April 2012 - Developers - lists.chirpmyradio.com

[chirp_devel] VX2r stuff
by Andrew Errington 21 May '12

21 May '12

Hi everyone, So far I have these fields decoding successfully: # mode # duplex # freq # power # tmode # name # offset I'm a little worried because when I change a single property of a single memory I get a large number of changes in the memory file. For example, if I change only one channel from high power to low power I get about 37 bytes affected. I expected to see only two or three (the byte that records the power level, and the checksum). 'tune_step' might be working, but I'm not sure, and I need to work on 'tone' and 'dcs'. I think I should have started with the VX3 code instead of VX7, but I just copy stuff from VX3 anyway. I am focusing on decoding the memory image. I haven't done anything to the code that writes a modified memory image. Finally, I seem to have a problem where occasionally I get or lose a null byte at the beginning of the file, which of course messes up the byte count. I think I should get "\x00AHN015" but sometimes I just get "AHN015". That's all for now. I guess there won't be a patch as the VX2r is a new program file. I'll send the whole thing when I'm done, or I can send the current horribly broken mess to anyone who wants to look at it. 73, Andrew ZL3AME

3 3

Re: [chirp_devel] Repeaterbook.com
by Repeaterbook Admin 30 Apr '12

30 Apr '12

Repeaterbook.com is geo-location based. We use the GPS coordinates when we have them, and the nearest city when we do not. We do not publish them readily on the web site to prevent theft. However, we are able to make them available. Garrett, KD6KPC Repeaterbook.com Admin

3 3

[chirp_devel] [PATCH 0 of 1] Support of PMS in FT817 family
by Marco Filippi 29 Apr '12

29 Apr '12

This patch has to be applied over the last pylint series of patches

1 1

[chirp_devel] [PATCH 0 of 1] My personal round with pylint
by Marco Filippi 28 Apr '12

28 Apr '12

The following patch has to be applied over the "pylint patches" from Dan. This reduce the concerns from pylint for 817/857 modules to 0 lines ... only for the brave ;)

3 3

[chirp_devel] [PATCH 0 of 2] First round of pylint-informed cleanups
by Dan Smith 27 Apr '12

27 Apr '12

One problem with coding is python is the lack of a compile stage to point out obvious things like typos in variable names. I'd like to be able to use pylint for help with this, but the list of complaints is too large to be readable. I think it would be nice if we (I) could do the initial work to get the code in line with python coding standards so that the pylint output is reasonable. This is the first stab at that. The first patch adds a pylintrc configuration file and the second is just one in a series of many to come which whittles down the list of complaints by a few thousand lines. It's mostly aimed at the chirp module core, drivers, etc. It doesn't touch the UI and it doesn't touch the bitwise stuff. I'd recommend you run pylint like this: pylint --rcfile=pylintrc --ignore=tmv71.py,tmv71_ll.py,thd72.py,\ pyPEG.py,bitwise.py,bitwise_grammar.py,ft50.py There are still loads of things to fix, but this patch makes a good first stab at it. I'm sending this to the list, not because I'm really expecting any review, but more for a heads-up and/or round of comments about the approach. I want to get this committed to the tree soon because it's likely to clas with any/all patches from other folks... :) Here's the (horrific) diffstat: chirp/alinco.py | 89 ++++++++++--------- chirp/bitwise.py | 9 + chirp/chirp_common.py | 214 ++++++++++++++++++++++++++++------------------ chirp/detect.py | 48 ++++------ chirp/directory.py | 51 ++++------- chirp/errors.py | 6 + chirp/ft2800.py | 34 +++---- chirp/ft60.py | 28 +++--- chirp/ft7800.py | 76 +++++++++------- chirp/ft817.py | 222 ++++++++++++++++++++++++++++-------------------- chirp/ft857.py | 85 +++++++++++------- chirp/generic_csv.py | 76 ++++++++-------- chirp/generic_tpe.py | 19 ++-- chirp/generic_xml.py | 29 ++---- chirp/ic2100.py | 151 ++++++++++++++++---------------- chirp/ic2200.py | 45 ++++----- chirp/ic2720.py | 7 - chirp/ic2820.py | 64 +++++++------ chirp/ic9x.py | 101 ++++++++------------- chirp/ic9x_icf.py | 4 chirp/ic9x_icf_ll.py | 29 ++++-- chirp/ic9x_ll.py | 152 +++++++++++++++----------------- chirp/icf.py | 147 +++++++++++++++++++------------ chirp/icomciv.py | 47 +++++++--- chirp/icq7.py | 8 - chirp/ict70.py | 9 + chirp/icw32.py | 32 +++--- chirp/icx8x.py | 21 ++-- chirp/id31.py | 61 ++++++------- chirp/id800.py | 89 +++++++++---------- chirp/id880.py | 81 +++++++++-------- chirp/idrp.py | 28 +++--- chirp/import_logic.py | 15 ++- chirp/kenwood_hmk.py | 3 chirp/kenwood_live.py | 167 ++++++++++++++++++++---------------- chirp/memmap.py | 5 + chirp/platform.py | 90 +++++++++---------- chirp/radioreference.py | 23 +++- chirp/rfinder.py | 108 +++++++++++++---------- chirp/settings.py | 47 ++++++++-- chirp/template.py | 13 +- chirp/util.py | 12 +- chirp/uv5r.py | 194 ++++++++++++++++++++--------------------- chirp/vx3.py | 35 ++++--- chirp/vx5.py | 7 - chirp/vx6.py | 58 ++++++------ chirp/vx7.py | 32 +++--- chirp/vx8.py | 19 ++-- chirp/vxa700.py | 85 +++++++++--------- chirp/wouxun.py | 151 ++++++++++++++++++-------------- chirp/xml_ll.py | 20 ++-- chirp/yaesu_clone.py | 73 ++++++--------- chirpui/clone.py | 2 chirpui/mainapp.py | 2 54 files changed, 1755 insertions(+), 1468 deletions(-)

