September 2017 - Users - lists.chirpmyradio.com

[chirp_users] Yaesu FT-7900 change memory content display
by Jerome Whelan 10 Sep '17

10 Sep '17

I have successfully programmed several hundred memory channels on my Yaesu FT-7900 using CHIRP. Each memory channel is displayed as “memory address and LABEL". I want each memory channel to display as “memory address and FREQUENCY" instead. Is it possible to select / control this behavior through CHIRP ? Do I need to edit my file to clear all labels and re-upload? Thanks for anyone’s experience here. Jerry AB3SX

3 2

[chirp_users] BTECH vs Baofeng CHIRP Manufacture field
by Tom Norris 09 Sep '17

09 Sep '17

Thanks Aubrey, you are right. Has to be BTECH not Baofeng. I finally tumbled to that but my forehead was dented and hurting by then. After that change the UV-25X2 showed up. Thanks!

2 1

Re: [chirp_users] chirp_users Digest, Vol 105, Issue 5
by Tom Norris 09 Sep '17

09 Sep '17

Have a new Baofeng UV-25X2. When I open Chirp, check USB Com port, get com 4 but when I go to Radio/Download from Radio - and tab to Model it only lists about 12 models and none of the Series X or UV-25X2. I went to Chirp web site Faq's and tells me to update to latest Daily build (we get 07/14/17), which I have and #2 says go to bottom of download page and get development/daily build BUT I cannot find that spot at all, on any page. Help please! Tom On Wed, Sep 6, 2017 at 1:00 PM, <chirp_users-request(a)intrepid.danplanet.com> wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. Chromebook (Nate Alvin) > 2. Re: Chromebook (Nigel A. Gunn G8IFF/W8IFF) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 5 Sep 2017 15:19:46 -0500 > From: Nate Alvin <mypersonalspamfilternc(a)gmail.com> > Subject: [chirp_users] Chromebook > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > Message-ID: > <CAKzXrneAp34V6haj+HygpiT5eANm2u6Xve9qaxoddD_ > 5LfCO_Q(a)mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Any possibilty this will ever be available for a chromebook (Chrome OS)? > Normally a PC person and run it currently on my old laptop, but just bought > a Chromebook. Thanks >

3 2

Re: [chirp_users] chirp_users Digest, Vol 105, Issue 5
by Aubrey Turner 09 Sep '17

09 Sep '17

If this is the radio I think it is, you should look under the BTech brand rather than Baofeng. The UV-25x2 is listed as a BTech on the Chirp Wiki. On Sep 9, 2017 1:32 PM, "Glenn At Home" <GlennErvin(a)cableone.net> wrote: I am wondering if you could use the BF8-HP. I think this is the mobile radio with 25 watts, and has the same frequency range as the BF8-HP. Glenn ----- Original Message ----- *From:* Tom Norris <tknorris0001(a)gmail.com> *To:* Chirp Users Digest <chirp_users(a)intrepid.danplanet.com> *Sent:* Saturday, September 09, 2017 12:59 PM *Subject:* Re: [chirp_users] chirp_users Digest, Vol 105, Issue 5 Have a new Baofeng UV-25X2. When I open Chirp, check USB Com port, get com 4 but when I go to Radio/Download from Radio - and tab to Model it only lists about 12 models and none of the Series X or UV-25X2. I went to Chirp web site Faq's and tells me to update to latest Daily build (we get 07/14/17), which I have and #2 says go to bottom of download page and get development/daily build BUT I cannot find that spot at all, on any page. Help please! Tom On Wed, Sep 6, 2017 at 1:00 PM, <chirp_users-request(a)intrepid.danplanet.com> wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. Chromebook (Nate Alvin) > 2. Re: Chromebook (Nigel A. Gunn G8IFF/W8IFF) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Tue, 5 Sep 2017 15:19:46 -0500 > From: Nate Alvin <mypersonalspamfilternc(a)gmail.com> > Subject: [chirp_users] Chromebook > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > Message-ID: > <CAKzXrneAp34V6haj+HygpiT5eANm2u6Xve9qaxoddD_5LfCO_Q@mail. > gmail.com> > Content-Type: text/plain; charset="utf-8" > > Any possibilty this will ever be available for a chromebook (Chrome OS)? > Normally a PC person and run it currently on my old laptop, but just bought > a Chromebook. Thanks >

1 0

[chirp_users] Chromebook
by Nate Alvin 05 Sep '17

05 Sep '17

Any possibilty this will ever be available for a chromebook (Chrome OS)? Normally a PC person and run it currently on my old laptop, but just bought a Chromebook. Thanks

