December 2012 - Users - lists.chirpmyradio.com

Re: [chirp_users] Writing to Yaesu Vx8G
by Dan Smith 22 Dec '12

22 Dec '12

> A few days ago, I had a friend come over so we could program his Yaesu > Vx8G and we had a few problems writing back to it … I see that there > are two new updates in the last two days but I do not see if the issue I > had was addressed…. ANYWAY here is what I can determine.. > > Using chirp-daily-20121106-installer.exe, it could read but it would not > write to it. So I installed the last release of > chirp-0.2.3-installer.exe and it worked fine. Did the latest daily > build address the problem that I had with the 20121106 build? No, I haven't made any changes to the VX-8 driver in a long time, and none since the 0.2.3 release. Thus, AFAIK, it working on 0.2.3 and not on any daily since then makes no sense to me. If you are _sure_ about this, please open a bug on the website and attach your debug log from when it fails to write. -- Dan Smith www.danplanet.com KK7DS

2 1

[chirp_users] New Daily Build
by Build System 22 Dec '12

22 Dec '12

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20121222 A list of the changes included in this build (since the last daily) follows: Changes for Build #130 [Dan Smith <dsmith(a)danplanet.com>] [uv5r] Allow backlight timeout values up to 24s Related to #366 [Dan Smith <dsmith(a)danplanet.com>] [uv5r] Make the aux block upload conditional on firmware version This loosens the check for a matching firmware version on upload. Instead of requiring it to be the same for any upload, this makes it not do the aux block upload if the versions don't match. Now, users can still share images between radios, but must do a fresh clone to get the aux block settings uploaded properly. An error is raised after a successful main block upload, but before the aux block to let them know that this happened. Improves on #344

2 1

[chirp_users] (no subject)
by Tom Marett 21 Dec '12

21 Dec '12

Where do I find the Windows 7 driver for the Prolific USB to serial? Tom

2 1

[chirp_users] New Daily Build
by Build System 21 Dec '12

21 Dec '12

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20121221 A list of the changes included in this build (since the last daily) follows: Changes for Build #129 [Dan Smith <dsmith(a)danplanet.com>] [uv5r] Allow backlight setting to be 0-10 for newer radios Note that this may also allow the setting to be forced higher for the older radios (feedback encouraged). Fixes #366 [Dan Smith <dsmith(a)danplanet.com>] Make the upload process report an error to the user This should have been done long ago, but was needed to properly display the firmware incompatibility message to the user in support of the fix for #344. [Dan Smith <dsmith(a)danplanet.com>] [uv5r] Read the auxiliary block before uploading to verify firmware compat Thanks to investigation by Jim Unroe, it looks like the version stored in the aux block is non-volatile and reliable for version detection. This change checks that block against that of the image to make sure that there is an exact match and refuses to upload if not. This could potentially be made more tolerant by allowing the upload, but skipping the aux block for non-firmware matching radios. Addresses #344 [Dan Smith <dsmith(a)danplanet.com>] [uv5r] Fix reference to missing variable in clone error message Fixes #368

3 2

[chirp_users] New Daily Build
by Build System 21 Dec '12

21 Dec '12

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20121220 A list of the changes included in this build (since the last daily) follows: Changes for Build #128 [Dan Smith <dsmith(a)danplanet.com>] Speed up tests by short-circuiting time.sleep() Lots of the modules use sleep delays for timing clone responses and retries. This makes the tests run slowly. Instead, make time.sleep() return immediately. #93 [Dan Smith <dsmith(a)danplanet.com>] [dj175] Add support for Alinco DJ175 Fixes #186 [Dan Smith <dsmith(a)danplanet.com>] [uv5r] Add per-band enable/disable flag setting This is speculative, based on some work done by KC9HI, and may help mitigate the issue with #344. [Dan Smith <dsmith(a)danplanet.com>] [uv5r] Fix settings on newer firmware radios This makes adjustments to the way we fetch the band limits, which changed from the older firmware to the newer firmware. It also is more tolerant of the ANI code being short, which is a known issue in CHIRP. Related to #314

5 7

[chirp_users] UV-100
by Harrison Cooper 17 Dec '12

17 Dec '12

Is there a list of radios CHIRP covers? Specifically the UV-100 This e-mail (and any attachments) is confidential and may be privileged. Any unauthorized use, copying, disclosure or dissemination of this communication is prohibited. If you are not the intended recipient, please notify the sender immediately and delete all copies of the message and its attachments.

