- Users - lists.chirpmyradio.com

[chirp_users] Yaesu FT-2600M and 2800M
by Michael Tortorella 08 Feb '21

08 Feb '21

Has anyone tried to use the 2800M programming software on the 2600M? These seem very similar radios so I thought I'd give this a try. But before I do, could I bork the 2600 completely if this doesn't work? TIA for any help, 73, Mike W2IY

1 0

Re: [chirp_users] Alinco DJ-VX50
by GRAND WILDLIFE CONTROL 08 Feb '21

08 Feb '21

Sorry for the vague question. We were inquiring about programming software through CHIRP. Much Thanks!

2 1

[chirp_users] Alinco DJ-VX50
by GRAND WILDLIFE CONTROL 07 Feb '21

07 Feb '21

Is there, or will there be a platform for the Alinco DJ-VX50? Thanks kindly, Scott

2 1

[chirp_users] Yaesu FT-2600, further thoughts
by Michael Tortorella 06 Feb '21

06 Feb '21

Folks, I am tempted to use the FT-2800 software to program my FT-2600M, based on the similarity of those two radios. Question is, if this is not a sane procedure and does not work, will I bork the 2600M beyond recovery? Thanks for your thoughts, 73, Mike W2IY

2 1

Re: [chirp_users] chirp_users Digest, Vol 146, Issue 4
by G Galaski 06 Feb '21

06 Feb '21

Is there a program for the Luiton LT-590 ? Thanks, Greg On 2/4/21, chirp_users-request(a)intrepid.danplanet.com <chirp_users-request(a)intrepid.danplanet.com> wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. Re: New Daily Build (Dan Smith) > 2. Re: Clone for BaoFeng 10W? (Jay Trobec) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 3 Feb 2021 17:50:13 -0800 > From: Dan Smith <dsmith(a)danplanet.com> > Subject: Re: [chirp_users] New Daily Build > To: Jim Unroe <rock.unroe(a)gmail.com> > Cc: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > Message-ID: <20C0786F-5792-4484-8097-6264EA8BBB8F(a)danplanet.com> > Content-Type: text/plain; charset=us-ascii > >> An issue was just opened because the recently added AnyTone radio >> models are missing. Could the same thing have happened causing the >> "future" module to be missing in the Mac build? >> >> https://chirp.danplanet.com/issues/8787 > > Well, this is different in that the Mac build is frozen and is the thing > missing the module. The App gets built just by jamming the updated python > files in during the build on a non-mac machine, whereas the windows > installer is built from pieces each time on an actual windows system. I > could jam the future module in there as well, but there are other problems > with that. I really want to try to get us off the legacy mac stack if > possible, but it's complicated. > > --Dan > > ------------------------------ > > Message: 2 > Date: Wed, 3 Feb 2021 20:51:44 -0600 > From: Jay Trobec <jay(a)trobec.net> > Subject: Re: [chirp_users] Clone for BaoFeng 10W? > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > Message-ID: > <CAF1A9uZxTU2pBbL=75KcWoG0hEHgaEj4NY78Q5MiQ7=WugxOSQ(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Bob: > Perfect! Thank you. > Jay > > > On Wed, Feb 3, 2021, 05:08 Robert Ankenbauer <bobank03(a)gmail.com> wrote: > >> Jay, >> >> Under supported radios >> >> https://chirp.danplanet.com/projects/chirp/wiki/Supported_Radios >> >> The UV-S9 should work if you use the BF-F8HP >> >> >> Thanks, >> >> Bob >> >> >> >> >> On Tue, Feb 2, 2021 at 9:11 PM Jay Trobec <jay(a)trobec.net> wrote: >> >>> Hi. Is there a clone available for the BaoFeng UV-S9 PLUS Tri-Band10W? >>> I've been trying various options but haven't been able to find anything >>> that works. >>> JT >>> >>> On Tue, Feb 2, 2021 at 8:06 PM Jay Trobec <jay(a)trobec.net> wrote: >>> >>>> Hi. Is there a clone available for the BaoFeng UV-S9 PLUS Tri-Band10W? >>>> I've been trying various options but haven't been able to find anything >>>> that works. >>>> JT >>>> >>> >>> >>> -- >>> *Jay Trobec, Ph.D., CBM, CCM* >>> >>> Chief Meteorologist, KELO-TV >>> 501 South Phillips Ave >>> Sioux Falls, SD 57104 >>> (605) 610-8414 >>> jaytrobec.com >>> >>> _______________________________________________ >>> chirp_users mailing list >>> chirp_users(a)intrepid.danplanet.com >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Bob at bobank03(a)gmail.com >>> To unsubscribe, send an email to >>> chirp_users-unsubscribe(a)intrepid.danplanet.com >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Jay Trobec at jay(a)trobec.net >> To unsubscribe, send an email to >> chirp_users-unsubscribe(a)intrepid.danplanet.com >

4 4

[chirp_users] PLEASE cut the rest of the, messages off (Was Re: chirp_users Digest, Vol 146, Issue 5)
by Dave B 05 Feb '21

