December 2018 - Developers - lists.chirpmyradio.com

[chirp_devel] Using TOX to test on MS Windows
by Eric A. Cottrell 03 Jan '20

03 Jan '20

Hello, I initially used MS Windows to develop some changes to CHIRP. I am having a problem with TOX. It appears that it can not find the chirp modules and the version numbers. I tried building and testing under Linux and things worked fine. I noticed the zip file is named for the version under Linux and unknown with zeros under windows Is CHIRP only meant to be developed using Linux or do I have a setup problem? 73 Eric --- This email has been checked for viruses by Avast antivirus software. https://www.avast.com/antivirus

3 9

[chirp_devel] TOX tests on Mac.
by Nicolas Pike 31 Dec '19

31 Dec '19

> ImportError: cannot import name Serial > > What part of the setup have I missed? You're missing python-serial. Can you add deps=serial to the [testenv:driver] section in tox.ini and see if that works? Added serial to tox deps and it gets a bit further, any thoughts? as before UNKNOWN-0.0.0.zp can't be write, and now we have no module named chirp. Is there something to be done with the build first? Thanks. Nicolas nicolass-Mac-mini:chirp.hg nicolas$ tox -e driver -- -d Icom_IC-2820H *GLOB sdist-make: /Users/nicolas/Documents/FT70CHIRP/chirp.hg/setup.py* *driver inst-nodeps: /Users/nicolas/Documents/FT70CHIRP/chirp.hg/.tox/dist/UNKNOWN-0.0.0.zip* ERROR: invocation failed (exit code 1), logfile: /Users/nicolas/Documents/FT70CHIRP/chirp.hg/.tox/driver/log/driver-4.log ERROR: actionid: driver msg: installpkg cmdargs: ['/Users/nicolas/Documents/FT70CHIRP/chirp.hg/.tox/driver/bin/pip', 'install', '-U', '--no-deps', '/Users/nicolas/Documents/FT70CHIRP/chirp.hg/.tox/dist/UNKNOWN-0.0.0.zip'] Processing ./.tox/dist/UNKNOWN-0.0.0.zip Complete output from command python setup.py egg_info: Traceback (most recent call last): File "<string>", line 1, in <module> File "/private/var/folders/yf/rh0gfjk57pzfvdls7z6nwnmr0000gn/T/pip-kuILg4-build/setup.py", line 5, in <module> from chirp import CHIRP_VERSION ImportError: No module named chirp ---------------------------------------- Command "python setup.py egg_info" failed with error code 1 in /private/var/folders/yf/rh0gfjk57pzfvdls7z6nwnmr0000gn/T/pip-kuILg4-build/ *driver installed: future==0.16.0,iso8601==0.1.12,libxml2-python==2.9.7,lxml==4.1.1,mercurial==4.5,pluggy==0.6.0,py==1.5.2,pycairo==1.15.3,PyYAML==3.12,serial==0.0.38,six==1.11.0,tox==2.9.1,virtualenv==15.1.0* _______________________________________________________________________________ summary _______________________________________________________________________________ ERROR: driver: InvocationError: /Users/nicolas/Documents/FT70CHIRP/chirp.hg/.tox/driver/bin/pip install -U --no-deps /Users/nicolas/Documents/FT70CHIRP/chirp.hg/.tox/dist/UNKNOWN-0.0.0.zip (see /Users/nicolas/Documents/FT70CHIRP/chirp.hg/.tox/driver/log/driver-4.log) nicolass-Mac-mini:chirp.hg nicolas$

4 5

[chirp_devel] New Model #6259 Yaesu FT-7100
by Bruno 11 Jan '19

11 Jan '19

Hello Driver and image for FT-7100 in the attachment. Thank you very much for your support. A few remarks: -- tox -- Passes test with attached image. Does not pass if image is opened in chirp and saved again. It seems that the saving process adds some MAGIC in chirp_common.py#save_mmap. tox Error message: TestFailedError: <class 'chirp.drivers.ft7100.FT7100RadioUHF'> detected as <class 'chirp.directory.DynamicRadioAlias'> Puxing_PX-777.img has to be removed from chirp.hg/tests/images: ##### ERROR: tests (unittest.loader.LoadTestsFailure) ---------------------------------------------------------------------- TestCrashError: ord() expected a character, but string of length 0 found ##### -- tests/run_tests.py -- Recursive call of run_rclass_image() in tests/run_tests.py#1156 Test passes when rf.has_sub_devices = False Best regards, Bruno

3 6

[chirp_devel] [PATCH] FT-818ND US Model - I think this patch may work, I can't test. Bug# 6289
by Vinny Stipo 03 Jan '19

03 Jan '19

# HG changeset patch # User Vinny Stipo <v(a)xpctech.com> # Date 1544661860 28800 # Wed Dec 12 16:44:20 2018 -0800 # Node ID df70e2455c4877c9d58f440690e6161da16c880e # Parent 62b4cbefa86738c37317a133f903500f669baf23 FT-818ND US Model - I think this patch may work, I can't test. Bug# 6289 diff --git a/chirp/drivers/ft818.py b/chirp/drivers/ft818.py --- a/chirp/drivers/ft818.py +++ b/chirp/drivers/ft818.py @@ -250,3 +250,16 @@ SPECIAL_MEMORIES_REV = dict(zip(SPECIAL_MEMORIES.values(), SPECIAL_MEMORIES.keys())) + +(a)directory.register +class FT818NDUSRadio(FT818Radio): + + """Yaesu FT-818ND (US version)""" + MODEL = "FT-818ND (US)" + + _model = "" + _US_model = True + _memsize = 6703 + + _block_lengths = [2, 40, 208, 208, 208, 208, 198, 53, 130, 118, 130, 130] +

3 10

[chirp_devel] Newbie working on New Model #4787
by Dan Clemmensen 31 Dec '18

31 Dec '18

I am a new Ham who foolishly purchased a radio not supported by CHIRP. (Yaesu FT-4XR). This HT and its modern siblings (FT-65, FT-75, FT-35...) do not use the same protocol as older Yaesu HTs (e.g. FT-60, Ft-70), nor do they use the same cable. They may not use the same memory map either, but the documentation makes it likely that the family's memory maps will be similar to each other but of different sizes. I have figured out the protocol but not the memory map. I now understand how to work on the map (Thanks, Al and Pavel!). Looking at the "drivers" directory, it appears that each supported radio has its own .py file, but there is also shared code when a bunch of radios have similar protocols or memory maps. I see how to build a driver for my FT-4XR, but it is not clear how to structure this code to make it easy to add support for other members of the family. I do not have a good name for the family. They all share the SCU-35 programming cable, and this cable is not used by any other radios, so one thought is to name the common module scu35.py, but that seems like a weird name. Any guidance will be appreciated. I could just create FT4.py and let others deal with other family members, but that seems selfish. Is there an existing family that I can use as a worked example of how to structure the code?

2 1

[chirp_devel] Adding values to STEPS list
by Al Simons 30 Dec '18

30 Dec '18

Hello to the team; thank you very much for providing this tool! I'm new to chirp, not to SW devel. In programming my new Baofeng F8HP, I was surprised that 15 kHz wasn't a valid step value, since that is the standard US channel spacing on 2m. In looking through the drivers, the STEP values seem to be very radio specific for reasons I don't yet understand. Before I put in a bug and patch to add 15kHz to the uv3r driver, I need to ask whether there a specific reason it isn't already in the list which makes it incorrect to add it? Thanks, Al WA1TYB

3 5

[chirp_devel] [PATCH] [FT8900] Deleted inherited get_bank_model function, fixes #6293
by OH1HQZ Kalle Tuulos 16 Dec '18

16 Dec '18

# HG changeset patch # User Kalle Tuulos <oh1hqz(a)gmail.com> # Date 1544563646 -7200 # Tue Dec 11 23:27:26 2018 +0200 # Node ID a7e1b67290c9775f5e7be286d2a05855ac4066f2 # Parent 62b4cbefa86738c37317a133f903500f669baf23 [FT8900] Deleted inherited get_bank_model function, fixes #6293 The FT-8900 inherits its class from FT-8800, which defines also the get_bank_model function. The existence of this function is checked in order to decide, whether Banks tab is shown or not. As banks are not supported in FT-8900, the banks tab must not be shown. diff --git a/chirp/drivers/ft7800.py b/chirp/drivers/ft7800.py --- a/chirp/drivers/ft7800.py +++ b/chirp/drivers/ft7800.py @@ -977,6 +977,8 @@ MODES = ["FM", "NFM", "AM"] + del FT8800Radio.get_bank_model + def process_mmap(self): self._memobj = bitwise.parse(MEM_FORMAT_8900, self._mmap)

