June 2021 - Users - lists.chirpmyradio.com

[chirp_users] importing to radio
by Joel Magee 02 Jul '21

02 Jul '21

I have on several occasions tried to program my Baofeng uv5r, and every time I get to the point where I Import info to radio Chirp informs me it is not working Any suggestions??? Joel KO4QFK

8 18

[chirp_users] " Python-future package" on Mac;
by Craig Hayes 30 Jun '21

30 Jun '21

Hello, I’m having trouble with Chirp on my Mac ( 10.13 High Sierra but same problem on Mojave ) and my new Anytone AT-778UV VOX. The radio model is not in the drop down menu. If I launch Chirp from the shell script I get this warning in the terminal; WARNING: python-future package is not available; chirp.drivers.anytone778uv requires it I guess this explains why I don’t see the radio entry in the menu. I tried installing future via pip, everything appeared to work but still no luck. Anybody encounter this problem? Any hints on where to look for a solution? Thanks, Craig

3 3

[chirp_users] Setting offset between Tx & Rx
by Robert Withers (KO4PYS) 28 Jun '21

28 Jun '21

In Chirp, how could I set a Rx frequency of 444.525 and a Tx frequency of 449.525? Kindly, Robert . .. ... ‘...^,^ Sent from Europa iPhone

3 3

[chirp_users] uploading unusable frequencies
by Robert Dixon 28 Jun '21

28 Jun '21

What happens if you try to upload frequencies outside the range of the radio? Both for receive and transmit and for just receive. Bob W8ERD

1 0

[chirp_users] Need help programming PuXing PX-888
by va7cpl 27 Jun '21

27 Jun '21

I have a PX-888 radio, a Chirp supported cable, and a Windows 10 computer.The radio is a PX-888, NOT a PX-888K.I am having trouble programming the radio. When I upload or download, the data gets garbled. Data does send both directions, but with errors.The exact model of my radio is not listed in Chirp, it lists a PX-777, and a PX888K.Please help.

1 0

[chirp_users] Help with new radio
by Thomas Williams 27 Jun '21

27 Jun '21

Hi all, I have an issue with my new UV-5X. (shocking) The firmware version is P51UV01 and CHIRP will not communicate with the radio. My COM port is 3, the radio is a baofeng and the model is UV-5X The CHIRP message is "Rado did not respond" Tried a bunch of baofeng models and got the same response. Downloaded the baofeng software and it reads the radio fine. I can make changes from the keypad of the radio and they show up in the baofeng software when I redownload from the radio. This also works when I use the software to make changes and write the changes to the radio. It appears CHIRP doesn't work with this firmware update. Please correct me if I am wrong, as I am often wrong. This setup is working for me but I prefer CHIRP.

4 3

[chirp_users] Kenwood TH-K20 and Mac
by Jim McGarvie 26 Jun '21

26 Jun '21

The CHIRP website says it supports the TH-K2, so that is what I selected when I attempted to program my TH-K20A with my Mac, but it didn’t work. It would not download the data from the radio. I tried with both RT’s USB-K4Y and the FTDI cable, but no joy. Is there anyway to use CHIRP on a Mac to program the TH-K20A? Thanks. Jim

2 2

[chirp_users] UV9R-plus
by Alan Start 24 Jun '21

24 Jun '21

Not sure I sent this message through the right channel . first time user ,, sorry Hi, Can someone point me to the software that I can use for programing a new Baofeng UV-9R Plus . I cant seem to find the software that ID,s that model . Also is there CPS software that will work. I am familiar with the Anytone 878 software. Thanks for any Help. — Al N3ZJV Al Start alstart(a)udel.edu Home Phone 302-998-4104 Cell 302-229-5485 N3ZJV

4 3

[chirp_users] How do I ensure that I don't TX on a memory slot? Baofeng UV-5RX3
by Geordon Shoshin VanTassle 23 Jun '21

23 Jun '21

I thought I saw something about what column to set earlier when I was looking for something else, but can someone give me a hint as to what I need to set in order to disable TX on a particular memory slot that I want to be listen only (specifically, in this case, the US WX frequencies)? — With greatest regards, Geordon Shōshin 正心 VanTassle

9 13

[chirp_users] New Daily Build
by Build System 18 Jun '21

18 Jun '21

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20210618 A list of the changes included in this build (since the last daily) follows: Changes for Build #652 [Jim Unroe <rock.unroe(a)gmail.com>] [KT8900D] Add MCU version for QYT KT8900D This patch adds an additional MCU version to support the QYT KT8900D dual-band mobile radio. fixes #9139 [Dan Smith <dsmith(a)danplanet.com>] Fix GA510 DTCS codes missing 654 This was causing an off-by-one error in the higher codes. Fixes #9143

1 0