- Developers - lists.chirpmyradio.com

Re: [chirp_devel] [PATCH] Allow specification of the hexdump address format
by chirp.cordless＠xoxy.net 18 Jul '14

18 Jul '14

On Jul 18, 2014, at 10:32 AM, Dan Smith - dsmith(a)danplanet.com wrote > This is saying nothing applied, which generally means that line endings > aren't right. I think you're using a mac, which uses \r line endings > (sometimes, not always, and I can never remember when/why). My guess > would be that you copy-and-paste'd the patch out to a file? In that > case, you've got \r endings and the code has \n. Thus, patch (or hg > import in this case) can't find any lines that match. Mac OS X is unix. Specifically, Darwin, which is derived from BSD unix and Next OS. https://en.wikipedia.org/wiki/Darwin_%28operating_system%29 See also https://en.wikipedia.org/wiki/Newline#Representations "LF: Multics, Unix and Unix-like systems (GNU/Linux, OS X, ...." As Dave Nathanson, said, "Classic MacOS" used \r, but that hasn't been the Mac OS since about 2002. All the text files native to modern Macs use \n as the line terminator. Because unix. Here's the first couple of lines of your patch, as I "saved as plain text" (not copy/paste) from Mail.app, then trimmed off the mail header in vi. (Actually vim). I don't use TextEdit for code. I've been a vi and unix user for 34 years. One of the reasons I use a Mac. This file is what I used for hg import: dan[Desktop]$ hexdump -C dsmith.patch.txt 00000000 23 20 48 47 20 63 68 61 6e 67 65 73 65 74 20 70 |# HG changeset p| 00000010 61 74 63 68 0a 23 20 55 73 65 72 20 44 61 6e 20 |atch.# User Dan | 00000020 53 6d 69 74 68 20 3c 64 73 6d 69 74 68 40 64 61 |Smith <dsmith@da| ... Note that the lines are terminated with 0a = \n. Just for grins I saved that in a file and searched for 0d = \r. No hits except embedded in the offset addresses. For comparison, here's the first few lines of the last patch I generated with hg and sent to the alias: dan[dev_work1]$ hexdump -C 1767.patch 00000000 23 20 48 47 20 63 68 61 6e 67 65 73 65 74 20 70 |# HG changeset p| 00000010 61 74 63 68 0a 23 20 55 73 65 72 20 44 61 6e 20 |atch.# User Dan | 00000020 44 72 6f 67 69 63 68 65 6e 20 3c 63 68 69 72 70 |Drogichen <chirp| Same \n termination, and you seem to have no issues (other than filename) with this. And if that's what hg generates on my Mac, you'd think it would want the same for reading. So I think the line termination issue is a red herring, unless I'm missing something. Any other ideas? Was this the correct command line, or do I need other flags/arguments? > dan[chirp.hg]$ hg import ~/Desktop/dsmith.patch.txt -dan

2 1

Re: [chirp_devel] [PATCH] Allow specification of the hexdump address format
by chirp.cordless＠xoxy.net 18 Jul '14

18 Jul '14

On Jul 18, 2014, at 7:58 AM, Dan Smith - dsmith(a)danplanet.com wrote: > # HG changeset patch > ... Sorry, I'm going to need some help here. First time doing this. I cloned a brand-new repository from d-rats.com. Saved your patch as a text file. The first line is # HG changeset patch the last line is else: Looks right to me. But I must be missing something, because I get ================ dan[chirp.hg]$ hg import ~/Desktop/dsmith.patch.txt applying /Users/dan/Desktop/dsmith.patch.txt patching file README.developers Hunk #1 FAILED at 18 Hunk #2 FAILED at 39 2 out of 2 hunks FAILED -- saving rejects to file README.developers.rej patching file chirp/util.py Hunk #1 FAILED at 14 1 out of 1 hunks FAILED -- saving rejects to file chirp/util.py.rej patching file chirpui/config.py Hunk #1 FAILED at 35 Hunk #2 FAILED at 64 2 out of 2 hunks FAILED -- saving rejects to file chirpui/config.py.rej patching file chirpui/mainapp.py Hunk #1 FAILED at 223 1 out of 1 hunks FAILED -- saving rejects to file chirpui/mainapp.py.rej abort: patch failed to apply ================ To save some back-and-forth: I'm guessing the patch works for me, but I'd like to test it. I can give some feedback on the README file by reading the raw patch: - It wouldn't be obvious to me that I can have multiple conversion specs, so an example of: "hexdump_addrfmt = %(addr)03i 0x%(addr)04x prints the address in both decimal and hex" would be useful. - The fact that %(addr)03i is the default should be stated. - The first line of the description is intended to be syntax. > +hexdump_addrfmt = %(addr)03i is not syntax, it's an example. This should be something like hexdump_addrfmt = <python format specification string> Looking for help on the patch apply. -dan

5 4

[chirp_devel] [PATCH] Allow specification of the hexdump address format
by Dan Smith 18 Jul '14

