May 2017 - Users - lists.chirpmyradio.com

[chirp_users] Icom ID-880H Compatibility with Chirp
by kd7sjt 31 May '17

31 May '17

Good Morning, I have found through an unbelievable amount of testing with my rigs this weekend, just over 8.5 hours roughly, that CHIRP is NOT compatible with the Icom ID-880H in its current state. I cannot successfully program either one of the ID880H's that I own with this software. I can download from it all day. Uploading, however, error's out every time. I'm not sure if it is a bug in the software or what, but I would sure appreciate any and all input and help. I use Linux Mint 18.1 and CHIRP daily-20170526. If you need me to get more details to you, let me know. I'm more than happy to work together with you to get this issue resolved. I have found this problem to be isolated exclusively to the ID-880H's I own. One is in my shack and the other is in the truck. My Icom IC-91AD, Kenwood TH-F6A and Alinco DR-235MKIII ALL programmed flawlessly using this build of Chirp. Again, I would sure appreciate any and all help on this, as both of these ID-880H's are not cheap radios, and I would really like to get them back on the air as soon as humanly possible. 73, Earl KD7SJT

1 0

[chirp_users] Yaesu System Fusion Group Available
by Mark Thompson 30 May '17

30 May '17

The Yaesu System Fusion Group is available at: https://groups.yahoo.com/neo/groups/YaesuSystemFusion/info

1 0

[chirp_users] BaoFeng BF-F9V2+ issues downloading/uploading to MacBook Pro running 10.12
by Jeff Davis 30 May '17

30 May '17

Hi Folks, I’m running a MacBook Pro using OS 10.12.5. I’ve received three different radios along with USB to BaoFang connection cables. When I open Chrip, the Mac OS systems report shows the USB port and the device so the Mac Sees it. But when I run the Radio/Download from Radio command, I get the Any ideas? I’ve tried all three cables and tried it with this radio as well as two UV-5R’s, same results. Thank you in advance. Jeff Davis KF5HQE

5 4

Re: [chirp_users] BaoFeng BF-F9V2+ issues downloading/uploading to MacBook Pro running 10.12
by kc6iih 29 May '17

29 May '17

Dump the Mac book. I use windows 10 and have no problems. Jock KC6IIH Sent from my Samsung Galaxy Tab®|PRO -------- Original message -------- From: David Dixon <yattonbristol(a)btinternet.com> Date:05/29/2017 10:12 PM (GMT-08:00) To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> Subject: Re: [chirp_users] BaoFeng BF-F9V2+ issues downloading/uploading to MacBook Pro running 10.12 On 30 May 2017, at 03:22, Jeff Davis <kf5hqe.jeff(a)gmail.com> wrote: Hi Folks, I’m running a MacBook Pro using OS 10.12.5. I’ve received three different radios along with USB to BaoFang connection cables. When I open Chrip, the Mac OS systems report shows the USB port and the device so the Mac Sees it. But when I run the Radio/Download from Radio command, I get the <Screen Shot 2017-05-29 at 9.18.23 PM.png> Any ideas? I’ve tried all three cables and tried it with this radio as well as two UV-5R’s, same results. Thank you in advance. Jeff Davis KF5HQE _______________________________________________ chirp_users mailing list chirp_users(a)intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to David at yattonbristol(a)btinternet.com To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com Hello Jeff I am using a Mac mini with Chirp with a few radio one is the UV-5R first thing I plug in the USB cable ( USB -02) and radio setting it to VFO mode volume almost full then click on chirp program after clicking on Radio Button on top menu then Download from radio up comes a box then I set it to as Per Photo hope this helps if you get an error before you get this far I my self would reinstall the software and check the usb cable is plugged in well David G1DCG

1 0

[chirp_users] Icom ICF files
by Chuck Hast 29 May '17

29 May '17

Does anyone know if Chirp will write icf files? If it will then my ID-5100 issue may be solved.

4 8

[chirp_users] CHIRP will not start on my WIN 10 laptop
by Bo Sörensson 29 May '17

29 May '17

I have a laptop with WIN 10. First I loaded the .exe version of the daily CHIRP. When I started the program a small window was opened saying that error reporting was enabled. I closed the window and nothing more happened. I tried to run under Administrator mode, but with the same result. Then I unloaded to CHIRP software and loaded the .zip version instead. Same result. When I start the program the only thing that happens is the window with the text about eroor reporting. What am I doing wrong? Bo bo.sorensson(a)tele2.se

