November 2023 - Users - lists.chirpmyradio.com

[chirp_users] Stable low cost radio with flat audio
by Chuck Hast 09 Mar '24

09 Mar '24

I am asking this question here as I believe there is a good collection of folks who are familiar with different radios. Of course whatever is recommended I hope it can be programmed with Chirp. I am looking for a handheld radio that can do 12.5khz bw audio that can be used for data. I would hope it would have a flat audio in/out port but if not mods are part of the game. It needs to be frequency stable (I will be using it for data) and 12.5khz channel widths. and of course programmable with Chirp. The radio cost needs to be low, I would like to keep the whole project under $500. I will need two radios 1 for RX and 1 for TX. There will be a controller involved. If need be I will put each radio in a can for isolation. This is for a solar project so that is also part of the reason to try to use a handheld. -- Chuck -- KP4DJT HamHotline # 11259

5 5

[chirp_users] Install experience on Linux Mint 21.2
by Matt Foster 30 Nov '23

30 Nov '23

I had been using Chirp on Windows 11 without issue, but I decided I wanted to give it a shot on my Mint 21.2 (Victoria) laptop. The following is what I noted. FWIW...I consider myself to be pretty well-versed in Linux, although my experience with Ubuntu-based distros is lesser and more recent. - Installed the dependencies with 'apt install' with no issue. - "managed flag" vs "no managed flag"...I wasn't sure what this meant, and there isn't any explanation other than Ubuntu and Debian version numbers. It looks like maybe it has something to do with Python virtual environments. I had to dig around a little to find that my Mint version is based on Ubuntu 22.04 LTS, so NO "managed flag". I feel like other, less experienced, Linux users might struggle a bit to figure this out. - I had downloaded the latest .whl file into ~/Downloads, so...'pip install Downloads/chirp-blah.whl'. This worked fine, and chirp launches out of ~/.local./bin. - A step could be saved if pip were just pointed to the whl file online. Would it be possible to have something like 'chirp-latest.whl' that links to the latest version? Overall, it was pretty smooth and I completed the steps in about 10 minutes, including figuring out the Mint vs Ubuntu version thing, although I have not yet had Chirp communicate with a radio! ;-) -- 73, Matt, N0EYE

1 0

[chirp_users] I'll use the old version for now... Thanks.
by Bruce 30 Nov '23

30 Nov '23

OS: Linux Mint v20.3 Uma Python installs are so unwieldy... Why would anyone choose that over C++ Source ?! Did as instructed for the install of the .whl file, made sure all the depends where there (I already had all of the most recent versions installed). Ran the command for the UnManaged (Ubu v22.10<) on the wheel file, and got interpreter failure... Will try running it directly on the tar.gz archive, but not hopeful. Unless the snake is pretty smart. Compiling and installing from 'C' has always worked well. But I've had nothing but problems with Py3.9 -- 73 4 Now, Bruce

2 1

[chirp_users] This is exactly what I'm talking about...
by Bruce 30 Nov '23

30 Nov '23

First off, I want ALL the user accounts (all me) to be able to access chirp, If I'm logged in to my GMRS account I want to use chirp to program THOSE radios, if I'm logged in under my Amateur Call I want to use chirp THERE to program my Ham Rigs... And have the associated data files available THERE... After reinstalling Py3.9 a couple times I FINALLY got chirp to install, but not without complaining about the out of date pip util. So I followed the instruct on how to upgrade that, and v21.3.1 is STILL being used. <sigh> Even though the upgrade to v23.3.1 succeeded. So I tried the install of chirp under another user and got an OSError Permission failures, so I 'sodo'd it and THIS is what I got... C was SO much more straight forward... WTF is 'testresources' ?! Tried it in a 'virtual environment' first and we know how THAT worked... And I *DID* upgrade pip you daffy computer !!! And WHY is there any "uninstalling" going on !?!? I guess if a Python is going to kill it's prey, it needs to confuse it first... Like I said, I think I'll stick with the old version of chirp, if what I've done here hasn't totally FUBAR'd that up... ============= Successfully uninstalled future-0.18.2 ERROR: pip's dependency resolver does not currently take into account all the packages that are installed. This behaviour is the source of the following dependency conflicts. launchpadlib 1.10.13 requires testresources, which is not installed. Successfully installed certifi-2023.11.17 charset-normalizer-3.3.2 chirp-20231129 future-0.18.3 idna-3.6 importlib-resources-6.1.1 pyserial-3.5 requests-2.31.0 six-1.16.0 urllib3-2.1.0 yattag-1.15.2 zipp-3.17.0 WARNING: Running pip as the 'root' user can result in broken permissions and conflicting behaviour with the system package manager. It is recommended to use a virtual environment instead: https://pip.pypa.io/warnings/venv WARNING: You are using pip version 21.3.1; however, version 23.3.1 is available. You should consider upgrading via the '/usr/bin/python3.9 -m pip install --upgrade pip' command. -- 73 4 Now, Bruce