2 2

[chirp_devel] Build test results: Failure
by Build System 14 Dec '18

14 Dec '18

Tested changes: Changes for Build #765 [Dan Smith <dsmith(a)danplanet.com>] Add KG-UV9Dplus image for #3509 [Kalle Tuulos <oh1hqz(a)gmail.com>] [FT8900] Deleted inherited get_bank_model function, fixes #6293 The FT-8900 inherits its class from FT-8800, which defines also the get_bank_model function. The existence of this function is checked in order to decide, whether Banks tab is shown or not. As banks are not supported in FT-8900, the banks tab must not be shown. [Jim Lieb <lieb(a)sea-troll.net>] [kguv9dplus] Add support for Wouxon KG-UV9D Plus Issue: #3509 Adds support for Wouxon KG-UV9d Plus model available from Powerwerx Passes run_tests and pycodestyle-2.7 This supports all functions relative to the Wouxon/Powerwerx configuration app with the following exceptions: 1. Scanning CTCSS/DCS (menu 51) is only available on the radio. It appears to be in volatile memory and gets reset to default (CTCSS) on power cycle. The supplied app doesn't support it either. 2. DTMF Transmit Interval is on the configuration tab and seems to operate on the supplied app but it does not appear to be written to the radio. As a result, it is not in the memory map and doesn't appear at all in this driver. 3. The supplied app fills in '0's to the right of either the menu or reset password UI fields. The Chirp UI doesn't seem to support field writeback so a less than 6 digit password has trailing blanks. However, the full '0' padded password is correctly uploaded to radio. Re-downloading the radio will show the filled out field correctly. For example, a password of '1234' is actually sent to the radio as '123400'. 4. Some tabs (Call ids in partiicular) would be better presented as a three column table. Signed-off-by: Jim Lieb <lieb(a)sea-troll.net> [Tom Hayward <tom(a)tomh.us>] [id880] Fix typo in charset definition. #281 [Tom Hayward <tom(a)tomh.us>] [thf6a] Support full charset (ASCII). Fixes #141 [Tom Hayward <tom(a)tomh.us>] [id880] Support full charset. Fixes #281 [Tom Hayward <tom(a)tomh.us>] [vx5] Support full charset (ASCII). Fixes #292 [Tom Hayward <tom(a)tomh.us>] [id31a] set used bit when creating new memory, clear when deleting. Fixes #269 [Tom Hayward <tom(a)tomh.us>] Support PyGTK < 2.22 in bank edit. Fixes #231 [Tom Hayward <tom(a)tomh.us>] [d710] [v71] [d72] Fix tone list (not all tones are supported). Fixes #212 [Dan Smith <dsmith(a)danplanet.com>] [vx7] Fix setting memory power levels on 220MHz band Fixes #214 [Dan Smith <dsmith(a)danplanet.com>] fips: Pennsylvania FIPS code was wrong. #117 [Marco Filippi <iz3gme.marco(a)gmail.com>] Consider lower bound frequency of each valid_band as valid Fix bug #181 [Tom Hayward <tom(a)tomh.us>] tmd700: allow 8-char names. Fixes #176 [Dan Smith <dsmith(a)danplanet.com>] Fix the "blind deletion" problem, as well as properly direct copy/paste Fixes #172 [David Griffith <dave(a)661.org>] Bug #155 fix: VX-7 1.25m power levels [David Griffith <dave(a)661.org>] New INSTALL and README files Fixes #122 [Tom Hayward <tom(a)tomh.us>] thd72: only use hardware flow on OS X. Fixes #166 [Marco Filippi <iz3gme.marco(a)gmail.com>] [FT817] Tone freq not set correctly Same as #88 for FT857, to avoid code duplication fix code have been moved from ft857 to its ancestor class Fix bug #163 [Tom Hayward <tom(a)tomh.us>] Fix Mac .app so paths with spaces work. Fixes Bug #145 Full log: [...truncated 267 lines...] Testing Kenwood TK-8102 copy all ... ok test_detect (tests.TestCase_KenwoodTK8102) Testing Kenwood TK-8102 detect ... ok test_edges (tests.TestCase_KenwoodTK8102) Testing Kenwood TK-8102 edges ... ok test_settings (tests.TestCase_KenwoodTK8102) Testing Kenwood TK-8102 settings ... ok test_banks (tests.TestCase_IcomID51Plus) Testing Icom ID-51 Plus banks ... ok test_brute_force (tests.TestCase_IcomID51Plus) Testing Icom ID-51 Plus brute force ... ok test_clone (tests.TestCase_IcomID51Plus) Testing Icom ID-51 Plus clone ... ok test_copy_all (tests.TestCase_IcomID51Plus) Testing Icom ID-51 Plus copy all ... ok test_detect (tests.TestCase_IcomID51Plus) Testing Icom ID-51 Plus detect ... ok test_edges (tests.TestCase_IcomID51Plus) Testing Icom ID-51 Plus edges ... ok test_settings (tests.TestCase_IcomID51Plus) Testing Icom ID-51 Plus settings ... ok test_banks (tests.TestCase_BTECHMURSV1) Testing BTECH MURS-V1 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHMURSV1) Testing BTECH MURS-V1 brute force ... ok test_clone (tests.TestCase_BTECHMURSV1) Testing BTECH MURS-V1 clone ... ok test_copy_all (tests.TestCase_BTECHMURSV1) Testing BTECH MURS-V1 copy all ... ok test_detect (tests.TestCase_BTECHMURSV1) Testing BTECH MURS-V1 detect ... ok test_edges (tests.TestCase_BTECHMURSV1) Testing BTECH MURS-V1 edges ... skipped 'No mutable memory locations found' test_settings (tests.TestCase_BTECHMURSV1) Testing BTECH MURS-V1 settings ... ok test_banks (tests.TestCase_YaesuFT2800M) Testing Yaesu FT-2800M banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT2800M) Testing Yaesu FT-2800M brute force ... ok test_clone (tests.TestCase_YaesuFT2800M) Testing Yaesu FT-2800M clone ... ok test_copy_all (tests.TestCase_YaesuFT2800M) Testing Yaesu FT-2800M copy all ... ok test_detect (tests.TestCase_YaesuFT2800M) Testing Yaesu FT-2800M detect ... ok test_edges (tests.TestCase_YaesuFT2800M) Testing Yaesu FT-2800M edges ... ok test_settings (tests.TestCase_YaesuFT2800M) Testing Yaesu FT-2800M settings ... skipped 'Settings not supported' test_banks (tests.TestCase_BTECHUV5001) Testing BTECH UV-5001 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHUV5001) Testing BTECH UV-5001 brute force ... ok test_clone (tests.TestCase_BTECHUV5001) Testing BTECH UV-5001 clone ... ok test_copy_all (tests.TestCase_BTECHUV5001) Testing BTECH UV-5001 copy all ... ok test_detect (tests.TestCase_BTECHUV5001) Testing BTECH UV-5001 detect ... ok test_edges (tests.TestCase_BTECHUV5001) Testing BTECH UV-5001 edges ... ok test_settings (tests.TestCase_BTECHUV5001) Testing BTECH UV-5001 settings ... ok test_banks (tests.TestCase_BTECHUV25X2) Testing BTECH UV-25X2 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHUV25X2) Testing BTECH UV-25X2 brute force ... ok test_clone (tests.TestCase_BTECHUV25X2) Testing BTECH UV-25X2 clone ... ok test_copy_all (tests.TestCase_BTECHUV25X2) Testing BTECH UV-25X2 copy all ... ok test_detect (tests.TestCase_BTECHUV25X2) Testing BTECH UV-25X2 detect ... ok test_edges (tests.TestCase_BTECHUV25X2) Testing BTECH UV-25X2 edges ... ok test_settings (tests.TestCase_BTECHUV25X2) Testing BTECH UV-25X2 settings ... ok test_banks (tests.TestCase_TYTTHUV3R25) Testing TYT TH-UV3R-25 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TYTTHUV3R25) Testing TYT TH-UV3R-25 brute force ... ok test_clone (tests.TestCase_TYTTHUV3R25) Testing TYT TH-UV3R-25 clone ... ok test_copy_all (tests.TestCase_TYTTHUV3R25) Testing TYT TH-UV3R-25 copy all ... ok test_detect (tests.TestCase_TYTTHUV3R25) Testing TYT TH-UV3R-25 detect ... ok test_edges (tests.TestCase_TYTTHUV3R25) Testing TYT TH-UV3R-25 edges ... ok test_settings (tests.TestCase_TYTTHUV3R25) Testing TYT TH-UV3R-25 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_IcomID880H) Testing Icom ID-880H banks ... ok test_brute_force (tests.TestCase_IcomID880H) Testing Icom ID-880H brute force ... ok test_clone (tests.TestCase_IcomID880H) Testing Icom ID-880H clone ... ok test_copy_all (tests.TestCase_IcomID880H) Testing Icom ID-880H copy all ... ok test_detect (tests.TestCase_IcomID880H) Testing Icom ID-880H detect ... ok test_edges (tests.TestCase_IcomID880H) Testing Icom ID-880H edges ... ok test_settings (tests.TestCase_IcomID880H) Testing Icom ID-880H settings ... ok test_banks (tests.TestCase_YaesuFT70D) Testing Yaesu FT-70D banks ... ok test_brute_force (tests.TestCase_YaesuFT70D) Testing Yaesu FT-70D brute force ... ok test_clone (tests.TestCase_YaesuFT70D) Testing Yaesu FT-70D clone ... ok test_copy_all (tests.TestCase_YaesuFT70D) Testing Yaesu FT-70D copy all ... ok test_detect (tests.TestCase_YaesuFT70D) Testing Yaesu FT-70D detect ... ok test_edges (tests.TestCase_YaesuFT70D) Testing Yaesu FT-70D edges ... ok test_settings (tests.TestCase_YaesuFT70D) Testing Yaesu FT-70D settings ... ok test_banks (tests.TestCase_RetevisRT26) Testing Retevis RT26 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RetevisRT26) Testing Retevis RT26 brute force ... ok test_clone (tests.TestCase_RetevisRT26) Testing Retevis RT26 clone ... ok test_copy_all (tests.TestCase_RetevisRT26) Testing Retevis RT26 copy all ... ok test_detect (tests.TestCase_RetevisRT26) Testing Retevis RT26 detect ... ok test_edges (tests.TestCase_RetevisRT26) Testing Retevis RT26 edges ... ok test_settings (tests.TestCase_RetevisRT26) Testing Retevis RT26 settings ... ok test_banks (tests.TestCase_BaofengUV6R) Testing Baofeng UV-6R banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BaofengUV6R) Testing Baofeng UV-6R brute force ... ok test_clone (tests.TestCase_BaofengUV6R) Testing Baofeng UV-6R clone ... ok test_copy_all (tests.TestCase_BaofengUV6R) Testing Baofeng UV-6R copy all ... ok test_detect (tests.TestCase_BaofengUV6R) Testing Baofeng UV-6R detect ... ok test_edges (tests.TestCase_BaofengUV6R) Testing Baofeng UV-6R edges ... ok test_settings (tests.TestCase_BaofengUV6R) Testing Baofeng UV-6R settings ... ok test_banks (tests.TestCase_WouxunKGUV6) Testing Wouxun KG-UV6 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_WouxunKGUV6) Testing Wouxun KG-UV6 brute force ... ok test_clone (tests.TestCase_WouxunKGUV6) Testing Wouxun KG-UV6 clone ... ok test_copy_all (tests.TestCase_WouxunKGUV6) Testing Wouxun KG-UV6 copy all ... ok test_detect (tests.TestCase_WouxunKGUV6) Testing Wouxun KG-UV6 detect ... ok test_edges (tests.TestCase_WouxunKGUV6) Testing Wouxun KG-UV6 edges ... ok test_settings (tests.TestCase_WouxunKGUV6) Testing Wouxun KG-UV6 settings ... ok test_banks (tests.TestCase_PuxingPX2R) Testing Puxing PX-2R banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_PuxingPX2R) Testing Puxing PX-2R brute force ... ok test_clone (tests.TestCase_PuxingPX2R) Testing Puxing PX-2R clone ... ok test_copy_all (tests.TestCase_PuxingPX2R) Testing Puxing PX-2R copy all ... ok test_detect (tests.TestCase_PuxingPX2R) Testing Puxing PX-2R detect ... ok test_edges (tests.TestCase_PuxingPX2R) Testing Puxing PX-2R edges ... ok test_settings (tests.TestCase_PuxingPX2R) Testing Puxing PX-2R settings ... skipped 'Settings not supported' test_banks (tests.TestCase_YaesuFT817ND) Testing Yaesu FT-817ND banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT817ND) Testing Yaesu FT-817ND brute force ... ok test_clone (tests.TestCase_YaesuFT817ND) Testing Yaesu FT-817ND clone ... ok test_copy_all (tests.TestCase_YaesuFT817ND) Testing Yaesu FT-817ND copy all ... ok test_detect (tests.TestCase_YaesuFT817ND) Testing Yaesu FT-817ND detect ... ok test_edges (tests.TestCase_YaesuFT817ND) Testing Yaesu FT-817ND edges ... ok test_settings (tests.TestCase_YaesuFT817ND) Testing Yaesu FT-817ND settings ... ok test_banks (tests.TestCase_IcomIC2820H) Testing Icom IC-2820H banks ... ok test_brute_force (tests.TestCase_IcomIC2820H) Testing Icom IC-2820H brute force ... ok test_clone (tests.TestCase_IcomIC2820H) Testing Icom IC-2820H clone ... ok test_copy_all (tests.TestCase_IcomIC2820H) Testing Icom IC-2820H copy all ... ok test_detect (tests.TestCase_IcomIC2820H) Testing Icom IC-2820H detect ... ok test_edges (tests.TestCase_IcomIC2820H) Testing Icom IC-2820H edges ... ok test_settings (tests.TestCase_IcomIC2820H) Testing Icom IC-2820H settings ... ok test_banks (tests.TestCase_JetstreamJT220M) Testing Jetstream JT220M banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_JetstreamJT220M) Testing Jetstream JT220M brute force ... ok test_clone (tests.TestCase_JetstreamJT220M) Testing Jetstream JT220M clone ... ok test_copy_all (tests.TestCase_JetstreamJT220M) Testing Jetstream JT220M copy all ... ok test_detect (tests.TestCase_JetstreamJT220M) Testing Jetstream JT220M detect ... ok test_edges (tests.TestCase_JetstreamJT220M) Testing Jetstream JT220M edges ... ok test_settings (tests.TestCase_JetstreamJT220M) Testing Jetstream JT220M settings ... skipped 'Settings not supported' test_banks (tests.TestCase_AlincoDJ596) Testing Alinco DJ596 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_AlincoDJ596) Testing Alinco DJ596 brute force ... ok test_clone (tests.TestCase_AlincoDJ596) Testing Alinco DJ596 clone ... ok test_copy_all (tests.TestCase_AlincoDJ596) Testing Alinco DJ596 copy all ... ok test_detect (tests.TestCase_AlincoDJ596) Testing Alinco DJ596 detect ... ok test_edges (tests.TestCase_AlincoDJ596) Testing Alinco DJ596 edges ... ok test_settings (tests.TestCase_AlincoDJ596) Testing Alinco DJ596 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_JetstreamJT270MH) Testing Jetstream JT270MH banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_JetstreamJT270MH) Testing Jetstream JT270MH brute force ... ok test_clone (tests.TestCase_JetstreamJT270MH) Testing Jetstream JT270MH clone ... ok test_copy_all (tests.TestCase_JetstreamJT270MH) Testing Jetstream JT270MH copy all ... ok test_detect (tests.TestCase_JetstreamJT270MH) Testing Jetstream JT270MH detect ... ok test_edges (tests.TestCase_JetstreamJT270MH) Testing Jetstream JT270MH edges ... ok test_settings (tests.TestCase_JetstreamJT270MH) Testing Jetstream JT270MH settings ... ok test_banks (tests.TestCase_BTECHUV2501220) Testing BTECH UV-2501+220 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHUV2501220) Testing BTECH UV-2501+220 brute force ... ok test_clone (tests.TestCase_BTECHUV2501220) Testing BTECH UV-2501+220 clone ... ok test_copy_all (tests.TestCase_BTECHUV2501220) Testing BTECH UV-2501+220 copy all ... ok test_detect (tests.TestCase_BTECHUV2501220) Testing BTECH UV-2501+220 detect ... ok test_edges (tests.TestCase_BTECHUV2501220) Testing BTECH UV-2501+220 edges ... ok test_settings (tests.TestCase_BTECHUV2501220) Testing BTECH UV-2501+220 settings ... ok test_banks (tests.TestCase_BTECHUV50X2) Testing BTECH UV-50X2 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHUV50X2) Testing BTECH UV-50X2 brute force ... ok test_clone (tests.TestCase_BTECHUV50X2) Testing BTECH UV-50X2 clone ... ok test_copy_all (tests.TestCase_BTECHUV50X2) Testing BTECH UV-50X2 copy all ... ok test_detect (tests.TestCase_BTECHUV50X2) Testing BTECH UV-50X2 detect ... ok test_edges (tests.TestCase_BTECHUV50X2) Testing BTECH UV-50X2 edges ... ok test_settings (tests.TestCase_BTECHUV50X2) Testing BTECH UV-50X2 settings ... ok test_banks (tests.TestCase_IcomICT7H) Testing Icom IC-T7H banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_IcomICT7H) Testing Icom IC-T7H brute force ... ok test_clone (tests.TestCase_IcomICT7H) Testing Icom IC-T7H clone ... ok test_copy_all (tests.TestCase_IcomICT7H) Testing Icom IC-T7H copy all ... ok test_detect (tests.TestCase_IcomICT7H) Testing Icom IC-T7H detect ... ok test_edges (tests.TestCase_IcomICT7H) Testing Icom IC-T7H edges ... ok test_settings (tests.TestCase_IcomICT7H) Testing Icom IC-T7H settings ... skipped 'Settings not supported' test_banks (tests.TestCase_BaojieBJ9900) Testing Baojie BJ-9900 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BaojieBJ9900) Testing Baojie BJ-9900 brute force ... ok test_clone (tests.TestCase_BaojieBJ9900) Testing Baojie BJ-9900 clone ... ok test_copy_all (tests.TestCase_BaojieBJ9900) Testing Baojie BJ-9900 copy all ... ok test_detect (tests.TestCase_BaojieBJ9900) Testing Baojie BJ-9900 detect ... ok test_edges (tests.TestCase_BaojieBJ9900) Testing Baojie BJ-9900 edges ... ok test_settings (tests.TestCase_BaojieBJ9900) Testing Baojie BJ-9900 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_IcomIC2300H) Testing Icom IC-2300H banks ... ok test_brute_force (tests.TestCase_IcomIC2300H) Testing Icom IC-2300H brute force ... ok test_clone (tests.TestCase_IcomIC2300H) Testing Icom IC-2300H clone ... ok test_copy_all (tests.TestCase_IcomIC2300H) Testing Icom IC-2300H copy all ... ok test_detect (tests.TestCase_IcomIC2300H) Testing Icom IC-2300H detect ... ok test_edges (tests.TestCase_IcomIC2300H) Testing Icom IC-2300H edges ... ok test_settings (tests.TestCase_IcomIC2300H) Testing Icom IC-2300H settings ... ok test_banks (tests.TestCase_YaesuVX7) Testing Yaesu VX-7 banks ... ok test_brute_force (tests.TestCase_YaesuVX7) Testing Yaesu VX-7 brute force ... ok test_clone (tests.TestCase_YaesuVX7) Testing Yaesu VX-7 clone ... ok test_copy_all (tests.TestCase_YaesuVX7) Testing Yaesu VX-7 copy all ... ok test_detect (tests.TestCase_YaesuVX7) Testing Yaesu VX-7 detect ... ok test_edges (tests.TestCase_YaesuVX7) Testing Yaesu VX-7 edges ... ok test_settings (tests.TestCase_YaesuVX7) Testing Yaesu VX-7 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_TDXoneTDQ8A) Testing TDXone TD-Q8A banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TDXoneTDQ8A) Testing TDXone TD-Q8A brute force ... ok test_clone (tests.TestCase_TDXoneTDQ8A) Testing TDXone TD-Q8A clone ... ok test_copy_all (tests.TestCase_TDXoneTDQ8A) Testing TDXone TD-Q8A copy all ... ok test_detect (tests.TestCase_TDXoneTDQ8A) Testing TDXone TD-Q8A detect ... ok test_edges (tests.TestCase_TDXoneTDQ8A) Testing TDXone TD-Q8A edges ... ok test_settings (tests.TestCase_TDXoneTDQ8A) Testing TDXone TD-Q8A settings ... ok test_banks (tests.TestCase_WouxunKG818) Testing Wouxun KG-818 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_WouxunKG818) Testing Wouxun KG-818 brute force ... ok test_clone (tests.TestCase_WouxunKG818) Testing Wouxun KG-818 clone ... ok test_copy_all (tests.TestCase_WouxunKG818) Testing Wouxun KG-818 copy all ... ok test_detect (tests.TestCase_WouxunKG818) Testing Wouxun KG-818 detect ... ok test_edges (tests.TestCase_WouxunKG818) Testing Wouxun KG-818 edges ... ok test_settings (tests.TestCase_WouxunKG818) Testing Wouxun KG-818 settings ... ok test_banks (tests.TestCase_WACCOMMINI8900) Testing WACCOM MINI-8900 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_WACCOMMINI8900) Testing WACCOM MINI-8900 brute force ... ok test_clone (tests.TestCase_WACCOMMINI8900) Testing WACCOM MINI-8900 clone ... ok test_copy_all (tests.TestCase_WACCOMMINI8900) Testing WACCOM MINI-8900 copy all ... ok test_detect (tests.TestCase_WACCOMMINI8900) Testing WACCOM MINI-8900 detect ... ok test_edges (tests.TestCase_WACCOMMINI8900) Testing WACCOM MINI-8900 edges ... ok test_settings (tests.TestCase_WACCOMMINI8900) Testing WACCOM MINI-8900 settings ... ok test_banks (tests.TestCase_BaofengUV3R) Testing Baofeng UV-3R banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BaofengUV3R) Testing Baofeng UV-3R brute force ... ok test_clone (tests.TestCase_BaofengUV3R) Testing Baofeng UV-3R clone ... ok test_copy_all (tests.TestCase_BaofengUV3R) Testing Baofeng UV-3R copy all ... ok test_detect (tests.TestCase_BaofengUV3R) Testing Baofeng UV-3R detect ... ok test_edges (tests.TestCase_BaofengUV3R) Testing Baofeng UV-3R edges ... ok test_settings (tests.TestCase_BaofengUV3R) Testing Baofeng UV-3R settings ... ok test_banks (tests.TestCase_RadioddityR2) Testing Radioddity R2 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RadioddityR2) Testing Radioddity R2 brute force ... ok test_clone (tests.TestCase_RadioddityR2) Testing Radioddity R2 clone ... ok test_copy_all (tests.TestCase_RadioddityR2) Testing Radioddity R2 copy all ... ok test_detect (tests.TestCase_RadioddityR2) Testing Radioddity R2 detect ... ok test_edges (tests.TestCase_RadioddityR2) Testing Radioddity R2 edges ... ok test_settings (tests.TestCase_RadioddityR2) Testing Radioddity R2 settings ... ok test_banks (tests.TestCase_AnyToneTERMN8R) Testing AnyTone TERMN-8R banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_AnyToneTERMN8R) Testing AnyTone TERMN-8R brute force ... ok test_clone (tests.TestCase_AnyToneTERMN8R) Testing AnyTone TERMN-8R clone ... ok test_copy_all (tests.TestCase_AnyToneTERMN8R) Testing AnyTone TERMN-8R copy all ... ok test_detect (tests.TestCase_AnyToneTERMN8R) Testing AnyTone TERMN-8R detect ... ok test_edges (tests.TestCase_AnyToneTERMN8R) Testing AnyTone TERMN-8R edges ... ok test_settings (tests.TestCase_AnyToneTERMN8R) Testing AnyTone TERMN-8R settings ... ok test_banks (tests.TestCase_YaesuFT50) Testing Yaesu FT-50 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT50) Testing Yaesu FT-50 brute force ... ok test_clone (tests.TestCase_YaesuFT50) Testing Yaesu FT-50 clone ... ok test_copy_all (tests.TestCase_YaesuFT50) Testing Yaesu FT-50 copy all ... ok test_detect (tests.TestCase_YaesuFT50) Testing Yaesu FT-50 detect ... ok test_edges (tests.TestCase_YaesuFT50) Testing Yaesu FT-50 edges ... ok test_settings (tests.TestCase_YaesuFT50) Testing Yaesu FT-50 settings ... ok test_banks (tests.TestCase_IcomICP7) Testing Icom IC-P7 banks ... ok test_brute_force (tests.TestCase_IcomICP7) Testing Icom IC-P7 brute force ... ok test_clone (tests.TestCase_IcomICP7) Testing Icom IC-P7 clone ... ok test_copy_all (tests.TestCase_IcomICP7) Testing Icom IC-P7 copy all ... ok test_detect (tests.TestCase_IcomICP7) Testing Icom IC-P7 detect ... ok test_edges (tests.TestCase_IcomICP7) Testing Icom IC-P7 edges ... ok test_settings (tests.TestCase_IcomICP7) Testing Icom IC-P7 settings ... ok test_banks (tests.TestCase_BoblovX3Plus) Testing Boblov X3Plus banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BoblovX3Plus) Testing Boblov X3Plus brute force ... ok test_clone (tests.TestCase_BoblovX3Plus) Testing Boblov X3Plus clone ... ok test_copy_all (tests.TestCase_BoblovX3Plus) Testing Boblov X3Plus copy all ... ok test_detect (tests.TestCase_BoblovX3Plus) Testing Boblov X3Plus detect ... ok test_edges (tests.TestCase_BoblovX3Plus) Testing Boblov X3Plus edges ... ok test_settings (tests.TestCase_BoblovX3Plus) Testing Boblov X3Plus settings ... ok test_banks (tests.TestCase_IcomICW32E) Testing Icom IC-W32E banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_IcomICW32E) Testing Icom IC-W32E brute force ... ok test_clone (tests.TestCase_IcomICW32E) Testing Icom IC-W32E clone ... ok test_copy_all (tests.TestCase_IcomICW32E) Testing Icom IC-W32E copy all ... ok test_detect (tests.TestCase_IcomICW32E) Testing Icom IC-W32E detect ... ok test_edges (tests.TestCase_IcomICW32E) Testing Icom IC-W32E edges ... ok test_settings (tests.TestCase_IcomICW32E) Testing Icom IC-W32E settings ... skipped 'Settings not supported' test_banks (tests.TestCase_JetstreamJT270M) Testing Jetstream JT270M banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_JetstreamJT270M) Testing Jetstream JT270M brute force ... ok test_clone (tests.TestCase_JetstreamJT270M) Testing Jetstream JT270M clone ... ok test_copy_all (tests.TestCase_JetstreamJT270M) Testing