Developers
Threads by month
- ----- 2025 -----
- May
- April
- March
- February
- January
- ----- 2024 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2023 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2022 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2021 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2020 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2019 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2018 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2017 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2016 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2015 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2014 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2013 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2012 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- February
- January
- ----- 2011 -----
- December
- November
- October
- September
- August
- July
- June
- May
- April
- March
- 3 participants
- 2972 discussions
Tested changes:
Changes for Build #881
[Dan Smith <dsmith(a)danplanet.com>] [uv5r] Remove experimental designation
This driver is one of the most feature-complete and well-tested
of all in the chirp tree. It's been marked as experimental for years,
and I think it's safe to remove that designation at this point.
Closes #8099
[Dan Smith <dsmith(a)danplanet.com>] Add TIDRADIO TD-H6 and TD-UV5R
Closes #8097
[Tom Hayward <tom(a)tomh.us>] [id880] Fix typo in charset definition. #281
[Tom Hayward <tom(a)tomh.us>] [thf6a] Support full charset (ASCII). Fixes #141
[Tom Hayward <tom(a)tomh.us>] [id880] Support full charset. Fixes #281
[Tom Hayward <tom(a)tomh.us>] [vx5] Support full charset (ASCII). Fixes #292
[Tom Hayward <tom(a)tomh.us>] [id31a] set used bit when creating new memory, clear when deleting. Fixes #269
[Tom Hayward <tom(a)tomh.us>] Support PyGTK < 2.22 in bank edit. Fixes #231
[Tom Hayward <tom(a)tomh.us>] [d710] [v71] [d72] Fix tone list (not all tones are supported). Fixes #212
[Dan Smith <dsmith(a)danplanet.com>] [vx7] Fix setting memory power levels on 220MHz band
Fixes #214
[Dan Smith <dsmith(a)danplanet.com>] fips: Pennsylvania FIPS code was wrong. #117
[Marco Filippi <iz3gme.marco(a)gmail.com>] Consider lower bound frequency of each valid_band as valid
Fix bug #181
[Tom Hayward <tom(a)tomh.us>] tmd700: allow 8-char names. Fixes #176
[Dan Smith <dsmith(a)danplanet.com>] Fix the "blind deletion" problem, as well as properly direct copy/paste
Fixes #172
[David Griffith <dave(a)661.org>] Bug #155 fix: VX-7 1.25m power levels
[David Griffith <dave(a)661.org>] New INSTALL and README files
Fixes #122
[Tom Hayward <tom(a)tomh.us>] thd72: only use hardware flow on OS X. Fixes #166
[Marco Filippi <iz3gme.marco(a)gmail.com>] [FT817] Tone freq not set correctly
Same as #88 for FT857, to avoid code duplication fix code have been moved from
ft857 to its ancestor class
Fix bug #163
[Tom Hayward <tom(a)tomh.us>] Fix Mac .app so paths with spaces work. Fixes Bug #145
Full log:
[...truncated 672 lines...]
test_copy_all (tests.TestCase_IcomIC2820H)
Testing Icom IC-2820H copy all ... ok
test_detect (tests.TestCase_IcomIC2820H)
Testing Icom IC-2820H detect ... ok
test_edges (tests.TestCase_IcomIC2820H)
Testing Icom IC-2820H edges ... ok
test_settings (tests.TestCase_IcomIC2820H)
Testing Icom IC-2820H settings ... ok
test_banks (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 brute force ... ok
test_clone (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 clone ... ok
test_copy_all (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 copy all ... ok
test_detect (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 detect ... ok
test_edges (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 edges ... ok
test_settings (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P brute force ... ok
test_clone (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P clone ... ok
test_copy_all (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P copy all ... ok
test_detect (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P detect ... ok
test_edges (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P edges ... ok
test_settings (tests.TestCase_WouxunKGUVD1P)
Testing Wouxun KG-UVD1P settings ... ok
test_banks (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 brute force ... ok
test_clone (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 clone ... ok
test_copy_all (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 copy all ... ok
test_detect (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 detect ... ok
test_edges (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 edges ... ok
test_settings (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 settings ... ok
test_banks (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV brute force ... ok
test_clone (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV clone ... ok
test_copy_all (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV copy all ... ok
test_detect (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV detect ... ok
test_edges (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV edges ... ok
test_settings (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV settings ... ok
test_banks (tests.TestCase_JetstreamJT270MH)
Testing Jetstream JT270MH banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_JetstreamJT270MH)
Testing Jetstream JT270MH brute force ... ok
test_clone (tests.TestCase_JetstreamJT270MH)
Testing Jetstream JT270MH clone ... ok
test_copy_all (tests.TestCase_JetstreamJT270MH)
Testing Jetstream JT270MH copy all ... ok
test_detect (tests.TestCase_JetstreamJT270MH)
Testing Jetstream JT270MH detect ... ok
test_edges (tests.TestCase_JetstreamJT270MH)
Testing Jetstream JT270MH edges ... ok
test_settings (tests.TestCase_JetstreamJT270MH)
Testing Jetstream JT270MH settings ... ok
test_banks (tests.TestCase_BaofengUV3R)
Testing Baofeng UV-3R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengUV3R)
Testing Baofeng UV-3R brute force ... ok
test_clone (tests.TestCase_BaofengUV3R)
Testing Baofeng UV-3R clone ... ok
test_copy_all (tests.TestCase_BaofengUV3R)
Testing Baofeng UV-3R copy all ... ok
test_detect (tests.TestCase_BaofengUV3R)
Testing Baofeng UV-3R detect ... ok
test_edges (tests.TestCase_BaofengUV3R)
Testing Baofeng UV-3R edges ... ok
test_settings (tests.TestCase_BaofengUV3R)
Testing Baofeng UV-3R settings ... ok
test_banks (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 banks ... ok
test_brute_force (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 brute force ... ok
test_clone (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 clone ... ok
test_copy_all (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 copy all ... ok
test_detect (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 detect ... ok
test_edges (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 edges ... ok
test_settings (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 settings ... ok
test_banks (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M brute force ... ok
test_clone (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M clone ... ok
test_copy_all (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M copy all ... ok
test_detect (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M detect ... ok
test_edges (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M edges ... ok
test_settings (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M settings ... ok
test_banks (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M brute force ... ok
test_clone (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M clone ... ok
test_copy_all (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M copy all ... ok
test_detect (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M detect ... ok
test_edges (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M edges ... ok
test_settings (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_AnyTone778UV)
Testing AnyTone 778UV banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_AnyTone778UV)
Testing AnyTone 778UV brute force ... ok
test_clone (tests.TestCase_AnyTone778UV)
Testing AnyTone 778UV clone ... ok
test_copy_all (tests.TestCase_AnyTone778UV)
Testing AnyTone 778UV copy all ... ok
test_detect (tests.TestCase_AnyTone778UV)
Testing AnyTone 778UV detect ... ok
test_edges (tests.TestCase_AnyTone778UV)
Testing AnyTone 778UV edges ... ok
test_settings (tests.TestCase_AnyTone778UV)
Testing AnyTone 778UV settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 brute force ... ok
test_clone (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 clone ... ok
test_copy_all (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 copy all ... ok