2 2

[chirp_users] I give Up !!! Please go back to C...
by Bruce 30 Nov '23

30 Nov '23

Traceback (most recent call last): File "/home/sysop/.local/bin/chirp", line 8, in <module> sys.exit(chirpmain()) File "/home/sysop/.local/lib/python3.9/site-packages/chirp/wxui/__init__.py", line 65, in chirpmain import wx File "/usr/lib/python3/dist-packages/wx/__init__.py", line 17, in <module> from wx.core import * File "/usr/lib/python3/dist-packages/wx/core.py", line 12, in <module> from ._core import * ModuleNotFoundError: No module named 'wx._core' -- 73 4 Now, Bruce

3 2

[chirp_users] CHIRP Tips: Advanced Editing
by Dan Smith 29 Nov '23

29 Nov '23

Hi all, I posted another "CHIRP Tips" video, this time on advanced editing techniques. This covers a number of tools CHIRP provides for bulk editing, organizing, and arranging memories. https://youtu.be/9UgJjwaXlrY Hopefully there's at least one tip in there you didn't already know about! --Dan

4 6

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 29 Nov '23

29 Nov '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: 016475bd ft1d: Fix failure to encode callsign ee751584 uv17Pro: Fix handling out-of-range hangup time --

1 0

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 28 Nov '23

28 Nov '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: 5ac5cb69 Updated Spanish Translation (#827) 0a6397c3 Update test matrix for UV-17 variants 346a3087 Added driver for Baofeng UV-17 fixes #10865 df11f150 Refactor UV-17Pro driver for UV-17 reuse 81a221d8 repeaterbook: Support digital-as-FM conversion cef97bab update chirp.desktop change MimeType from directory to app-specific, fix bug #2955 --

1 0

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 25 Nov '23

25 Nov '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: c315781d Removed unnecessary lines and fixed some bugs 3c1ff5b1 Disable match_model PR check because it's too dumb e21d78a8 Update locale files for rt490 85a22f8d Add Radtel RT490 - fixes #9665 53765302 th_uv88.py: Add Retevis RA89 - fixes #10821 5732be40 th_uv88.py: Address 'DeprecationWarning' messages --

1 0

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 23 Nov '23

23 Nov '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: 468da8c3 mml_jc8810.py: Add Radtel RT-470X firmware v2 support - fixes #10915 caa72570 mml_jc8810.py: address Deprication Warnings c7b3aa6e Update turkish language 71fa3f40 Updated Spanish Translation e424cdd1 yaesu ft-4xe: retry command multiple times when radio responds with not ack. Fixes #10198 0b311fc0 Added a driver for the Baofeng UV17 Pro and Pro GPS a1331151 Add a note to PR guidelines about commit messages cf4eefd0 Only check added python files for sameness 2f28fccd Change common-file check definition --

1 0

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 20 Nov '23

20 Nov '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: 00658341 tmd710: Fix some non-byteclean serial activity 7fd60d4e th_uv8000: Corrected upload & download prompt text. 525facfe Updated Spanish Translation 6605759e baofeng_common.py: fix dropped byte issue - fixes #10505 --

1 0

[chirp_users] "Power-On Password Protection" setting for UV-K5?
by Western Retro 19 Nov '23

19 Nov '23

Looking for the field to set a power-on password for the UV-K5. I don't see it in the settings tabs.