2 1

Re: [chirp_users] chirp_users Digest, Vol 48, Issue 13
by Jim Unroe 16 Dec '12

16 Dec '12

"The port appears to be a cable without Echo Loopback" is the correct indication of the programming cable using "FindComPort.exe" Jim KC9HI On Sun, Dec 16, 2012 at 12:28 PM, < chirp_users-request(a)intrepid.danplanet.com> wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. Re: chirp_users Digest, Vol 48, Issue 11 (John LaMartina) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 16 Dec 2012 12:28:07 -0500 > From: "John LaMartina" <JohnLa(a)usa.net> > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 11 > To: "'Discussion of CHIRP'" <chirp_users(a)intrepid.danplanet.com> > Message-ID: <000c01cddbb2$b6fb0c20$24f12460$@net> > Content-Type: text/plain; charset="us-ascii" > > The fact that you have no loop back would indicate no physical connection > to the board. > This would point to a bad cable. > > > > Anyone else have thoughts on this? > > > > John K3NXU > > > > From: chirp_users-bounces(a)intrepid.danplanet.com [mailto: > chirp_users-bounces(a)intrepid.danplanet.com] On Behalf Of Rafael Yerushalmi > Sent: Sunday, December 16, 2012 11:36 AM > To: chirp_users(a)intrepid.danplanet.com > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 11 > > > > Hello again... > > > > I run the sw` for finding the port & got the > > messege :"com3 this port appears to be a cable without echo loopback ". > > what does it main ? > > thanks > > > > On Sun, Dec 16, 2012 at 6:29 PM, < > chirp_users-request(a)intrepid.danplanet.com> wrote: > > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. Re: chirp_users Digest, Vol 48, Issue 10 (Rafael Yerushalmi) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 16 Dec 2012 18:29:05 +0200 > From: Rafael Yerushalmi <rafaely10(a)gmail.com> > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 10 > To: chirp_users(a)intrepid.danplanet.com > Message-ID: > <CALiBrY6mzeR=nWWAPKTaQp4= > VxpNWLToo25V3Uc9Coz3kcz7YA(a)mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > Hello there. > I upload again the driver 3.2.0.0 for the usb port com3 & also > give slight trimming of the cable plug side . > but the same messege. > thanks > > > On Sun, Dec 16, 2012 at 3:46 PM, < > chirp_users-request(a)intrepid.danplanet.com > > wrote: > > > Send chirp_users mailing list submissions to > > chirp_users(a)intrepid.danplanet.com > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > or, via email, send a message with subject or body 'help' to > > chirp_users-request(a)intrepid.danplanet.com > > > > You can reach the person managing the list at > > chirp_users-owner(a)intrepid.danplanet.com > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of chirp_users digest..." > > > > > > Today's Topics: > > > > 1. Re: chirp_users Digest, Vol 48, Issue 8 (John LaMartina) > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Sun, 16 Dec 2012 08:45:53 -0500 > > From: "John LaMartina" <JohnLa(a)usa.net> > > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 8 > > To: "'Discussion of CHIRP'" <chirp_users(a)intrepid.danplanet.com> > > Message-ID: <000f01cddb93$ab59d8c0$020d8a40$@net> > > Content-Type: text/plain; charset="us-ascii" > > > > If the cable is okay. the next step would be the driver. > > > > You mentioned using 3.2.0.0 which is correct for Windows 7. (XP > > automatically runs the correct