1 3

[chirp_devel] [PATCH] [FT857] Fix VFO special memories regression
by Marco Filippi IZ3GME 27 Apr '12

27 Apr '12

# HG changeset patch # User Marco Filippi <iz3gme.marco(a)gmail.com> # Date 1335528984 -7200 # Node ID 958417a4504186fdaf05d42979c577cda19be42a # Parent f332eea27c815554d02b4c411cbc3b4dff066212 [FT857] Fix VFO special memories regression Fixes bug #152 diff --git a/chirp/ft857.py b/chirp/ft857.py --- a/chirp/ft857.py +++ b/chirp/ft857.py @@ -181,7 +181,7 @@ "PMS-5U" : -38, } - SPECIAL_MEMORIES = dict(ft817.FT817Radio.SPECIAL_MEMORIES) + SPECIAL_MEMORIES = dict(SPECIAL_MEMORIES) SPECIAL_MEMORIES.update(SPECIAL_PMS) SPECIAL_MEMORIES_REV = dict(zip(SPECIAL_MEMORIES.values(), SPECIAL_MEMORIES.keys()))

1 0

[chirp_devel] [PATCH] [FT857] Fix PMS memories used/filled bits indexing
by Marco Filippi IZ3GME 25 Apr '12

25 Apr '12

# HG changeset patch # User Marco Filippi <iz3gme.marco(a)gmail.com> # Date 1335383115 -7200 # Node ID 1ef8b05d8bb797229553e6c8059b1682d7c87d23 # Parent ac2c9fd655ba64fbebe389c79fed6f655c8ca041 [FT857] Fix PMS memories used/filled bits indexing Fixes second part of #131 diff -r ac2c9fd655ba -r 1ef8b05d8bb7 chirp/ft857.py --- a/chirp/ft857.py mer apr 25 11:22:48 2012 -0700 +++ b/chirp/ft857.py mer apr 25 21:45:15 2012 +0200 @@ -66,11 +66,11 @@ #seekto 0x4a9; u8 visible[25]; -u16 pmsvisible; +ul16 pmsvisible; #seekto 0x4c4; u8 filled[25]; -u16 pmsfilled; +ul16 pmsfilled; #seekto 0x4df; struct mem_struct memory[200]; @@ -224,7 +224,7 @@ mem.number = self.SPECIAL_PMS[number] mem.extd_number = number - bitindex = -38 - mem.number + bitindex = 47 + mem.number used = (self._memobj.pmsvisible >> bitindex) & 0x01 valid = (self._memobj.pmsfilled >> bitindex) & 0x01 if os.getenv("CHIRP_DEBUG"): @@ -249,7 +249,7 @@ def _set_special_pms(self, mem): cur_mem = self._get_special_pms(self.SPECIAL_MEMORIES_REV[mem.number]) - bitindex = -38 - mem.number + bitindex = 47 + mem.number wasused = (self._memobj.pmsvisible >> bitindex) & 0x01 wasvalid = (self._memobj.pmsfilled >> bitindex) & 0x01