05 Feb '21

Hi. In their defence, if the person concerned is using a phone or similar mobile device, their email clients editing facilities are "painful" in the extreme, even if they let you see what is left attached to what you are sending in reply, it is often difficult to impossible to edit or trim it. Even if it can be done, it is less than easy on a small mobile screen.. Some mailing lists, automatically limit the amount of included text, I don't know of this system has that facility. (But then sometimes you loose the message that is being replied to.) But yes, this (and the Elecraft list in particular) often suffers such issues with the digest mode. 73. Dave G8KBV. On 05/02/2021 20:00, chirp_users-request(a)intrepid.danplanet.com wrote: > rom: Chuck Hast <kp4djt(a)gmail.com> > Subject: Re: [chirp_users] chirp_users Digest, Vol 146, Issue 4 > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > Message-ID: > <CAN9xdP-dLxeyXdhVYi-mcUNf7TTRdUTTN-mU7vgOqRk1KbDD7g(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Folks, > When you send a reply to a digest PLEASE cut all of the rest of the > messages off, We have all seen it so just leave the part you are > replying to. > > On Thu, Feb 4, 2021 at 6:41 PM G Galaski <greg73g(a)gmail.com> wrote: > >> Is there a program for the Luiton LT-590 ? -- Created on and sent from a Unix like PC running and using free and open source software:

1 0

[chirp_users] Yaesu FT-2600/2800
by Michael Tortorella 05 Feb '21

05 Feb '21

Hi everyone, has anyone ever tried to program the 2600M using the 2800M software here? Any thoughts on 2600M programming? TIA for any help. 73, Mike W2IY

1 0

Re: [chirp_users] Clone for BaoFeng 10W?
by Jay Trobec 04 Feb '21

04 Feb '21

Hi. Is there a clone available for the BaoFeng UV-S9 PLUS Tri-Band10W? I've been trying various options but haven't been able to find anything that works. JT On Tue, Feb 2, 2021 at 8:06 PM Jay Trobec <jay(a)trobec.net> wrote: > Hi. Is there a clone available for the BaoFeng UV-S9 PLUS Tri-Band10W? > I've been trying various options but haven't been able to find anything > that works. > JT > -- *Jay Trobec, Ph.D., CBM, CCM* Chief Meteorologist, KELO-TV 501 South Phillips Ave Sioux Falls, SD 57104 (605) 610-8414 jaytrobec.com

2 2

[chirp_users] New Daily Build
by Build System 04 Feb '21

04 Feb '21

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20201221 A list of the changes included in this build (since the last daily) follows: Changes for Build #640 [Dan Smith <dsmith(a)danplanet.com>] Style fix related to patch for #8565 [Jim Unroe <rock.unroe(a)gmail.com>] [H777] Retevis H777 Plus This patch adds support for the Retevis H777 Plus (FRS/PMR) models with fixed antennas. Related to #8565 [Jim Unroe <rock.unroe(a)gmail.com>] [H777] Rework Serial Timeout The previous patch has broken uploads for the classic BF-888s radios and newer Retevis H777 models. The constanstant switching of the timeout to .5 before each block is sent and back to .25 after each block is sent on a Windows computer creates "noise" that causes the apparently "faster" radios to mis the "ack" returned by the radio which results in the upload failing. This patch resolves the issue by setting the serial timeout to .5 and leaving it remain that way for all serial activity. fixes #8197 [Jim Unroe <rock.unroe(a)gmail.com>] [RT22] Remove FRS and PMR446 Frequency Tables This driver was coded in a way that erasing a memory row would preselect the appropriate FRS or PMR446 frequency, bandwidth and transmit power level. This would similar to how the OEM programming software functions (actually the OEM software has the frequencies, bandwidth and power level settings fixed so that they cannot be edited). While getting ready to submit test images for these models, I rediscovered that the CHIRP test suite regards this as a memory that can't be erased and reports an error. This patch removes the frequency tables and other code related to this so that the test suite will pass when tested with the related "image" files. related to #6467 [Jim Unroe <rock.unroe(a)gmail.com>] [RT22] Add Retevis RT622 Model This patch adds support for the Retevis RT622 PMR446 version. related to #6467 [Jim Unroe <rock.unroe(a)gmail.com>] [RT22] Add Retevis RT22FRS Model This patch adds support for the Retevis RT22 FRS version. related to #6467 [Jim Unroe <rock.unroe(a)gmail.com>] [RT22] Add Radio ID to Retevis RT22 Driver Add additional radio ID and supporting code that is required to support currently shipping Retevis RT22 models and other similar variants. related to #6467 [Jim Unroe <rock.unroe(a)gmail.com>] [RT22] Retevis RT22 Driver Cleanup for better PEP8 Compliance Clean up driver before adding another radio ID and support for additional radio models. related to #6467 [Jim Unroe <rock.unroe(a)gmail.com>] [KT-8R] Add New MCU Version This patch adds an additional MCU Version to the support for the QYT KT-8R fixes #8513 [Brad Schuler <brad(a)schuler.ws>] [anytone_iii] Naming convention cleanup (issue #8503) [Mark Leigh <mark.leigh(a)shaw.ca>] Added methods and UI to query/import RadioRef.com for Canada. Fixes #8021 My first foray into Python, so forgive anything that's not optimal. user: Mark Leigh <mark.leigh(a)shaw.ca> branch 'default' changed chirp/directory.py changed chirp/radioreference.py changed chirp/ui/mainapp.py

11 16

[chirp_users] Yaesu FTM-400XD
by Mike Markowski 03 Feb '21

03 Feb '21

In the hope of supporting the ftm-400xdr, over the course of 2 months I wrote twice to Yaesu asking if a programming guide is available. Both times, no reply. Yet their tech support replies quickly (relatively speaking!) to other questions. Does anyone know of a source for the info, better email address, etc.? Tnx es 73! Mike ab3ap

2 1