- Developers - lists.chirpmyradio.com

[chirp_devel] [developer] Control fontsize of hex diff/dumpdisplay - #1681
by chirp.cordless＠xoxy.net 07 Jun '14

07 Jun '14

Resubmitted patch attached. -dan

1 0

Re: [chirp_devel] [developer] Control fontsize of hex diff/dumpdisplay - #1681
by chirp.cordless＠xoxy.net 07 Jun '14

07 Jun '14

Well, not quite what I expected. I have tried font sizes of 400, 300000, 0, -12, and -1234 and Pango does not generate an exception, it fact is seems to render what was asked for, mostly. 0 was a blank screen. 300000 actually seemed to be realized; scrolling about the window I was able to find some glyph edges. Of course, it's completely unusable, but there's no exception to handle. Doing some reading about Pango on the web, I think this is what it's built to do. The negative values were readable, but variable-width, making me nervous that something got mangled. But no exception generated. That's on a Mac, so Windows or linux might behave differently, but there's no exception I can generate and thus handle. Then out of whimsy I tried "twelve" (no quotes), expecting that would generate an exception from CONF.get_int(). Nope. It returned 0, no exception, resulting in an empty window. I suspect that's related to > However, I see that the ChirpConfigProxy wrapper is not going to raise a > sane exception for the case you're going to hit here. So between the odd behavior for negative fontsizes, and the lack of exception for non-integer, I've added some bounds checking, accepting [4, 144]. The values were chosen as marginally absurd, or more specifically, exceeding anything I expect is useful, but rendering recognizably so the developer-user can see they got what they asked for but probably not what they want. And minimal chance that someone will request larger/smaller down the line, even with 4k displays. Resubmitted patch to follow shortly. If you still want refinements I remain open to that, but I can't see what else to do at the moment. -dan On Jun 6, 2014, at 3:39 PM, Dan Smith - dsmith(a)danplanet.com wrote: >> For the first, what you're suggesting would be >> except: >> fontsize = 11 >> ?? >> I did test what happens if diff_fontsize is not there in chirp.config >> and what I submitted handles it. Does that cover your concern? > > Well, you can ignore this for the moment. In general, it's bad form to > catch Exception, which will swallow anything. It's better to catch the > actual thing you're expecting, so that if anything unexpected happens, > it bubbles up and gets noticed. > > However, I see that the ChirpConfigProxy wrapper is not going to raise a > sane exception for the case you're going to hit here. So, I'll retract > my comment on the grounds that my code you're calling is kinda broken :) > >> I'll look at specifying some weird fontsize and see if I can get >> an exception generated and make sure it's handled. >> I thought about bounds checking, but I figured the users are >> developers and could deal with the results of specifying something strange. >> But if it's just a try/except clause, seems worth it. > > Well, just see what happens. If it's something we can just log to the > debug log that the size was unsupported and default back to 11, that > seems like a good idea. > > --Dan

1 0

Re: [chirp_devel] [developer] Control fontsize of hex diff/dumpdisplay - #1681
by chirp.cordless＠xoxy.net 06 Jun '14

06 Jun '14

Ok, that's the sort of reception I was hoping for, and I don't mind iterating. My code is mostly imitation of what I find elsewhere in the Chirp code, and I recognize I might be missing some nuances. Hold integrating the patch, I will resubmit in a day or two. For the first, what you're suggesting would be except: fontsize = 11 ?? I did test what happens if diff_fontsize is not there in chirp.config and what I submitted handles it. Does that cover your concern? I'll look at specifying some weird fontsize and see if I can get an exception generated and make sure it's handled. I thought about bounds checking, but I figured the users are developers and could deal with the results of specifying something strange. But if it's just a try/except clause, seems worth it. Thanks! -dan On Jun 5, 2014, at 4:15 PM, Dan Smith - dsmith(a)danplanet.com wrote: >> + try: >> + fontsize = CONF.get_int("diff_fontsize", "developer") >> + except Exception: >> + fontsize = 11 > > If you're going to add hidden configuration options (which I think is > probably reasonable for these sorts of things), lets start a > README.developers in the top level directory where we at least mention > that they exist. > > Also, please don't just catch Exception, here, catch whatever > ConfigParser raises if it's not there. > >> - fontdesc = pango.FontDescription("Courier 11") >> + fontdesc = pango.FontDescription("Courier %i" % fontsize) > > I think some fonts don't have all the sizes between 1 and infinity. What > happens if you specify something unsupported? If it's something we can > catch and fall back to 11 again, that'd be good. That said, if it's a > hidden developer-only tunable, it's not a huge deal. > > But in general, if this makes things easier for you, I'm cool with it. > > Thanks! > > --Dan > > _______________________________________________ > chirp_devel mailing list > chirp_devel(a)intrepid.danplanet.com > http://intrepid.danplanet.com/mailman/listinfo/chirp_devel > Developer docs: http://chirp.danplanet.com/projects/chirp/wiki/Developers

2 1

[chirp_devel] [csv] Friendlier defaults for missing cToneFreq/rToneFreq columns in csv import - Fixes #1577
by chirp.cordless＠xoxy.net 05 Jun '14

