- Users - lists.chirpmyradio.com

New chirp-next build
by donotreply＠chirpmyradio.com 04 Apr '25

04 Apr '25

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since the last build and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: https://chirpmyradio.com/projects/chirp/wiki/Download A list of changes since the last build are here: bc27f665 TH9000: Add programmable buttons to settings. 8ca56d44 tk280: Fix choosing highest applicable tuning step bb857b11 Change lower bound valid_bands acceptance test 45ea1202 Simplify required_step() to honor the allow list 389b27c9 Fix two unused globals for new flake8 cec1d4b3 ic9700: Decode cross tone modes 66c3d7d4 KG805G fix: Duplex field calculated wrong 6a9dec97 tk8180: Fix choosing max step f0d7807f tk8180: Fix 12.5kHz-required step frequencies Issues addressed in this build: [Bug 11911] IC-9700: Unable to set Cross tone modes --

1 0

Can not get Chirp Linux or Windows to work with Yaesu VX5R, FT60R, VX150 or TYT UV8000D
by David Marshall 04 Apr '25

04 Apr '25

I can not get Chirp to work with anything. I have a RT Systems USB-57A cable and the TYT cable that came with the radio. I am aware of the problem with bootleg Prolific hips for the TYT cable, and have installed the appropriate driver from: https://www.miklor.com/COM/UV_Drivers.php#install I am using a computer with an Asus ROG Strix B365F motherboard that dual boots Windows 10 and PCLinuxOS Debian Edition. I have tried known working USB ports on both the back and front of the computer. I have also tried an HP laptop running Windows 11 with the FT60R. Just for the record, I have also tried an extremely old copy or RT Systems ADMS-1E in Windows with the VX5R, and FT60 Commander, and the free TYT software for the UV8000D. On the FT60R and VX5R, after trying to read from the radios, I get a "Clone Error" on the radio display. When trying to read from the UV8000D, it appears to start, but the progress bar never goes beyond 0%. My primary need is getting the TYT UV8000D programmed because that thing is impossible to program with the keypad. Knowing that my problem is not just with Chirp on Windows 10, 11 and Linux, but also with other software, does anyone have some ideas to try other that buying RT Systems software and cables? Thank you, 73 de N8OAY

1 0

220 BAND
by Ricardo Duran 29 Mar '25

29 Mar '25

hI I read somewhere that the CHIRP program for Baofeng Radios such as the UV-5R III model drops the capability of programming in the 220 input/output frequencies. This model is supposed to operate on the three bands. Everything else seems to work just fine as far as programming the radio. Your program is wonderful. I am using the latest version of CHIRP. Am I not doing something correctly?. Or is this simply a limitation to the program? Thank you in advance for whatever help you can provide, 73, de Ric WD7U

2 2

Re: Retevis H777 Unable to Connect
by Joshua Morin 28 Mar '25

28 Mar '25

Confirming factory software works.

3 2

New chirp-next build
by donotreply＠chirpmyradio.com 28 Mar '25

28 Mar '25

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since the last build and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: https://chirpmyradio.com/projects/chirp/wiki/Download A list of changes since the last build are here: 906aa970 Wouxun KG-805g: Add new radio driver cb06abfd Updated Italian Translation de4bdc44 Initial support of QYT KT-5000. 7f63cf04 Updated Spanish Translation 74d862ef kg816/818: Fix query string processing 3cae2992 add UV21ProV2 and UV21ProGPS f3d71bf8 Disable immutable mem.extra in expanded memory editor 1ea297cf update upper frequency limit that is displayed in validation error message Issues addressed in this build: [Bug 11208] Having Problem Downloading [Bug 11904] Name column gets disabled (not reflected in UI) if extra is added to immutable [New Model 10530] QYT KT-5000 [New Model 11214] Wouxun KG-805G [New Model 7781] Wouxun KG-805 --

1 0

Possible Bug In TD H3 In Chirp
by K0LNY ?? 25 Mar '25

25 Mar '25

Hello All, I don't know if this is a bug in Chirp or what, but I am using the open firmware on the Tid TD H3, which is the Ham version of that radio, and for the life of me, I could not get a GMRS repeater in my area to work from a programmed channel that I put in with Chirp. So last night I put a channel in by hand, and set it to a number, and that works. So, it isn't the radio, with this issue. Glenn You're never too old to learn something stupid. Glenn K0LNY & WSAT439

1 0

TID TD H3 Channels That Chirp Complains About
by K0LNY ?? 24 Mar '25

24 Mar '25

Hello, Well last night I finally got my 64 channels into the radio with Chirp. The newest Chirp I grabbed yesterday may have done the trick, but even that didn't work at first. Anyway, there are still two channels that I may have the lines wrong on, and one imports to the radio with Chirp, but does not work, and the other errors with Chirp, and I am wondering if there is something with these lines that need fixing. One is for my FM transmitter in my house, it transmits at 86.99 mhz. I can pick it up with my H3 by toggling to FM with the bottom side key and entering the frequency. The other problem channel is an AM airband frequency, and this radio is supposed to receive AM airband. Chirp says it should not use duplex, and I either have zero or nothing in that field, so I don't know why Chirp complains about that. I'll paste the lines below in case anyone cares to make suggestions for changes. Thanks. Glenn 64 HomeFM 87 FM 63 AIRPRT 122.7 5 88.5 88.5 23 NN 23 Tone->Tone AM 5 Glenn K0LNY & WSAT439

