October 2024 - Users - lists.chirpmyradio.com

Power-On messages inop in new GT3-TP?
by Ceferino Lamb 15 Oct '24

15 Oct '24

I got a few new GT3-TP spares, and programmed them with CHIRP as usual. Something's changed in the startup display at boot. I use two parameters under "Setting/Other Settings" to display my CHIRP version level and my call sign on boot: Power-On Message 1 used to display on the 1st line Power-On Message 2 used to display on the 2nd line (both briefly on boot) Now, neither works. "GT-3" displays on the 1st line "MARK III" displays on the 2nd line And the 6+Power-On Message settings seem to also be ignored. They are also greyed out in CHIRP, cannot be changed. Anybody BTDT? Got a remedy? I already jailbroke the new units with a hard factory reset. -- //CRL Quis custodiet ipsos custodes?

3 6

New chirp-next build
by donotreply＠chirpmyradio.com 14 Oct '24

14 Oct '24

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: https://archive.chirpmyradio.com/chirp_next/next-20241014 A list of changes since the last build are here: 19dce52d btech.py: QYT KT8900D add new mcu version - fixes #11601 9272fbc5 btech.py: QYT KT8900 add new mcu version - fixes #11559 bdec5396 btech.py: Radioddity QB25 add new mcu version - fixes #11443 80187f9d rt470x: Support 18MHz-1G per new firmware changes 0d1e1f5b bff8hppro: Fix to include mid power level 5ef813b1 anytone: Fix missing DTCS->DTCS cross mode 5251c1c8 Updated Spanish Translation f691fa98 Adjust about box with license header 387d8f63 rt98: Add support for firmware V101 Issues addressed in this build: [Bug 11443] Radioddity QB25 "Radio identification failed" [Bug 11559] New QYT KT-8900 Radio Identification Failed [Bug 11584] Retevis RT98v 1.03 Unsupported by CHIRP [Bug 11601] KT-8900D radio identification failed [Bug 11606] Baofeng BF-F8HP-PRO missing Mid power level option [Bug 11608] Anytone AT-5888UV programming bug [Feature 11605] Add 2.13c Firmware AM/FM modulation to RT-470X --

1 0

Re: setting up Scanner function UV-5R family
by larry louree 12 Oct '24

12 Oct '24

John: A very logical question. No only do I have the NWS 6 or 7 broadcast channels, I also have the two Skywarn channels for my home area, as well as some Fire and EMS dispatch channels in my home area. This 'odd' group allows me to move around the state (in Florida) and not have to specifically program or dial to the specific channel. It's something I want to try now that I know what the TO/CO/SE designations mean. Thanks for your help on this. Larry Message: 2 Date: Wed, 9 Oct 2024 19:44:25 -0400 From: John Wuest <jhwuest(a)gmail.com> Subject: [users] Re: Setting up Scanner function UV-5R Family To: CHIRP users list <users(a)lists.chirpmyradio.com> Message-ID: <CABdgqVegASnBfsqwpCQEMi==4DEGk0t7i1cYz_FHn76zzeJ2Mg(a)mail.gmail.com> Content-Type: text/plain; charset="UTF-8" I'm curious why you want to scan the NWS frequencies. Generally, there is only one that covers your geographical area and the others are out of range. Also, because they never stop transmitting, your radio will stop on it every scan cycle. On Wed, Oct 9, 2024 at 4:48 PM larry louree via Users < users(a)lists.chirpmyradio.com> wrote: > I have one of my UV-5R that receives well, so want to us it to scan NWS > channels here to support my Skywarn activities. > > I went to Chirp, on the Advanced Settings Tab and found "Scan Resume". My > choices are: > > TO > CO > SE > > what do each of these do if I add them to my set up for the radio. > > Thanks. > > Larry > > Larry Louree, PMP > Problem Solver > Palmetto, Florida 34221 > cell: 407-697-1869 Larry Louree, PMP Problem Solver Palmetto, Florida 34221 cell: 407-697-1869

