- Users - lists.chirpmyradio.com

[chirp_users] Rugged radios.
by Chris 17 Dec '20

17 Dec '20

Good morning, Looking to see if anyone is working on being able to program a rugged radio model RDM-DM dual band radio. Thanks you, Chris Sent from my iPad

4 5

[chirp_users] Question
by Lolipop 142 14 Dec '20

14 Dec '20

Does CHIRP support the Baofeng UV-9R AMG? It isnt in the supported list on the website but it is stil a variant of the UV-9R. Is it supported?

6 10

[chirp_users] FT 857 upload problem
by John Houlihan 13 Dec '20

13 Dec '20

Greetings all, Using version Daily - 20201014. Linux Ubuntu Mate V 20.04. CAT - USB lead. Cat speed to 9600. Image file of radio saved if required. With FT817ND download and upload OK. With FT857D download OK. Carried out widebanding by solder jumper method. Memory image file upload fails, reports 'radio did not ack block 0'. Connections and lead seem good, FLRig controls the 857 OK. Original Yaesu CAT62 lead tried with serial to USB adapter, no change. Chirp bug 3081 of 2015 similar case but resolved by sender, no details. Any help appreciated. John G4BLJ

1 0

[chirp_users] Installer problem
by Tom Murden 12 Dec '20

12 Dec '20

I have a 2016 version of chirp installed on a windows vista pc. If I try to run the installer for the new version, I get several file errors and have to abort. Do I need to remove the old version first. My old chirp version tried to upgrade on its own but nothing happened? Sent from my iPhone

3 2

[chirp_users] New to ham radios
by James Walker 11 Dec '20

11 Dec '20

Good morning, I bought a set of Baofeng UV-82hp radios a few weeks ago since than I have not been able to program them. I tried two different cables so far the one that came with the radios and one that I bought from Amazon, the Amazon cable says it’s FTDI, it does flash and recognize my radios but I get an error message while trying to clone says that the radio can’t be Recognized by com port 6. I’ve tried to update, install, reinstall the ports abound twenty times. I have no idea what I’m doing wrong. I’m going to try another cable any Sunday would be great! Respectively,

3 10

[chirp_users] Yaesu FT7250D with CTF-29
by Silverfox 05 Dec '20

05 Dec '20

I recently bought a CTF-29 after reading it was the cable to buy based on Youtube videos. I cannot get it to work on windows 10 Pro. On doing a little research on the internet I see that most programming software for the radio come with a USB-29F cable. I am skeptical that there is a difference between the two. Any advice from the experts? Alan - W6ARH

4 4

[chirp_users] Version , power level not saved on GT-3TP
by Ceferino Lamb 02 Dec '20

02 Dec '20

Howdy, Just installed CHIRP daily-20201125 and did a minor mod on my Baofeng GT-3TP. That minor mod was only to lower default trx power on one freq in memory, and rev my version counter. The mod to power level won't take. I tried twice. Anybody BTDT? -- K7CRL Quis custodiet ipsos custodes?

3 3

[chirp_users] VX-150
by Dave Gomberg 01 Dec '20

01 Dec '20

Running CHIRP daily-20190227 Can't open a Vertex Standard VX-150 for download either as Vertex or Yeasu. How do I open it? -- Dave Gomberg, San Francisco NE5EE Programming since 1960 All addresses, phones, etc. at http://www.sfwcf.com/ham/info.html San Francisco Ferments??? You bet: http://sfwcf.com/sfferments

4 5

[chirp_users] New Daily Build
by Build System 28 Nov '20

28 Nov '20

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20201128 A list of the changes included in this build (since the last daily) follows: Changes for Build #639 [Jim Unroe <rock.unroe(a)gmail.com>] [UV-5R] Firmware Version Filled With Spaces This patch accomodates models supported by the uv5r.py driver that have a firmware versoion populated with space characters. fixes #8473 [Jim Unroe <rock.unroe(a)gmail.com>] [AT-778UV] Add DTMF Settings Tab to AnyTone AT-778UV [3 of 3] This patch adds a DTMF settings tab that nearly mirrors the OEM software related to #8447 [Jim Unroe <rock.unroe(a)gmail.com>] [AT-778UV] Add Key Assignment Settings Tab to AnyTone AT-778UV [2 of 3] This patch adds a Key Assignment settings tab that nearly mirrors the OEM software related to #8447 [Jim Unroe <rock.unroe(a)gmail.com>] [AT-778UV] Add Function Settings Tab to AnyTone AT-778UV [1 of 3] This patch adds a Function settings tab that nearly mirrors the OEM software related to #8447

4 3

[chirp_users] Issue with latest build and Baofeng GT-3TP
by Ceferino Lamb 27 Nov '20

27 Nov '20

I updated today and made a minor mod to my HT, lowering default tx power on one of my stored freqs. That failed to store the mod on HT, no error msg. Tried twice. Failed. Then back in the truck I found that I could no longer hear other HTs in our convoy. So I reset the HT, uninstalled the latest CHIRP build on my w10 box, went back to daily-20201014, re-uploaded file to HT, and all is working fine again. -- K7CRL Quis custodiet ipsos custodes?

2 4