1 0

import errors on a tidradio H3
by K0LNY ?? 23 Mar '25

23 Mar '25

Hello folks, I'm struggling with trying to import a CSV into Chirp. I download from my radio, and save to CSV, and then edit the CSV, and Chirp gives me an error message, which I'll paste below. After that error message is okayed, I get the error, invalid file format. Thanks for any ideas. I've had others look at it, and they can't tell what is wrong here. Glenn Import messages Line 2: [cross_mode] Invalid cross mode 'Tone+AC0APg-Tone' Line 3: [cross_mode] Invalid cross mode 'Tone+AC0APg-Tone' Line 4: [cross_mode] Invalid cross mode 'Tone+AC0APg-Tone' Line 5: [cross_mode] Invalid cross mode 'Tone+AC0APg-Tone' Line 6: [cross_mode] Invalid cross mode 'Tone+AC0APg-Tone' Line 7: [cross_mode] Invalid cross mode 'Tone+AC0APg-Tone' Line 8: [duplex] `+AC0-' is not in valid list: ['', '+', '-', 'split', 'off'] Line 9: [duplex] `+AC0-' is not in valid list: ['', '+', '-', 'split', 'off'] Line 10: [cross_mode] Invalid cross mode 'Tone+AC0APg-Tone' Line 11: [cross_mode] Invalid cross mode 'Tone+AC0APg-Tone' Line 12: [cross_mode] Invalid cross mode 'Tone+AC0APg-Tone' Line 13: [cross_mode] Invalid cross mode 'Tone+AC0APg-Tone' Line 14: [cross_mode] Invalid cross mode 'Tone+AC0APg-Tone' Line 15: [cross_mode] Invalid cross mode 'Tone+AC0APg-Tone' Line 16: [cross_mode] Invalid cross mode 'Tone+AC0APg-Tone' Line 17: [cross_mode] Invalid cross mode 'Tone+AC0APg-Tone' Line 18: [cross_mode] Invalid cross mode 'Tone+AC0APg-Tone' Line 19: [cross_mode] Invalid cross mode 'Tone+AC0APg-Tone' Line 20: [cross_mode] Invalid cross mode 'Tone+AC0APg-Tone' Line 21: [cross_mode] Invalid cross mode 'Tone+AC0APg-Tone' Line 22: [cross_mode] Invalid cross mode 'Tone+AC0APg-Tone' Line 23: [cross_mode] Invalid cross mode 'Tone+AC0APg-Tone' Line 24: [cross_mode] Invalid cross mode 'Tone+AC0APg-Tone' Line 25: [cross_mode] Invalid cross mode 'Tone+AC0APg-Tone' OK Glenn K0LNY & WSAT439

2 1

New chirp-next build
by donotreply＠chirpmyradio.com 21 Mar '25

21 Mar '25

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since the last build and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: https://chirpmyradio.com/projects/chirp/wiki/Download A list of changes since the last build are here: 01cf01ca Fix radio prompt disable flag checking 0b63fe2d Fix scrolling in "info" tab 936229ab fix "cloning from" to cloning to" message 5788e55a IC-T10: Adding Icom IC-T10 driver. Fixes #10181 07381a94 Add Baofeng K61 model alias 798e6ead Compress F8HP Pro and BFK6 memory maps 735513cb baofeng_uv17Pro.py: add Baofeng_K6 - for #11507 a8333736 baofeng_uv17Pro.py: address 'DeprecationWarning' issues - prep for #11507 12a6f646 baofeng_uv17Pro.py: address 'FutureWarning' issues - prep for #11507 9057aa4b RT-470X: Adds NAM mode ba9ef5ce mml_jc8810: Enables Scramble and Encryption feature 7d0a609a Fix Baofeng K5-Plus marked as unconfirmed for py3 176ae17e Fix FM-converted D-STAR repeaterbook entries 0cc95c5d baofeng_uv17Pro.py: correct DTMF mapping - fixes #11894 205342f0 Related to #11882 Add roger beep list for TD-H3 e387509a Add Support for Wouxun KG-935H 3bb24886 Fix GMRS negative offset in band plan Issues addressed in this build: [Bug 11396] Tidradio TD-H8 Chirp driver allows only repeaters in memory channels [Bug 11882] Options to choose from in "Battery Save" [Bug 11892] multi-mode repeaters rejected when they have valid analog config [Bug 11894] baofeng_uv17Pro driver has incorrect DTMF mapping for *, #, A, B, C, D [Bug 11896] Works on the Baofeng k5 plus [Bug 11898] Developer Mode - Unable to scroll all items under "Info" [Bug 11901] Yaseu VX3 no longer showing prompts [Feature 11899] Add Scrambler to RT-470X [New Model 10181] Icom IC-T10 [New Model 11507] Baofeng K6 and K61 [New Model 11779] KG-935H --

1 0

Re: Retevis H777 Unable to Connect
by Joshua Morin 17 Mar '25

17 Mar '25

Ticket was created as suggested. https://chirpmyradio.com/issues/11787 I believe the debug file has errors using all available options. Let me know if I am missing something. Josh

2 1