1 0

[chirp_devel] [PATCH] Allow editing name and comment in import dialog. Feature #150
by Tom Hayward 25 Apr '12

25 Apr '12

# HG changeset patch # User Tom Hayward <tom(a)tomh.us> # Date 1335373554 21600 # Node ID cc7ce23661dabc51fe4b922fa82350764489a7ed # Parent 27dd3b9d5d6dd413b25e9d4b6bde729301d1a973 Allow editing name and comment in import dialog. Feature #150 diff -r 27dd3b9d5d6d -r cc7ce23661da chirpui/importdialog.py --- a/chirpui/importdialog.py Wed Apr 25 08:11:06 2012 -0700 +++ b/chirpui/importdialog.py Wed Apr 25 11:05:54 2012 -0600 @@ -113,40 +113,50 @@ def _edited(self, rend, path, new, col): iter = self.__store.get_iter(path) - nloc, = self.__store.get(iter, self.col_nloc) + + if col == self.col_nloc: + nloc, = self.__store.get(iter, self.col_nloc) - try: - val = int(new) - except ValueError: - common.show_error(_("Invalid value. Must be an integer.")) + try: + val = int(new) + except ValueError: + common.show_error(_("Invalid value. Must be an integer.")) + return + + if val == nloc: + return + + if self._check_for_dupe(val): + d = gtk.MessageDialog(parent=self, buttons=gtk.BUTTONS_OK) + d.set_property("text", + _("Location {number} is already being " + "imported").format(number=val)) + d.run() + d.destroy() + return + + self.record_use_of(val) + + elif col == self.col_name or col == self.col_comm: + val = str(new) + + else: return - if val == nloc: - return - - if self._check_for_dupe(val): - d = gtk.MessageDialog(parent=self, buttons=gtk.BUTTONS_OK) - d.set_property("text", - _("Location {number} is already being " - "imported").format(number=val)) - d.run() - d.destroy() - return - - self.record_use_of(val) - self.__store.set(iter, col, val) def get_import_list(self): import_list = [] iter = self.__store.get_iter_first() while iter: - old, new, enb = self.__store.get(iter, + old, new, name, comm, enb = self.__store.get(iter, self.col_oloc, self.col_nloc, + self.col_name, + self.col_comm, self.col_import) if enb: - import_list.append((old, new)) + import_list.append((old, new, name, comm)) iter = self.__store.iter_next(iter) return import_list @@ -238,7 +248,7 @@ src_features = self.src_radio.get_features() - for old, new in import_list: + for old, new, name, comm in import_list: i += 1 print "%sing %i -> %i" % (self.ACTION, old, new) @@ -248,7 +258,9 @@ mem = import_logic.import_mem(self.dst_radio, src_features, src, - {"number" : new}) + {"number" : new, + "name" : name, + "comment": comm}) except import_logic.ImportError, e: print e error_messages[new] = str(e) @@ -271,7 +283,7 @@ return i def make_view(self): - editable = [self.col_nloc] + editable = [self.col_nloc, self.col_name, self.col_comm] self.__store = gtk.ListStore(gobject.TYPE_BOOLEAN, # Import gobject.TYPE_INT, # Source loc

2 1

[chirp_devel] [PATCH] Fix Mac .app so paths with spaces work. Fixes Bug #145
by Tom Hayward 23 Apr '12

23 Apr '12

# HG changeset patch # User Tom Hayward <tom(a)tomh.us> # Date 1335195753 21600 # Node ID ec894bb067ad8edd8527141f108b038a903cd1b3 # Parent ab784c6ec8e88c9e2039efc3cd232a9d5153eae5 Fix Mac .app so paths with spaces work. Fixes Bug #145 diff -r ab784c6ec8e8 -r ec894bb067ad build/chirp.app/Contents/MacOS/chirp --- a/build/chirp.app/Contents/MacOS/chirp Thu Apr 19 17:18:49 2012 -0700 +++ b/build/chirp.app/Contents/MacOS/chirp Mon Apr 23 09:42:33 2012 -0600 @@ -1,15 +1,15 @@ #!/bin/bash -LOCATION=$(dirname ${BASH_SOURCE}) +LOCATION=$(dirname "${BASH_SOURCE}") PYTHON=/opt/kk7ds//Library/Frameworks/Python.framework/Versions/2.7/Resources/Python.app/Contents/MacOS/Python if [ -x $PYTHON ]; then - ln -s $PYTHON ${LOCATION}/../CHIRP + ln -s $PYTHON "${LOCATION}/../CHIRP" PYTHON=${LOCATION}/../CHIRP export PYTHONPATH="/opt/kk7ds//Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/site-packages/" else PYTHON=/opt/kk7ds/bin/python2.7 fi -exec $PYTHON ${LOCATION}/../Resources/chirp/chirpw +exec "$PYTHON" "${LOCATION}/../Resources/chirp/chirpw"

