January 2015 - Users - lists.chirpmyradio.com

[chirp_users] Will Chirp work with the Baofeng BF-F9 V2
by chaplainblack＠centurytel.net 11 Jan '15

11 Jan '15

I am wanting to buy a Baofeng Radio and am looking at the new Baofeng BF-F9 V2 Does anyone on the list know if CHIRP will work for this radio Is there anything I would need to do specifically to make it compatable One dealer said it should work but I am not sure if that is true or not. thank you all, Ron in WA KA7MUB

11 20

[chirp_users] New Daily Build
by Build System 11 Jan '15

11 Jan '15

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20140921 A list of the changes included in this build (since the last daily) follows: Changes for Build #299 [Marco Filippi <iz3gme.marco(a)gmail.com>] [ft857] add "tone->" to acceptable cross tone mode fix #1901 [Marco Filippi <iz3gme.marco(a)gmail.com>] [thd8102] specify valid cross tone modes The list of valid cross tone modes is changed in UI and can change again in the future, we have to specify the correct list for each radio side effect of fix for #1901 [Marco Filippi <iz3gme.marco(a)gmail.com>] [bf888] specify valid cross tone modes The list of valid cross tone modes is changed in UI and can change again in the future, we have to specify the correct list for each radio side effect of fix for #1901 [Marco Filippi <iz3gme.marco(a)gmail.com>] [UI] add "tone->" to acceptable cross tone mode needed for #1901 [Jim Unroe <rock.unroe(a)gmail.com>] [UV-B5] 'STE' and 'BEEP' Settings are not Uploaded to Radio Properly This patch fixes the problem with the "STE" and "Beep Prompt" settings. Bug #1917 [Marco Filippi <iz3gme.marco(a)gmail.com>] [ft8x7] check that unused memories marked as non empty have been initialized In an image from a user we found some unused memories marked as non empty that have not been initialized with valid data (they are filled by binary 1s). We don't know how to create such a memory but checking that freq field contains valid data is always safe. fix #1909 [Marco Filippi <iz3gme.marco(a)gmail.com>] [common] code cleanup No functional changes at all: blanks removed In support of #159 [Marco Filippi <iz3gme.marco(a)gmail.com>] [FT8x7] code cleanup No functional changes at all, only some code cleanup to make code look better and pylint happier In support of #159 [Marco Filippi <iz3gme.marco(a)gmail.com>] [ic9x] code cleanup No functional changes at all, only some code cleanup to make code look better and pylint happier In support of #159

9 11

[chirp_users] New Daily Build
by Build System 11 Jan '15

11 Jan '15

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20150111 A list of the changes included in this build (since the last daily) follows: Changes for Build #316 [Dan Smith <dsmith(a)danplanet.com>] Revert: [FT-60] Add Memory Bank Support Implments a basic BankModel for Yaesu FT-60r in support of memory at address 0x69C8. Bug #1945 Bug #675 [Dan Smith <dsmith(a)danplanet.com>] changeset: 2306:1d6fb56e2220 tag: tip user: Patrick Lang <patrick.lang(a)hotmail.com> date: Sun Dec 28 23:53:43 2014 -0800 summary: [TH-D7AG] Fix max memory name length #2141 [Dan Smith <dsmith(a)danplanet.com>] changeset: 2305:ba5a6976cab0 tag: tip user: Patrick Lang <patrick.lang(a)hotmail.com> date: Sun Dec 28 16:09:59 2014 -0800 summary: [TH-D7] Fix list of supported characters #2101 [Dan Smith <dsmith(a)danplanet.com>] changeset: 2304:ac2833aa99bd tag: tip parent: 2283:d3f3ad0c14a1 user: Patrick Lang <patrick.lang(a)hotmail.com> date: Sun Dec 28 14:49:59 2014 -0800 summary: [TM-D710G] Add support for Kenwood TM-D710G, no functional difference from TM-D710A #1287 [James Lee N1DDK <jml(a)jmlzone.com>] [th9800] Add basic support for TYT TH9800 part of #1353 [Jim Unroe <rock.unroe(a)gmail.com>] [UV-5R] Add Service Settings for Squelch Create sturcture to expose settings Add "Service Settings" menu Add VHF and UHF Squelch settings #2165 [K. Arvanitis <kosta(a)alumni.uvic.ca>] [FT-60] Add Memory Bank Support Implments a basic BankModel for Yaesu FT-60r in support of memory at address 0x69C8. Bug #1945 Bug #675 [Jim Unroe <rock.unroe(a)gmail.com>] [VV-898] Add Settings to Leixen VV-898 Module - Part 6 Add the following settings: - FM Enable - FM DW (dual watch) - FM Scan - Keypad MIC related to #2149 [Jim Unroe <rock.unroe(a)gmail.com>] [VV-898] Add Settings to Leixen VV-898 Module - Part 5 Add the following settings: - Key Beep - Reset Enable - Small Font - Alias Enable - TX Stop - DW (dual watch) related to #2149 [Jim Unroe <rock.unroe(a)gmail.com>] [VV-898] Add Settings to Leixen VV-898 Module - Part 4 Add the following settings: - Open Beep - Roger Beep - Key Lock - CT/DCS Busy Lock - Alarm Key - Battery Save related to #2149

