October 2023 - Users - lists.chirpmyradio.com

[chirp_users] Stable low cost radio with flat audio
by Chuck Hast 09 Mar '24

09 Mar '24

I am asking this question here as I believe there is a good collection of folks who are familiar with different radios. Of course whatever is recommended I hope it can be programmed with Chirp. I am looking for a handheld radio that can do 12.5khz bw audio that can be used for data. I would hope it would have a flat audio in/out port but if not mods are part of the game. It needs to be frequency stable (I will be using it for data) and 12.5khz channel widths. and of course programmable with Chirp. The radio cost needs to be low, I would like to keep the whole project under $500. I will need two radios 1 for RX and 1 for TX. There will be a controller involved. If need be I will put each radio in a can for isolation. This is for a solar project so that is also part of the reason to try to use a handheld. -- Chuck -- KP4DJT HamHotline # 11259

5 5

[chirp_users] CHIRP Tips: Advanced Editing
by Dan Smith 29 Nov '23

29 Nov '23

Hi all, I posted another "CHIRP Tips" video, this time on advanced editing techniques. This covers a number of tools CHIRP provides for bulk editing, organizing, and arranging memories. https://youtu.be/9UgJjwaXlrY Hopefully there's at least one tip in there you didn't already know about! --Dan

4 6

Re: [chirp_users] New chirp-next build
by Markus Scherer 08 Nov '23

08 Nov '23

Am 29.03.23 um 06:06 schrieb Markus Scherer: > > Grms on the kg-uv980p where did you hear read it?? > > > max > > > Am 29.03.23 um 01:35 schrieb Jeff Gallaway: >> Does anyone know how to unlock gmrs transmit on the Wouxun KG-UV980P? >> I read somewhere that it can be done with chirp but wasn't sure how >> it's done. I think there's another way to do it by downloading a file >> on ham files but I'm more familiar with chirp and would rather go >> that route if it's possible. >> >> >> >> >> Thanks, Jeffrey Gallaway >> >> On Mon, Feb 20, 2023, 12:08 AM <max(a)m-u-m.info> wrote: >> >> Good morning, >> >> I read the post and was patient, but the days of the driver for >> the kg-uv980p have come, so my hopes for the 950p are victorious >> again. >> >> Although the devices look the same, they also make the same only >> the firmware should be different, because if you read the 950 >> with the software from the 980, only the texts are completely >> illegible like "YYYÖ--WWcv" I find that on the Keyboard not at all. >> >> So the driver for that 980 would work, only the fine-tuning is >> missing and I'm not enough a programmer to be able to do that. >> >> The only thing I can do is test if its working, or what do you >> need for the fine tuning, logs or.... >> >> >> >> Max >> >> >> Am 19.02.23 um 16:36 schrieb Martin Cooper: >>> From the FAQ: >>> >>> https://chirp.danplanet.com/projects/chirp/wiki/FAQ#How-can-I-get-my-radio-… >>> >>> and then looking at New Model Requests: >>> >>> https://chirp.danplanet.com/projects/chirp/issues?query_id=15 >>> >>> we find: >>> >>> https://chirp.danplanet.com/issues/1489 >>> >>> So please do not open another new model request. >>> >>> Martin. >>> KD6YAM >>> >>> On Sun, Feb 19, 2023 at 7:26 AM John La <JohnLa(a)usa.net> wrote: >>> >>> . . If your model is not currently in the Supported Radios >>> list, it's >>> possible a request hasn't been submitted. >>> Here's the request procedure for CHIRP-next. >>> ________________ >>> >>> The official CHIRP website is: >>> https://chirp.danplanet.com/projects/chirp/wiki/Home >>> >>> Here's the procedure for requesting a new radio... >>> If you would like to open a request, you would need to >>> - Go to the CHIRP website. (link above) >>> - Register to the website (upper right corner) >>> - Select the Issues Tab and verify that the request for the >>> new radio hasn't >>> already been submitted. >>> - If it's not found, select the New Issue tab and submit >>> your request. >>> - Check back periodically to review the status of your request. >>> At that time a volunteer interested in taking on the project >>> will respond to >>> the request. >>> In most cases, a loaner radio is required so