- Users - lists.chirpmyradio.com

[chirp_users] (None) Entries in Chirp
by bwmoore＠slidesnmoore.com 06 Jan '21

06 Jan '21

4 3

[chirp_users] Setting CTCSS or Tone Codes
by John Elliott 06 Jan '21

06 Jan '21

I have completed these settings on my HAM radios just fine. On the two GMRS-V1 and the GMRS 50X1 radios that I have, I was informed by those who have done it, to set the "Tone Mode" to "TSQL", the "Tone" to 141.3 (example), the "ToneSql" to 141.3, and the "Cross Mode" to "Tone->Tone." The issue is, whenever I do this, the "Tone Mode" switches from "TSQL" now to "Cross" and the "Tone" is removed along with the "Tone->Tone". Can anyone tell me am I setting this up incorrectly? When uploading it with only the "Tone Mode" to "TSQL" and only the "ToneSql" tone number, leaving the "Cross Mode" blank, the radios will not open the repeaters. -- *Thanks, John KF7MUE* *GMRS-WRKD607*

3 3

[chirp_users] Yaesu FT-897D Upload Error
by D.J.J. Ring, Jr. 03 Jan '21

03 Jan '21

I can download from my Yaesu FT-897D successfully using CHIRP daily-20201221 on Linux - Debian GNU/Linux 10 (Python 2.7.16) but I cannot upload. I get the following error message. raise errors.RadioError("Failed to communicate with radio: %s" % e) RadioError: Failed to communicate with radio: Radio did not ack block 0 ERROR: ---------------- ERROR: Clone failed: Failed to communicate with radio: Radio did not ack block 0 ERROR: --- Exception Dialog: Failed to communicate with radio: Radio did not ack block 0 --- ERROR: None Full errors in attachment. Any suggestions? 73 DR N1EA

2 5

[chirp_users] BTech 5X3
by Dawn K 31 Dec '20

31 Dec '20

When I attempt to download from radio, I get this is an experimental driver do you wish to proceed ? I have confirmed that the radio is on the list supported by CHIRP, my phone is authentic as is my cable. I am new to ham radio and not sure if I should proceed.

11 27

[chirp_users] Help -> Show Information
by Allan Hall 30 Dec '20

30 Dec '20

2 2

Re: [chirp_users] Using premade cvs or execl spreadshee
by David Hartman 28 Dec '20

28 Dec '20

Make sure that "Treat successive delimiters as one" is not selected somewhere. Usually on the import dialog settings. Dave

1 0

[chirp_users] Using premade cvs or execl spreadsheet
by Glen Terry 28 Dec '20

28 Dec '20

Good morning, MERRY CHRISTMAS. In programming my Baofengs, I'm wondering how to convert pre done lists into the chirp to download to the radios. Sent from my Verizon Motorola Smartphone

6 10

[chirp_users] Are packages 64 bit?
by Don Brett 26 Dec '20

26 Dec '20

Hi, I'm new to this list, just a quick question; are the files on the download page all 64 bit? Thanks for the help, Don https://trac.chirp.danplanet.com/chirp_daily/LATEST/ -- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

4 3

[chirp_users] Baofeng UV-82HP Previous solution (from frequency to channel mode switching) does not work
by Kevin Evans 21 Dec '20

21 Dec '20

I tried the steps in the previously closed solution of downloading the file and using the Settings tab, then change the setting for VFO. However, I don't have anything under the "settings" tab. I do find VFOA and VFOB under the "browse"r tab on the left, which is under the blank "Settings" tab, but I don't have any info on what to put in Hex, Dec, Bin cells or which ones to use or not use. Any assistance would be appreciated Kevin

2 6

[chirp_users] Database import from Radioreference.com
by G-mail 18 Dec '20

18 Dec '20

Hi, When importing a database into CHIRP from Radioreference.com, it asks for: - Username - ok - Password - ok - Zip Code - I'm from Canada & the database is also. Which zip code should I use? I didn't enter an address on Radioreference & I don't see one associated with the database... ? - It is giving an error code: server raised fault: Invalid Country ID I have also tried to import via a CSV file, but so far I'm getting an error message, as it doesn't like the CSV formatting. Thanks! -- This email has been checked for viruses by AVG. https://www.avg.com

4 3