05 Jun '14

Patch attached. -dan

3 5

Re: [chirp_devel] How to brick an FT-60
by chirp.cordless＠xoxy.net 05 Jun '14

05 Jun '14

On Mar 23, 2014, at 7:13 AM, Jens J. - kd4tjx(a)yahoo.com wrote: > Did you say that although the radio appears unresponsive, > will it still "act" as if it will clone? If so, will it upload or download, or both? Multiple attempts at both upload and download time out. Download after several seconds, upload immediately. I have put it into clone mode enough times that I don't need a display to do it, it's almost muscle memory. The radio shows no indication of response, either in the display or to chirp. > Also, > Will it visibly go into alignment mode? > To enter the Alignment mode: > • Press and hold in the MONI and LAMP switches turn- > ing the radio on. Once the radio is on, release these > two switches. > • Press the keypad in the following sequence: > [(MHz)] [0( )SET] > [1(SQ TYP)] [7(P1)] [V/M(PRI)] > • Press the [F/W] key to cause “A0 REF.xxx” to appear on the display for five seconds, this signifies that the trans- ceiver is now in the “Alignment Mode.” Nope, no indication of anything in response to several repetitions of this sequence. The backlight remains on, display blank. > ... > I would be curious to examine your "bad" image vs a previous "good" image, vs even one you might have taken much, much earlier in your development process. > Can you share them privately with me directly off-list? I can provide the "bad" image and one dumped a couple of hours earlier. What I can't say for sure is that uploading the one from a little earlier wouldn't brick it also. The mapping process didn't do very much in the way of uploads, it was mostly twiddle settings, download and diff. Earlier in the day Mar 22, when this happened, I had been going back on a verification pass, and there were some images before Set item 11 CW WRT that I had uploaded, button-tweaked, downloaded and diffed. It will take me a little time to reconstruct that; it's possible I can identify a file downloaded a little earlier than the BrickMaker.img on Feb 7 that I uploaded March 22 without bricking the radio. Let me work on that. For now, here's the diff between the BrickMaker and the image created immediately previously on Feb 7, which was for Item 7, BELL, setting it to 'Cont'. Hope this works, I had to use a fixed width font and that required using RTF for this mail; I hope it's not mangled. -0024 x0018: 12 02 00 00 00 01 00 07 ........ +0024 x0018: 12 02 00 00 00 01 00 0b ........ ^ -0048 x0030: 05 01 04 2e 04 2e 03 00 ........ +0048 x0030: 00 01 04 2e 04 2e 03 00 ........ ^ -0536 x0218: ff ff ff ff ff ff ff ff ........ +0536 x0218: 0a 0b 0c 0c 0b 0b ff ff ........ ^^ ^^ ^^ ^^ ^^ ^^ -28616 x6FC8: 4d 00 00 00 00 00 00 00 M....... +28616 x6FC8: 95 00 00 00 00 00 00 00 ........ ^^ ^ Byte 31 is the "Set Item Number" saved in nonvolatile flash, 7 vs 11. Byte 48 ls 3 bits is the 'Cont' value for BELL. The string starting at 536 is the CW WRT value I keyed in, "ABCCBB". 28616 is the checksum. Pretty innocuous looking eh? But I can't say with any confidence that uploading the other image wouldn't brick it as well. I could supply images I have successfully uploaded, including immediately prior to bricking the second radio with the same image that bricked the first. But the diffs would be mind-numbing, they were 'operational' configs unrelated to this development work. Let me see what I can come up with. -dan