test_detect (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 detect ... ok
test_edges (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 edges ... ok
test_settings (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 settings ... ok
test_banks (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 brute force ... ok
test_clone (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 clone ... ok
test_copy_all (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 copy all ... ok
test_detect (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 detect ... ok
test_edges (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 edges ... ok
test_settings (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_KYDIP620)
Testing KYD IP-620 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KYDIP620)
Testing KYD IP-620 brute force ... ok
test_clone (tests.TestCase_KYDIP620)
Testing KYD IP-620 clone ... ok
test_copy_all (tests.TestCase_KYDIP620)
Testing KYD IP-620 copy all ... ok
test_detect (tests.TestCase_KYDIP620)
Testing KYD IP-620 detect ... ok
test_edges (tests.TestCase_KYDIP620)
Testing KYD IP-620 edges ... ok
test_settings (tests.TestCase_KYDIP620)
Testing KYD IP-620 settings ... ok
test_banks (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M brute force ... ok
test_clone (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M clone ... ok
test_copy_all (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M copy all ... ok
test_detect (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M detect ... ok
test_edges (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M edges ... ok
test_settings (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 banks ... ok
test_brute_force (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 brute force ... ok
test_clone (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 clone ... ok
test_copy_all (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 copy all ... ok
test_detect (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 detect ... ok
test_edges (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 edges ... ok
test_settings (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R brute force ... ok
test_clone (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R clone ... ok
test_copy_all (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R copy all ... ok
test_detect (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R detect ... ok
test_edges (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R edges ... ok
test_settings (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 brute force ... ok
test_clone (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 clone ... ok
test_copy_all (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 copy all ... ok
test_detect (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 detect ... ok
test_edges (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 edges ... ok
test_settings (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 settings ... ok
test_banks (tests.TestCase_IcomICP7)
Testing Icom IC-P7 banks ... ok
test_brute_force (tests.TestCase_IcomICP7)
Testing Icom IC-P7 brute force ... ok
test_clone (tests.TestCase_IcomICP7)
Testing Icom IC-P7 clone ... ok
test_copy_all (tests.TestCase_IcomICP7)
Testing Icom IC-P7 copy all ... ok
test_detect (tests.TestCase_IcomICP7)
Testing Icom IC-P7 detect ... ok
test_edges (tests.TestCase_IcomICP7)
Testing Icom IC-P7 edges ... ok
test_settings (tests.TestCase_IcomICP7)
Testing Icom IC-P7 settings ... ok
test_banks (tests.TestCase_AnyToneOBLTR8R)
Testing AnyTone OBLTR-8R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_AnyToneOBLTR8R)
Testing AnyTone OBLTR-8R brute force ... ok
test_clone (tests.TestCase_AnyToneOBLTR8R)
Testing AnyTone OBLTR-8R clone ... ok
test_copy_all (tests.TestCase_AnyToneOBLTR8R)
Testing AnyTone OBLTR-8R copy all ... ok
test_detect (tests.TestCase_AnyToneOBLTR8R)
Testing AnyTone OBLTR-8R detect ... ok
test_edges (tests.TestCase_AnyToneOBLTR8R)
Testing AnyTone OBLTR-8R edges ... ok
test_settings (tests.TestCase_AnyToneOBLTR8R)
Testing AnyTone OBLTR-8R settings ... ok
test_banks (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R brute force ... ok
test_clone (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R clone ... ok
test_copy_all (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R copy all ... ok
test_detect (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R detect ... ok
test_edges (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R edges ... ok
test_settings (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R brute force ... ok
test_clone (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R clone ... ok
test_copy_all (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R copy all ... ok
test_detect (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R detect ... ok
test_edges (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R edges ... ok
test_settings (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R settings ... ok
test_banks (tests.TestCase_KYDNC630A)
Testing KYD NC-630A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KYDNC630A)
Testing KYD NC-630A brute force ... ok
test_clone (tests.TestCase_KYDNC630A)
Testing KYD NC-630A clone ... ok
test_copy_all (tests.TestCase_KYDNC630A)
Testing KYD NC-630A copy all ... ok
test_detect (tests.TestCase_KYDNC630A)
Testing KYD NC-630A detect ... ok
test_edges (tests.TestCase_KYDNC630A)
Testing KYD NC-630A edges ... ok
test_settings (tests.TestCase_KYDNC630A)
Testing KYD NC-630A settings ... ok
test_banks (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D banks ... ok
test_brute_force (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D brute force ... ok
test_clone (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D clone ... ok
test_copy_all (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D copy all ... ok
test_detect (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D detect ... ok
test_edges (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D edges ... ok
test_settings (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D settings ... ok
test_banks (tests.TestCase_PuxingPX777)
Testing Puxing PX-777 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_PuxingPX777)
Testing Puxing PX-777 brute force ... ok
test_clone (tests.TestCase_PuxingPX777)
Testing Puxing PX-777 clone ... ok
test_copy_all (tests.TestCase_PuxingPX777)
Testing Puxing PX-777 copy all ... ok
test_detect (tests.TestCase_PuxingPX777)
Testing Puxing PX-777 detect ... ok
test_edges (tests.TestCase_PuxingPX777)
Testing Puxing PX-777 edges ... ok
test_settings (tests.TestCase_PuxingPX777)
Testing Puxing PX-777 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND brute force ... ok
test_clone (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND clone ... ok
test_copy_all (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND copy all ... ok
test_detect (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND detect ... ok
test_edges (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND edges ... ok
test_settings (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND settings ... ok
test_banks (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR banks ... ok
test_brute_force (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR brute force ... ok
test_clone (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR clone ... ok
test_copy_all (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR copy all ... ok
test_detect (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR detect ... ok
test_edges (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR edges ... ok
test_settings (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR settings ... ok
test_banks (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) brute force ... ok
test_clone (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) clone ... ok
test_copy_all (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) copy all ... ok
test_detect (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) detect ... ok
test_edges (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) edges ... ok
test_settings (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) settings ... ok
test_banks (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R brute force ... ok
test_clone (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R clone ... ok
test_copy_all (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R copy all ... ok
test_detect (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R detect ... ok
test_edges (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R edges ... ok
