January 2015 - Users - lists.chirpmyradio.com

[chirp_users] Baofeng BF-F8HP
by Rick Osgood 23 Jan '15

23 Jan '15

Is this model supported by Chirp or can I select a different model? Windows 7 finally saw the usb connection and it is now listed as an unknown device? Thanks for the great work! -- Rick Osgood

7 9

[chirp_users] Error with chirp
by Tommy P 23 Jan '15

23 Jan '15

Hi, I had a question, I received an error Radio refused to send block 0x1ec0 when I try to upload, is there something I can do to meditate it, I use the latest version, thank you Sent from Yahoo Mail on Android

2 3

[chirp_users] New Daily Build
by Build System 23 Jan '15

23 Jan '15

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20150123 A list of the changes included in this build (since the last daily) follows: Changes for Build #319 [K. Arvanitis <kosta(a)alumni.uvic.ca>] [FT-60] Adding Support for Settings to Yaesu FT-60 Added support for most of the basic (but not all) settings avail. on the FT-60. Note: some settings map to the memory bank and are therefore not included in this list. Note: the list of settings and categories was taken from the user manual for this radio. Tested against the specific revision model no. FT-60R. Feature #1759 [Jens Jensen <af5mi(a)yahoo.com>] [th9800] add tuning steps per channel #1353 [Jens Jensen <af5mi(a)yahoo.com>] [th9800] add tx inhibit feature per channel #2229 add tx inhibit feature by setting txfreq and offset to 0. Causes RX to be normal, but when duplex=off, no TX and ERROR displayed along with beep. Note: Minor cosmetic side effect is that display indicates negative duplex offset, probably because 0 is always < rxfreq. This may be unavoidable unless we can find an actual channel flag which is designated for tx inhibit. Also added channel field "reverse" to map.

1 0

[chirp_users] Error with chirp
by Tommy P 22 Jan '15

22 Jan '15

Hi, I had a question, I received an error Radio refused to send block 0x1ec0 when I try to upload, is there something I can do to meditate it, I use the latest version, thank you Sent from Yahoo Mail on Android

1 0

[chirp_users] ★ Discussion of CHIRP, Brian Peterson left a message for you
by Brian Peterson 21 Jan '15

21 Jan '15

Brian Peterson left a message for you Its sender and content will be shown only to you and you can delete it at any time. You can instantly reply to it, using the message exchange system. To find out what was written to you, just follow this link: http://us1.blendr.com/brian.peterson.23/in/dnuCRX09mrc/?lang_id=106&g=57-0-… If clicking the links in this message does not work, copy and paste them into the address bar of your browser. This email is a part of delivering a message sent by Brian Peterson on the system. If you received this email by mistake, please just ignore it. After a short time the message will be removed from the system. Have fun! The Blendr Team Blendr is powered by Badoo. You have received this email from Badoo Trading Limited (postal address below). If you do not wish to receive further email communications from Badoo click here to opt out: http://us1.blendr.com/impersonation.phtml?lang_id=106&email=chirp_users%40i…. Badoo Trading Limited is a limited company registered in England and Wales under CRN 7540255 with its registered office at Media Village, 131 - 151 Great Titchfield Street, London, W1W 5BB.

1 0

[chirp_users] Offsets change when downloading to CHIRP
by Michael Sonnenblick 21 Jan '15

21 Jan '15

I have a TYT TH-UV3R. When I download my channels from my radio to CHIRP, CHIRP changes some, but not all, of the offsets. I first enter the frequencies into CHIRP and upload them to my radio. I check my radio and the offsets are correct. Then I download the frequencies back into CHIRP and see that the offsets have changed. If I were to re-upload them to my radio, then the wrong offsets would be uploaded. So anytime I need to add a channel, I need to redo all the changed offsets. As I mentioned, not all offsets are changed, but the ones that do change change whenever I download my channels to CHIRP.

