- Users - lists.chirpmyradio.com

New chirp-next build
by donotreply＠chirpmyradio.com 21 Aug '24

21 Aug '24

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: https://archive.chirpmyradio.com/chirp_next/next-20240821 A list of changes since the last build are here: 02f2d727 Update locale for recent changes fbe972cd uvk5: Bless 5.00.x firmware versions d86e626d uvk5: Add a restricted version for unsupported firmwares ea606c01 Mark extra columns immutable if mem.extra is bf97426c Fix setting extra comment if immutable 459cbaee ft70: Remove incorrect lowercase support 2eeb42f5 ft4: Make a few strings translatable. 63be12ae uvk5 driver to reference chirp_common ctcss/dtcs codes bc64f9dd Add welcome screen images for Bulgarian 17bfbf10 RT490: Add supported charset - Fixes #11020 - Fixes #11309 Issues addressed in this build: [Bug 11020] lowercase characters etc. not supported [Bug 11414] String "Cloning from radio" not translated [Bug 11479] CHIRP next-20240814 allows lower case on Yaesu FT-70DR [Bug 11483] ERROR: Radio serial detection failed: Firmware '5.00.05' [Feature 11309] Radtel RT - 490 --

1 0

Retevis cable issue
by Anael Cyberjinh 19 Aug '24

19 Aug '24

Hello I just brought a Retevis RA89 with the 2 Pin Cable from retevis too I use Arch Linux / Debian. I installed chirp without issue But now when I connect my radio to my computer I am unable to get it work I contact the seller who tell me to use windows … I've got this in the dmesg log [sam. 17 août 11:22:17 2024] usb 1-9.4: new full-speed USB device number 11 using xhci_hcd [sam. 17 août 11:22:17 2024] usb 1-9.4: device descriptor read/64, error -32 [sam. 17 août 11:22:17 2024] usb 1-9.4: device descriptor read/64, error -32 [sam. 17 août 11:22:17 2024] usb 1-9.4: new full-speed USB device number 12 using xhci_hcd [sam. 17 août 11:22:17 2024] usb 1-9.4: device descriptor read/64, error -32 [sam. 17 août 11:22:17 2024] usb 1-9.4: device descriptor read/64, error -32 [sam. 17 août 11:22:17 2024] usb 1-9-port4: attempt power cycle [sam. 17 août 11:22:18 2024] usb 1-9.4: new full-speed USB device number 13 using xhci_hcd [sam. 17 août 11:22:18 2024] usb 1-9.4: Device not responding to setup address. [sam. 17 août 11:22:18 2024] usb 1-9.4: Device not responding to setup address. [sam. 17 août 11:22:18 2024] usb 1-9.4: device not accepting address 13, error -71 [sam. 17 août 11:22:18 2024] usb 1-9.4: new full-speed USB device number 14 using xhci_hcd [sam. 17 août 11:22:18 2024] usb 1-9.4: Device not responding to setup address. [sam. 17 août 11:22:19 2024] usb 1-9.4: Device not responding to setup address. [sam. 17 août 11:22:19 2024] usb 1-9.4: device not accepting address 14, error -71 [sam. 17 août 11:22:19 2024] usb 1-9-port4: unable to enumerate USB device Have you any idea how can I get the communication between my computer and the radio is possible with Linux ? I find this topic https://vk2.net/articles/Retevis-RT3S-on-a-Mac-or-Linux-PC I am not reassure … I also checked https://chirpmyradio.com/projects/chirp/wiki/CableGuide and i think i need a specific cable but not sure to understand well ? Regards

6 6

Repeater programming with CHIRP
by radkins01＠live.com 19 Aug '24

19 Aug '24

Hi all, just a quick question or two: I'm using the latest build of CHIRP, and when I populate a list of repeaters, the program enters *every freaking repeater in Florida*, which is like a gazillion. I only want repeaters within 100 miles (or less) of me here in the greater Tampa Bay area. I tried to remove some of the entries but that doesn't work. How can I tell CHIRP that I only want repeaters within a certain set of parameters? There doesn't appear to be a way to be more selective with the program. ANY assistance appreciated! Thanks.... Rick KE4EXZ

3 2

Program Memory Banks in Yeas VX170
by bmgalante＠icloud.com 17 Aug '24

17 Aug '24

I have two Yeasu FT 7800R and VX170. After downloading from the FT7800R I can see the MEMORY, BANK, And SETTIN tabs at the top of the file. However when downloading there VX170 I have only the memory tab at the top of the file and it does nothing. In the FT7800R I can move and load memory banks. in the VX170 cannot load or move memory. any Idea ??? Thanks Bob