18 Jul '14

# HG changeset patch # User Dan Smith <dsmith(a)danplanet.com> # Date 1405695480 25200 # Fri Jul 18 07:58:00 2014 -0700 # Node ID 6c8e270a40b1df08aae813258355cfb929c32958 # Parent 3bab2acc2cf68e735e48138bf4871c2cd3fed85a Allow specification of the hexdump address format This allows developers to override the address format used during whole-diff (and potentially other) hexdump operations. Idea and much of the implementation borrowed from Dan Drogichen Related to #1767 diff -r 3bab2acc2cf6 -r 6c8e270a40b1 README.developers --- a/README.developers Mon Jul 14 20:10:30 2014 -0400 +++ b/README.developers Fri Jul 18 07:58:00 2014 -0700 @@ -19,6 +19,7 @@ [developer] diff_fontsize = 16 browser_fontsize = 13 +hexdump_addrfmt = %(addr)03i =================================== @@ -40,3 +41,14 @@ The default size is 10. Values less than 4, greater than 144, or not recognized as an integer will result in a log message and the default size will be used. + +======== +hexdump_addrfmt = %(addr)03i +This specifies the format of the address used during some hexdump +operations. You can specify an alternate format, such as the following +for hex: + + hexdump_addrfmt = 0x%(addr)04x + +Any of the variables in local scope of chirp/util.py::hexdump.py are +valid for substitution, including block and block_size. diff -r 3bab2acc2cf6 -r 6c8e270a40b1 chirp/util.py --- a/chirp/util.py Mon Jul 14 20:10:30 2014 -0400 +++ b/chirp/util.py Fri Jul 18 07:58:00 2014 -0700 @@ -15,34 +15,39 @@ import struct -def hexprint(data): +def hexprint(data, addrfmt=None): """Return a hexdump-like encoding of @data""" - line_sz = 8 + if addrfmt is None: + addrfmt = '%(block)03i' - lines = len(data) / line_sz + block_size = 8 + + lines = len(data) / block_size - if (len(data) % line_sz) != 0: + if (len(data) % block_size) != 0: lines += 1 - data += "\x00" * ((lines * line_sz) - len(data)) + data += "\x00" * ((lines * block_size) - len(data)) out = "" - for i in range(0, (len(data)/line_sz)): - out += "%03i: " % (i * line_sz) + for block in range(0, (len(data)/block_size)): + addr = block * block_size + out += addrfmt % locals() + out += ': ' - left = len(data) - (i * line_sz) - if left < line_sz: + left = len(data) - (block * block_size) + if left < block_size: limit = left else: - limit = line_sz + limit = block_size for j in range(0, limit): - out += "%02x " % ord(data[(i * line_sz) + j]) + out += "%02x " % ord(data[(block * block_size) + j]) out += " " for j in range(0, limit): - char = data[(i * line_sz) + j] + char = data[(block * block_size) + j] if ord(char) > 0x20 and ord(char) < 0x7E: out += "%s" % char diff -r 3bab2acc2cf6 -r 6c8e270a40b1 chirpui/config.py --- a/chirpui/config.py Mon Jul 14 20:10:30 2014 -0400 +++ b/chirpui/config.py Fri Jul 18 07:58:00 2014 -0700 @@ -36,14 +36,15 @@ self.__config.write(cfg_file) cfg_file.close() - def get(self, key, section): + def get(self, key, section, raw=False): if not self.__config.has_section(section): return None if not self.__config.has_option(section, key): return None - return self.__config.get(section, key) + print "Calling get %s with raw=%s" %(key, raw) + return self.__config.get(section, key, raw=raw) def set(self, key, value, section): if not self.__config.has_section(section): @@ -65,8 +66,9 @@ self._config = config self._section = section - def get(self, key, section=None): - return self._config.get(key, section or self._section) + def get(self, key, section=None, raw=False): + return self._config.get(key, section or self._section, + raw=raw) def set(self, key, value, section=None): return self._config.set(key, value, section or self._section) diff -r 3bab2acc2cf6 -r 6c8e270a40b1 chirpui/mainapp.py --- a/chirpui/mainapp.py Mon Jul 14 20:10:30 2014 -0400 +++ b/chirpui/mainapp.py Fri Jul 18 07:58:00 2014 -0700 @@ -224,8 +224,15 @@ elif isinstance(eset_a.rthread.radio, chirp_common.CloneModeRadio) and\ isinstance(eset_b.rthread.radio, chirp_common.CloneModeRadio): # Diff whole (can do this without a job, since both are clone-mode) - a = util.hexprint(eset_a.rthread.radio._mmap.get_packed()) - b = util.hexprint(eset_b.rthread.radio._mmap.get_packed()) + try: + addrfmt = CONF.get('hexdump_addrfmt', section='developer', + raw=True) + except: + pass + a = util.hexprint(eset_a.rthread.radio._mmap.get_packed(), + addrfmt=addrfmt) + b = util.hexprint(eset_b.rthread.radio._mmap.get_packed(), + addrfmt=addrfmt) if sel_chan_a == -2: diffsonly = True else:

1 0

Re: [chirp_devel] [developer] Control address format for full-file dump/diff - #1767
by chirp.cordless＠xoxy.net 17 Jul '14

17 Jul '14

I appreciate the explanation of how to possibly work around the initial problem, but my proposed solution is less work, less code, tested, just as flexible wrt to controlling the format, and results IMO in a friendlier and more robust interface. Did you have some reason for not liking that direction? -dan On Jul 17, 2014, at 8:05 PM, Dan Smith - dsmith(a)danplanet.com wrote: > ConfigParser is trying to interpolate those as other configuration > variables. You need to pass raw=True to the get() operation. The > wrapping around ConfigParser makes that a little tough. Apply this > (untested change) to your tree and then pass raw=True in the get call > and see if that solves the problem. If so, then you can just include > this in your patch: > > --- a/chirpui/config.py Mon Jul 14 20:10:30 2014 -0400 > +++ b/chirpui/config.py Thu Jul 17 20:04:23 2014 -0700 > @@ -36,14 +36,14 @@ > self.__config.write(cfg_file) > cfg_file.close() > > - def get(self, key, section): > + def get(self, key, section, raw=False): > if not self.__config.has_section(section): > return None > > if not self.__config.has_option(section, key): > return None > > - return self.__config.get(section, key) > + return self.__config.get(section, key, raw=raw) > > def set(self, key, value, section): > if not self.__config.has_section(section): > @@ -65,8 +65,9 @@ > self._config = config > self._section = section > > - def get(self, key, section=None): > - return self._config.get(key, section or self._section) > + def get(self, key, section=None, raw=False): > + return self._config.get(key, section or self._section, > + raw=False) > > def set(self, key, value, section=None): > return self._config.set(key, value, section or self._section) > > --Dan

2 1

Re: [chirp_devel] [developer] Control address format for full-file dump/diff - #1767
by chirp.cordless＠xoxy.net 17 Jul '14

17 Jul '14

On Jul 15, 2014, at 6:26 PM, Dan Smith - dsmith(a)danplanet.com wrote: >> The second thing is that my own preferred format is "both" >> which sort of breaks your model: >>>> out + "%04i x%04X: " % ((i * line_sz), (i * line_sz)) > > I think you could do this: > > result fmt % locals() > > and then I could make a format like this to get what you want: > > "%(line_sz)04i %(line_sz)04X" > > Should be less code than what you have now and more flexible I think. > Just catch ValueError, TypeError, and KeyError and you should be safe > for error handling I think. > > --Dan I hadn't seen that form of string formatting before, and it makes this flexible approach much more reasonable. However, it doesn't _quite_ work because the config read seems to object to the "(name)" embedded in the format. Stack trace at the end if you're curious. I tried several forms of quoting and escaping without success. But I've got a variant that does work, and I'm happier with it because it presents fewer ways for the user to do something strange. The core of it is a config variable of the form hexdump_addrfmt = %04i x%04X and this code: addrfmt = addrfmt.replace ("%", "%(addr)") ... out += addrfmt % { "addr" : i * line_sz } So far the only exceptions I've been able to throw are OverflowError for %c, and ValueError for %Q. Catching Overflow and replacing with %03i causes a very strange display, but a display results. All the integer formats, as well as %s, %r, and even %E all do something reasonable. Shall I submit a patch based on this approach? -dan ===================================== Traceback (most recent call last): File "/Users/dan/chirpwork/dev_work/chirp.hg/chirpui/mainapp.py", line 1418, in mh self.do_diff_radio() File "/Users/dan/chirpwork/dev_work/chirp.hg/chirpui/mainapp.py", line 227, in do_diff_radio a = util.hexprint(eset_a.rthread.radio._mmap.get_packed()) File "/Users/dan/chirpwork/dev_work/chirp.hg/chirp/util.py", line 35, in hexprint addrfmt = CONF.get("hexdump_addrfmt", "developer") File "/Users/dan/chirpwork/dev_work/chirp.hg/chirpui/config.py", line 69, in get return self._config.get(key, section or self._section) File "/Users/dan/chirpwork/dev_work/chirp.hg/chirpui/config.py", line 46, in get return self.__config.get(section, key) File "/opt/kk7ds/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/ConfigParser.py", line 615, in get return self._interpolate(section, option, value, d) File "/opt/kk7ds/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/ConfigParser.py", line 661, in _interpolate option, section, rawval, e.args[0]) ConfigParser.InterpolationMissingOptionError: Bad value substitution: section: [developer] option : hexdump_addrfmt key : addr rawval : %(addr)04i x%(addr)04X =====================================

