April 2021 - Users - lists.chirpmyradio.com

[chirp_users] UV-82 bricked?
by Michal Smialowski 05 May '21

05 May '21

I have a Baofeng UV-82 that was programmed, I downloaded the codeplug, added a frequency then uploaded the new codeplug to the radio. When I went to turn the radio back on, there was only a faint display visible on the top line. It looks like a series of black rectangles. Doesn't go beyond that, no channel, no frequency, none of the keys respond. I tried taking the battery out and turning it back on... no help. Tried downloading front the radio... nothing. Is the radio bricked or is there something else that I can try ? tnx Mike VE7SML

10 15

[chirp_users] New Daily Build
by Build System 29 Apr '21

29 Apr '21

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20210429 A list of the changes included in this build (since the last daily) follows: Changes for Build #649 [Rick DeWitt <aa0rd(a)yahoo.com>] [icomciv.py] Fix mem.duplex setting when no duplex attribute. #9025

1 0

[chirp_users] New Daily Build
by Build System 28 Apr '21

28 Apr '21

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20210428 A list of the changes included in this build (since the last daily) follows: Changes for Build #648 [Dan Smith <dsmith(a)danplanet.com>] Fix issues in recent ft2900 patch The recent fix for #9013 introduced two style issues and also created a detect conflict between the base 2900 driver and the mod'd one. Since the mod version is new, we can always refuse to match based on file size and rely on metadata for detection. [KC2VON <kc2von(a)zoominternet.net>] Added a device under the Yaesu tree for the FT-2900R/1900R(TXMod). For compatibility with FT-2900R/1900R jumper 3 opened for full band TX. Issue #9013 [Jim Unroe <rock.unroe(a)gmail.com>] [leixen.py] Add rf.valid_dtcs_codes This patch adds "rf.valid_dtcs_codes" to the get_features(self) radio features list so CHIRP is aware of the full list of DTCS codes supported by the radio. related to #8995 [Jim Unroe <rock.unroe(a)gmail.com>] [kyd.py] Add rf.valid_dtcs_codes This patch adds "rf.valid_dtcs_codes" to the get_features(self) radio features list so CHIRP is aware of the full list of DTCS codes supported by the radio. related to #8995 [Jim Unroe <rock.unroe(a)gmail.com>] [GMRS-V1] Add Missing FileID For BTECH GMRS-V1 This patch adds the US32412 fingerprint to the "_fileid" list. fixes #9005 [Jim Unroe <rock.unroe(a)gmail.com>] [retevis_rt23.py] Add rf.valid_dtcs_codes This patch adds "rf.valid_dtcs_codes" to the get_features(self) radio features list so CHIRP is aware of the full list of DTCS codes supported by the radio. related to #8995 [Jim Unroe <rock.unroe(a)gmail.com>] [uv5r.py] Add rf.valid_dtcs_codes This patch adds "rf.valid_dtcs_codes" to the get_features(self) radio features list so CHIRP is aware of the full list of DTCS codes supported by the radio. related to #8995 [Jim Unroe <rock.unroe(a)gmail.com>] [retevis_rt26.py] Add rf.valid_dtcs_codes This patch adds "rf.valid_dtcs_codes" to the get_features(self) radio features list so CHIRP is aware of the full list of DTCS codes supported by the radio. related to #8995 [Jim Unroe <rock.unroe(a)gmail.com>] [retevis_rt22.py] Add rf.valid_dtcs_codes This patch adds "rf.valid_dtcs_codes" to the get_features(self) radio features list so CHIRP is aware of the full list of DTCS codes supported by the radio. related to #8995 [Jim Unroe <rock.unroe(a)gmail.com>] [retevis_rt1.py] Add rf.valid_dtcs_codes This patch adds "rf.valid_dtcs_codes" to the get_features(self) radio features list so CHIRP is aware of the full list of DTCS codes supported by the radio. related to #8995 [Jim Unroe <rock.unroe(a)gmail.com>] [alinco.py] Add rf.valid_dtcs_codes This patch adds "rf.valid_dtcs_codes" to the get_features(self) radio features list so CHIRP is aware of the full list of DTCS codes supported by the radio. related to #8995