the software >>> can be backward >>> engineered and tested. >>> >>> Stay safe and healthy. >>> John K3NXU >>> >>> https://www.Miklor.com <https://www.Miklor.com> >>> https://www.Miklor.com/DMR/ <https://www.Miklor.com/DMR/> >>> https://www.Miklor.com/GMRS/ <https://www.Miklor.com/GMRS/> >>> >>> >>> -----Original Message----- >>> From: chirp_users-bounces(a)intrepid.danplanet.com >>> [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of >>> max(a)m-u-m.info >>> Sent: Sunday, February 19, 2023 9:26 AM >>> To: chirp_users(a)intrepid.danplanet.com >>> Subject: Re: [chirp_users] New chirp-next build >>> >>> Hi everone, >>> >>> >>> i have ask i there are any plans to ad the wouxun kg - >>> uv950p, but got >>> no answer. >>> >>> >>> So i try it again. >>> >>> >>> >>> THX >>> >>> _______________________________________________ >>> chirp_users mailing list >>> chirp_users(a)intrepid.danplanet.com >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to John LaMartina at johnla(a)usa.net >>> To unsubscribe, send an email to >>> chirp_users-unsubscribe(a)intrepid.danplanet.com >>> To report this email as off-topic, please email >>> chirp_users-owner(a)intrepid.danplanet.com >>> Searchable archive: >>> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com >>> >>> _______________________________________________ >>> chirp_users mailing list >>> chirp_users(a)intrepid.danplanet.com >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to Martin Cooper at mfncooper(a)gmail.com >>> To unsubscribe, send an email to >>> chirp_users-unsubscribe(a)intrepid.danplanet.com >>> To report this email as off-topic, please email >>> chirp_users-owner(a)intrepid.danplanet.com >>> Searchable archive: >>> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com >>> >>> >>> _______________________________________________ >>> chirp_users mailing list >>> chirp_users(a)intrepid.danplanet.com >>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>> This message was sent to max202 atmax(a)m-u-m.info >>> To unsubscribe, send an email tochirp_users-unsubscribe(a)intrepid.danplanet.com >>> To report this email as off-topic, please emailchirp_users-owner(a)intrepid.danplanet.com >>> Searchable archive:https://www.mail-archive.com/chirp_users@intrepid.danplanet.com >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Jeff at jeffrey.gallaway(a)gmail.com >> To unsubscribe, send an email to >> chirp_users-unsubscribe(a)intrepid.danplanet.com >> To report this email as off-topic, please email >> chirp_users-owner(a)intrepid.danplanet.com >> Searchable archive: >> https://www.mail-archive.com/chirp_users@intrepid.danplanet.com >> >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to max202 atmax(a)m-u-m.info >> To unsubscribe, send an email tochirp_users-unsubscribe(a)intrepid.danplanet.com >> To report this email as off-topic, please emailchirp_users-owner(a)intrepid.danplanet.com >> Searchable archive:https://www.mail-archive.com/chirp_users@intrepid.danplanet.com

2 3

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 31 Oct '23

31 Oct '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: 35c8a1c0 add Anysecu UV-K5 to model alias map 33fd3102 ft2800.py: initialize unknown memory objects - fixes #10916 195f56b2 Fix bitwise grammar for bitfield 4e375c9f th9000: Fix program mode negotiation 62ce876e uvk5: Fix invalid return when firmware probe fails 5ef71ddc Remove UV-9R Pro from Model Alias Map 61460218 uvk5.py: add Retevis RA79 - fixes #10828 --

1 0

[chirp_users] New chirp-next build
by donotreply＠chirp.danplanet.com 27 Oct '23

27 Oct '23

Greetings, A new build of CHIRP-next is available. This includes changes made directly to the tree since yesterday and may include additional features, bug fixes, etc. Unless you have a reason not to, we recommend using the latest build of CHIRP-next at all times. You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ A list of changes since the last build are here: e13ae1c0 Add a note about the master mode list 5f14b51a Fix check_commit for added image files 684e0e5d ft8100: Fix split implementation 2e76c84c uv5r.py: address 'dropped byte' issue - related to #10505 --

