- Developers - lists.chirpmyradio.com

[chirp_devel] [PATCH] [UV-B5] Revert TX inhibit feature, because the trick only works on b-band. #837
by Tom Hayward 29 Mar '17

29 Mar '17

# HG changeset patch # User Tom Hayward <tom(a)tomh.us> # Date 1490824544 25200 # Wed Mar 29 14:55:44 2017 -0700 # Node ID 5a9a8e58950c3ab65ecb8ac94bfdac15816c3104 # Parent 647ca47384a3571596b28f95914a47d2019875e2 [UV-B5] Revert TX inhibit feature, because the trick only works on b-band. #837 On a-band, this TX inhibit trick casues the radio to transmit spurious emissions on multiple frequencies. diff -r 647ca47384a3 -r 5a9a8e58950c chirp/drivers/uvb5.py --- a/chirp/drivers/uvb5.py Wed Mar 29 14:51:30 2017 -0700 +++ b/chirp/drivers/uvb5.py Wed Mar 29 14:55:44 2017 -0700 @@ -250,7 +250,7 @@ LOG.debug("Radio ACK'd block at address 0x%04x" % i) do_status(radio, "to", i) -DUPLEX = ["", "-", "+", 'off', "split"] +DUPLEX = ["", "-", "+"] UVB5_STEPS = [5.00, 6.25, 10.0, 12.5, 20.0, 25.0] CHARSET = "0123456789- ABCDEFGHIJKLMNOPQRSTUVWXYZ/_+*" SPECIALS = { @@ -305,7 +305,7 @@ rf.valid_tmodes = ["", "Tone", "TSQL", "DTCS", "Cross"] rf.valid_cross_modes = ["Tone->Tone", "Tone->DTCS", "DTCS->Tone", "->Tone", "->DTCS", "DTCS->", "DTCS->DTCS"] - rf.valid_duplexes = DUPLEX + rf.valid_duplexes = DUPLEX + ["split"] rf.can_odd_split = True rf.valid_skips = ["", "S"] rf.valid_characters = CHARSET @@ -413,10 +413,6 @@ mem.skip = "" if _mem.scanadd else "S" mem.power = POWER_LEVELS[_mem.highpower] - if mem.freq == mem.offset and mem.duplex == "-": - mem.duplex = "off" - mem.offset = 0 - if _nam: for char in _nam: try: @@ -459,10 +455,7 @@ _mem.freq = mem.freq / 10 - if mem.duplex == "off": - _mem.duplex = DUPLEX.index("-") - _mem.offset = _mem.freq - elif mem.duplex == "split": + if mem.duplex == "split": diff = mem.offset - mem.freq _mem.duplex = DUPLEX.index("-") if diff < 0 else DUPLEX.index("+") _mem.offset = abs(diff) / 10

1 0

[chirp_devel] Edge test doesn't match input validation
by Tom Hayward 29 Mar '17

29 Mar '17

Recent changes to the TH-D72 driver cause the Edges test to fail. I looked into it and found an inconsistency between the edge test and all the other valid_bands logic in Chirp. The issue is described in this bug report: http://chirp.danplanet.com/issues/4689 I tried fixing the test by subtracting the minimum step size from the upper bound, since Chirp's input logic requires a frequency to be less than the upper bound to be valid. This causes a number of tests to fail because the drivers don't specify RadioFeatures.valid_tuning_steps. If this approach is valid, those drivers will need to be fixed. At least the TH-D72 test passes. ;-) Comments? Tom

1 0

[chirp_devel] [PATCH] patch for bug#4687, discard echoback immediately to avoid
by SASANO Takayoshi 29 Mar '17

29 Mar '17

# HG changeset patch # User SASANO Takayoshi <uaa(a)mx5.nisiq.net> # Date 1490784386 -32400 # Wed Mar 29 19:46:26 2017 +0900 # Node ID 6183c0a2bfb7c6b5d5a80682ac63f55d3794a974 # Parent a5e45271bdec203c2b29cbc1f72f2a8bea0202e4 patch for bug#4687, discard echoback immediately to avoid OS's serial RX buffer overflow. diff -r a5e45271bdec -r 6183c0a2bfb7 chirp/drivers/icf.py --- a/chirp/drivers/icf.py Sun Mar 26 14:51:53 2017 -0700 +++ b/chirp/drivers/icf.py Wed Mar 29 19:46:26 2017 +0900 @@ -198,6 +198,8 @@ pass pipe.write(frame) + pipe.flush() + pipe.read(len(frame)) # discard echoback return frame @@ -261,6 +263,7 @@ LOG.debug("Starting HiSpeed Clone:\n%s" % util.hexprint(buf)) radio.pipe.write(buf) radio.pipe.flush() + radio.pipe.read(len(buf)) # discard echoback def _clone_from_radio(radio):

1 0

[chirp_devel] [PATCH] Natively support null-terminated strings in Browser. #4685
by Tom Hayward 28 Mar '17

28 Mar '17

# HG changeset patch # User Tom Hayward <tom(a)tomh.us> # Date 1490741376 25200 # Tue Mar 28 15:49:36 2017 -0700 # Node ID 54540fcafdf2ce6dcd5a0fd7791155038fbf972e # Parent 17545c2e365451d38a27091f4016f34d7b4f2013 Natively support null-terminated strings in Browser. #4685 When a bitwise char array that contains a null character is requested in the Browser, there is an error: Traceback (most recent call last): File "/home/tom/src/chirp.hg/chirp/ui/radiobrowser.py", line 313, in _tree_click e = CharArrayEditor(item) File "/home/tom/src/chirp.hg/chirp/ui/radiobrowser.py", line 123, in __init__ self._build_ui() File "/home/tom/src/chirp.hg/chirp/ui/radiobrowser.py", line 206, in _build_ui ent.set_text(str(self._element)) TypeError: Gtk.Entry.set_text() argument 1 must be string without null bytes, not str This error results in the char array contents not being displayed at all. All we get is the attribute name. Radios commonly store strings shorter than the maximum length with null characters filling the remaining space. This is so common the browser should be able to display it. This change strips the null characters off the char array so that Gtk doesn't freak out. This results in the string being displayed correctly. The side effect is that the null characters are discarded on change. If the field is edited in the browser, Chirp fills the empty chars with spaces, not null characters like were there originally. Visually there is no difference, but the stored data are different. diff -r 17545c2e3654 -r 54540fcafdf2 chirp/ui/radiobrowser.py --- a/chirp/ui/radiobrowser.py Tue Mar 28 15:42:45 2017 -0700 +++ b/chirp/ui/radiobrowser.py Tue Mar 28 15:49:36 2017 -0700 @@ -202,7 +202,7 @@ def _build_ui(self): ent = FixedEntry(len(self._element)) - ent.set_text(str(self._element)) + ent.set_text(str(self._element).rstrip("\x00")) ent.connect('changed', self._changed) ent.show() self.pack_start(ent, 1, 1, 1)

1 0

[chirp_devel] [PATCH] [RFC] Natively support null-terminated strings in Browser
by Tom Hayward 28 Mar '17