2 1

Re: Setting up Scanner function UV-5R Family
by Rich NE1EE 10 Oct '24

10 Oct '24

Actually, Jim responded. I use the 5R, so I followed his instructions just to see the result. I stumbled a bit, because "scroll down to the Detailed Menu Reference" is really "Menu Definitions - Detailed", and my brain was programmed to skim for "Detailed". Persistence helped ;-) But sure enough, the answer is there. Thanks to you both. I updated my notes to "UV-5R scan options: TO=pause on channel; resume after preset time. CO=stop on carrier detect; resume when carrier drops. SE=stop on carrier detect; resumed by user." ...but it has been a while since I used scan on either of my 5R models, so I don't recall what happens with SE. I'll have to read the manual and test. Does it: 1. When SE is active and stopped on a channel, and the user presses SCAN, radios will pick up the scan at the channel point following, and resume scanning. 2. Go back to the beginning of the scan programmed list, and begin again. 3. Start the scan with the current channel, which may still be active. In this case, the user must manually step ahead, then press SCAN. ISTR that the 5R will resume scanning (SE mode) with the next scan channel, when the user triggers SCAN. ~R~ On 2024-10-09 20:35:, Gary Chesshir via Users wrote: >I haven't seen anyone answer your question. TO is stop on search and resume after preset time. Usually 5 sec. CO will stop when detects carrier and resume when carrier drops and SE will stop on signal and remain there until acted upon by user. > >Hope this helps you understand the 3 choices.

1 0

Setting up Scanner function UV-5R Family
by larry louree 09 Oct '24

09 Oct '24

I have one of my UV-5R that receives well, so want to us it to scan NWS channels here to support my Skywarn activities. I went to Chirp, on the Advanced Settings Tab and found "Scan Resume". My choices are: TO CO SE what do each of these do if I add them to my set up for the radio. Thanks. Larry Larry Louree, PMP Problem Solver Palmetto, Florida 34221 cell: 407-697-1869

5 4

TYT 7900
by John Oliver 06 Oct '24

06 Oct '24

CHIRP has an entry for the 7800. It connected to my radio but with a dire warning about how awful things could happen. Has anyone had this work, or made their radios explode? I'm worried!

6 7

Unsubscribe
by Ace Vera 06 Oct '24

06 Oct '24

Good morning, I would like to unsubscribe from the emails.

2 1

New chirp-next build
by donotreply＠chirpmyradio.com 03 Oct '24

03 Oct '24

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: https://archive.chirpmyradio.com/chirp_next/next-20241003 A list of changes since the last build are here: 9df6bc92 Update detected models label generation and test 325beeed icw32: Add 12.5kHz tuning step a7f5acdb Add TYT TH-7900 model to alias map 5083fe65 uvk5: Add OSFW-bd90ca3 as found in the wild c09d51c5 btech: Handle failure to decode FM presets fdc91bf9 Add Baofeng BF-F8HP-PRO Issues addressed in this build: [Bug 11420] ICOM W32A 12.5 tuning step [Bug 11488] UV-K5 Not recognising firmware OSFW-bd90ca3 [Bug 11574] Found Invalid BCD Encoding - QYT KT-8900 settings tab error pop up after dowloading [New Model 11572] Baofeng BF-F8HP-PRO [New Model 11579] TYT TH-7900 --

1 0

Once again the old Icom IC-W32E
by Libor Matous 02 Oct '24

02 Oct '24

Hello, please help. I have an Icom IC-W32E radio and the python file icw32.py works great. https://chirpmyradio.com/issues/280 But it does not support 12.5kHz tuning step. Would it be possible to add support for tuning step 12.5 kHz to the PY file?? Thank you Libor

5 4

Editing entire column
by cmgam＠sapo.pt 02 Oct '24

02 Oct '24

Hi As the title says, I would like to know if it is possible and how to edit an entire column with the same value without going cell by cell. Thanks in advance Regards

2 2