2 1

[chirp_users] Malicious use of chirp_users email addresses
by Tim Lavoie 26 Oct '23

26 Oct '23

Hello all, long-time lurker here. I have noticed that the list-specific email address that I use here, has been used in attempted logins to my email server. >From the last couple days, these login attempts have been showing up in my dovecot-related logs, from the following IPs: 103.181.14.250 103.251.143.14 111.70.14.8 121.138.183.176 122.151.32.167 122.169.42.241 123.157.4.248 14.85.88.26 157.208.36.100 180.130.175.136 182.70.242.47 182.75.197.174 183.213.25.118 183.62.20.2 190.93.189.227 196.191.212.238 222.110.220.110 27.72.41.155 31.173.28.23 50.58.168.150 60.221.224.220 61.153.208.38 80.21.208.94 84.235.46.149 91.73.247.158 There is little chance of harm done on this system, but if they have mine, they're likely trying the same on other members' hosts as well. Cheers, Tim

4 3

Re: [chirp_users] chirp release email links
by Rich NE1EE 25 Oct '23

25 Oct '23

This sounds as if it should be true, but it is not. I have recently been working with exactly this problem...a link to an http URL //sometimes// is changed to https (not sure why, perhaps a DNS or browser problem), and an error msg is generated because the certificate doesn't match the link. In addition (not to argue, but to wonder), why not have the link be correct? I'm gonna guess it is a single change to a template. Rich NE1EE On 2023-10-25 09:21:-0700, you wrote: >It doesn't really matter. http redirects to the same resource as https. > >73 >Danny, K5CG >HH 550-000-0609 >SKCC 14257 > >----- Original Message ----- >From: "Rich NE1EE" <TheDustyKey(a)imaginarian.org> >To: "chirp users" <chirp_users(a)intrepid.danplanet.com> >Sent: Tuesday, October 24, 2023 6:03:25 PM >Subject: [chirp_users] chirp release email links > >>From an Oct 3 email, I have >You can get it from here: >http://trac.chirp.danplanet.com/chirp_next/ > >*** Note this is http > >*** Now note that it actually resolved to >https://trac.chirp.danplanet.com/chirp_next/ >*** This is https !!! > >Perhaps it would be helpful to have the link the same as the actual target URL?

2 1

[chirp_users] Quansheng UV-K6 scan issue
by Ken Hansen 25 Oct '23

25 Oct '23

Hello, I recently picked up a Quansheng UV-K6 Dual-band HT, and had an issue with scanning memory channels - I just wanted to share my findings here, I've opened a request for Chirp_next to change this. The issue is that manually programmed channels have a field "scanlists" that is set to "1+2", but new channels added thru chirp_next have this field blank, meaning the channel is not included in channel scanning by default. To access the "scanlists" setting, you have to enable "extra" settings under the View menu item in chirp_next. (Inside the radio, the scanlists setting is actually a couple different fields that combine to populate the chirp_next specific "scanlists" setting - there is no "scanlists" setting in the UV-K6 radio.) I had this issue running chirp_next 20231021. Ken, N2VIP

2 2

[chirp_users] chirp release email links
by Rich NE1EE 25 Oct '23

25 Oct '23

>From an Oct 3 email, I have You can get it from here: http://trac.chirp.danplanet.com/chirp_next/ *** Note this is http *** Now note that it actually resolved to https://trac.chirp.danplanet.com/chirp_next/ *** This is https !!! Perhaps it would be helpful to have the link the same as the actual target URL? 73 Rich NE1EE The Dusty Key On the banks of the Piscataqua

2 1

[chirp_users] Chirp will not install
by Gene 22 Oct '23

22 Oct '23

I have downloaded Chirp several times. Try to install with No luck. I have tried different browsers. I have tried rebooting. I have tried in safe mode. I have tried all the tricks I can find on the internet, and nothing works. It's like something or some file is missing. I am at my wits end. The install gets to the screen to verify and agree to the license but nothing appears. No license. It sits there for about 5 seconds then vanishes and nothing more. I am on an HP Laptop using Windows 10. Please help. [62cc90ee-bbbd-4080-a05b-465351b94590]

13 50