test_settings (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R settings ... ok
test_banks (tests.TestCase_IcomICQ7A)
Testing Icom IC-Q7A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_IcomICQ7A)
Testing Icom IC-Q7A brute force ... ok
test_clone (tests.TestCase_IcomICQ7A)
Testing Icom IC-Q7A clone ... ok
test_copy_all (tests.TestCase_IcomICQ7A)
Testing Icom IC-Q7A copy all ... ok
test_detect (tests.TestCase_IcomICQ7A)
Testing Icom IC-Q7A detect ... ok
test_edges (tests.TestCase_IcomICQ7A)
Testing Icom IC-Q7A edges ... ok
test_settings (tests.TestCase_IcomICQ7A)
Testing Icom IC-Q7A settings ... ok
test_banks (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R banks ... ok
test_brute_force (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R brute force ... ok
test_clone (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R clone ... ok
test_copy_all (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R copy all ... ok
test_detect (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R detect ... ok
test_edges (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R edges ... ok
test_settings (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R settings ... ok
test_banks (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 brute force ... ok
test_clone (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 clone ... ok
test_copy_all (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 copy all ... ok
test_detect (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 detect ... ok
test_edges (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 edges ... ok
test_settings (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 settings ... ok
test_banks (tests.TestCase_AnyToneTERMN8R)
Testing AnyTone TERMN-8R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_AnyToneTERMN8R)
Testing AnyTone TERMN-8R brute force ... ok
test_clone (tests.TestCase_AnyToneTERMN8R)
Testing AnyTone TERMN-8R clone ... ok
test_copy_all (tests.TestCase_AnyToneTERMN8R)
Testing AnyTone TERMN-8R copy all ... ok
test_detect (tests.TestCase_AnyToneTERMN8R)
Testing AnyTone TERMN-8R detect ... ok
test_edges (tests.TestCase_AnyToneTERMN8R)
Testing AnyTone TERMN-8R edges ... ok
test_settings (tests.TestCase_AnyToneTERMN8R)
Testing AnyTone TERMN-8R settings ... ok
test_banks (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) brute force ... ok
test_clone (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) clone ... ok
test_copy_all (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) copy all ... ok
test_detect (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) detect ... ok
test_edges (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) edges ... ok
test_settings (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) settings ... ok
test_banks (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE banks ... ok
test_brute_force (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE brute force ... ok
test_clone (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE clone ... ok
test_copy_all (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE copy all ... ok
test_detect (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE detect ... ok
test_edges (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE edges ... ok
test_settings (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE settings ... ok
test_banks (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K brute force ... ok
test_clone (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K clone ... ok
test_copy_all (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K copy all ... ok
test_detect (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K detect ... ok
test_edges (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K edges ... ok
test_settings (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K settings ... ok
test_banks (tests.TestCase_IcomICT70)
Testing Icom IC-T70 banks ... ok
test_brute_force (tests.TestCase_IcomICT70)
Testing Icom IC-T70 brute force ... ok
test_clone (tests.TestCase_IcomICT70)
Testing Icom IC-T70 clone ... ok
test_copy_all (tests.TestCase_IcomICT70)
Testing Icom IC-T70 copy all ... ok
test_detect (tests.TestCase_IcomICT70)
Testing Icom IC-T70 detect ... ok
test_edges (tests.TestCase_IcomICT70)
Testing Icom IC-T70 edges ... ok
test_settings (tests.TestCase_IcomICT70)
Testing Icom IC-T70 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 brute force ... ok
test_clone (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 clone ... ok
test_copy_all (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 copy all ... ok
test_detect (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 detect ... ok
test_edges (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 edges ... ok
test_settings (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 settings ... ok
test_banks (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 brute force ... ok
test_clone (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 clone ... ok
test_copy_all (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 copy all ... ok
test_detect (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 detect ... ok
test_edges (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 edges ... ok
test_settings (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 settings ... ok
test_banks (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 brute force ... ok
test_clone (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 clone ... ok
test_copy_all (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 copy all ... ok
test_detect (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 detect ... ok
test_edges (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 edges ... ok
test_settings (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 settings ... ok
test_banks (tests.TestCase_TYTTH9000144)
Testing TYT TH9000_144 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTH9000144)
Testing TYT TH9000_144 brute force ... ok
test_clone (tests.TestCase_TYTTH9000144)
Testing TYT TH9000_144 clone ... ok
test_copy_all (tests.TestCase_TYTTH9000144)
Testing TYT TH9000_144 copy all ... ok
test_detect (tests.TestCase_TYTTH9000144)
Testing TYT TH9000_144 detect ... ok
test_edges (tests.TestCase_TYTTH9000144)
Testing TYT TH9000_144 edges ... ok
test_settings (tests.TestCase_TYTTH9000144)
Testing TYT TH9000_144 settings ... ok
test_banks (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) brute force ... ok
test_clone (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) clone ... ok
test_copy_all (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) copy all ... ok
test_detect (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) detect ... ok
test_edges (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) edges ... ok
test_settings (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) settings ... ok
test_banks (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 brute force ... ok
test_clone (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 clone ... ok
test_copy_all (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 copy all ... ok
test_detect (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 detect ... ok
test_edges (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 edges ... ok
test_settings (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 brute force ... ok
test_clone (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 clone ... ok
test_copy_all (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 copy all ... ok
test_detect (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 detect ... ok
test_edges (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 edges ... ok
test_settings (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 settings ... ok
test_banks (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G banks ... ok
test_brute_force (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G brute force ... ok
test_clone (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G clone ... ok
test_copy_all (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G copy all ... ok
test_detect (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G detect ... ok
test_edges (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G edges ... ok
test_settings (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G settings ... ok
test_banks (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M brute force ... ok
test_clone (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M clone ... ok
test_copy_all (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M copy all ... ok
test_detect (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M detect ... ok
test_edges (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M edges ... ok