2 1

[chirp_devel] Build test results: Successful
by Build System 16 Jul '14

16 Jul '14

Tested changes: [Jim Unroe <rock.unroe(a)gmail.com>] [F8HP] Add Support for Baofeng F8HP with Custom Firmware Except for the firmware, this radio is nearly identical to the Intek KT-980HP Add BASETYPE and BASETYPE_LIST support Rework code so that KT-980HP settings are also used for BF-F8HP Update logic for powerlevels to use "==" intead of "!=" to be consistent with other similar settings Add code to DTMF Speed settings to prevent errors with out-of-range values Add subclass for Baofeng BF-F8HP #1765 Full log: [...truncated 26 lines...] test_type_u24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u8 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_char (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string_invalid_chars (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string_wrong_length (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_comment_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok test_comment_inline_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok test_missing_semicolon (tests.unit.test_bitwise.TestBitwiseErrors) ... ok test_seek (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_seekto (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_struct_one_element (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_two_elements (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_writes (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok split_tone_encode_test_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_none (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_none (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_fix_rounded_step_250 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_500 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_750 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_12_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_2_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_5_0 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_6_25 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_fractional_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step_fail (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_format_freq (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_bad (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_decimal (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whitespace (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whole (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_ensure_has_calls_almost_full (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_empty (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_partial (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full1 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full2 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_urcall_full (tests.unit.test_import_logic.DstarTests) ... ok test_import_bank (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffA_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffB_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_negative (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_too_big_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_uhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_errors (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_warnings (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_invalid (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_am (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_fm (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_name (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_closest (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_dst (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_src (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_same (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffA_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffB_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModelIndexInterface) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_icom_bank (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_index_bounds (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_next_mapping_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_auto_tone_mode_cross (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_pol (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_rx (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tone (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tsql (tests.unit.test_memedit_edits.TestEdits) ... ok test_init (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_bad_portnames (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_sorted (tests.unit.test_platform.Win32PlatformTest) ... ok test_apply_callback (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_group (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_multi (tests.unit.test_settings.TestSettingContainers) ... ok test_changed (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_boolean (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_float (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_integer (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_list (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_string (tests.unit.test_settings.TestSettingValues) ... ok test_validate_callback (tests.unit.test_settings.TestSettingValues) ... ok test_delete_hole_with_all (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_all_full (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_without_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_with_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_without_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok ---------------------------------------------------------------------- Ran 151 tests in 0.070s OK Registered Icom_IC-2820H = IC2820Radio Registered TYT_TH-UVF8D = TYTUVF8DRadio Registered AnyTone_5888UV = AnyTone5888UVRadio Registered Intek_HR-2040 = IntekHR2040Radio