already had appropriate FTDI drivers for my OBDII cable), CHIRP successfully cloned the UV-82 High Power, so this validates that both the Baofeng UV-82 High Power and the Baofeng USB cable are operating correctly. >> >> The Mac OS X tips have not provided any solution. >> >> So this comes down to, IMO, the CHIRP software. As there appears to be reports of success with using OS X CHIRP, I can only assume it’s specific to the UV-82 (the newer “High Power” version, which seems to be distinct to the original UV-82HP) and/or my 2012 Mac computers (doubtful its a problem with the computers are they are different hardware-wise and OS version-wise). >> >> Can anyone provide any insight, guidance, suggestions that may work for the hardware mentioned? > > Hi Ken, > > I have no issues here with my Baofeng UV-82HP on my MacBook Air > running macOS Catalina. I'm even using a programming cable with a > counterfeit Prolific USB-to-Serial chip. > > What I had to learn when I got my first UV-82 was that the metal pins > of the programming cable stick in the metal rings of the speaker/mic > socket. That "stiction" made me think that it was fully inserted when > in reality it still had a tiny way to go. It took a little wiggle and > a press to get it to snap in the rest of the way. Now that I am aware > that this can happen, I've mastered the technique of getting it fully > inserted the first time so it rarely happens any more. > > Jim KC9HI Thanks for the advice Jim. But I don’t believe this is connection issue for me since under OS X on my laptop, I booted to Windows without touching the cable nor reseating the connections, and CHIRP/Windows 10 worked just fine. Again, I believe this issue may be software related involving the “newer” Baofeng UV-82 High Power (which technically is not the same as the UV-82HP), but only on the OS X version of CHIRP (perhaps OS X driver-related as well).

1 0

[chirp_users] Ubuntu 20.04 chirp not found
by Ronald Scott Moody 05 Jun '20

05 Jun '20

Just added the repo to my Ubuntu MATE 20.04 install, updated apt, but when I run apt-get install chirp-daily I get Unable to locate package chirp-daily.

8 19