June 2017 - Users - lists.chirpmyradio.com

[chirp_users] Serial Cable not Found on Max
by John Laiosa 04 Jul '17

04 Jul '17

I loaded the FTDI driver but Chirp does not see it. When bring up the app all that appears is the "Bluetooth-Incoming-Port" and the app returns n error. I am running 10.12.5. Thanks for the help -- Sent from John's iPhone

5 12

[chirp_users] PL tone 146.3 not available to use
by Kyle Colyer 01 Jul '17

01 Jul '17

Hello. I have a baofeng hp 82 and I used the older software to program it and it works great with our repeater. Then I got a btech 50 and downloaded the chirp software to program it but I cannot get it to work right off our repeater. One of the problems is that the pl tone box only has a drop down box and preset pl tones and ours is 146.3. I can't figure out how to put that tone in the chirp program. I have tried to manually input it into the radio itself and it won't work. I had this problem with the bf82 also before I got the software and programmed it with the computer instead of putting it into the radio. Can anyone help?

8 11

[chirp_users] TK-862G and tone squelch
by Jonathan Peakall 30 Jun '17

30 Jun '17

Hi All, I am using a TK-862G for a repeater link. I can't seem to get the tone squelch to work. I can't set both the tone and tone squelch frequencies at the same time. It does appear to be transmitting a tone but I can't get the tone squelch to work. Thanks! Jonathan

2 1

Re: [chirp_users] PL tone 146.3 not available to use
by John 30 Jun '17

30 Jun '17

I would double check with the management company. 146.3 might work but there's no way to put it in any commercial radio. Commercial (Motorola, Kenwood, Yaesu and others) have no way to program in that tone frequency. Try 146.2 in your 82 and it should work just fine. John - K9IJ On 6/29/2017 11:54 PM, Kyle Colyer wrote: > It is 146.3. It works in by bf 82 that way. Is there a way to put > that tone in chirp? > > Thanks > > On Thu, Jun 29, 2017 at 10:51 PM John <johnr(a)k9ij.net > <mailto:johnr@k9ij.net>> wrote: > > 146.3 is not a standard CTCSS Tone. It's much more likely that the > tone you need is 146.2 . > It's unlikely that your repeater is using a non-standard tone. > > John - K9IJ > > > > On 6/29/2017 11:28 PM, Kyle Colyer wrote: >> Hello. >> >> I have a baofeng hp 82 and I used the older software to program >> it and it works great with our repeater. Then I got a btech 50 >> and downloaded the chirp software to program it but I cannot get >> it to work right off our repeater. One of the problems is that >> the pl tone box only has a drop down box and preset pl tones and >> ours is 146.3. I can't figure out how to put that tone in the >> chirp program. I have tried to manually input it into the radio >> itself and it won't work. I had this problem with the bf82 also >> before I got the software and programmed it with the computer >> instead of putting it into the radio. Can anyone help? >> >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> <mailto:chirp_users@intrepid.danplanet.com> >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent tojohnr(a)k9ij.net <mailto:johnr@k9ij.net> atjohnr(a)k9ij.net <mailto:johnr@k9ij.net> >> To unsubscribe, send an email tochirp_users-unsubscribe(a)intrepid.danplanet.com >> <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> > > -- > John Rice K9IJ > johnr(a)k9ij.net <mailto:johnr@k9ij.net> > Webmaster, Network Admin, Janitor > -- John Rice K9IJ johnr(a)k9ij.net Webmaster, Network Admin, Janitor

2 1

Re: [chirp_users] TYT 9800
by Kyle Colyer 29 Jun '17

29 Jun '17

On Thu, Jun 29, 2017 at 10:24 PM Kyle Colyer <colyer.kyle(a)gmail.com> wrote: > > > On Thu, Jun 29, 2017 at 6:09 PM Glenn At Home <GlennErvin(a)cableone.net> > wrote: > >> Thank you. >> Glenn >> >> ----- Original Message ----- >> *From:* Rich Holtman <rich.holtman(a)gmail.com> >> *To:* Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> >> *Sent:* Thursday, June 29, 2017 7:02 PM >> *Subject:* Re: [chirp_users] TYT 9800 >> >> According to the Wiki, found at the following URL, it is supported. >> >> http://chirp.danplanet.com/projects/chirp/wiki/Home >> >> Best regards, and 73, >> >> Rich, KD9ANU >> >> On Thu, Jun 29, 2017 at 6:42 PM, Glenn At Home <GlennErvin(a)cableone.net> >> wrote: >> >>> Hi, >>> Is the TYT 9800 a Chirp supported radio? >>> Thanks. >>> Glenn >>> >>> Lenny/Glenn/N0YJV >>> “Happiness depends more on the inward disposition of mind than on >>> outward circumstances.” >>> Benjamin Franklin >>> >>> _______________________________________________ >>> chirp_users mailing list >>> chirp_users(a)intrepid.danplanet.com >>> To unsubscribe, send an email to >>> chirp_users-unsubscribe(a)intrepid.danplanet.com >>> >> >> ------------------------------ >> >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> >> This message was sent to Glenn at glennervin(a)cableone.net >> >> >> To unsubscribe, send an email to >> chirp_users-unsubscribe(a)intrepid.danplanet.com >> _______________________________________________ >> chirp_users mailing list >> chirp_users(a)intrepid.danplanet.com >> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >> This message was sent to KRC at colyer.kyle(a)gmail.com >> To unsubscribe, send an email to >> chirp_users-unsubscribe(a)intrepid.danplanet.com > >