1 0

New chirp-next build
by donotreply＠chirpmyradio.com 14 Aug '24

14 Aug '24

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: https://archive.chirpmyradio.com/chirp_next/next-20240814 A list of changes since the last build are here: a8cdf67e ga510v2: Fix power level handling 318c4ca1 tdh3: Fix VFO power level settings cd22bf0d uv17Pro: Note the A/B selection byte 5df47590 Add Radioddity DB50 model alias 6f51ed11 btech: Handle out-of-range reset time setting 653b509c thd8: Fix ham model RX-bands 0010388d Add padding support to icf.warp_byte_size Issues addressed in this build: [Bug 11461] QYT KT-8900 Settings Medu [Bug 11471] TIDRADIO TD-H3 power levels for A / B VFO are have incorrect options [Bug 11475] V2 Radioddity GA-510 Does Not Support High Power [Feature 11452] Baofeng 5RM A/B selection [Feature 11473] Inability to program "monitoring" frequncies Tidradio H8 [New Model 11472] Radioddity DB50 --

1 0

FRS Channel Won't Go Into TD H3
by K0LNY ?? 14 Aug '24

14 Aug '24

Hi, I have a TID TD H3. I used Chirp to pull in the FRS channels that is an option under "file". One channel went in, but the ones before this one and after it did go in. So, my radio jumps from channel 26 to 28 as I have them programmed in. I think it would be channel #17 if I had started at #1 with these. Here's the channel inputs from the CSV file: 27 FRS 17 462.6 5 88.5 88.5 23 NN 23 Tone->Tone NFM 12.5 5.0w * Can anyone suggest what I can do to make this channel available? Thanks Glenn Change is inevitable, except from a vending machine. Glenn K0LNY & WSAT439

1 0

New chirp-next build
by donotreply＠chirpmyradio.com 07 Aug '24

07 Aug '24

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: https://archive.chirpmyradio.com/chirp_next/next-20240807 A list of changes since the last build are here: a8242df7 ksun_m6: Fix initialization of new memories 1eee07b8 retevis_rt21.py: Add Retevis RB89 - fixes #11465 82f80107 retevis_rt21.py: fix incorrect DTCS mask - fixes #11467 Issues addressed in this build: [Bug 11467] retevis_rt21.py - writes invalild DTCS (aka DCS) codes for many radio models [New Model 11465] Add Retevis RB89 --

1 0

Download Link
by K0LNY ?? 05 Aug '24

05 Aug '24

Hello, could someone please send me a direct link to the Chirp download page? I need to try to update my chirp because I'm not able to paste more than the first line into the memories of my TD H3. I'm hoping an update of chirp will fix this. I go to: https://chirp.danplanet.com/projects/chirp/wiki/Download# and every instance of download takes me to a page with some freeware crap. I've gotten four or five different freeware pages trying a couple download links on this page. I'm trying to get the chirp next for windows. Thanks. Glenn Change is inevitable, except from a vending machine. Glenn K0LNY & WSAT439

1 0

Memories Import behavior questions
by Eric 29 Jul '24

29 Jul '24

I would like to get confirmation that the "Import" of "Memories" actually works the way I think it does and that my limited testing seems to confirm. If I have a CSV file that contains more "Memories" than the radio supports, it appears that the "Import" function imports the number of entries from the file that the radios supports, where the "channel number" is valid for that radio. For example: Using a CSV file that contains entries for 999 channels (including blank channels) 1. A radio that supports 127 memory channels will import the entries from the CSV file with "channel numbers" 0-127 and ignore the entries with "channel numbers" greater than 127 2. A radio that supports 250 memory channels will import the entries from the CSV file with "channel numbers" 0-250 and ignore the entries with "channel numbers" greater than 250 3. A radio that supports 999 memory channels will import all of the channels in the CSV file. This seems to be the behavior on the radios I have tried, but I only have 4 different models of radios to test with, so I want to confirm this. Is this correct? Thanks, Eric You don't see psychotic coming Religion is for people who are afraid of hell, spirituality is for people who have already been there. (Lakota Nation) Recognize: You will never change something you are willing to tolerate.

3 4

trying to paste into the main window
by K0LNY ?? 29 Jul '24

29 Jul '24

Hello All, This used to work in the old Chirp, that is, I'd open a CSV file, and copy and paste into the memories page and write to the radio. I have a TIDradio TD H3, and I exported to CSV, and pasted in stuff from other CSV files from other Chirp radios, and only two channels go into the radio. I tried to open a chirp in an old windows 7, because this still works in that Chirp, but this model is not in that version of Chirp. I'll attach the file, in case someone thinks there is a problem with the file. I have higher bands in this file, because this radio can RX these lower frequencies. Thanks for any assistance. Glenn Change is inevitable, except from a vending machine. Glenn K0LNY & WSAT439

1 0