3 3

[chirp_devel] Build test results: Failure
by Build System 01 Jun '14

01 Jun '14

Tested changes: [Dan Drogichen <chirp.cordless(a)xoxy.net>] [csv] Friendlier defaults for missing cToneFreq/rToneFreq columns in csv import - Fixes #1577 Add a _clean_tmode() function to the generic CSVRadio class in generic_csv.py. Check for the existence of csv headings "rToneFreq" and "cToneFreq" in the header line. If exactly one is present, use the value in that column for both rTone and cTone for each channel imported. #1577 Full log: [...truncated 27 lines...] test_type_u32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u8 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_char (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string_invalid_chars (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string_wrong_length (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_comment_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok test_comment_inline_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok test_missing_semicolon (tests.unit.test_bitwise.TestBitwiseErrors) ... ok test_seek (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_seekto (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_struct_one_element (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_two_elements (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_writes (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok split_tone_encode_test_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_none (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_none (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_fix_rounded_step_250 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_500 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_750 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_12_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_2_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_5_0 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_6_25 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_fractional_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step_fail (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_format_freq (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_bad (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_decimal (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whitespace (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whole (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_ensure_has_calls_almost_full (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_empty (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_partial (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full1 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full2 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_urcall_full (tests.unit.test_import_logic.DstarTests) ... ok test_import_bank (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffA_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffB_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_negative (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_too_big_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_uhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_errors (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_warnings (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_invalid (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_am (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_fm (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_name (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_closest (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_dst (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_src (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_same (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffA_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffB_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModelIndexInterface) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_icom_bank (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_index_bounds (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_next_mapping_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_auto_tone_mode_cross (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_pol (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_rx (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tone (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tsql (tests.unit.test_memedit_edits.TestEdits) ... ok test_init (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_bad_portnames (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_sorted (tests.unit.test_platform.Win32PlatformTest) ... ok test_apply_callback (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_group (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_multi (tests.unit.test_settings.TestSettingContainers) ... ok test_changed (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_boolean (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_float (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_integer (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_list (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_string (tests.unit.test_settings.TestSettingValues) ... ok test_validate_callback (tests.unit.test_settings.TestSettingValues) ... ok test_delete_hole_with_all (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_all_full (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_without_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_with_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_without_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok ---------------------------------------------------------------------- Ran 151 tests in 0.180s OK Registered Icom_IC-2820H = IC2820Radio Registered TYT_TH-UVF8D = TYTUVF8DRadio Registered AnyTone_5888UV = AnyTone5888UVRadio Registered Intek_HR-2040 = IntekHR2040Radio Registered Polmar_DB-50M = PolmarDB50MRadio Registered Powerwerx_DB-750X = PowerwerxDB750XRadio Registered Icom_IC-2200H = IC2200Radio Registered Yaesu_FT-2800M = FT2800Radio Registered Yaesu_VX-3 = VX3Radio Registered Icom_IC-2100H = IC2100Radio Registered Yaesu_FTM-350 = FTM350Radio Registered Icom_IC-91_92AD_ICF_File = IC9xICFRadio Registered Icom_IC-V82_U82 = ICx8xRadio Registered Yaesu_VX-6 = VX6Radio Registered Yaesu_VX-5 = VX5Radio Registered Yaesu_FT-60 = FT60Radio Registered Yaesu_VX-7 = VX7Radio Registered Baofeng_UV-5R = BaofengUV5R Registered Baofeng_F-11 = BaofengF11Radio Registered Baofeng_UV-82 = BaofengUV82Radio Registered Baofeng_UV-6 = BaofengUV6Radio Registered Intek_KT-980HP = IntekKT980Radio Registered Yaesu_FT-1802M = FT1802Radio Registered Kenwood_TK-7102 = KenwoodTK7102Radio Registered Kenwood_TK-8102 = KenwoodTK8102Radio Registered Kenwood_TK-7108 = KenwoodTK7108Radio Registered Kenwood_TK-8108 = KenwoodTK8108Radio Registered Icom_ID-31A = ID31Radio Registered Icom_ID-51A = ID51Radio Registered Icom_IC-2720H = IC2720Radio Registered Icom_IC-T8A = ICT8ARadio Registered Wouxun_KG-UVD1P = KGUVD1PRadio Registered Wouxun_KG-UV6 = KGUV6DRadio Registered Wouxun_KG-816 = KG816Radio Registered Wouxun_KG-818 = KG818Radio Registered TYT_TH-UVF1 = TYTTHUVF1Radio Registered Yaesu_FT-90 = FT90Radio Registered Generic_CSV = CSVRadio Registered Commander_KG-UV = CommanderCSVRadio Registered RT_Systems_CSV = RTCSVRadio Registered Kenwood_ITM = ITMRadio Registered Alinco_DR03T = DR03Radio Registered Alinco_DR06T = DR06Radio Registered Alinco_DR135T = DR135Radio Registered Alinco_DR235T = DR235Radio Registered Alinco_DR435T = DR435Radio Registered Alinco_DJ596 = DJ596Radio Registered Jetstream_JT220M = JT220MRadio Registered Alinco_DJ175 = DJ175Radio Registered Kenwood_TH-D7 = THD7Radio Registered Kenwood_TH-D7G = THD7GRadio Registered Kenwood_TM-D700 = TMD700Radio Registered Kenwood_TM-V7 = TMV7Radio Registered Kenwood_TM-G707 = TMG707Radio Registered Kenwood_TH-G71 = THG71Radio Registered Kenwood_TH-F6 = THF6ARadio Registered Kenwood_TH-F7 = THF7ERadio Registered Kenwood_TM-D710 = TMD710Radio Registered Kenwood_TH-D72_live_mode = THD72Radio Registered Kenwood_TM-V71 = TMV71Radio Registered Kenwood_TH-K2 = THK2Radio Registered Kenwood_TM-271 = TM271Radio Registered Kenwood_TM-281 = TM281Radio Registered Kenwood_TM-471 = TM471Radio Registered Yaesu_VX-8_R = VX8Radio Registered Yaesu_VX-8_DR = VX8DRadio Registered Yaesu_VX-8_GE = VX8GERadio Registered Icom_IC-T7H = ICT7HRadio Registered Icom_IC-Q7A = ICQ7Radio Registered Baofeng_UV-B5 = BaofengUVB5 Registered Generic_XML = XMLRadio Registered Kenwood_HMK = HMKRadio Registered Kenwood_TH-D72_clone_mode = THD72Radio Registered Icom_IC-91_92AD = IC9xRadio Registered Icom_IC-T70 = ICT70Radio Registered Icom_IC-208H = IC208Radio Registered Icom_ID-800H_v2 = ID800v2Radio Registered Icom_7200 = Icom7200Radio Registered Icom_7000 = Icom7000Radio Registered Icom_746 = Icom746Radio Registered ARRL_Travel_Plus = TpeRadio Registered Vertex_Standard_VXA-700 = VXA700Radio Registered Icom_IC-W32A = ICW32ARadio Registered Baofeng_UV-3R = UV3RRadio Registered Yaesu_VX-2 = VX2Radio Registered Puxing_PX-777 = Puxing777Radio Registered Puxing_PX-2R = Puxing2RRadio Registered Baojie_BJ-UV55 = BaojieBJUV55Radio Registered Baofeng_BF-888 = H777Radio Registered Yaesu_FT-7800_7900 = FT7800Radio Registered Yaesu_FT-8800 = FT8800Radio Registered Yaesu_FT-8900 = FT8900Radio Registered KYD_NC-630A = NC630aRadio Registered Yaesu_FT-817 = FT817Radio Registered Yaesu_FT-817ND = FT817NDRadio Registered Yaesu_FT-817ND_US = FT817NDUSRadio Registered Yaesu_FT-857_897 = FT857Radio Registered Yaesu_FT-857_897_US = FT857USRadio Registered Yaesu_VX-170 = VX170Radio Registered Icom_ID-880H = ID880Radio Registered Icom_ID-80H = ID80Radio Registered TYT_TH-UV3R = TYTUV3RRadio Alinco DJ175 Detect PASSED: All tests Alinco DJ175 CopyAll PASSED: All tests Alinco DJ175 Clone PASSED: All tests Alinco DJ175 BruteForce PASSED: All tests Alinco DJ175 Edges PASSED: All tests Alinco DJ175 Banks SKIPPED: Banks not supported Alinco DJ596 Detect PASSED: All tests Alinco DJ596 CopyAll PASSED: All tests Alinco DJ596 Clone PASSED: All tests Alinco DJ596 BruteForce PASSED: All tests Alinco DJ596 Edges PASSED: All tests Alinco DJ596 Banks SKIPPED: Banks not supported Alinco DR235T Detect PASSED: All tests Alinco DR235T CopyAll PASSED: All tests Alinco DR235T Clone PASSED: All tests Alinco DR235T BruteForce PASSED: All tests Alinco DR235T Edges PASSED: All tests Alinco DR235T Banks SKIPPED: Banks not supported Baofeng BF-888 Detect PASSED: All tests Baofeng BF-888 CopyAll PASSED: All tests Baofeng BF-888 Clone PASSED: All tests Baofeng BF-888 BruteForce PASSED: All tests Baofeng BF-888 Edges PASSED: All tests Baofeng BF-888 Banks SKIPPED: Banks not supported Baofeng F-11 Detect PASSED: All tests Baofeng F-11 CopyAll PASSED: All tests Baofeng F-11 Clone PASSED: All tests Baofeng F-11 BruteForce PASSED: All tests Baofeng F-11 Edges PASSED: All tests Baofeng F-11 Banks SKIPPED: Banks not supported Baofeng UV-3R Detect PASSED: All tests Baofeng UV-3R CopyAll PASSED: All tests Baofeng UV-3R Clone PASSED: All tests Baofeng UV-3R BruteForce PASSED: All tests Baofeng UV-3R Edges PASSED: All tests Baofeng UV-3R Banks SKIPPED: Banks not supported Baofeng UV-5R Detect PASSED: All tests Baofeng UV-5R CopyAll PASSED: All tests Baofeng UV-5R Clone PASSED: All tests Baofeng UV-5R BruteForce PASSED: All tests Baofeng UV-5R Edges PASSED: All tests Baofeng UV-5R Banks SKIPPED: Banks not supported Baofeng UV-B5 Detect PASSED: All tests Baofeng UV-B5 CopyAll PASSED: All tests Baofeng UV-B5 Clone PASSED: All tests Baofeng UV-B5 BruteForce PASSED: All tests Baofeng UV-B5 Edges PASSED: All tests Baofeng UV-B5 Banks SKIPPED: Banks not supported Icom IC-208H Detect PASSED: All tests Icom IC-208H CopyAll PASSED: All tests Icom IC-208H Clone PASSED: All tests Icom IC-208H BruteForce PASSED: All tests Icom IC-208H Edges PASSED: All tests Icom IC-208H Banks PASSED: All tests Icom IC-2100H Detect PASSED: All tests Icom IC-2100H CopyAll PASSED: All tests Icom IC-2100H Clone