Jetstream JT270M copy all ... ok test_detect (tests.TestCase_JetstreamJT270M) Testing Jetstream JT270M detect ... ok test_edges (tests.TestCase_JetstreamJT270M) Testing Jetstream JT270M edges ... ok test_settings (tests.TestCase_JetstreamJT270M) Testing Jetstream JT270M settings ... ok test_banks (tests.TestCase_YaesuFT8900) Testing Yaesu FT-8900 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT8900) Testing Yaesu FT-8900 brute force ... ok test_clone (tests.TestCase_YaesuFT8900) Testing Yaesu FT-8900 clone ... ok test_copy_all (tests.TestCase_YaesuFT8900) Testing Yaesu FT-8900 copy all ... ok test_detect (tests.TestCase_YaesuFT8900) Testing Yaesu FT-8900 detect ... ok test_edges (tests.TestCase_YaesuFT8900) Testing Yaesu FT-8900 edges ... ok test_settings (tests.TestCase_YaesuFT8900) Testing Yaesu FT-8900 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_TYTTH9000144) Testing TYT TH9000_144 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TYTTH9000144) Testing TYT TH9000_144 brute force ... ok test_clone (tests.TestCase_TYTTH9000144) Testing TYT TH9000_144 clone ... ok test_copy_all (tests.TestCase_TYTTH9000144) Testing TYT TH9000_144 copy all ... ok test_detect (tests.TestCase_TYTTH9000144) Testing TYT TH9000_144 detect ... ok test_edges (tests.TestCase_TYTTH9000144) Testing TYT TH9000_144 edges ... ok test_settings (tests.TestCase_TYTTH9000144) Testing TYT TH9000_144 settings ... ok test_banks (tests.TestCase_TYTTHUVF1) Testing TYT TH-UVF1 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TYTTHUVF1) Testing TYT TH-UVF1 brute force ... ok test_clone (tests.TestCase_TYTTHUVF1) Testing TYT TH-UVF1 clone ... ok test_copy_all (tests.TestCase_TYTTHUVF1) Testing TYT TH-UVF1 copy all ... ok test_detect (tests.TestCase_TYTTHUVF1) Testing TYT TH-UVF1 detect ... ok test_edges (tests.TestCase_TYTTHUVF1) Testing TYT TH-UVF1 edges ... ok test_settings (tests.TestCase_TYTTHUVF1) Testing TYT TH-UVF1 settings ... ok test_banks (tests.TestCase_YaesuFT2D) Testing Yaesu FT2D banks ... ok test_brute_force (tests.TestCase_YaesuFT2D) Testing Yaesu FT2D brute force ... ok test_clone (tests.TestCase_YaesuFT2D) Testing Yaesu FT2D clone ... ok test_copy_all (tests.TestCase_YaesuFT2D) Testing Yaesu FT2D copy all ... ok test_detect (tests.TestCase_YaesuFT2D) Testing Yaesu FT2D detect ... ok test_edges (tests.TestCase_YaesuFT2D) Testing Yaesu FT2D edges ... ok test_settings (tests.TestCase_YaesuFT2D) Testing Yaesu FT2D settings ... ok test_banks (tests.TestCase_YaesuFT857897US) Testing Yaesu FT-857/897 (US) banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT857897US) Testing Yaesu FT-857/897 (US) brute force ... ok test_clone (tests.TestCase_YaesuFT857897US) Testing Yaesu FT-857/897 (US) clone ... ok test_copy_all (tests.TestCase_YaesuFT857897US) Testing Yaesu FT-857/897 (US) copy all ... ok test_detect (tests.TestCase_YaesuFT857897US) Testing Yaesu FT-857/897 (US) detect ... ok test_edges (tests.TestCase_YaesuFT857897US) Testing Yaesu FT-857/897 (US) edges ... ok test_settings (tests.TestCase_YaesuFT857897US) Testing Yaesu FT-857/897 (US) settings ... ok test_banks (tests.TestCase_YaesuFTM3200D) Testing Yaesu FTM-3200D banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFTM3200D) Testing Yaesu FTM-3200D brute force ... ok test_clone (tests.TestCase_YaesuFTM3200D) Testing Yaesu FTM-3200D clone ... ok test_copy_all (tests.TestCase_YaesuFTM3200D) Testing Yaesu FTM-3200D copy all ... ok test_detect (tests.TestCase_YaesuFTM3200D) Testing Yaesu FTM-3200D detect ... ok test_edges (tests.TestCase_YaesuFTM3200D) Testing Yaesu FTM-3200D edges ... ok test_settings (tests.TestCase_YaesuFTM3200D) Testing Yaesu FTM-3200D settings ... skipped 'Settings not supported' test_banks (tests.TestCase_YaesuFT60) Testing Yaesu FT-60 banks ... ok test_brute_force (tests.TestCase_YaesuFT60) Testing Yaesu FT-60 brute force ... ok test_clone (tests.TestCase_YaesuFT60) Testing Yaesu FT-60 clone ... ok test_copy_all (tests.TestCase_YaesuFT60) Testing Yaesu FT-60 copy all ... ok test_detect (tests.TestCase_YaesuFT60) Testing Yaesu FT-60 detect ... ok test_edges (tests.TestCase_YaesuFT60) Testing Yaesu FT-60 edges ... ok test_settings (tests.TestCase_YaesuFT60) Testing Yaesu FT-60 settings ... ok test_banks (tests.TestCase_IcomIC2100H) Testing Icom IC-2100H banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_IcomIC2100H) Testing Icom IC-2100H brute force ... ok test_clone (tests.TestCase_IcomIC2100H) Testing Icom IC-2100H clone ... ok test_copy_all (tests.TestCase_IcomIC2100H) Testing Icom IC-2100H copy all ... ok test_detect (tests.TestCase_IcomIC2100H) Testing Icom IC-2100H detect ... ok test_edges (tests.TestCase_IcomIC2100H) Testing Icom IC-2100H edges ... ok test_settings (tests.TestCase_IcomIC2100H) Testing Icom IC-2100H settings ... skipped 'Settings not supported' test_banks (tests.TestCase_YaesuFTM350) Testing Yaesu FTM-350 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFTM350) Testing Yaesu FTM-350 brute force ... ok test_clone (tests.TestCase_YaesuFTM350) Testing Yaesu FTM-350 clone ... ok test_copy_all (tests.TestCase_YaesuFTM350) Testing Yaesu FTM-350 copy all ... ok test_detect (tests.TestCase_YaesuFTM350) Testing Yaesu FTM-350 detect ... ok test_edges (tests.TestCase_YaesuFTM350) Testing Yaesu FTM-350 edges ... ok test_settings (tests.TestCase_YaesuFTM350) Testing Yaesu FTM-350 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_LeixenVV898) Testing Leixen VV-898 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_LeixenVV898) Testing Leixen VV-898 brute force ... ok test_clone (tests.TestCase_LeixenVV898) Testing Leixen VV-898 clone ... ok test_copy_all (tests.TestCase_LeixenVV898) Testing Leixen VV-898 copy all ... ok test_detect (tests.TestCase_LeixenVV898) Testing Leixen VV-898 detect ... ok test_edges (tests.TestCase_LeixenVV898) Testing Leixen VV-898 edges ... ok test_settings (tests.TestCase_LeixenVV898) Testing Leixen VV-898 settings ... ok test_banks (tests.TestCase_QYTKT7900D) Testing QYT KT7900D banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_QYTKT7900D) Testing QYT KT7900D brute force ... ok test_clone (tests.TestCase_QYTKT7900D) Testing QYT KT7900D clone ... ok test_copy_all (tests.TestCase_QYTKT7900D) Testing QYT KT7900D copy all ... ok test_detect (tests.TestCase_QYTKT7900D) Testing QYT KT7900D detect ... ok test_edges (tests.TestCase_QYTKT7900D) Testing QYT KT7900D edges ... ok test_settings (tests.TestCase_QYTKT7900D) Testing QYT KT7900D settings ... ok test_banks (tests.TestCase_WouxunKGUVD1P) Testing Wouxun KG-UVD1P banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_WouxunKGUVD1P) Testing Wouxun KG-UVD1P brute force ... ok test_clone (tests.TestCase_WouxunKGUVD1P) Testing Wouxun KG-UVD1P clone ... ok test_copy_all (tests.TestCase_WouxunKGUVD1P) Testing Wouxun KG-UVD1P copy all ... ok test_detect (tests.TestCase_WouxunKGUVD1P) Testing Wouxun KG-UVD1P detect ... ok test_edges (tests.TestCase_WouxunKGUVD1P) Testing Wouxun KG-UVD1P edges ... ok test_settings (tests.TestCase_WouxunKGUVD1P) Testing Wouxun KG-UVD1P settings ... ok test_banks (tests.TestCase_IcomICV82U82) Testing Icom IC-V82/U82 banks ... ok test_brute_force (tests.TestCase_IcomICV82U82) Testing Icom IC-V82/U82 brute force ... ok test_clone (tests.TestCase_IcomICV82U82) Testing Icom IC-V82/U82 clone ... ok test_copy_all (tests.TestCase_IcomICV82U82) Testing Icom IC-V82/U82 copy all ... ok test_detect (tests.TestCase_IcomICV82U82) Testing Icom IC-V82/U82 detect ... ok test_edges (tests.TestCase_IcomICV82U82) Testing Icom IC-V82/U82 edges ... ok test_settings (tests.TestCase_IcomICV82U82) Testing Icom IC-V82/U82 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_IcomICW32A) Testing Icom IC-W32A banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_IcomICW32A) Testing Icom IC-W32A brute force ... ok test_clone (tests.TestCase_IcomICW32A) Testing Icom IC-W32A clone ... ok test_copy_all (tests.TestCase_IcomICW32A) Testing Icom IC-W32A copy all ... ok test_detect (tests.TestCase_IcomICW32A) Testing Icom IC-W32A detect ... ok test_edges (tests.TestCase_IcomICW32A) Testing Icom IC-W32A edges ... ok test_settings (tests.TestCase_IcomICW32A) Testing Icom IC-W32A settings ... skipped 'Settings not supported' test_banks (tests.TestCase_YaesuVX3) Testing Yaesu VX-3 banks ... ok test_brute_force (tests.TestCase_YaesuVX3) Testing Yaesu VX-3 brute force ... ok test_clone (tests.TestCase_YaesuVX3) Testing Yaesu VX-3 clone ... ok test_copy_all (tests.TestCase_YaesuVX3) Testing Yaesu VX-3 copy all ... ok test_detect (tests.TestCase_YaesuVX3) Testing Yaesu VX-3 detect ... ok test_edges (tests.TestCase_YaesuVX3) Testing Yaesu VX-3 edges ... ok test_settings (tests.TestCase_YaesuVX3) Testing Yaesu VX-3 settings ... ok test_banks (tests.TestCase_FeidaxinFD268B) Testing Feidaxin FD-268B banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_FeidaxinFD268B) Testing Feidaxin FD-268B brute force ... ok test_clone (tests.TestCase_FeidaxinFD268B) Testing Feidaxin FD-268B clone ... ok test_copy_all (tests.TestCase_FeidaxinFD268B) Testing Feidaxin FD-268B copy all ... ok test_detect (tests.TestCase_FeidaxinFD268B) Testing Feidaxin FD-268B detect ... ok test_edges (tests.TestCase_FeidaxinFD268B) Testing Feidaxin FD-268B edges ... ok test_settings (tests.TestCase_FeidaxinFD268B) Testing Feidaxin FD-268B settings ... ok test_banks (tests.TestCase_BaofengUV5R) Testing Baofeng UV-5R banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BaofengUV5R) Testing Baofeng UV-5R brute force ... ok test_clone (tests.TestCase_BaofengUV5R) Testing Baofeng UV-5R clone ... ok test_copy_all (tests.TestCase_BaofengUV5R) Testing Baofeng UV-5R copy all ... ok test_detect (tests.TestCase_BaofengUV5R) Testing Baofeng UV-5R detect ... ok test_edges (tests.TestCase_BaofengUV5R) Testing Baofeng UV-5R edges ... ok test_settings (tests.TestCase_BaofengUV5R) Testing Baofeng UV-5R settings ... ok test_banks (tests.TestCase_BaofengUVB5) Testing Baofeng UV-B5 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BaofengUVB5) Testing Baofeng UV-B5 brute force ... ok test_clone (tests.TestCase_BaofengUVB5) Testing Baofeng UV-B5 clone ... ok test_copy_all (tests.TestCase_BaofengUVB5) Testing Baofeng UV-B5 copy all ... ok test_detect (tests.TestCase_BaofengUVB5) Testing Baofeng UV-B5 detect ... ok test_edges (tests.TestCase_BaofengUVB5) Testing Baofeng UV-B5 edges ... ok test_settings (tests.TestCase_BaofengUVB5) Testing Baofeng UV-B5 settings ... ok test_banks (tests.TestCase_BaofengBF888) Testing Baofeng BF-888 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BaofengBF888) Testing Baofeng BF-888 brute force ... ok test_clone (tests.TestCase_BaofengBF888) Testing Baofeng BF-888 clone ... ok test_copy_all (tests.TestCase_BaofengBF888) Testing Baofeng BF-888 copy all ... ok test_detect (tests.TestCase_BaofengBF888) Testing Baofeng BF-888 detect ... ok test_edges (tests.TestCase_BaofengBF888) Testing Baofeng BF-888 edges ... ok test_settings (tests.TestCase_BaofengBF888) Testing Baofeng BF-888 settings ... ok test_banks (tests.TestCase_LUITONLT725UV) Testing LUITON LT-725UV banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_LUITONLT725UV) Testing LUITON LT-725UV brute force ... ok test_clone (tests.TestCase_LUITONLT725UV) Testing LUITON LT-725UV clone ... ok test_copy_all (tests.TestCase_LUITONLT725UV) Testing LUITON LT-725UV copy all ... ok test_detect (tests.TestCase_LUITONLT725UV) Testing LUITON LT-725UV detect ... ok test_edges (tests.TestCase_LUITONLT725UV) Testing LUITON LT-725UV edges ... ok test_settings (tests.TestCase_LUITONLT725UV) Testing LUITON LT-725UV settings ... ok test_banks (tests.TestCase_YaesuFT817) Testing Yaesu FT-817 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT817) Testing Yaesu FT-817 brute force ... ok test_clone (tests.TestCase_YaesuFT817) Testing Yaesu FT-817 clone ... ok test_copy_all (tests.TestCase_YaesuFT817) Testing Yaesu FT-817 copy all ... ok test_detect (tests.TestCase_YaesuFT817) Testing Yaesu FT-817 detect ... ok test_edges (tests.TestCase_YaesuFT817) Testing Yaesu FT-817 edges ... ok test_settings (tests.TestCase_YaesuFT817) Testing Yaesu FT-817 settings ... ok test_banks (tests.TestCase_PolmarDB50M) Testing Polmar DB-50M banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_PolmarDB50M) Testing Polmar DB-50M brute force ... ok test_clone (tests.TestCase_PolmarDB50M) Testing Polmar DB-50M clone ... ok test_copy_all (tests.TestCase_PolmarDB50M) Testing Polmar DB-50M copy all ... ok test_detect (tests.TestCase_PolmarDB50M) Testing Polmar DB-50M detect ... ok test_edges (tests.TestCase_PolmarDB50M) Testing Polmar DB-50M edges ... ok test_settings (tests.TestCase_PolmarDB50M) Testing Polmar DB-50M settings ... ok test_banks (tests.TestCase_KYDNC630A) Testing KYD NC-630A banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_KYDNC630A) Testing KYD NC-630A brute force ... ok test_clone (tests.TestCase_KYDNC630A) Testing KYD NC-630A clone ... ok test_copy_all (tests.TestCase_KYDNC630A) Testing KYD NC-630A copy all ... ok test_detect (tests.TestCase_KYDNC630A) Testing KYD NC-630A detect ... ok test_edges (tests.TestCase_KYDNC630A) Testing KYD NC-630A edges ... ok test_settings (tests.TestCase_KYDNC630A) Testing KYD NC-630A settings ... ok test_banks (tests.TestCase_BTECHUV5X3) Testing BTECH UV-5X3 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHUV5X3) Testing BTECH UV-5X3 brute force ... ok test_clone (tests.TestCase_BTECHUV5X3) Testing BTECH UV-5X3 clone ... ok test_copy_all (tests.TestCase_BTECHUV5X3) Testing BTECH UV-5X3 copy all ... ok test_detect (tests.TestCase_BTECHUV5X3) Testing BTECH UV-5X3 detect ... ok test_edges (tests.TestCase_BTECHUV5X3) Testing BTECH UV-5X3 edges ... ok test_settings (tests.TestCase_BTECHUV5X3) Testing BTECH UV-5X3 settings ... ok test_banks (tests.TestCase_BTECHUV50X3) Testing BTECH UV-50X3 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHUV50X3) Testing BTECH UV-50X3 brute force ... ok test_clone (tests.TestCase_BTECHUV50X3) Testing BTECH UV-50X3 clone ... ok test_copy_all (tests.TestCase_BTECHUV50X3) Testing BTECH UV-50X3 copy all ... ok test_detect (tests.TestCase_BTECHUV50X3) Testing BTECH UV-50X3 detect ... ok test_edges (tests.TestCase_BTECHUV50X3) Testing BTECH UV-50X3 edges ... ok test_settings (tests.TestCase_BTECHUV50X3) Testing BTECH UV-50X3 settings ... ok test_banks (tests.TestCase_VertexStandardVXA700) Testing Vertex Standard VXA-700 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_VertexStandardVXA700) Testing Vertex Standard VXA-700 brute force ... ok test_clone (tests.TestCase_VertexStandardVXA700) Testing Vertex Standard VXA-700 clone ... ok test_copy_all (tests.TestCase_VertexStandardVXA700) Testing Vertex Standard VXA-700 copy all ... ok test_detect (tests.TestCase_VertexStandardVXA700) Testing Vertex Standard VXA-700 detect ... ok test_edges (tests.TestCase_VertexStandardVXA700) Testing Vertex Standard VXA-700 edges ... ok test_settings (tests.TestCase_VertexStandardVXA700) Testing Vertex Standard VXA-700 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_YaesuFT1802M) Testing Yaesu FT-1802M banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT1802M) Testing Yaesu FT-1802M brute force ... ok test_clone (tests.TestCase_YaesuFT1802M) Testing Yaesu FT-1802M clone ... ok test_copy_all (tests.TestCase_YaesuFT1802M) Testing Yaesu FT-1802M copy all ... ok test_detect (tests.TestCase_YaesuFT1802M) Testing Yaesu FT-1802M detect ... ok test_edges (tests.TestCase_YaesuFT1802M) Testing Yaesu FT-1802M edges ... ok test_settings (tests.TestCase_YaesuFT1802M) Testing Yaesu FT-1802M settings ... skipped 'Settings not supported' test_banks (tests.TestCase_IcomIC2720H) Testing Icom IC-2720H banks ... ok test_brute_force (tests.TestCase_IcomIC2720H) Testing Icom IC-2720H brute force ... ok test_clone (tests.TestCase_IcomIC2720H) Testing Icom IC-2720H clone ... ok test_copy_all (tests.TestCase_IcomIC2720H) Testing Icom IC-2720H copy all ... ok test_detect (tests.TestCase_IcomIC2720H) Testing Icom IC-2720H detect ... ok test_edges (tests.TestCase_IcomIC2720H) Testing Icom IC-2720H edges ... ok test_settings (tests.TestCase_IcomIC2720H) Testing Icom IC-2720H settings ... skipped 'Settings not supported' test_banks (tests.TestCase_YaesuFT818) Testing Yaesu FT-818 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT818) Testing Yaesu FT-818 brute force ... ok test_clone (tests.TestCase_YaesuFT818) Testing Yaesu FT-818 clone ... ok test_copy_all (tests.TestCase_YaesuFT818) Testing Yaesu FT-818 copy all ... ok test_detect (tests.TestCase_YaesuFT818) Testing Yaesu FT-818 detect ... ok test_edges (tests.TestCase_YaesuFT818) Testing Yaesu FT-818 edges ... ok test_settings (tests.TestCase_YaesuFT818) Testing Yaesu FT-818 settings ... ok test_banks (tests.TestCase_BTECHUV25X4) Testing BTECH UV-25X4 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHUV25X4) Testing BTECH UV-25X4 brute force ... ok test_clone (tests.TestCase_BTECHUV25X4) Testing BTECH UV-25X4 clone ... ok test_copy_all (tests.TestCase_BTECHUV25X4) Testing BTECH UV-25X4 copy all ... ok test_detect (tests.TestCase_BTECHUV25X4) Testing BTECH UV-25X4 detect ... ok test_edges (tests.TestCase_BTECHUV25X4) Testing BTECH UV-25X4 edges ... ok test_settings (tests.TestCase_BTECHUV25X4) Testing BTECH UV-25X4 settings ... ok test_banks (tests.TestCase_IcomID51) Testing Icom ID-51 banks ... ok test_brute_force (tests.TestCase_IcomID51) Testing Icom ID-51 brute force ... ok test_clone (tests.TestCase_IcomID51) Testing Icom ID-51 clone ... ok test_copy_all (tests.TestCase_IcomID51) Testing Icom ID-51 copy all ... ok test_detect (tests.TestCase_IcomID51) Testing Icom ID-51 detect ... ok test_edges (tests.TestCase_IcomID51) Testing Icom ID-51 edges ... ok test_settings (tests.TestCase_IcomID51) Testing Icom ID-51 settings ... ok test_banks (tests.TestCase_KenwoodTHD72clonemode) Testing Kenwood TH-D72 (clone mode) banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_KenwoodTHD72clonemode) Testing Kenwood TH-D72 (clone mode) brute force ... ok test_clone (tests.TestCase_KenwoodTHD72clonemode) Testing Kenwood TH-D72 (clone mode) clone ... ok test_copy_all (tests.TestCase_KenwoodTHD72clonemode) Testing Kenwood TH-D72 (clone mode) copy all ... ok test_detect (tests.TestCase_KenwoodTHD72clonemode) Testing Kenwood TH-D72 (clone mode) detect ... ok test_edges (tests.TestCase_KenwoodTHD72clonemode) Testing Kenwood TH-D72 (clone mode) edges ... ok test_settings (tests.TestCase_KenwoodTHD72clonemode) Testing Kenwood TH-D72 (clone mode) settings ... ok test_banks (tests.TestCase_YaesuVX8DR) Testing Yaesu VX-8DR banks ... ok test_brute_force (tests.TestCase_YaesuVX8DR) Testing Yaesu VX-8DR brute force ... ok test_clone (tests.TestCase_YaesuVX8DR) Testing Yaesu VX-8DR clone ... ok test_copy_all (tests.TestCase_YaesuVX8DR) Testing Yaesu VX-8DR copy all ... ok test_detect (tests.TestCase_YaesuVX8DR) Testing Yaesu VX-8DR detect ... ok test_edges (tests.TestCase_YaesuVX8DR) Testing Yaesu VX-8DR edges ... ok test_settings (tests.TestCase_YaesuVX8DR) Testing Yaesu VX-8DR settings ... ok test_banks (tests.TestCase_RadtelT18) Testing Radtel T18 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RadtelT18) Testing Radtel T18 brute force ... ok test_clone (tests.TestCase_RadtelT18) Testing Radtel T18 clone ... ok test_copy_all (tests.TestCase_RadtelT18) Testing Radtel T18 copy all ... ok test_detect (tests.TestCase_RadtelT18) Testing Radtel T18 detect ... ok test_edges (tests.TestCase_RadtelT18) Testing Radtel T18 edges ... ok test_settings (tests.TestCase_RadtelT18) Testing Radtel T18 settings ... ok test_banks (tests.TestCase_BaofengF11) Testing Baofeng F-11 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BaofengF11) Testing Baofeng F-11 brute force ... ok test_clone (tests.TestCase_BaofengF11) Testing Baofeng F-11 clone ... ok test_copy_all (tests.TestCase_BaofengF11) Testing Baofeng F-11 copy all ... ok test_detect (tests.TestCase_BaofengF11) Testing Baofeng F-11 detect ... ok test_edges (tests.TestCase_BaofengF11) Testing Baofeng F-11 edges ... ok test_settings (tests.TestCase_BaofengF11) Testing Baofeng F-11 settings ... ok test_banks (tests.TestCase_FeidaxinFD268A) Testing Feidaxin FD-268A banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_FeidaxinFD268A) Testing Feidaxin FD-268A brute force ... ok test_clone (tests.TestCase_FeidaxinFD268A) Testing Feidaxin FD-268A clone ... ok test_copy_all (tests.TestCase_FeidaxinFD268A) Testing Feidaxin FD-268A copy all ... ok test_detect (tests.TestCase_FeidaxinFD268A) Testing Feidaxin FD-268A detect ... ok test_edges (tests.TestCase_FeidaxinFD268A) Testing Feidaxin FD-268A edges ... ok test_settings (tests.TestCase_FeidaxinFD268A) Testing Feidaxin FD-268A settings ... ok test_banks (tests.TestCase_AlincoDJ175) Testing Alinco DJ175 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_AlincoDJ175) Testing Alinco DJ175 brute force ... ok test_clone (tests.TestCase_AlincoDJ175) Testing Alinco DJ175 clone ... ok test_copy_all (tests.TestCase_AlincoDJ175) Testing Alinco DJ175 copy all ... ok test_detect (tests.TestCase_AlincoDJ175) Testing Alinco DJ175 detect ... ok test_edges (tests.TestCase_AlincoDJ175) Testing Alinco DJ175 edges ... ok test_settings (tests.TestCase_AlincoDJ175) Testing Alinco DJ175 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_BTECHGMRSV1) Testing BTECH GMRS-V1 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHGMRSV1) Testing BTECH GMRS-V1 brute force ... ok test_clone (tests.TestCase_BTECHGMRSV1) Testing BTECH GMRS-V1 clone ... ok test_copy_all (tests.TestCase_BTECHGMRSV1) Testing BTECH GMRS-V1 copy all ... ok test_detect (tests.TestCase_BTECHGMRSV1) Testing BTECH GMRS-V1 detect ... ok test_edges (tests.TestCase_BTECHGMRSV1) Testing BTECH GMRS-V1 edges ... ok test_settings (tests.TestCase_BTECHGMRSV1) Testing BTECH GMRS-V1 settings ... ok test_banks (tests.TestCase_RetevisRT22) Testing Retevis RT22 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RetevisRT22) Testing Retevis RT22 brute force ... ok test_clone (tests.TestCase_RetevisRT22) Testing Retevis RT22 clone ... ok test_copy_all (tests.TestCase_RetevisRT22) Testing Retevis RT22 copy all ... ok test_detect (tests.TestCase_RetevisRT22) Testing Retevis RT22 detect ... ok test_edges (tests.TestCase_RetevisRT22) Testing Retevis RT22 edges ... ok test_settings (tests.TestCase_RetevisRT22) Testing Retevis RT22 settings ... ok test_banks (tests.TestCase_YaesuVX8R) Testing Yaesu VX-8R banks ... ok test_brute_force (tests.TestCase_YaesuVX8R) Testing Yaesu VX-8R brute force ... ok test_clone (tests.TestCase_YaesuVX8R) Testing Yaesu VX-8R clone ... ok test_copy_all (tests.TestCase_YaesuVX8R) Testing Yaesu VX-8R copy all ... ok test_detect (tests.TestCase_YaesuVX8R) Testing Yaesu VX-8R detect ... ok test_edges (tests.TestCase_YaesuVX8R) Testing Yaesu VX-8R edges ... ok test_settings (tests.TestCase_YaesuVX8R) Testing Yaesu VX-8R settings ... ok test_banks (tests.TestCase_AlincoDJG7EG) Testing Alinco DJ-G7EG banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_AlincoDJG7EG) Testing Alinco DJ-G7EG brute force ... ok test_clone (tests.TestCase_AlincoDJG7EG) Testing Alinco DJ-G7EG clone ... ok test_copy_all (tests.TestCase_AlincoDJG7EG) Testing Alinco DJ-G7EG copy all ... ok test_detect (tests.TestCase_AlincoDJG7EG) Testing Alinco DJ-G7EG detect ... ok test_edges (tests.TestCase_AlincoDJG7EG) Testing Alinco DJ-G7EG edges ... ok test_settings (tests.TestCase_AlincoDJG7EG) Testing Alinco DJ-G7EG settings ... skipped 'Settings not supported' test_banks (tests.TestCase_LeixenVV898S) Testing Leixen VV-898S banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_LeixenVV898S) Testing Leixen VV-898S brute force ... ok test_clone (tests.TestCase_LeixenVV898S) Testing Leixen VV-898S clone ... ok test_copy_all (tests.TestCase_LeixenVV898S) Testing Leixen VV-898S copy all ... ok test_detect (tests.TestCase_LeixenVV898S) Testing Leixen VV-898S detect ... ok test_edges (tests.TestCase_LeixenVV898S) Testing Leixen VV-898S edges ... ok test_settings (tests.TestCase_LeixenVV898S) Testing Leixen VV-898S settings ... ok test_banks (tests.TestCase_KYDIP620) Testing KYD IP-620 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_KYDIP620) Testing KYD IP-620 brute force ... ok test_clone (tests.TestCase_KYDIP620) Testing KYD IP-620 clone ... ok test_copy_all (tests.TestCase_KYDIP620) Testing KYD IP-620 copy all ... ok test_detect (tests.TestCase_KYDIP620) Testing KYD IP-620 detect ... ok test_edges (tests.TestCase_KYDIP620) Testing KYD IP-620 edges ... ok test_settings (tests.TestCase_KYDIP620) Testing KYD IP-620 settings ... ok test_banks (tests.TestCase_YaesuFT78007900) Testing Yaesu FT-7800/7900 banks ... ok test_brute_force (tests.TestCase_YaesuFT78007900) Testing Yaesu FT-7800/7900 brute force ... ok test_clone (tests.TestCase_YaesuFT78007900) Testing Yaesu FT-7800/7900 clone ... ok test_copy_all (tests.TestCase_YaesuFT78007900) Testing Yaesu FT-7800/7900 copy all ... ok test_detect (tests.TestCase_YaesuFT78007900) Testing Yaesu FT-7800/7900 detect ... ok test_edges (tests.TestCase_YaesuFT78007900) Testing Yaesu FT-7800/7900 edges ... ok test_settings (tests.TestCase_YaesuFT78007900) Testing Yaesu FT-7800/7900 settings ... ok test_banks (tests.TestCase_YaesuVX2) Testing Yaesu VX-2 banks ... ok test_brute_force (tests.TestCase_YaesuVX2) Testing Yaesu VX-2 brute force ... ok test_clone (tests.TestCase_YaesuVX2) Testing Yaesu VX-2 clone ... ok test_copy_all (tests.TestCase_YaesuVX2) Testing Yaesu VX-2 copy all ... ok test_detect (tests.TestCase_YaesuVX2) Testing Yaesu VX-2 detect ... ok test_edges (tests.TestCase_YaesuVX2) Testing Yaesu VX-2 edges ... ok test_settings (tests.TestCase_YaesuVX2) Testing Yaesu VX-2 settings ... ok test_banks (tests.TestCase_WouxunKGUV8DPlus) Testing Wouxun KG-UV8D Plus banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_WouxunKGUV8DPlus) Testing Wouxun KG-UV8D Plus brute force ... ok test_clone (tests.TestCase_WouxunKGUV8DPlus) Testing Wouxun KG-UV8D Plus clone ... ok test_copy_all (tests.TestCase_WouxunKGUV8DPlus) Testing Wouxun KG-UV8D Plus copy all ... ok test_detect (tests.TestCase_WouxunKGUV8DPlus) Testing Wouxun KG-UV8D Plus detect ... ok test_edges (tests.TestCase_WouxunKGUV8DPlus) Testing Wouxun KG-UV8D Plus edges ... ok test_settings (tests.TestCase_WouxunKGUV8DPlus) Testing Wouxun KG-UV8D Plus settings ... ok test_banks (tests.TestCase_WouxunKGUV8D) Testing Wouxun KG-UV8D banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_WouxunKGUV8D) Testing Wouxun KG-UV8D brute force ... ok test_clone (tests.TestCase_WouxunKGUV8D) Testing Wouxun KG-UV8D clone ... ok test_copy_all (tests.TestCase_WouxunKGUV8D) Testing Wouxun KG-UV8D copy all ... ok test_detect (tests.TestCase_WouxunKGUV8D) Testing Wouxun KG-UV8D detect ... ok test_edges (tests.TestCase_WouxunKGUV8D) Testing Wouxun KG-UV8D edges ... ok test_settings (tests.TestCase_WouxunKGUV8D) Testing Wouxun KG-UV8D settings ... ok test_banks (tests.TestCase_KenwoodTK272G) Testing Kenwood TK-272G banks ... ok test_brute_force (tests.TestCase_KenwoodTK272G) Testing Kenwood TK-272G brute force ... ok test_clone (tests.TestCase_KenwoodTK272G) Testing Kenwood TK-272G clone ... ok test_copy_all (tests.TestCase_KenwoodTK272G) Testing Kenwood TK-272G copy all ... ok test_detect (tests.TestCase_KenwoodTK272G) Testing Kenwood TK-272G detect ... ok test_edges (tests.TestCase_KenwoodTK272G) Testing Kenwood TK-272G edges ... ok test_settings (tests.TestCase_KenwoodTK272G) Testing Kenwood TK-272G settings ... ok test_banks (tests.TestCase_QYTKT8900D) Testing QYT KT8900D banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_QYTKT8900D) Testing QYT KT8900D brute force ... ok test_clone (tests.TestCase_QYTKT8900D) Testing QYT KT8900D clone ... ok test_copy_all (tests.TestCase_QYTKT8900D) Testing QYT KT8900D copy all ... ok test_detect (tests.TestCase_QYTKT8900D) Testing QYT KT8900D detect ... ok test_edges (tests.TestCase_QYTKT8900D) Testing QYT KT8900D edges ... ok test_settings (tests.TestCase_QYTKT8900D) Testing QYT KT8900D settings ... ok test_banks (tests.TestCase_KenwoodTK760G) Testing Kenwood TK-760G banks ... ok test_brute_force (tests.TestCase_KenwoodTK760G) Testing Kenwood TK-760G brute force ... ok test_clone (tests.TestCase_KenwoodTK760G) Testing Kenwood TK-760G clone ... ok test_copy_all (tests.TestCase_KenwoodTK760G) Testing Kenwood TK-760G copy all ... ok test_detect (tests.TestCase_KenwoodTK760G) Testing Kenwood TK-760G detect ... ok test_edges (tests.TestCase_KenwoodTK760G) Testing Kenwood TK-760G edges ... ok test_settings (tests.TestCase_KenwoodTK760G) Testing Kenwood TK-760G settings ... ok test_banks (tests.TestCase_YaesuVX6) Testing Yaesu VX-6 banks ... ok test_brute_force (tests.TestCase_YaesuVX6) Testing Yaesu VX-6 brute force ... ok test_clone (tests.TestCase_YaesuVX6) Testing Yaesu VX-6 clone ... ok test_copy_all (tests.TestCase_YaesuVX6) Testing Yaesu VX-6 copy all ... ok test_detect (tests.TestCase_YaesuVX6) Testing Yaesu VX-6 detect ... ok test_edges (tests.TestCase_YaesuVX6) Testing Yaesu VX-6 edges ... ok test_settings (tests.TestCase_YaesuVX6) Testing Yaesu VX-6 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_IcomIC208H) Testing Icom IC-208H banks ... ok test_brute_force (tests.TestCase_IcomIC208H) Testing Icom IC-208H brute force ... ok test_clone (tests.TestCase_IcomIC208H) Testing Icom IC-208H clone ... ok test_copy_all (tests.TestCase_IcomIC208H) Testing Icom IC-208H copy all ... ok test_detect (tests.TestCase_IcomIC208H) Testing Icom IC-208H detect ... ok test_edges (tests.TestCase_IcomIC208H) Testing Icom IC-208H edges ... ok test_settings (tests.TestCase_IcomIC208H) Testing Icom IC-208H settings ... skipped 'Settings not supported' test_banks (tests.TestCase_IcomID31A) Testing Icom ID-31A banks ... ok test_brute_force (tests.TestCase_IcomID31A) Testing Icom ID-31A brute force ... ok test_clone (tests.TestCase_IcomID31A) Testing Icom ID-31A clone ... ok test_copy_all (tests.TestCase_IcomID31A) Testing Icom ID-31A copy all ... ok test_detect (tests.TestCase_IcomID31A) Testing Icom ID-31A detect ... ok test_edges (tests.TestCase_IcomID31A) Testing Icom ID-31A edges ... ok test_settings (tests.TestCase_IcomID31A) Testing Icom ID-31A settings ... ok test_banks (tests.TestCase_TYTTH7800) Testing TYT TH-7800 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TYTTH7800) Testing TYT TH-7800 brute force ... ok test_clone (tests.TestCase_TYTTH7800) Testing TYT TH-7800 clone ... ok test_copy_all (tests.TestCase_TYTTH7800) Testing TYT TH-7800 copy all ... ok test_detect (tests.TestCase_TYTTH7800) Testing TYT TH-7800 detect ... ok test_edges (tests.TestCase_TYTTH7800) Testing TYT TH-7800 edges ... ok test_settings (tests.TestCase_TYTTH7800) Testing TYT TH-7800 settings ... ok test_banks (tests.TestCase_IcomIC2200H) Testing Icom IC-2200H banks ... ok test_brute_force (tests.TestCase_IcomIC2200H) Testing Icom IC-2200H brute force ... ok test_clone (tests.TestCase_IcomIC2200H) Testing Icom IC-2200H clone ... ok test_copy_all (tests.TestCase_IcomIC2200H) Testing Icom IC-2200H copy all ... ok test_detect (tests.TestCase_IcomIC2200H) Testing Icom IC-2200H detect ... ok test_edges (tests.TestCase_IcomIC2200H) Testing Icom IC-2200H edges ... ok test_settings (tests.TestCase_IcomIC2200H) Testing Icom IC-2200H settings ... ok test_banks (tests.TestCase_PuxingPX888K) Testing Puxing PX-888K banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_PuxingPX888K) Testing Puxing PX-888K brute force ... ok test_clone (tests.TestCase_PuxingPX888K) Testing Puxing PX-888K clone ... ok test_copy_all (tests.TestCase_PuxingPX888K) Testing Puxing PX-888K copy all ... ok test_detect (tests.TestCase_PuxingPX888K) Testing Puxing PX-888K detect ... ok test_edges (tests.TestCase_PuxingPX888K) Testing Puxing PX-888K edges ... ok test_settings (tests.TestCase_PuxingPX888K) Testing Puxing PX-888K settings ... ok test_banks (tests.TestCase_YaesuFT857897) Testing Yaesu FT-857/897 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT857897) Testing Yaesu FT-857/897 brute force ... ok test_clone (tests.TestCase_YaesuFT857897) Testing Yaesu FT-857/897 clone ... ok test_copy_all (tests.TestCase_YaesuFT857897) Testing Yaesu FT-857/897 copy all ... ok test_detect (tests.TestCase_YaesuFT857897) Testing Yaesu FT-857/897 detect ... ok test_edges (tests.TestCase_YaesuFT857897) Testing Yaesu FT-857/897 edges ... ok test_settings (tests.TestCase_YaesuFT857897) Testing Yaesu FT-857/897 settings ... ok test_banks (tests.TestCase_IcomIC2730A) Testing Icom IC-2730A banks ... ok test_brute_force (tests.TestCase_IcomIC2730A) Testing Icom IC-2730A brute force ... ok test_clone (tests.TestCase_IcomIC2730A) Testing Icom IC-2730A clone ... ok test_copy_all (tests.TestCase_IcomIC2730A) Testing Icom IC-2730A copy all ... ok test_detect (tests.TestCase_IcomIC2730A) Testing Icom IC-2730A detect ... ok test_edges (tests.TestCase_IcomIC2730A) Testing Icom IC-2730A edges ... ok test_settings (tests.TestCase_IcomIC2730A) Testing Icom IC-2730A settings ... ok test_banks (tests.TestCase_AnyToneOBLTR8R) Testing AnyTone OBLTR-8R banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_AnyToneOBLTR8R) Testing AnyTone OBLTR-8R brute force ... ok test_clone (tests.TestCase_AnyToneOBLTR8R) Testing AnyTone OBLTR-8R clone ... ok test_copy_all (tests.TestCase_AnyToneOBLTR8R) Testing AnyTone OBLTR-8R copy all ... ok test_detect (tests.TestCase_AnyToneOBLTR8R) Testing AnyTone OBLTR-8R detect ... ok test_edges (tests.TestCase_AnyToneOBLTR8R) Testing AnyTone OBLTR-8R edges ... ok test_settings (tests.TestCase_AnyToneOBLTR8R) Testing AnyTone OBLTR-8R settings ... ok test_banks (tests.TestCase_WouxunKG816) Testing Wouxun KG-816 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_WouxunKG816) Testing Wouxun KG-816 brute force ... ok test_clone (tests.TestCase_WouxunKG816) Testing Wouxun KG-816 clone ... ok test_copy_all (tests.TestCase_WouxunKG816) Testing Wouxun KG-816 copy all ... ok test_detect (tests.TestCase_WouxunKG816) Testing Wouxun KG-816 detect ... ok test_edges (tests.TestCase_WouxunKG816) Testing Wouxun KG-816 edges ... ok test_settings (tests.TestCase_WouxunKG816) Testing Wouxun KG-816 settings ... ok test_banks (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 banks ... ERROR test_brute_force (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 brute force ... ok test_clone (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 clone ... ok test_copy_all (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 copy all ... ok test_detect (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 detect ... ok test_edges (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 edges ... ok test_settings (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_IcomICQ7A) Testing Icom IC-Q7A banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_IcomICQ7A) Testing Icom IC-Q7A brute force ... ok test_clone (tests.TestCase_IcomICQ7A) Testing Icom IC-Q7A clone ... ok test_copy_all (tests.TestCase_IcomICQ7A) Testing Icom IC-Q7A copy all ... ok test_detect (tests.TestCase_IcomICQ7A) Testing Icom IC-Q7A detect ... ok test_edges (tests.TestCase_IcomICQ7A) Testing Icom IC-Q7A edges ... ok test_settings (tests.TestCase_IcomICQ7A) Testing Icom IC-Q7A settings ... ok test_banks (tests.TestCase_YaesuVX8GE) Testing Yaesu VX-8GE banks ... ok test_brute_force (tests.TestCase_YaesuVX8GE) Testing Yaesu VX-8GE brute force ... ok test_clone (tests.TestCase_YaesuVX8GE) Testing Yaesu VX-8GE clone ... ok test_copy_all (tests.TestCase_YaesuVX8GE) Testing Yaesu VX-8GE copy all ... ok test_detect (tests.TestCase_YaesuVX8GE) Testing Yaesu VX-8GE detect ... ok test_edges (tests.TestCase_YaesuVX8GE) Testing Yaesu VX-8GE edges ... ok test_settings (tests.TestCase_YaesuVX8GE) Testing Yaesu VX-8GE settings ... ok test_banks (tests.TestCase_IcomICT70) Testing Icom IC-T70 banks ... ok test_brute_force (tests.TestCase_IcomICT70) Testing Icom IC-T70 brute force ... ok test_clone (tests.TestCase_IcomICT70) Testing Icom IC-T70 clone ... ok test_copy_all (tests.TestCase_IcomICT70) Testing Icom IC-T70 copy all ... ok test_detect (tests.TestCase_IcomICT70) Testing Icom IC-T70 detect ... ok test_edges (tests.TestCase_IcomICT70) Testing Icom IC-T70 edges ... ok test_settings (tests.TestCase_IcomICT70) Testing Icom IC-T70 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_TYTTHUV3R) Testing TYT TH-UV3R banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TYTTHUV3R) Testing TYT TH-UV3R brute force ... ok test_clone (tests.TestCase_TYTTHUV3R) Testing TYT TH-UV3R clone ... ok test_copy_all (tests.TestCase_TYTTHUV3R) Testing TYT TH-UV3R copy all ... ok test_detect (tests.TestCase_TYTTHUV3R) Testing TYT TH-UV3R detect ... ok test_edges (tests.TestCase_TYTTHUV3R) Testing TYT TH-UV3R edges ... ok test_settings (tests.TestCase_TYTTHUV3R) Testing TYT TH-UV3R settings ... skipped 'Settings not supported' test_banks (tests.TestCase_YaesuFT1D) Testing Yaesu FT-1D banks ... ok test_brute_force (tests.TestCase_YaesuFT1D) Testing Yaesu FT-1D brute force ... ok test_clone (tests.TestCase_YaesuFT1D) Testing Yaesu FT-1D clone ... ok test_copy_all (tests.TestCase_YaesuFT1D) Testing Yaesu FT-1D copy all ... ok test_detect (tests.TestCase_YaesuFT1D) Testing Yaesu FT-1D detect ... ok test_edges (tests.TestCase_YaesuFT1D) Testing Yaesu FT-1D edges ... ok test_settings (tests.TestCase_YaesuFT1D) Testing Yaesu FT-1D settings ... ok test_banks (tests.TestCase_RetevisRT23) Testing Retevis RT23 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RetevisRT23) Testing Retevis RT23 brute force ... ok test_clone (tests.TestCase_RetevisRT23) Testing Retevis RT23 clone ... ok test_copy_all (tests.TestCase_RetevisRT23) Testing Retevis RT23 copy all ... ok test_detect (tests.TestCase_RetevisRT23) Testing Retevis RT23 detect ... ok test_edges (tests.TestCase_RetevisRT23) Testing Retevis RT23 edges ... ok test_settings (tests.TestCase_RetevisRT23) Testing Retevis RT23 settings ... ok test_banks (tests.TestCase_PuxingPX777) Testing Puxing PX-777 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_PuxingPX777) Testing Puxing PX-777 brute force ... ok test_clone (tests.TestCase_PuxingPX777) Testing Puxing PX-777 clone ... ok test_copy_all (tests.TestCase_PuxingPX777) Testing Puxing PX-777 copy all ... ok test_detect (tests.TestCase_PuxingPX777) Testing Puxing PX-777 detect ... ok test_edges (tests.TestCase_PuxingPX777) Testing Puxing PX-777 edges ... ok test_settings (tests.TestCase_PuxingPX777) Testing Puxing PX-777 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_IcomID800H) Testing Icom ID-800H banks ... ok test_brute_force (tests.TestCase_IcomID800H) Testing Icom ID-800H brute force ... ok test_clone (tests.TestCase_IcomID800H) Testing Icom ID-800H clone ... ok test_copy_all (tests.TestCase_IcomID800H) Testing Icom ID-800H copy all ... ok test_detect (tests.TestCase_IcomID800H) Testing Icom ID-800H detect ... ok test_edges (tests.TestCase_IcomID800H) Testing Icom ID-800H edges ... ok test_settings (tests.TestCase_IcomID800H) Testing Icom ID-800H settings ... ok test_banks (tests.TestCase_AlincoDR235T) Testing Alinco DR235T banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_AlincoDR235T) Testing Alinco DR235T brute force ... ok test_clone (tests.TestCase_AlincoDR235T) Testing Alinco DR235T clone ... ok test_copy_all (tests.TestCase_AlincoDR235T) Testing Alinco DR235T copy all ... ok test_detect (tests.TestCase_AlincoDR235T) Testing Alinco DR235T detect ... ok test_edges (tests.TestCase_AlincoDR235T) Testing Alinco DR235T edges ... ok test_settings (tests.TestCase_AlincoDR235T) Testing Alinco DR235T settings ... skipped 'Settings not supported' test_banks (tests.TestCase_YaesuFT450D) Testing Yaesu FT-450D banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT450D) Testing Yaesu FT-450D brute force ... ok test_clone (tests.TestCase_YaesuFT450D) Testing Yaesu FT-450D clone ... ok test_copy_all (tests.TestCase_YaesuFT450D) Testing Yaesu FT-450D copy all ... ok test_detect (tests.TestCase_YaesuFT450D) Testing Yaesu FT-450D detect ... ok test_edges (tests.TestCase_YaesuFT450D) Testing Yaesu FT-450D edges ... ok test_settings (tests.TestCase_YaesuFT450D) Testing Yaesu FT-450D settings ... ok test_banks (tests.TestCase_YaesuVX5) Testing Yaesu VX-5 banks ... ok test_brute_force (tests.TestCase_YaesuVX5) Testing Yaesu VX-5 brute force ... ok test_clone (tests.TestCase_YaesuVX5) Testing Yaesu VX-5 clone ... ok test_copy_all (tests.TestCase_YaesuVX5) Testing Yaesu VX-5 copy all ... ok test_detect (tests.TestCase_YaesuVX5) Testing Yaesu VX-5 detect ... ok test_edges (tests.TestCase_YaesuVX5) Testing Yaesu VX-5 edges ... ok test_settings (tests.TestCase_YaesuVX5) Testing Yaesu VX-5 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_WouxunKGUV9DPlus) Testing Wouxun KG-UV9D Plus banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_WouxunKGUV9DPlus) Testing Wouxun KG-UV9D Plus brute force ... ok test_clone (tests.TestCase_WouxunKGUV9DPlus) Testing Wouxun KG-UV9D Plus clone ... ok test_copy_all (tests.TestCase_WouxunKGUV9DPlus) Testing Wouxun KG-UV9D Plus copy all ... ok test_detect (tests.TestCase_WouxunKGUV9DPlus) Testing Wouxun KG-UV9D Plus detect ... ok test_edges (tests.TestCase_WouxunKGUV9DPlus) Testing Wouxun KG-UV9D Plus edges ... ok test_settings (tests.TestCase_WouxunKGUV9DPlus) Testing Wouxun KG-UV9D Plus settings ... ok test_banks (tests.TestCase_FeidaxinFD288B) Testing Feidaxin FD-288B banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_FeidaxinFD288B) Testing Feidaxin FD-288B brute force ... ok test_clone (tests.TestCase_FeidaxinFD288B) Testing Feidaxin FD-288B clone ... ok test_copy_all (tests.TestCase_FeidaxinFD288B) Testing Feidaxin FD-288B copy all ... ok test_detect (tests.TestCase_FeidaxinFD288B) Testing Feidaxin FD-288B detect ... ok test_edges (tests.TestCase_FeidaxinFD288B) Testing Feidaxin FD-288B edges ... ok test_settings (tests.TestCase_FeidaxinFD288B) Testing Feidaxin FD-288B settings ... ok test_banks (tests.TestCase_YaesuFT2900R1900R) Testing Yaesu FT-2900R/1900R banks ... ok test_brute_force (tests.TestCase_YaesuFT2900R1900R) Testing Yaesu FT-2900R/1900R brute force ... ok test_clone (tests.TestCase_YaesuFT2900R1900R) Testing Yaesu FT-2900R/1900R clone ... ok test_copy_all (tests.TestCase_YaesuFT2900R1900R) Testing Yaesu FT-2900R/1900R copy all ... ok test_detect (tests.TestCase_YaesuFT2900R1900R) Testing Yaesu FT-2900R/1900R detect ... ok test_edges (tests.TestCase_YaesuFT2900R1900R) Testing Yaesu FT-2900R/1900R edges ... ok test_settings (tests.TestCase_YaesuFT2900R1900R) Testing Yaesu FT-2900R/1900R settings ... ok test_banks (tests.TestCase_RetevisRT21) Testing Retevis RT21 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RetevisRT21) Testing Retevis RT21 brute force ... ok test_clone (tests.TestCase_RetevisRT21) Testing Retevis RT21 clone ... ok test_copy_all (tests.TestCase_RetevisRT21) Testing Retevis RT21 copy all ... ok test_detect (tests.TestCase_RetevisRT21) Testing Retevis RT21 detect ... ok test_edges (tests.TestCase_RetevisRT21) Testing Retevis RT21 edges ... ok test_settings (tests.TestCase_RetevisRT21) Testing Retevis RT21 settings ... ok test_banks (tests.TestCase_YaesuFT817NDUS) Testing Yaesu FT-817ND (US) banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT817NDUS) Testing Yaesu FT-817ND (US) brute force ... ok test_clone (tests.TestCase_YaesuFT817NDUS) Testing Yaesu FT-817ND (US) clone ... ok test_copy_all (tests.TestCase_YaesuFT817NDUS) Testing Yaesu FT-817ND (US) copy all ... ok test_detect (tests.TestCase_YaesuFT817NDUS) Testing Yaesu FT-817ND (US) detect ... ok test_edges (tests.TestCase_YaesuFT817NDUS) Testing Yaesu FT-817ND (US) edges ... ok test_settings (tests.TestCase_YaesuFT817NDUS) Testing Yaesu FT-817ND (US) settings ... ok ====================================================================== ERROR: test_banks (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 banks ---------------------------------------------------------------------- Traceback (most recent call last): File "tests/__init__.py", line 59, in test_banks self._runtest(run_tests.TestCaseBanks) File "tests/__init__.py", line 40, in _runtest testcase.run() File "tests/run_tests.py", line 790, in run self.do_bank_names(rf) File "tests/run_tests.py", line 659, in do_bank_names banks, newbanks = self._do_bank_names(rf, "T") File "tests/run_tests.py", line 641, in _do_bank_names bm = self._wrapper.do("get_bank_model") File "tests/run_tests.py", line 138, in do fn = getattr(self._dst, function) AttributeError: 'FT8800RadioRight' object has no attribute 'get_bank_model' ---------------------------------------------------------------------- Ran 805 tests in 211.961s FAILED (errors=1, skipped=114) ERROR: InvocationError: '/chirp.hg/.tox/driver/bin/python -munittest -vb tests' style create: /chirp.hg/.tox/style style installdeps: pep8==1.6.2 style inst: /chirp.hg/.tox/dist/chirp-0.3.0dev.zip style installed: chirp==0.3.0.dev0,mercurial==3.7.3,pep8==1.6.2,pluggy==0.6.0,py==1.5.3,pyserial==3.0.1,six==1.11.0,tox==2.9.1,virtualenv==15.2.0 style runtests: PYTHONHASHSEED='3199637196' style runtests: commands[0] | python ./tools/cpep8.py ___________________________________ summary ____________________________________ unit: commands succeeded ERROR: driver: commands failed style: commands succeeded Build step 'Execute shell' marked build as failure Email was triggered for: Failure Sending email for trigger: Failure