Registered Polmar_DB-50M = PolmarDB50MRadio Registered Powerwerx_DB-750X = PowerwerxDB750XRadio Registered Icom_IC-2200H = IC2200Radio Registered Yaesu_FT-2800M = FT2800Radio Registered Yaesu_VX-3 = VX3Radio Registered Icom_IC-2100H = IC2100Radio Registered Yaesu_FTM-350 = FTM350Radio Registered Icom_IC-V82_U82 = ICx8xRadio Registered Yaesu_VX-6 = VX6Radio Registered Yaesu_VX-5 = VX5Radio Registered Yaesu_FT-60 = FT60Radio Registered Yaesu_VX-7 = VX7Radio Registered Baofeng_UV-5R = BaofengUV5R Registered Baofeng_F-11 = BaofengF11Radio Registered Baofeng_UV-82 = BaofengUV82Radio Registered Baofeng_UV-6 = BaofengUV6Radio Registered Intek_KT-980HP = IntekKT980Radio Registered Baofeng_BF-F8HP = BaofengBFF8HPRadio Registered Yaesu_FT-1802M = FT1802Radio Registered Kenwood_TK-7102 = KenwoodTK7102Radio Registered Kenwood_TK-8102 = KenwoodTK8102Radio Registered Kenwood_TK-7108 = KenwoodTK7108Radio Registered Kenwood_TK-8108 = KenwoodTK8108Radio Registered Icom_ID-31A = ID31Radio Registered Icom_ID-51A = ID51Radio Registered Icom_IC-2720H = IC2720Radio Registered Icom_IC-T8A = ICT8ARadio Registered Wouxun_KG-UVD1P = KGUVD1PRadio Registered Wouxun_KG-UV6 = KGUV6DRadio Registered Wouxun_KG-816 = KG816Radio Registered Wouxun_KG-818 = KG818Radio Registered TYT_TH-UVF1 = TYTTHUVF1Radio Registered Yaesu_FT-90 = FT90Radio Registered Generic_CSV = CSVRadio Registered Commander_KG-UV = CommanderCSVRadio Registered RT_Systems_CSV = RTCSVRadio Registered Kenwood_ITM = ITMRadio Registered Alinco_DR03T = DR03Radio Registered Alinco_DR06T = DR06Radio Registered Alinco_DR135T = DR135Radio Registered Alinco_DR235T = DR235Radio Registered Alinco_DR435T = DR435Radio Registered Alinco_DJ596 = DJ596Radio Registered Jetstream_JT220M = JT220MRadio Registered Alinco_DJ175 = DJ175Radio Registered Kenwood_TH-D7 = THD7Radio Registered Kenwood_TH-D7G = THD7GRadio Registered Kenwood_TM-D700 = TMD700Radio Registered Kenwood_TM-V7 = TMV7Radio Registered Kenwood_TM-G707 = TMG707Radio Registered Kenwood_TH-G71 = THG71Radio Registered Kenwood_TH-F6 = THF6ARadio Registered Kenwood_TH-F7 = THF7ERadio Registered Kenwood_TM-D710 = TMD710Radio Registered Kenwood_TH-D72_live_mode = THD72Radio Registered Kenwood_TM-V71 = TMV71Radio Registered Kenwood_TH-K2 = THK2Radio Registered Kenwood_TM-271 = TM271Radio Registered Kenwood_TM-281 = TM281Radio Registered Kenwood_TM-471 = TM471Radio Registered Yaesu_VX-8_R = VX8Radio Registered Yaesu_VX-8_DR = VX8DRadio Registered Yaesu_VX-8_GE = VX8GERadio Registered Icom_IC-T7H = ICT7HRadio Registered Icom_IC-Q7A = ICQ7Radio Registered Baofeng_UV-B5 = BaofengUVB5 Registered Generic_XML = XMLRadio Registered Kenwood_HMK = HMKRadio Registered Kenwood_TH-D72_clone_mode = THD72Radio Registered Icom_IC-91_92AD = IC9xRadio Registered Icom_IC-T70 = ICT70Radio Registered Icom_IC-208H = IC208Radio Registered Icom_ID-800H_v2 = ID800v2Radio Registered Icom_7200 = Icom7200Radio Registered Icom_7000 = Icom7000Radio Registered Icom_746 = Icom746Radio Registered ARRL_Travel_Plus = TpeRadio Registered Vertex_Standard_VXA-700 = VXA700Radio Registered Icom_IC-W32A = ICW32ARadio Registered Baofeng_UV-3R = UV3RRadio Registered Yaesu_VX-2 = VX2Radio Registered Puxing_PX-777 = Puxing777Radio Registered Puxing_PX-2R = Puxing2RRadio Registered Baojie_BJ-UV55 = BaojieBJUV55Radio Registered Baofeng_BF-888 = H777Radio Registered Yaesu_FT-7800_7900 = FT7800Radio Registered Yaesu_FT-8800 = FT8800Radio Registered Yaesu_FT-8900 = FT8900Radio Registered KYD_NC-630A = NC630aRadio Registered Yaesu_FT-817 = FT817Radio Registered Yaesu_FT-817ND = FT817NDRadio Registered Yaesu_FT-817ND_US = FT817NDUSRadio Registered Yaesu_FT-857_897 = FT857Radio Registered Yaesu_FT-857_897_US = FT857USRadio Registered Yaesu_VX-170 = VX170Radio Registered Icom_ID-880H = ID880Radio Registered Icom_ID-80H = ID80Radio Registered TYT_TH-UV3R = TYTUV3RRadio Alinco DJ175 Detect PASSED: All tests Alinco DJ175 CopyAll PASSED: All tests Alinco DJ175 Clone PASSED: All tests Alinco DJ175 BruteForce PASSED: All tests Alinco DJ175 Edges PASSED: All tests Alinco DJ175 Banks SKIPPED: Banks not supported Alinco DJ596 Detect PASSED: All tests Alinco DJ596 CopyAll PASSED: All tests Alinco DJ596 Clone PASSED: All tests Alinco DJ596 BruteForce PASSED: All tests Alinco DJ596 Edges PASSED: All tests Alinco DJ596 Banks SKIPPED: Banks not supported Alinco DR235T Detect PASSED: All tests Alinco DR235T CopyAll PASSED: All tests Alinco DR235T Clone PASSED: All tests Alinco DR235T BruteForce PASSED: All tests Alinco DR235T Edges PASSED: All tests Alinco DR235T Banks SKIPPED: Banks not supported Baofeng BF-888 Detect PASSED: All tests Baofeng BF-888 CopyAll PASSED: All tests Baofeng BF-888 Clone PASSED: All tests Baofeng BF-888 BruteForce PASSED: All tests Baofeng BF-888 Edges PASSED: All tests Baofeng BF-888 Banks SKIPPED: Banks not supported Baofeng F-11 Detect PASSED: All tests Baofeng F-11 CopyAll PASSED: All tests Baofeng F-11 Clone PASSED: All tests Baofeng F-11 BruteForce PASSED: All tests Baofeng F-11 Edges PASSED: All tests Baofeng F-11 Banks SKIPPED: Banks not supported Baofeng UV-3R Detect PASSED: All tests Baofeng UV-3R CopyAll PASSED: All tests Baofeng UV-3R Clone PASSED: All tests Baofeng UV-3R BruteForce PASSED: All tests Baofeng UV-3R Edges PASSED: All tests Baofeng UV-3R Banks SKIPPED: Banks not supported Baofeng UV-5R Detect PASSED: All tests Baofeng UV-5R CopyAll PASSED: All tests Baofeng UV-5R Clone PASSED: All tests Baofeng UV-5R BruteForce PASSED: All tests Baofeng UV-5R Edges PASSED: All tests Baofeng UV-5R Banks SKIPPED: Banks not supported Baofeng UV-B5 Detect PASSED: All tests Baofeng UV-B5 CopyAll PASSED: All tests Baofeng UV-B5 Clone PASSED: All tests Baofeng UV-B5 BruteForce PASSED: All tests Baofeng UV-B5 Edges PASSED: All tests Baofeng UV-B5 Banks SKIPPED: Banks not supported Icom IC-208H Detect PASSED: All tests Icom IC-208H CopyAll PASSED: All tests Icom IC-208H Clone PASSED: All tests Icom IC-208H BruteForce PASSED: All tests Icom IC-208H Edges PASSED: All tests Icom IC-208H Banks PASSED: All tests Icom IC-2100H