driver) > > > > > > > > However, if you now plug the cable into a different USB port, Windows > will > > load the NEW driver for that port, not 3.2.0.0 > > > > Below you mention com6 and com3 so it appears you are moving the cable > > from USB to USB. > > > > You will need to return to the original USB port or reload 3.2.0.0 to the > > new one. > > > > > > > > Check out the FAQ section at the bottom of this link. > > > > http://www.miklor.com/uv5r/UV5R-Drivers.html > > > > > > > > Let us know if this helps. > > > > John K3NXU > > > > > > > > > > > > From: chirp_users-bounces(a)intrepid.danplanet.com [mailto: > > chirp_users-bounces(a)intrepid.danplanet.com] On Behalf Of Rafael > Yerushalmi > > Sent: Sunday, December 16, 2012 1:04 AM > > To: chirp_users(a)intrepid.danplanet.com > > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 8 > > > > > > > > Good morning ... > > > > > > > > 1- On the xp when its works (before the virus )the cable was ok, so the > > > > cable issue is ok( i think ). > > > > 2- I opend a two different com ( com3/com6 ) but the same result. > > > > > > > > Thanks > > > > > > > > On Sat, Dec 15, 2012 at 9:10 PM, < > > chirp_users-request(a)intrepid.danplanet.com> wrote: > > > > Send chirp_users mailing list submissions to > > chirp_users(a)intrepid.danplanet.com > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > or, via email, send a message with subject or body 'help' to > > chirp_users-request(a)intrepid.danplanet.com > > > > You can reach the person managing the list at > > chirp_users-owner(a)intrepid.danplanet.com > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of chirp_users digest..." > > > > > > Today's Topics: > > > > 1. Re: chirp_users Digest, Vol 48, Issue 6 (John LaMartina) > > 2. Re: chirp_users Digest, Vol 48, Issue 6 (william coulson) > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Sat, 15 Dec 2012 11:44:16 -0500 > > From: "John LaMartina" <JohnLa(a)usa.net> > > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 6 > > To: "'Discussion of CHIRP'" <chirp_users(a)intrepid.danplanet.com> > > Message-ID: <000601cddae3$6c632280$45296780$@net> > > Content-Type: text/plain; charset="us-ascii" > > > > The error message indicates that your cable is not plugged in all the > way. > > A common problem as Baofeng doesn't manufacture their own cables. > > See: http://www.miklor.com/uv5r/UV5R-ErrorMess.html > > > > If you haven't already, check out the UV5R User's Guide > > http://www.miklor.com/uv5r/UserGuide > > > > Enjoy your new Toy... > > John K3NXU > > > > > > From: chirp_users-bounces(a)intrepid.danplanet.com [mailto: > > chirp_users-bounces(a)intrepid.danplanet.com] On Behalf Of Rafael > Yerushalmi > > Sent: Saturday, December 15, 2012 10:38 AM > > To: chirp_users(a)intrepid.danplanet.com > > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 6 > > > > Hello there. > > > > I have a UV5R BFB251 . i put the latest chrip & the usb driver 3.2.0.0 > > on win 7 becuse my computer have been with a virus but notning working > with > > the UV5R .i can see the com 3 ok & the driver 3.2.0.0 ok no yellow sigh . > > when I operate chirp after a few seconds the message is " Radio did not > > respond " > > on xp it was working good ... > > what is the setting for the com is it 1200 baud ? is it xon/xoff ? > > > > Need your help > > > > best 73 > > Thanks > > > >