test_settings (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 brute force ... ok
test_clone (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 clone ... ok
test_copy_all (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 copy all ... ok
test_detect (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 detect ... ok
test_edges (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 edges ... ok
test_settings (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 settings ... ok
test_banks (tests.TestCase_IcomICT7H)
Testing Icom IC-T7H banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_IcomICT7H)
Testing Icom IC-T7H brute force ... ok
test_clone (tests.TestCase_IcomICT7H)
Testing Icom IC-T7H clone ... ok
test_copy_all (tests.TestCase_IcomICT7H)
Testing Icom IC-T7H copy all ... ok
test_detect (tests.TestCase_IcomICT7H)
Testing Icom IC-T7H detect ... ok
test_edges (tests.TestCase_IcomICT7H)
Testing Icom IC-T7H edges ... ok
test_settings (tests.TestCase_IcomICT7H)
Testing Icom IC-T7H settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 brute force ... ok
test_clone (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 clone ... ok
test_copy_all (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 copy all ... ok
test_detect (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 detect ... ok
test_edges (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 edges ... ok
test_settings (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 settings ... ok
test_banks (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G banks ... ok
test_brute_force (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G brute force ... ok
test_clone (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G clone ... ok
test_copy_all (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G copy all ... ok
test_detect (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G detect ... ok
test_edges (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G edges ... ok
test_settings (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G settings ... ok
test_banks (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D brute force ... ok
test_clone (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D clone ... ok
test_copy_all (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D copy all ... ok
test_detect (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D detect ... ok
test_edges (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D edges ... ok
test_settings (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D settings ... ok
test_banks (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 banks ... ok
test_brute_force (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 brute force ... ok
test_clone (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 clone ... ok
test_copy_all (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 copy all ... ok
test_detect (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 detect ... ok
test_edges (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 edges ... ok
test_settings (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R banks ... ok
test_brute_force (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R brute force ... ok
test_clone (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R clone ... ok
test_copy_all (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R copy all ... ok
test_detect (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R detect ... ok
test_edges (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R edges ... ok
test_settings (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R settings ... ok
test_banks (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 brute force ... ok
test_clone (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 clone ... ok
test_copy_all (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 copy all ... ok
test_detect (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 detect ... ok
test_edges (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 edges ... ok
test_settings (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 settings ... ok
test_banks (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 brute force ... ok
test_clone (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 clone ... ok
test_copy_all (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 copy all ... ok
test_detect (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 detect ... ok
test_edges (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 edges ... ok
test_settings (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R banks ... ok
test_brute_force (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R brute force ... ok
test_clone (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R clone ... ok
test_copy_all (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R copy all ... ok
test_detect (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R detect ... ok
test_edges (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R edges ... ok
test_settings (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R settings ... ok
test_banks (tests.TestCase_IcomICT8A)
Testing Icom IC-T8A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_IcomICT8A)
Testing Icom IC-T8A brute force ... ok
test_clone (tests.TestCase_IcomICT8A)
Testing Icom IC-T8A clone ... ok
test_copy_all (tests.TestCase_IcomICT8A)
Testing Icom IC-T8A copy all ... ok
test_detect (tests.TestCase_IcomICT8A)
Testing Icom IC-T8A detect ... ok
test_edges (tests.TestCase_IcomICT8A)
Testing Icom IC-T8A edges ... ok
test_settings (tests.TestCase_IcomICT8A)
Testing Icom IC-T8A settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 brute force ... ok
test_clone (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 clone ... ok
test_copy_all (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 copy all ... ok
test_detect (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 detect ... ok
test_edges (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 edges ... ok
test_settings (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 settings ... ok
test_banks (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D brute force ... ok
test_clone (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D clone ... ok
test_copy_all (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D copy all ... ok
test_detect (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D detect ... ok
test_edges (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D edges ... ok
test_settings (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D settings ... ok
test_banks (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 brute force ... ok
test_clone (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 clone ... ok
test_copy_all (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 copy all ... ok
test_detect (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 detect ... ok
test_edges (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 edges ... ok
test_settings (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D brute force ... ok
test_clone (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D clone ... ok
test_copy_all (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D copy all ... ok
test_detect (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D detect ... ok
test_edges (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D edges ... ok
test_settings (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D settings ... ok
test_banks (tests.TestCase_YaesuFT4VR)
Testing Yaesu FT-4VR banks ... ok
test_brute_force (tests.TestCase_YaesuFT4VR)
Testing Yaesu FT-4VR brute force ... ok
test_clone (tests.TestCase_YaesuFT4VR)
Testing Yaesu FT-4VR clone ... ok
test_copy_all (tests.TestCase_YaesuFT4VR)
Testing Yaesu FT-4VR copy all ... ok
test_detect (tests.TestCase_YaesuFT4VR)
Testing Yaesu FT-4VR detect ... ok
test_edges (tests.TestCase_YaesuFT4VR)
Testing Yaesu FT-4VR edges ... ok
test_settings (tests.TestCase_YaesuFT4VR)
Testing Yaesu FT-4VR settings ... ok
test_banks (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 brute force ... ok
test_clone (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 clone ... ok
test_copy_all (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 copy all ... ok
test_detect (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 detect ... ok
test_edges (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 edges ... ok
test_settings (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 settings ... ok
test_banks (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 brute force ... ok
test_clone (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 clone ... ok