Detect PASSED: All tests Icom IC-2100H CopyAll PASSED: All tests Icom IC-2100H Clone PASSED: All tests Icom IC-2100H BruteForce PASSED: All tests Icom IC-2100H Edges PASSED: All tests Icom IC-2100H Banks SKIPPED: Banks not supported Icom IC-2200H Detect PASSED: All tests Icom IC-2200H CopyAll PASSED: All tests Icom IC-2200H Clone PASSED: All tests Icom IC-2200H BruteForce PASSED: All tests Icom IC-2200H Edges PASSED: All tests Icom IC-2200H Banks PASSED: All tests Icom IC-2720H Detect PASSED: All tests Icom IC-2720H CopyAll PASSED: All tests Icom IC-2720H Clone PASSED: All tests Icom IC-2720H BruteForce PASSED: All tests Icom IC-2720H Edges PASSED: All tests Icom IC-2720H Banks PASSED: All tests Icom IC-2820H Detect PASSED: All tests Icom IC-2820H CopyAll PASSED: All tests Icom IC-2820H Clone PASSED: All tests Icom IC-2820H BruteForce PASSED: All tests Icom IC-2820H Edges PASSED: All tests Icom IC-2820H Banks PASSED: All tests Icom IC-Q7A Detect PASSED: All tests Icom IC-Q7A CopyAll PASSED: All tests Icom IC-Q7A Clone PASSED: All tests Icom IC-Q7A BruteForce PASSED: All tests Icom IC-Q7A Edges PASSED: All tests Icom IC-Q7A Banks SKIPPED: Banks not supported Icom IC-T70 Detect PASSED: All tests Icom IC-T70 CopyAll PASSED: All tests Icom IC-T70 Clone PASSED: All tests Icom IC-T70 BruteForce PASSED: All tests Icom IC-T70 Edges PASSED: All tests Icom IC-T70 Banks PASSED: All tests Icom IC-T7H Detect PASSED: All tests Icom IC-T7H CopyAll PASSED: All tests Icom IC-T7H Clone PASSED: All tests Icom IC-T7H BruteForce PASSED: All tests Icom IC-T7H Edges PASSED: All tests Icom IC-T7H Banks SKIPPED: Banks not supported Icom IC-T8A Detect PASSED: All tests Icom IC-T8A CopyAll PASSED: All tests Icom IC-T8A Clone PASSED: All tests Icom IC-T8A BruteForce PASSED: All tests Icom IC-T8A Edges PASSED: All tests Icom IC-T8A Banks SKIPPED: Banks not supported Icom IC-V82/U82 Detect PASSED: All tests Icom IC-V82/U82 CopyAll PASSED: All tests Icom IC-V82/U82 Clone PASSED: All tests Icom IC-V82/U82 BruteForce PASSED: All tests Icom IC-V82/U82 Edges PASSED: All tests Icom IC-V82/U82 Banks PASSED: All tests Icom IC-W32A VHF Detect PASSED: All tests Icom IC-W32A VHF CopyAll PASSED: All tests Icom IC-W32A VHF Clone PASSED: All tests Icom IC-W32A VHF BruteForce PASSED: All tests Icom IC-W32A VHF Edges PASSED: All tests Icom IC-W32A VHF Banks SKIPPED: Banks not supported Icom IC-W32A UHF Detect PASSED: All tests Icom IC-W32A UHF CopyAll PASSED: All tests Icom IC-W32A UHF Clone PASSED: All tests Icom IC-W32A UHF BruteForce PASSED: All tests Icom IC-W32A UHF Edges PASSED: All tests Icom IC-W32A UHF Banks SKIPPED: Banks not supported Icom ID-31A Detect PASSED: All tests Icom ID-31A CopyAll PASSED: All tests Icom ID-31A Clone PASSED: All tests Icom ID-31A BruteForce PASSED: All tests Icom ID-31A Edges PASSED: All tests Icom ID-31A Banks PASSED: All tests Icom ID-51A Detect PASSED: All tests Icom ID-51A CopyAll PASSED: All tests Icom ID-51A Clone PASSED: All tests Icom ID-51A BruteForce PASSED: All tests Icom ID-51A Edges PASSED: All tests Icom ID-51A Banks PASSED: All tests Icom ID-800H v2 Detect PASSED: All tests Icom ID-800H v2 CopyAll PASSED: All tests Icom ID-800H v2 Clone PASSED: All tests Icom ID-800H v2 BruteForce PASSED: All tests Icom ID-800H v2 Edges PASSED: All tests Icom ID-800H v2 Banks PASSED: All tests Icom ID-880H Detect PASSED: All tests Icom ID-880H CopyAll PASSED: All tests Icom ID-880H Clone PASSED: All tests Icom ID-880H BruteForce PASSED: All tests Icom ID-880H Edges PASSED: All tests Icom ID-880H Banks PASSED: All tests Jetstream JT220M Detect PASSED: All tests Jetstream JT220M CopyAll PASSED: All tests Jetstream JT220M Clone PASSED: All tests Jetstream JT220M BruteForce PASSED: All tests Jetstream JT220M Edges PASSED: All tests Jetstream JT220M Banks SKIPPED: Banks not supported Kenwood TH-D72 (clone Detect PASSED: All tests Kenwood TH-D72 (clone CopyAll PASSED: All tests Kenwood TH-D72 (clone Clone PASSED: All tests Kenwood TH-D72 (clone BruteForce PASSED: All tests Kenwood TH-D72 (clone Edges PASSED: All tests Kenwood TH-D72 (clone Banks SKIPPED: Banks not supported Kenwood TK-8102 Detect PASSED: All tests Kenwood TK-8102 CopyAll PASSED: All tests Kenwood TK-8102 Clone PASSED: All tests Kenwood TK-8102 BruteForce PASSED: All tests Kenwood TK-8102 Edges PASSED: All tests Kenwood TK-8102 Banks SKIPPED: Banks not supported Polmar DB-50M Detect PASSED: All tests Polmar DB-50M CopyAll PASSED: All tests Polmar DB-50M Clone PASSED: All tests Polmar DB-50M BruteForce PASSED: All tests Polmar DB-50M Edges PASSED: All tests Polmar DB-50M Banks SKIPPED: Banks not supported Puxing PX-2R Detect PASSED: All tests Puxing PX-2R CopyAll PASSED: All tests Puxing PX-2R Clone PASSED: All tests Puxing PX-2R BruteForce PASSED: All tests Puxing PX-2R Edges PASSED: All tests Puxing PX-2R Banks SKIPPED: Banks not supported Puxing PX-777 Detect PASSED: All tests Puxing PX-777 CopyAll PASSED: All tests Puxing PX-777 Clone PASSED: All tests Puxing PX-777 BruteForce PASSED: All tests Puxing PX-777 Edges PASSED: All tests Puxing PX-777 Banks SKIPPED: Banks not supported TYT TH-UV3R Detect PASSED: All tests TYT TH-UV3R CopyAll PASSED: All tests TYT TH-UV3R Clone PASSED: All tests TYT TH-UV3R BruteForce PASSED: All tests TYT TH-UV3R Edges PASSED: All tests TYT TH-UV3R Banks SKIPPED: Banks not supported TYT TH-UVF1 Detect PASSED: All tests TYT TH-UVF1 CopyAll PASSED: All tests TYT TH-UVF1 Clone PASSED: All tests TYT TH-UVF1 BruteForce PASSED: All tests TYT TH-UVF1 Edges PASSED: All tests TYT TH-UVF1 Banks SKIPPED: Banks not supported Vertex VXA-700 Detect PASSED: All tests Vertex VXA-700 CopyAll PASSED: All tests Vertex VXA-700 Clone PASSED: All tests Vertex VXA-700 BruteForce PASSED: All tests Vertex VXA-700 Edges PASSED: All tests Vertex VXA-700 Banks SKIPPED: Banks not supported Wouxun KG-816 Detect PASSED: All tests Wouxun KG-816 CopyAll PASSED: All tests Wouxun KG-816 Clone PASSED: All tests Wouxun KG-816 BruteForce PASSED: All tests Wouxun KG-816 Edges PASSED: All tests Wouxun KG-816 Banks