1 0

Re: [chirp_users] Special Mode?
by David B. Horvath, CCP 10 Jan '15

10 Jan '15

Thanks. I'm aware of the limitations. I can program the frequency into memory directly into the radio but I'm looking to do that within Chirp. The program attempts to "protect" me. There used to be a method to change the limits by swapping out the control database for the radio but the architecture has changed and that doesn't work any more. I'd really like to be able to disable those checks. - David >On Thu, 8 Jan 2015 20:48:01 -0500, Jim Unroe <rock.unroe(a)gmail.com> wrote: >On Thu, Jan 8, 2015 at 7:17 PM, David B. Horvath, CCP ><dhorvath(a)cobs.com> wrote: > > I'm looking to use the receiver out of those ranges Jim. I can > > manually program those frequencies into the radio but not via Chirp. > > > > - David > >Yes. Sort of. CHIRP will let you alter the band limits of a UV-5R and >variant to a low of 1 MHz and an high of 1000 MHz. The you are able to >key in any STEP compatible frequency within those limits (except you >will have to arrow to frequencies below 100 MHz because you can key in >a leading "zero"). Once you have the frequency in the VFO you can >program it to a memory channel as you would a normal in-band >frequency. > >That being said, even though the UV-5R and variants will display any >STEP compatible frequency between 1-1000 MHz, it won't RX/TX very far >out of the factory specified band limits. My crude tests came up with >these as practical limits. > >VHF range 136-174 MHz expands to 127.8-176.0 MHz >UHF range 400-520 MHz expands to 383.5-524.3 MHz > >YMMV > >Jim KC9HI

1 0

[chirp_users] BAOFENG UV82L
by Bill Bates 09 Jan '15

09 Jan '15

ME BAD. IN A PREVIOUS MAILING I MISTAKENLY NOTED MY BAOFENG MODEL. I WOULD WANT TO ADD PUBLIC SERVICE FREQUENCIES TO THE BAOFENG UV82 THEN MOVE THEM TO A MEMORY CHANNEL, THEN SET THE RIG TO SCAN. CAN ANYONE GET ME BRIEF, CLEAR INSTRUCTIONS TO DO SO PLEASE. BILL BATESN2MVK The New Year lies before you, like a spotless tract of snow.........Be careful how you tread on it for every mark will show

2 1

[chirp_users] frequency to chabnnel
by Bill Bates 09 Jan '15

09 Jan '15

GREETINGS TO ALL.CAN SOMEONE TELL ME IN SIMPLE STEP TERMS HOW TO MOVE A FREQUENCY FROM FREQUENCY MODE TO STORE INTO A CHANNEL OF MY UV8. NO SPLIT OR CCTSS NEEDED.....A SIMPLE PUBLIC BAND FREQUENCY INTO A CHANNEL. ALSO HOW DOES ONE BEGIN THE CHANNEL SCAN PROCESS? The New Year lies before you, like a spotless tract of snow.........Be careful how you tread on it for every mark will show

4 3

Re: [chirp_users] Special Mode?
by David B. Horvath, CCP 09 Jan '15

09 Jan '15

I'm looking to use the receiver out of those ranges Jim. I can manually program those frequencies into the radio but not via Chirp. - David >On Date: Wed, 7 Jan 2015 22:30:22 -0500, Jim Unroe ><rock.unroe(a)gmail.com> wrote: > >David, > >You can program any valid frequencies within the published band limits >of the radio (136.000-174.000 MHz and 400.000-520.000 MHz). Any >programmed memory can be easily set to RX only by setting the Duplex >field to "off" > >Jim KC9HI