2 3

[chirp_users] transmit inhibit setting?
by Tmmccrann＠aol.com 20 Jan '15

20 Jan '15

I have a GT-3. In reading a post or an article, someone said Chirp can inhibit a channel to make the radio like a scanner. Where is that setting??? mike mccrann, wd0gsy tmmccrann(a)aol.com

3 2

[chirp_users] New Daily Build
by Build System 18 Jan '15

18 Jan '15

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20150118 A list of the changes included in this build (since the last daily) follows: Changes for Build #318 [Jens Jensen <af5mi(a)yahoo.com>] [th9800] initialize memories properly if previously inactive #2187 Memories were not getting initialized if previously unused, causing exceptions This will additionally initialize memory if it was previously marked inactive in the radio. [Jens Jensen <af5mi(a)yahoo.com>] [th9800] fix fm modes not setting #2187 fix fm modes not getting set when changed [Jens Jensen <kd4tjx(a)yahoo.com>] [th9800] fix print error with debug on #2187 fix exception at upload of "not all arguments converted during string formatting" when CHIRP_DEBUG=True [Jens Jensen <kd4tjx(a)yahoo.com>] [th9800] fix fm deviation modes #2187 fix for fm deviation modes, which per: https://groups.yahoo.com/neo/groups/TYT_TH9800/conversations/messages/179 may be wide = +/- 6.5 khz, mid = +/- 3.5 khz, narrow = +/- 2.5khz which may more closely correspond to WFM, FM, NFM [Marco Filippi <iz3gme.marco(a)gmail.com>] [KG-UV8D] Fix tone radio features After adding radio image, automated tests revealed that valid_tmodes was missing "Cross" and valid_cross_modes was not set discovered working on #2143 [Marco Filippi <iz3gme.marco(a)gmail.com>] [KG-UV8D] Fix DTCS support Fix #2143 [Marco Filippi <iz3gme.marco(a)gmail.com>] [KG-UV8D] Fix memory label get/set After adding radio image, automated tests revealed that empty label chars were not handled correctly As a side effect of defining element as u8 we can now see their values in developper browser discovered working on #2143 [Marco Filippi <iz3gme.marco(a)gmail.com>] [KG-UV8D] add image file for auto test will point out #2143 [K. Arvanitis <kosta(a)alumni.uvic.ca>] [PATCH] Improves appearance of tab close button Utilizes the stock gtk icon for the gtk Notebook close button label in place of the previously used letter 'X'. Tested this on both Linux and Windows with success. Bug #2211 [Dan Smith <dsmith(a)danplanet.com>] # User K. Arvanitis <kosta(a)alumni.uvic.ca> # Date 1420442263 28800 # Sun Jan 04 23:17:43 2015 -0800 # Node ID 15c8e53a218702d708f5a018c115965dd2fdbb0c # Parent 9e67e7ba60e0fd2accd89d899735b5040da8032b [FT-60] Fix Memory Bounds and Seek Offsets This adjusts the memory bounds of the Yaesu FT-60 to include all 1000 memory address, in addition the seek offsets were adjusted to align correctly to their appropriate memory addresses. Bug #2209 [K. Arvanitis <kosta(a)alumni.uvic.ca>] [FT-60] Add Memory Bank Support Implments a basic BankModel for Yaesu FT-60r in support of memory at address 0x69C8. Bug #1945 Bug #675

1 0

Re: [chirp_users] chirp_users Digest, Vol 73, Issue 12
by Anthony Capino 16 Jan '15