SKIPPED: Banks not supported Wouxun KG-818 Detect PASSED: All tests Wouxun KG-818 CopyAll PASSED: All tests Wouxun KG-818 Clone PASSED: All tests Wouxun KG-818 BruteForce PASSED: All tests Wouxun KG-818 Edges PASSED: All tests Wouxun KG-818 Banks SKIPPED: Banks not supported Wouxun KG-UV6 Detect PASSED: All tests Wouxun KG-UV6 CopyAll PASSED: All tests Wouxun KG-UV6 Clone PASSED: All tests Wouxun KG-UV6 BruteForce PASSED: All tests Wouxun KG-UV6 Edges PASSED: All tests Wouxun KG-UV6 Banks SKIPPED: Banks not supported Wouxun KG-UVD1P Detect PASSED: All tests Wouxun KG-UVD1P CopyAll PASSED: All tests Wouxun KG-UVD1P Clone PASSED: All tests Wouxun KG-UVD1P BruteForce PASSED: All tests Wouxun KG-UVD1P Edges PASSED: All tests Wouxun KG-UVD1P Banks SKIPPED: Banks not supported Yaesu FT-1802M Detect PASSED: All tests Yaesu FT-1802M CopyAll PASSED: All tests Yaesu FT-1802M Clone PASSED: All tests Yaesu FT-1802M BruteForce PASSED: All tests Yaesu FT-1802M Edges PASSED: All tests Yaesu FT-1802M Banks SKIPPED: Banks not supported Yaesu FT-2800M Detect PASSED: All tests Yaesu FT-2800M CopyAll PASSED: All tests Yaesu FT-2800M Clone PASSED: All tests Yaesu FT-2800M BruteForce PASSED: All tests Yaesu FT-2800M Edges PASSED: All tests Yaesu FT-2800M Banks SKIPPED: Banks not supported Yaesu FT-60 Detect PASSED: All tests Yaesu FT-60 CopyAll PASSED: All tests Yaesu FT-60 Clone PASSED: All tests Yaesu FT-60 BruteForce PASSED: All tests Yaesu FT-60 Edges PASSED: All tests Yaesu FT-60 Banks SKIPPED: Banks not supported Yaesu FT-7800/7900 Detect PASSED: All tests Yaesu FT-7800/7900 CopyAll PASSED: All tests Yaesu FT-7800/7900 Clone PASSED: All tests Yaesu FT-7800/7900 BruteForce PASSED: All tests Yaesu FT-7800/7900 Edges PASSED: All tests Yaesu FT-7800/7900 Banks PASSED: All tests Yaesu FT-817 Detect PASSED: All tests Yaesu FT-817 CopyAll PASSED: All tests Yaesu FT-817 Clone PASSED: All tests Yaesu FT-817 BruteForce PASSED: All tests Yaesu FT-817 Edges PASSED: All tests Yaesu FT-817 Banks SKIPPED: Banks not supported Yaesu FT-817ND Detect PASSED: All tests Yaesu FT-817ND CopyAll PASSED: All tests Yaesu FT-817ND Clone PASSED: All tests Yaesu FT-817ND BruteForce PASSED: All tests Yaesu FT-817ND Edges PASSED: All tests Yaesu FT-817ND Banks SKIPPED: Banks not supported Yaesu FT-817ND (US) Detect PASSED: All tests Yaesu FT-817ND (US) CopyAll PASSED: All tests Yaesu FT-817ND (US) Clone PASSED: All tests Yaesu FT-817ND (US) BruteForce PASSED: All tests Yaesu FT-817ND (US) Edges PASSED: All tests Yaesu FT-817ND (US) Banks SKIPPED: Banks not supported Yaesu FT-857/897 Detect PASSED: All tests Yaesu FT-857/897 CopyAll PASSED: All tests Yaesu FT-857/897 Clone PASSED: All tests Yaesu FT-857/897 BruteForce PASSED: All tests Yaesu FT-857/897 Edges PASSED: All tests Yaesu FT-857/897 Banks SKIPPED: Banks not supported Yaesu FT-857/897 (U Detect PASSED: All tests Yaesu FT-857/897 (U CopyAll PASSED: All tests Yaesu FT-857/897 (U Clone PASSED: All tests Yaesu FT-857/897 (U BruteForce PASSED: All tests Yaesu FT-857/897 (U Edges PASSED: All tests Yaesu FT-857/897 (U Banks SKIPPED: Banks not supported Yaesu FT-8800 Left Detect PASSED: All tests Yaesu FT-8800 Left CopyAll PASSED: All tests Yaesu FT-8800 Left Clone PASSED: All tests Yaesu FT-8800 Left BruteForce PASSED: All tests Yaesu FT-8800 Left Edges PASSED: All tests Yaesu FT-8800 Left Banks PASSED: All tests Yaesu FT-8800 Right Detect PASSED: All tests Yaesu FT-8800 Right CopyAll PASSED: All tests Yaesu FT-8800 Right Clone PASSED: All tests Yaesu FT-8800 Right BruteForce PASSED: All tests Yaesu FT-8800 Right Edges PASSED: All tests Yaesu FT-8800 Right Banks PASSED: All tests Yaesu FT-8900 Detect PASSED: All tests Yaesu FT-8900 CopyAll PASSED: All tests Yaesu FT-8900 Clone PASSED: All tests Yaesu FT-8900 BruteForce PASSED: All tests Yaesu FT-8900 Edges PASSED: All tests Yaesu FT-8900 Banks SKIPPED: Banks not supported Yaesu FTM-350 Left Detect PASSED: All tests Yaesu FTM-350 Left CopyAll PASSED: All tests Yaesu FTM-350 Left Clone PASSED: All tests Yaesu FTM-350 Left BruteForce PASSED: All tests Yaesu FTM-350 Left Edges PASSED: All tests Yaesu FTM-350 Left Banks SKIPPED: Banks not supported Yaesu FTM-350 Right Detect PASSED: All tests Yaesu FTM-350 Right CopyAll PASSED: All tests Yaesu FTM-350 Right Clone PASSED: All tests Yaesu FTM-350 Right BruteForce PASSED: All tests Yaesu FTM-350 Right Edges PASSED: All tests Yaesu FTM-350 Right Banks SKIPPED: Banks not supported Yaesu VX-2 Detect PASSED: All tests Yaesu VX-2 CopyAll PASSED: All tests Yaesu VX-2 Clone PASSED: All tests Yaesu VX-2 BruteForce PASSED: All tests Yaesu VX-2 Edges PASSED: All tests Yaesu VX-2 Banks PASSED: All tests Yaesu VX-3 Detect PASSED: All tests Yaesu VX-3 CopyAll PASSED: All tests Yaesu VX-3 Clone PASSED: All tests Yaesu VX-3 BruteForce PASSED: All tests Yaesu VX-3 Edges PASSED: All tests Yaesu VX-3 Banks PASSED: All tests Yaesu VX-5 Detect PASSED: All tests Yaesu VX-5 CopyAll PASSED: All tests Yaesu VX-5 Clone PASSED: All tests Yaesu VX-5 BruteForce PASSED: All tests Yaesu VX-5 Edges PASSED: All tests Yaesu VX-5 Banks PASSED: All tests Yaesu VX-6 Detect PASSED: All tests Yaesu VX-6 CopyAll PASSED: All tests Yaesu VX-6 Clone PASSED: All tests Yaesu VX-6 BruteForce PASSED: All tests Yaesu VX-6 Edges PASSED: All tests Yaesu VX-6 Banks PASSED: All tests Yaesu VX-7 Detect PASSED: All tests Yaesu VX-7 CopyAll PASSED: All tests Yaesu VX-7 Clone PASSED: All tests Yaesu VX-7 BruteForce PASSED: All tests Yaesu VX-7 Edges PASSED: All tests Yaesu VX-7 Banks PASSED: All tests Yaesu VX-8 R Detect PASSED: All tests Yaesu VX-8 R CopyAll PASSED: All tests Yaesu VX-8 R Clone PASSED: All tests Yaesu VX-8 R BruteForce PASSED: All tests Yaesu VX-8 R Edges PASSED: All tests Yaesu VX-8 R Banks PASSED: All tests ---------------------------------------------------------------------- Results: TOTAL : 342 FAILED : 0 SKIPPED: 38 PASSED : 304 CRASHED: 0 Patch 'tip' is OK ================================================ Tests OK Email was triggered for: Success Sending email for trigger: Success