1 0

[chirp_users] Help chirp access
by Valerio rui 29 Jun '17

29 Jun '17

Kind chirp, I registered to your site, only that at login always keep getting login error thanks valerio

3 2

[chirp_users] TYT 9800
by Glenn At Home 29 Jun '17

29 Jun '17

Hi, Is the TYT 9800 a Chirp supported radio? Thanks. Glenn Lenny/Glenn/N0YJV "Happiness depends more on the inward disposition of mind than on outward circumstances." Benjamin Franklin

3 3

[chirp_users] Baofeng GT3 Mk2 - Offset display bug ?
by BRIAN OXENHAM 29 Jun '17

29 Jun '17

Using a Baofeng GT3 Mk2 Firmware version BFB297 and programming with latest daily build 20170627. If I manually programme a channel into the GT3 for accessing a repeater using the HT keypad all works as expected and the repeater offsets (entered via menu 26) are retained. If I use CHIRP (treating the handset as a UV5R) and upload the same repeater details to the HT, when I look at the HT via menu 26 again the offset display now only reads 000.000. However, the offsets, whilst not correctly displayed, are actually retained in the guts of the HT as I am still able to access the repeater ! B

2 1

Re: [chirp_users] Valerio rui <rui.valerio@hotmail.it> Help chirp access - chirp_users Digest, Vol 102, Issue 23
by Christopher F. Beesley 29 Jun '17

29 Jun '17

Hello Valerio, my name is Chris. I have exactly the same problem. I looked at the FAQ list, no help there. I sent an email to to the address provided several weeks ago but did not get a reply. My very popular Wouxun isn't listed anyway for some strange reason... I know this is no help with your (our?) problem, but at least you will know that you are not alone. Regards, Chris ________________________________ From: chirp_users-bounces(a)intrepid.danplanet.com <chirp_users-bounces(a)intrepid.danplanet.com> on behalf of chirp_users-request(a)intrepid.danplanet.com <chirp_users-request(a)intrepid.danplanet.com> Sent: 28 June 2017 19:00 To: chirp_users(a)intrepid.danplanet.com Subject: chirp_users Digest, Vol 102, Issue 23 Send chirp_users mailing list submissions to chirp_users(a)intrepid.danplanet.com To subscribe or unsubscribe via the World Wide Web, visit http://intrepid.danplanet.com/mailman/listinfo/chirp_users chirp_users -- Discussion of CHIRP - intrepid.danplanet.com<http://intrepid.danplanet.com/mailman/listinfo/chirp_users> intrepid.danplanet.com This list is for discussion of CHIRP use, issues, and beta releases. At any point, the latest daily build will be available here: http://trac.chirp.danplanet.com ... or, via email, send a message with subject or body 'help' to chirp_users-request(a)intrepid.danplanet.com You can reach the person managing the list at chirp_users-owner(a)intrepid.danplanet.com When replying, please edit your Subject line so it is more specific than "Re: Contents of chirp_users digest..." Today's Topics: 1. Help chirp access (Valerio rui) ---------------------------------------------------------------------- Message: 1 Date: Wed, 28 Jun 2017 16:06:21 +0000 From: Valerio rui <rui.valerio(a)hotmail.it> Subject: [chirp_users] Help chirp access To: "Chirp_users(a)Intrepid.Danplanet.Com" <Chirp_users(a)Intrepid.Danplanet.Com> Message-ID: <HE1P194MB0107304CC0802820CC1E218399DD0(a)HE1P194MB0107.EURP194.PROD.OUTLOOK.COM> Content-Type: text/plain; charset="iso-8859-1" Kind chirp, I registered to your site, only that at login always keep getting login error thanks valerio

2 1

[chirp_users] New Daily Build
by Build System 27 Jun '17

27 Jun '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170627 A list of the changes included in this build (since the last daily) follows: Changes for Build #492 [Windsor Schmidt <windsor.schmidt(a)gmail.com>] [New Model] Add Support for Icom IC-2300H Radio Patch for review; based on existing code for the IC-2200H. #959 Changes for Build #493 Changes for Build #494 Changes for Build #495

1 0