3 2

Re: [chirp_users] Who used CHIRP in linux ubuntu mode ?
by D.J.J. Ring, Jr. 08 Jan '15

08 Jan '15

The poster, y_61 says that he bought a new cable from Baofeng through Amazon.it, and the cable works fine in Windows but when used with the Chirp Live CD based on Ubuntu with upgraded CHIRP to DAILY CHIRP (20150102) with GTK 2.24-10 Pyton 2.7.3 PYGTK 2.24.0, connecting the cable results in the Baofeng UV-5R (BFS 297) going into TRANSMIT mode. The poster, y_61 does not understand why the same cable is working with Windows but not with Ubuntu CHIRP Live CD. The poster, y_61 does not confirm that the version of CHIRP used on Windows is the same DAILY CHIRP or other. Does anyone know why the Baofeng UV-5R is going into transmit. The poster, y_61 does not state at which moment the UV-5R goes into transmit. David On Wed, Jan 7, 2015 at 1:52 PM, y_61(a)libero.it <y_61(a)libero.it> wrote: > I read in a MIKLOR web site that there are some False usb profilic cable > or false profilic pl-2303 . > > > > I have this china (clone ? ) cable, buy by *amazon :* > > > > > http://www.amazon.it/gp/product/B007VMA6TK?psc=1&redirect=true&ref_=oh_aui_… > > > > In how mode I say if is this cable is a FTDI, or Proflic or PL-2303 or > a bad clone ???? > > > > My very big problem is that when I used this clone cable buy by amazon > on windows xp > > All ok, I read and write on my baofeng UV-5R > > > > But when I use a live cd with ubuntu and CHIPR (update today !!! ) *version > is now:* > > > > DAILY (20150102) GTK 2.24-10 Pyton 2.7.3 PYGTK 2.24.0 > > > > The problem is that with ubuntu (linux distro ) the cable not work and the > baofeng always go to TX ! > > > > Why it work well on windows xp , but not work with Chirp on ubuntu live > cd distro ???? > > > > Thanks for help. > > > > > > PS the version on my baofeng UV-5R is BFS 297 buy on july 2014. > > > > > > ----Messaggio originale---- > Da: y_61(a)libero.it > Data: 26-dic-2014 10.42 > A: <y_61(a)libero.it> > Ogg: I: Re: [chirp_users] Who used CHIRP in linux ubuntu mode ? > > > > ----Messaggio originale---- > Da: y_61(a)libero.it > Data: 24-dic-2014 10.23 > A: <y_61(a)libero.it> > Ogg: Re: [chirp_users] Who used CHIRP in linux ubuntu mode ? > > > > ----Messaggio originale---- > Da: n1ea(a)arrl.net > Data: 23-dic-2014 14.46 > A: "y_61(a)libero.it"<y_61(a)libero.it> > Ogg: Re: R: Re: R: Re: Re: R: Re: [chirp_users] Who used CHIRP in linux > ubuntu mode ? > > What version of chirp are you using? > > David > On Dec 23, 2014 8:00 AM, "y_61(a)libero.it" <y_61(a)libero.it> wrote: > >> >> yes, after installal chiro on usb boot pen, i updateat the last issue of >> chirp via internet.... >> >> >> an ham-radio say that this TX on cable connection is a known issue.... >> its true ? >> >> the solution ? >> >> help me.,,, best 73 >> >> >> ----Messaggio originale---- >> Da: n1ea(a)arrl.net >> Data: 22-dic-2014 21.04 >> A: "y_61(a)libero.it"<y_61(a)libero.it> >> Ogg: Re: R: Re: Re: R: Re: [chirp_users] Who used CHIRP in linux ubuntu >> mode ? >> >> Are you using the latest daily build? >> >> Tell me what version. Do NOT program with anything except the latest >> raily build. >> >> David >> On Dec 22, 2014 2:07 PM, "y_61(a)libero.it" <y_61(a)libero.it> wrote: >> >>> ok i update, now chirp is ok . >>> >>> >>> >>> *Hi, arrived the new cable and now the uv-5r is programmed !* >>> >>> >>> >>> *The old cable is dead !* >>> >>> >>> >>> *when I use this new cable with windows , all ok it read and program the >>> memories,* >>> >>> *but if I use the CHIRP on boot in Ubuntu, when I connect to the usb >>> port this cable * >>> >>> *the RTX go on TX !!!