28 Mar '17

# HG changeset patch # User Tom Hayward <tom(a)tomh.us> # Date 1490595310 25200 # Sun Mar 26 23:15:10 2017 -0700 # Node ID 50462c735ef1eee2d3bb2bb2c4d0f49fa0a4f2ef # Parent c558e223d37835907823f1804ade6a8bcf0b4594 [RFC] Natively support null-terminated strings in Browser. When a bitwise char array that contains a null character is requsted in the Browser, there is an error: Traceback (most recent call last): File "/home/tom/src/chirp.hg/chirp/ui/radiobrowser.py", line 313, in _tree_click e = CharArrayEditor(item) File "/home/tom/src/chirp.hg/chirp/ui/radiobrowser.py", line 123, in __init__ self._build_ui() File "/home/tom/src/chirp.hg/chirp/ui/radiobrowser.py", line 206, in _build_ui ent.set_text(str(self._element)) TypeError: Gtk.Entry.set_text() argument 1 must be string without null bytes, not str This errors results in the char array contents not being displayed at all. All we get is the attribute name. Radios commonly store strings shorter than the maximum length with null characters filling the remaining space. This is so common that I think the browser should be able to display it. This patch strips the null characters off the char array so that Gtk doesn't freak out. This results in the string being displayed correctly. The side effect is that the null characters are discarded on change. If the field is edited in the browser, Chirp fills the empty chars with spaces, not null characters like were there originally. Visually there is no difference, but the stored data are different. I don't think this will break anything. Can anyone think of a reason this would be a problem? Is this complete? Should \xFF be stripped as well? They're visually unpleasing, but don't break Gtk like \x00 does. Is there a better way to handle this? Should we use repr() to show the unprintable null characters, then interpret escape characters on set? This is awkward because the Entry has a max length defined to the array size, and could have false positives when people use \ in their labels.) diff -r c558e223d378 -r 50462c735ef1 chirp/ui/radiobrowser.py --- a/chirp/ui/radiobrowser.py Sun Mar 26 22:23:11 2017 -0700 +++ b/chirp/ui/radiobrowser.py Sun Mar 26 23:15:10 2017 -0700 @@ -202,7 +202,7 @@ def _build_ui(self): ent = FixedEntry(len(self._element)) - ent.set_text(str(self._element)) + ent.set_text(str(self._element).rstrip("\x00")) ent.connect('changed', self._changed) ent.show() self.pack_start(ent, 1, 1, 1)

2 1

[chirp_devel] [PATCH] Wait until typing is complete to save RadioSettingValueString. Fixes #4675
by Tom Hayward 26 Mar '17

26 Mar '17

# HG changeset patch # User Tom Hayward <tom(a)tomh.us> # Date 1490565113 25200 # Sun Mar 26 14:51:53 2017 -0700 # Node ID 32e5f4abeb7e7e864514d8183ad6335c35a631b9 # Parent 03c6a0176337955bb971a9e85869d2c2cb361c1a Wait until typing is complete to save RadioSettingValueString. Fixes #4675 diff -r 03c6a0176337 -r 32e5f4abeb7e chirp/ui/settingsedit.py --- a/chirp/ui/settingsedit.py Sun Mar 26 14:20:13 2017 -0700 +++ b/chirp/ui/settingsedit.py Sun Mar 26 14:51:53 2017 -0700 @@ -188,7 +188,8 @@ widget = gtk.Entry() widget.set_width_chars(32) widget.set_text(str(value).rstrip()) - widget.connect("changed", self._save_setting, value) + widget.connect("focus-out-event", lambda w, e, v: + self._save_setting(w, v), value) else: LOG.error("Unsupported widget type: %s" % value.__class__)