test_copy_all (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 copy all ... ok
test_detect (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 detect ... ok
test_edges (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 edges ... ok
test_settings (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 settings ... ok
test_banks (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus brute force ... ok
test_clone (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus clone ... ok
test_copy_all (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus copy all ... ok
test_detect (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus detect ... ok
test_edges (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus edges ... ok
test_settings (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus settings ... ok
test_banks (tests.TestCase_IcomICV82U82)
Testing Icom IC-V82/U82 banks ... ok
test_brute_force (tests.TestCase_IcomICV82U82)
Testing Icom IC-V82/U82 brute force ... ok
test_clone (tests.TestCase_IcomICV82U82)
Testing Icom IC-V82/U82 clone ... ok
test_copy_all (tests.TestCase_IcomICV82U82)
Testing Icom IC-V82/U82 copy all ... ok
test_detect (tests.TestCase_IcomICV82U82)
Testing Icom IC-V82/U82 detect ... ok
test_edges (tests.TestCase_IcomICV82U82)
Testing Icom IC-V82/U82 edges ... ok
test_settings (tests.TestCase_IcomICV82U82)
Testing Icom IC-V82/U82 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV brute force ... ok
test_clone (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV clone ... ok
test_copy_all (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV copy all ... ok
test_detect (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV detect ... ok
test_edges (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV edges ... ok
test_settings (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 brute force ... ok
test_clone (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 clone ... ok
test_copy_all (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 copy all ... ok
test_detect (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 detect ... ok
test_edges (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 settings ... ok
test_banks (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 brute force ... ok
test_clone (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 clone ... ok
test_copy_all (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 copy all ... ok
test_detect (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 detect ... ok
test_edges (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 edges ... ok
test_settings (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 settings ... ok
test_banks (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 brute force ... ok
test_clone (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 clone ... ok
test_copy_all (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 copy all ... ok
test_detect (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 detect ... ok
test_edges (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 edges ... ok
test_settings (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 settings ... ok
test_banks (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D banks ... ok
test_brute_force (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D brute force ... ok
test_clone (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D clone ... ok
test_copy_all (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D copy all ... ok
test_detect (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D detect ... ok
test_edges (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D edges ... ok
test_settings (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D settings ... ok
test_banks (tests.TestCase_RadioddityR2)
Testing Radioddity R2 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RadioddityR2)
Testing Radioddity R2 brute force ... ok
test_clone (tests.TestCase_RadioddityR2)
Testing Radioddity R2 clone ... ok
test_copy_all (tests.TestCase_RadioddityR2)
Testing Radioddity R2 copy all ... ok
test_detect (tests.TestCase_RadioddityR2)
Testing Radioddity R2 detect ... ok
test_edges (tests.TestCase_RadioddityR2)
Testing Radioddity R2 edges ... ok
test_settings (tests.TestCase_RadioddityR2)
Testing Radioddity R2 settings ... ok
test_banks (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 brute force ... ok
test_clone (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 clone ... ok
test_copy_all (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 copy all ... ok
test_detect (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 detect ... ok
test_edges (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 edges ... ok
test_settings (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 settings ... ok
test_banks (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A brute force ... ok
test_clone (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A clone ... ok
test_copy_all (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A copy all ... ok
test_detect (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A detect ... ok
test_edges (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A edges ... ok
test_settings (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT4XE)
Testing Yaesu FT-4XE banks ... ok
test_brute_force (tests.TestCase_YaesuFT4XE)
Testing Yaesu FT-4XE brute force ... ok
test_clone (tests.TestCase_YaesuFT4XE)
Testing Yaesu FT-4XE clone ... ok
test_copy_all (tests.TestCase_YaesuFT4XE)
Testing Yaesu FT-4XE copy all ... ok
test_detect (tests.TestCase_YaesuFT4XE)
Testing Yaesu FT-4XE detect ... ok
test_edges (tests.TestCase_YaesuFT4XE)
Testing Yaesu FT-4XE edges ... ok
test_settings (tests.TestCase_YaesuFT4XE)
Testing Yaesu FT-4XE settings ... ok
test_banks (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 brute force ... ok
test_clone (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 clone ... ok
test_copy_all (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 copy all ... ok
test_detect (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 detect ... ok
test_edges (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 edges ... ok
test_settings (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 settings ... ok
test_banks (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 brute force ... ok
test_clone (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 copy all ... ok
test_detect (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 detect ... ok
test_edges (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 edges ... ok
test_settings (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 settings ... ok
test_banks (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode brute force ... ok
test_clone (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode clone ... ok
test_copy_all (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode copy all ... ok
test_detect (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode detect ... ok
test_edges (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode edges ... ok
test_settings (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode settings ... ok
test_banks (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A brute force ... ok
test_clone (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A clone ... ok
test_copy_all (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A copy all ... ok
test_detect (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A detect ... ok
test_edges (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A edges ... ok
test_settings (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A settings ... ok
test_banks (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D banks ... ok
test_brute_force (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D brute force ... ok
test_clone (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D clone ... ok
test_copy_all (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D copy all ... ok
test_detect (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D detect ... ok
test_edges (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D edges ... ok
test_settings (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D settings ... ok
test_banks (tests.TestCase_RadtelT18)
Testing Radtel T18 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RadtelT18)
Testing Radtel T18 brute force ... ok
test_clone (tests.TestCase_RadtelT18)
Testing Radtel T18 clone ... ok
test_copy_all (tests.TestCase_RadtelT18)
Testing Radtel T18 copy all ... ok
test_detect (tests.TestCase_RadtelT18)
Testing Radtel T18 detect ... ok
