February 2018 - Users - lists.chirpmyradio.com

[chirp_users] Freq. list download to radio from chirp freq. web list
by Harold 22 Feb '18

22 Feb '18

What (import to radio) do I choose to download from 0-1000 freq. list on chirp freq. list, that I have chosen for my radio Sent from Mail for Windows 10

3 2

Re: [chirp_users] CHIRP Drivers for Kenwood TH-G71
by Dave B 22 Feb '18

22 Feb '18

Hi. As the TH-G71 is already listed in Chirp. (CHIRP daily-20180210 at least.) You need to use USBview ( http://www.ftdichip.com/Support/Utilities/usbview.zip ) to determine the chipset the cable or radio uses, then go to the chipset companies website, or the radio maker's site, if the chip is built into the radio, and pull the driver setup files for your OS. (It is a genuine Microsoft tool, just that FTDI host a copy, as it's difficult to find on MS's pages, or a genuine version elsewhere. There is a Linux version too, but needs building from source, not difficult, but not exactly a beginner option.) Kenwood (and others) have used SiLabs USB/Serial chips for many products, I don't know for that radio. Check the Kenwood radio website. If you bought or made up a cable, then it's the USB/Serial chip in that you need the OS drivers for. Take care with anything that identifies itself as using a Prolific chip. There are many fakes, that the current officially supported (by Prolific and MS) will not work with. (There are even fake FTDI chips out there!) As in all things these days, Google is your friend. One thing I'm noticing these days across many ham forums, Windows 10 and anything MAC related, is a nightmare. Stick with Windows 7 (or 8/8.1) while you can, or move to Linux (something like Ubuntu or Mint, easier for Windows users to learn, and start with a 32 bit release.) Chirp runs on Linux just fine, and even all the fake USB/Serial chips seem to still work OK. No endorsement, just saying. 73. Dave G0WBX. On 21/02/18 20:00, chirp_users-request(a)intrepid.danplanet.com wrote: > Subject: [chirp_users] CHIRP Drivers for Kenwood TH-G71 > To: "chirp_users(a)intrepid.danplanet.com" > <chirp_users(a)intrepid.danplanet.com> > Message-ID: > <CY4PR12MB1813475A122EA549CF6EF13E9BCF0(a)CY4PR12MB1813.namprd12.prod.outlook.com> > > Content-Type: text/plain; charset="windows-1252" > > Hi, > I need the drivers to connect CHIRP to a Kenwood radio, model TH-G71. Someone knows where I can download these drivers? (I?m using Windows 10). > > Thanks, > > Jos? Maria Barros > PU3-JOB > Brazil -- Created on and sent from a Unix like PC running and using free and open source software:

2 1

[chirp_users] Rig Settings
by Alan Hayes 21 Feb '18

21 Feb '18

I'm not seeing where the program allows to receive/send the radio settings to the rig other than the basics. Is that correct? Thanks 73 , Alan -NE5AH

6 9

[chirp_users] BaoFeng BF-F9V2+
by Harold Witte 20 Feb '18

20 Feb '18

I recently bought this radio, but when I try to program it, there is no listing for this model, tried the #8 model but notice comes up error no radio found Could use some help on this problem.i

3 2

[chirp_users] CHIRP Drivers for Kenwood TH-G71
by José Maria Barros 20 Feb '18

20 Feb '18

Hi, I need the drivers to connect CHIRP to a Kenwood radio, model TH-G71. Someone knows where I can download these drivers? (I’m using Windows 10). Thanks, José Maria Barros PU3-JOB Brazil

3 2

Re: [chirp_users] BaoFeng BF-F9V2+
by Darby Collier 20 Feb '18

20 Feb '18

Sorry, I meant to say "try" looking. I would check for you but I'm not near a pc. On Feb 20, 2018 16:10, "Harold Witte" <jungemeister(a)sbcglobal.net> wrote: I recently bought this radio, but when I try to program it, there is no listing for this model, tried the #8 model but notice comes up error no radio found Could use some help on this problem.i _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to DarbyInGreen at collier.darby(a)gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com

2 1

[chirp_users] CHIRP x Windows 10
by José Maria Barros 20 Feb '18

20 Feb '18

Hi everybody, I am trying to use CHIRP in a computer with W10, but I can´t do it. The CHIRP doesn´t run. Any suggest? Thank you, JB Brazil

4 5

Re: [chirp_users] Yaesu FT-2DR and Mac OS 10.13.3 (High, Sierra) Programming Cable Recommendation
by Dave B 19 Feb '18

19 Feb '18

Under Windows, you can use USBview. http://www.ftdichip.com/Support/Utilities/usbview.zip This is actually a genuine Microsoft tool, but it's almost impossible to find on any MS site. It's too useful not to have! For Linux:- http://www.kroah.com/linux-usb/ Is very good, but you need to build from source. In truth, it's a modified fork of the source for the above Microsoft program. You also need to run it with root privileges, or use sudo from the users command line, or gksu in a desktop launcher. If there is anything similar for Mac's, I have no knowledge. Perhaps the Linux source could be persuaded to build on a Mac? But how useful it would be, I don't know, as Mac's are based on BSD, not Linux, the devil is in the detail etc. 73. Dave G0WBX. ------------------------------------------------------------------------ On 18/02/18 20:00, chirp_users-request(a)intrepid.danplanet.com wrote: > Date: Sat, 17 Feb 2018 19:22:24 -0500 > From: "D.J.J. Ring, Jr." <n1ea(a)arrl.net> > Subject: Re: [chirp_users] Yaesu FT-2DR and Mac OS 10.13.3 (High > Sierra) Programming Cable Recommendation > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > Message-ID: > <CADO5RbiTo78aSwmbiL7fSQv+6XYKGSFVimiwdkDDZyntWJBe7w(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > The cable does not know and does not care which program runs on a computer > it is plugged into. > > The cable you have should work fine IF the cable hardware is supported by > MAC OS. > > In linux there are commands like lsusb and lshw which would tell what USB > devicee are plugged in. > > That is how I found out the type USB cable I had. > > 73 > DR > N1EA

2 1

Re: [chirp_users] chirp_users] Ml3245 programing
by Mark Worley 18 Feb '18

18 Feb '18

Does anyone know of available software for ericsson GE pm45a Jim Unroe <rock.unroe(a)gmail.com> wrote: >On Sat, Feb 17, 2018 at 3:09 PM, jquinn53 <jquinn53(a)eastex.net> wrote: >> >> Does anyone know of anyone that has access to the software that I could >> purchase? > >After a quick google, it appears that P&W may have it. >https://www.pwservice.com/radios/legacy/mobile/legacy_ml3245.aspx > >Jim KC9HI >_______________________________________________ >chirp_users mailing list >chirp_users(a)intrepid.danplanet.com >http://intrepid.danplanet.com/mailman/listinfo/chirp_users >This message was sent to Mark Worley at e050671(a)yahoo.com >To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

2 1

[chirp_users] Ml3245 programing
by jquinn53 18 Feb '18

18 Feb '18

Does anyone know of anyone that has access to the software that I could purchase? Sent via the Samsung Galaxy S® 5 ACTIVE™, an AT&T 4G LTE smartphone

5 4