1 0

Re: [chirp_users] chirp_users Digest, Vol 148, Issue 18
by steve.owens70＠protonmail.com 27 Apr '21

27 Apr '21

“Command not found” Mint has an app for handling flatpaks but it doesn’t seem to work. Your scroll wheel doesn’t work for you? If you can’t answer a question or don’t want to take the time to do anything other than crap on somebody just move on, Sent from ProtonMail for iOS On Tue, Apr 27, 2021 at 2:00 PM, <chirp_users-request(a)intrepid.danplanet.com> wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > Today's Topics: > > 1. Re: Update a Flatpak? (Joe Pizzi) > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 26 Apr 2021 18:51:06 -0500 > From: Joe Pizzi <pizzi.joe(a)gmail.com> > Subject: Re: [chirp_users] Update a Flatpak? > To: chirp_users(a)intrepid.danplanet.com > Message-ID: <3b2b1e18-9eb2-8eee-93b4-71fffb1713a1(a)gmail.com> > Content-Type: text/plain; charset="utf-8" > > And, Google doesn't work for you? > > A search for "update flatpak application" yields: > > https://www.systutorials.com/docs/linux/man/1-flatpak-update/ > > Joe Pizzi > KI5LST > > On 4/26/2021 12:08 PM, Steve Owens via chirp_users wrote: >> Good afternoon, all. >> >> I have used chirp in the past, but I have a new install of Mint >> Cinnamon 20.1. I have installed the previous version of Chirp, but >> just became aware that a new version is available. >> >> I cannot remember how I got the flatpak to install initially (must >> have been easy) and I cannot see how to update it. The built in >> flatpak manager in mint is not an option when I right click the file >> in my downloads. >> >> Hope I have not muddled my question too much. >> >> 73, >> >> Steve >> >> Sent from ProtonMail for iOS >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to Joe Pizzi at pizzi.joe(a)gmail.com >> To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com >

1 0

[chirp_users] Update a Flatpak?
by steve.owens70＠protonmail.com 26 Apr '21

26 Apr '21

Good afternoon, all. I have used chirp in the past, but I have a new install of Mint Cinnamon 20.1. I have installed the previous version of Chirp, but just became aware that a new version is available. I cannot remember how I got the flatpak to install initially (must have been easy) and I cannot see how to update it. The built in flatpak manager in mint is not an option when I right click the file in my downloads. Hope I have not muddled my question too much. 73, Steve Sent from ProtonMail for iOS

2 1

[chirp_users] Kenwood TK-760G-1 unable to read in Ubuntu 20.04, able to read/write in Windows 10
by Michael Carson 26 Apr '21