2 1

[chirp_users] Icom ID-880H Programming
by kd7sjt 28 May '17

28 May '17

Greetings, I have been attempting to program my Icom ID-880H with Chirp for 3 days now. I downloaded the original image file that was in the radio that had all of the repeaters that I programmed into the radio 4 years ago when using Windows. I no longer use windows and I am currently using Linux Mint 18.1 with the Daily Build of Chirp (CHIRP daily-20170526). I copied that directly off the "About" Tab. I Exported to a .CSV all of the data, and opened Libre Office Calc to edit the file with all of the new and updated frequencies for my QTH, which is Sacramento California. I then got all of the frequencies updated and saved; imported them back into Chirp and attempted to upload them back into the radio. Everything looks great until the very end when the radio says "Clone ERR" on the screen. I then cycle power and the radio clears itself and there is no data in the radio whatsoever. I did try to find if there are any FAQ's on this with no luck. My radio isn't even mentioned in the FAQ's, hi hi. I did verify that it is on the "Supported" list. I have had great success programming my other rigs with Chirp, its just this one so far that is giving me heartache. Are there any known issues with Chirp and the Icom ID-880H? By the way, the original image file that I downloaded before starting any of this, will go back into the rig with no problem. I have saved that and keep it safely guarded so I have atleast something until I can get the new stuff to go into the rig. Any help would be so much appreciated. Thank you for all the hard work you do. 73, Earl KD7SJT Sacramento, CA

1 0

[chirp_users] Offset not set on 70cm for an IC-7100
by M. George 28 May '17

28 May '17

Hi, I tried to do some research on this question... nothing found so far. I'm using chirp with an IC-7100 I just bought and the interface with chirp is working fine except for the fact that 440mhz / 70cm memories I paste in are not updating in the radio with the right Offset. They are all default ot a 600 hz offset like a 2 meter standard. I thought it might be the default offset for each band in the IC-7100 so I made sure 440 has a 5mhz offset, but still when I paste a frequency set as imported from RFinder (for example) none of the 440 offsets are set on those repeaters. I do notice that the Offset isn't a column when you download the memories from the IC-7100. This implies that you can't specifically set the Offset using chirp? Or maybe when you paste in memories to the IC-7100, the IC-7100 won't set the offset based on the receive frequency setting when the duplex is set to + or -. The duplex setting is getting set. Hopefully this isn't a RTFM or RTF-Chirp-M question! Max NG7M -- M. George

1 0

[chirp_users] MAcBook AIR and CHIRP Problems
by John Kobeck 28 May '17

28 May '17

Very frustrated, been trying to program my Kenwood TMV71 with CHIRP, using a FTDI cable from BlueMax and my new Mac Air. The computer will not download from radio. I installed multiple versions of the FTDI drivers and nothing. Even switched the cable for a new one just in case. I was able to program this radio with the same cable and software last year when I had an older MacBook (which I no longer own) Any ideas? I have a feeling maybe there is a simple step I am missing. I believe with the Kenwood TMV71 you simply plug the cable in the fort and go > On May 27, 2017, at 3:00 PM, chirp_users-request(a)intrepid.danplanet.com wrote: > > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. More Wouxum KG-UV8D (plus) Programming (William Liporace) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 26 May 2017 21:53:49 -0400 > From: William Liporace <wc2l(a)wc2l.com> > Subject: [chirp_users] More Wouxum KG-UV8D (plus) Programming > To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> > Message-ID: <7637d542-9b03-e3ee-566f-04fd3edfda7a(a)wc2l.com> > Content-Type: text/plain; charset=utf-8; format=flowed > > OK, I was even more stumped!! > Building and etc... I tried a couple of Chirp versions... > The UV8D & UV8D plus are DIFFERENT radios. > Took a bit of searching, but there is programming software on the Wouxom > site! > http://wouxun.com/download.aspx?flid=1093 > > Hope this helps someone else!! Would have saved a lot of work!! > Let me know when Chirp Supports the radio... Yea, I will watch.... > > Will WC2L > > -- > William Liporace WC2L > http://www.wc2l.com or http://dxc.wc2l.com > AR-Cluster Node telnet dxc.wc2l.com or 144.93 MHz > wc2l(a)wc2l.com > > > > ------------------------------ > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > To unsubscribe, send an email to chirp_users-unsubscribe(a)intrepid.danplanet.com > > End of chirp_users Digest, Vol 101, Issue 26 > ********************************************

2 1

[chirp_users] Yaesu/Vertex Standard VX-150. Is it supported?
by Matthew Pitts 27 May '17

27 May '17

I have had one of these for a few years, but just found my charger for it and was wondering if the radio was supported by Chirp. I'm sure I'll need to program it at some point. Matthew Pitts N8OHU

1 0