1 0

[chirp_devel] [NEW] IC-P7 support
by SASANO Takayoshi 25 Mar '17

25 Mar '17

Hello, here is a code to support Icom's IC-P7 (Japanese Edition). I don't know this code support for IC-P7A/IC-E7. May I commit the diff? -- SASANO Takayoshi (JG1UAA) <uaa(a)mx5.nisiq.net> diff -r 0f6968a11cac chirp/drivers/icp7.py --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/chirp/drivers/icp7.py Sun Mar 26 06:32:26 2017 +0900 @@ -0,0 +1,243 @@ +# Copyright 2017 SASANO Takayoshi (JG1UAA) <uaa(a)uaa.org.uk> +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +from chirp.drivers import icf +from chirp import chirp_common, directory, bitwise + +# memory nuber: +# 000 - 999 regular memory channels (supported, others not) +# 1000 - 1049 scan edges +# 1050 - 1249 auto write channels +# 1250 call channel (C0) +# 1251 call channel (C1) + + +MEM_FORMAT = """ +struct { + ul32 freq; + ul32 offset; + ul16 train_sql:2, + tmode:3, + duplex:2, + train_tone:9; + ul16 tuning_step:4, + rtone:6, + ctone:6; + ul16 unknown0:7, + mode:2, + dtcs:7; + u8 unknown1:6, + dtcs_polarity:2; + char name[6]; +} memory[1251]; + +#seekto 0x6b1e; +struct { + u8 bank; + u8 index; +} banks[1050]; + +#seekto 0x689e; +u8 used[132]; + +#seekto 0x6922; +u8 skips[132]; + +#seekto 0x69a6; +u8 pskips[132]; + +#seekto 0x7352; +struct { + char name[6]; +} bank_names[18]; + +""" + +MODES = ["FM", "WFM", "AM", "Auto"] +TMODES = ["", "Tone", "TSQL", "", "DTCS"] +DUPLEX = ["", "-", "+"] +DTCS_POLARITY = ["NN", "NR", "RN", "RR"] +TUNING_STEPS = [5.0, 6.25, 8.33, 9.0, 10.0, 12.5, 15.0, 20.0, + 25.0, 30.0, 50.0, 100.0, 200.0, 0.0] # 0.0 as "Auto" + + +class ICP7Bank(icf.IcomBank): + """ICP7 bank""" + def get_name(self): + _bank = self._model._radio._memobj.bank_names[self.index] + return str(_bank.name).rstrip() + + def set_name(self, name): + _bank = self._model._radio._memobj.bank_names[self.index] + _bank.name = name.ljust(6)[:6] + + +(a)directory.register +class ICP7Radio(icf.IcomCloneModeRadio): + """Icom IC-P7""" + VENDOR = "Icom" + MODEL = "IC-P7" + + _model = "\x28\x69\x00\x01" + _memsize = 0x7500 + _endframe = "Icom Inc\x2e\x41\x38" + + _ranges = [(0x0000, 0x7500, 32)] + + _num_banks = 18 + _bank_class = ICP7Bank + + def _get_bank(self, loc): + _bank = self._memobj.banks[loc] + if _bank.bank != 0xff: + return _bank.bank + else: + return None + + def _set_bank(self, loc, bank): + _bank = self._memobj.banks[loc] + if bank is None: + _bank.bank = 0xff + else: + _bank.bank = bank + + def _get_bank_index(self, loc): + _bank = self._memobj.banks[loc] + return _bank.index + + def _set_bank_index(self, loc, index): + _bank = self._memobj.banks[loc] + _bank.index = index + + def get_features(self): + rf = chirp_common.RadioFeatures() + rf.memory_bounds = (0, 999) + rf.valid_tmodes = TMODES + rf.valid_duplexes = DUPLEX + rf.valid_modes = MODES + rf.valid_bands = [(495000, 999990000)] + rf.valid_skips = ["", "S", "P"] + rf.valid_tuning_steps = TUNING_STEPS + rf.valid_name_length = 6 + rf.has_ctone = True + rf.has_bank = True + rf.has_bank_index = True + rf.has_bank_names = True + return rf + + def process_mmap(self): + self._memobj = bitwise.parse(MEM_FORMAT, self._mmap) + + def get_raw_memory(self, number): + return repr(self._memobj.memory[number]) + + def get_memory(self, number): + bit = 1 << (number % 8) + byte = int(number / 8) + + _mem = self._memobj.memory[number] + _usd = self._memobj.used[byte] + _skp = self._memobj.skips[byte] + _psk = self._memobj.pskips[byte] + + mem = chirp_common.Memory() + mem.number = number + + if _usd & bit: + mem.empty = True + return mem + + mem.freq = _mem.freq / 3 + mem.offset = _mem.offset / 3 + mem.tmode = TMODES[_mem.tmode] + mem.duplex = DUPLEX[_mem.duplex] + mem.tuning_step = TUNING_STEPS[_mem.tuning_step] + mem.rtone = chirp_common.TONES[_mem.rtone] + mem.ctone = chirp_common.TONES[_mem.ctone] + mem.mode = MODES[_mem.mode] + mem.dtcs = chirp_common.DTCS_CODES[_mem.dtcs] + mem.dtcs_polarity = DTCS_POLARITY[_mem.dtcs_polarity] + mem.name = str(_mem.name).rstrip() + + if _skp & bit: + mem.skip = "P" if _psk & bit else "S" + else: + mem.skip = "" + + return mem + + def set_memory(self, mem): + bit = 1 << (mem.number % 8) + byte = int(mem.number / 8) + + _mem = self._memobj.memory[mem.number] + _usd = self._memobj.used[byte] + _skp = self._memobj.skips[byte] + _psk = self._memobj.pskips[byte] + + _mem.set_raw("\x00" * (_mem.size() / 8)) + + if mem.empty: + _usd |= bit + + # We use default value instead of zero-fill + # to avoid unexpected behavior. + _mem.freq = 15000 + _mem.offset = 479985000 + _mem.train_sql = ~0 + _mem.tmode = ~0 + _mem.duplex = ~0 + _mem.train_tone = ~0 + _mem.tuning_step = ~0 + _mem.rtone = ~0 + _mem.ctone = ~0 + _mem.unknown0 = 1 + _mem.mode = ~0 + _mem.dtcs = ~0 + _mem.unknown1 = ~0 + _mem.dtcs_polarity = ~0 + _mem.name = " " + + _skp |= bit + _psk |= bit + + else: + _usd &= ~bit + + _mem.freq = mem.freq * 3 + _mem.offset = mem.offset * 3 + _mem.train_sql = 0 # Train SQL mode (0:off 1:Tone 2:MSK) + _mem.tmode = TMODES.index(mem.tmode) + _mem.duplex = DUPLEX.index(mem.duplex) + _mem.train_tone = 228 # Train SQL Tone (x10Hz) + _mem.tuning_step = TUNING_STEPS.index(mem.tuning_step) + _mem.rtone = chirp_common.TONES.index(mem.rtone) + _mem.ctone = chirp_common.TONES.index(mem.ctone) + _mem.unknown0 = 0 # unknown (always zero) + _mem.mode = MODES.index(mem.mode) + _mem.dtcs = chirp_common.DTCS_CODES.index(mem.dtcs) + _mem.unknown1 = ~0 # unknown (always one) + _mem.dtcs_polarity = DTCS_POLARITY.index(mem.dtcs_polarity) + _mem.name = mem.name.ljust(6)[:6] + + if mem.skip == "S": + _skp |= bit + _psk &= ~bit + elif mem.skip == "P": + _skp |= bit + _psk |= bit + else: + _skp &= ~bit + _psk &= ~bit

1 0

[chirp_devel] [PATCH] [THD72] Fix buggy memory initialization. #1611
by Tom Hayward 20 Mar '17

20 Mar '17

# HG changeset patch # User Tom Hayward <tom(a)tomh.us> # Date 1490072555 25200 # Mon Mar 20 22:02:35 2017 -0700 # Node ID cb2203c77d167562ad77ce005a3fc76fff3645de # Parent 6b5b397b4859dd64603d7c4a0b91ffdbdfbe2bb6 [THD72] Fix buggy memory initialization. #1611 Allows channels added by Chirp to transmit. diff -r 6b5b397b4859 -r cb2203c77d16 chirp/drivers/thd72.py --- a/chirp/drivers/thd72.py Fri Mar 17 15:17:57 2017 -0700 +++ b/chirp/drivers/thd72.py Mon Mar 20 22:02:35 2017 -0700 @@ -69,6 +69,12 @@ u8 passwd[6]; } frontmatter; +#seekto 0x02c0; +struct { + ul32 start_freq; + ul32 end_freq; +} prog_vfo[6]; + #seekto 0x0300; struct { char power_on_msg[8]; @@ -89,8 +95,8 @@ #seekto 0x0c00; struct { - u8 disabled:7, - unknown0:1; + u8 disabled:4, + prog_vfo:4; u8 skip; } flag[1032]; @@ -183,8 +189,23 @@ EXCH_R = "R\x00\x00\x00\x00" EXCH_W = "W\x00\x00\x00\x00" -# Uploads result in "MCP Error" and garbage data in memory -# Clone driver disabled in favor of error-checking live driver. +DEFAULT_PROG_VFO = ( + (136000000, 174000000), + (410000000, 470000000), + (118000000, 136000000), + (136000000, 174000000), + (320000000, 400000000), + (400000000, 524000000), +) +# index of PROG_VFO used for setting memory.unknown1 and memory.unknown2 +# see http://chirp.danplanet.com/issues/1611#note-9 +UNKNOWN_LOOKUP = (0, 7, 4, 0, 4, 7) + +def get_prog_vfo(frequency): + for i, (start, end) in enumerate(DEFAULT_PROG_VFO): + if start <= frequency < end: + return i + raise ValueError("Frequency is out of range.") @directory.register @@ -283,7 +304,7 @@ def get_raw_memory(self, number): return repr(self._memobj.memory[number]) + \ - repr(self._memobj.flag[(number)]) + repr(self._memobj.flag[number]) def get_memory(self, number): if isinstance(number, str): @@ -305,7 +326,7 @@ if number > 999: mem.extd_number = THD72_SPECIAL_REV[number] - if flag.disabled == 0x7f: + if flag.disabled == 0xf: mem.empty = True return mem @@ -348,9 +369,9 @@ self.add_dirty_block(self._memobj.flag[mem.number]) # only delete non-WX channels - was_empty = flag.disabled == 0x7f + was_empty = flag.disabled == 0xf if mem.empty: - flag.disabled = 0x7f + flag.disabled = 0xf return flag.disabled = 0 @@ -373,6 +394,10 @@ _mem.offset = mem.offset _mem.mode = MODES_REV[mem.mode] + prog_vfo = get_prog_vfo(mem.freq) + flag.prog_vfo = prog_vfo + _mem.unknown1 = _mem.unknown2 = UNKNOWN_LOOKUP[prog_vfo] + if mem.number < 999: flag.skip = chirp_common.SKIP_VALUES.index(mem.skip) @@ -509,9 +534,8 @@ raise errors.RadioError("No response to ID command") def initialize(self, mmap): - mmap[0] = \ - "\x80\xc8\xb3\x08\x00\x01\x00\x08" + \ - "\x08\x00\xc0\x27\x09\x00\x00\xff" + mmap.set_raw("\x00\xc8\xb3\x08\x00\x01\x00\x08" + "\x08\x00\xc0\x27\x09\x00\x00\x00") def _get_settings(self): top = RadioSettings(self._get_display_settings(),

