September 2019 - Users - lists.chirpmyradio.com

[chirp_users] Need help
by Daniel Donnelly 18 Sep '19

18 Sep '19

I have a Baofeng UV-82 and I need to download programming data from this radio. I have the correct cable and the radio is fully operational but when I try to read the radio data all I get is garbage. I know CHIRP works so I must be doing something wrong. Can anyone help me? Thanks Dan KC7VDA <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai…> <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>

6 5

[chirp_users] Can't download repeater book in Chirp, I get wrong file type message
by Frank Cervellere 15 Sep '19

15 Sep '19

2 1

[chirp_users] Chirp and IC-T70
by Kenneth Bell 13 Sep '19

13 Sep '19

Hi Chirp says it will work with the IC-T70, but I’m not able to make it work. My symptoms are that I am able to download from the radio without any problem. When I try to send to the radio, it hangs up and does a reset back to factory settings. I have posted a bug, but after a month no one seems to be looking at it. Is there anyone who HAS made Chirp work with IC-T70? Could you tell me the name of the cable you use? Is your IC-T70 an A model or a E model (US OR Europe, I think). What version of Chirp are you using (I’m trying with the latest). Using Mac or PC? Version of Windows? Is there anything special you do to make it work? Thank you in advance. Ken - K4EES

3 2

[chirp_users] 9ssseajoymmkmkmmNJkk7k6kli5seesaareazeemkm6mmmmmmommnkmnkk5
by rpswisher1 09 Sep '19

09 Sep '19

?mlkmkmkmmilkkmimikmhimmnklzsseeSsssaddedsk7Sent from my Sprinsayst Samsung Galaxy S7.

3 2

[chirp_users] HELP!
by Ted Smith 07 Sep '19

07 Sep '19

Hi, You guys probably get this all the time, but now it’s my turn. I have been using CHIRP with my Baofeng radios for the past couple of years with no problem. I recently had to upgrade my Mac OS to 10.11. Now I can’t get CHIRP to talk to my radios. I assume it is because the drivers are wrong or something. I have tried downloading the Prolific drivers. No luck so far. There used to be a pl2303 option on the drop down menu when I was uploading/ downloading. It isn’t there anymore. I’m not sure what to do at this point. Please help, I’m begging. Thanks, -Ted Ted Smith Pikes Peak Paragliding, LLC 2205 Charing Court Colorado Springs, CO 80919 info(a)PikesPeakParaGliding.com 719.761.1486 EIN: 81-4065089

5 9

[chirp_users] Baofeng A58S tri-band
by Nick G4IRX 06 Sep '19

06 Sep '19

Hello Chirp list, Picked up a Baofeng A58S tri-band 144/220/430. There seem to a be a few variations of these tri-banders for sale in UK at present. Using CHIRP daily-20190829 which works with my other Baofeng radios. I am unable to get any of the Baofeng models to read the radio, I either get "Error reading data from radio: not the amount of data we want." or "Error reading data from radio". Are these models new and currently unsupported or is there something else I should be looking at? Thanks, Nick.

2 10

[chirp_users] VX-170 download but no upload
by Michal Smialowski 06 Sep '19

06 Sep '19

I am able to download from the VX-170 but not upload. I take it that the same "clone" mode is used for download and upload. I note that the data for Rx and Tx go through the same pin on the 4 pin yaesu connector. I assume that the Rx and Tx data alternate on the same line because it is shared. Question: When uploading to the radio , does the software need to Tx and Rx to/from the PC to the radio or does it just Tx from PC to radio ? ie is there handshaking involved or just a steady transmit stream from the PC to the radio? tnx Mike VE7SML

2 1

[chirp_users] New Daily Build
by Build System 05 Sep '19

05 Sep '19

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20190905 A list of the changes included in this build (since the last daily) follows: Changes for Build #592 [Rick DeWitt <aa0rd(a)yahoo.com>] [ic2730] Fix for corrupted bank index, fixes issue #7031 Apply a low-order mask in _get_bank module. Issue #7031

1 0

Re: [chirp_users] chirp_users Digest, Vol 129, Issue 4
by whippet＠whippetracing.org 04 Sep '19

04 Sep '19

Thanks Tony, Not having the cable attached was the key. Didn't know that. Thanks. Didn't find that in the instructions. Didn't know that was not legal. Have to use them differently than I had envisioned. Puzzling that the FCC allowed them to be made that way. Gregg Message: 4 Date: Tue, 3 Sep 2019 22:28:47 +0000 From: Tony Fuller <GoldStar611(a)hotmail.com> Subject: Re: [chirp_users] Working get my Baofeng UV5R To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Message-ID: <BN8PR15MB3459102CA6C1F92C9B03E1FAEDB90(a)BN8PR15MB3459.namprd15.prod.outlook. com> Content-Type: text/plain; charset="windows-1252" Legalities aside (those emails will come through soon enough) have you determined if you actually have the right ToneSql selected? Number 5 on the talkabout radio probably does not correspond to the 5th tone in the drop down box. Google is your friend here. Also, FRS is narrow band FM if I recall correctly. Tony Get Outlook for Android<https://aka.ms/ghei36>

2 1

[chirp_users] Problems with PMR446 frequencies
by Ulrich Heidenreich 04 Sep '19

04 Sep '19

At first many thanks for the good work the delevopers have done programming that chirp'y thing. It works fine till today. I just wanted to move a block of PMR446 fequencies, which I have sucessfully entered in my YAESU VX6 and then uploaded it from the radio to chirp. But chirp refuses to cut (that works) and paste (that doesn't work) these frequencies from one to another location: It says, this frequencies requires a 6,25 kHz step which is not supported by the radio. That's correct though, because the step really is 12,5 kHz and supported. But the first channel ist shifted by 6,25 kHz as if there seemes to be a 6,25 kHz frequency grid: 446,00625 MHz 446,01875 MHz 446,03125 MHz … and so on Obviously that plays a trick on chirp, so it won't write such frequencies. Do I have a chance other than program these 16 channels anew at another location in the radio and upload them again? As I'm german and my english isn't quite good, excuse my bad english and answer in simply english too, please. Regards, Ulrich

1 0