test_edges (tests.TestCase_RadtelT18)
Testing Radtel T18 edges ... ok
test_settings (tests.TestCase_RadtelT18)
Testing Radtel T18 settings ... ok
test_banks (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR banks ... ok
test_brute_force (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR brute force ... ok
test_clone (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR clone ... ok
test_copy_all (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR copy all ... ok
test_detect (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR detect ... ok
test_edges (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR edges ... ok
test_settings (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR settings ... ok
test_banks (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E brute force ... ok
test_clone (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E clone ... ok
test_copy_all (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E copy all ... ok
test_detect (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E detect ... ok
test_edges (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E edges ... ok
test_settings (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B brute force ... ok
test_clone (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B clone ... ok
test_copy_all (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B copy all ... ok
test_detect (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B detect ... ok
test_edges (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B edges ... ok
test_settings (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B settings ... ok
test_banks (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode brute force ... ok
test_clone (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode clone ... ok
test_copy_all (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode copy all ... ok
test_detect (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode detect ... ok
test_edges (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode edges ... ok
test_settings (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode settings ... ok
test_banks (tests.TestCase_RetevisRT21)
Testing Retevis RT21 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT21)
Testing Retevis RT21 brute force ... ok
test_clone (tests.TestCase_RetevisRT21)
Testing Retevis RT21 clone ... ok
test_copy_all (tests.TestCase_RetevisRT21)
Testing Retevis RT21 copy all ... ok
test_detect (tests.TestCase_RetevisRT21)
Testing Retevis RT21 detect ... ok
test_edges (tests.TestCase_RetevisRT21)
Testing Retevis RT21 edges ... ok
test_settings (tests.TestCase_RetevisRT21)
Testing Retevis RT21 settings ... ok
test_banks (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode brute force ... ok
test_clone (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode clone ... ok
test_copy_all (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode copy all ... ok
test_detect (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode detect ... ok
test_edges (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode edges ... ok
test_settings (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode settings ... ok
test_banks (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode brute force ... ok
test_clone (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode clone ... ok
test_copy_all (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode copy all ... ok
test_detect (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode detect ... ok
test_edges (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode edges ... ok
test_settings (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode settings ... ok
test_banks (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 brute force ... ok
test_clone (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 clone ... ok
test_copy_all (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 copy all ... ok
test_detect (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 detect ... ok
test_edges (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 edges ... ok
test_settings (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 settings ... ok
test_banks (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D brute force ... ok
test_clone (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D copy all ... ok
test_detect (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D detect ... ok
test_edges (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D edges ... ok
test_settings (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D settings ... ok
test_banks (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B brute force ... ok
test_clone (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B clone ... ok
test_copy_all (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B copy all ... ok
test_detect (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B detect ... ok
test_edges (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B edges ... ok
test_settings (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B settings ... ok
test_banks (tests.TestCase_RetevisRT22)
Testing Retevis RT22 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT22)
Testing Retevis RT22 brute force ... ok
test_clone (tests.TestCase_RetevisRT22)
Testing Retevis RT22 clone ... ok
test_copy_all (tests.TestCase_RetevisRT22)
Testing Retevis RT22 copy all ... ok
test_detect (tests.TestCase_RetevisRT22)
Testing Retevis RT22 detect ... ok
test_edges (tests.TestCase_RetevisRT22)
Testing Retevis RT22 edges ... ok
test_settings (tests.TestCase_RetevisRT22)
Testing Retevis RT22 settings ... ok
test_banks (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 brute force ... ok
test_clone (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 clone ... ok
test_copy_all (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 copy all ... ok
test_detect (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 detect ... ok
test_edges (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 edges ... ok
test_settings (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 settings ... ok
test_banks (tests.TestCase_YaesuFT50)
Testing Yaesu FT-50 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT50)
Testing Yaesu FT-50 brute force ... ok
test_clone (tests.TestCase_YaesuFT50)
Testing Yaesu FT-50 clone ... ok
test_copy_all (tests.TestCase_YaesuFT50)
Testing Yaesu FT-50 copy all ... ok
test_detect (tests.TestCase_YaesuFT50)
Testing Yaesu FT-50 detect ... ok
test_edges (tests.TestCase_YaesuFT50)
Testing Yaesu FT-50 edges ... ok
test_settings (tests.TestCase_YaesuFT50)
Testing Yaesu FT-50 settings ... ok
test_banks (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV brute force ... ok
test_clone (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV clone ... ok
test_copy_all (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV copy all ... ok
test_detect (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV detect ... ok
test_edges (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV edges ... ok
test_settings (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV settings ... ok
test_banks (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D brute force ... ok
test_clone (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D clone ... ok
test_copy_all (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D copy all ... ok
test_detect (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D detect ... ok
test_edges (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D edges ... ok
test_settings (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_RetevisRT23)
Testing Retevis RT23 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT23)
Testing Retevis RT23 brute force ... ok
test_clone (tests.TestCase_RetevisRT23)
Testing Retevis RT23 clone ... ok
test_copy_all (tests.TestCase_RetevisRT23)
Testing Retevis RT23 copy all ... ok
test_detect (tests.TestCase_RetevisRT23)
Testing Retevis RT23 detect ... ok
test_edges (tests.TestCase_RetevisRT23)
Testing Retevis RT23 edges ... ok
test_settings (tests.TestCase_RetevisRT23)
Testing Retevis RT23 settings ... ok
test_banks (tests.TestCase_IcomIC208H)
Testing Icom IC-208H banks ... ok
test_brute_force (tests.TestCase_IcomIC208H)
Testing Icom IC-208H brute force ... ok
test_clone (tests.TestCase_IcomIC208H)
Testing Icom IC-208H clone ... ok
test_copy_all (tests.TestCase_IcomIC208H)
Testing Icom IC-208H copy all ... ok
test_detect (tests.TestCase_IcomIC208H)
Testing Icom IC-208H detect ... ok
test_edges (tests.TestCase_IcomIC208H)
Testing Icom IC-208H edges ... ok
test_settings (tests.TestCase_IcomIC208H)
Testing Icom IC-208H settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 brute force ... ok