1 0

[chirp_devel] Build test results: Successful
by Build System 20 Mar '17

20 Mar '17

Tested changes: [Jim Unroe <rock.unroe(a)gmail.com>] [UV-25X2] Add Support for new BTech Color Display Mobile Radios This patch modifies the btech.py driver to support additional mobile radios that have an OLED color display. Additional radio models supported: BTech UV-25X4 (quad band) BTech UV-25X2 (dual band) BTech UV-50X2 (dual band) New Model #4269 [Dan Smith <dsmith(a)danplanet.com>] Add some stuff to .hgignore for build system storage #0 [Tom Hayward <tom(a)tomh.us>] [id880] Fix typo in charset definition. #281 [Tom Hayward <tom(a)tomh.us>] [thf6a] Support full charset (ASCII). Fixes #141 [Tom Hayward <tom(a)tomh.us>] [id880] Support full charset. Fixes #281 [Tom Hayward <tom(a)tomh.us>] [vx5] Support full charset (ASCII). Fixes #292 [Tom Hayward <tom(a)tomh.us>] [id31a] set used bit when creating new memory, clear when deleting. Fixes #269 [Tom Hayward <tom(a)tomh.us>] Support PyGTK < 2.22 in bank edit. Fixes #231 [Tom Hayward <tom(a)tomh.us>] [d710] [v71] [d72] Fix tone list (not all tones are supported). Fixes #212 [Dan Smith <dsmith(a)danplanet.com>] [vx7] Fix setting memory power levels on 220MHz band Fixes #214 [Dan Smith <dsmith(a)danplanet.com>] fips: Pennsylvania FIPS code was wrong. #117 [Marco Filippi <iz3gme.marco(a)gmail.com>] Consider lower bound frequency of each valid_band as valid Fix bug #181 [Tom Hayward <tom(a)tomh.us>] tmd700: allow 8-char names. Fixes #176 [Dan Smith <dsmith(a)danplanet.com>] Fix the "blind deletion" problem, as well as properly direct copy/paste Fixes #172 [David Griffith <dave(a)661.org>] Bug #155 fix: VX-7 1.25m power levels [David Griffith <dave(a)661.org>] New INSTALL and README files Fixes #122 [Tom Hayward <tom(a)tomh.us>] thd72: only use hardware flow on OS X. Fixes #166 [Marco Filippi <iz3gme.marco(a)gmail.com>] [FT817] Tone freq not set correctly Same as #88 for FT857, to avoid code duplication fix code have been moved from ft857 to its ancestor class Fix bug #163 [Tom Hayward <tom(a)tomh.us>] Fix Mac .app so paths with spaces work. Fixes Bug #145 Full log: Started by an SCM change Building in workspace /var/lib/jenkins/jobs/chirp-test/workspace [workspace] $ hg showconfig paths.default [workspace] $ hg pull --rev default [workspace] $ hg update --clean --rev default 2 files updated, 0 files merged, 0 files removed, 0 files unresolved [workspace] $ hg log --rev . --template {node} [workspace] $ hg log --rev . --template {rev} [workspace] $ hg log --rev 725ca2b3970cb906b4cc3a224f602d561a40a885 [workspace] $ hg log --template "<changeset node='{node}' author='{author|xmlescape}' rev='{rev}' date='{date}'><msg>{desc|xmlescape}</msg><added>{file_adds|stringify|xmlescape}</added><deleted>{file_dels|stringify|xmlescape}</deleted><files>{files|stringify|xmlescape}</files><parents>{parents}</parents></changeset>\n" --rev default:0 --follow --prune 725ca2b3970cb906b4cc3a224f602d561a40a885 No emails were triggered. [workspace] $ /bin/sh -xe /tmp/hudson7884399944485778806.sh [workspace] $ /bin/sh -xe /tmp/hudson6476909661272652926.sh + PATH=/usr/bin:/bin:/usr/local/bin ./run_all_tests.sh test_bit_array (tests.unit.test_bitwise.TestBitType) ... ok test_bit_array_fail (tests.unit.test_bitwise.TestBitType) ... ok test_bitfield_u16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_u24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_u8 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_ul16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_ul24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_bbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_lbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_lbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_int_array (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u8 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_char (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string_invalid_chars (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string_wrong_length (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_comment_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok test_comment_inline_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok test_missing_semicolon (tests.unit.test_bitwise.TestBitwiseErrors) ... ok test_seek (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_seekto (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_struct_one_element (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_two_elements (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_writes (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok split_tone_encode_test_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_none (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_none (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_fix_rounded_step_250 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_500 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_750 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_12_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_2_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_5_0 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_6_25 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_fractional_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step_fail (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_format_freq (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_bad (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_decimal (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whitespace (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whole (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_ensure_has_calls_almost_full (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_empty (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_partial (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full1 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full2 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_urcall_full (tests.unit.test_import_logic.DstarTests) ... ok test_import_bank (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffA_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffB_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_negative (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_too_big_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_uhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_errors (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_warnings (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_invalid (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_am (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_fm (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_name (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_closest (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_dst (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_src (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_same (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffA_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffB_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModelIndexInterface) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_icom_bank (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_index_bounds (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_next_mapping_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_auto_tone_mode_cross (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_pol (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_rx (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tone (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tsql (tests.unit.test_memedit_edits.TestEdits) ... ok test_init (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_bad_portnames (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_sorted (tests.unit.test_platform.Win32PlatformTest) ... ok test_apply_callback (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_group (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_multi (tests.unit.test_settings.TestSettingContainers) ... ok test_changed (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_boolean (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_float (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_integer (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_list (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_string (tests.unit.test_settings.TestSettingValues) ... ok test_validate_callback (tests.unit.test_settings.TestSettingValues) ... ok test_delete_hole_with_all (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_all_full (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_without_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_with_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_without_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok ---------------------------------------------------------------------- Ran 151 tests in 0.053s OK Patch 'tip' is OK Checking for PEP8 regressions... ./chirp/platform.py:255:80: E501 line too long (82 > 79 characters) ./chirp/ui/mainapp.py:1909:80: E501 line too long (82 > 79 characters) ./chirp/ui/mainapp.py:1965:80: E501 line too long (82 > 79 characters) real 0m7.620s user 0m7.528s sys 0m0.028s ================================================ Tests OK + cat /var/lib/jenkins/.chirp/debug.log [2017-03-20 18:29:09,493] chirp.logger - DEBUG: CHIRP 0.3.0dev on Linux - Ubuntu 16.04.1 LTS (Python 2.7.12) [2017-03-20 18:29:09,535] chirp.directory - INFO: Registered Kenwood_TH-D7 = THD7Radio [2017-03-20 18:29:09,536] chirp.directory - INFO: Registered Kenwood_TH-D7G = THD7GRadio [2017-03-20 18:29:09,536] chirp.directory - INFO: Registered Kenwood_TM-D700 = TMD700Radio [2017-03-20 18:29:09,536] chirp.directory - INFO: Registered Kenwood_TM-V7 = TMV7Radio [2017-03-20 18:29:09,536] chirp.directory - INFO: Registered Kenwood_TM-G707 = TMG707Radio [2017-03-20 18:29:09,536] chirp.directory - INFO: Registered Kenwood_TH-G71 = THG71Radio [2017-03-20 18:29:09,536] chirp.directory - INFO: Registered Kenwood_TH-F6 = THF6ARadio [2017-03-20 18:29:09,536] chirp.directory - INFO: Registered Kenwood_TH-F7 = THF7ERadio [2017-03-20 18:29:09,536] chirp.directory - INFO: Registered Kenwood_TM-D710 = TMD710Radio [2017-03-20 18:29:09,536] chirp.directory - INFO: Registered Kenwood_TH-D72_live_mode = THD72Radio [2017-03-20 18:29:09,536] chirp.directory - INFO: Registered Kenwood_TM-V71 = TMV71Radio [2017-03-20 18:29:09,536] chirp.directory - INFO: Registered Kenwood_TM-D710G = TMD710GRadio [2017-03-20 18:29:09,537] chirp.directory - INFO: Registered Kenwood_TH-K2 = THK2Radio [2017-03-20 18:29:09,537] chirp.directory - INFO: Registered Kenwood_TM-271 = TM271Radio [2017-03-20 18:29:09,537] chirp.directory - INFO: Registered Kenwood_TM-281 = TM281Radio [2017-03-20 18:29:09,537] chirp.directory - INFO: Registered Kenwood_TM-471 = TM471Radio [2017-03-20 18:29:09,537] chirp.directory - INFO: Registered Icom_7200 = Icom7200Radio [2017-03-20 18:29:09,537] chirp.directory - INFO: Registered Icom_IC-7000 = Icom7000Radio [2017-03-20 18:29:09,537] chirp.directory - INFO: Registered Icom_IC-7100 = Icom7100Radio [2017-03-20 18:29:09,537] chirp.directory - INFO: Registered Icom_746 = Icom746Radio [2017-03-20 18:29:09,540] chirp.directory - INFO: Registered Alinco_DR03T = DR03Radio [2017-03-20 18:29:09,540] chirp.directory - INFO: Registered Alinco_DR06T = DR06Radio [2017-03-20 18:29:09,540] chirp.directory - INFO: Registered Alinco_DR135T = DR135Radio [2017-03-20 18:29:09,540] chirp.directory - INFO: Registered Alinco_DR235T = DR235Radio [2017-03-20 18:29:09,540] chirp.directory - INFO: Registered Alinco_DR435T = DR435Radio [2017-03-20 18:29:09,540] chirp.directory - INFO: Registered Alinco_DJ596 = DJ596Radio [2017-03-20 18:29:09,540] chirp.directory - INFO: Registered Jetstream_JT220M = JT220MRadio [2017-03-20 18:29:09,540] chirp.directory - INFO: Registered Alinco_DJ175 = DJ175Radio [2017-03-20 18:29:09,541] chirp.directory - INFO: Registered Alinco_DJ-G7EG = AlincoDJG7EG [2017-03-20 18:29:09,541] chirp.directory - INFO: Registered AnyTone_5888UV = AnyTone5888UVRadio [2017-03-20 18:29:09,541] chirp.directory - INFO: Registered Intek_HR-2040 = IntekHR2040Radio [2017-03-20 18:29:09,541] chirp.directory - INFO: Registered Polmar_DB-50M = PolmarDB50MRadio [2017-03-20 18:29:09,541] chirp.directory - INFO: Registered Powerwerx_DB-750X = PowerwerxDB750XRadio [2017-03-20 18:29:09,541] chirp.directory - INFO: Registered AnyTone_TERMN-8R = AnyToneTERMN8RRadio [2017-03-20 18:29:09,542] chirp.directory - INFO: Registered AnyTone_OBLTR-8R = AnyToneOBLTR8RRadio [2017-03-20 18:29:09,542] chirp.directory - INFO: Registered Baofeng_UV-3R = UV3RRadio [2017-03-20 18:29:09,543] chirp.directory - INFO: Registered Baofeng_BF-A58 = BFA58 [2017-03-20 18:29:09,543] chirp.directory - INFO: Registered Baofeng_UV-82WP = UV82WP [2017-03-20 18:29:09,543] chirp.directory - INFO: Registered Baofeng_GT-3WP = GT3WP [2017-03-20 18:29:09,543] chirp.directory - INFO: Registered Retevis_RT6 = RT6 [2017-03-20 18:29:09,543] chirp.directory - INFO: Registered Baojie_BJ-9900 = BJ9900Radio [2017-03-20 18:29:09,544] chirp.directory - INFO: Registered Baofeng_UV-5R = BaofengUV5RGeneric [2017-03-20 18:29:09,544] chirp.directory - INFO: Registered Baofeng_F-11 = BaofengF11Radio [2017-03-20 18:29:09,544] chirp.directory - INFO: Registered Baofeng_UV-82 = BaofengUV82Radio [2017-03-20 18:29:09,544] chirp.directory - INFO: Registered Baofeng_UV-6 = BaofengUV6Radio [2017-03-20 18:29:09,544] chirp.directory - INFO: Registered Intek_KT-980HP = IntekKT980Radio [2017-03-20 18:29:09,544] chirp.directory - INFO: Registered Baofeng_BF-F8HP = BaofengBFF8HPRadio [2017-03-20 18:29:09,545] chirp.directory - INFO: Registered Baofeng_UV-82HP = BaofengUV82HPRadio [2017-03-20 18:29:09,545] chirp.directory - INFO: Registered Baojie_BJ-UV55 = BaojieBJUV55Radio [2017-03-20 18:29:09,545] chirp.directory - INFO: Registered BTECH_UV-2501 = UV2501 [2017-03-20 18:29:09,546] chirp.directory - INFO: Registered BTECH_UV-2501+220 = UV2501_220 [2017-03-20 18:29:09,546] chirp.directory - INFO: Registered BTECH_UV-5001 = UV5001 [2017-03-20 18:29:09,546] chirp.directory - INFO: Registered WACCOM_MINI-8900 = MINI8900 [2017-03-20 18:29:09,546] chirp.directory - INFO: Registered QYT_KT-UV980 = KTUV980 [2017-03-20 18:29:09,546] chirp.directory - INFO: Registered QYT_KT8900 = KT9800 [2017-03-20 18:29:09,546] chirp.directory - INFO: Registered QYT_KT8900R = KT9800R [2017-03-20 18:29:09,546] chirp.directory - INFO: Registered LUITON_LT-588UV = LT588UV [2017-03-20 18:29:09,546] chirp.directory - INFO: Registered BTECH_UV-25X2 = UV25X2 [2017-03-20 18:29:09,546] chirp.directory - INFO: Registered BTECH_UV-25X4 = UV25X4 [2017-03-20 18:29:09,546] chirp.directory - INFO: Registered BTECH_UV-50X2 = UV50X2 [2017-03-20 18:29:09,546] chirp.directory - INFO: Registered QYT_KT7900D = KT7900D [2017-03-20 18:29:09,547] chirp.directory - INFO: Registered QYT_KT8900D = KT8900D [2017-03-20 18:29:09,547] chirp.directory - INFO: Registered Feidaxin_FD-268A = FD268ARadio [2017-03-20 18:29:09,547] chirp.directory - INFO: Registered Feidaxin_FD-268B = FD268BRadio [2017-03-20 18:29:09,547] chirp.directory - INFO: Registered Feidaxin_FD-288A = FD288ARadio [2017-03-20 18:29:09,547] chirp.directory - INFO: Registered Feidaxin_FD-288B = FD288BRadio [2017-03-20 18:29:09,547] chirp.directory - INFO: Registered Feidaxin_FD-150A = FD150ARadio [2017-03-20 18:29:09,547] chirp.directory - INFO: Registered Feidaxin_FD-160A = FD160ARadio [2017-03-20 18:29:09,547] chirp.directory - INFO: Registered Feidaxin_FD-450A = FD450ARadio [2017-03-20 18:29:09,547] chirp.directory - INFO: Registered Feidaxin_FD-460A = FD460ARadio [2017-03-20 18:29:09,548] chirp.directory - INFO: Registered Feidaxin_FD-460UH = FD460UHRadio [2017-03-20 18:29:09,548] chirp.directory - INFO: Registered Yaesu_FT-1802M = FT1802Radio [2017-03-20 18:29:09,549] chirp.directory - INFO: Registered Yaesu_FT-1D_R = FT1Radio [2017-03-20 18:29:09,549] chirp.directory - INFO: Registered Yaesu_FT-2800M = FT2800Radio [2017-03-20 18:29:09,549] chirp.directory - INFO: Registered Yaesu_FT-2900R_1900R = FT2900Radio [2017-03-20 18:29:09,550] chirp.directory - INFO: Registered Yaesu_FT-50 = FT50Radio [2017-03-20 18:29:09,550] chirp.directory - INFO: Registered Yaesu_FT-60 = FT60Radio [2017-03-20 18:29:09,550] chirp.directory - INFO: Registered Yaesu_FT-7800_7900 = FT7800Radio [2017-03-20 18:29:09,551] chirp.directory - INFO: Registered Yaesu_FT-8800 = FT8800Radio [2017-03-20 18:29:09,551] chirp.directory - INFO: Registered Yaesu_FT-8900 = FT8900Radio [2017-03-20 18:29:09,551] chirp.directory - INFO: Registered Yaesu_FT-8100 = FT8100Radio [2017-03-20 18:29:09,551] chirp.directory - INFO: Registered Yaesu_FT-817 = FT817Radio [2017-03-20 18:29:09,551] chirp.directory - INFO: Registered Yaesu_FT-817ND = FT817NDRadio [2017-03-20 18:29:09,552] chirp.directory - INFO: Registered Yaesu_FT-817ND_US = FT817NDUSRadio [2017-03-20 18:29:09,552] chirp.directory - INFO: Registered Yaesu_FT-857_897 = FT857Radio [2017-03-20 18:29:09,552] chirp.directory - INFO: Registered Yaesu_FT-857_897_US = FT857USRadio [2017-03-20 18:29:09,552] chirp.directory - INFO: Registered Yaesu_FT-90 = FT90Radio [2017-03-20 18:29:09,552] chirp.directory - INFO: Registered Yaesu_FTM-350 = FTM350Radio [2017-03-20 18:29:09,553] chirp.directory - INFO: Registered Generic_CSV = CSVRadio [2017-03-20 18:29:09,553] chirp.directory - INFO: Registered Commander_KG-UV = CommanderCSVRadio [2017-03-20 18:29:09,553] chirp.directory - INFO: Registered RT_Systems_CSV = RTCSVRadio [2017-03-20 18:29:09,554] chirp.directory - INFO: Registered ARRL_Travel_Plus = TpeRadio [2017-03-20 18:29:09,561] chirp.directory - INFO: Registered Generic_XML = XMLRadio [2017-03-20 18:29:09,561] chirp.directory - INFO: Registered BTECH_GMRS-V1 = GMRSV1 [2017-03-20 18:29:09,572] chirp.directory - INFO: Registered Baofeng_BF-888 = H777Radio [2017-03-20 18:29:09,572] chirp.directory - INFO: Registered HobbyPCB_RS-UV3 = HobbyPCBRSUV3Radio [2017-03-20 18:29:09,573] chirp.directory - INFO: Registered Icom_IC-208H = IC208Radio [2017-03-20 18:29:09,573] chirp.directory - INFO: Registered Icom_IC-2100H = IC2100Radio [2017-03-20 18:29:09,573] chirp.directory - INFO: Registered Icom_IC-2200H = IC2200Radio [2017-03-20 18:29:09,573] chirp.directory - INFO: Registered Icom_IC-2720H = IC2720Radio [2017-03-20 18:29:09,574] chirp.directory - INFO: Registered Icom_IC-2820H = IC2820Radio [2017-03-20 18:29:09,574] chirp.directory - INFO: Registered Icom_IC-91_92AD = IC9xRadio [2017-03-20 18:29:09,575] chirp.directory - INFO: Registered Icom_IC-Q7A = ICQ7Radio [2017-03-20 18:29:09,575] chirp.directory - INFO: Registered Icom_IC-T70 = ICT70Radio [2017-03-20 18:29:09,575] chirp.directory - INFO: Registered Icom_IC-T7H = ICT7HRadio [2017-03-20 18:29:09,575] chirp.directory - INFO: Registered Icom_IC-T8A = ICT8ARadio [2017-03-20 18:29:09,576] chirp.directory - INFO: Registered Icom_IC-W32A = ICW32ARadio [2017-03-20 18:29:09,576] chirp.directory - INFO: Registered Icom_IC-W32E = ICW32ERadio [2017-03-20 18:29:09,576] chirp.directory - INFO: Registered Icom_IC-V82_U82 = ICx8xRadio [2017-03-20 18:29:09,577] chirp.directory - INFO: Registered Icom_ID-31A = ID31Radio [2017-03-20 18:29:09,577] chirp.directory - INFO: Registered Icom_ID-51 = ID51Radio [2017-03-20 18:29:09,577] chirp.directory - INFO: Registered Icom_ID-51_Plus = ID51PLUSRadio [2017-03-20 18:29:09,577] chirp.directory - INFO: Registered Icom_ID-800H_v2 = ID800v2Radio [2017-03-20 18:29:09,577] chirp.directory - INFO: Registered Icom_ID-880H = ID880Radio [2017-03-20 18:29:09,578] chirp.directory - INFO: Registered Icom_ID-80H = ID80Radio [2017-03-20 18:29:09,578] chirp.directory - INFO: Registered Kenwood_HMK = HMKRadio [2017-03-20 18:29:09,578] chirp.directory - INFO: Registered Kenwood_ITM = ITMRadio [2017-03-20 18:29:09,579] chirp.directory - INFO: Registered Wouxun_KG-UV8D = KGUV8DRadio [2017-03-20 18:29:09,579] chirp.directory - INFO: Registered KYD_NC-630A = NC630aRadio [2017-03-20 18:29:09,579] chirp.directory - INFO: Registered KYD_IP-620 = IP620Radio [2017-03-20 18:29:09,580] chirp.directory - INFO: Registered Leixen_VV-898 = LeixenVV898Radio [2017-03-20 18:29:09,580] chirp.directory - INFO: Registered Jetstream_JT270M = JetstreamJT270MRadio [2017-03-20 18:29:09,580] chirp.directory - INFO: Registered Jetstream_JT270MH = JetstreamJT270MHRadio [2017-03-20 18:29:09,580] chirp.directory - INFO: Registered Leixen_VV-898S = LeixenVV898SRadio [2017-03-20 