* >>> >>> >>> >>> *why ? remember that I use it on windows all ok, help me, best 73* >>> >>> >>> >>> >>> >>> ----Messaggio originale---- >>> Da: n1ea(a)arrl.net >>> Data: 11-dic-2014 20.43 >>> A: "y_61(a)libero.it"<y_61(a)libero.it> >>> Ogg: Re: Re: R: Re: [chirp_users] Who used CHIRP in linux ubuntu mode ? >>> >>> Not yet. >>> >>> Upgrade CHIRP to the latest DAILY BUILD - this is important. >>> >>> In terminal do this - each line is a command. >>> >>> sudo apt-add-repository ppa:dansmith/chirp-snapshots >>> sudo apt-get update >>> sudo apt-get install chirp-daily >>> >>> After chirp-daily is installed, run it. >>> >>> ONLY then can you program your radio. If you do not use the daily build >>> you will have problems. >>> >>> >>> To run the program you can type chirp-daily and it will run. >>> >>> David >>> >>> >>> On Thu, Dec 11, 2014 at 2:33 PM, y_61(a)libero.it <y_61(a)libero.it> wrote: >>> >>>> >>>> ok i downlod the iso and create the boot on usb... >>>> >>>> now, i connect the cable to programm into the usb port and ? >>>> >>>> >>>> there is some works to function the cable to chirp or none ? >>>> >>>> >>>> 73 >>>> >>>> >>>> >>>> ----Messaggio originale---- >>>> Da: n1ea(a)arrl.net >>>> Data: 10-dic-2014 20.44 >>>> A: "y_61(a)libero.it"<y_61(a)libero.it> >>>> Ogg: Re: R: Re: [chirp_users] Who used CHIRP in linux ubuntu mode ? >>>> >>>> I have twice sent you the link for the iso. >>>> >>>> Download Unetbootin anr use the iso I sent you twice before. >>>> >>>> Make sure you upgrade to latest daily build of CHIRP if you have >>>> Baofeng radio. >>>> >>>> CHIRP is available for Windows also. >>>> >>>> David >>>> On Dec 10, 2014 2:18 PM, "y_61(a)libero.it" <y_61(a)libero.it> wrote: >>>> >>>>> >>>>> >>>>> >>>>> sorry i am not expert ? please send to me the link to download the >>>>> chirp ISO to usb pen boot ? >>>>> >>>>> >>>>> help me.... 73 >>>>> >>>>> ----Messaggio originale---- >>>>> Da: n1ea(a)arrl.net >>>>> Data: 9-dic-2014 22.19 >>>>> A: "y_61(a)libero.it"<y_61(a)libero.it> >>>>> Ogg: Re: [chirp_users] Who used CHIRP in linux ubuntu mode ? >>>>> >>>>> See this message for iso. IMPORTANT read #2 link about UV5R first. >>>>> >>>>> David >>>>> On Dec 8, 2014 6:10 PM, "David Ranch" <chirp(a)trinnet.net> wrote: >>>>> >>>>>> >>>>>> Try out Andy's HamRadio ISO: >>>>>> >>>>>> http://sourceforge.net/projects/kb1oiq-andysham/ >>>>>> >>>>>> It has Chirp pre-installed but you'll probably want to upgrade it >>>>>> before >>>>>> you run it. After that, just follow the Chirp documentation. Since >>>>>> you're using a UV-5R, see: >>>>>> >>>>>> http://www.miklor.com/COM/UV_CHIRP.php >>>>>> >>>>>> --David >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> On 12/08/2014 02:06 AM, y_61(a)libero.it wrote: >>>>>> > Hi, sorry i have a baofeng UV-5R release BFS 297… ( july 2014 i >>>>>> buy ) >>>>>> > >>>>>> > >>>>>> > >>>>>> > I whant yo create a CHIRP on usb pen boot , I think is work on >>>>>> ubuntu or >>>>>> > linux ? >>>>>> > >>>>>> > PLEASE In how mode I create it ? >>>>>> > >>>>>> > I have the programm unebootin for create with the ISO the boot >>>>>> chirp on the >>>>>> > Usb pen. >>>>>> > >>>>>> > But, where I downoad the CORRECT ISO immage for my baofenf UV-5R >>>>>> > BFS 297 version ? >>>>>> > >>>>>> > I use a comunication cable buy on amazon ( I think is a clone ) in >>>>>> this case >>>>>> > with NO use windows but linux…no driver is request ? >>>>>> > >>>>>> > VERY IMPORTANT , after the boot whith this chirp on usb pen drive >>>>>> in linux, >>>>>> > what I to do to install the driver or start the comunication for >>>>>> the cable to >>>>>> > my pc ??? >>>>>> > >>>>>> > Or I insert the cable in a usb port and is finish ? I oper the >>>>>> chirp program >>>>>> > and select in “radio” and read the data memory ? >>>>>> > >>>>>> > Thanks for help, best 73 >>>>>> > >>>>>> > >>>>>> > _______________________________________________ >>>>>> > chirp_users mailing list >>>>>> > chirp_users(a)intrepid.danplanet.com >>>>>> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>>>>> >>>>>> _______________________________________________ >>>>>> chirp_users mailing list >>>>>> chirp_users(a)intrepid.danplanet.com >>>>>> http://intrepid.danplanet.com/mailman/listinfo/chirp_users >>>>>> >>>>> >>>>> >>>>> >>>> >>>> >>> >>> >>> >> >> > > > > > >

