December 2012 - Users - lists.chirpmyradio.com

[chirp_users] New Daily Build
by Build System 29 Dec '12

29 Dec '12

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20121229 A list of the changes included in this build (since the last daily) follows: Changes for Build #135 [Dan Smith <dsmith(a)danplanet.com>] Minor tweak to the menus to avoid letting users upload CSV files #93

1 0

Re: [chirp_users] chirp_users Digest, Vol 48, Issue 34
by Chris Drummond 28 Dec '12

28 Dec '12

Jim sign up ont this reflector lots of good onformation. 73 chris On Thu, Dec 27, 2012 at 1:00 PM, <chirp_users-request(a)intrepid.danplanet.com > wrote: > Send chirp_users mailing list submissions to > chirp_users(a)intrepid.danplanet.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://intrepid.danplanet.com/mailman/listinfo/chirp_users > or, via email, send a message with subject or body 'help' to > chirp_users-request(a)intrepid.danplanet.com > > You can reach the person managing the list at > chirp_users-owner(a)intrepid.danplanet.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of chirp_users digest..." > > > Today's Topics: > > 1. Re: uv r5 (John LaMartina) > 2. Re: Problem reading UHF data from radio using a Mac (Ed Danaher) > 3. Re: An early Christmas present for CHIRP users (Joe) > 4. Re: An early Christmas present for CHIRP users (Robert Terzi) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Wed, 26 Dec 2012 17:25:07 -0500 > From: "John LaMartina" <JohnLa(a)usa.net> > Subject: Re: [chirp_users] uv r5 > To: "'Charles Walgren'" <cwalgren65(a)ymail.com>, "'Discussion of > CHIRP'" <chirp_users(a)intrepid.danplanet.com> > Message-ID: <000001cde3b7$dcc8a630$9659f290$@net> > Content-Type: text/plain; charset="us-ascii" > > Chuck, > > Here's my suggestions: > > Review: http://www.miklor.com/uv5r/UV5R-Drivers.html > > This should help with the Driver issues. > > The Yahoo Group UV5R http://groups.yahoo.com/group/baofeng_uv5r/ > > has over 5,000 members that have tackled every issue the UV5R can throw at > you. > > I'd give them as much info as possible: http://www.miklor.com/uv5r/#assist > > > > They would probably be best to handle the hardware side and resolve in a > manner of minutes. > > Hope this helps. > > Enjoy your new toy. > > John K3NXU > > > > > > From: chirp_users-bounces(a)intrepid.danplanet.com [mailto: > chirp_users-bounces(a)intrepid.danplanet.com] On Behalf Of Charles Walgren > Sent: Wednesday, December 26, 2012 2:19 PM > To: nk8j(a)juno.com; chirp_users(a)intrepid.danplanet.com > Subject: Re: [chirp_users] uv r5 > > > > Can't get the USB cable to work, thus can't upload or download. Can't get > the freq. organized in the order I'd like..........Mainly > can't get the USB cable to work. ie, idenify correct com port, proper > unit, UV-5RA, verision 293?? > > > > CHUCK > > _____ > > From: "nk8j(a)juno.com" <nk8j(a)juno.com> > To: cwalgren65(a)ymail.com; chirp_users(a)intrepid.danplanet.com > Sent: Wednesday, December 26, 2012 1:42 PM > Subject: Re: [chirp_users] uv r5 > > > > need more details as to what is happening. > > ---------- Original Message ---------- > From: Charles Walgren <cwalgren65(a)ymail.com> > To: "chirp_users(a)intrepid.danplanet.com" < > chirp_users(a)intrepid.danplanet.com> > Subject: [chirp_users] uv r5 > Date: Wed, 26 Dec 2012 10:39:23 -0800 (PST) > > After two days of trying to download etc.......can't get to upload to > radio, save program, burn cd......I'm not a programer and > don't plan on becoming one.........I have windows 7, but feel like I'm > trying to use a brick.........Frustrated. > > > > > > CHUCK > > ____________________________________________________________ > NetZero now offers 4G mobile broadband. Sign up now. < > http://www.netzero.net/?refcd=NZINTISP0512T4GOUT1> > > > >