1 0

Re: [chirp_users] chirp_users Digest, Vol 48, Issue 16
by Rafael Yerushalmi 16 Dec '12

16 Dec '12

so, what to do ? what is the problem ? On Sun, Dec 16, 2012 at 10:29 PM, < chirp_users-request(a)intrepid.danplanet.com> wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. Re: chirp_users Digest, Vol 48, Issue 14 (John LaMartina) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 16 Dec 2012 15:28:58 -0500 > From: "John LaMartina" <JohnLa(a)usa.net> > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 14 > To: "'Discussion of CHIRP'" <chirp_users(a)intrepid.danplanet.com> > Message-ID: <001b01cddbcb$fabdf710$f039e530$@net> > Content-Type: text/plain; charset="us-ascii" > > if you are running window 7, 3.2.0.0. is the correct driver. > > > > John K3NXU > > > > From: chirp_users-bounces(a)intrepid.danplanet.com [mailto: > chirp_users-bounces(a)intrepid.danplanet.com] On Behalf Of Rafael Yerushalmi > Sent: Sunday, December 16, 2012 2:30 PM > To: chirp_users(a)intrepid.danplanet.com > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 14 > > > > how to check if it`s an older driver ? > > it written : 3.2.0.0 date: 31.7.2007 > > do you know the port setting maybe this is the problem ? > > > > thanks > > > > On Sun, Dec 16, 2012 at 7:39 PM, < > chirp_users-request(a)intrepid.danplanet.com> wrote: > > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. Re: chirp_users Digest, Vol 48, Issue 11 (George Hale Jr.) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 16 Dec 2012 10:39:10 -0700 > From: "George Hale Jr." <ghalejr(a)gmail.com> > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 11 > To: JohnLa(a)usa.net, Discussion of CHIRP > <chirp_users(a)intrepid.danplanet.com> > Message-ID: > <CAJfKeYD1N399DWFZnqDhf_1VxqYt722AtkrTKPzaPW= > 6gi7CMQ(a)mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > I got that message, when windows loaded the newer driver. Check to be sure > you have the older driver working. > > On Sun, Dec 16, 2012 at 10:28 AM, John LaMartina <JohnLa(a)usa.net> wrote: > > > The fact that you have no loop back would indicate no physical connection > > to the board. > > This would point to a bad cable.**** > > > > ** ** > > > > Anyone else have thoughts on this?**** > > > > ** ** > > > > John K3NXU**** > > > > ** ** > > > > *From:* chirp_users-bounces(a)intrepid.danplanet.com [mailto: > > chirp_users-bounces(a)intrepid.danplanet.com] *On Behalf Of *Rafael > > Yerushalmi > > *Sent:* Sunday, December 16, 2012 11:36 AM > > *To:* chirp_users(a)intrepid.danplanet.com > > *Subject:* Re: [chirp_users] chirp_users Digest, Vol 48, Issue 11**** > > > > ** ** > > > > Hello again...**** > > > > ** ** > > > > I run the sw` for finding the port & got the**** > > > > messege :"com3 this port appears to be a cable without echo loopback > ".** > > ** > > > > what does it main ?**** > > > > thanks**** > > > > ** ** > > > > On Sun, Dec 16, 2012 at 6:29 PM, < > > chirp_users-request(a)intrepid.danplanet.com> wrote:**** > > > > Send chirp_users mailing list submissions to > > chirp_users(a)intrepid.danplanet.com > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > or, via email, send a message with subject or body 'help' to > > chirp_users-request(a)intrepid.danplanet.com > > > > You can reach the person managing the list at > > chirp_users-owner(a)intrepid.danplanet.com > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of chirp_users digest..." > > > > > > Today's Topics: > > > > 1. Re: chirp_users Digest, Vol 48, Issue 10 (Rafael Yerushalmi) > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Sun, 16 Dec 2012 18:29:05 +0200 > > From: Rafael Yerushalmi <rafaely10(a)gmail.com> > > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 10 > > To: chirp_users(a)intrepid.danplanet.com > > Message-ID: > > <CALiBrY6mzeR=nWWAPKTaQp4= > > VxpNWLToo25V3Uc9Coz3kcz7YA(a)mail.gmail.com> > > Content-Type: text/plain; charset="iso-8859-1" > > > > Hello there. > > I upload again the driver 3.2.0.0 for the usb port com3 & also > > give slight trimming of the cable plug side . > > but the same messege. > > thanks > > > > > > On Sun, Dec 16, 2012 at 3:46 PM, < > > chirp_users-request(a)intrepid.danplanet.com > > > wrote: > > > > > Send chirp_users mailing list submissions to > > > chirp_users(a)intrepid.danplanet.com > > > > > > To subscribe or unsubscribe via the World Wide Web, visit > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > or, via email, send a message with subject or body 'help' to > > > chirp_users-request(a)intrepid.danplanet.com > > > > > > You can reach the person managing the list at > > > chirp_users-owner(a)intrepid.danplanet.com > > > > > > When replying, please edit your Subject line so it is more specific > > > than "Re: Contents of chirp_users digest..." > > > > > > > > > Today's Topics: > > > > > > 1. Re: chirp_users Digest, Vol 48, Issue 8 (John LaMartina) > > > > > > > > > ---------------------------------------------------------------------- > > > > > > Message: 1 > > > Date: Sun, 16 Dec 2012 08:45:53 -0500 > > > From: "John LaMartina" <JohnLa(a)usa.net> > > > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 8 > > > To: "'Discussion of CHIRP'" <chirp_users(a)intrepid.danplanet.com> > > > Message-ID: <000f01cddb93$ab59d8c0$020d8a40$@net> > > > Content-Type: text/plain; charset="us-ascii" > > > > > > If the cable is okay. the next step would be the driver. > > > > > > You mentioned using 3.2.0.0 which is correct for Windows 7. (XP > > > automatically runs the correct driver) > > > > > > > > > > > > However, if you now plug the cable into a different USB port, Windows > > will > > > load the NEW driver for that port, not 3.2.0.0 > > > > > > Below you mention com6 and com3 so it appears you are moving the cable > > > from USB to USB. > > > > > > You will need to return to the original USB port or reload 3.2.0.0 to > the > > > new one. > > > > > > > > > > > > Check out the FAQ section at the bottom of this link. > > > > > > http://www.miklor.com/uv5r/UV5R-Drivers.html > > > > > > > > > > > > Let us know if this helps. > > > > > > John K3NXU > > > > > > > > > > > > > > > > > > From: chirp_users-bounces(a)intrepid.danplanet.com [mailto: > > > chirp_users-bounces(a)intrepid.danplanet.com] On Behalf Of Rafael > > Yerushalmi > > > Sent: Sunday, December 16, 2012 1:04 AM > > > To: chirp_users(a)intrepid.danplanet.com > > > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 8 > > > > > > > > > > > > Good morning ... > > > > > > > > > > > > 1- On the xp when its works (before the virus )the cable was ok, so the > > > > > > cable issue is ok( i think ). > > > > > > 2- I opend a two different com ( com3/com6 ) but the same result. > > > > > > > > > > > > Thanks > > > > > > > > > > > > On Sat, Dec 15, 2012 at 9:10 PM, < > > > chirp_users-request(a)intrepid.danplanet.com> wrote: > > > > > > Send chirp_users mailing list submissions to > > > chirp_users(a)intrepid.danplanet.com > > > > > > To subscribe or unsubscribe via the World Wide Web, visit > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > or, via email, send a message with subject or body 'help' to > > > chirp_users-request(a)intrepid.danplanet.com > > > > > > You can reach the person managing the list at > > > chirp_users-owner(a)intrepid.danplanet.com > > > > > > When replying, please edit your Subject line so it is more specific > > > than "Re: Contents of chirp_users digest..." > > > > > > > > > Today's Topics: > > > > > > 1. Re: chirp_users Digest, Vol 48, Issue 6 (John LaMartina) > > > 2. Re: chirp_users Digest, Vol 48, Issue 6 (william coulson) > > > > > > > > > ---------------------------------------------------------------------- > > > > > > Message: 1 > > > Date: Sat, 15 Dec 2012 11:44:16 -0500 > > > From: "John LaMartina" <JohnLa(a)usa.net> > > > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 6 > > > To: "'Discussion of CHIRP'" <chirp_users(a)intrepid.danplanet.com> > > > Message-ID: <000601cddae3$6c632280$45296780$@net> > > > Content-Type: text/plain; charset="us-ascii" > > > > > > The error message indicates that your cable is not plugged in all the > > way. > > > A common problem as Baofeng doesn't manufacture their own cables. > > > See: http://www.miklor.com/uv5r/UV5R-ErrorMess.html > > > > > > If you haven't already, check out the UV5R User's Guide > > > http://www.miklor.com/uv5r/UserGuide > > > > > > Enjoy your new Toy... > > > John K3NXU > > > > > > > > > From: chirp_users-bounces(a)intrepid.danplanet.com [mailto: > > > chirp_users-bounces(a)intrepid.danplanet.com] On Behalf Of Rafael > > Yerushalmi > > > Sent: Saturday, December 15, 2012 10:38 AM > > > To: chirp_users(a)intrepid.danplanet.com > > > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 6 > > > > > > Hello there. > > > > > > I have a UV5R BFB251 . i put the latest chrip & the usb driver 3.2.0.0 > > > on win 7 becuse my computer have been with a virus but notning working > > with > > > the UV5R .i can see the com 3 ok & the driver 3.2.0.0 ok no yellow > sigh . > > > when I operate chirp after a few seconds the message is " Radio did not > > > respond " > > > on xp it was working good ... > > > what is the setting for the com is it 1200 baud ? is it xon/xoff ? > > > > > > Need your help > > > > > > best 73 > > > Thanks > > > > > >