1 0

Re: [chirp_devel] [developer] Control address format for full-file dump/diff - #1767
by chirp.cordless＠xoxy.net 15 Jul '14

15 Jul '14

Well, I can see why a Python aficionado would like that. 8-) My first reaction is concern for error handling, it seems like it would be pretty easy to specify something with too few or two many arguments. Yeah, the audience is developers and they can probably sort out the exception, but it seems like buying trouble. The second thing is that my own preferred format is "both" which sort of breaks your model: >> out += "%04i x%04X: " % ((i * line_sz), (i * line_sz)) This requires the statement to have two (identical) address arguments in a list. Handling that would require scanning the supplied format, and while I'm sure it's computable, it's more work than I'm interested in, and this flexibility doesn't get me very excited. If you're OK with letting the user deal with whatever exception they might cause, I could see handling the case of "not decimal or hex or both" by assuming one address argument and just pasting whatever the user supplies for the format. It doesn't solve any problem I have, but I think it's minimal work and I could do that. I.e. Eliminate this: >> + elif (addrfmt != "decimal" and addrfmt != "hex" and addrfmt != "both"): >> + print "Invalid hexdump_addrfmt value %s. Using decimal." % addrfmt >> + addrfmt = "decimal" and change the print statements to: > ... >> + elif addrfmt == "both": >> + out += "%04i x%04X: " % ((i * line_sz), (i * line_sz)) >> + elif addrfmt == "decimal": >> + out += "%04i: " % (i * line_sz) else out += addrfmt % (i * line_sz) Thoughts? -dan On Jul 15, 2014, at 5:30 PM, Dan Smith - dsmith(a)danplanet.com wrote: >> + >> + try: >> + addrfmt = CONF.get("hexdump_addrfmt", "developer") >> + except Exception: >> + addrfmt = "decimal" >> + if addrfmt == None: >> + addrfmt = "decimal" >> + elif (addrfmt != "decimal" and addrfmt != "hex" and addrfmt != "both"): >> + print "Invalid hexdump_addrfmt value %s. Using decimal." % addrfmt >> + addrfmt = "decimal" >> >> for i in range(0, (len(data)/line_sz)): >> - out += "%03i: " % (i * line_sz) >> + if addrfmt == "hex": >> + out += "x%04X: " % (i * line_sz) >> + elif addrfmt == "both": >> + out += "%04i x%04X: " % ((i * line_sz), (i * line_sz)) >> + else: >> + out += "%04i: " % (i * line_sz) > > Just a thought... > > Instead of having them choose from a few different symbolic choices, why > not just let them specify the format themselves? So in the config: > > hexdump_addrfmt = %0000x > > and in the code: > > fmt = CONF.get("hexdump_addrfmt", "developer") > . . . > thing = fmt % addr > > I can just see someone coming along and wanting octal or something and > if we just let them specify the format, we can avoid adding new symbols. > What do you think? > > --Dan

2 1

Re: [chirp_devel] [developer] Add info re: hex dump modes to "Diff Radios" dialog - #1753
by chirp.cordless＠xoxy.net 15 Jul '14

15 Jul '14

(*blush*). Thanks for noticing the misspelling. Respun patch attached. -dan On Jul 12, 2014, at 7:27 PM, Dan Smith - dsmith(a)danplanet.com wrote: >> + label.set_markup("-1 for either Mem # does a hex dump with " + >> + "diffs higlighted.\n" + >> + "-2 for first Mem # shows only the diffs.") > > "highlighted" is misspelled. Also, can you mention "full file" in there > somewhere? Otherwise I don't think it's clear that -1 or -2 diff the > whole file instead of a single memory. > > Thanks! > > --Dan

2 2

[chirp_devel] [PATCH] [F8HP] Add Support for Baofeng F8HP with Custom Firmware
by Jim Unroe 14 Jul '14

