May 2017 - Users - lists.chirpmyradio.com

[chirp_users] Bunch of questions - part two
by Al Jones 16 May '17

16 May '17

I should have noted this in my earlier post – mea culpa When he downloads from the Ubuntu repository he gets Chirp Daily 20160110 – well over a year old. When he downloads the tarball from danplanet using the directions there the first two commands complete, the third gives an error – I’m thinking that he doesn’t have python-serial (and possibly python-libxml2) can some kind soul tell me how to tell him that he needs then and how / where to get them? //al

1 0

[chirp_users] Aviation radio programming
by Stokes Smith 14 May '17

14 May '17

Has anyone used CHIRP to program aviation radios? I recently obtained a Yaesu VXA-200 and would like to use CHIRP as I use it for my Wouxon radio. The Yaesu software is not readily available. Thanks for all y'all do! Chirp is a fantastic program. Stokes

4 4

Re: [chirp_users] chirp_users Digest, Vol 101, Issue 12
by John A Diefenbach 13 May '17

13 May '17

I have two laptops; both DELL. One is W-7, the other: W-10. CHIRP & Baofengs program nicely on the W-7; not the W-10, 'tho I'm not surprised. Thoughts? On Sat, May 13, 2017 at 3:00 PM, <chirp_users-request(a)intrepid.danplanet.com > wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. Re: Alinco DJ-G7 "T" (Fred) > 2. QYT KT 8900 (Richard Whittaker) > 3. QYT KT 8900 (Richard Whittaker) > 4. Re: QYT KT 8900 (Tycen Stafford) > 5. Re: QYT KT 8900 (Larry Lovell) > 6. Re: Yaesu FT-8100R Question (John LaMartina) > 7. Re: QYT KT 8900 (Tycen Stafford) > 8. QYT KT8900 (??? (Kris) Francisco) > 9. Re: QYT KT8900 (Jim Unroe) > 10. Re: QYT KT8900 (Tycen Stafford) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 12 May 2017 11:06:00 -0800 > From: Fred <fredferickson(a)gmail.com> > Subject: Re: [chirp_users] Alinco DJ-G7 "T" > To: chirp_users(a)intrepid.danplanet.com > Message-ID: <20170512110600.7369aeda@hp-a1710n> > Content-Type: text/plain; charset=US-ASCII > > On Fri, 12 May 2017 09:10:56 -0700 > Daniel Curry <dod1450(a)mindspring.com> wrote: > > > I am unable to connect to my Alinco DJ-GT "T" hand held. Alinco > > programming software works with no problem. > > > > I guess that you mean the above to be interpreted as a question and a > request for help in using Chirp. > > I'm no expert and won't attempt to answer but: > > If you wish someone on this list to help you use Chirp to connect to > your radio, it probably would be a good idea to give them a bit more > information. > > What did you try specifically to do? What operating system? What > responses did Chirp give you? Which version of Chirp are you trying to > use? Have you been successful with Chirp before? Etc. > > > ------------------------------ > > Message: 2 > Date: Fri, 12 May 2017 16:39:01 -0700 > From: Richard Whittaker <richard(a)avits.ca> > Subject: [chirp_users] QYT KT 8900 > To: chirp_users(a)intrepid.danplanet.com > Message-ID: <05d3520f-38d9-4daa-a550-121a1aa9659b(a)avits.ca> > Content-Type: text/plain; charset="utf-8" > > Hi all. I bought a KT8900 at the beginning of the year, and my FTDI cable > showed up about a week ago. Eager to get more than 2 channels programmed in > (the programming interface sucks!), I plugged my cable in to the BACK of > the radio like all the sites say, and.... Nothing... Fiddle, fiddle, > fiddle, nothing. Different radio models, the whole works, radio would not > respond.? > > > My model has what the manual calls a data terminal jack on the front. > > > I tried it, the cable fit perfectly, and the radio responded just fine. I > don't know if this is true if all KT8900s, but if yours has a front jack, > it's a good idea to try it. > > > Cheers > > > Richard > > > VA7RHW. > > > > > ?Sent from BlueMail ? >