18:29:09,581] chirp.directory - INFO: Registered LUITON_LT-725UV = LT725UV [2017-03-20 18:29:09,582] chirp.directory - INFO: Registered Wouxun_KG-UVD1P = KGUVD1PRadio [2017-03-20 18:29:09,582] chirp.directory - INFO: Registered Wouxun_KG-UV6 = KGUV6DRadio [2017-03-20 18:29:09,582] chirp.directory - INFO: Registered Wouxun_KG-816 = KG816Radio [2017-03-20 18:29:09,583] chirp.directory - INFO: Registered Wouxun_KG-818 = KG818Radio [2017-03-20 18:29:09,583] chirp.directory - INFO: Registered Puxing_PX-777 = Puxing777Radio [2017-03-20 18:29:09,583] chirp.directory - INFO: Registered Puxing_PX-2R = Puxing2RRadio [2017-03-20 18:29:09,584] chirp.directory - INFO: Registered Puxing_PX-888K = Puxing_PX888K_Radio [2017-03-20 18:29:09,584] chirp.directory - INFO: Registered Retevis_RT1 = RT1Radio [2017-03-20 18:29:09,584] chirp.directory - INFO: Registered Retevis_RT21 = RT21Radio [2017-03-20 18:29:09,584] chirp.directory - INFO: Registered Retevis_RT22 = RT22Radio [2017-03-20 18:29:09,585] chirp.directory - INFO: Registered WLN_KD-C1 = KDC1 [2017-03-20 18:29:09,585] chirp.directory - INFO: Registered Zastone_ZT-X6 = ZTX6 [2017-03-20 18:29:09,585] chirp.directory - INFO: Registered LUITON_LT-316 = LT316 [2017-03-20 18:29:09,585] chirp.directory - INFO: Registered TID_TD-M8 = TDM8 [2017-03-20 18:29:09,585] chirp.directory - INFO: Registered TDXone_TD-Q8A = TDXoneTDQ8A [2017-03-20 18:29:09,586] chirp.directory - INFO: Registered TYT_TH-7800_File = TYTTH7800File [2017-03-20 18:29:09,586] chirp.directory - INFO: Registered TYT_TH-7800 = TYTTH7800Radio [2017-03-20 18:29:09,586] chirp.directory - INFO: Registered TYT_TH9000_220 = Th9000220Radio [2017-03-20 18:29:09,586] chirp.directory - INFO: Registered TYT_TH9000_144 = Th9000144Radio [2017-03-20 18:29:09,586] chirp.directory - INFO: Registered TYT_TH9000_440 = Th9000440Radio [2017-03-20 18:29:09,587] chirp.directory - INFO: Registered TYT_TH-9800_File = TYTTH9800File [2017-03-20 18:29:09,587] chirp.directory - INFO: Registered TYT_TH-9800 = TYTTH9800Radio [2017-03-20 18:29:09,587] chirp.directory - INFO: Registered TYT_TH-UV3R = TYTUV3RRadio [2017-03-20 18:29:09,587] chirp.directory - INFO: Registered TYT_TH-UV3R-25 = TYTUV3R25Radio [2017-03-20 18:29:09,587] chirp.directory - INFO: Registered TYT_TH-UVF8D = TYTUVF8DRadio [2017-03-20 18:29:09,588] chirp.directory - INFO: Registered Kenwood_TH-D72_clone_mode = THD72Radio [2017-03-20 18:29:09,588] chirp.directory - INFO: Registered TYT_TH-UVF1 = TYTTHUVF1Radio [2017-03-20 18:29:09,588] chirp.directory - INFO: Registered Kenwood_TK-260 = TK260_Radio [2017-03-20 18:29:09,588] chirp.directory - INFO: Registered Kenwood_TK-270 = TK270_Radio [2017-03-20 18:29:09,589] chirp.directory - INFO: Registered Kenwood_TK-272 = TK272_Radio [2017-03-20 18:29:09,589] chirp.directory - INFO: Registered Kenwood_TK-278 = TK278_Radio [2017-03-20 18:29:09,589] chirp.directory - INFO: Registered Kenwood_TK-360 = TK360_Radio [2017-03-20 18:29:09,589] chirp.directory - INFO: Registered Kenwood_TK-370 = TK370_Radio [2017-03-20 18:29:09,589] chirp.directory - INFO: Registered Kenwood_TK-372 = TK372_Radio [2017-03-20 18:29:09,589] chirp.directory - INFO: Registered Kenwood_TK-378 = TK378_Radio [2017-03-20 18:29:09,589] chirp.directory - INFO: Registered Kenwood_TK-760 = TK760_Radio [2017-03-20 18:29:09,589] chirp.directory - INFO: Registered Kenwood_TK-762 = TK762_Radio [2017-03-20 18:29:09,590] chirp.directory - INFO: Registered Kenwood_TK-768 = TK768_Radio [2017-03-20 18:29:09,590] chirp.directory - INFO: Registered Kenwood_TK-860 = TK860_Radio [2017-03-20 18:29:09,590] chirp.directory - INFO: Registered Kenwood_TK-862 = TK862_Radio [2017-03-20 18:29:09,590] chirp.directory - INFO: Registered Kenwood_TK-868 = TK868_Radio [2017-03-20 18:29:09,590] chirp.directory - INFO: Registered Kenwood_TK-868G = TK868G_Radios [2017-03-20 18:29:09,590] chirp.directory - INFO: Registered Kenwood_TK-862G = TK862G_Radios [2017-03-20 18:29:09,590] chirp.directory - INFO: Registered Kenwood_TK-860G = TK860G_Radios [2017-03-20 18:29:09,591] chirp.directory - INFO: Registered Kenwood_TK-768G = TK768G_Radios [2017-03-20 18:29:09,591] chirp.directory - INFO: Registered Kenwood_TK-762G = TK762G_Radios [2017-03-20 18:29:09,591] chirp.directory - INFO: Registered Kenwood_TK-760G = TK760G_Radios [2017-03-20 18:29:09,591] chirp.directory - INFO: Registered Kenwood_TK-388G = TK388G_Radios [2017-03-20 18:29:09,591] chirp.directory - INFO: Registered Kenwood_TK-378G = TK378G_Radios [2017-03-20 18:29:09,591] chirp.directory - INFO: Registered Kenwood_TK-372G = TK372G_Radios [2017-03-20 18:29:09,591] chirp.directory - INFO: Registered Kenwood_TK-370G = TK370G_Radios [2017-03-20 18:29:09,591] chirp.directory - INFO: Registered Kenwood_TK-360G = TK360G_Radios [2017-03-20 18:29:09,591] chirp.directory - INFO: Registered Kenwood_TK-278G = TK278G_Radios [2017-03-20 18:29:09,591] chirp.directory - INFO: Registered Kenwood_TK-272G = TK272G_Radios [2017-03-20 18:29:09,591] chirp.directory - INFO: Registered Kenwood_TK-270G = TK270G_Radios [2017-03-20 18:29:09,591] chirp.directory - INFO: Registered Kenwood_TK-260G = TK260G_Radios [2017-03-20 18:29:09,592] chirp.directory - INFO: Registered Kenwood_TK-7102 = KenwoodTK7102Radio [2017-03-20 18:29:09,592] chirp.directory - INFO: Registered Kenwood_TK-8102 = KenwoodTK8102Radio [2017-03-20 18:29:09,592] chirp.directory - INFO: Registered Kenwood_TK-7108 = KenwoodTK7108Radio [2017-03-20 18:29:09,592] chirp.directory - INFO: Registered Kenwood_TK-8108 = KenwoodTK8108Radio [2017-03-20 18:29:09,592] chirp.directory - INFO: Registered Kenwood_TS-2000 = TS2000Radio [2017-03-20 18:29:09,593] chirp.directory - INFO: Registered BTECH_UV-5X3 = UV5X3 [2017-03-20 18:29:09,593] chirp.directory - INFO: Registered Baofeng_UV-6R = UV6R [2017-03-20 18:29:09,593] chirp.directory - INFO: Registered Baofeng_UV-B5 = BaofengUVB5 [2017-03-20 18:29:09,594] chirp.directory - INFO: Registered BTECH_UV-50X3 = UV50X3 [2017-03-20 18:29:09,594] chirp.directory - INFO: Registered Yaesu_VX-170 = VX170Radio [2017-03-20 18:29:09,594] chirp.directory - INFO: Registered Yaesu_VX-2 = VX2Radio [2017-03-20 18:29:09,595] chirp.directory - INFO: Registered Yaesu_VX-3 = VX3Radio [2017-03-20 18:29:09,595] chirp.directory - INFO: Registered Yaesu_VX-5 = VX5Radio [2017-03-20 18:29:09,595] chirp.directory - INFO: Registered Yaesu_VX-6 = VX6Radio [2017-03-20 18:29:09,596] chirp.directory - INFO: Registered Yaesu_VX-7 = VX7Radio [2017-03-20 18:29:09,596] chirp.directory - INFO: Registered Yaesu_VX-8_R = VX8Radio [2017-03-20 18:29:09,596] chirp.directory - INFO: Registered Yaesu_VX-8_DR = VX8DRadio [2017-03-20 18:29:09,596] chirp.directory - INFO: Registered Yaesu_VX-8_GE = VX8GERadio [2017-03-20 18:29:09,597] chirp.directory - INFO: Registered Vertex_Standard_VXA-700 = VXA700Radio Email was triggered for: Success Sending email for trigger: Success