1 1

[chirp_devel] [kguv9dplus] Add support for Wouxon KG-UV9D Plus #3509
by Jim Lieb 14 Dec '18

14 Dec '18

Updated to fix issues. This should pass the wordwrap. If it busts, I can resend via another MUA. I have run run_tests and pycodestyle-2.7 and they are clean. # HG changeset patch # User Jim Lieb <lieb(a)sea-troll.net> # Date 1543888193 28800 # Mon Dec 03 17:49:53 2018 -0800 # Node ID 33675c22dcad470b414f2487224f066c5ba04439 # Parent c6cab71d7d7d76b63367f5529a1b2ea075a8db1b [kguv9dplus] Add support for Wouxon KG-UV9D Plus Issue: #3509 Adds support for Wouxon KG-UV9d Plus model available from Powerwerx Passes run_tests and pycodestyle-2.7 This supports all functions relative to the Wouxon/Powerwerx configuration app with the following exceptions: 1. Scanning CTCSS/DCS (menu 51) is only available on the radio. It appears to be in volatile memory and gets reset to default (CTCSS) on power cycle. The supplied app doesn't support it either. 2. DTMF Transmit Interval is on the configuration tab and seems to operate on the supplied app but it does not appear to be written to the radio. As a result, it is not in the memory map and doesn't appear at all in this driver. 3. The supplied app fills in '0's to the right of either the menu or reset password UI fields. The Chirp UI doesn't seem to support field writeback so a less than 6 digit password has trailing blanks. However, the full '0' padded password is correctly uploaded to radio. Re-downloading the radio will show the filled out field correctly. For example, a password of '1234' is actually sent to the radio as '123400'. 4. Some tabs (Call ids in partiicular) would be better presented as a three column table. Signed-off-by: Jim Lieb <lieb(a)sea-troll.net> diff -r c6cab71d7d7d -r 33675c22dcad chirp/drivers/kguv9dplus.py --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/chirp/drivers/kguv9dplus.py Mon Dec 03 17:49:53 2018 -0800 @@ -0,0 +1,1890 @@ +# Copyright 2018 Jim Lieb <lieb(a)sea-troll.net> +# +# Driver for Wouxon KG-UV9D Plus +# +# Borrowed from other chirp drivers, especially the KG-UV8D Plus +# by Krystian Struzik <toner_82(a)tlen.pl> +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +"""Wouxun KG-UV9D Plus radio management module""" + +import time +import os +import logging +import struct +import string +from chirp import util, chirp_common, bitwise, memmap, errors, directory +from chirp.settings import RadioSetting, RadioSettingValue, \ + RadioSettingGroup, \ + RadioSettingValueBoolean, RadioSettingValueList, \ + RadioSettingValueInteger, RadioSettingValueString, \ + RadioSettings, InvalidValueError + +LOG = logging.getLogger(__name__) + +CMD_IDENT = 0x80 +CMD_HANGUP = 0x81 +CMD_RCONF = 0x82 +CMD_WCONF = 0x83 +CMD_RCHAN = 0x84 +CMD_WCHAN = 0x85 + +cmd_name = { + CMD_IDENT: "ident", + CMD_HANGUP: "hangup", + CMD_RCONF: "read config", + CMD_WCONF: "write config", + CMD_RCHAN: "read channel memory", # Unused + CMD_WCHAN: "write channel memory" # Unused because it is a hack. + } + +# This is used to write the configuration of the radio base on info +# gleaned from the downloaded app. There are empty spaces and we honor +# them because we don't know what they are (yet) although we read the +# whole of memory. +# +# Channel memory is separate. There are 1000 (1-999) channels. +# These are read/written to the radio in 4 channel (96 byte) +# records starting at address 0xa00 and ending at +# 0x4800 (presuming the end of channel 1000 is 0x4860-1 + +config_map = ( # map address, write size, write count + (0x40, 16, 1), # Passwords + (0x740, 40, 1), # FM chan 1-20 + (0x780, 16, 1), # vfo-b-150 + (0x790, 16, 1), # vfo-b-450 + (0x800, 16, 1), # vfo-a-150 + (0x810, 16, 1), # vfo-a-450 + (0x820, 16, 1), # vfo-a-300 + (0x830, 16, 1), # vfo-a-700 + (0x840, 16, 1), # vfo-a-200 + (0x860, 16, 1), # area-a-conf + (0x870, 16, 1), # area-b-conf + (0x880, 16, 1), # radio conf 0 + (0x890, 16, 1), # radio conf 1 + (0x8a0, 16, 1), # radio conf 2 + (0x8b0, 16, 1), # radio conf 3 + (0x8c0, 16, 1), # PTT-ANI + (0x8d0, 16, 1), # SCC + (0x8e0, 16, 1), # power save + (0x8f0, 16, 1), # Display banner + (0x940, 64, 2), # Scan groups and names + (0xa00, 64, 249), # Memory Channels 1-996 + (0x4840, 48, 1), # Memory Channels 997-999 + (0x4900, 32, 249), # Memory Names 1-996 + (0x6820, 24, 1), # Memory Names 997-999 + (0x7400, 64, 5), # CALL-ID 1-20, names 1-20 + ) + + +MEM_VALID = 0xfc +MEM_INVALID = 0xff + +# Radio memory map. This matches the reads/writes above. +# structure elements whose name starts with x are currently unidentified + +_MEM_FORMAT02 = """ +#seekto 0x40; + +struct { + char reset[6]; + char x46[2]; + char mode_sw[6]; + char x4e; +} passwords; + +#seekto 0x740; + +struct { + u16 fm_freq; +} fm_chans[20]; + +// each band has its own configuration, essentially its default params + +struct vfo { + u32 freq; + u32 offset; + u16 encqt; + u16 decqt; + u8 bit7_4:3, + qt:3, + bit1_0:2; + u8 bit7:1, + scan:1, + bit5:1, + pwr:2, + mod:1, + fm_dev:2; + u8 pad2:6, + shift:2; + u8 zeros; +}; + +#seekto 0x780; + +struct { + struct vfo band_150; + struct vfo band_450; +} vfo_b; + +#seekto 0x800; + +struct { + struct vfo band_150; + struct vfo band_450; + struct vfo band_300; + struct vfo band_700; + struct vfo band_200; +} vfo_a; + +// There are two independent radios, aka areas (as described +// in the manual as the upper and lower portions of the display... + +struct area_conf { + u8 w_mode; + u8 x861; + u8 w_chan; + u8 scan_grp; + u8 bcl; + u8 sql; + u8 cset; + u8 step; + u8 scan_mode; + u8 x869; + u8 scan_range; + u8 x86b; + u8 x86c; + u8 x86d; + u8 x86e; + u8 x86f; +}; + +#seekto 0x860; + +struct area_conf a_conf; + +#seekto 0x870; + +struct area_conf b_conf; + +#seekto 0x880; + +struct { + u8 menu_avail; + u8 reset_avail; + u8 x882; + u8 x883; + u8 lang; + u8 x885; + u8 beep; + u8 auto_am; + u8 qt_sw; + u8 lock; + u8 x88a; + u8 pf1; + u8 pf2; + u8 pf3; + u8 s_mute; + u8 type_set; + u8 tot; + u8 toa; + u8 ptt_id; + u8 x893; + u8 id_dly; + u8 x895; + u8 voice_sw; + u8 s_tone; + u8 abr_lvl; + u8 ring_time; + u8 roger; + u8 x89b; + u8 abr; + u8 save_m; + u8 lock_m; + u8 auto_lk; + u8 rpt_ptt; + u8 rpt_spk; + u8 rpt_rct; + u8 prich_sw; + u16 pri_ch; + u8 x8a6; + u8 x8a7; + u8 dtmf_st; + u8 dtmf_tx; + u8 x8aa; + u8 sc_qt; + u8 apo_tmr; + u8 vox_grd; + u8 vox_dly; + u8 rpt_kpt; + struct { + u16 scan_st; + u16 scan_end; + } a; + struct { + u16 scan_st; + u16 scan_end; + } b; + u8 x8b8; + u8 x8b9; + u8 x8ba; + u8 ponmsg; + u8 blcdsw; + u8 bledsw; + u8 x8be; + u8 x8bf; +} settings; + + +#seekto 0x8c0; +struct { + u8 code[6]; + char x8c6[10]; +} my_callid; + +#seekto 0x8d0; +struct { + u8 scc[6]; + char x8d6[10]; +} stun; + +#seekto 0x8e0; +struct { + u16 wake; + u16 sleep; +} save[4]; + +#seekto 0x8f0; +struct { + char banner[16]; +} display; + +#seekto 0x940; +struct { + struct { + i16 scan_st; + i16 scan_end; + } addrs[10]; + u8 x0968[8]; + struct { + char name[8]; + } names[10]; +} scn_grps; + +// this array of structs is marshalled via the R/WCHAN commands +#seekto 0xa00; +struct { + u32 rxfreq; + u32 txfreq; + u16 encQT; + u16 decQT; + u8 bit7_5:3, // all ones + qt:3, + bit1_0:2; + u8 bit7:1, + scan:1, + bit5:1, + pwr:2, + mod:1, + fm_dev:2; + u8 state; + u8 c3; +} chan_blk[999]; + +// nobody really sees this. It is marshalled with chan_blk +// in 4 entry chunks +#seekto 0x4900; + +// Tracks with the index of chan_blk[] +struct { + char name[8]; +} chan_name[999]; + +#seekto 0x7400; +struct { + u8 cid[6]; + u8 pad[2]; +}call_ids[20]; + +// This array tracks with the index of call_ids[] +struct { + char name[6]; + char pad[2]; +} cid_names[20]; + """ + + +# Support for the Wouxun KG-UV9D Plus radio +# Serial coms are at 19200 baud +# The data is passed in variable length records +# Record structure: +# Offset Usage +# 0 start of record (\x7d) +# 1 Command (6 commands, see above) +# 2 direction (\xff PC-> Radio, \x00 Radio -> PC) +# 3 length of payload (excluding header/checksum) (n) +# 4 payload (n bytes) +# 4+n+1 checksum - byte sum (% 256) of bytes 1 -> 4+n +# +# Memory Read Records: +# the payload is 3 bytes, first 2 are offset (big endian), +# 3rd is number of bytes to read +# Memory Write Records: +# the maximum payload size (from the Wouxun software) +# seems to be 66 bytes (2 bytes location + 64 bytes data). + +def _pkt_encode(op, payload): + """Assemble a packet for the radio and encode it for transmission. + Yes indeed, the checksum we store is only 4 bits. Why? + I suspect it's a bug in the radio firmware guys didn't want to fix, + i.e. a typo 0xff -> 0xf...""" + + data = bytearray() + data.append(0x7d) # tag that marks the beginning of the packet + data.append(op) + data.append(0xff) # 0xff is from app to radio + # calc checksum from op to end + cksum = op + 0xff + if (payload): + data.append(len(payload)) + cksum += len(payload) + for byte in payload: + cksum += byte + data.append(byte) + else: + data.append(0x00) + # Yea, this is a 4 bit cksum (also known as a bug) + data.append(cksum & 0xf) + + # now obfuscate by an xor starting with first payload byte ^ 0x52 + # including the trailing cksum. + xorbits = 0x52 + for i, byte in enumerate(data[4:]): + xord = xorbits ^ byte + data[i + 4] = xord + xorbits = xord + return(data) + + +def _pkt_decode(data): + """Take a packet hot off the wire and decode it into clear text + and return the fields. We say <<cleartext>> here because all it + turns out to be is annoying obfuscation. + This is the inverse of pkt_decode""" + + # we don't care about data[0]. + # It is always 0x7d and not included in checksum + op = data[1] + direction = data[2] + bytecount = data[3] + + # First un-obfuscate the payload and cksum + payload = bytearray() + xorbits = 0x52 + for i, byte in enumerate(data[4:]): + payload.append(xorbits ^ byte) + xorbits = byte + + # Calculate the checksum starting with the 3 bytes of the header + cksum = op + direction + bytecount + for byte in payload[:-1]: + cksum += byte + # yes, a 4 bit cksum to match the encode + cksum_match = (cksum & 0xf) == payload[-1] + if (not cksum_match): + LOG.debug( + "Checksum missmatch: %x != %x; " % (cksum, payload[-1])) + return (cksum_match, op, payload[:-1]) + +# UI callbacks to process input for mapping UI fields to memory cells + + +def freq2int(val, min, max): + """Convert a frequency as a string to a u32. Units is Hz + """ + _freq = chirp_common.parse_freq(str(val)) + if _freq > max or _freq < min: + raise InvalidValueError("Frequency %s is not with in %s-%s" % + (chirp_common.format_freq(_freq), + chirp_common.format_freq(min), + chirp_common.format_freq(max))) + return _freq + + +def int2freq(freq): + """ + Convert a u32 frequency to a string for UI data entry/display + This is stored in the radio as units of 10Hz which we compensate to Hz. + A value of -1 indicates <no freqency>, i.e. unused channel. + """ + if (int(freq) > 0): + f = chirp_common.format_freq(freq) + return f + else: + return "" + + +def freq2short(val, min, max): + """Convert a frequency as a string to a u16 which is units of 10KHz + """ + _freq = chirp_common.parse_freq(str(val)) + if _freq > max or _freq < min: + raise InvalidValueError("Frequency %s is not with in %s-%s" % + (chirp_common.format_freq(_freq), + chirp_common.format_freq(min), + chirp_common.format_freq(max))) + return _freq/100000 & 0xFFFF + + +def short2freq(freq): + """ + Convert a short frequency to a string for UI data entry/display + This is stored in the radio as units of 10KHz which we + compensate to Hz. + A value of -1 indicates <no frequency>, i.e. unused channel. + """ + if (int(freq) > 0): + f = chirp_common.format_freq(freq * 100000) + return f + else: + return "" + + +def tone2short(t): + """Convert a string tone or DCS to an encoded u16 + """ + tone = str(t) + if tone == "----": + u16tone = 0x0000 + elif tone[0] == 'D': # This is a DCS code + c = tone[1: -1] + code = int(c, 8) + if tone[-1] == 'I': + code |= 0x4000 + u16tone = code | 0x8000 + else: # This is an analog CTCSS + u16tone = int(tone[0:-2]+tone[-1]) & 0xffff # strip the '.' + return u16tone + + +def short2tone(tone): + """ Map a binary CTCSS/DCS to a string name for the tone + """ + if tone == 0 or tone == 0xffff: + ret = "----" + else: + code = tone & 0x3fff + if tone & 0x8000: # This is a DCS + if tone & 0x4000: # This is an inverse code + ret = "D%0.3oI" % code + else: + ret = "D%0.3oN" % code + else: # Just plain old analog CTCSS + ret = "%4.1f" % (code / 10.0) + return ret + + +def callid2str(cid): + """Caller ID per MDC-1200 spec? Must be 3-6 digits (100 - 999999). + One digit (binary) per byte, terminated with '0xc' + """ + + bin2ascii = " 1234567890" + cidstr = "" + for i in range(0, 6): + b = cid[i].get_value() + if b == 0xc: # the cid EOL + break + if b == 0 or b > 0xa: + raise InvalidValueError( + "Caller ID code has illegal byte 0x%x" % b) + cidstr += bin2ascii[b] + return cidstr + + +def str2callid(val): + """ Convert caller id strings from callid2str. + """ + ascii2bin = "0123456789" + s = str(val).strip() + if len(s) < 3 or len(s) > 6: + raise InvalidValueError( + "Caller ID must be at least 3 and no more than 6 digits") + if s[0] == '0': + raise InvalidValueError( + "First digit of a Caller ID cannot be a zero '0'") + blk = bytearray() + for c in s: + if c not in ascii2bin: + raise InvalidValueError( + "Caller ID must be all digits 0x%x" % c) + b = (0xa, 0x1, 0x2, 0x3, 0x4, 0x5, 0x6, 0x7, 0x8, 0x9)[int(c)] + blk.append(b) + if len(blk) < 6: + blk.append(0xc) # EOL a short ID + if len(blk) < 6: + for i in range(0, (6 - len(blk))): + blk.append(0xf0) + return blk + + +def digits2str(digits, padding=' ', width=6): + """Convert a password or SCC digit string to a string + Passwords are expanded to and must be 6 chars. Fill them with '0' + """ + + bin2ascii = "0123456789" + digitsstr = "" + for i in range(0, 6): + b = digits[i].get_value() + if b == 0xc: # the digits EOL + break + if b >= 0xa: + raise InvalidValueError( + "Value has illegal byte 0x%x" % ord(b)) + digitsstr += bin2ascii[b] + digitsstr = digitsstr.ljust(width, padding) + return digitsstr + + +def str2digits(val): + """ Callback for edited strings from digits2str. + """ + ascii2bin = " 0123456789" + s = str(val).strip() + if len(s) < 3 or len(s) > 6: + raise InvalidValueError( + "Value must be at least 3 and no more than 6 digits") + blk = bytearray() + for c in s: + if c not in ascii2bin: + raise InvalidValueError("Value must be all digits 0x%x" % c) + blk.append(int(c)) + for i in range(len(blk), 6): + blk.append(0xc) # EOL a short ID + return blk + + +def name2str(name): + """ Convert a callid or scan group name to a string + Deal with fixed field padding (\0 or \0xff) + """ + + namestr = "" + for i in range(0, len(name)): + b = ord(name[i].get_value()) + if b != 0 and b != 0xff: + namestr += chr(b) + return namestr + + +def str2name(val, size=6, fillchar='\0', emptyfill='\0'): + """ Convert a string to a name. A name is a 6 element bytearray + with ascii chars. + """ + val = str(val).rstrip(' \t\r\n\0\0xff') + if len(val) == 0: + name = "".ljust(size, emptyfill) + else: + name = val.ljust(size, fillchar) + return name + + +def pw2str(pw): + """Convert a password string (6 digits) to a string + Passwords must be 6 digits. If it is shorter, pad right with '0' + """ + pwstr = "" + ascii2bin = "0123456789" + for i in range(0, len(pw)): + b = pw[i].get_value() + if b not in ascii2bin: + raise InvalidValueError("Value must be digits 0-9") + pwstr += b + pwstr = pwstr.ljust(6, '0') + return pwstr + + +def str2pw(val): + """Store a password from UI to memory obj + If we clear the password (make it go away), change the + empty string to '000000' since the radio must have *something* + Also, fill a < 6 digit pw with 0's + """ + ascii2bin = "0123456789" + val = str(val).rstrip(' \t\r\n\0\0xff') + if len(val) == 0: # a null password + val = "000000" + for i in range(0, len(val)): + b = val[i] + if b not in ascii2bin: + raise InvalidValueError("Value must be digits 0-9") + if len(val) == 0: + pw = "".ljust(6, '\0') + else: + pw = val.ljust(6, '0') + return pw + + +# Helpers to replace python2 things like confused str/byte + +def _hex_print(data, addrfmt=None): + """Return a hexdump-like encoding of @data + We expect data to be a bytearray, not a string. + Expanded from borrowed code to use the first 2 bytes as the address + per comm packet format. + """ + if addrfmt is None: + addrfmt = '%(addr)03i' + addr = 0 + else: # assume first 2 bytes are address + a = struct.unpack(">H", data[0:2]) + addr = a[0] + data = data[2:] + + block_size = 16 + + lines = (len(data) / block_size) + if (len(data) % block_size > 0): + lines += 1 + + out = "" + left = len(data) + for block in range(0, lines): + addr += block * block_size + try: + out += addrfmt % locals() + except (OverflowError, ValueError, TypeError, KeyError): + out += "%03i" % addr + out += ': ' + + if left < block_size: + limit = left + else: + limit = block_size + + for j in range(0, block_size): + if (j < limit): + out += "%02x " % data[(block * block_size) + j] + else: + out += " " + + out += " " + + for j in range(0, block_size): + + if (j < limit): + _byte = data[(block * block_size) + j] + if _byte >= 0x20 and _byte < 0x7F: + out += "%s" % chr(_byte) + else: + out += "." + else: + out += " " + out += "\n" + if (left > block_size): + left -= block_size + + return out + + +# Useful UI lists +STEPS = [2.5, 5.0, 6.25, 10.0, 12.5, 25.0, 50.0, 100.0] +S_TONES = [str(x) for x in [1000, 1450, 1750, 2100]] +STEP_LIST = [str(x)+"kHz" for x in STEPS] +ROGER_LIST = ["Off", "Begin", "End", "Both"] +TIMEOUT_LIST = [str(x) + "s" for x in range(15, 601, 15)] +TOA_LIST = ["Off"] + ["%ds" % t for t in range(1, 10)] +BANDWIDTH_LIST = ["Wide", "Narrow"] +LANGUAGE_LIST = ["English", "Chinese"] +PF1KEY_LIST = ["OFF", "call id", "r-alarm", "SOS", "SF-TX"] +PF2KEY_LIST = ["OFF", "Scan", "Second", "lamp", "SDF-DIR", "K-lamp"] +PF3KEY_LIST = ["OFF", "Call ID", "R-ALARM", "SOS", "SF-TX"] +WORKMODE_LIST = ["VFO freq", "Channel No.", "Ch. No.+Freq.", + "Ch. No.+Name"] +BACKLIGHT_LIST = ["Off"] + ["%sS" % t for t in range(1, 31)] + \ + ["Always On"] +SAVE_MODES = ["Off", "1", "2", "3", "4"] +LOCK_MODES = ["key-lk", "key+pg", "key+ptt", "all"] +APO_TIMES = ["Off"] + ["%dm" % t for t in range(15, 151, 15)] +OFFSET_LIST = ["none", "+", "-"] +PONMSG_LIST = ["Battery Volts", "Bitmap"] +SPMUTE_LIST = ["QT", "QT*T", "QT&T"] +DTMFST_LIST = ["Off", "DT-ST", "ANI-ST", "DT-ANI"] +DTMF_TIMES = ["%d" % x for x in range(80, 501, 20)] +PTTID_LIST = ["Off", "Begin", "End", "Both"] +ID_DLY_LIST = ["%dms" % t for t in range(100, 3001, 100)] +VOX_GRDS = ["Off"] + ["%dlevel" % l for l in range(1, 11)] +VOX_DLYS = ["Off"] + ["%ds" % t for t in range(1, 5)] +RPT_KPTS = ["Off"] + ["%dms" % t for t in range(100, 5001, 100)] +LIST_1_5 = ["%s" % x for x in range(1, 6)] +LIST_0_9 = ["%s" % x for x in range(0, 10)] +LIST_1_20 = ["%s" % x for x in range(1, 21)] +LIST_OFF_10 = ["Off"] + ["%s" % x for x in range(1, 11)] +SCANGRP_LIST = ["All"] + ["%s" % x for x in range(1, 11)] +SCANMODE_LIST = ["TO", "CO", "SE"] +SCANRANGE_LIST = ["Current band", "freq range", "ALL"] +SCQT_LIST = ["Decoder", "Encoder", "Both"] +S_MUTE_LIST = ["off", "rx mute", "tx mute", "r/t mute"] +POWER_LIST = ["Low", "Med", "High"] +RPTMODE_LIST = ["Radio", "One direction Repeater", + "Two direction repeater"] +TONE_LIST = ["----"] + ["%s" % str(t) for t in chirp_common.TONES] + \ + ["D%0.3dN" % dts for dts in chirp_common.DTCS_CODES] + \ + ["D%0.3dI" % dts for dts in chirp_common.DTCS_CODES] + + +(a)directory.register +class KGUV9DPlusRadio(chirp_common.CloneModeRadio, + chirp_common.ExperimentalRadio): + + """Wouxun KG-UV9D Plus""" + VENDOR = "Wouxun" + MODEL = "KG-UV9D Plus" + _model = "KG-UV9D" + _rev = "00" # default rev for the radio I know about... + _file_ident = "kg-uv9d" + BAUD_RATE = 19200 + POWER_LEVELS = [chirp_common.PowerLevel("L", watts=1), + chirp_common.PowerLevel("M", watts=2), + chirp_common.PowerLevel("H", watts=5)] + _mmap = "" + + def _read_record(self): + """ Read and validate the header of a radio reply. + A record is a formatted byte stream as follows: + 0x7D All records start with this + opcode This is in the set of legal commands. + The radio reply matches the request + dir This is the direction, 0xFF to the radio, + 0x00 from the radio. + cnt Count of bytes in payload + (not including the trailing checksum byte) + <cnt bytes> + <checksum byte> + """ + + # first get the header and validate it + data = bytearray(self.pipe.read(4)) + if (len(data) < 4): + raise errors.RadioError('Radio did not respond') + if (data[0] != 0x7D): + raise errors.RadioError( + 'Radio reply garbled (%02x)' % data[0]) + if (data[1] not in cmd_name): + raise errors.RadioError( + "Unrecognized opcode (%02x)" % data[1]) + if (data[2] != 0x00): + raise errors.RadioError( + "Direction incorrect. Got (%02x)" % data[2]) + payload_len = data[3] + # don't forget to read the checksum byte + data.extend(self.pipe.read(payload_len + 1)) + if (len(data) != (payload_len + 5)): # we got a short read + raise errors.RadioError( + "Radio reply wrong size. Wanted %d, got %d" % + ((payload_len + 1), (len(data) - 4))) + return _pkt_decode(data) + + def _write_record(self, cmd, payload=None): + """ Write a request packet to the radio. + """ + + packet = _pkt_encode(cmd, payload) + self.pipe.write(packet) + + @classmethod + def match_model(cls, filedata, filename): + """Look for bits in the file image and see if it looks + like ours... + TODO: there is a bunch of rubbish between 0x50 and 0x160 + that is still a known unknown + """ + return cls._file_ident in filedata[0x51:0x59].lower() + + def _identify(self): + """ Identify the radio + The ident block identifies the radio and its capabilities. + This block is always 78 bytes. The rev == '01' is the base + radio and '02' seems to be the '-Plus' version. + I don't really trust the content after the model and revision. + One would assume this is pretty much constant data but I have + seen differences between my radio and the dump named + KG-UV9D-Plus-OutOfBox-Read.txt from bug #3509. The first + five bands match the OEM windows + app except the 350-400 band. The OOB trace has the 700MHz + band different. This is speculation at this point. + + TODO: This could be smarter and reject a radio not actually + a UV9D... + """ + + for _i in range(0, 10): # retry 10 times if we get junk + self._write_record(CMD_IDENT) + chksum_match, op, _resp = self._read_record() + if len(_resp) == 0: + raise Exception("Radio not responding") + if len(_resp) != 74: + LOG.error( + "Expected and IDENT reply of 78 bytes. Got (%d)" % + len(_resp)) + continue + if not chksum_match: + LOG.error("Checksum error: retrying ident...") + time.sleep(0.100) + continue + if op != CMD_IDENT: + LOG.error("Expected IDENT reply. Got (%02x)" % op) + continue + LOG.debug("Got:\n%s" % _hex_print(_resp)) + (mod, rev) = struct.unpack(">7s2s", _resp[0:9]) + LOG.debug("Model %s, rev %s" % (mod, rev)) + if mod == self._model: + self._rev = rev + return + else: + raise Exception("Unable to identify radio") + raise Exception("All retries to identify failed") + + def process_mmap(self): + if self._rev == "02" or self._rev == "00": + self._memobj = bitwise.parse(_MEM_FORMAT02, self._mmap) + else: # this is where you elif the other variants and non-Plus radios + raise errors.RadioError( + "Unrecognized model variation (%s). No memory map for it" % + self._rev) + + def sync_in(self): + """ Public sync_in + Download contents of the radio. Throw errors back + to the core if the radio does not respond. + """ + try: + self._identify() + self._mmap = self._do_download() + self._write_record(CMD_HANGUP) + except errors.RadioError: + raise + except Exception, e: + LOG.exception('Unknown error during download process') + raise errors.RadioError( + "Failed to communicate with radio: %s" % e) + self.process_mmap() + + def sync_out(self): + """ Public sync_out + Upload the modified memory image into the radio. + """ + + try: + self._identify() + self._do_upload() + self._write_record(CMD_HANGUP) + except errors.RadioError: + raise + except Exception, e: + raise errors.RadioError( + "Failed to communicate with radio: %s" % e) + return + + def _do_download(self): + """ Read the whole of radio memory in 64 byte chunks. + We load the config space followed by loading memory channels. + The radio seems to be a "clone" type and the memory channels + are actually within the config space. There are separate + commands (CMD_RCHAN, CMD_WCHAN) for reading channel memory but + these seem to be a hack that can only do 4 channels at a time. + Since the radio only supports 999, (can only support 3 chars + in the display UI?) although the vendors app reads 1000 + channels, it hacks back to config writes (CMD_WCONF) for the + last 3 channels and names. We keep it simple and just read + the whole thing even though the vendor app doesn't. Channels + are separate in their app simply because the radio protocol + has read/write commands to access it. What they do is simply + marshal the frequency+mode bits in 4 channel chunks followed + by a separate chunk of for names. In config space, they are two + separate arrays 1..999. Given that this space is not a + multiple of 4, there is hackery on upload to do the writes to + config space. See upload for this. + """ + + mem = bytearray(0x8000) # The radio's memory map is 32k + for addr in range(0, 0x8000, 64): + req = bytearray(struct.pack(">HB", addr, 64)) + self._write_record(CMD_RCONF, req) + chksum_match, op, resp = self._read_record() + if not chksum_match: + LOG.debug(_hex_print(resp)) + raise Exception( + "Checksum error while reading configuration (0x%x)" % + addr) + pa = struct.unpack(">H", resp[0:2]) + pkt_addr = pa[0] + payload = resp[2:] + if op != CMD_RCONF or addr != pkt_addr: + raise Exception( + "Expected CMD_RCONF (%x) reply. Got (%02x: %x)" % + (addr, op, pkt_addr)) + LOG.debug("Config read (0x%x):\n%s" % + (addr, _hex_print(resp, '0x%(addr)04x'))) + for i in range(0, len(payload) - 1): + mem[addr + i] = payload[i] + if self.status_fn: + status = chirp_common.Status() + status.cur = addr + status.max = 0x8000 + status.msg = "Cloning from radio" + self.status_fn(status) + strmem = "".join([chr(x) for x in mem]) + return memmap.MemoryMap(strmem) + + def _do_upload(self): + """Walk through the config map and write updated records to + the radio. The config map contains only the regions we know + about. We don't use the channel memory commands to avoid the + hackery of using config write commands to fill in the last + 3 channel memory and names slots. As we discover other useful + goodies in the map, we can add more slots... + """ + for ar, size, count in config_map: + for addr in range(ar, ar + (size*count), size): + req = bytearray(struct.pack(">H", addr)) + req.extend(self.get_mmap()[addr:addr + size]) + self._write_record(CMD_WCONF, req) + LOG.debug("Config write (0x%x):\n%s" % + (addr, _hex_print(req))) + chksum_match, op, ack = self._read_record() + LOG.debug("Config write ack [%x]\n%s" % + (addr, _hex_print(ack))) + a = struct.unpack(">H", ack) # big endian short... + ack = a[0] + if not chksum_match or op != CMD_WCONF or addr != ack: + msg = "" + if not chksum_match: + msg += "Checksum err, " + if op != CMD_WCONF: + msg += "cmd mismatch %x != %x, " % \ + (op, CMD_WCONF) + if addr != ack: + msg += "ack error %x != %x, " % (addr, ack) + raise Exception("Radio did not ack block: %s error" % msg) + if self.status_fn: + status = chirp_common.Status() + status.cur = addr + status.max = 0x8000 + status.msg = "Update radio" + self.status_fn(status) + + def get_features(self): + """ Public get_features + Return the features of this radio once we have identified + it and gotten its bits + """ + rf = chirp_common.RadioFeatures() + rf.has_settings = True + rf.has_ctone = True + rf.has_rx_dtcs = True + rf.has_cross = True + rf.has_tuning_step = False + rf.has_bank = False + rf.can_odd_split = True + rf.valid_skips = ["", "S"] + rf.valid_tmodes = ["", "Tone", "TSQL", "DTCS", "Cross"] + rf.valid_cross_modes = [ + "Tone->Tone", + "Tone->DTCS", + "DTCS->Tone", + "DTCS->", + "->Tone", + "->DTCS", + "DTCS->DTCS", + ] + rf.valid_modes = ["FM", "NFM", "AM"] + rf.valid_power_levels = self.POWER_LEVELS + rf.valid_name_length = 8 + rf.valid_duplexes = ["", "-", "+", "split", "off"] + rf.valid_bands = [(108000000, 136000000), # Aircraft AM + (136000000, 180000000), # supports 2m + (230000000, 250000000), + (350000000, 400000000), + (400000000, 520000000), # supports 70cm + (700000000, 985000000)] + rf.valid_characters = chirp_common.CHARSET_ASCII + rf.memory_bounds = (1, 999) # 999 memories + return rf + + @classmethod + def get_prompts(cls): + rp = chirp_common.RadioPrompts() + rp.experimental = ("This radio driver is currently under development. " + "There are no known issues with it, but you should " + "proceed with caution.") + return rp + + def get_raw_memory(self, number): + return repr(self._memobj.chan_blk[number]) + + def _get_tone(self, _mem, mem): + """Decode both the encode and decode CTSS/DCS codes from + the memory channel and stuff them into the UI + memory channel row. + """ + txtone = short2tone(_mem.encQT) + rxtone = short2tone(_mem.decQT) + pt = "N" + pr = "N" + + if txtone == "----": + txmode = "" + elif txtone[0] == "D": + mem.dtcs = int(txtone[1:4]) + if txtone[4] == "I": + pt = "R" + txmode = "DTCS" + else: + mem.rtone = float(txtone) + txmode = "Tone" + + if rxtone == "----": + rxmode = "" + elif rxtone[0] == "D": + mem.rx_dtcs = int(rxtone[1:4]) + if rxtone[4] == "I": + pr = "R" + rxmode = "DTCS" + else: + mem.ctone = float(rxtone) + rxmode = "Tone" + + if txmode == "Tone" and len(rxmode) == 0: + mem.tmode = "Tone" + elif (txmode == rxmode and txmode == "Tone" and + mem.rtone == mem.ctone): + mem.tmode = "TSQL" + elif (txmode == rxmode and txmode == "DTCS" and + mem.dtcs == mem.rx_dtcs): + mem.tmode = "DTCS" + elif (len(rxmode) + len(txmode)) > 0: + mem.tmode = "Cross" + mem.cross_mode = "%s->%s" % (txmode, rxmode) + + mem.dtcs_polarity = pt + pr + + LOG.debug("_get_tone: Got TX %s (%i) RX %s (%i)" % + (txmode, _mem.encQT, rxmode, _mem.decQT)) + + def get_memory(self, number): + """ Public get_memory + Return the channel memory referenced by number to the UI. + """ + _mem = self._memobj.chan_blk[number - 1] + _nam = self._memobj.chan_name[number - 1] + + mem = chirp_common.Memory() + mem.number = number + _valid = _mem.state + if _valid != MEM_VALID: + mem.empty = True + return mem + else: + mem.empty = False + + mem.freq = int(_mem.rxfreq) * 10 + + if _mem.txfreq == 0xFFFFFFFF: + # TX freq not set + mem.duplex = "off" + mem.offset = 0 + elif int(_mem.rxfreq) == int(_mem.txfreq): + mem.duplex = "" + mem.offset = 0 + elif abs(int(_mem.rxfreq) * 10 - int(_mem.txfreq) * 10) > 70000000: + mem.duplex = "split" + mem.offset = int(_mem.txfreq) * 10 + else: + mem.duplex = int(_mem.rxfreq) > int(_mem.txfreq) and "-" or "+" + mem.offset = abs(int(_mem.rxfreq) - int(_mem.txfreq)) * 10 + + mem.name = name2str(_nam.name) + + self._get_tone(_mem, mem) + + mem.skip = "" if bool(_mem.scan) else "S" + + mem.power = self.POWER_LEVELS[_mem.pwr] + if _mem.mod == 1: + mem.mode = "AM" + elif _mem.fm_dev == 0: + mem.mode = "FM" + else: + mem.mode = "NFM" + # qt has no home in the UI + return mem + + def _set_tone(self, mem, _mem): + """Update the memory channel block CTCC/DCS tones + from the UI fields + """ + def _set_dcs(code, pol): + val = int("%i" % code, 8) | 0x8000 + if pol == "R": + val |= 0x4000 + return val + + rx_mode = tx_mode = None + rxtone = txtone = 0x0000 + + if mem.tmode == "Tone": + tx_mode = "Tone" + txtone = int(mem.rtone * 10) + elif mem.tmode == "TSQL": + rx_mode = tx_mode = "Tone" + rxtone = txtone = int(mem.ctone * 10) + elif mem.tmode == "DTCS": + tx_mode = rx_mode = "DTCS" + txtone = _set_dcs(mem.dtcs, mem.dtcs_polarity[0]) + rxtone = _set_dcs(mem.dtcs, mem.dtcs_polarity[1]) + elif mem.tmode == "Cross": + tx_mode, rx_mode = mem.cross_mode.split("->") + if tx_mode == "DTCS": + txtone = _set_dcs(mem.dtcs, mem.dtcs_polarity[0]) + elif tx_mode == "Tone": + txtone = int(mem.rtone * 10) + if rx_mode == "DTCS": + rxtone = _set_dcs(mem.rx_dtcs, mem.dtcs_polarity[1]) + elif rx_mode == "Tone": + rxtone = int(mem.ctone * 10) + + _mem.decQT = rxtone + _mem.encQT = txtone + + LOG.debug("Set TX %s (%i) RX %s (%i)" % + (tx_mode, _mem.encQT, rx_mode, _mem.decQT)) + + def set_memory(self, mem): + """ Public set_memory + Inverse of get_memory. Update the radio memory image + from the mem object + """ + number = mem.number + + _mem = self._memobj.chan_blk[number - 1] + _nam = self._memobj.chan_name[number - 1] + + if mem.empty: + _mem.set_raw("\xFF" * (_mem.size() / 8)) + _nam.name = str2name("", 8, '\0', '\0') + _mem.state = MEM_INVALID + return + + _mem.rxfreq = int(mem.freq / 10) + if mem.duplex == "off": + _mem.txfreq = 0xFFFFFFFF + elif mem.duplex == "split": + _mem.txfreq = int(mem.offset / 10) + elif mem.duplex == "+": + _mem.txfreq = int(mem.freq / 10) + int(mem.offset / 10) + elif mem.duplex == "-": + _mem.txfreq = int(mem.freq / 10) - int(mem.offset / 10) + else: + _mem.txfreq = int(mem.freq / 10) + _mem.scan = int(mem.skip != "S") + if mem.mode == "FM": + _mem.mod = 0 # make sure forced AM is off + _mem.fm_dev = 0 + elif mem.mode == "NFM": + _mem.mod = 0 + _mem.fm_dev = 1 + elif mem.mode == "AM": + _mem.mod = 1 # AM on + _mem.fm_dev = 1 # set NFM bandwidth + else: + _mem.mod = 0 + _mem.fm_dev = 0 # Catchall default is FM + # set the tone + self._set_tone(mem, _mem) + # set the power + if mem.power: + _mem.pwr = self.POWER_LEVELS.index(mem.power) + else: + _mem.pwr = True + + # Set fields we can't access via the UI table to safe defaults + _mem.qt = 0 # mute mode to QT + + _nam.name = str2name(mem.name, 8, '\0', '\0') + _mem.state = MEM_VALID + +# Build the UI configuration tabs +# the channel memory tab is built by the core. +# We have no control over it + + def _core_tab(self): + """ Build Core Configuration tab + Radio settings common to all modes and areas go here. + """ + s = self._memobj.settings + + cf = RadioSettingGroup("cfg_grp", "Configuration") + + cf.append(RadioSetting("auto_am", + "Auto detect AM(53)", + RadioSettingValueBoolean(s.auto_am))) + cf.append(RadioSetting("qt_sw", + "Scan tone detect(59)", + RadioSettingValueBoolean(s.qt_sw))) + cf.append( + RadioSetting("s_mute", + "SubFreq Mute(60)", + RadioSettingValueList(S_MUTE_LIST, + S_MUTE_LIST[s.s_mute]))) + cf.append( + RadioSetting("tot", + "Transmit timeout Timer(10)", + RadioSettingValueList(TIMEOUT_LIST, + TIMEOUT_LIST[s.tot]))) + cf.append( + RadioSetting("toa", + "Transmit Timeout Alarm(11)", + RadioSettingValueList(TOA_LIST, + TOA_LIST[s.toa]))) + cf.append( + RadioSetting("ptt_id", + "PTT Caller ID mode(23)", + RadioSettingValueList(PTTID_LIST, + PTTID_LIST[s.ptt_id]))) + cf.append( + RadioSetting("id_dly", + "Caller ID Delay time(25)", + RadioSettingValueList(ID_DLY_LIST, + ID_DLY_LIST[s.id_dly]))) + cf.append(RadioSetting("voice_sw", + "Voice Guide(12)", + RadioSettingValueBoolean(s.voice_sw))) + cf.append(RadioSetting("beep", + "Keypad Beep(13)", + RadioSettingValueBoolean(s.beep))) + cf.append( + RadioSetting("s_tone", + "Side Tone(36)", + RadioSettingValueList(S_TONES, + S_TONES[s.s_tone]))) + cf.append( + RadioSetting("ring_time", + "Ring Time(26)", + RadioSettingValueList( + LIST_OFF_10, + LIST_OFF_10[s.ring_time]))) + cf.append( + RadioSetting("roger", + "Roger Beep(9)", + RadioSettingValueList(ROGER_LIST, + ROGER_LIST[s.roger]))) + cf.append(RadioSetting("blcdsw", + "Backlight(41)", + RadioSettingValueBoolean(s.blcdsw))) + cf.append( + RadioSetting("abr", + "Auto Backlight Time(1)", + RadioSettingValueList(BACKLIGHT_LIST, + BACKLIGHT_LIST[s.abr]))) + cf.append( + RadioSetting("abr_lvl", + "Backlight Brightness(27)", + RadioSettingValueList(LIST_1_5, + LIST_1_5[s.abr_lvl]))) + cf.append(RadioSetting("lock", + "Keypad Lock", + RadioSettingValueBoolean(s.lock))) + cf.append( + RadioSetting("lock_m", + "Keypad Lock Mode(35)", + RadioSettingValueList(LOCK_MODES, + LOCK_MODES[s.lock_m]))) + cf.append(RadioSetting("auto_lk", + "Keypad Autolock(34)", + RadioSettingValueBoolean(s.auto_lk))) + cf.append(RadioSetting("prich_sw", + "Priority Channel Scan(33)", + RadioSettingValueBoolean(s.prich_sw))) + cf.append(RadioSetting("pri_ch", + "Priority Channel(32)", + RadioSettingValueInteger(1, 999, + s.pri_ch))) + cf.append( + RadioSetting("dtmf_st", + "DTMF Sidetone(22)", + RadioSettingValueList(DTMFST_LIST, + DTMFST_LIST[s.dtmf_st]))) + cf.append(RadioSetting("sc_qt", + "Scan QT Save Mode(38)", + RadioSettingValueList( + SCQT_LIST, + SCQT_LIST[s.sc_qt]))) + cf.append( + RadioSetting("apo_tmr", + "Automatic Power-off(39)", + RadioSettingValueList(APO_TIMES, + APO_TIMES[s.apo_tmr]))) + cf.append( # VOX "guard" is really VOX trigger audio level + RadioSetting("vox_grd", + "VOX level(7)", + RadioSettingValueList(VOX_GRDS, + VOX_GRDS[s.vox_grd]))) + cf.append( + RadioSetting("vox_dly", + "VOX Delay(37)", + RadioSettingValueList(VOX_DLYS, + VOX_DLYS[s.vox_dly]))) + cf.append( + RadioSetting("lang", + "Menu Language(14)", + RadioSettingValueList(LANGUAGE_LIST, + LANGUAGE_LIST[s.lang]))) + cf.append(RadioSetting("ponmsg", + "Poweron message(40)", + RadioSettingValueList( + PONMSG_LIST, PONMSG_LIST[s.ponmsg]))) + cf.append(RadioSetting("bledsw", + "Receive LED(42)", + RadioSettingValueBoolean(s.bledsw))) + return cf + + def _repeater_tab(self): + """Repeater mode functions + """ + s = self._memobj.settings + cf = RadioSettingGroup("repeater", "Repeater Functions") + + cf.append( + RadioSetting("type_set", + "Radio Mode(43)", + RadioSettingValueList( + RPTMODE_LIST, + RPTMODE_LIST[s.type_set]))) + cf.append(RadioSetting("rpt_ptt", + "Repeater PTT(45)", + RadioSettingValueBoolean(s.rpt_ptt))) + cf.append(RadioSetting("rpt_spk", + "Repeater Mode Speaker(44)", + RadioSettingValueBoolean(s.rpt_spk))) + cf.append( + RadioSetting("rpt_kpt", + "Repeater Hold Time(46)", + RadioSettingValueList(RPT_KPTS, + RPT_KPTS[s.rpt_kpt]))) + cf.append(RadioSetting("rpt_rct", + "Repeater Receipt Tone(47)", + RadioSettingValueBoolean(s.rpt_rct))) + return cf + + def _admin_tab(self): + """Admin functions not present in radio menu... + These are admin functions not radio operation configuration + """ + + def apply_cid(setting, obj): + c = str2callid(setting.value) + obj.code = c + + def apply_scc(setting, obj): + c = str2digits(setting.value) + obj.scc = c + + def apply_mode_sw(setting, obj): + pw = str2pw(setting.value) + obj.mode_sw = pw + setting.value = pw2str(obj.mode_sw) + + def apply_reset(setting, obj): + pw = str2pw(setting.value) + obj.reset = pw + setting.value = pw2str(obj.reset) + + def apply_wake(setting, obj): + obj.wake = int(setting.value)/10 + + def apply_sleep(setting, obj): + obj.sleep = int(setting.value)/10 + + pw = self._memobj.passwords # admin passwords + s = self._memobj.settings + + cf = RadioSettingGroup("admin", "Admin Functions") + + cf.append(RadioSetting("menu_avail", + "Menu available in channel mode", + RadioSettingValueBoolean(s.menu_avail))) + mode_sw = RadioSettingValueString(0, 6, + pw2str(pw.mode_sw), False) + rs = RadioSetting("passwords.mode_sw", + "Mode Switch Password", mode_sw) + rs.set_apply_callback(apply_mode_sw, pw) + cf.append(rs) + + cf.append(RadioSetting("reset_avail", + "Radio Reset Available", + RadioSettingValueBoolean(s.reset_avail))) + reset = RadioSettingValueString(0, 6, pw2str(pw.reset), False) + rs = RadioSetting("passwords.reset", + "Radio Reset Password", reset) + rs.set_apply_callback(apply_reset, pw) + cf.append(rs) + + cf.append( + RadioSetting("dtmf_tx", + "DTMF Tx Duration", + RadioSettingValueList(DTMF_TIMES, + DTMF_TIMES[s.dtmf_tx]))) + cid = self._memobj.my_callid + my_callid = RadioSettingValueString(3, 6, + callid2str(cid.code), False) + rs = RadioSetting("my_callid.code", + "PTT Caller ID code(24)", my_callid) + rs.set_apply_callback(apply_cid, cid) + cf.append(rs) + + stun = self._memobj.stun + st = RadioSettingValueString(0, 6, digits2str(stun.scc), False) + rs = RadioSetting("stun.scc", "Security code", st) + rs.set_apply_callback(apply_scc, stun) + cf.append(rs) + + cf.append( + RadioSetting("settings.save_m", + "Save Mode (2)", + RadioSettingValueList(SAVE_MODES, + SAVE_MODES[s.save_m]))) + for i in range(0, 4): + sm = self._memobj.save[i] + wake = RadioSettingValueInteger(0, 18000, sm.wake * 10, 1) + wf = RadioSetting("save[%i].wake" % i, + "Save Mode %d Wake Time" % (i+1), wake) + wf.set_apply_callback(apply_wake, sm) + cf.append(wf) + + slp = RadioSettingValueInteger(0, 18000, sm.sleep * 10, 1) + wf = RadioSetting("save[%i].sleep" % i, + "Save Mode %d Sleep Time" % (i+1), slp) + wf.set_apply_callback(apply_sleep, sm) + cf.append(wf) + + _msg = str(self._memobj.display.banner).split("\0")[0] + val = RadioSettingValueString(0, 16, _msg) + val.set_mutable(True) + cf.append(RadioSetting("display.banner", + "Display Message", val)) + return cf + + def _fm_tab(self): + """FM Broadcast channels + """ + def apply_fm(setting, obj): + f = freq2short(setting.value, 76000000, 108000000) + obj.fm_freq = f + + fm = RadioSettingGroup("fm_chans", "FM Broadcast") + for ch in range(0, 20): + chan = self._memobj.fm_chans[ch] + freq = RadioSettingValueString(0, 20, + short2freq(chan.fm_freq)) + rs = RadioSetting("fm_%d" % (ch + 1), + "FM Channel %d" % (ch + 1), freq) + rs.set_apply_callback(apply_fm, chan) + fm.append(rs) + return fm + + def _scan_grp(self): + """Scan groups + """ + def apply_name(setting, obj): + name = str2name(setting.value, 8, '\0', '\0') + obj.name = name + + def apply_start(setting, obj): + """Do a callback to deal with RadioSettingInteger limitation + on memory address resolution + """ + obj.scan_st = int(setting.value) + + def apply_end(setting, obj): + """Do a callback to deal with RadioSettingInteger limitation + on memory address resolution + """ + obj.scan_end = int(setting.value) + + sgrp = self._memobj.scn_grps + scan = RadioSettingGroup("scn_grps", "Channel Scanner Groups") + for i in range(0, 10): + s_grp = sgrp.addrs[i] + s_name = sgrp.names[i] + rs_name = RadioSettingValueString(0, 8, + name2str(s_name.name)) + rs = RadioSetting("scn_grps.names[%i].name" % i, + "Group %i Name" % (i + 1), rs_name) + rs.set_apply_callback(apply_name, s_name) + scan.append(rs) + rs_st = RadioSettingValueInteger(1, 999, s_grp.scan_st) + rs = RadioSetting("scn_grps.addrs[%i].scan_st" % i, + "Starting Channel", rs_st) + rs.set_apply_callback(apply_start, s_grp) + scan.append(rs) + rs_end = RadioSettingValueInteger(1, 999, s_grp.scan_end) + rs = RadioSetting("scn_grps.addrs[%i].scan_end" % i, + "Last Channel", rs_end) + rs.set_apply_callback(apply_end, s_grp) + scan.append(rs) + return scan + + def _callid_grp(self): + """Caller IDs to be recognized by radio + This really should be a table in the UI + """ + def apply_callid(setting, obj): + c = str2callid(setting.value) + obj.cid = c + + def apply_name(setting, obj): + name = str2name(setting.value, 6, '\0', '\xff') + obj.name = name + + cid = RadioSettingGroup("callids", "Caller IDs") + for i in range(0, 20): + callid = self._memobj.call_ids[i] + name = self._memobj.cid_names[i] + c_name = RadioSettingValueString(0, 6, name2str(name.name)) + rs = RadioSetting("cid_names[%i].name" % i, + "Caller ID %i Name" % (i + 1), c_name) + rs.set_apply_callback(apply_name, name) + cid.append(rs) + c_id = RadioSettingValueString(0, 6, + callid2str(callid.cid), + False) + rs = RadioSetting("call_ids[%i].cid" % i, + "Caller ID Code", c_id) + rs.set_apply_callback(apply_callid, callid) + cid.append(rs) + return cid + + def _band_tab(self, area, band): + """ Build a band tab inside a VFO/Area + """ + def apply_freq(setting, lo, hi, obj): + f = freq2int(setting.value, lo, hi) + obj.freq = f/10 + + def apply_offset(setting, obj): + f = freq2int(setting.value, 0, 5000000) + obj.offset = f/10 + + def apply_enc(setting, obj): + t = tone2short(setting.value) + obj.encqt = t + + def apply_dec(setting, obj): + t = tone2short(setting.value) + obj.decqt = t + + if area == "a": + if band == 150: + c = self._memobj.vfo_a.band_150 + lo = 108000000 + hi = 180000000 + elif band == 200: + c = self._memobj.vfo_a.band_200 + lo = 230000000 + hi = 250000000 + elif band == 300: + c = self._memobj.vfo_a.band_300 + lo = 350000000 + hi = 400000000 + elif band == 450: + c = self._memobj.vfo_a.band_450 + lo = 400000000 + hi = 512000000 + else: # 700 + c = self._memobj.vfo_a.band_700 + lo = 700000000 + hi = 985000000 + else: # area 'b' + if band == 150: + c = self._memobj.vfo_b.band_150 + lo = 136000000 + hi = 180000000 + else: # 450 + c = self._memobj.vfo_b.band_450 + lo = 400000000 + hi = 512000000 + + prefix = "vfo_%s.band_%d" % (area, band) + bf = RadioSettingGroup(prefix, "%dMHz Band" % band) + freq = RadioSettingValueString(0, 15, int2freq(c.freq * 10)) + rs = RadioSetting(prefix + ".freq", "Rx Frequency", freq) + rs.set_apply_callback(apply_freq, lo, hi, c) + bf.append(rs) + + off = RadioSettingValueString(0, 15, int2freq(c.offset * 10)) + rs = RadioSetting(prefix + ".offset", "Tx Offset(28)", off) + rs.set_apply_callback(apply_offset, c) + bf.append(rs) + + rs = RadioSetting(prefix + ".encqt", + "Encode QT(17,19)", + RadioSettingValueList(TONE_LIST, + short2tone(c.encqt))) + rs.set_apply_callback(apply_enc, c) + bf.append(rs) + + rs = RadioSetting(prefix + ".decqt", + "Decode QT(16,18)", + RadioSettingValueList(TONE_LIST, + short2tone(c.decqt))) + rs.set_apply_callback(apply_dec, c) + bf.append(rs) + + bf.append(RadioSetting(prefix + ".qt", + "Mute Mode(21)", + RadioSettingValueList(SPMUTE_LIST, + SPMUTE_LIST[c.qt]))) + bf.append(RadioSetting(prefix + ".scan", + "Scan this(48)", + RadioSettingValueBoolean(c.scan))) + bf.append(RadioSetting(prefix + ".pwr", + "Power(5)", + RadioSettingValueList( + POWER_LIST, POWER_LIST[c.pwr]))) + bf.append(RadioSetting(prefix + ".mod", + "AM Modulation(54)", + RadioSettingValueBoolean(c.mod))) + bf.append(RadioSetting(prefix + ".fm_dev", + "FM Deviation(4)", + RadioSettingValueList( + BANDWIDTH_LIST, + BANDWIDTH_LIST[c.fm_dev]))) + bf.append( + RadioSetting(prefix + ".shift", + "Frequency Shift(6)", + RadioSettingValueList(OFFSET_LIST, + OFFSET_LIST[c.shift]))) + return bf + + def _area_tab(self, area): + """Build a VFO tab + """ + def apply_scan_st(setting, scan_lo, scan_hi, obj): + f = freq2short(setting.value, scan_lo, scan_hi) + obj.scan_st = f + + def apply_scan_end(setting, scan_lo, scan_hi, obj): + f = freq2short(setting.value, scan_lo, scan_hi) + obj.scan_end = f + + if area == "a": + desc = "Area A Settings" + c = self._memobj.a_conf + scan_lo = 108000000 + scan_hi = 985000000 + scan_rng = self._memobj.settings.a + band_list = (150, 200, 300, 450, 700) + else: + desc = "Area B Settings" + c = self._memobj.b_conf + scan_lo = 136000000 + scan_hi = 512000000 + scan_rng = self._memobj.settings.b + band_list = (150, 450) + + prefix = "%s_conf" % area + af = RadioSettingGroup(prefix, desc) + af.append( + RadioSetting(prefix + ".w_mode", + "Workmode", + RadioSettingValueList( + WORKMODE_LIST, + WORKMODE_LIST[c.w_mode]))) + af.append(RadioSetting(prefix + ".w_chan", + "Channel", + RadioSettingValueInteger(1, 999, + c.w_chan))) + af.append( + RadioSetting(prefix + ".scan_grp", + "Scan Group(49)", + RadioSettingValueList( + SCANGRP_LIST, + SCANGRP_LIST[c.scan_grp]))) + af.append(RadioSetting(prefix + ".bcl", + "Busy Channel Lock-out(15)", + RadioSettingValueBoolean(c.bcl))) + af.append( + RadioSetting(prefix + ".sql", + "Squelch Level(8)", + RadioSettingValueList(LIST_0_9, + LIST_0_9[c.sql]))) + af.append( + RadioSetting(prefix + ".cset", + "Call ID Group(52)", + RadioSettingValueList(LIST_1_20, + LIST_1_20[c.cset]))) + af.append( + RadioSetting(prefix + ".step", + "Frequency Step(3)", + RadioSettingValueList( + STEP_LIST, STEP_LIST[c.step]))) + af.append( + RadioSetting(prefix + ".scan_mode", + "Scan Mode(20)", + RadioSettingValueList( + SCANMODE_LIST, + SCANMODE_LIST[c.scan_mode]))) + af.append( + RadioSetting(prefix + ".scan_range", + "Scan Range(50)", + RadioSettingValueList( + SCANRANGE_LIST, + SCANRANGE_LIST[c.scan_range]))) + st = RadioSettingValueString(0, 15, + short2freq(scan_rng.scan_st)) + rs = RadioSetting("settings.%s.scan_st" % area, + "Frequency Scan Start", st) + rs.set_apply_callback(apply_scan_st, scan_lo, scan_hi, scan_rng) + af.append(rs) + + end = RadioSettingValueString(0, 15, + short2freq(scan_rng.scan_end)) + rs = RadioSetting("settings.%s.scan_end" % area, + "Frequency Scan End", end) + rs.set_apply_callback(apply_scan_end, scan_lo, scan_hi, + scan_rng) + af.append(rs) + # Each area has its own set of bands + for band in (band_list): + af.append(self._band_tab(area, band)) + return af + + def _key_tab(self): + """Build radio key/button menu + """ + s = self._memobj.settings + kf = RadioSettingGroup("key_grp", "Key Settings") + + kf.append(RadioSetting("settings.pf1", + "PF1 Key function(55)", + RadioSettingValueList( + PF1KEY_LIST, + PF1KEY_LIST[s.pf1]))) + kf.append(RadioSetting("settings.pf2", + "PF2 Key function(56)", + RadioSettingValueList( + PF2KEY_LIST, + PF2KEY_LIST[s.pf2]))) + kf.append(RadioSetting("settings.pf3", + "PF3 Key function(57)", + RadioSettingValueList( + PF3KEY_LIST, + PF3KEY_LIST[s.pf3]))) + return kf + + def _get_settings(self): + """Build the radio configuration settings menus + """ + + core_grp = self._core_tab() + fm_grp = self._fm_tab() + area_a_grp = self._area_tab("a") + area_b_grp = self._area_tab("b") + key_grp = self._key_tab() + scan_grp = self._scan_grp() + callid_grp = self._callid_grp() + admin_grp = self._admin_tab() + rpt_grp = self._repeater_tab() + + core_grp.append(key_grp) + core_grp.append(admin_grp) + core_grp.append(rpt_grp) + group = RadioSettings(core_grp, + area_a_grp, + area_b_grp, + fm_grp, + scan_grp, + callid_grp + ) + return group + + def get_settings(self): + """ Public build out linkage between radio settings and UI + """ + try: + return self._get_settings() + except Exception: + import traceback + LOG.error("Failed to parse settings: %s", + traceback.format_exc()) + return None + + def _is_freq(self, element): + """This is a hack to smoke out whether we need to do + frequency translations for otherwise innocent u16s and u32s + """ + return "rxfreq" in element.get_name() or \ + "txfreq" in element.get_name() or \ + "scan_st" in element.get_name() or \ + "scan_end" in element.get_name() or \ + "offset" in element.get_name() or \ + "fm_stop" in element.get_name() + + def set_settings(self, settings): + """ Public update radio settings via UI callback + A lot of this should be in common code.... + """ + + for element in settings: + if not isinstance(element, RadioSetting): + LOG.debug("set_settings: not instance %s" % + element.get_name()) + self.set_settings(element) + continue + else: + try: + if "." in element.get_name(): + bits = element.get_name().split(".") + obj = self._memobj + for bit in bits[:-1]: + # decode an array index + if "[" in bit and "]" in bit: + bit, index = bit.split("[", 1) + index, junk = index.split("]", 1) + index = int(index) + obj = getattr(obj, bit)[index] + else: + obj = getattr(obj, bit) + setting = bits[-1] + else: + obj = self._memobj.settings + setting = element.get_name() + + if element.has_apply_callback(): + LOG.debug("Using apply callback") + element.run_apply_callback() + else: + LOG.debug("Setting %s = %s" % + (setting, element.value)) + if self._is_freq(element): + setattr(obj, setting, int(element.value)/10) + else: + setattr(obj, setting, element.value) + except Exception, e: + LOG.debug("set_settings: Exception with %s" % + element.get_name()) + raise -- Jim Lieb Mobile: 831-295-9317 GPG Key: 79BB52C7BD0530F5 "If ease of use was the only requirement, we would all be riding tricycles" - Douglas Engelbart 1925–2013