1 0

[chirp_users] New Daily Build
by Build System 28 Dec '12

28 Dec '12

Greetings, A new daily build of CHIRP is available. This includes changes made directly to the tree yesterday, and may include additional features, bug fixes, and/or bugs. If you are interested in trying it, grab it from the following location: http://trac.chirp.danplanet.com/chirp_daily/daily-20121226 A list of the changes included in this build (since the last daily) follows: Changes for Build #134 [Dan Smith <dsmith(a)danplanet.com>] [uv5r] Update tests image for change made in #370 Related to #370 [Dan Smith <dsmith(a)danplanet.com>] [tests] Fix test logic to tolerate IC-Q7's implicit AM bands Related to #297 [Jim Unroe <rock.unroe(a)gmail.com>] [icq7] Various stability fixes Fix: - Processing an image with invalid tone values - Initializing memory values before a set operation - Supporting frequencies below 30MHz Fixes #297

6 8

Re: [chirp_users] An early Christmas present for CHIRP users
by B Giff 27 Dec '12

27 Dec '12

Joe, Glad you got it working. The liveCD will not save anything to your computer. This is by design to prevent someone from accidentally damaging their Windows installation. If you would like to save the radio files, I recommend one of the following: 1) the "easier" method: after you boot the CD, insert a USB flash drive into a USB port. A window should open. At the top of the window you should see something like 'media disk' or 'media-4B3A' (just examples, not exactly what you will see). This is your USB drive. Linux doesn't use drive letters like Windows does. Anyway, in Chirp, use Save As and either save to the folder /media/whatever (from the top of the window) or save to the desktop and drag and drop. Note: do NOT pull the usb drive out until AFTER you shutdown/reboot the computer. Doing so could corrupt the files on the usb drive (Windows used to be like this too). 2) the preferred method: create a bootable USB (liveUSB) using the instructions on the wiki page of the download site. From there, boot to the USB drive. When you save, it will save to the USB drive. Same warning as above, don't remove the usb drive until after you shutdown/reboot into Windows. Several people use the liveCD or liveUSB as their primary radio loader, but honestly, that isn't what I built it for. My intent was to get people up and running so they wouldn't throw the radio across the room. Then, knowing that the radio works, the user could get Chirp working on Windows at their leisure. Let me know how you fare with the save. Bob

3 2

Re: [chirp_users] Problem reading UHF data from radio using a Mac
by Ed Danaher 27 Dec '12

27 Dec '12

Thanks, I missed that. Ed KK4LAL Message: 1 Date: Wed, 26 Dec 2012 18:40:50 GMT From: "nk8j(a)juno.com" <nk8j(a)juno.com> Subject: Re: [chirp_users] Problem reading UHF data from radio using a Mac To: chirp_users(a)intrepid.danplanet.com Message-ID: <20121226.104050.20479.0(a)webmail02.dca.untd.com> Content-Type: text/plain; charset="windows-1252" When looking at your frequencies. There should be a line that says "Memory Range 1 to xx. change the xx to 128 and press the go button. ---------- Original Message ---------- From: Ed Danaher <ed.danaher(a)gmail.com> To: chirp_users(a)intrepid.danplanet.com Subject: [chirp_users] Problem reading UHF data from radio using a Mac Date: Wed, 26 Dec 2012 11:38:42 -0500 I am a new user of Chirp so I'm still learning my way around. I have been able to read from my radio, a Wouxum� KG-UV3D, the 2m/440 version. I can upload the 2m data from the radio but not the 440. I have set Chirp to read all 128 memories, but only the 38 2m frequencies show up. Am I doing something wrong or is this a limitation of the software? I am using a Mac running OS X 10.6.8; the Mac OS X version of Chirp Version 0.2.3 (GTK 2.24.10, PyGTK 2.22.0, and Python 2.7.2). The cable is a Wouxun WXUSB USB programming cable. Anyone have any suggestions? Ed, KK4LAL