PASSED: All tests Icom IC-2100H BruteForce PASSED: All tests Icom IC-2100H Edges PASSED: All tests Icom IC-2100H Banks SKIPPED: Banks not supported Icom IC-2200H Detect PASSED: All tests Icom IC-2200H CopyAll PASSED: All tests Icom IC-2200H Clone PASSED: All tests Icom IC-2200H BruteForce PASSED: All tests Icom IC-2200H Edges PASSED: All tests Icom IC-2200H Banks PASSED: All tests Icom IC-2720H Detect PASSED: All tests Icom IC-2720H CopyAll PASSED: All tests Icom IC-2720H Clone PASSED: All tests Icom IC-2720H BruteForce PASSED: All tests Icom IC-2720H Edges PASSED: All tests Icom IC-2720H Banks PASSED: All tests Icom IC-2820H Detect PASSED: All tests Icom IC-2820H CopyAll PASSED: All tests Icom IC-2820H Clone PASSED: All tests Icom IC-2820H BruteForce PASSED: All tests Icom IC-2820H Edges PASSED: All tests Icom IC-2820H Banks PASSED: All tests Icom IC-Q7A Detect PASSED: All tests Icom IC-Q7A CopyAll PASSED: All tests Icom IC-Q7A Clone PASSED: All tests Icom IC-Q7A BruteForce PASSED: All tests Icom IC-Q7A Edges PASSED: All tests Icom IC-Q7A Banks SKIPPED: Banks not supported Icom IC-T70 Detect PASSED: All tests Icom IC-T70 CopyAll PASSED: All tests Icom IC-T70 Clone PASSED: All tests Icom IC-T70 BruteForce PASSED: All tests Icom IC-T70 Edges PASSED: All tests Icom IC-T70 Banks PASSED: All tests Icom IC-T7H Detect PASSED: All tests Icom IC-T7H CopyAll PASSED: All tests Icom IC-T7H Clone PASSED: All tests Icom IC-T7H BruteForce PASSED: All tests Icom IC-T7H Edges PASSED: All tests Icom IC-T7H Banks SKIPPED: Banks not supported Icom IC-T8A Detect PASSED: All tests Icom IC-T8A CopyAll PASSED: All tests Icom IC-T8A Clone PASSED: All tests Icom IC-T8A BruteForce PASSED: All tests Icom IC-T8A Edges PASSED: All tests Icom IC-T8A Banks SKIPPED: Banks not supported Icom IC-V82/U82 Detect PASSED: All tests Icom IC-V82/U82 CopyAll PASSED: All tests Icom IC-V82/U82 Clone PASSED: All tests Icom IC-V82/U82 BruteForce PASSED: All tests Icom IC-V82/U82 Edges PASSED: All tests Icom IC-V82/U82 Banks PASSED: All tests Icom IC-W32A VHF Detect PASSED: All tests Icom IC-W32A VHF CopyAll PASSED: All tests Icom IC-W32A VHF Clone PASSED: All tests Icom IC-W32A VHF BruteForce PASSED: All tests Icom IC-W32A VHF Edges PASSED: All tests Icom IC-W32A VHF Banks SKIPPED: Banks not supported Icom IC-W32A UHF Detect PASSED: All tests Icom IC-W32A UHF CopyAll PASSED: All tests Icom IC-W32A UHF Clone PASSED: All tests Icom IC-W32A UHF BruteForce PASSED: All tests Icom IC-W32A UHF Edges PASSED: All tests Icom IC-W32A UHF Banks SKIPPED: Banks not supported Icom ID-31A Detect PASSED: All tests Icom ID-31A CopyAll PASSED: All tests Icom ID-31A Clone PASSED: All tests Icom ID-31A BruteForce PASSED: All tests Icom ID-31A Edges PASSED: All tests Icom ID-31A Banks PASSED: All tests Icom ID-51A Detect PASSED: All tests Icom ID-51A CopyAll PASSED: All tests Icom ID-51A Clone PASSED: All tests Icom ID-51A BruteForce PASSED: All tests Icom ID-51A Edges PASSED: All tests Icom ID-51A Banks PASSED: All tests Icom ID-800H v2 Detect PASSED: All tests Icom ID-800H v2 CopyAll PASSED: All tests Icom ID-800H v2 Clone PASSED: All tests Icom ID-800H v2 BruteForce PASSED: All tests Icom ID-800H v2 Edges PASSED: All tests Icom ID-800H v2 Banks PASSED: All tests Icom ID-880H Detect PASSED: All tests Icom ID-880H CopyAll PASSED: All tests Icom ID-880H Clone PASSED: All tests Icom ID-880H BruteForce PASSED: All tests Icom ID-880H Edges PASSED: All tests Icom ID-880H Banks PASSED: All tests Jetstream JT220M Detect PASSED: All tests Jetstream JT220M CopyAll PASSED: All tests Jetstream JT220M Clone PASSED: All tests Jetstream JT220M BruteForce PASSED: All tests Jetstream JT220M Edges PASSED: All tests Jetstream JT220M Banks SKIPPED: Banks not supported Kenwood TH-D72 (clone Detect PASSED: All tests Kenwood TH-D72 (clone CopyAll PASSED: All tests Kenwood TH-D72 (clone Clone PASSED: All tests Kenwood TH-D72 (clone BruteForce PASSED: All tests Kenwood TH-D72 (clone Edges PASSED: All tests Kenwood TH-D72 (clone Banks SKIPPED: Banks not supported Kenwood TK-8102 Detect PASSED: All tests Kenwood TK-8102 CopyAll PASSED: All tests Kenwood TK-8102 Clone PASSED: All tests Kenwood TK-8102 BruteForce PASSED: All tests Kenwood TK-8102 Edges PASSED: All tests Kenwood TK-8102 Banks SKIPPED: Banks not supported Polmar DB-50M Detect PASSED: All tests Polmar DB-50M CopyAll PASSED: All tests Polmar DB-50M Clone PASSED: All tests Polmar DB-50M BruteForce PASSED: All tests Polmar DB-50M Edges PASSED: All tests Polmar DB-50M Banks SKIPPED: Banks not supported Puxing PX-2R Detect PASSED: All tests Puxing PX-2R CopyAll PASSED: All tests Puxing PX-2R Clone PASSED: All tests Puxing PX-2R BruteForce PASSED: All tests Puxing PX-2R Edges PASSED: All tests Puxing PX-2R Banks SKIPPED: Banks not supported Puxing PX-777 Detect PASSED: All tests Puxing PX-777 CopyAll PASSED: All tests Puxing PX-777 Clone PASSED: All tests Puxing PX-777 BruteForce PASSED: All tests Puxing PX-777 Edges PASSED: All tests Puxing PX-777 Banks SKIPPED: Banks not supported TYT TH-UV3R Detect PASSED: All tests TYT TH-UV3R CopyAll PASSED: All tests TYT TH-UV3R Clone PASSED: All tests TYT TH-UV3R BruteForce PASSED: All tests TYT TH-UV3R Edges PASSED: All tests TYT TH-UV3R Banks SKIPPED: Banks not supported TYT TH-UVF1 Detect PASSED: All tests TYT TH-UVF1 CopyAll PASSED: All tests TYT TH-UVF1 Clone PASSED: All tests TYT TH-UVF1 BruteForce PASSED: All tests TYT TH-UVF1 Edges PASSED: All tests TYT TH-UVF1 Banks SKIPPED: Banks not supported Vertex VXA-700 Detect PASSED: All tests Vertex VXA-700 CopyAll PASSED: All tests Vertex VXA-700 Clone PASSED: All tests Vertex VXA-700 BruteForce PASSED: All tests Vertex VXA-700 Edges PASSED: All tests Vertex VXA-700 Banks SKIPPED: Banks not supported Wouxun KG-816 Detect PASSED: All tests Wouxun KG-816 CopyAll PASSED: All tests Wouxun KG-816 Clone PASSED: All tests Wouxun KG-816 BruteForce PASSED: All tests Wouxun KG-816 Edges PASSED: All tests Wouxun KG-816 Banks SKIPPED: Banks not supported Wouxun KG-818 Detect PASSED: All tests Wouxun KG-818 CopyAll