2 1

[chirp_devel] Build test results: Successful
by Build System 04 Dec '18

04 Dec '18

Tested changes: Changes for Build #764 [Vincent Stipo <v(a)xpctech.com>] [FT818] New Model Support Yaesu FT-818 #5607 [Tom Hayward <tom(a)tomh.us>] [id880] Fix typo in charset definition. #281 [Tom Hayward <tom(a)tomh.us>] [thf6a] Support full charset (ASCII). Fixes #141 [Tom Hayward <tom(a)tomh.us>] [id880] Support full charset. Fixes #281 [Tom Hayward <tom(a)tomh.us>] [vx5] Support full charset (ASCII). Fixes #292 [Tom Hayward <tom(a)tomh.us>] [id31a] set used bit when creating new memory, clear when deleting. Fixes #269 [Tom Hayward <tom(a)tomh.us>] Support PyGTK < 2.22 in bank edit. Fixes #231 [Tom Hayward <tom(a)tomh.us>] [d710] [v71] [d72] Fix tone list (not all tones are supported). Fixes #212 [Dan Smith <dsmith(a)danplanet.com>] [vx7] Fix setting memory power levels on 220MHz band Fixes #214 [Dan Smith <dsmith(a)danplanet.com>] fips: Pennsylvania FIPS code was wrong. #117 [Marco Filippi <iz3gme.marco(a)gmail.com>] Consider lower bound frequency of each valid_band as valid Fix bug #181 [Tom Hayward <tom(a)tomh.us>] tmd700: allow 8-char names. Fixes #176 [Dan Smith <dsmith(a)danplanet.com>] Fix the "blind deletion" problem, as well as properly direct copy/paste Fixes #172 [David Griffith <dave(a)661.org>] Bug #155 fix: VX-7 1.25m power levels [David Griffith <dave(a)661.org>] New INSTALL and README files Fixes #122 [Tom Hayward <tom(a)tomh.us>] thd72: only use hardware flow on OS X. Fixes #166 [Marco Filippi <iz3gme.marco(a)gmail.com>] [FT817] Tone freq not set correctly Same as #88 for FT857, to avoid code duplication fix code have been moved from ft857 to its ancestor class Fix bug #163 [Tom Hayward <tom(a)tomh.us>] Fix Mac .app so paths with spaces work. Fixes Bug #145 Full log: [...truncated 233 lines...] Testing Icom IC-T8A banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_IcomICT8A) Testing Icom IC-T8A brute force ... ok test_clone (tests.TestCase_IcomICT8A) Testing Icom IC-T8A clone ... ok test_copy_all (tests.TestCase_IcomICT8A) Testing Icom IC-T8A copy all ... ok test_detect (tests.TestCase_IcomICT8A) Testing Icom IC-T8A detect ... ok test_edges (tests.TestCase_IcomICT8A) Testing Icom IC-T8A edges ... ok test_settings (tests.TestCase_IcomICT8A) Testing Icom IC-T8A settings ... skipped 'Settings not supported' test_banks (tests.TestCase_TYTTH9800) Testing TYT TH-9800 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TYTTH9800) Testing TYT TH-9800 brute force ... ok test_clone (tests.TestCase_TYTTH9800) Testing TYT TH-9800 clone ... ok test_copy_all (tests.TestCase_TYTTH9800) Testing TYT TH-9800 copy all ... ok test_detect (tests.TestCase_TYTTH9800) Testing TYT TH-9800 detect ... ok test_edges (tests.TestCase_TYTTH9800) Testing TYT TH-9800 edges ... ok test_settings (tests.TestCase_TYTTH9800) Testing TYT TH-9800 settings ... ok test_banks (tests.TestCase_KenwoodTK8102) Testing Kenwood TK-8102 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_KenwoodTK8102) Testing Kenwood TK-8102 brute force ... ok test_clone (tests.TestCase_KenwoodTK8102) Testing Kenwood TK-8102 clone ... ok test_copy_all (tests.TestCase_KenwoodTK8102) Testing Kenwood TK-8102 copy all ... ok test_detect (tests.TestCase_KenwoodTK8102) Testing Kenwood TK-8102 detect ... ok test_edges (tests.TestCase_KenwoodTK8102) Testing Kenwood TK-8102 edges ... ok test_settings (tests.TestCase_KenwoodTK8102) Testing Kenwood TK-8102 settings ... ok test_banks (tests.TestCase_IcomID51Plus) Testing Icom ID-51 Plus banks ... ok test_brute_force (tests.TestCase_IcomID51Plus) Testing Icom ID-51 Plus brute force ... ok test_clone (tests.TestCase_IcomID51Plus) Testing Icom ID-51 Plus clone ... ok test_copy_all (tests.TestCase_IcomID51Plus) Testing Icom ID-51 Plus copy all ... ok test_detect (tests.TestCase_IcomID51Plus) Testing Icom ID-51 Plus detect ... ok test_edges (tests.TestCase_IcomID51Plus) Testing Icom ID-51 Plus edges ... ok test_settings (tests.TestCase_IcomID51Plus) Testing Icom ID-51 Plus settings ... ok test_banks (tests.TestCase_BTECHMURSV1) Testing BTECH MURS-V1 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHMURSV1) Testing BTECH MURS-V1 brute force ... ok test_clone (tests.TestCase_BTECHMURSV1) Testing BTECH MURS-V1 clone ... ok test_copy_all (tests.TestCase_BTECHMURSV1) Testing BTECH MURS-V1 copy all ... ok test_detect (tests.TestCase_BTECHMURSV1) Testing BTECH MURS-V1 detect ... ok test_edges (tests.TestCase_BTECHMURSV1) Testing BTECH MURS-V1 edges ... skipped 'No mutable memory locations found' test_settings (tests.TestCase_BTECHMURSV1) Testing BTECH MURS-V1 settings ... ok test_banks (tests.TestCase_YaesuFT2800M) Testing Yaesu FT-2800M banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT2800M) Testing Yaesu FT-2800M brute force ... ok test_clone (tests.TestCase_YaesuFT2800M) Testing Yaesu FT-2800M clone ... ok test_copy_all (tests.TestCase_YaesuFT2800M) Testing Yaesu FT-2800M copy all ... ok test_detect (tests.TestCase_YaesuFT2800M) Testing Yaesu FT-2800M detect ... ok test_edges (tests.TestCase_YaesuFT2800M) Testing Yaesu FT-2800M edges ... ok test_settings (tests.TestCase_YaesuFT2800M) Testing Yaesu FT-2800M settings ... skipped 'Settings not supported' test_banks (tests.TestCase_BTECHUV5001) Testing BTECH UV-5001 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHUV5001) Testing BTECH UV-5001 brute force ... ok test_clone (tests.TestCase_BTECHUV5001) Testing BTECH UV-5001 clone ... ok test_copy_all (tests.TestCase_BTECHUV5001) Testing BTECH UV-5001 copy all ... ok test_detect (tests.TestCase_BTECHUV5001) Testing BTECH UV-5001 detect ... ok test_edges (tests.TestCase_BTECHUV5001) Testing BTECH UV-5001 edges ... ok test_settings (tests.TestCase_BTECHUV5001) Testing BTECH UV-5001 settings ... ok test_banks (tests.TestCase_BTECHUV25X2) Testing BTECH UV-25X2 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHUV25X2) Testing BTECH UV-25X2 brute force ... ok test_clone (tests.TestCase_BTECHUV25X2) Testing BTECH UV-25X2 clone ... ok test_copy_all (tests.TestCase_BTECHUV25X2) Testing BTECH UV-25X2 copy all ... ok test_detect (tests.TestCase_BTECHUV25X2) Testing BTECH UV-25X2 detect ... ok test_edges (tests.TestCase_BTECHUV25X2) Testing BTECH UV-25X2 edges ... ok test_settings (tests.TestCase_BTECHUV25X2) Testing BTECH UV-25X2 settings ... ok test_banks (tests.TestCase_TYTTHUV3R25) Testing TYT TH-UV3R-25 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TYTTHUV3R25) Testing TYT TH-UV3R-25 brute force ... ok test_clone (tests.TestCase_TYTTHUV3R25) Testing TYT TH-UV3R-25 clone ... ok test_copy_all (tests.TestCase_TYTTHUV3R25) Testing TYT TH-UV3R-25 copy all ... ok test_detect (tests.TestCase_TYTTHUV3R25) Testing TYT TH-UV3R-25 detect ... ok test_edges (tests.TestCase_TYTTHUV3R25) Testing TYT TH-UV3R-25 edges ... ok test_settings (tests.TestCase_TYTTHUV3R25) Testing TYT TH-UV3R-25 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_IcomID880H) Testing Icom ID-880H banks ... ok test_brute_force (tests.TestCase_IcomID880H) Testing Icom ID-880H brute force ... ok test_clone (tests.TestCase_IcomID880H) Testing Icom ID-880H clone ... ok test_copy_all (tests.TestCase_IcomID880H) Testing Icom ID-880H copy all ... ok test_detect (tests.TestCase_IcomID880H) Testing Icom ID-880H detect ... ok test_edges (tests.TestCase_IcomID880H) Testing Icom ID-880H edges ... ok test_settings (tests.TestCase_IcomID880H) Testing Icom ID-880H settings ... ok test_banks (tests.TestCase_YaesuFT70D) Testing Yaesu FT-70D banks ... ok test_brute_force (tests.TestCase_YaesuFT70D) Testing Yaesu FT-70D brute force ... ok test_clone (tests.TestCase_YaesuFT70D) Testing Yaesu FT-70D clone ... ok test_copy_all (tests.TestCase_YaesuFT70D) Testing Yaesu FT-70D copy all ... ok test_detect (tests.TestCase_YaesuFT70D) Testing Yaesu FT-70D detect ... ok test_edges (tests.TestCase_YaesuFT70D) Testing Yaesu FT-70D edges ... ok test_settings (tests.TestCase_YaesuFT70D) Testing Yaesu FT-70D settings ... ok test_banks (tests.TestCase_RetevisRT26) Testing Retevis RT26 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RetevisRT26) Testing Retevis RT26 brute force ... ok test_clone (tests.TestCase_RetevisRT26) Testing Retevis RT26 clone ... ok test_copy_all (tests.TestCase_RetevisRT26) Testing Retevis RT26 copy all ... ok test_detect (tests.TestCase_RetevisRT26) Testing Retevis RT26 detect ... ok test_edges (tests.TestCase_RetevisRT26) Testing Retevis RT26 edges ... ok test_settings (tests.TestCase_RetevisRT26) Testing Retevis RT26 settings ... ok test_banks (tests.TestCase_BaofengUV6R) Testing Baofeng UV-6R banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BaofengUV6R) Testing Baofeng UV-6R brute force ... ok test_clone (tests.TestCase_BaofengUV6R) Testing Baofeng UV-6R clone ... ok test_copy_all (tests.TestCase_BaofengUV6R) Testing Baofeng UV-6R copy all ... ok test_detect (tests.TestCase_BaofengUV6R) Testing Baofeng UV-6R detect ... ok test_edges (tests.TestCase_BaofengUV6R) Testing Baofeng UV-6R edges ... ok test_settings (tests.TestCase_BaofengUV6R) Testing Baofeng UV-6R settings ... ok test_banks (tests.TestCase_WouxunKGUV6) Testing Wouxun KG-UV6 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_WouxunKGUV6) Testing Wouxun KG-UV6 brute force ... ok test_clone (tests.TestCase_WouxunKGUV6) Testing Wouxun KG-UV6 clone ... ok test_copy_all (tests.TestCase_WouxunKGUV6) Testing Wouxun KG-UV6 copy all ... ok test_detect (tests.TestCase_WouxunKGUV6) Testing Wouxun KG-UV6 detect ... ok test_edges (tests.TestCase_WouxunKGUV6) Testing Wouxun KG-UV6 edges ... ok test_settings (tests.TestCase_WouxunKGUV6) Testing Wouxun KG-UV6 settings ... ok test_banks (tests.TestCase_PuxingPX2R) Testing Puxing PX-2R banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_PuxingPX2R) Testing Puxing PX-2R brute force ... ok test_clone (tests.TestCase_PuxingPX2R) Testing Puxing PX-2R clone ... ok test_copy_all (tests.TestCase_PuxingPX2R) Testing Puxing PX-2R copy all ... ok test_detect (tests.TestCase_PuxingPX2R) Testing Puxing PX-2R detect ... ok test_edges (tests.TestCase_PuxingPX2R) Testing Puxing PX-2R edges ... ok test_settings (tests.TestCase_PuxingPX2R) Testing Puxing PX-2R settings ... skipped 'Settings not supported' test_banks (tests.TestCase_YaesuFT817ND) Testing Yaesu FT-817ND banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT817ND) Testing Yaesu FT-817ND brute force ... ok test_clone (tests.TestCase_YaesuFT817ND) Testing Yaesu FT-817ND clone ... ok test_copy_all (tests.TestCase_YaesuFT817ND) Testing Yaesu FT-817ND copy all ... ok test_detect (tests.TestCase_YaesuFT817ND) Testing Yaesu FT-817ND detect ... ok test_edges (tests.TestCase_YaesuFT817ND) Testing Yaesu FT-817ND edges ... ok test_settings (tests.TestCase_YaesuFT817ND) Testing Yaesu FT-817ND settings ... ok test_banks (tests.TestCase_IcomIC2820H) Testing Icom IC-2820H banks ... ok test_brute_force (tests.TestCase_IcomIC2820H) Testing Icom IC-2820H brute force ... ok test_clone (tests.TestCase_IcomIC2820H) Testing Icom IC-2820H clone ... ok test_copy_all (tests.TestCase_IcomIC2820H) Testing Icom IC-2820H copy all ... ok test_detect (tests.TestCase_IcomIC2820H) Testing Icom IC-2820H detect ... ok test_edges (tests.TestCase_IcomIC2820H) Testing Icom IC-2820H edges ... ok test_settings (tests.TestCase_IcomIC2820H) Testing Icom IC-2820H settings ... ok test_banks (tests.TestCase_JetstreamJT220M) Testing Jetstream JT220M banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_JetstreamJT220M) Testing Jetstream JT220M brute force ... ok test_clone (tests.TestCase_JetstreamJT220M) Testing Jetstream JT220M clone ... ok test_copy_all (tests.TestCase_JetstreamJT220M) Testing Jetstream JT220M copy all ... ok test_detect (tests.TestCase_JetstreamJT220M) Testing Jetstream JT220M detect ... ok test_edges (tests.TestCase_JetstreamJT220M) Testing Jetstream JT220M edges ... ok test_settings (tests.TestCase_JetstreamJT220M) Testing Jetstream JT220M settings ... skipped 'Settings not supported' test_banks (tests.TestCase_AlincoDJ596) Testing Alinco DJ596 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_AlincoDJ596) Testing Alinco DJ596 brute force ... ok test_clone (tests.TestCase_AlincoDJ596) Testing Alinco DJ596 clone ... ok test_copy_all (tests.TestCase_AlincoDJ596) Testing Alinco DJ596 copy all ... ok test_detect (tests.TestCase_AlincoDJ596) Testing Alinco DJ596 detect ... ok test_edges (tests.TestCase_AlincoDJ596) Testing Alinco DJ596 edges ... ok test_settings (tests.TestCase_AlincoDJ596) Testing Alinco DJ596 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_JetstreamJT270MH) Testing Jetstream JT270MH banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_JetstreamJT270MH) Testing Jetstream JT270MH brute force ... ok test_clone (tests.TestCase_JetstreamJT270MH) Testing Jetstream JT270MH clone ... ok test_copy_all (tests.TestCase_JetstreamJT270MH) Testing Jetstream JT270MH copy all ... ok test_detect (tests.TestCase_JetstreamJT270MH) Testing Jetstream JT270MH detect ... ok test_edges (tests.TestCase_JetstreamJT270MH) Testing Jetstream JT270MH edges ... ok test_settings (tests.TestCase_JetstreamJT270MH) Testing Jetstream JT270MH settings ... ok test_banks (tests.TestCase_BTECHUV2501220) Testing BTECH UV-2501+220 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHUV2501220) Testing BTECH UV-2501+220 brute force ... ok test_clone (tests.TestCase_BTECHUV2501220) Testing BTECH UV-2501+220 clone ... ok test_copy_all (tests.TestCase_BTECHUV2501220) Testing BTECH UV-2501+220 copy all ... ok test_detect (tests.TestCase_BTECHUV2501220) Testing BTECH UV-2501+220 detect ... ok test_edges (tests.TestCase_BTECHUV2501220) Testing BTECH UV-2501+220 edges ... ok test_settings (tests.TestCase_BTECHUV2501220) Testing BTECH UV-2501+220 settings ... ok test_banks (tests.TestCase_BTECHUV50X2) Testing BTECH UV-50X2 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHUV50X2) Testing BTECH UV-50X2 brute force ... ok test_clone (tests.TestCase_BTECHUV50X2) Testing BTECH UV-50X2 clone ... ok test_copy_all (tests.TestCase_BTECHUV50X2) Testing BTECH UV-50X2 copy all ... ok test_detect (tests.TestCase_BTECHUV50X2) Testing BTECH UV-50X2 detect ... ok test_edges (tests.TestCase_BTECHUV50X2) Testing BTECH UV-50X2 edges ... ok test_settings (tests.TestCase_BTECHUV50X2) Testing BTECH UV-50X2 settings ... ok test_banks (tests.TestCase_IcomICT7H) Testing Icom IC-T7H banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_IcomICT7H) Testing Icom IC-T7H brute force ... ok test_clone (tests.TestCase_IcomICT7H) Testing Icom IC-T7H clone ... ok test_copy_all (tests.TestCase_IcomICT7H) Testing Icom IC-T7H copy all ... ok test_detect (tests.TestCase_IcomICT7H) Testing Icom IC-T7H detect ... ok test_edges (tests.TestCase_IcomICT7H) Testing Icom IC-T7H edges ... ok test_settings (tests.TestCase_IcomICT7H) Testing Icom IC-T7H settings ... skipped 'Settings not supported' test_banks (tests.TestCase_BaojieBJ9900) Testing Baojie BJ-9900 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BaojieBJ9900) Testing Baojie BJ-9900 brute force ... ok test_clone (tests.TestCase_BaojieBJ9900) Testing Baojie BJ-9900 clone ... ok test_copy_all (tests.TestCase_BaojieBJ9900) Testing Baojie BJ-9900 copy all ... ok test_detect (tests.TestCase_BaojieBJ9900) Testing Baojie BJ-9900 detect ... ok test_edges (tests.TestCase_BaojieBJ9900) Testing Baojie BJ-9900 edges ... ok test_settings (tests.TestCase_BaojieBJ9900) Testing Baojie BJ-9900 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_IcomIC2300H) Testing Icom IC-2300H banks ... ok test_brute_force (tests.TestCase_IcomIC2300H) Testing Icom IC-2300H brute force ... ok test_clone (tests.TestCase_IcomIC2300H) Testing Icom IC-2300H clone ... ok test_copy_all (tests.TestCase_IcomIC2300H) Testing Icom IC-2300H copy all ... ok test_detect (tests.TestCase_IcomIC2300H) Testing Icom IC-2300H detect ... ok test_edges (tests.TestCase_IcomIC2300H) Testing Icom IC-2300H edges ... ok test_settings (tests.TestCase_IcomIC2300H) Testing Icom IC-2300H settings ... ok test_banks (tests.TestCase_YaesuVX7) Testing Yaesu VX-7 banks ... ok test_brute_force (tests.TestCase_YaesuVX7) Testing Yaesu VX-7 brute force ... ok test_clone (tests.TestCase_YaesuVX7) Testing Yaesu VX-7 clone ... ok test_copy_all (tests.TestCase_YaesuVX7) Testing Yaesu VX-7 copy all ... ok test_detect (tests.TestCase_YaesuVX7) Testing Yaesu VX-7 detect ... ok test_edges (tests.TestCase_YaesuVX7) Testing Yaesu VX-7 edges ... ok test_settings (tests.TestCase_YaesuVX7) Testing Yaesu VX-7 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_TDXoneTDQ8A) Testing TDXone TD-Q8A banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TDXoneTDQ8A) Testing TDXone TD-Q8A brute force ... ok test_clone (tests.TestCase_TDXoneTDQ8A) Testing TDXone TD-Q8A clone ... ok test_copy_all (tests.TestCase_TDXoneTDQ8A) Testing TDXone TD-Q8A copy all ... ok test_detect (tests.TestCase_TDXoneTDQ8A) Testing TDXone TD-Q8A detect ... ok test_edges (tests.TestCase_TDXoneTDQ8A) Testing TDXone TD-Q8A edges ... ok test_settings (tests.TestCase_TDXoneTDQ8A) Testing TDXone TD-Q8A settings ... ok test_banks (tests.TestCase_WouxunKG818) Testing Wouxun KG-818 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_WouxunKG818) Testing Wouxun KG-818 brute force ... ok test_clone (tests.TestCase_WouxunKG818) Testing Wouxun KG-818 clone ... ok test_copy_all (tests.TestCase_WouxunKG818) Testing Wouxun KG-818 copy all ... ok test_detect (tests.TestCase_WouxunKG818) Testing Wouxun KG-818 detect ... ok test_edges (tests.TestCase_WouxunKG818) Testing Wouxun KG-818 edges ... ok test_settings (tests.TestCase_WouxunKG818) Testing Wouxun KG-818 settings ... ok test_banks (tests.TestCase_WACCOMMINI8900) Testing WACCOM MINI-8900 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_WACCOMMINI8900) Testing WACCOM MINI-8900 brute force ... ok test_clone (tests.TestCase_WACCOMMINI8900) Testing WACCOM MINI-8900 clone ... ok test_copy_all (tests.TestCase_WACCOMMINI8900) Testing WACCOM MINI-8900 copy all ... ok test_detect (tests.TestCase_WACCOMMINI8900) Testing WACCOM MINI-8900 detect ... ok test_edges (tests.TestCase_WACCOMMINI8900) Testing WACCOM MINI-8900 edges ... ok test_settings (tests.TestCase_WACCOMMINI8900) Testing WACCOM MINI-8900 settings ... ok test_banks (tests.TestCase_BaofengUV3R) Testing Baofeng UV-3R banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BaofengUV3R) Testing Baofeng UV-3R brute force ... ok test_clone (tests.TestCase_BaofengUV3R) Testing Baofeng UV-3R clone ... ok test_copy_all (tests.TestCase_BaofengUV3R) Testing Baofeng UV-3R copy all ... ok test_detect (tests.TestCase_BaofengUV3R) Testing Baofeng UV-3R detect ... ok test_edges (tests.TestCase_BaofengUV3R) Testing Baofeng UV-3R edges ... ok test_settings (tests.TestCase_BaofengUV3R) Testing Baofeng UV-3R settings ... ok test_banks (tests.TestCase_RadioddityR2) Testing Radioddity R2 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RadioddityR2) Testing Radioddity R2 brute force ... ok test_clone (tests.TestCase_RadioddityR2) Testing Radioddity R2 clone ... ok test_copy_all (tests.TestCase_RadioddityR2) Testing Radioddity R2 copy all ... ok test_detect (tests.TestCase_RadioddityR2) Testing Radioddity R2 detect ... ok test_edges (tests.TestCase_RadioddityR2) Testing Radioddity R2 edges ... ok test_settings (tests.TestCase_RadioddityR2) Testing Radioddity R2 settings ... ok test_banks (tests.TestCase_AnyToneTERMN8R) Testing AnyTone TERMN-8R banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_AnyToneTERMN8R) Testing AnyTone TERMN-8R brute force ... ok test_clone (tests.TestCase_AnyToneTERMN8R) Testing AnyTone TERMN-8R clone ... ok test_copy_all (tests.TestCase_AnyToneTERMN8R) Testing AnyTone TERMN-8R copy all ... ok test_detect (tests.TestCase_AnyToneTERMN8R) Testing AnyTone TERMN-8R detect ... ok test_edges (tests.TestCase_AnyToneTERMN8R) Testing AnyTone TERMN-8R edges ... ok test_settings (tests.TestCase_AnyToneTERMN8R) Testing AnyTone TERMN-8R settings ... ok test_banks (tests.TestCase_YaesuFT50) Testing Yaesu FT-50 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT50) Testing Yaesu FT-50 brute force ... ok test_clone (tests.TestCase_YaesuFT50) Testing Yaesu FT-50 clone ... ok test_copy_all (tests.TestCase_YaesuFT50) Testing Yaesu FT-50 copy all ... ok test_detect (tests.TestCase_YaesuFT50) Testing Yaesu FT-50 detect ... ok test_edges (tests.TestCase_YaesuFT50) Testing Yaesu FT-50 edges ... ok test_settings (tests.TestCase_YaesuFT50) Testing Yaesu FT-50 settings ... ok test_banks (tests.TestCase_IcomICP7) Testing Icom IC-P7 banks ... ok test_brute_force (tests.TestCase_IcomICP7) Testing Icom IC-P7 brute force ... ok test_clone (tests.TestCase_IcomICP7) Testing Icom IC-P7 clone ... ok test_copy_all (tests.TestCase_IcomICP7) Testing Icom IC-P7 copy all ... ok test_detect (tests.TestCase_IcomICP7) Testing Icom IC-P7 detect ... ok test_edges (tests.TestCase_IcomICP7) Testing Icom IC-P7 edges ... ok test_settings (tests.TestCase_IcomICP7) Testing Icom IC-P7 settings ... ok test_banks (tests.TestCase_BoblovX3Plus) Testing Boblov X3Plus banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BoblovX3Plus) Testing Boblov X3Plus brute force ... ok test_clone (tests.TestCase_BoblovX3Plus) Testing Boblov X3Plus clone ... ok test_copy_all (tests.TestCase_BoblovX3Plus) Testing Boblov X3Plus copy all ... ok test_detect (tests.TestCase_BoblovX3Plus) Testing Boblov X3Plus detect ... ok test_edges (tests.TestCase_BoblovX3Plus) Testing Boblov X3Plus edges ... ok test_settings (tests.TestCase_BoblovX3Plus) Testing Boblov X3Plus settings ... ok test_banks (tests.TestCase_IcomICW32E) Testing Icom IC-W32E banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_IcomICW32E) Testing Icom IC-W32E brute force ... ok test_clone (tests.TestCase_IcomICW32E) Testing Icom IC-W32E clone ... ok test_copy_all (tests.TestCase_IcomICW32E) Testing Icom IC-W32E copy all ... ok test_detect (tests.TestCase_IcomICW32E) Testing Icom IC-W32E detect ... ok test_edges (tests.TestCase_IcomICW32E) Testing Icom IC-W32E edges ... ok test_settings (tests.TestCase_IcomICW32E) Testing Icom IC-W32E settings ... skipped 'Settings not supported' test_banks (tests.TestCase_JetstreamJT270M) Testing Jetstream JT270M banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_JetstreamJT270M) Testing Jetstream JT270M brute force ... ok test_clone (tests.TestCase_JetstreamJT270M) Testing Jetstream JT270M clone ... ok test_copy_all (tests.TestCase_JetstreamJT270M) Testing Jetstream JT270M copy all ... ok test_detect (tests.TestCase_JetstreamJT270M) Testing Jetstream JT270M detect ... ok test_edges (tests.TestCase_JetstreamJT270M) Testing Jetstream JT270M edges ... ok test_settings (tests.TestCase_JetstreamJT270M) Testing Jetstream JT270M settings ... ok test_banks (tests.TestCase_YaesuFT8900) Testing Yaesu FT-8900 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT8900) Testing Yaesu FT-8900 brute force ... ok test_clone (tests.TestCase_YaesuFT8900) Testing Yaesu FT-8900 clone ... ok test_copy_all (tests.TestCase_YaesuFT8900) Testing Yaesu FT-8900 copy all ... ok test_detect (tests.TestCase_YaesuFT8900) Testing Yaesu FT-8900 detect ... ok test_edges (tests.TestCase_YaesuFT8900) Testing Yaesu FT-8900 edges ... ok test_settings (tests.TestCase_YaesuFT8900) Testing Yaesu FT-8900 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_TYTTH9000144) Testing TYT TH9000_144 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TYTTH9000144) Testing TYT TH9000_144 brute force ... ok test_clone (tests.TestCase_TYTTH9000144) Testing TYT TH9000_144 clone ... ok test_copy_all (tests.TestCase_TYTTH9000144) Testing TYT TH9000_144 copy all ... ok test_detect (tests.TestCase_TYTTH9000144) Testing TYT TH9000_144 detect ... ok test_edges (tests.TestCase_TYTTH9000144) Testing TYT TH9000_144 edges ... ok test_settings (tests.TestCase_TYTTH9000144) Testing TYT TH9000_144 settings ... ok test_banks (tests.TestCase_TYTTHUVF1) Testing TYT TH-UVF1 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TYTTHUVF1) Testing TYT TH-UVF1 brute force ... ok test_clone (tests.TestCase_TYTTHUVF1) Testing TYT TH-UVF1 clone ... ok test_copy_all (tests.TestCase_TYTTHUVF1) Testing TYT TH-UVF1 copy all ... ok test_detect (tests.TestCase_TYTTHUVF1) Testing TYT TH-UVF1 detect ... ok test_edges (tests.TestCase_TYTTHUVF1) Testing TYT TH-UVF1 edges ... ok test_settings (tests.TestCase_TYTTHUVF1) Testing TYT TH-UVF1 settings ... ok test_banks (tests.TestCase_YaesuFT2D) Testing Yaesu FT2D banks ... ok test_brute_force (tests.TestCase_YaesuFT2D) Testing Yaesu FT2D brute force ... ok test_clone (tests.TestCase_YaesuFT2D) Testing Yaesu FT2D clone ... ok test_copy_all (tests.TestCase_YaesuFT2D) Testing Yaesu FT2D copy all ... ok test_detect (tests.TestCase_YaesuFT2D) Testing Yaesu FT2D detect ... ok test_edges (tests.TestCase_YaesuFT2D) Testing Yaesu FT2D edges ... ok test_settings (tests.TestCase_YaesuFT2D) Testing Yaesu FT2D settings ... ok test_banks (tests.TestCase_YaesuFT857897US) Testing Yaesu FT-857/897 (US) banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT857897US) Testing Yaesu FT-857/897 (US) brute force ... ok test_clone (tests.TestCase_YaesuFT857897US) Testing Yaesu FT-857/897 (US) clone ... ok test_copy_all (tests.TestCase_YaesuFT857897US) Testing Yaesu FT-857/897 (US) copy all ... ok test_detect (tests.TestCase_YaesuFT857897US) Testing Yaesu FT-857/897 (US) detect ... ok test_edges (tests.TestCase_YaesuFT857897US) Testing Yaesu FT-857/897 (US) edges ... ok test_settings (tests.TestCase_YaesuFT857897US) Testing Yaesu FT-857/897 (US) settings ... ok test_banks (tests.TestCase_YaesuFTM3200D) Testing Yaesu FTM-3200D banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFTM3200D) Testing Yaesu FTM-3200D brute force ... ok test_clone (tests.TestCase_YaesuFTM3200D) Testing Yaesu FTM-3200D clone ... ok test_copy_all (tests.TestCase_YaesuFTM3200D) Testing Yaesu FTM-3200D copy all ... ok test_detect (tests.TestCase_YaesuFTM3200D) Testing Yaesu FTM-3200D detect ... ok test_edges (tests.TestCase_YaesuFTM3200D) Testing Yaesu FTM-3200D edges ... ok test_settings (tests.TestCase_YaesuFTM3200D) Testing Yaesu FTM-3200D settings ... skipped 'Settings not supported' test_banks (tests.TestCase_YaesuFT60) Testing Yaesu FT-60 banks ... ok test_brute_force (tests.TestCase_YaesuFT60) Testing Yaesu FT-60 brute force ... ok test_clone (tests.TestCase_YaesuFT60) Testing Yaesu FT-60 clone ... ok test_copy_all (tests.TestCase_YaesuFT60) Testing Yaesu FT-60 copy all ... ok test_detect (tests.TestCase_YaesuFT60) Testing Yaesu FT-60 detect ... ok test_edges (tests.TestCase_YaesuFT60) Testing Yaesu FT-60 edges ... ok test_settings (tests.TestCase_YaesuFT60) Testing Yaesu FT-60 settings ... ok test_banks (tests.TestCase_IcomIC2100H) Testing Icom IC-2100H banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_IcomIC2100H) Testing Icom IC-2100H brute force ... ok test_clone (tests.TestCase_IcomIC2100H) Testing Icom IC-2100H clone ... ok test_copy_all (tests.TestCase_IcomIC2100H) Testing Icom IC-2100H copy all ... ok test_detect (tests.TestCase_IcomIC2100H) Testing Icom IC-2100H detect ... ok test_edges (tests.TestCase_IcomIC2100H) Testing Icom IC-2100H edges ... ok test_settings (tests.TestCase_IcomIC2100H) Testing Icom IC-2100H settings ... skipped 'Settings not supported' test_banks (tests.TestCase_YaesuFTM350) Testing Yaesu FTM-350 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFTM350) Testing Yaesu FTM-350 brute force ... ok test_clone (tests.TestCase_YaesuFTM350) Testing Yaesu FTM-350 clone ... ok test_copy_all (tests.TestCase_YaesuFTM350) Testing Yaesu FTM-350 copy all ... ok test_detect (tests.TestCase_YaesuFTM350) Testing Yaesu FTM-350 detect ... ok test_edges (tests.TestCase_YaesuFTM350) Testing Yaesu FTM-350 edges ... ok test_settings (tests.TestCase_YaesuFTM350) Testing Yaesu FTM-350 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_LeixenVV898) Testing Leixen VV-898 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_LeixenVV898) Testing Leixen VV-898 brute force ... ok test_clone (tests.TestCase_LeixenVV898) Testing Leixen VV-898 clone ... ok test_copy_all (tests.TestCase_LeixenVV898) Testing Leixen VV-898 copy all ... ok test_detect (tests.TestCase_LeixenVV898) Testing Leixen VV-898 detect ... ok test_edges (tests.TestCase_LeixenVV898) Testing Leixen VV-898 edges ... ok test_settings (tests.TestCase_LeixenVV898) Testing Leixen VV-898 settings ... ok test_banks (tests.TestCase_QYTKT7900D) Testing QYT KT7900D banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_QYTKT7900D) Testing QYT KT7900D brute force ... ok test_clone (tests.TestCase_QYTKT7900D) Testing QYT KT7900D clone ... ok test_copy_all (tests.TestCase_QYTKT7900D) Testing QYT KT7900D copy all ... ok test_detect (tests.TestCase_QYTKT7900D) Testing QYT KT7900D detect ... ok test_edges (tests.TestCase_QYTKT7900D) Testing QYT KT7900D edges ... ok test_settings (tests.TestCase_QYTKT7900D) Testing QYT KT7900D settings ... ok test_banks (tests.TestCase_WouxunKGUVD1P) Testing Wouxun KG-UVD1P banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_WouxunKGUVD1P) Testing Wouxun KG-UVD1P brute force ... ok test_clone (tests.TestCase_WouxunKGUVD1P) Testing Wouxun KG-UVD1P clone ... ok test_copy_all (tests.TestCase_WouxunKGUVD1P) Testing Wouxun KG-UVD1P copy all ... ok test_detect (tests.TestCase_WouxunKGUVD1P) Testing Wouxun KG-UVD1P detect ... ok test_edges (tests.TestCase_WouxunKGUVD1P) Testing Wouxun KG-UVD1P edges ... ok test_settings (tests.TestCase_WouxunKGUVD1P) Testing Wouxun KG-UVD1P settings ... ok test_banks (tests.TestCase_IcomICV82U82) Testing Icom IC-V82/U82 banks ... ok test_brute_force (tests.TestCase_IcomICV82U82) Testing Icom IC-V82/U82 brute force ... ok test_clone (tests.TestCase_IcomICV82U82) Testing Icom IC-V82/U82 clone ... ok test_copy_all (tests.TestCase_IcomICV82U82) Testing Icom IC-V82/U82 copy all ... ok test_detect (tests.TestCase_IcomICV82U82) Testing Icom IC-V82/U82 detect ... ok test_edges (tests.TestCase_IcomICV82U82) Testing Icom IC-V82/U82 edges ... ok test_settings (tests.TestCase_IcomICV82U82) Testing Icom IC-V82/U82 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_IcomICW32A) Testing Icom IC-W32A banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_IcomICW32A) Testing Icom IC-W32A brute force ... ok test_clone (tests.TestCase_IcomICW32A) Testing Icom IC-W32A clone ... ok test_copy_all (tests.TestCase_IcomICW32A) Testing Icom IC-W32A copy all ... ok test_detect (tests.TestCase_IcomICW32A) Testing Icom IC-W32A detect ... ok test_edges (tests.TestCase_IcomICW32A) Testing Icom IC-W32A edges ... ok test_settings (tests.TestCase_IcomICW32A) Testing Icom IC-W32A settings ... skipped 'Settings not supported' test_banks (tests.TestCase_YaesuVX3) Testing Yaesu VX-3 banks ... ok test_brute_force (tests.TestCase_YaesuVX3) Testing Yaesu VX-3 brute force ... ok test_clone (tests.TestCase_YaesuVX3) Testing Yaesu VX-3 clone ... ok test_copy_all (tests.TestCase_YaesuVX3) Testing Yaesu VX-3 copy all ... ok test_detect (tests.TestCase_YaesuVX3) Testing Yaesu VX-3 detect ... ok test_edges (tests.TestCase_YaesuVX3) Testing Yaesu VX-3 edges ... ok test_settings (tests.TestCase_YaesuVX3) Testing Yaesu VX-3 settings ... ok test_banks (tests.TestCase_FeidaxinFD268B) Testing Feidaxin FD-268B banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_FeidaxinFD268B) Testing Feidaxin FD-268B brute force ... ok test_clone (tests.TestCase_FeidaxinFD268B) Testing Feidaxin FD-268B clone ... ok test_copy_all (tests.TestCase_FeidaxinFD268B) Testing Feidaxin FD-268B copy all ... ok test_detect (tests.TestCase_FeidaxinFD268B) Testing Feidaxin FD-268B detect ... ok test_edges (tests.TestCase_FeidaxinFD268B) Testing Feidaxin FD-268B edges ... ok test_settings (tests.TestCase_FeidaxinFD268B) Testing Feidaxin FD-268B settings ... ok test_banks (tests.TestCase_BaofengUV5R) Testing Baofeng UV-5R banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BaofengUV5R) Testing Baofeng UV-5R brute force ... ok test_clone (tests.TestCase_BaofengUV5R) Testing Baofeng UV-5R clone ... ok test_copy_all (tests.TestCase_BaofengUV5R) Testing Baofeng UV-5R copy all ... ok test_detect (tests.TestCase_BaofengUV5R) Testing Baofeng UV-5R detect ... ok test_edges (tests.TestCase_BaofengUV5R) Testing Baofeng UV-5R edges ... ok test_settings (tests.TestCase_BaofengUV5R) Testing Baofeng UV-5R settings ... ok test_banks (tests.TestCase_BaofengUVB5) Testing Baofeng UV-B5 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BaofengUVB5) Testing Baofeng UV-B5 brute force ... ok test_clone (tests.TestCase_BaofengUVB5) Testing Baofeng UV-B5 clone ... ok test_copy_all (tests.TestCase_BaofengUVB5) Testing Baofeng UV-B5 copy all ... ok test_detect (tests.TestCase_BaofengUVB5) Testing Baofeng UV-B5 detect ... ok test_edges (tests.TestCase_BaofengUVB5) Testing Baofeng UV-B5 edges ... ok test_settings (tests.TestCase_BaofengUVB5) Testing Baofeng UV-B5 settings ... ok test_banks (tests.TestCase_BaofengBF888) Testing Baofeng BF-888 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BaofengBF888) Testing Baofeng BF-888 brute force ... ok test_clone (tests.TestCase_BaofengBF888) Testing Baofeng BF-888 clone ... ok