1 0

[chirp_users] Yaesu FT-60R issue and fix endorsement
by jerry 10 Nov '23

10 Nov '23

Hi, I just wanted to endorse the "fix" that I gathered from the back and forth dialog on the issues board. I, too, found that I could download from the radio fine but it simply wouldn't upload. Seeing the OP got things to work with a new cable from BlueMax49ers.com I went ahead and ordered one although I could not see how the cable I used for years with other Yaesu radios did not work. Amazingly, the CT-91 BlueMax cable worked immediately and I just wanted to further endorse this "solution" to other FT-60 owners. Another suggestion: There seems to be a missing line in the instruction drop down for uploading to the radio. There is no prompt to hit the OK as the final step as there is on the download instruction. You do have to hit the OK button or the download will not start. Great program and great support. Thank you. Jerry

1 0

[chirp_users] Baofeng UV-17 / UV-18
by Gary Halleen 09 Nov '23

09 Nov '23

I see that a dev driver for supporting UV-17/BF-17 series of radios, as well as the UV-18/BF-18 on Miklor. I’ve tried it and it seems to work fine on my UV-18 Pro I Black and on my UV-17 Pro L radios. It doesn’t support uploading a new logo, but everything else I’ve tried seems to be okay. Is there a plan for including this support directly into the Chirp-Next release in the near future? Thanks! Gary K7TRO

1 0

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 08 Nov '23

08 Nov '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: aaa669c9 hg_uv98: Modernize and fix style ce299949 ic2100: Clean up non-byte-clean get/set_raw() 1e2c277d Add test for strict bitwise seeks d892b56e Add warnings for non-byte-clean raw methods 67cc858e Fix deprecated __trunc__ instead of __int__ 63d9a061 Default bitwise's get_raw() to byte-native 3e672bba Add a way to test for compat bytes usage a80b3b85 gtk: Work around wxGTK Ctrl-C bug 203d7395 ft450: Remove another set_memory() setting modification 6b083e22 ft450: Fix IF filter setting breaking UI 2c3460de Update locale for ft450 changes 935507f1 Add FT-450 support to FT450D driver --