test_clone (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 clone ... ok
test_copy_all (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 copy all ... ok
test_detect (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 detect ... ok
test_edges (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 edges ... ok
test_settings (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 settings ... ok
test_banks (tests.TestCase_IcomID31A)
Testing Icom ID-31A banks ... ok
test_brute_force (tests.TestCase_IcomID31A)
Testing Icom ID-31A brute force ... ok
test_clone (tests.TestCase_IcomID31A)
Testing Icom ID-31A clone ... ok
test_copy_all (tests.TestCase_IcomID31A)
Testing Icom ID-31A copy all ... ok
test_detect (tests.TestCase_IcomID31A)
Testing Icom ID-31A detect ... ok
test_edges (tests.TestCase_IcomID31A)
Testing Icom ID-31A edges ... ok
test_settings (tests.TestCase_IcomID31A)
Testing Icom ID-31A settings ... ok
test_banks (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 banks ... ok
test_brute_force (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 brute force ... ok
test_clone (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 clone ... ok
test_copy_all (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 copy all ... ok
test_detect (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 detect ... ok
test_edges (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 edges ... ok
test_settings (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 settings ... ok
test_banks (tests.TestCase_RetevisRT26)
Testing Retevis RT26 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT26)
Testing Retevis RT26 brute force ... ok
test_clone (tests.TestCase_RetevisRT26)
Testing Retevis RT26 clone ... ok
test_copy_all (tests.TestCase_RetevisRT26)
Testing Retevis RT26 copy all ... ok
test_detect (tests.TestCase_RetevisRT26)
Testing Retevis RT26 detect ... ok
test_edges (tests.TestCase_RetevisRT26)
Testing Retevis RT26 edges ... ok
test_settings (tests.TestCase_RetevisRT26)
Testing Retevis RT26 settings ... ok
test_banks (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H brute force ... ok
test_clone (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H clone ... ok
test_copy_all (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H copy all ... ok
test_detect (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H detect ... ok
test_edges (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H edges ... ok
test_settings (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 brute force ... ok
test_clone (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 clone ... ok
test_copy_all (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 copy all ... ok
test_detect (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 detect ... ok
test_edges (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 edges ... ok
test_settings (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_BTECHUV50X2)
Testing BTECH UV-50X2 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV50X2)
Testing BTECH UV-50X2 brute force ... ok
test_clone (tests.TestCase_BTECHUV50X2)
Testing BTECH UV-50X2 clone ... ok
test_copy_all (tests.TestCase_BTECHUV50X2)
Testing BTECH UV-50X2 copy all ... ok
test_detect (tests.TestCase_BTECHUV50X2)
Testing BTECH UV-50X2 detect ... ok
test_edges (tests.TestCase_BTECHUV50X2)
Testing BTECH UV-50X2 edges ... ok
test_settings (tests.TestCase_BTECHUV50X2)
Testing BTECH UV-50X2 settings ... ok
test_banks (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E banks ... ok
test_brute_force (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E brute force ... ok
test_clone (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E clone ... ok
test_copy_all (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E copy all ... ok
test_detect (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E detect ... ok
test_edges (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E edges ... ok
test_settings (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E settings ... ok
test_banks (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D brute force ... ok
test_clone (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D clone ... ok
test_copy_all (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D copy all ... ok
test_detect (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D detect ... ok
test_edges (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D edges ... ok
test_settings (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_BTECHUV50X3)
Testing BTECH UV-50X3 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV50X3)
Testing BTECH UV-50X3 brute force ... ok
test_clone (tests.TestCase_BTECHUV50X3)
Testing BTECH UV-50X3 clone ... ok
test_copy_all (tests.TestCase_BTECHUV50X3)
Testing BTECH UV-50X3 copy all ... ok
test_detect (tests.TestCase_BTECHUV50X3)
Testing BTECH UV-50X3 detect ... ok
test_edges (tests.TestCase_BTECHUV50X3)
Testing BTECH UV-50X3 edges ... ok
test_settings (tests.TestCase_BTECHUV50X3)
Testing BTECH UV-50X3 settings ... ok
test_banks (tests.TestCase_IcomID51)
Testing Icom ID-51 banks ... ok
test_brute_force (tests.TestCase_IcomID51)
Testing Icom ID-51 brute force ... ok
test_clone (tests.TestCase_IcomID51)
Testing Icom ID-51 clone ... ok
test_copy_all (tests.TestCase_IcomID51)
Testing Icom ID-51 copy all ... ok
test_detect (tests.TestCase_IcomID51)
Testing Icom ID-51 detect ... ok
test_edges (tests.TestCase_IcomID51)
Testing Icom ID-51 edges ... ok
test_settings (tests.TestCase_IcomID51)
Testing Icom ID-51 settings ... ok
test_banks (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus banks ... ok
test_brute_force (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus brute force ... ok
test_clone (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus clone ... ok
test_copy_all (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus copy all ... ok
test_detect (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus detect ... ok
test_edges (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus edges ... ok
test_settings (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus settings ... ok
test_banks (tests.TestCase_IcomID800H)
Testing Icom ID-800H banks ... ok
test_brute_force (tests.TestCase_IcomID800H)
Testing Icom ID-800H brute force ... ok
test_clone (tests.TestCase_IcomID800H)
Testing Icom ID-800H clone ... ok
test_copy_all (tests.TestCase_IcomID800H)
Testing Icom ID-800H copy all ... ok
test_detect (tests.TestCase_IcomID800H)
Testing Icom ID-800H detect ... ok
test_edges (tests.TestCase_IcomID800H)
Testing Icom ID-800H edges ... ok
test_settings (tests.TestCase_IcomID800H)
Testing Icom ID-800H settings ... ok
----------------------------------------------------------------------
Ran 1001 tests in 400.450s
OK (skipped=141)
struct memory {
bbcd rx_freq[4];
bbcd tx_freq[4];
lbcd rx_tone[2];
lbcd tx_tone[2];
u8 unknown10:5,
highpower:1,
unknown11:2;
u8 unknown20:4,
narrow:1,
unknown21:3;
u8 unknown31:1,
scanadd:1,
unknown32:6;
u8 unknown4;
};
struct name {
char name[7];
};
#seekto 0x0010;
struct memory channels[128];
#seekto 0x08C0;
struct name names[128];
#seekto 0x2020;
struct memory vfo1;
struct memory vfo2;
style create: /chirp/.tox/style
style installdeps: pep8==1.6.2, future
style inst: /chirp/.tox/.tmp/package/1/chirp-0.3.0dev.zip
style installed: DEPRECATION: Python 2.7 will reach the end of its life on January 1st, 2020. Please upgrade your Python as Python 2.7 won't be maintained after that date. A future version of pip will drop support for Python 2.7.,chirp==0.3.0.dev0,configparser==3.7.4,contextlib2==0.5.5,filelock==3.0.12,future==0.15.2,importlib-metadata==0.18,Mako==1.0.3,MarkupSafe==0.23,mercurial==3.7.3,packaging==19.0,pathlib2==2.3.4,pep8==1.6.2,pluggy==0.12.0,py==1.8.0,pygobject==3.20.0,pyparsing==2.4.0,pyserial==3.0.1,scandir==1.10.0,six==1.12.0,toml==0.10.0,tox==3.13.2,virtualenv==16.6.1,zipp==0.5.2
style run-test-pre: PYTHONHASHSEED='3199578634'
style run-test: commands[0] | python ./tools/cpep8.py
___________________________________ summary ____________________________________
unit: commands succeeded
driver: commands succeeded
style: commands succeeded
congratulations :)
Email was triggered for: Success
Sending email for trigger: Success
1
0
# HG changeset patch
# User Dan Smith <dsmith(a)danplanet.com>
# Date 1595040884 25200
# Fri Jul 17 19:54:44 2020 -0700
# Node ID 9a2ceec8004cb2085b1da5f5c5e5e268e918a9c4
# Parent 298a20ef0eb319b5c31e53a41bff1547baba7a19
[uv5r] Remove experimental designation
This driver is one of the most feature-complete and well-tested
of all in the chirp tree. It's been marked as experimental for years,
and I think it's safe to remove that designation at this point.