2 1

[chirp_devel] [PATCH] Add stock config for EU LPD and PMR channels. Feature #143
by Tom Hayward 23 Apr '12

23 Apr '12

# HG changeset patch # User Tom Hayward <tom(a)tomh.us> # Date 1335193984 21600 # Node ID bb85ab706994f8a73cec738f95bcf1fe57f9fbe4 # Parent 18c8f983a8715e9eb2f097e6554e05089fc0a9ed Add stock config for EU LPD and PMR channels. Feature #143 diff -r 18c8f983a871 -r bb85ab706994 stock_configs/EU LPD and PMR Channels.csv --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/stock_configs/EU LPD and PMR Channels.csv Mon Apr 23 09:13:04 2012 -0600 @@ -0,0 +1,78 @@ +Location,Name,Frequency,Duplex,Offset,Tone,rToneFreq,cToneFreq,DtcsCode,DtcsPolarity,Mode,TStep,Skip,Comment,URCALL,RPT1CALL,RPT2CALL +1,LPD 01,433.075000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +2,LPD 02,433.100000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +3,LPD 03,433.125000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +4,LPD 04,433.150000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +5,LPD 05,433.175000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +6,LPD 06,433.200000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +7,LPD 07,433.225000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +8,LPD 08,433.250000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +9,LPD 09,433.275000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +10,LPD 10,433.300000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +11,LPD 11,433.325000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +12,LPD 12,433.350000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +13,LPD 13,433.375000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +14,LPD 14,433.400000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +15,LPD 15,433.425000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +16,LPD 16,433.450000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +17,LPD 17,433.475000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +18,LPD 18,433.500000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +19,LPD 19,433.525000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +20,LPD 20,433.550000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +21,LPD 21,433.575000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +22,LPD 22,433.600000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +23,LPD 23,433.625000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +24,LPD 24,433.650000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +25,LPD 25,433.675000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +26,LPD 26,433.700000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +27,LPD 27,433.725000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +28,LPD 28,433.750000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +29,LPD 29,433.775000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +30,LPD 30,433.800000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +31,LPD 31,433.825000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +32,LPD 32,433.850000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +33,LPD 33,433.875000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +34,LPD 34,433.900000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +35,LPD 35,433.925000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +36,LPD 36,433.950000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +37,LPD 37,433.975000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +38,LPD 38,434.000000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +39,LPD 39,434.025000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +40,LPD 40,434.050000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +41,LPD 41,434.075000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +42,LPD 42,434.100000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +43,LPD 43,434.125000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +44,LPD 44,434.150000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +45,LPD 45,434.175000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +46,LPD 46,434.200000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +47,LPD 47,434.225000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +48,LPD 48,434.250000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +49,LPD 49,434.275000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +50,LPD 50,434.300000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +51,LPD 51,434.325000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +52,LPD 52,434.350000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +53,LPD 53,434.375000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +54,LPD 54,434.400000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +55,LPD 55,434.425000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +56,LPD 56,434.450000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +57,LPD 57,434.475000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +58,LPD 58,434.500000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +59,LPD 59,434.525000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +60,LPD 60,434.550000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +61,LPD 61,434.575000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +62,LPD 62,434.600000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +63,LPD 63,434.625000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +64,LPD 64,434.650000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +65,LPD 65,434.675000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +66,LPD 66,434.700000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +67,LPD 67,434.725000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +68,LPD 68,434.750000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +69,LPD 69,434.775000,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +71,PMR 1,446.006250,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +72,PMR 2,446.018750,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +73,PMR 3,446.031250,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +74,PMR 4,446.043750,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +75,PMR 5,446.056250,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +76,PMR 6,446.068750,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +77,PMR 7,446.081250,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,, +78,PMR 8,446.093750,,0.600000,,88.5,88.5,023,NN,FM,5.00,,,,,,

2 1