1 0

Re: [chirp_users] New chirp-next build
by Markus Scherer 08 Nov '23

08 Nov '23

Am 29.03.23 um 06:06 schrieb Markus Scherer: > > Grms on the kg-uv980p where did you hear read it?? > > > max > > > Am 29.03.23 um 01:35 schrieb Jeff Gallaway: >> Does anyone know how to unlock gmrs transmit on the Wouxun KG-UV980P? >> I read somewhere that it can be done with chirp but wasn't sure how >> it's done. I think there's another way to do it by downloading a file >> on ham files but I'm more familiar with chirp and would rather go >> that route if it's possible. >> >> >> >> >> Thanks, Jeffrey Gallaway >> >> On Mon, Feb 20, 2023, 12:08 AM <max(a)m-u-m.info> wrote: >> >> Good morning, >> >> I read the post and was patient, but the days of the driver for >> the kg-uv980p have come, so my hopes for the 950p are victorious >> again. >> >> Although the devices look the same, they also make the same only >> the firmware should be different, because if you read the 950 >> with the software from the 980, only the texts are completely >> illegible like "YYYÖ--WWcv" I find that on the Keyboard not at all. >> >> So the driver for that 980 would work, only the fine-tuning is >> missing and I'm not enough a programmer to be able to do that. >> >> The only thing I can do is test if its working, or what do you >> need for the fine tuning, logs or.... >> >> >> >> Max >> >> >> Am 19.02.23 um 16:36 schrieb Martin Cooper: >>> From the FAQ: >>> >>> https://chirp.danplanet.com/projects/chirp/wiki/FAQ#How-can-I-get-my-radio-… >>> >>> and then looking at New Model Requests: >>> >>> https://chirp.danplanet.com/projects/chirp/issues?query_id=15 >>> >>> we find: >>> >>> https://chirp.danplanet.com/issues/1489 >>> >>> So please do not open another new model request. >>> >>> Martin. >>> KD6YAM >>> >>> On Sun, Feb 19, 2023 at 7:26 AM John La <JohnLa(a)usa.net> wrote: >>> >>> . . If your model is not currently in the Supported Radios >>> list, it's >>> possible a request hasn't been submitted. >>> Here's the request procedure for CHIRP-next. >>> ________________ >>> >>> The official CHIRP website is: >>> https://chirp.danplanet.com/projects/chirp/wiki/Home >>> >>> Here's the procedure for requesting a new radio... >>> If you would like to open a request, you would need to >>> - Go to the CHIRP website. (link above) >>> - Register to the website (upper right corner) >>> - Select the Issues Tab and verify that the request for the >>> new radio hasn't >>> already been submitted. >>> - If it's not found, select the New Issue tab and submit >>> your request. >>> - Check back periodically to review the status of your request. >>> At that time a volunteer interested in taking on the project >>> will respond to >>> the request. >>> In most cases, a loaner radio is required so the software >>> can be backward >>> engineered and tested. >>> >>> Stay safe and healthy. >>> John K3NXU >>> >>> https://www.Miklor.com <https://www.Miklor.com> >>> https://www.Miklor.com/DMR/ <https://www.Miklor.com/DMR/> >>> https://www.Miklor.com/GMRS/ <https://www.Miklor.com/GMRS/> >>> >>> >>> -----Original Message----- >>> From: chirp_users-bounces(a)intrepid.danplanet.com >>> [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of >>> max(a)m-u-m.info >>> Sent: Sunday, February 19, 2023 9:26 AM >>> To: chirp_users(a)intrepid.danplanet.com >>> Subject: Re: [chirp_users] New chirp-next build >>> >>> Hi everone, >>> >>> >>> i have ask i there are any plans to ad the wouxun kg - >>> uv950p, but got >>> no answer. >>> >>> >>> So i try it again. >>> >>> >>> >>> THX >>> >>> _______________________________________________ >>> chirp_users mailing list >>> chirp_users(a)intrepid.danplanet.com >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to John LaMartina at johnla(a)usa.net >>> To unsubscribe, send an email to >>> chirp_users-unsubscribe(a)intrepid.danplanet.com >>> To report this email as off-topic, please email >>> chirp_users-owner(a)intrepid.danplanet.com >>> Searchable archive: >>> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com >>> >>> _______________________________________________ >>> chirp_users mailing list >>> chirp_users(a)intrepid.danplanet.com >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Martin Cooper at mfncooper(a)gmail.com >>> To unsubscribe, send an email to >>> chirp_users-unsubscribe(a)intrepid.danplanet.com >>> To report this email as off-topic, please email >>> chirp_users-owner(a)intrepid.danplanet.com >>> Searchable archive: >>> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com >>> >>> >>> _______________________________________________ >>> chirp_users mailing list >>> chirp_users(a)intrepid.danplanet.com >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to max202 atmax(a)m-u-m.info >>> To unsubscribe, send an email tochirp_users-unsubscribe(a)intrepid.danplanet.com >>> To report this email as off-topic, please emailchirp_users-owner(a)intrepid.danplanet.com >>> Searchable archive:https://www.mail-archive.com/chirp_users@intrepid.danplanet.com >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Jeff at jeffrey.gallaway(a)gmail.com >> To unsubscribe, send an email to >> chirp_users-unsubscribe(a)intrepid.danplanet.com >> To report this email as off-topic, please email >> chirp_users-owner(a)intrepid.danplanet.com >> Searchable archive: >> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com >> >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to max202 atmax(a)m-u-m.info >> To unsubscribe, send an email tochirp_users-unsubscribe(a)intrepid.danplanet.com >> To report this email as off-topic, please emailchirp_users-owner(a)intrepid.danplanet.com >> Searchable archive:https://www.mail-archive.com/chirp_users@intrepid.danplanet.com

2 3

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 06 Nov '23

06 Nov '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: ad73f0b5 Check mem.extra structure when comparing memories 1ccf0398 Add temporary XFAIL test list 90027b48 Add test to assert mem.extra contents 6301c585 Check for new instances of match_model() 4092a86d Make extra settings frozen in FrozenMemory 6e330ddb tk3140: Fix setting duplex=off 29424a67 fd268: Fix setting mem.extra values f440e393 ftx800: Cache bank model for improved performance 9f40416f Make test_get_set_specials set empty=False c4725149 Improve memory change debug logging 134c3e83 Log the first block received from Yaesu radios --

1 0

[chirp_users] Uninstall Chirp NEXT - linux pipx whl
by Christian 06 Nov '23

06 Nov '23

Greetings All, Successfully installed chirp on linux (Debian 12) using pipx and the most current .whl file. Runs as expected, but I'd like to uninstall completely and change to flatpak for ease of version management. Anyone have instructions on how to uninstall completely? The install instructions do mention uninstalling old versions but provide no detail. 73! KD9ZCM

2 1