16 Jan '15

Is there any way to add Chanel to the radio with out ear asking the on on the radio? On Friday, January 16, 2015, <chirp_users-request(a)intrepid.danplanet.com> wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com <javascript:;> > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com <javascript:;> > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com <javascript:;> > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. New Daily Build (Build System) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 16 Jan 2015 00:06:43 -0800 (PST) > From: Build System <donotreply(a)danplanet.com <javascript:;>> > Subject: [chirp_users] New Daily Build > To: chirp_users(a)intrepid.danplanet.com <javascript:;> > Message-ID: > <1590275001.13.1421395603818.JavaMail.jenkins(a)eagle.danplanet.com > <javascript:;>> > Content-Type: text/plain; charset="utf-8" > > Greetings, > > A new daily build of CHIRP is available. This includes changes made > directly to the tree yesterday, and may include additional features, > bug fixes, and/or bugs. If you are interested in trying it, grab it > from the following location: > > http://trac.chirp.danplanet.com/chirp_daily/daily-20150116 > > > A list of the changes included in this build (since the last daily) > follows: > > Changes for Build #317 > [K. Arvanitis <kosta(a)alumni.uvic.ca <javascript:;>>] [PATCH] Slight > improvement to memory editor container > > This change simple encapsulates the memory editor scrolling window in an > hbox to allow for smooth transition beteween the controls. > > Bug #2177 > > [Dan Smith <dsmith(a)danplanet.com <javascript:;>>] Update CHIRP icon from > Kosta Arvanitis > > Related to bug #2201 > > [Marco Filippi <iz3gme.marco(a)gmail.com <javascript:;>>] [FT-1D] Fix clone > message > > Fix #2193 > > [Marco Filippi <iz3gme.marco(a)gmail.com <javascript:;>>] [KG-UV8D] Get/Set > memory power level and NFM/FM was broken > > Fix #2137 > > [Marco Filippi <iz3gme.marco(a)gmail.com <javascript:;>>] [KG-UV8D] Set > empty memory was broken > > Fix #2183 > > [K. Arvanitis <kosta(a)alumni.uvic.ca <javascript:;>>] [PATCH] UI Change to > Settings Edit Window > > This simple change removes the uncessary padding of the treeview; > as well as connecting the "changed" event to the treeview. > > By listening to the gtk event we are able to handle selection changes > of the treeview which supports all input types and not only the left mouse > click. > > Bug #2179 > > [K. Arvanitis <kosta(a)alumni.uvic.ca <javascript:;>>] [BUG] Fix Range > Exclusion Issue with Bank Editor > > Memory Bounds ranges are specified as inclusive of the first as well > as the last; while python 'range' is inclusive of the first and exclusive > of the last. > > As a result the BankEditor was not including the final memory slot within > the devices capable bounds, this fixes the issue and aligns with the > behaviour of the MemoryEditor. > > Bug #2175 > > > > ------------------------------ > > _______________________________________________ > chirp_users mailing list > chirp_users(a)intrepid.danplanet.com <javascript:;> > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > End of chirp_users Digest, Vol 73, Issue 12 > ******************************************* >

2 1

[chirp_users] New Daily Build
by Build System 16 Jan '15

16 Jan '15

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20150116 A list of the changes included in this build (since the last daily) follows: Changes for Build #317 [K. Arvanitis <kosta(a)alumni.uvic.ca>] [PATCH] Slight improvement to memory editor container This change simple encapsulates the memory editor scrolling window in an hbox to allow for smooth transition beteween the controls. Bug #2177 [Dan Smith <dsmith(a)danplanet.com>] Update CHIRP icon from Kosta Arvanitis Related to bug #2201 [Marco Filippi <iz3gme.marco(a)gmail.com>] [FT-1D] Fix clone message Fix #2193 [Marco Filippi <iz3gme.marco(a)gmail.com>] [KG-UV8D] Get/Set memory power level and NFM/FM was broken Fix #2137 [Marco Filippi <iz3gme.marco(a)gmail.com>] [KG-UV8D] Set empty memory was broken Fix #2183 [K. Arvanitis <kosta(a)alumni.uvic.ca>] [PATCH] UI Change to Settings Edit Window This simple change removes the uncessary padding of the treeview; as well as connecting the "changed" event to the treeview. By listening to the gtk event we are able to handle selection changes of the treeview which supports all input types and not only the left mouse click. Bug #2179 [K. Arvanitis <kosta(a)alumni.uvic.ca>] [BUG] Fix Range Exclusion Issue with Bank Editor Memory Bounds ranges are specified as inclusive of the first as well as the last; while python 'range' is inclusive of the first and exclusive of the last. As a result the BankEditor was not including the final memory slot within the devices capable bounds, this fixes the issue and aligns with the behaviour of the MemoryEditor. Bug #2175

1 0