26 Apr '21

I have 2 Kenwood TK-760G-1 radios (eBay special, pulls) that are exhibiting the same symptoms. First I tried reading them in Linux - I use this system for programming other, unrelated, radios, so it's my go-to, and it failed. (Details below) It says "Radio Ident Successful", then errors out with "The radio send 28 bytes, we need 258". (Which error I could *swear* I've seen here before and will feel really dumb when someone points me to the already discussed fix.) The radio does go into "PC" mode, per the display. Puzzled, I then obtained a copy of the Kenwood software, KPG-56D v4.22. Installed, plugged in the cable, found the COM port and...it worked like a champ. More puzzled, I grabbed chirp for Windows, installed, and it worked fine. Able to read and write to the radio Tried it again in Ubuntu, no joy. Some details: jounalctl info when I insert the cable: Apr 19 21:57:08 xps13 kernel: usb 1-2: new full-speed USB device number 24 using xhci_hcd Apr 19 21:57:08 xps13 kernel: usb 1-2: New USB device found, idVendor=067b, idProduct=2303, bcdDevice= 3.00 Apr 19 21:57:08 xps13 kernel: usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 Apr 19 21:57:08 xps13 kernel: usb 1-2: Product: USB-Serial Controller Apr 19 21:57:08 xps13 kernel: usb 1-2: Manufacturer: Prolific Technology Inc. Apr 19 21:57:08 xps13 kernel: pl2303 1-2:1.0: pl2303 converter detected Apr 19 21:57:08 xps13 kernel: usb 1-2: pl2303 converter now attached to ttyUSB0 Apr 19 21:57:08 xps13 mtp-probe[263657]: checking bus 1, device 24: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2" Apr 19 21:57:08 xps13 mtp-probe[263657]: bus: 1, device: 24 was not an MTP device Apr 19 21:57:08 xps13 snapd[36670]: hotplug.go:199: hotplug device add event ignored, enable experimental.hotplug Apr 19 21:57:08 xps13 mtp-probe[263670]: checking bus 1, device 24: "/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2" Apr 19 21:57:08 xps13 mtp-probe[263670]: bus: 1, device: 24 was not an MTP device Apr 19 21:57:11 xps13 ModemManager[1008]: <info> Couldn't check support for device '/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2': not supported by any plugin Permissions on ttyUSB0: crw-rw---- 1 root dialout 188, 0 Apr 19 21:58 /dev/ttyUSB0 My groups: 4(adm),20(dialout),21(fax),22(voice),24(cdrom),25(floppy),26(tape),27(sudo),29(audio),30(dip),46(plugdev),112(bluetooth),115(tcpdump),120(lpadmin),122(scanner),123(saned),128(pulse),129(pulse-access),131(lxd),132(sambashare),133(wireshark),134(kismet) Output of a serial sniffer: pnevulator --ascii --timing-print --tty /dev/ttyUSB0 --read 2021-04-19 21:58:07.523807: 06 . Output of a different serial sniffer run (when the cable grabbed ttyUSB1): jpnevulator --ascii --timing-print --tty /dev/ttyUSB1 --read 2021-04-19 21:46:39.400999: 00 . 2021-04-19 21:46:39.560981: 36 30 30 04 FF F1 600... Occasionally, the serial monitor will show something more, like: 2021-04-19 22:42:00.199228: 00 . 2021-04-19 22:42:12.661137: 06 . 2021-04-19 22:42:13.163410: 76 32 2E 30 30 20 FF FF FF FF 15 57 80 75 C1 42 v2.00 .....W.u.B 90 75 C3 03 00 A1 10 B1 32 EC A0 FD A7 FF 03 7D .u......2......} B4 D8 02 FD 8D 34 06 FE 55 73 F4 EE 07 73 F5 F0 .....4..Us...s.. 07 77 44 16 00 77 E5 75 A0 7E B0 0D 6E 21 B6 FB .wD..w.u.~..n!.. 73 F0 EE 07 73 F2 F0 07 77 40 16 00 77 E2 EC A0 s...s...w@..w... FD A7 FF 03 7D B4 D8 02 FD 8D 34 06 FE 20 C6 01 ....}.....4.. .. FB 73 F0 EE 07 73 F2 F0 07 77 40 16 00 77 E2 EC .s...s...w@..w.. A0 FD C3 00 04 7D B4 D8 F2 FD 8D 34 06 FD 76 FF .....}.....4..v. 03 7D F2 E7 01 CC 0A 6E 1B 76 0F FA 08 20 6A 14 .}.....n.v... j. 97 DF FA 08 7D E2 03 00 7D E2 E0 97 FD FB 22 04 ....}...}.....". 7D B4 F3 76 0F F0 08 10 6A 05 9F 02 F0 08 F3 76 }..v....j......v 0F 15 09 10 6A 04 F4 5A 05 75 80 80 00 03 7E B0 ....j..Z.u....~. 01 6E 38 76 0F 15 09 08 6A 17 76 0F E5 08 10 6E .n8v....j.v....n 2A D8 02 FD DF E9 03 74 C2 0B FD EE E2 03 FE 1B *......t........ D8 02 FD 11 FE 03 0C 6E 07 D8 02 FD E1 EA 03 74 .......n.......t C2 0B FD 77 E5 03 97 DF 16 09 76 0F ED 08 02 6E ...w......v....n 2B 76 0F 15 09 08 6A 0E 76 0F 14 09 7F +v....j.v.... If I have the serial monitor running, Chirp instead gives the error "Error reading data from radio", so I don't have much faith that it's actually giving good data. Using the Kenwood Detect driver returns "No response from radio." I *can* program the radio in Windows, so this isn't *urgent* but...I don't want to. I'd like to get this working in Linux and also understand what's going on. Thank you for your time & attention, C.