1 0

[chirp_devel] IC-P7 .ICF format
by SASANO Takayoshi 20 Mar '17

20 Mar '17

Hello, Recently I bought ICOM's IC-P7 transceiver and CS-P7 software. I want to use CHIRP with this rig and I tried to analyze .ICF file. I am not familiar with Python (because I was C programmer), so I write the result here for developer's help. - - - - - - - - *** memory layout 0x0000 memory settings (1251 channels, 21bytes/channel) ch #0~999 normal memory ch.0~999 ch #1000~1049 Prog.scan edge 00A, 00B ... 24A, 24B ch #1050~1249 auto write (?) ch #1250 CALL0 ch #1251 CALL1 0x6922 skip flag (bitmap, 1056 bits) (ch #0~1049) 0x69a6 pskip flag (bitmap, 1056 bits) (ch #0~1049) bit position = byte[(ch# / 8)] & (1 << (ch# % 8)) skip pskip 0 0 off 1 0 skip 1 1 pskip 0 1 unknown 0x6b1e memory bank settings {uint8_t bank_group (0x00~0x11, 0xff: unused) uint8_t bank_index (0x00~0x63) } x 1050 channels 0x7352 bank name {char bank_name[6]} x 18 entries *** channel entry 21bytes/channel, all values are little-endian. {uint32_t freq uint32_t offset uint16_t train_sql uint16_t tone_setting uint16_t dtcs_mode uint8_t dtcs_polarity uint8_t name[6]} freq and offset: Values are specified in 1/3Hz. i.e. 3000000(0x002dc6c0) means 1.0MHz. freq range is 0.495~999.99MHz and offset is 0~159.995MHz. train_sql: bit[15:14] 00 Train SQL: off 01 Train SQL: tone eliminate (use bit[8:0]) 10 Train SQL: MSK bit[13:11] 000 no tone 001 Tone enable 010 TSQL enable 100 DTCS enable bit[10:9] 00 duplex: off 01 duplex: on (-) 10 duplex: on (+) bit[8:0] Train SQL tone frequency (300~3000Hz) the value is specified in 10Hz. For example: 228(0xe4) means 2280Hz. - In Japan, train radio sends simple tone or MSK signal when no conversation. Train SQL suppress these tone/signal to listen easy. tone_setting: bit[15:12] 0000 TS: 5.0kHz 0001 TS: 6.25kHz 0010 TS: 8.33kHz 0011 TS: 9.0kHz 0100 TS: 10.0kHz 0101 TS: 12.5kHz 0110 TS: 15.0kHz 0111 TS: 20.0kHz 1000 TS: 25.0kHz 1001 TS: 30.0kHz 1010 TS: 50.0kHz 1011 TS: 100.0kHz 1100 TS: 200.0kHz 1101 TS: Auto bit[11:6] 000000 TSQL tone: 67.0Hz 000001 TSQL tone: 69.3Hz 000010 TSQL tone: 71.9Hz : 101111 TSQL tone: 241.8Hz 110000 TSQL tone: 250.3Hz 110001 TSQL tone: 254.1Hz bit[5:0] CTCSS tone, format is same as TSQL tone dtcs_mode: bit[15:9] unknown, '0000000' bit[8:7] 00 mode: FM 01 mode: WFM 10 mode: AM 11 mode: Auto bit[6:0] 000000 DTCS code: 023 000001 DTCS code: 025 000010 DTCS code: 026 : 110101 DTCS code: 734 110110 DTCS code: 743 110111 DTCS code: 754 dtcs_polarity: bit[7:2] unknown, '111111' bit[1:0] 00 DTCS polarity: Both-N 01 DTCS polarity: TN-RR 10 DTCS polarity: TR-RN 11 DTCS polarity: Both-R - When channel entry is empty, these values are set: freq 0x3a98 (499.5kHz) offset 0x1c9bfd68 (159.995MHz) train_sql 0xffff tone_setting 0xffff dtcs_mode 0x03ff dtcs_polarity 0xff name {0x20, 0x20, 0x20, 0x20, 0x20, 0x20} skip and pskip "11" - - - - - - - - .ICF contains current rig status such as VFO frequency, power (Lo/Hi), beep volume and so on, but I don't check yet because these are not fundamental. And some stuff: _model = "\x28\x69\x00\x01" The first line of .ICF and CHIRP's message says "ERROR: Unknown radio type 28690001" same code. _memsize = 0x7500 _endframe = "Icom Inc\x2e\x41\x38" What does \x41\x38 means? Is there any reason not to simply use "Icom Inc." ?? Regards, -- SASANO Takayoshi (JG1UAA) <uaa(a)mx5.nisiq.net>

1 0