test_copy_all (tests.TestCase_BaofengBF888) Testing Baofeng BF-888 copy all ... ok test_detect (tests.TestCase_BaofengBF888) Testing Baofeng BF-888 detect ... ok test_edges (tests.TestCase_BaofengBF888) Testing Baofeng BF-888 edges ... ok test_settings (tests.TestCase_BaofengBF888) Testing Baofeng BF-888 settings ... ok test_banks (tests.TestCase_LUITONLT725UV) Testing LUITON LT-725UV banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_LUITONLT725UV) Testing LUITON LT-725UV brute force ... ok test_clone (tests.TestCase_LUITONLT725UV) Testing LUITON LT-725UV clone ... ok test_copy_all (tests.TestCase_LUITONLT725UV) Testing LUITON LT-725UV copy all ... ok test_detect (tests.TestCase_LUITONLT725UV) Testing LUITON LT-725UV detect ... ok test_edges (tests.TestCase_LUITONLT725UV) Testing LUITON LT-725UV edges ... ok test_settings (tests.TestCase_LUITONLT725UV) Testing LUITON LT-725UV settings ... ok test_banks (tests.TestCase_YaesuFT817) Testing Yaesu FT-817 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT817) Testing Yaesu FT-817 brute force ... ok test_clone (tests.TestCase_YaesuFT817) Testing Yaesu FT-817 clone ... ok test_copy_all (tests.TestCase_YaesuFT817) Testing Yaesu FT-817 copy all ... ok test_detect (tests.TestCase_YaesuFT817) Testing Yaesu FT-817 detect ... ok test_edges (tests.TestCase_YaesuFT817) Testing Yaesu FT-817 edges ... ok test_settings (tests.TestCase_YaesuFT817) Testing Yaesu FT-817 settings ... ok test_banks (tests.TestCase_PolmarDB50M) Testing Polmar DB-50M banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_PolmarDB50M) Testing Polmar DB-50M brute force ... ok test_clone (tests.TestCase_PolmarDB50M) Testing Polmar DB-50M clone ... ok test_copy_all (tests.TestCase_PolmarDB50M) Testing Polmar DB-50M copy all ... ok test_detect (tests.TestCase_PolmarDB50M) Testing Polmar DB-50M detect ... ok test_edges (tests.TestCase_PolmarDB50M) Testing Polmar DB-50M edges ... ok test_settings (tests.TestCase_PolmarDB50M) Testing Polmar DB-50M settings ... ok test_banks (tests.TestCase_KYDNC630A) Testing KYD NC-630A banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_KYDNC630A) Testing KYD NC-630A brute force ... ok test_clone (tests.TestCase_KYDNC630A) Testing KYD NC-630A clone ... ok test_copy_all (tests.TestCase_KYDNC630A) Testing KYD NC-630A copy all ... ok test_detect (tests.TestCase_KYDNC630A) Testing KYD NC-630A detect ... ok test_edges (tests.TestCase_KYDNC630A) Testing KYD NC-630A edges ... ok test_settings (tests.TestCase_KYDNC630A) Testing KYD NC-630A settings ... ok test_banks (tests.TestCase_BTECHUV5X3) Testing BTECH UV-5X3 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHUV5X3) Testing BTECH UV-5X3 brute force ... ok test_clone (tests.TestCase_BTECHUV5X3) Testing BTECH UV-5X3 clone ... ok test_copy_all (tests.TestCase_BTECHUV5X3) Testing BTECH UV-5X3 copy all ... ok test_detect (tests.TestCase_BTECHUV5X3) Testing BTECH UV-5X3 detect ... ok test_edges (tests.TestCase_BTECHUV5X3) Testing BTECH UV-5X3 edges ... ok test_settings (tests.TestCase_BTECHUV5X3) Testing BTECH UV-5X3 settings ... ok test_banks (tests.TestCase_BTECHUV50X3) Testing BTECH UV-50X3 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHUV50X3) Testing BTECH UV-50X3 brute force ... ok test_clone (tests.TestCase_BTECHUV50X3) Testing BTECH UV-50X3 clone ... ok test_copy_all (tests.TestCase_BTECHUV50X3) Testing BTECH UV-50X3 copy all ... ok test_detect (tests.TestCase_BTECHUV50X3) Testing BTECH UV-50X3 detect ... ok test_edges (tests.TestCase_BTECHUV50X3) Testing BTECH UV-50X3 edges ... ok test_settings (tests.TestCase_BTECHUV50X3) Testing BTECH UV-50X3 settings ... ok test_banks (tests.TestCase_VertexStandardVXA700) Testing Vertex Standard VXA-700 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_VertexStandardVXA700) Testing Vertex Standard VXA-700 brute force ... ok test_clone (tests.TestCase_VertexStandardVXA700) Testing Vertex Standard VXA-700 clone ... ok test_copy_all (tests.TestCase_VertexStandardVXA700) Testing Vertex Standard VXA-700 copy all ... ok test_detect (tests.TestCase_VertexStandardVXA700) Testing Vertex Standard VXA-700 detect ... ok test_edges (tests.TestCase_VertexStandardVXA700) Testing Vertex Standard VXA-700 edges ... ok test_settings (tests.TestCase_VertexStandardVXA700) Testing Vertex Standard VXA-700 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_YaesuFT1802M) Testing Yaesu FT-1802M banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT1802M) Testing Yaesu FT-1802M brute force ... ok test_clone (tests.TestCase_YaesuFT1802M) Testing Yaesu FT-1802M clone ... ok test_copy_all (tests.TestCase_YaesuFT1802M) Testing Yaesu FT-1802M copy all ... ok test_detect (tests.TestCase_YaesuFT1802M) Testing Yaesu FT-1802M detect ... ok test_edges (tests.TestCase_YaesuFT1802M) Testing Yaesu FT-1802M edges ... ok test_settings (tests.TestCase_YaesuFT1802M) Testing Yaesu FT-1802M settings ... skipped 'Settings not supported' test_banks (tests.TestCase_IcomIC2720H) Testing Icom IC-2720H banks ... ok test_brute_force (tests.TestCase_IcomIC2720H) Testing Icom IC-2720H brute force ... ok test_clone (tests.TestCase_IcomIC2720H) Testing Icom IC-2720H clone ... ok test_copy_all (tests.TestCase_IcomIC2720H) Testing Icom IC-2720H copy all ... ok test_detect (tests.TestCase_IcomIC2720H) Testing Icom IC-2720H detect ... ok test_edges (tests.TestCase_IcomIC2720H) Testing Icom IC-2720H edges ... ok test_settings (tests.TestCase_IcomIC2720H) Testing Icom IC-2720H settings ... skipped 'Settings not supported' test_banks (tests.TestCase_YaesuFT818) Testing Yaesu FT-818 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT818) Testing Yaesu FT-818 brute force ... ok test_clone (tests.TestCase_YaesuFT818) Testing Yaesu FT-818 clone ... ok test_copy_all (tests.TestCase_YaesuFT818) Testing Yaesu FT-818 copy all ... ok test_detect (tests.TestCase_YaesuFT818) Testing Yaesu FT-818 detect ... ok test_edges (tests.TestCase_YaesuFT818) Testing Yaesu FT-818 edges ... ok test_settings (tests.TestCase_YaesuFT818) Testing Yaesu FT-818 settings ... ok test_banks (tests.TestCase_BTECHUV25X4) Testing BTECH UV-25X4 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHUV25X4) Testing BTECH UV-25X4 brute force ... ok test_clone (tests.TestCase_BTECHUV25X4) Testing BTECH UV-25X4 clone ... ok test_copy_all (tests.TestCase_BTECHUV25X4) Testing BTECH UV-25X4 copy all ... ok test_detect (tests.TestCase_BTECHUV25X4) Testing BTECH UV-25X4 detect ... ok test_edges (tests.TestCase_BTECHUV25X4) Testing BTECH UV-25X4 edges ... ok test_settings (tests.TestCase_BTECHUV25X4) Testing BTECH UV-25X4 settings ... ok test_banks (tests.TestCase_IcomID51) Testing Icom ID-51 banks ... ok test_brute_force (tests.TestCase_IcomID51) Testing Icom ID-51 brute force ... ok test_clone (tests.TestCase_IcomID51) Testing Icom ID-51 clone ... ok test_copy_all (tests.TestCase_IcomID51) Testing Icom ID-51 copy all ... ok test_detect (tests.TestCase_IcomID51) Testing Icom ID-51 detect ... ok test_edges (tests.TestCase_IcomID51) Testing Icom ID-51 edges ... ok test_settings (tests.TestCase_IcomID51) Testing Icom ID-51 settings ... ok test_banks (tests.TestCase_KenwoodTHD72clonemode) Testing Kenwood TH-D72 (clone mode) banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_KenwoodTHD72clonemode) Testing Kenwood TH-D72 (clone mode) brute force ... ok test_clone (tests.TestCase_KenwoodTHD72clonemode) Testing Kenwood TH-D72 (clone mode) clone ... ok test_copy_all (tests.TestCase_KenwoodTHD72clonemode) Testing Kenwood TH-D72 (clone mode) copy all ... ok test_detect (tests.TestCase_KenwoodTHD72clonemode) Testing Kenwood TH-D72 (clone mode) detect ... ok test_edges (tests.TestCase_KenwoodTHD72clonemode) Testing Kenwood TH-D72 (clone mode) edges ... ok test_settings (tests.TestCase_KenwoodTHD72clonemode) Testing Kenwood TH-D72 (clone mode) settings ... ok test_banks (tests.TestCase_YaesuVX8DR) Testing Yaesu VX-8DR banks ... ok test_brute_force (tests.TestCase_YaesuVX8DR) Testing Yaesu VX-8DR brute force ... ok test_clone (tests.TestCase_YaesuVX8DR) Testing Yaesu VX-8DR clone ... ok test_copy_all (tests.TestCase_YaesuVX8DR) Testing Yaesu VX-8DR copy all ... ok test_detect (tests.TestCase_YaesuVX8DR) Testing Yaesu VX-8DR detect ... ok test_edges (tests.TestCase_YaesuVX8DR) Testing Yaesu VX-8DR edges ... ok test_settings (tests.TestCase_YaesuVX8DR) Testing Yaesu VX-8DR settings ... ok test_banks (tests.TestCase_RadtelT18) Testing Radtel T18 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RadtelT18) Testing Radtel T18 brute force ... ok test_clone (tests.TestCase_RadtelT18) Testing Radtel T18 clone ... ok test_copy_all (tests.TestCase_RadtelT18) Testing Radtel T18 copy all ... ok test_detect (tests.TestCase_RadtelT18) Testing Radtel T18 detect ... ok test_edges (tests.TestCase_RadtelT18) Testing Radtel T18 edges ... ok test_settings (tests.TestCase_RadtelT18) Testing Radtel T18 settings ... ok test_banks (tests.TestCase_BaofengF11) Testing Baofeng F-11 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BaofengF11) Testing Baofeng F-11 brute force ... ok test_clone (tests.TestCase_BaofengF11) Testing Baofeng F-11 clone ... ok test_copy_all (tests.TestCase_BaofengF11) Testing Baofeng F-11 copy all ... ok test_detect (tests.TestCase_BaofengF11) Testing Baofeng F-11 detect ... ok test_edges (tests.TestCase_BaofengF11) Testing Baofeng F-11 edges ... ok test_settings (tests.TestCase_BaofengF11) Testing Baofeng F-11 settings ... ok test_banks (tests.TestCase_FeidaxinFD268A) Testing Feidaxin FD-268A banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_FeidaxinFD268A) Testing Feidaxin FD-268A brute force ... ok test_clone (tests.TestCase_FeidaxinFD268A) Testing Feidaxin FD-268A clone ... ok test_copy_all (tests.TestCase_FeidaxinFD268A) Testing Feidaxin FD-268A copy all ... ok test_detect (tests.TestCase_FeidaxinFD268A) Testing Feidaxin FD-268A detect ... ok test_edges (tests.TestCase_FeidaxinFD268A) Testing Feidaxin FD-268A edges ... ok test_settings (tests.TestCase_FeidaxinFD268A) Testing Feidaxin FD-268A settings ... ok test_banks (tests.TestCase_AlincoDJ175) Testing Alinco DJ175 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_AlincoDJ175) Testing Alinco DJ175 brute force ... ok test_clone (tests.TestCase_AlincoDJ175) Testing Alinco DJ175 clone ... ok test_copy_all (tests.TestCase_AlincoDJ175) Testing Alinco DJ175 copy all ... ok test_detect (tests.TestCase_AlincoDJ175) Testing Alinco DJ175 detect ... ok test_edges (tests.TestCase_AlincoDJ175) Testing Alinco DJ175 edges ... ok test_settings (tests.TestCase_AlincoDJ175) Testing Alinco DJ175 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_BTECHGMRSV1) Testing BTECH GMRS-V1 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHGMRSV1) Testing BTECH GMRS-V1 brute force ... ok test_clone (tests.TestCase_BTECHGMRSV1) Testing BTECH GMRS-V1 clone ... ok test_copy_all (tests.TestCase_BTECHGMRSV1) Testing BTECH GMRS-V1 copy all ... ok test_detect (tests.TestCase_BTECHGMRSV1) Testing BTECH GMRS-V1 detect ... ok test_edges (tests.TestCase_BTECHGMRSV1) Testing BTECH GMRS-V1 edges ... ok test_settings (tests.TestCase_BTECHGMRSV1) Testing BTECH GMRS-V1 settings ... ok test_banks (tests.TestCase_RetevisRT22) Testing Retevis RT22 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RetevisRT22) Testing Retevis RT22 brute force ... ok test_clone (tests.TestCase_RetevisRT22) Testing Retevis RT22 clone ... ok test_copy_all (tests.TestCase_RetevisRT22) Testing Retevis RT22 copy all ... ok test_detect (tests.TestCase_RetevisRT22) Testing Retevis RT22 detect ... ok test_edges (tests.TestCase_RetevisRT22) Testing Retevis RT22 edges ... ok test_settings (tests.TestCase_RetevisRT22) Testing Retevis RT22 settings ... ok test_banks (tests.TestCase_YaesuVX8R) Testing Yaesu VX-8R banks ... ok test_brute_force (tests.TestCase_YaesuVX8R) Testing Yaesu VX-8R brute force ... ok test_clone (tests.TestCase_YaesuVX8R) Testing Yaesu VX-8R clone ... ok test_copy_all (tests.TestCase_YaesuVX8R) Testing Yaesu VX-8R copy all ... ok test_detect (tests.TestCase_YaesuVX8R) Testing Yaesu VX-8R detect ... ok test_edges (tests.TestCase_YaesuVX8R) Testing Yaesu VX-8R edges ... ok test_settings (tests.TestCase_YaesuVX8R) Testing Yaesu VX-8R settings ... ok test_banks (tests.TestCase_AlincoDJG7EG) Testing Alinco DJ-G7EG banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_AlincoDJG7EG) Testing Alinco DJ-G7EG brute force ... ok test_clone (tests.TestCase_AlincoDJG7EG) Testing Alinco DJ-G7EG clone ... ok test_copy_all (tests.TestCase_AlincoDJG7EG) Testing Alinco DJ-G7EG copy all ... ok test_detect (tests.TestCase_AlincoDJG7EG) Testing Alinco DJ-G7EG detect ... ok test_edges (tests.TestCase_AlincoDJG7EG) Testing Alinco DJ-G7EG edges ... ok test_settings (tests.TestCase_AlincoDJG7EG) Testing Alinco DJ-G7EG settings ... skipped 'Settings not supported' test_banks (tests.TestCase_LeixenVV898S) Testing Leixen VV-898S banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_LeixenVV898S) Testing Leixen VV-898S brute force ... ok test_clone (tests.TestCase_LeixenVV898S) Testing Leixen VV-898S clone ... ok test_copy_all (tests.TestCase_LeixenVV898S) Testing Leixen VV-898S copy all ... ok test_detect (tests.TestCase_LeixenVV898S) Testing Leixen VV-898S detect ... ok test_edges (tests.TestCase_LeixenVV898S) Testing Leixen VV-898S edges ... ok test_settings (tests.TestCase_LeixenVV898S) Testing Leixen VV-898S settings ... ok test_banks (tests.TestCase_KYDIP620) Testing KYD IP-620 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_KYDIP620) Testing KYD IP-620 brute force ... ok test_clone (tests.TestCase_KYDIP620) Testing KYD IP-620 clone ... ok test_copy_all (tests.TestCase_KYDIP620) Testing KYD IP-620 copy all ... ok test_detect (tests.TestCase_KYDIP620) Testing KYD IP-620 detect ... ok test_edges (tests.TestCase_KYDIP620) Testing KYD IP-620 edges ... ok test_settings (tests.TestCase_KYDIP620) Testing KYD IP-620 settings ... ok test_banks (tests.TestCase_YaesuFT78007900) Testing Yaesu FT-7800/7900 banks ... ok test_brute_force (tests.TestCase_YaesuFT78007900) Testing Yaesu FT-7800/7900 brute force ... ok test_clone (tests.TestCase_YaesuFT78007900) Testing Yaesu FT-7800/7900 clone ... ok test_copy_all (tests.TestCase_YaesuFT78007900) Testing Yaesu FT-7800/7900 copy all ... ok test_detect (tests.TestCase_YaesuFT78007900) Testing Yaesu FT-7800/7900 detect ... ok test_edges (tests.TestCase_YaesuFT78007900) Testing Yaesu FT-7800/7900 edges ... ok test_settings (tests.TestCase_YaesuFT78007900) Testing Yaesu FT-7800/7900 settings ... ok test_banks (tests.TestCase_YaesuVX2) Testing Yaesu VX-2 banks ... ok test_brute_force (tests.TestCase_YaesuVX2) Testing Yaesu VX-2 brute force ... ok test_clone (tests.TestCase_YaesuVX2) Testing Yaesu VX-2 clone ... ok test_copy_all (tests.TestCase_YaesuVX2) Testing Yaesu VX-2 copy all ... ok test_detect (tests.TestCase_YaesuVX2) Testing Yaesu VX-2 detect ... ok test_edges (tests.TestCase_YaesuVX2) Testing Yaesu VX-2 edges ... ok test_settings (tests.TestCase_YaesuVX2) Testing Yaesu VX-2 settings ... ok test_banks (tests.TestCase_WouxunKGUV8DPlus) Testing Wouxun KG-UV8D Plus banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_WouxunKGUV8DPlus) Testing Wouxun KG-UV8D Plus brute force ... ok test_clone (tests.TestCase_WouxunKGUV8DPlus) Testing Wouxun KG-UV8D Plus clone ... ok test_copy_all (tests.TestCase_WouxunKGUV8DPlus) Testing Wouxun KG-UV8D Plus copy all ... ok test_detect (tests.TestCase_WouxunKGUV8DPlus) Testing Wouxun KG-UV8D Plus detect ... ok test_edges (tests.TestCase_WouxunKGUV8DPlus) Testing Wouxun KG-UV8D Plus edges ... ok test_settings (tests.TestCase_WouxunKGUV8DPlus) Testing Wouxun KG-UV8D Plus settings ... ok test_banks (tests.TestCase_WouxunKGUV8D) Testing Wouxun KG-UV8D banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_WouxunKGUV8D) Testing Wouxun KG-UV8D brute force ... ok test_clone (tests.TestCase_WouxunKGUV8D) Testing Wouxun KG-UV8D clone ... ok test_copy_all (tests.TestCase_WouxunKGUV8D) Testing Wouxun KG-UV8D copy all ... ok test_detect (tests.TestCase_WouxunKGUV8D) Testing Wouxun KG-UV8D detect ... ok test_edges (tests.TestCase_WouxunKGUV8D) Testing Wouxun KG-UV8D edges ... ok test_settings (tests.TestCase_WouxunKGUV8D) Testing Wouxun KG-UV8D settings ... ok test_banks (tests.TestCase_KenwoodTK272G) Testing Kenwood TK-272G banks ... ok test_brute_force (tests.TestCase_KenwoodTK272G) Testing Kenwood TK-272G brute force ... ok test_clone (tests.TestCase_KenwoodTK272G) Testing Kenwood TK-272G clone ... ok test_copy_all (tests.TestCase_KenwoodTK272G) Testing Kenwood TK-272G copy all ... ok test_detect (tests.TestCase_KenwoodTK272G) Testing Kenwood TK-272G detect ... ok test_edges (tests.TestCase_KenwoodTK272G) Testing Kenwood TK-272G edges ... ok test_settings (tests.TestCase_KenwoodTK272G) Testing Kenwood TK-272G settings ... ok test_banks (tests.TestCase_QYTKT8900D) Testing QYT KT8900D banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_QYTKT8900D) Testing QYT KT8900D brute force ... ok test_clone (tests.TestCase_QYTKT8900D) Testing QYT KT8900D clone ... ok test_copy_all (tests.TestCase_QYTKT8900D) Testing QYT KT8900D copy all ... ok test_detect (tests.TestCase_QYTKT8900D) Testing QYT KT8900D detect ... ok test_edges (tests.TestCase_QYTKT8900D) Testing QYT KT8900D edges ... ok test_settings (tests.TestCase_QYTKT8900D) Testing QYT KT8900D settings ... ok test_banks (tests.TestCase_KenwoodTK760G) Testing Kenwood TK-760G banks ... ok test_brute_force (tests.TestCase_KenwoodTK760G) Testing Kenwood TK-760G brute force ... ok test_clone (tests.TestCase_KenwoodTK760G) Testing Kenwood TK-760G clone ... ok test_copy_all (tests.TestCase_KenwoodTK760G) Testing Kenwood TK-760G copy all ... ok test_detect (tests.TestCase_KenwoodTK760G) Testing Kenwood TK-760G detect ... ok test_edges (tests.TestCase_KenwoodTK760G) Testing Kenwood TK-760G edges ... ok test_settings (tests.TestCase_KenwoodTK760G) Testing Kenwood TK-760G settings ... ok test_banks (tests.TestCase_YaesuVX6) Testing Yaesu VX-6 banks ... ok test_brute_force (tests.TestCase_YaesuVX6) Testing Yaesu VX-6 brute force ... ok test_clone (tests.TestCase_YaesuVX6) Testing Yaesu VX-6 clone ... ok test_copy_all (tests.TestCase_YaesuVX6) Testing Yaesu VX-6 copy all ... ok test_detect (tests.TestCase_YaesuVX6) Testing Yaesu VX-6 detect ... ok test_edges (tests.TestCase_YaesuVX6) Testing Yaesu VX-6 edges ... ok test_settings (tests.TestCase_YaesuVX6) Testing Yaesu VX-6 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_IcomIC208H) Testing Icom IC-208H banks ... ok test_brute_force (tests.TestCase_IcomIC208H) Testing Icom IC-208H brute force ... ok test_clone (tests.TestCase_IcomIC208H) Testing Icom IC-208H clone ... ok test_copy_all (tests.TestCase_IcomIC208H) Testing Icom IC-208H copy all ... ok test_detect (tests.TestCase_IcomIC208H) Testing Icom IC-208H detect ... ok test_edges (tests.TestCase_IcomIC208H) Testing Icom IC-208H edges ... ok test_settings (tests.TestCase_IcomIC208H) Testing Icom IC-208H settings ... skipped 'Settings not supported' test_banks (tests.TestCase_IcomID31A) Testing Icom ID-31A banks ... ok test_brute_force (tests.TestCase_IcomID31A) Testing Icom ID-31A brute force ... ok test_clone (tests.TestCase_IcomID31A) Testing Icom ID-31A clone ... ok test_copy_all (tests.TestCase_IcomID31A) Testing Icom ID-31A copy all ... ok test_detect (tests.TestCase_IcomID31A) Testing Icom ID-31A detect ... ok test_edges (tests.TestCase_IcomID31A) Testing Icom ID-31A edges ... ok test_settings (tests.TestCase_IcomID31A) Testing Icom ID-31A settings ... ok test_banks (tests.TestCase_TYTTH7800) Testing TYT TH-7800 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TYTTH7800) Testing TYT TH-7800 brute force ... ok test_clone (tests.TestCase_TYTTH7800) Testing TYT TH-7800 clone ... ok test_copy_all (tests.TestCase_TYTTH7800) Testing TYT TH-7800 copy all ... ok test_detect (tests.TestCase_TYTTH7800) Testing TYT TH-7800 detect ... ok test_edges (tests.TestCase_TYTTH7800) Testing TYT TH-7800 edges ... ok test_settings (tests.TestCase_TYTTH7800) Testing TYT TH-7800 settings ... ok test_banks (tests.TestCase_IcomIC2200H) Testing Icom IC-2200H banks ... ok test_brute_force (tests.TestCase_IcomIC2200H) Testing Icom IC-2200H brute force ... ok test_clone (tests.TestCase_IcomIC2200H) Testing Icom IC-2200H clone ... ok test_copy_all (tests.TestCase_IcomIC2200H) Testing Icom IC-2200H copy all ... ok test_detect (tests.TestCase_IcomIC2200H) Testing Icom IC-2200H detect ... ok test_edges (tests.TestCase_IcomIC2200H) Testing Icom IC-2200H edges ... ok test_settings (tests.TestCase_IcomIC2200H) Testing Icom IC-2200H settings ... ok test_banks (tests.TestCase_PuxingPX888K) Testing Puxing PX-888K banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_PuxingPX888K) Testing Puxing PX-888K brute force ... ok test_clone (tests.TestCase_PuxingPX888K) Testing Puxing PX-888K clone ... ok test_copy_all (tests.TestCase_PuxingPX888K) Testing Puxing PX-888K copy all ... ok test_detect (tests.TestCase_PuxingPX888K) Testing Puxing PX-888K detect ... ok test_edges (tests.TestCase_PuxingPX888K) Testing Puxing PX-888K edges ... ok test_settings (tests.TestCase_PuxingPX888K) Testing Puxing PX-888K settings ... ok test_banks (tests.TestCase_YaesuFT857897) Testing Yaesu FT-857/897 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT857897) Testing Yaesu FT-857/897 brute force ... ok test_clone (tests.TestCase_YaesuFT857897) Testing Yaesu FT-857/897 clone ... ok test_copy_all (tests.TestCase_YaesuFT857897) Testing Yaesu FT-857/897 copy all ... ok test_detect (tests.TestCase_YaesuFT857897) Testing Yaesu FT-857/897 detect ... ok test_edges (tests.TestCase_YaesuFT857897) Testing Yaesu FT-857/897 edges ... ok test_settings (tests.TestCase_YaesuFT857897) Testing Yaesu FT-857/897 settings ... ok test_banks (tests.TestCase_IcomIC2730A) Testing Icom IC-2730A banks ... ok test_brute_force (tests.TestCase_IcomIC2730A) Testing Icom IC-2730A brute force ... ok test_clone (tests.TestCase_IcomIC2730A) Testing Icom IC-2730A clone ... ok test_copy_all (tests.TestCase_IcomIC2730A) Testing Icom IC-2730A copy all ... ok test_detect (tests.TestCase_IcomIC2730A) Testing Icom IC-2730A detect ... ok test_edges (tests.TestCase_IcomIC2730A) Testing Icom IC-2730A edges ... ok test_settings (tests.TestCase_IcomIC2730A) Testing Icom IC-2730A settings ... ok test_banks (tests.TestCase_AnyToneOBLTR8R) Testing AnyTone OBLTR-8R banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_AnyToneOBLTR8R) Testing AnyTone OBLTR-8R brute force ... ok test_clone (tests.TestCase_AnyToneOBLTR8R) Testing AnyTone OBLTR-8R clone ... ok test_copy_all (tests.TestCase_AnyToneOBLTR8R) Testing AnyTone OBLTR-8R copy all ... ok test_detect (tests.TestCase_AnyToneOBLTR8R) Testing AnyTone OBLTR-8R detect ... ok test_edges (tests.TestCase_AnyToneOBLTR8R) Testing AnyTone OBLTR-8R edges ... ok test_settings (tests.TestCase_AnyToneOBLTR8R) Testing AnyTone OBLTR-8R settings ... ok test_banks (tests.TestCase_WouxunKG816) Testing Wouxun KG-816 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_WouxunKG816) Testing Wouxun KG-816 brute force ... ok test_clone (tests.TestCase_WouxunKG816) Testing Wouxun KG-816 clone ... ok test_copy_all (tests.TestCase_WouxunKG816) Testing Wouxun KG-816 copy all ... ok test_detect (tests.TestCase_WouxunKG816) Testing Wouxun KG-816 detect ... ok test_edges (tests.TestCase_WouxunKG816) Testing Wouxun KG-816 edges ... ok test_settings (tests.TestCase_WouxunKG816) Testing Wouxun KG-816 settings ... ok test_banks (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 banks ... ok test_brute_force (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 brute force ... ok test_clone (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 clone ... ok test_copy_all (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 copy all ... ok test_detect (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 detect ... ok test_edges (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 edges ... ok test_settings (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_IcomICQ7A) Testing Icom IC-Q7A banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_IcomICQ7A) Testing Icom IC-Q7A brute force ... ok test_clone (tests.TestCase_IcomICQ7A) Testing Icom IC-Q7A clone ... ok test_copy_all (tests.TestCase_IcomICQ7A) Testing Icom IC-Q7A copy all ... ok test_detect (tests.TestCase_IcomICQ7A) Testing Icom IC-Q7A detect ... ok test_edges (tests.TestCase_IcomICQ7A) Testing Icom IC-Q7A edges ... ok test_settings (tests.TestCase_IcomICQ7A) Testing Icom IC-Q7A settings ... ok test_banks (tests.TestCase_YaesuVX8GE) Testing Yaesu VX-8GE banks ... ok test_brute_force (tests.TestCase_YaesuVX8GE) Testing Yaesu VX-8GE brute force ... ok test_clone (tests.TestCase_YaesuVX8GE) Testing Yaesu VX-8GE clone ... ok test_copy_all (tests.TestCase_YaesuVX8GE) Testing Yaesu VX-8GE copy all ... ok test_detect (tests.TestCase_YaesuVX8GE) Testing Yaesu VX-8GE detect ... ok test_edges (tests.TestCase_YaesuVX8GE) Testing Yaesu VX-8GE edges ... ok test_settings (tests.TestCase_YaesuVX8GE) Testing Yaesu VX-8GE settings ... ok test_banks (tests.TestCase_IcomICT70) Testing Icom IC-T70 banks ... ok test_brute_force (tests.TestCase_IcomICT70) Testing Icom IC-T70 brute force ... ok test_clone (tests.TestCase_IcomICT70) Testing Icom IC-T70 clone ... ok test_copy_all (tests.TestCase_IcomICT70) Testing Icom IC-T70 copy all ... ok test_detect (tests.TestCase_IcomICT70) Testing Icom IC-T70 detect ... ok test_edges (tests.TestCase_IcomICT70) Testing Icom IC-T70 edges ... ok test_settings (tests.TestCase_IcomICT70) Testing Icom IC-T70 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_TYTTHUV3R) Testing TYT TH-UV3R banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TYTTHUV3R) Testing TYT TH-UV3R brute force ... ok test_clone (tests.TestCase_TYTTHUV3R) Testing TYT TH-UV3R clone ... ok test_copy_all (tests.TestCase_TYTTHUV3R) Testing TYT TH-UV3R copy all ... ok test_detect (tests.TestCase_TYTTHUV3R) Testing TYT TH-UV3R detect ... ok test_edges (tests.TestCase_TYTTHUV3R) Testing TYT TH-UV3R edges ... ok test_settings (tests.TestCase_TYTTHUV3R) Testing TYT TH-UV3R settings ... skipped 'Settings not supported' test_banks (tests.TestCase_YaesuFT1D) Testing Yaesu FT-1D banks ... ok test_brute_force (tests.TestCase_YaesuFT1D) Testing Yaesu FT-1D brute force ... ok test_clone (tests.TestCase_YaesuFT1D) Testing Yaesu FT-1D clone ... ok test_copy_all (tests.TestCase_YaesuFT1D) Testing Yaesu FT-1D copy all ... ok test_detect (tests.TestCase_YaesuFT1D) Testing Yaesu FT-1D detect ... ok test_edges (tests.TestCase_YaesuFT1D) Testing Yaesu FT-1D edges ... ok test_settings (tests.TestCase_YaesuFT1D) Testing Yaesu FT-1D settings ... ok test_banks (tests.TestCase_RetevisRT23) Testing Retevis RT23 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RetevisRT23) Testing Retevis RT23 brute force ... ok test_clone (tests.TestCase_RetevisRT23) Testing Retevis RT23 clone ... ok test_copy_all (tests.TestCase_RetevisRT23) Testing Retevis RT23 copy all ... ok test_detect (tests.TestCase_RetevisRT23) Testing Retevis RT23 detect ... ok test_edges (tests.TestCase_RetevisRT23) Testing Retevis RT23 edges ... ok test_settings (tests.TestCase_RetevisRT23) Testing Retevis RT23 settings ... ok test_banks (tests.TestCase_PuxingPX777) Testing Puxing PX-777 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_PuxingPX777) Testing Puxing PX-777 brute force ... ok test_clone (tests.TestCase_PuxingPX777) Testing Puxing PX-777 clone ... ok test_copy_all (tests.TestCase_PuxingPX777) Testing Puxing PX-777 copy all ... ok test_detect (tests.TestCase_PuxingPX777) Testing Puxing PX-777 detect ... ok test_edges (tests.TestCase_PuxingPX777) Testing Puxing PX-777 edges ... ok test_settings (tests.TestCase_PuxingPX777) Testing Puxing PX-777 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_IcomID800H) Testing Icom ID-800H banks ... ok test_brute_force (tests.TestCase_IcomID800H) Testing Icom ID-800H brute force ... ok test_clone (tests.TestCase_IcomID800H) Testing Icom ID-800H clone ... ok test_copy_all (tests.TestCase_IcomID800H) Testing Icom ID-800H copy all ... ok test_detect (tests.TestCase_IcomID800H) Testing Icom ID-800H detect ... ok test_edges (tests.TestCase_IcomID800H) Testing Icom ID-800H edges ... ok test_settings (tests.TestCase_IcomID800H) Testing Icom ID-800H settings ... ok test_banks (tests.TestCase_AlincoDR235T) Testing Alinco DR235T banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_AlincoDR235T) Testing Alinco DR235T brute force ... ok test_clone (tests.TestCase_AlincoDR235T) Testing Alinco DR235T clone ... ok test_copy_all (tests.TestCase_AlincoDR235T) Testing Alinco DR235T copy all ... ok test_detect (tests.TestCase_AlincoDR235T) Testing Alinco DR235T detect ... ok test_edges (tests.TestCase_AlincoDR235T) Testing Alinco DR235T edges ... ok test_settings (tests.TestCase_AlincoDR235T) Testing Alinco DR235T settings ... skipped 'Settings not supported' test_banks (tests.TestCase_YaesuFT450D) Testing Yaesu FT-450D banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT450D) Testing Yaesu FT-450D brute force ... ok test_clone (tests.TestCase_YaesuFT450D) Testing Yaesu FT-450D clone ... ok test_copy_all (tests.TestCase_YaesuFT450D) Testing Yaesu FT-450D copy all ... ok test_detect (tests.TestCase_YaesuFT450D) Testing Yaesu FT-450D detect ... ok test_edges (tests.TestCase_YaesuFT450D) Testing Yaesu FT-450D edges ... ok test_settings (tests.TestCase_YaesuFT450D) Testing Yaesu FT-450D settings ... ok test_banks (tests.TestCase_YaesuVX5) Testing Yaesu VX-5 banks ... ok test_brute_force (tests.TestCase_YaesuVX5) Testing Yaesu VX-5 brute force ... ok test_clone (tests.TestCase_YaesuVX5) Testing Yaesu VX-5 clone ... ok test_copy_all (tests.TestCase_YaesuVX5) Testing Yaesu VX-5 copy all ... ok test_detect (tests.TestCase_YaesuVX5) Testing Yaesu VX-5 detect ... ok test_edges (tests.TestCase_YaesuVX5) Testing Yaesu VX-5 edges ... ok test_settings (tests.TestCase_YaesuVX5) Testing Yaesu VX-5 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_FeidaxinFD288B) Testing Feidaxin FD-288B banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_FeidaxinFD288B) Testing Feidaxin FD-288B brute force ... ok test_clone (tests.TestCase_FeidaxinFD288B) Testing Feidaxin FD-288B clone ... ok test_copy_all (tests.TestCase_FeidaxinFD288B) Testing Feidaxin FD-288B copy all ... ok test_detect (tests.TestCase_FeidaxinFD288B) Testing Feidaxin FD-288B detect ... ok test_edges (tests.TestCase_FeidaxinFD288B) Testing Feidaxin FD-288B edges ... ok test_settings (tests.TestCase_FeidaxinFD288B) Testing Feidaxin FD-288B settings ... ok test_banks (tests.TestCase_YaesuFT2900R1900R) Testing Yaesu FT-2900R/1900R banks ... ok test_brute_force (tests.TestCase_YaesuFT2900R1900R) Testing Yaesu FT-2900R/1900R brute force ... ok test_clone (tests.TestCase_YaesuFT2900R1900R) Testing Yaesu FT-2900R/1900R clone ... ok test_copy_all (tests.TestCase_YaesuFT2900R1900R) Testing Yaesu FT-2900R/1900R copy all ... ok test_detect (tests.TestCase_YaesuFT2900R1900R) Testing Yaesu FT-2900R/1900R detect ... ok test_edges (tests.TestCase_YaesuFT2900R1900R) Testing Yaesu FT-2900R/1900R edges ... ok test_settings (tests.TestCase_YaesuFT2900R1900R) Testing Yaesu FT-2900R/1900R settings ... ok test_banks (tests.TestCase_RetevisRT21) Testing Retevis RT21 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RetevisRT21) Testing Retevis RT21 brute force ... ok test_clone (tests.TestCase_RetevisRT21) Testing Retevis RT21 clone ... ok test_copy_all (tests.TestCase_RetevisRT21) Testing Retevis RT21 copy all ... ok test_detect (tests.TestCase_RetevisRT21) Testing Retevis RT21 detect ... ok test_edges (tests.TestCase_RetevisRT21) Testing Retevis RT21 edges ... ok test_settings (tests.TestCase_RetevisRT21) Testing Retevis RT21 settings ... ok test_banks (tests.TestCase_YaesuFT817NDUS) Testing Yaesu FT-817ND (US) banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT817NDUS) Testing Yaesu FT-817ND (US) brute force ... ok test_clone (tests.TestCase_YaesuFT817NDUS) Testing Yaesu FT-817ND (US) clone ... ok test_copy_all (tests.TestCase_YaesuFT817NDUS) Testing Yaesu FT-817ND (US) copy all ... ok test_detect (tests.TestCase_YaesuFT817NDUS) Testing Yaesu FT-817ND (US) detect ... ok test_edges (tests.TestCase_YaesuFT817NDUS) Testing Yaesu FT-817ND (US) edges ... ok test_settings (tests.TestCase_YaesuFT817NDUS) Testing Yaesu FT-817ND (US) settings ... ok ---------------------------------------------------------------------- Ran 798 tests in 208.970s OK (skipped=113) style create: /chirp.hg/.tox/style style installdeps: pep8==1.6.2 style inst: /chirp.hg/.tox/dist/chirp-0.3.0dev.zip style installed: chirp==0.3.0.dev0,mercurial==3.7.3,pep8==1.6.2,pluggy==0.6.0,py==1.5.3,pyserial==3.0.1,six==1.11.0,tox==2.9.1,virtualenv==15.2.0 style runtests: PYTHONHASHSEED='1751100956' style runtests: commands[0] | python ./tools/cpep8.py ___________________________________ summary ____________________________________ unit: commands succeeded driver: commands succeeded style: commands succeeded congratulations :) Email was triggered for: Success Sending email for trigger: Success

1 0