2 1

[chirp_users] UV-S9 Volume issue
by Jimmy 20 Apr '21

20 Apr '21

Programmed my NEW Baofeng UV-S9 about an hour ago for the first time, upon completion, upload and restart, I noticed I had no volume. I plugged in the provided earpiece to check if it was the radio and I had sound in the earpiece but not on the radio speaker. Please advise. Thanks

2 1

[chirp_users] Q: Baofeng GT-5R (new, 'legal,' model)
by Ken Hansen 18 Apr '21

18 Apr '21

Hello, New to group, searched past 4 months of maillist archives, no obvious discussion about this radio there, so I'm posting here. This new radio is a 'cleaned-up' and TX Freq-limited version of the ever-popular UV-5R - it has as its selling features TX hard-limited to 2m & 70cm US ham bands and claims to have been 'cleaned up' regarding spurious emissions. My issue is, it different from classic UV-5R, so while I can do basic programming I can, for example, set a channel to 'skip' in CHIRP but the GT-5R has no documented skip function, so skip is not transferred to the radio. I also struggle to enter a power-on message, and other minor issues when I pretend it is a UV-5R. Could we create a proper entry for this model? This radio is being targeted for new hams by mfg, and having to jump thru hoops to get it to work with CHIRP is no bueno. I'm happy to test release candidates. Thanks, Ken, N2VIP

2 1

Re: [chirp_users] UV-S9 Issues - image file attached
by bob＠tyroneflats.com 17 Apr '21

17 Apr '21

Let's see if the 3rd time is truly a charm - here's another try at getting the image file to you Jim. Best Bob n0zfv -- This email has been checked for viruses by AVG. https://www.avg.com

2 1

Re: [chirp_users] UV-S9 Issues
by bob＠tyroneflats.com 17 Apr '21

17 Apr '21

I evidently misspoke - it appears I did edit the original files. Attached is the image file I created from the first download, then edited, and a CSV which I just now created via Export. "Radio > Upload to Radio" is available in both files but neither puts the listed freqs into the radio. Microsoft Outlook doesn't seem to like the .img file so I renamed it to .bob. Hopefully you can change it back and have a usable file - please let me know. Thanks Jim -----Original Message----- From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> On Behalf Of Jim Unroe Sent: Friday, April 16, 2021 11:55 AM To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Subject: Re: [chirp_users] UV-S9 Issues On Fri, Apr 16, 2021 at 1:32 PM <bob(a)tyroneflats.com> wrote: > > Pretty safe bet this is all operator error but this thing is eating my lunch! I downloaded and installed the most recent version (20210416) first thing this morning. I tried following the steps in the help documentation – download from radio, export to img file, etc. When I upload the very same image file, with no edits, to the radio it populates both banks with 676.948 Mhz, changes language to Chinese, locks the radio and produces this error: > > “Edit > Properties” in Chirp does nothing. I’ve been able to unlock the keyboard and do a reset then change language back to ENG but everything (even FM broadcast if I reset “All”) is gone. > > > If I open the exported spreadsheet file I get “Unable to Detect Model” every time so I always choose Radioddity UV-5RX3 as directed by several sources. > > > I edited the spreadsheet, adding a few local repeaters (saved with different filename so still have the original) but, when I open that file I get the attached error plus the “Radio > Upload to Radio” menu option is greyed out. > > > And I never have been able to enter any channels in the 1.25 M band even though the aforementioned upload fills a few memories with channels around 300, 400, 500 & 600 Mhz. > > > I got my first HAM license in the 70’s. I was a techy for years > (retired now) so this is as embarrassing as it is frustrating but this > project is running out of fun! I keep thinking of that old help desk > joke where the tech tells the user “You’d better just box that up and > send it back to the factory.” “Oh, is it broken?” asked the client. > “No” replied the tech, “You’re just too #@%! stupid to use it!” (I > feel like that user right now!) > > > Thanks all! > > > Bob > > N0zfv > Do you have the original, unedited, successful download from the radio? Attach it. Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Bob at bob(a)tyroneflats.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com -- This email has been checked for viruses by AVG. https://www.avg.com

4 8