PASSED: All tests Wouxun KG-818 Clone PASSED: All tests Wouxun KG-818 BruteForce PASSED: All tests Wouxun KG-818 Edges PASSED: All tests Wouxun KG-818 Banks SKIPPED: Banks not supported Wouxun KG-UV6 Detect PASSED: All tests Wouxun KG-UV6 CopyAll PASSED: All tests Wouxun KG-UV6 Clone PASSED: All tests Wouxun KG-UV6 BruteForce PASSED: All tests Wouxun KG-UV6 Edges PASSED: All tests Wouxun KG-UV6 Banks SKIPPED: Banks not supported Wouxun KG-UVD1P Detect PASSED: All tests Wouxun KG-UVD1P CopyAll PASSED: All tests Wouxun KG-UVD1P Clone PASSED: All tests Wouxun KG-UVD1P BruteForce PASSED: All tests Wouxun KG-UVD1P Edges PASSED: All tests Wouxun KG-UVD1P Banks SKIPPED: Banks not supported Yaesu FT-1802M Detect PASSED: All tests Yaesu FT-1802M CopyAll PASSED: All tests Yaesu FT-1802M Clone PASSED: All tests Yaesu FT-1802M BruteForce PASSED: All tests Yaesu FT-1802M Edges PASSED: All tests Yaesu FT-1802M Banks SKIPPED: Banks not supported Yaesu FT-2800M Detect PASSED: All tests Yaesu FT-2800M CopyAll PASSED: All tests Yaesu FT-2800M Clone PASSED: All tests Yaesu FT-2800M BruteForce PASSED: All tests Yaesu FT-2800M Edges PASSED: All tests Yaesu FT-2800M Banks SKIPPED: Banks not supported Yaesu FT-60 Detect PASSED: All tests Yaesu FT-60 CopyAll PASSED: All tests Yaesu FT-60 Clone PASSED: All tests Yaesu FT-60 BruteForce PASSED: All tests Yaesu FT-60 Edges PASSED: All tests Yaesu FT-60 Banks SKIPPED: Banks not supported Yaesu FT-7800/7900 Detect PASSED: All tests Yaesu FT-7800/7900 CopyAll PASSED: All tests Yaesu FT-7800/7900 Clone PASSED: All tests Yaesu FT-7800/7900 BruteForce PASSED: All tests Yaesu FT-7800/7900 Edges PASSED: All tests Yaesu FT-7800/7900 Banks PASSED: All tests Yaesu FT-817 Detect PASSED: All tests Yaesu FT-817 CopyAll PASSED: All tests Yaesu FT-817 Clone PASSED: All tests Yaesu FT-817 BruteForce PASSED: All tests Yaesu FT-817 Edges PASSED: All tests Yaesu FT-817 Banks SKIPPED: Banks not supported Yaesu FT-817ND Detect PASSED: All tests Yaesu FT-817ND CopyAll PASSED: All tests Yaesu FT-817ND Clone PASSED: All tests Yaesu FT-817ND BruteForce PASSED: All tests Yaesu FT-817ND Edges PASSED: All tests Yaesu FT-817ND Banks SKIPPED: Banks not supported Yaesu FT-817ND (US) Detect PASSED: All tests Yaesu FT-817ND (US) CopyAll PASSED: All tests Yaesu FT-817ND (US) Clone PASSED: All tests Yaesu FT-817ND (US) BruteForce PASSED: All tests Yaesu FT-817ND (US) Edges PASSED: All tests Yaesu FT-817ND (US) Banks SKIPPED: Banks not supported Yaesu FT-857/897 Detect PASSED: All tests Yaesu FT-857/897 CopyAll PASSED: All tests Yaesu FT-857/897 Clone PASSED: All tests Yaesu FT-857/897 BruteForce PASSED: All tests Yaesu FT-857/897 Edges PASSED: All tests Yaesu FT-857/897 Banks SKIPPED: Banks not supported Yaesu FT-857/897 (U Detect PASSED: All tests Yaesu FT-857/897 (U CopyAll PASSED: All tests Yaesu FT-857/897 (U Clone PASSED: All tests Yaesu FT-857/897 (U BruteForce PASSED: All tests Yaesu FT-857/897 (U Edges PASSED: All tests Yaesu FT-857/897 (U Banks SKIPPED: Banks not supported Yaesu FT-8800 Left Detect PASSED: All tests Yaesu FT-8800 Left CopyAll PASSED: All tests Yaesu FT-8800 Left Clone PASSED: All tests Yaesu FT-8800 Left BruteForce PASSED: All tests Yaesu FT-8800 Left Edges PASSED: All tests Yaesu FT-8800 Left Banks PASSED: All tests Yaesu FT-8800 Right Detect PASSED: All tests Yaesu FT-8800 Right CopyAll PASSED: All tests Yaesu FT-8800 Right Clone PASSED: All tests Yaesu FT-8800 Right BruteForce PASSED: All tests Yaesu FT-8800 Right Edges PASSED: All tests Yaesu FT-8800 Right Banks PASSED: All tests Yaesu FT-8900 Detect PASSED: All tests Yaesu FT-8900 CopyAll PASSED: All tests Yaesu FT-8900 Clone PASSED: All tests Yaesu FT-8900 BruteForce PASSED: All tests Yaesu FT-8900 Edges PASSED: All tests Yaesu FT-8900 Banks SKIPPED: Banks not supported Yaesu FTM-350 Left Detect PASSED: All tests Yaesu FTM-350 Left CopyAll PASSED: All tests Yaesu FTM-350 Left Clone PASSED: All tests Yaesu FTM-350 Left BruteForce PASSED: All tests Yaesu FTM-350 Left Edges PASSED: All tests Yaesu FTM-350 Left Banks SKIPPED: Banks not supported Yaesu FTM-350 Right Detect PASSED: All tests Yaesu FTM-350 Right CopyAll PASSED: All tests Yaesu FTM-350 Right Clone PASSED: All tests Yaesu FTM-350 Right BruteForce PASSED: All tests Yaesu FTM-350 Right Edges PASSED: All tests Yaesu FTM-350 Right Banks SKIPPED: Banks not supported Yaesu VX-2 Detect PASSED: All tests Yaesu VX-2 CopyAll PASSED: All tests Yaesu VX-2 Clone PASSED: All tests Yaesu VX-2 BruteForce PASSED: All tests Yaesu VX-2 Edges PASSED: All tests Yaesu VX-2 Banks PASSED: All tests Yaesu VX-3 Detect PASSED: All tests Yaesu VX-3 CopyAll PASSED: All tests Yaesu VX-3 Clone PASSED: All tests Yaesu VX-3 BruteForce PASSED: All tests Yaesu VX-3 Edges PASSED: All tests Yaesu VX-3 Banks PASSED: All tests Yaesu VX-5 Detect PASSED: All tests Yaesu VX-5 CopyAll PASSED: All tests Yaesu VX-5 Clone PASSED: All tests Yaesu VX-5 BruteForce PASSED: All tests Yaesu VX-5 Edges PASSED: All tests Yaesu VX-5 Banks PASSED: All tests Yaesu VX-6 Detect PASSED: All tests Yaesu VX-6 CopyAll PASSED: All tests Yaesu VX-6 Clone PASSED: All tests Yaesu VX-6 BruteForce PASSED: All tests Yaesu VX-6 Edges PASSED: All tests Yaesu VX-6 Banks PASSED: All tests Yaesu VX-7 Detect PASSED: All tests Yaesu VX-7 CopyAll PASSED: All tests Yaesu VX-7 Clone PASSED: All tests Yaesu VX-7 BruteForce PASSED: All tests Yaesu VX-7 Edges PASSED: All tests Yaesu VX-7 Banks PASSED: All tests Yaesu VX-8 R Detect PASSED: All tests Yaesu VX-8 R CopyAll PASSED: All tests Yaesu VX-8 R Clone PASSED: All tests Yaesu VX-8 R BruteForce PASSED: All tests Yaesu VX-8 R Edges PASSED: All tests Yaesu VX-8 R Banks PASSED: All tests ---------------------------------------------------------------------- Results: TOTAL : 342 FAILED : 0 SKIPPED: 38 PASSED : 304 CRASHED: 0 FAIL: Please keep commit message lines to <80 columns ================================================ Tests FAILED: style tests Build step 'Execute shell' marked build as failure Email was triggered for: Failure Sending email for trigger: Failure