3 2

[chirp_users] QYT KT8900
by "クリス (Kris) Francisco" 13 May '17

13 May '17

Hi i buy KT8900 last month only my problem this morning is no TRansmit i try to program in chirp and reset all still the same they have recieve only no transmit, any body can help me? Im new in this Radio. Thank you KH0VL Sent from my iPhone

3 2

[chirp_users] Yaesu FT-8100R Question
by Alan 12 May '17

12 May '17

I do not see the Yaesu FT-8100R listed as a supported radio. Will Chirp work with my FT-8100R ? Thank you. Alan AA6DW

2 1

[chirp_users] Alinco DJ-G7 "T"
by Daniel Curry 12 May '17

12 May '17

I am unable to connect to my Alinco DJ-GT "T" hand held. Alinco programming software works with no problem.

2 1

[chirp_users] Programming a BTECH UV-50X2
by Bob DeFranco 12 May '17

12 May '17

I just ordered a BTECH UV-50X2 and was going to download the latest version of ChiRP to program it. Looking at the list of supported radios, however, I see the UV-50X3 and the UV-5001 (the predecessor to the UV-50X2) but not my radio. Which model should I select? I suppose I could just try different ones and see which works, but I worry about bricking the radio. Any advice? Bob DeFranco

5 8

[chirp_users] DJ-G7
by Daniel Curry 11 May '17

11 May '17

I am unable to program my DJ-G7 hand held. I get no response from the radio. But when I start it sees the com port and DJ-G7EG. -- Daniel Curry California American Legion Amateur Radio Area 2 Commission and Chairman. US Air Force Veteran IPV6 Sage Certified PGP: AD5A 96DC 7556 A020 B8E7 0E4D 5D5E 9BA5 C83E 8C92 San Francisco/Silicon Valley AmprNet Co-coordinator [44.4.0.0/16]

1 0

[chirp_users] New Daily Build
by Build System 10 May '17

10 May '17

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20170510 A list of the changes included in this build (since the last daily) follows: Changes for Build #480 [Dan Smith <dsmith(a)danplanet.com>] Add Rugged RH5R-V2 #4803

1 0

[chirp_users] Jingtong JT-5988HP support
by Shon Edwards 09 May '17

09 May '17

I'm patient and I don't need the support myself any more, but this would be a wonderful radio to get CHIRP working with. I know a lot of people would appreciate it very much. I bought the radio from Amazon a couple of months ago. I had the cable and software. I tried everything. Nothing worked. To give you an idea of what is necessary to program this radio correctly, I'll outline the steps below even this may not be directly on topic. I'm hoping to show just how difficult this radio is to program, so hopefully we can get some CHIRP support soon.. It's the only 12/10W (no one is sure which it really is) radio (HT) I know of. Anyway, here's how I stumbled on a way to program it: 1. I searched google until I found: http://prepari.org/?page= 5988HP#review-JT5988HP.html. 2. Get the disc out that comes with the radio or click here: htpps:// amazon.com/jt-5988/JT-5988+High+Mid+Low.rar and get ready to copy a driver from it to your HDD. 3. Install the s/w. (it's better than the Chinese s/w for programming) 4. Watch the video on how to set up a com port: JT-5988HP-com-port-setup_ HTML-video.mp4. 5. Click on setup. 6. Click on communication port. 7. Select an available com port and number one will be deselected, then OK. 8. Put the Chinese disc in your drive that came with the radio. 9. Click on the subdirectory (folder): USB驱动. Then click on the folder labeled CH340. Find the executable file CH341SRE.exe. You can not run it from its current position because of all the Chinese characters in the path. Copy it to your hard drive and then run it. Install the driver. Click on OK. If you want to see that it's there, I'm tired of writing steps, but you get the picture. 73 de Shon K6QT Shon R. Edwards, MA, AG (Czech Republic) Amateur call: K6QT 1039 N 2575 W Layton, UT, 84041-7709 USA Home phone: (801) 444-3445 E-mail: sre.1966(a)gmail.com or Shon Edwards 715 Strawberry Creek Private Rd. Bedford, WY 83112 Cell: (307) 248-2104

1 0