1 0

[chirp_users] Special Mode?
by David B. Horvath, CCP 07 Jan '15

07 Jan '15

I want to be able to program in frequencies that aren't in the normal HAM range. My intent is to monitor those frequencies -- I'm not planning on transmitting. I realize this isn't a good choice but better than carrying multiple radios. I can program these frequencies by hand but the software tries to "protect me from myself". UV-5RB Is that possible? - David At 03:00 PM 1/7/2015, chirp_users-request(a)intrepid.danplanet.com wrote: >Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > >To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users >or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > >You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > >When replying, please edit your Subject line so it is more specific >than "Re: Contents of chirp_users digest..." > > >Today's Topics: > > 1. Support for Icom IC-7100 (Bob Nielsen) > 2. Feidaxin FD-268A (Richard AG5M) > 3. Re: Support for Icom IC-7100 (Tom Hayward) > 4. Re: Yaesu FT-8100? (Tom Hayward) > 5. Re: Unsupported Firmware (Jim Unroe) > 6. Re: Feidaxin FD-268A (Grant Diffey) > > >---------------------------------------------------------------------- > >Message: 1 >Date: Tue, 6 Jan 2015 12:51:03 -0800 >From: Bob Nielsen <n7xy(a)clearwire.net> >Subject: [chirp_users] Support for Icom IC-7100 >To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> >Message-ID: <D2836824-703E-4DD6-AE4A-9094042BA012(a)clearwire.net> >Content-Type: text/plain; charset=us-ascii > >Is Chirp support planned for the Icom IC-7100? > >Bob, N7XY > > > >------------------------------ > >Message: 2 >Date: Tue, 6 Jan 2015 15:04:36 -0800 >From: Richard AG5M <ag5m(a)yahoo.com> >Subject: [chirp_users] Feidaxin FD-268A >To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> >Message-ID: > <1420585476.96613.YahooMailBasic(a)web164004.mail.gq1.yahoo.com> >Content-Type: text/plain; charset=us-ascii > >How can I request CHIRP to develop the programming for the Feidaxin >FD-286A? I saw no place to make such a request on their website. >Or for that matter, does anyone know of software to program this >little Chinese HT. It's actually quite a nice little >thing. Thanks, Richard AG5M > > >------------------------------ > >Message: 3 >Date: Tue, 6 Jan 2015 15:19:32 -0800 >From: Tom Hayward <tom(a)tomh.us> >Subject: Re: [chirp_users] Support for Icom IC-7100 >To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> >Message-ID: > <CAFXO5Z17caPioWOy9x1X705bTZmpP-X3NjcE=9H+3RQGraekxQ(a)mail.gmail.com> >Content-Type: text/plain; charset=UTF-8 > >On Tue, Jan 6, 2015 at 12:51 PM, Bob Nielsen <n7xy(a)clearwire.net> wrote: > > > > Is Chirp support planned for the Icom IC-7100? > > > > Bob, N7XY > >http://chirp.danplanet.com/issues/1003 > >Looks like none of the developers have an IC-7100. > >Tom KD7LXL > > >------------------------------ > >Message: 4 >Date: Tue, 6 Jan 2015 15:30:58 -0800 >From: Tom Hayward <tom(a)tomh.us> >Subject: Re: [chirp_users] Yaesu FT-8100? >To: Discussion of CHIRP <chirp_users(a)intrepid.danplanet.com> >Message-ID: > <CAFXO5Z1hRxXO=jzXV4DkFMOK+DYQ7-RN3qqP6_VdQfWWXKetSg(a)mail.gmail.com> >Content-Type: text/plain; charset=UTF-8 > >On Mon, Jan 5, 2015 at 6:08 PM, Eric Allen <eric(a)hackerengineer.net> wrote: > > Hey folks, > > > > I recently picked up a Yaesu FT-8100, and I'm looking to program it with > > CHIRP. Has anybody else given this bad boy a shot? It looks to be > > programmable, so I'm hoping to adapt the CHIRP support for one of the other > > Yaesu mobiles, but