4 5

[chirp_devel] [PATCH] [UV-82] Add Additional Settings and Expand Frequency Range [uv5r.py]
by Jim Unroe 22 May '14

22 May '14

# HG changeset patch # User Jim Unroe <rock.unroe(a)gmail.com> # Date 1400798682 14400 # Node ID a009a57dd6ca2766783abd8e89656b483eb9081e # Parent e29cf57708439f342a095c68674f3642817710d4 [UV-82] Add Additional Settings and Expand Frequency Range [uv5r.py] update settings structure add new UV-82 basetype add check for new firmware version string add new settings - VFO/MR Switching (UV-82C only) - Single PTT (UV-82C only) expand VHF frequency range to match the factory shipped frequency range #1651 diff -r e29cf5770843 -r a009a57dd6ca chirp/uv5r.py --- a/chirp/uv5r.py Sun May 11 11:42:36 2014 -0400 +++ b/chirp/uv5r.py Thu May 22 18:44:42 2014 -0400 @@ -134,7 +134,9 @@ unknown2:1, reset:1, menu:1; - u8 vfomrlock; + u8 unknown1:6, + singleptt:1, + vfomrlock:1; u8 workmode; u8 keylock; } settings; @@ -252,7 +254,7 @@ BASETYPE_UV5R = ["BFS", "BFB"] BASETYPE_F11 = ["USA"] -BASETYPE_UV82 = ["B82S", "BF82"] +BASETYPE_UV82 = ["US2S", "B82S", "BF82"] BASETYPE_BJ55 = ["BJ55"] # needed for for the Baojie UV-55 in bjuv55.py BASETYPE_UV6 = ["BF1"] BASETYPE_KT980HP = ["BFP3"] @@ -877,6 +879,9 @@ elif 'B82S' in version_tag: idx = version_tag.index("B82S") + 4 return int(version_tag[idx:idx + 2]) + 8200 + elif 'US2S' in version_tag: + idx = version_tag.index("US2S") + 4 + return int(version_tag[idx:idx + 2]) + 8200 elif 'USA' in version_tag: idx = version_tag.index("USA") + 3 return int(version_tag[idx:idx + 3]) + 11000 @@ -1076,6 +1081,18 @@ RadioSettingValueBoolean(_settings.vfomrlock)) advanced.append(rs) + if self.MODEL == "UV-82": + # this is a UV-82C only feature + rs = RadioSetting("vfomrlock", "VFO/MR Switching (UV-82C only)", + RadioSettingValueBoolean(_settings.vfomrlock)) + advanced.append(rs) + + if self.MODEL == "UV-82": + # this is an UV-82C only feature + rs = RadioSetting("singleptt", "Single PTT (UV-82C only)", + RadioSettingValueBoolean(_settings.singleptt)) + advanced.append(rs) + if len(self._mmap.get_packed()) == 0x1808: # Old image, without aux block return group @@ -1495,6 +1512,11 @@ _basetype = BASETYPE_UV82 _idents = [UV5R_MODEL_UV82] + def get_features(self): + rf = BaofengUV5R.get_features(self) + rf.valid_bands = [(130000000, 176000000), (400000000, 521000000)] + return rf + def _is_orig(self): # Override this for UV82 to always return False return False

1 0

[chirp_devel] [PATCH] [ic9x] Fix communication problems with Icom IC91/92
by Marco Filippi IZ3GME 22 May '14