1 0

Re: [chirp_users] uv r5
by nk8j＠juno.com 26 Dec '12

26 Dec '12

need more details as to what is happening. ---------- Original Message ---------- From: Charles Walgren <cwalgren65(a)ymail.com> To: "chirp_users(a)intrepid.danplanet.com" <chirp_users(a)intrepid.danplanet.com> Subject: [chirp_users] uv r5 Date: Wed, 26 Dec 2012 10:39:23 -0800 (PST) After two days of trying to download etc.......can't get to upload to radio, save program, burn cd......I'm not a programer and don't plan on becoming one.........I have windows 7, but feel like I'm trying to use a brick.........Frustrated. CHUCK ____________________________________________________________ NetZero now offers 4G mobile broadband. Sign up now. http://www.netzero.net/?refcd=NZINTISP0512T4GOUT1

3 2

Re: [chirp_users] Problem reading UHF data from radio using a Mac
by nk8j＠juno.com 26 Dec '12

26 Dec '12

When looking at your frequencies. There should be a line that says "Memory Range 1 to xx. change the xx to 128 and press the go button. ---------- Original Message ---------- From: Ed Danaher <ed.danaher(a)gmail.com> To: chirp_users(a)intrepid.danplanet.com Subject: [chirp_users] Problem reading UHF data from radio using a Mac Date: Wed, 26 Dec 2012 11:38:42 -0500 I am a new user of Chirp so I'm still learning my way around. I have been able to read from my radio, a Wouxum� KG-UV3D, the 2m/440 version. I can upload the 2m data from the radio but not the 440. I have set Chirp to read all 128 memories, but only the 38 2m frequencies show up. Am I doing something wrong or is this a limitation of the software? I am using a Mac running OS X 10.6.8; the Mac OS X version of Chirp Version 0.2.3 (GTK 2.24.10, PyGTK 2.22.0, and Python 2.7.2). The cable is a Wouxun WXUSB USB programming cable. Anyone have any suggestions? Ed, KK4LAL ____________________________________________________________ Woman is 57 But Looks 27 Mom publishes simple facelift trick that angered doctors... http://thirdpartyoffers.juno.com/TGL3131/50db44ce880f244ce5154st04duc

1 0

[chirp_users] uv r5
by Charles Walgren 26 Dec '12

26 Dec '12

After two days of trying to download etc.......can't get to upload to radio, save program, burn cd......I'm not a programer and don't plan on becoming one.........I have windows 7, but feel like I'm trying to use a brick.........Frustrated. CHUCK

1 0

[chirp_users] Problem reading UHF data from radio using a Mac
by Ed Danaher 26 Dec '12

26 Dec '12

I am a new user of Chirp so I'm still learning my way around. I have been able to read from my radio, a Wouxum KG-UV3D, the 2m/440 version. I can upload the 2m data from the radio but not the 440. I have set Chirp to read all 128 memories, but only the 38 2m frequencies show up. Am I doing something wrong or is this a limitation of the software? I am using a Mac running OS X 10.6.8; the Mac OS X version of Chirp Version 0.2.3 (GTK 2.24.10, PyGTK 2.22.0, and Python 2.7.2). The cable is a Wouxun WXUSB USB programming cable. Anyone have any suggestions? Ed, KK4LAL

1 0

Re: [chirp_users] An early Christmas present for CHIRP users (GaryErrol)
by B Giff 26 Dec '12

26 Dec '12

Gary, A full set of instructions for using UNetbootin is on the wiki page below the download link. http://sourceforge.net/p/chirplivecd/wiki/Home/ Short answer: Xubuntu 12.04_Live also, make sure you put a number larger than zero in the "Space used to preserve files across reboots (Ubuntu only)" box. Again, see the wiki. Bob ------------------------------------- I down loaded UNetbootin and installed on a micro SD card in an USB adapter. When I ran the program it asks me to Select Distribution and than gives me a list. Which one should I choose? My operating system is XP. GaryErrol

1 0