I'm hoping maybe it's actually easier than that. > >Yaesus are generally pretty easy to write support for. They all use >the same clone "protocol" (really just a dump of their memory with no >protocol per se). Start with a similar model and try a Download From >Radio. If it's an exact match, everything will work fine. If not, an >error will be reported. You'll want to save the .img and inspect it >with a hex editor after the failed download. Tweak memsize to make >sure you get the whole thing. > >This type of conversation is more appropriate for the chirp_devel list: >http://intrepid.danplanet.com/mailman/listinfo/chirp_devel > >Tom KD7LXL > > >------------------------------ > >Message: 5 >Date: Tue, 6 Jan 2015 19:22:18 -0500 >From: Jim Unroe <rock.unroe(a)gmail.com> >Subject: Re: [chirp_users] Unsupported Firmware >To: Greg Hicks <grizhicks(a)yahoo.com>, Discussion of CHIRP > <chirp_users(a)intrepid.danplanet.com> >Message-ID: > <CADnO8U5PqKCTBu_RZGC=YypwT5ZNCB6pNHTWQ57uXkFZbuMjXA(a)mail.gmail.com> >Content-Type: text/plain; charset=UTF-8 > >On Tue, Jan 6, 2015 at 7:30 AM, Greg Hicks <grizhicks(a)yahoo.com> wrote: > > Good Morning to All from new guy.... > > > > Greg here in Indianapolis, and brand new to the group & using CHIRP. Just > > received a BaoFeng BF-F8HP yesterday and have been playing with. I was > > amble to download from radio, but not upload. When I try to upload a new > > 'img' file, I get the following error message: > > > > Unsupported firmware version: N5R3401F8HP-1 > > > > Not sure how to look for this, nor where to find. > > > > Thanks, in advance for any help..... Greg > > > > <===><===><===><===><===> > > Greg Hicks, K9TLA > > Hancock County CERT Program Manager > > 317-501-5389 (cell) > > <===><===><===><===><===> > >Greg, > >You currently should not be using the CHIRP stable build for any >Baofeng/Pofung radios because of memory layout changes in the latest >models. Also, the CHIRP stable build does not support the radios with >3 power levels (see the Support Radios list on the CHIRP home page. >Upgrade to the latest CHIRP daily build and you should be OK. > >Jim KC9HI > > >------------------------------ > >Message: 6 >Date: Wed, 7 Jan 2015 12:37:53 +1100 >From: Grant Diffey <gdiffey(a)gmail.com> >Subject: Re: [chirp_users] Feidaxin FD-268A >To: ag5m(a)yahoo.com, Discussion of CHIRP > <chirp_users(a)intrepid.danplanet.com> >Message-ID: > <CACckToX5Ek4W+TjD4d0UGdcSJUutan0d=Wc_fgt_GbQ9e5qFpg(a)mail.gmail.com> >Content-Type: text/plain; charset="utf-8" > >Richard, > >Did you see: > >http://chirp.danplanet.com/projects/chirp/wiki/FAQ#How-can-I-get-my-radio-s… > > > >On Wed, Jan 7, 2015 at 10:04 AM, Richard AG5M <ag5m(a)yahoo.com> wrote: > > > How can I request CHIRP to develop the programming for the Feidaxin > > FD-286A? I saw no place to make such a request on their website. > > Or for that matter, does anyone know of software to program this little > > Chinese HT. It's actually quite a nice little thing. Thanks, Richard AG5M > > _______________________________________________ > > chirp_users mailing list > > chirp_users(a)intrepid.danplanet.com > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > >

2 1

[chirp_users] Yaesu FT-8100?
by Eric Allen 06 Jan '15

06 Jan '15

Hey folks, I recently picked up a Yaesu FT-8100, and I'm looking to program it with CHIRP. Has anybody else given this bad boy a shot? It looks to be programmable, so I'm hoping to adapt the CHIRP support for one of the other Yaesu mobiles, but I'm hoping maybe it's actually easier than that.

5 4