22 May '14

# HG changeset patch # User Marco Filippi <iz3gme.marco(a)gmail.com> # Date 1400665720 -7200 # mer mag 21 11:48:40 2014 +0200 # Node ID f217d76fadd8cb354b9e09ad69e390f6f5424e70 # Parent 25b60503531f5baea12904f8a4569652829fe76b [ic9x] Fix communication problems with Icom IC91/92 Icf file importer was registered in directory, that's useless and overwrites actual ic9x driver Fix #1649 diff --git a/chirp/ic9x_icf.py b/chirp/ic9x_icf.py --- a/chirp/ic9x_icf.py +++ b/chirp/ic9x_icf.py @@ -15,7 +15,8 @@ from chirp import chirp_common, icf, ic9x_icf_ll, util, directory, errors -(a)directory.register +# Don't register as this module is used to load icf file from File-Open menu +# see do_open in mainapp.py class IC9xICFRadio(chirp_common.CloneModeRadio): VENDOR = "Icom" MODEL = "IC-91/92AD"

1 0

[chirp_devel] Summer Project : transcoding CHIRP (into Java)
by Robert Terzi 21 May '14

21 May '14

[Attempting to move this discussion to chirp_devel] On 5/20/2014 11:06 AM, Al Szymanski wrote: > My thoughts are that by putting the entire application in Java, then > there would be no platform dependencies at all. ( wishful thinking ) I don't mean to discourage you from doing your project but to set expectations correctly: it's wishing thinking that a Java port would remove platform dependencies, especially for an application that requires serial port access. The majority of problems people run into is getting the correct operating system (Windows, Mac OX) USB driver installed for their USB serial cable. This is complicated by the whole cheap counterfeit prolific chip debacle. Even a Java application still needs the OS level device driver support to be there like any native application. So none of those problems go away. Worse, serial support in Java introduces additional complexity as additional platform specific native code, usually in the form of shared libraries (.dlls, .so's, etc.) that need to be available to the JVM. So if you want to reduce installation pain, you need to distribute those platform specific binaries with your Java app. Now when there are problems with the serial port, you've added a whole additional layer to debug which helps obfuscate the process. Note: For the people on Windows, chirp is distributed as a compiled package with all of the necessary dependencies using a python compiler. The one remaining platform dependency is getting Windows to recognize the serial cable and figuring out which port it is, which you'd still have to tackle with Java. However you will have added the additional requirement of making sure you've got a Java run time environment correctly installed that is an acceptable version for your application and the native serial port code. Doing a port of the python code to java will certainly be a valuable educational experience for you, and might lead to something that might be usable on android some day, but I don't believe you are going to solve any of the problems you are hoping to. Alternatively, if you really wanted to run on a JVM, you could look at what changes to the Python codebase (new GUI, serial interface, etc.) would be necessary to run under Jython/JPython instead of completely reimplementing everything. However, I don't know that in the end it would be that useful. Just my opinion, others will hopefully correct me where I'm wrong. --Rob

1 0

Re: [chirp_devel] How to add a new column field to the memory channel display?
by David Fannin 16 May '14

16 May '14

Thanks for the info on the extra columns - I'll try it. The "Talk Around" setting (my bad calling it TalkAbout) is on page 37 of the TH9000 manual. It's a field in the channel memory section (as is the voice compander and Reverse TX/RX settings). >From the manual: *By Talk Around function, you can directly communicate with other radios in your group in case the repeater is not activated or when you are out of range. The transceiver will transmit by RX frequency with its CTCSS/DCS signalling. * The bad grammar is directly from the manual. The options are ON and OFF. It appears to be a feature to set the radio in simplex mode using the RX freq, while continuing to use the TX Signalling coding. There is also a "Reverse TX/RX" option (per channel) that reverse the TX/RX frequencies and Signalling. ---------- Forwarded message ---------- Today's Topics: 1. Re: How to add a new column field to the memory channel display? (IZ3GME Marco) 2. Re: How to add a new column field to the memory channel display? (Ben Weiss) ---------- Forwarded message ---------- From: IZ3GME Marco <iz3gme.marco(a)gmail.com> To: chirp_devel(a)intrepid.danplanet.com Cc: Date: Fri, 16 May 2014 09:26:10 +0200 Subject: Re: [chirp_devel] How to add a new column field to the memory channel display? Hi we have no way to add field in the "main display" but there's mem.extra.append(xxxxx) which can add additional per memory fields in detail editor. For usage examples search for mem.extra.append in ft817.py or uvb5.py. I had a look at th9000 manual, I don't find references to "talkabout", if you are referring to "offset direction" found at manual page 27 column duplex is where you can specify + or - Hope this help .... 73 de IZ3GME Marco On 15/05/2014 16:47, David Fannin wrote: > Question: Can/How do you add a new column field in the memory channel > column displays? > > > I have a couple of per-channel fields that I would like to add as > columns in the memory channel display. > > These fields include “compander” (a voice processing option), and > “talkabout” (toggles between repeater and simplex mode. These fields > are settable per memory channel in the TYT TH9000 radio. > > > Is there a method to add this? Something like a add_attrib() method to > memory that would then be picked up by the Column display. > > > thanks. > > > > _______________________________________________ > ---------- Forwarded message ---------- From: Ben Weiss <kc9uum(a)gmail.com> To: chirp_devel <chirp_devel(a)intrepid.danplanet.com> Cc: Date: Fri, 16 May 2014 08:45:18 -0500 Subject: Re: [chirp_devel] How to add a new column field to the memory channel display? I would also add (as I recently came across this myself), that to access these extra settings (defined in mem.extra), you right-click on the memory, and choose "Edit". The extra settings are in there. Usually Talkabout or Talkaround is accessed with a button on the radio, for those times when it's needed. Otherwise you just program the channel as simplex (0 offset). Ben

2 1