14 Jul '14

# HG changeset patch # User Jim Unroe <rock.unroe(a)gmail.com> # Date 1405383030 14400 # Node ID 2df0e46fe981e46c85213cbd7847d4628e378d11 # Parent fa902fc78810dae3a383a025c710eb575145fa1c [F8HP] Add Support for Baofeng F8HP with Custom Firmware Except for the firmware, this radio is nearly identical to the Intek KT-980HP Add BASETYPE and BASETYPE_LIST support Rework code so that KT-980HP settings are also used for BF-F8HP Update logic for powerlevels to use "==" intead of "!=" to be consistent with other similar settings Add code to DTMF Speed settings to prevent errors with out-of-range values Add subclass for Baofeng BF-F8HP #1765 diff -r fa902fc78810 -r 2df0e46fe981 chirp/uv5r.py --- a/chirp/uv5r.py Mon Jul 07 19:42:15 2014 -0400 +++ b/chirp/uv5r.py Mon Jul 14 20:10:30 2014 -0400 @@ -257,9 +257,11 @@ BASETYPE_UV82 = ["US2S", "B82S", "BF82"] BASETYPE_BJ55 = ["BJ55"] # needed for for the Baojie UV-55 in bjuv55.py BASETYPE_UV6 = ["BF1"] -BASETYPE_KT980HP = ["BFP3"] +BASETYPE_KT980HP = ["BFP3V3 B"] +BASETYPE_F8HP = ["BFP3V3 F"] BASETYPE_LIST = BASETYPE_UV5R + BASETYPE_F11 + BASETYPE_UV82 + \ - BASETYPE_BJ55 + BASETYPE_UV6 + BASETYPE_KT980HP + BASETYPE_BJ55 + BASETYPE_UV6 + BASETYPE_KT980HP + \ + BASETYPE_F8HP AB_LIST = ["A", "B"] ALMOD_LIST = ["Site", "Tone", "Code", "_unknown_"] @@ -736,7 +738,7 @@ if not _mem.scan: mem.skip = "S" - if self.MODEL == "KT-980HP": + if self.MODEL == "KT-980HP" or self.MODEL == "BF-F8HP": levels = UV5R_POWER_LEVELS3 else: levels = UV5R_POWER_LEVELS @@ -842,7 +844,7 @@ _mem.wide = mem.mode == "FM" if mem.power: - if self.MODEL == "KT-980HP": + if self.MODEL == "KT-980HP" or self.MODEL == "BF-F8HP": levels = [str(l) for l in UV5R_POWER_LEVELS3] _mem.lowpower = levels.index(str(mem.power)) else: @@ -1283,7 +1285,19 @@ rs.set_apply_callback(apply_offset, _vfob) workmode.append(rs) - if self.MODEL != "KT-980HP": + if self.MODEL == "KT-980HP" or self.MODEL == "BF-F8HP": + rs = RadioSetting("vfoa.txpower3", "VFO A Power", + RadioSettingValueList(TXPOWER3_LIST, + TXPOWER3_LIST[ + _vfoa.txpower3])) + workmode.append(rs) + + rs = RadioSetting("vfob.txpower3", "VFO B Power", + RadioSettingValueList(TXPOWER3_LIST, + TXPOWER3_LIST[ + _vfob.txpower3])) + workmode.append(rs) + else: rs = RadioSetting("vfoa.txpower", "VFO A Power", RadioSettingValueList(TXPOWER_LIST, TXPOWER_LIST[ @@ -1295,18 +1309,6 @@ TXPOWER_LIST[ _vfob.txpower])) workmode.append(rs) - else: - rs = RadioSetting("vfoa.txpower3", "VFO A Power", - RadioSettingValueList(TXPOWER3_LIST, - TXPOWER3_LIST[ - _vfoa.txpower3])) - workmode.append(rs) - - rs = RadioSetting("vfob.txpower3", "VFO B Power", - RadioSettingValueList(TXPOWER3_LIST, - TXPOWER3_LIST[ - _vfob.txpower3])) - workmode.append(rs) rs = RadioSetting("vfoa.widenarr", "VFO A Bandwidth", @@ -1429,14 +1431,22 @@ DTMFST_LIST[_settings.dtmfst])) dtmf.append(rs) + if _ani.dtmfon > 0xC3: + val = 0x00 + else: + val = _ani.dtmfon rs = RadioSetting("ani.dtmfon", "DTMF Speed (on)", RadioSettingValueList(DTMFSPEED_LIST, - DTMFSPEED_LIST[_ani.dtmfon])) + DTMFSPEED_LIST[val])) dtmf.append(rs) + if _ani.dtmfoff > 0xC3: + val = 0x00 + else: + val = _ani.dtmfoff rs = RadioSetting("ani.dtmfoff", "DTMF Speed (off)", RadioSettingValueList(DTMFSPEED_LIST, - DTMFSPEED_LIST[_ani.dtmfoff])) + DTMFSPEED_LIST[val])) dtmf.append(rs) return group @@ -1567,3 +1577,21 @@ def _is_orig(self): # Override this for KT980HP to always return False return False + +(a)directory.register +class BaofengBFF8HPRadio(BaofengUV5R): + VENDOR = "Baofeng" + MODEL = "BF-F8HP" + _basetype = BASETYPE_F8HP + _idents = [UV5R_MODEL_291] + _vhf_range = (130000000, 180000000) + _uhf_range = (400000000, 521000000) + + def get_features(self): + rf = BaofengUV5R.get_features(self) + rf.valid_power_levels = UV5R_POWER_LEVELS3 + return rf + + def _is_orig(self): + # Override this for BFF8HP to always return False + return False

1 0

Re: [chirp_devel] Build test results: Failure
by chirp.cordless＠xoxy.net 14 Jul '14

14 Jul '14

I looked at this, I'm pretty sure my patch did not cause this. However, if you look in the file it modified, mainapp.py, there are linewraps in the existing code near lines 256, 714, 790, 805, 1052, 1113, 1229, 1356, 1516-1559, 1625, and 1693. -dan On Jul 11, 2014, at 3:23 PM, Build System - donotreply(a)danplanet.com wrote: > Tested changes: > > [Dan Drogichen <chirp.cordless(a)xoxy.net>] [developer] Add diffs-only mode to file diff utility - #1699 > > Adds an alternate display mode to the developer tools whole-file hex > dump/diff utility in which only lines which are different are printed. > Ranges of one or more lines that do not differ are replaced with a > single blank line. > > This mode is invoked by setting the first memory location in the > "Diff Radios" popup to -2. The existing functionality invoked by -1 > is not affected. > > #1699 > ... > ================================================ > Tests FAILED: style tests > Build step 'Execute shell' marked build as failure > Email was triggered for: Failure > Sending email for trigger: Failure

2 1