2 1

[chirp_users] Error
by Mark Miller 04 Sep '17

04 Sep '17

Hello Chirp, I recently attempted to install the driver for OS X. It installed correctly to the best of my knowledge. I then installed Python Runtime, then Chirp. I can launch Chirp, but when I try to download an image, I receive an error report. I speculate that it is due to the cable driver. The error reads: Radio did not respond. Do you have any suggestions? The installation was on an iMac. Your assistance would be appreciated! Sincerely, Mark Miller KE0MQQ markmiller196633(a)icloud.com. This message contains information that is confidential and may be privileged. Unless you are the addressee (or authorized to receive for the addressee), you may not use, copy or disclose to anyone the message or any information contained in the message. If you have received the message in error, please advise the sender by reply e-mail and delete the message.

9 9

Re: [chirp_users] chirp_users Digest, Vol 105, Issue 2
by Paul Nannery 03 Sep '17

03 Sep '17

OK On Sep 3, 2017 3:00 PM, <chirp_users-request(a)intrepid.danplanet.com> wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. Alinco DJ-X10T (raymond reese) > 2. Re: Alinco DJ-X10T (Michael Cole) > 3. Submitting new requests (John La) > 4. Error (Mark Miller) > 5. Re: Error (Jim Unroe) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 2 Sep 2017 21:50:53 +0000 (UTC) > From: raymond reese <kd7krh(a)yahoo.com> > Subject: [chirp_users] Alinco DJ-X10T > To: <chirp_users(a)intrepid.danplanet.com> > Message-ID: <1024510895.1699286.1504389053072(a)mail.yahoo.com> > Content-Type: text/plain; charset=UTF-8 > > Will CHIRP support the Alinco DJ-X10 Wide Band Receiver some day? > If not, is there another program and cable (DB9 or USB) available for it. > I have Win-98, Win-XP and Win-7 systems for programming that radio. > > > ------------------------------ > > Message: 2 > Date: Sat, 2 Sep 2017 16:47:13 -0600 > From: Michael Cole <mwhcole45(a)gmail.com> > Subject: Re: [chirp_users] Alinco DJ-X10T > To: raymond reese <kd7krh(a)yahoo.com>, Discussion of CHIRP > <chirp_users(a)intrepid.danplanet.com> > Message-ID: > <CAGH5P_gjyinFWGUSnzFQdVYQHRodOh7-AUqau_MP=j4VoDFEKQ(a)mail.gmail. > com> > Content-Type: text/plain; charset="utf-8" > > I would also like to know if chirp support Alinco DJ 500. > > On Sat, Sep 2, 2017 at 3:50 PM, raymond reese via chirp_users < > chirp_users(a)intrepid.danplanet.com> wrote: > > > Will CHIRP support the Alinco DJ-X10 Wide Band Receiver some day? > > If not, is there another program and cable (DB9 or USB) available for it. > > I have Win-98, Win-XP and Win-7 systems for programming that radio. > > _______________________________________________ > > chirp_users mailing list > > chirp_users(a)intrepid.danplanet.com > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > This message was sent to Michael Cole at mwhcole45(a)gmail.com > > To unsubscribe, send an email to chirp_users-unsubscribe@ > > intrepid.danplanet.com > > >

1 0

[chirp_users] Submitting new requests
by John La 02 Sep '17

02 Sep '17

If interested in having a radio model included in CHIRP, a radio needs to be provided to a developer interested in working on the project. The official CHIRP website is: http://chirp.danplanet.com/projects/chirp/wiki/Home Here's the procedure for requesting a new radio... If you would like to open a request, you would need to - Go to the CHIRP website. (link above) - Register to the website (upper right corner) - Select the Issues Tab and verify that the request for the new radio hasn't already been submitted. - If it's not found, select the New Issue tab and submit your request. - Check back periodically to review the status of your request. In most cases, a loaner radio is required so it can be backward engineered. _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Michael Cole at mwhcole45(a)gmail.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com

1 0

[chirp_users] Alinco DJ-X10T
by raymond reese 02 Sep '17

02 Sep '17

Will CHIRP support the Alinco DJ-X10 Wide Band Receiver some day? If not, is there another program and cable (DB9 or USB) available for it. I have Win-98, Win-XP and Win-7 systems for programming that radio.

2 1

[chirp_users] Alinco DJ 500
by Michael Cole 31 Aug '17

31 Aug '17

Does chirp support this radio? I do not see it on the list. Thanks

1 0