2 1

Re: [chirp_users] chirp_users Digest, Vol 48, Issue 14
by Rafael Yerushalmi 16 Dec '12

16 Dec '12

how to check if it`s an older driver ? it written : 3.2.0.0 date: 31.7.2007 do you know the port setting maybe this is the problem ? thanks On Sun, Dec 16, 2012 at 7:39 PM, <chirp_users-request(a)intrepid.danplanet.com > wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. Re: chirp_users Digest, Vol 48, Issue 11 (George Hale Jr.) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 16 Dec 2012 10:39:10 -0700 > From: "George Hale Jr." <ghalejr(a)gmail.com> > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 11 > To: JohnLa(a)usa.net, Discussion of CHIRP > <chirp_users(a)intrepid.danplanet.com> > Message-ID: > <CAJfKeYD1N399DWFZnqDhf_1VxqYt722AtkrTKPzaPW= > 6gi7CMQ(a)mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > I got that message, when windows loaded the newer driver. Check to be sure > you have the older driver working. > > On Sun, Dec 16, 2012 at 10:28 AM, John LaMartina <JohnLa(a)usa.net> wrote: > > > The fact that you have no loop back would indicate no physical connection > > to the board. > > This would point to a bad cable.**** > > > > ** ** > > > > Anyone else have thoughts on this?**** > > > > ** ** > > > > John K3NXU**** > > > > ** ** > > > > *From:* chirp_users-bounces(a)intrepid.danplanet.com [mailto: > > chirp_users-bounces(a)intrepid.danplanet.com] *On Behalf Of *Rafael > > Yerushalmi > > *Sent:* Sunday, December 16, 2012 11:36 AM > > *To:* chirp_users(a)intrepid.danplanet.com > > *Subject:* Re: [chirp_users] chirp_users Digest, Vol 48, Issue 11**** > > > > ** ** > > > > Hello again...**** > > > > ** ** > > > > I run the sw` for finding the port & got the**** > > > > messege :"com3 this port appears to be a cable without echo loopback > ".** > > ** > > > > what does it main ?**** > > > > thanks**** > > > > ** ** > > > > On Sun, Dec 16, 2012 at 6:29 PM, < > > chirp_users-request(a)intrepid.danplanet.com> wrote:**** > > > > Send chirp_users mailing list submissions to > > chirp_users(a)intrepid.danplanet.com > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > or, via email, send a message with subject or body 'help' to > > chirp_users-request(a)intrepid.danplanet.com > > > > You can reach the person managing the list at > > chirp_users-owner(a)intrepid.danplanet.com > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of chirp_users digest..." > > > > > > Today's Topics: > > > > 1. Re: chirp_users Digest, Vol 48, Issue 10 (Rafael Yerushalmi) > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Sun, 16 Dec 2012 18:29:05 +0200 > > From: Rafael Yerushalmi <rafaely10(a)gmail.com> > > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 10 > > To: chirp_users(a)intrepid.danplanet.com > > Message-ID: > > <CALiBrY6mzeR=nWWAPKTaQp4= > > VxpNWLToo25V3Uc9Coz3kcz7YA(a)mail.gmail.com> > > Content-Type: text/plain; charset="iso-8859-1" > > > > Hello there. > > I upload again the driver 3.2.0.0 for the usb port com3 & also > > give slight trimming of the cable plug side . > > but the same messege. > > thanks > > > > > > On Sun, Dec 16, 2012 at 3:46 PM, < > > chirp_users-request(a)intrepid.danplanet.com > > > wrote: > > > > > Send chirp_users mailing list submissions to > > > chirp_users(a)intrepid.danplanet.com > > > > > > To subscribe or unsubscribe via the World Wide Web, visit > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > or, via email, send a message with subject or body 'help' to > > > chirp_users-request(a)intrepid.danplanet.com > > > > > > You can reach the person managing the list at > > > chirp_users-owner(a)intrepid.danplanet.com > > > > > > When replying, please edit your Subject line so it is more specific > > > than "Re: Contents of chirp_users digest..." > > > > > > > > > Today's Topics: > > > > > > 1. Re: chirp_users Digest, Vol 48, Issue 8 (John LaMartina) > > > > > > > > > ---------------------------------------------------------------------- > > > > > > Message: 1 > > > Date: Sun, 16 Dec 2012 08:45:53 -0500 > > > From: "John LaMartina" <JohnLa(a)usa.net> > > > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 8 > > > To: "'Discussion of CHIRP'" <chirp_users(a)intrepid.danplanet.com> > > > Message-ID: <000f01cddb93$ab59d8c0$020d8a40$@net> > > > Content-Type: text/plain; charset="us-ascii" > > > > > > If the cable is okay. the next step would be the driver. > > > > > > You mentioned using 3.2.0.0 which is correct for Windows 7. (XP > > > automatically runs the correct driver) > > > > > > > > > > > > However, if you now plug the cable into a different USB port, Windows > > will > > > load the NEW driver for that port, not 3.2.0.0 > > > > > > Below you mention com6 and com3 so it appears you are moving the cable > > > from USB to USB. > > > > > > You will need to return to the original USB port or reload 3.2.0.0 to > the > > > new one. > > > > > > > > > > > > Check out the FAQ section at the bottom of this link. > > > > > > http://www.miklor.com/uv5r/UV5R-Drivers.html > > > > > > > > > > > > Let us know if this helps. > > > > > > John K3NXU > > > > > > > > > > > > > > > > > > From: chirp_users-bounces(a)intrepid.danplanet.com [mailto: > > > chirp_users-bounces(a)intrepid.danplanet.com] On Behalf Of Rafael > > Yerushalmi > > > Sent: Sunday, December 16, 2012 1:04 AM > > > To: chirp_users(a)intrepid.danplanet.com > > > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 8 > > > > > > > > > > > > Good morning ... > > > > > > > > > > > > 1- On the xp when its works (before the virus )the cable was ok, so the > > > > > > cable issue is ok( i think ). > > > > > > 2- I opend a two different com ( com3/com6 ) but the same result. > > > > > > > > > > > > Thanks > > > > > > > > > > > > On Sat, Dec 15, 2012 at 9:10 PM, < > > > chirp_users-request(a)intrepid.danplanet.com> wrote: > > > > > > Send chirp_users mailing list submissions to > > > chirp_users(a)intrepid.danplanet.com > > > > > > To subscribe or unsubscribe via the World Wide Web, visit > > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > > or, via email, send a message with subject or body 'help' to > > > chirp_users-request(a)intrepid.danplanet.com > > > > > > You can reach the person managing the list at > > > chirp_users-owner(a)intrepid.danplanet.com > > > > > > When replying, please edit your Subject line so it is more specific > > > than "Re: Contents of chirp_users digest..." > > > > > > > > > Today's Topics: > > > > > > 1. Re: chirp_users Digest, Vol 48, Issue 6 (John LaMartina) > > > 2. Re: chirp_users Digest, Vol 48, Issue 6 (william coulson) > > > > > > > > > ---------------------------------------------------------------------- > > > > > > Message: 1 > > > Date: Sat, 15 Dec 2012 11:44:16 -0500 > > > From: "John LaMartina" <JohnLa(a)usa.net> > > > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 6 > > > To: "'Discussion of CHIRP'" <chirp_users(a)intrepid.danplanet.com> > > > Message-ID: <000601cddae3$6c632280$45296780$@net> > > > Content-Type: text/plain; charset="us-ascii" > > > > > > The error message indicates that your cable is not plugged in all the > > way. > > > A common problem as Baofeng doesn't manufacture their own cables. > > > See: http://www.miklor.com/uv5r/UV5R-ErrorMess.html > > > > > > If you haven't already, check out the UV5R User's Guide > > > http://www.miklor.com/uv5r/UserGuide > > > > > > Enjoy your new Toy... > > > John K3NXU > > > > > > > > > From: chirp_users-bounces(a)intrepid.danplanet.com [mailto: > > > chirp_users-bounces(a)intrepid.danplanet.com] On Behalf Of Rafael > > Yerushalmi > > > Sent: Saturday, December 15, 2012 10:38 AM > > > To: chirp_users(a)intrepid.danplanet.com > > > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 6 > > > > > > Hello there. > > > > > > I have a UV5R BFB251 . i put the latest chrip & the usb driver 3.2.0.0 > > > on win 7 becuse my computer have been with a virus but notning working > > with > > > the UV5R .i can see the com 3 ok & the driver 3.2.0.0 ok no yellow > sigh . > > > when I operate chirp after a few seconds the message is " Radio did not > > > respond " > > > on xp it was working good ... > > > what is the setting for the com is it 1200 baud ? is it xon/xoff ? > > > > > > Need your help > > > > > > best 73 > > > Thanks > > > > > >

2 1

Re: [chirp_users] chirp_users Digest, Vol 48, Issue 11
by Rafael Yerushalmi 16 Dec '12

16 Dec '12

Hello again... I run the sw` for finding the port & got the messege :"com3 this port appears to be a cable without echo loopback ". what does it main ? thanks On Sun, Dec 16, 2012 at 6:29 PM, <chirp_users-request(a)intrepid.danplanet.com > wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. Re: chirp_users Digest, Vol 48, Issue 10 (Rafael Yerushalmi) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 16 Dec 2012 18:29:05 +0200 > From: Rafael Yerushalmi <rafaely10(a)gmail.com> > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 10 > To: chirp_users(a)intrepid.danplanet.com > Message-ID: > <CALiBrY6mzeR=nWWAPKTaQp4= > VxpNWLToo25V3Uc9Coz3kcz7YA(a)mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > Hello there. > I upload again the driver 3.2.0.0 for the usb port com3 & also > give slight trimming of the cable plug side . > but the same messege. > thanks > > > On Sun, Dec 16, 2012 at 3:46 PM, < > chirp_users-request(a)intrepid.danplanet.com > > wrote: > > > Send chirp_users mailing list submissions to > > chirp_users(a)intrepid.danplanet.com > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > or, via email, send a message with subject or body 'help' to > > chirp_users-request(a)intrepid.danplanet.com > > > > You can reach the person managing the list at > > chirp_users-owner(a)intrepid.danplanet.com > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of chirp_users digest..." > > > > > > Today's Topics: > > > > 1. Re: chirp_users Digest, Vol 48, Issue 8 (John LaMartina) > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Sun, 16 Dec 2012 08:45:53 -0500 > > From: "John LaMartina" <JohnLa(a)usa.net> > > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 8 > > To: "'Discussion of CHIRP'" <chirp_users(a)intrepid.danplanet.com> > > Message-ID: <000f01cddb93$ab59d8c0$020d8a40$@net> > > Content-Type: text/plain; charset="us-ascii" > > > > If the cable is okay. the next step would be the driver. > > > > You mentioned using 3.2.0.0 which is correct for Windows 7. (XP > > automatically runs the correct driver) > > > > > > > > However, if you now plug the cable into a different USB port, Windows > will > > load the NEW driver for that port, not 3.2.0.0 > > > > Below you mention com6 and com3 so it appears you are moving the cable > > from USB to USB. > > > > You will need to return to the original USB port or reload 3.2.0.0 to the > > new one. > > > > > > > > Check out the FAQ section at the bottom of this link. > > > > http://www.miklor.com/uv5r/UV5R-Drivers.html > > > > > > > > Let us know if this helps. > > > > John K3NXU > > > > > > > > > > > > From: chirp_users-bounces(a)intrepid.danplanet.com [mailto: > > chirp_users-bounces(a)intrepid.danplanet.com] On Behalf Of Rafael > Yerushalmi > > Sent: Sunday, December 16, 2012 1:04 AM > > To: chirp_users(a)intrepid.danplanet.com > > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 8 > > > > > > > > Good morning ... > > > > > > > > 1- On the xp when its works (before the virus )the cable was ok, so the > > > > cable issue is ok( i think ). > > > > 2- I opend a two different com ( com3/com6 ) but the same result. > > > > > > > > Thanks > > > > > > > > On Sat, Dec 15, 2012 at 9:10 PM, < > > chirp_users-request(a)intrepid.danplanet.com> wrote: > > > > Send chirp_users mailing list submissions to > > chirp_users(a)intrepid.danplanet.com > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > > or, via email, send a message with subject or body 'help' to > > chirp_users-request(a)intrepid.danplanet.com > > > > You can reach the person managing the list at > > chirp_users-owner(a)intrepid.danplanet.com > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of chirp_users digest..." > > > > > > Today's Topics: > > > > 1. Re: chirp_users Digest, Vol 48, Issue 6 (John LaMartina) > > 2. Re: chirp_users Digest, Vol 48, Issue 6 (william coulson) > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Sat, 15 Dec 2012 11:44:16 -0500 > > From: "John LaMartina" <JohnLa(a)usa.net> > > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 6 > > To: "'Discussion of CHIRP'" <chirp_users(a)intrepid.danplanet.com> > > Message-ID: <000601cddae3$6c632280$45296780$@net> > > Content-Type: text/plain; charset="us-ascii" > > > > The error message indicates that your cable is not plugged in all the > way. > > A common problem as Baofeng doesn't manufacture their own cables. > > See: http://www.miklor.com/uv5r/UV5R-ErrorMess.html > > > > If you haven't already, check out the UV5R User's Guide > > http://www.miklor.com/uv5r/UserGuide > > > > Enjoy your new Toy... > > John K3NXU > > > > > > From: chirp_users-bounces(a)intrepid.danplanet.com [mailto: > > chirp_users-bounces(a)intrepid.danplanet.com] On Behalf Of Rafael > Yerushalmi > > Sent: Saturday, December 15, 2012 10:38 AM > > To: chirp_users(a)intrepid.danplanet.com > > Subject: Re: [chirp_users] chirp_users Digest, Vol 48, Issue 6 > > > > Hello there. > > > > I have a UV5R BFB251 . i put the latest chrip & the usb driver 3.2.0.0 > > on win 7 becuse my computer have been with a virus but notning working > with > > the UV5R .i can see the com 3 ok & the driver 3.2.0.0 ok no yellow sigh . > > when I operate chirp after a few seconds the message is " Radio did not > > respond " > > on xp it was working good ... > > what is the setting for the com is it 1200 baud ? is it xon/xoff ? > > > > Need your help > > > > best 73 > > Thanks > > > >

3 2