#0
diff -r 298a20ef0eb3 -r 9a2ceec8004c chirp/drivers/uv5r.py
--- a/chirp/drivers/uv5r.py Fri Jul 17 15:38:16 2020 -0700
+++ b/chirp/drivers/uv5r.py Fri Jul 17 19:54:44 2020 -0700
@@ -701,8 +701,7 @@
return False
-class BaofengUV5R(chirp_common.CloneModeRadio,
- chirp_common.ExperimentalRadio):
+class BaofengUV5R(chirp_common.CloneModeRadio):
"""Baofeng UV-5R"""
VENDOR = "Baofeng"
2
2
Tested changes:
Changes for Build #880
[Dan Smith <dsmith(a)danplanet.com>] Add Tenway UV-82 Pro alias
Closes #8095
[Martin Cooper <mfncooper(a)gmail.com>] Invert default return from _detect_23cm_unit
Fixes #8085
[Iain White <ig99ig(a)yahoo.com>] Change FTM7250D driver 'rf.valid.bands' to range of 108MHz to 580 MHz Fixes #8059
[Jim Unroe <rock.unroe(a)gmail.com>] [BF-A58S] baofeng_w970i.py driver update support for band limts
This patch updates the current tri-band radio model suppport to fully
implement the available band limit settings.
Related to these and similar Baofeng tri-band models:
BF-A58S
UV-82III
BF-UVF10
related to #8063
[Jim Unroe <rock.unroe(a)gmail.com>] [BF-A58S] baofeng_w970i.py driver cleanup
This patch cleans up the current tri-band radio model suppport in
preperation for fixing the band limit support in the following patch.
Related to these and similar Baofeng tri-band models:
BF-A58S
UV-82III
BF-UVF10
related to #8063
[Iain White <ig99ig(a)yahoo.com>] Add FTM7250D image file for testing: Yaesu_FTM-7250D_R.img Issue #6525
[Tom Hayward <tom(a)tomh.us>] [id880] Fix typo in charset definition. #281
[Tom Hayward <tom(a)tomh.us>] [thf6a] Support full charset (ASCII). Fixes #141
[Tom Hayward <tom(a)tomh.us>] [id880] Support full charset. Fixes #281
[Tom Hayward <tom(a)tomh.us>] [vx5] Support full charset (ASCII). Fixes #292
[Tom Hayward <tom(a)tomh.us>] [id31a] set used bit when creating new memory, clear when deleting. Fixes #269
[Tom Hayward <tom(a)tomh.us>] Support PyGTK < 2.22 in bank edit. Fixes #231
[Tom Hayward <tom(a)tomh.us>] [d710] [v71] [d72] Fix tone list (not all tones are supported). Fixes #212
[Dan Smith <dsmith(a)danplanet.com>] [vx7] Fix setting memory power levels on 220MHz band
Fixes #214
[Dan Smith <dsmith(a)danplanet.com>] fips: Pennsylvania FIPS code was wrong. #117
[Marco Filippi <iz3gme.marco(a)gmail.com>] Consider lower bound frequency of each valid_band as valid
Fix bug #181
[Tom Hayward <tom(a)tomh.us>] tmd700: allow 8-char names. Fixes #176
[Dan Smith <dsmith(a)danplanet.com>] Fix the "blind deletion" problem, as well as properly direct copy/paste
Fixes #172
[David Griffith <dave(a)661.org>] Bug #155 fix: VX-7 1.25m power levels
[David Griffith <dave(a)661.org>] New INSTALL and README files
Fixes #122
[Tom Hayward <tom(a)tomh.us>] thd72: only use hardware flow on OS X. Fixes #166
[Marco Filippi <iz3gme.marco(a)gmail.com>] [FT817] Tone freq not set correctly
Same as #88 for FT857, to avoid code duplication fix code have been moved from
ft857 to its ancestor class
Fix bug #163
[Tom Hayward <tom(a)tomh.us>] Fix Mac .app so paths with spaces work. Fixes Bug #145
Full log:
[...truncated 672 lines...]
test_copy_all (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 copy all ... ok
test_detect (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 detect ... ok
test_edges (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 edges ... ok
test_settings (tests.TestCase_RuggedRH5RV2)
Testing Rugged RH5R-V2 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D banks ... ok
test_brute_force (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D brute force ... ok
test_clone (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D clone ... ok
test_copy_all (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D copy all ... ok
test_detect (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D detect ... ok
test_edges (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D edges ... ok
test_settings (tests.TestCase_YaesuFT70D)
Testing Yaesu FT-70D settings ... ok
test_banks (tests.TestCase_AlincoDR235T)
Testing Alinco DR235T banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_AlincoDR235T)
Testing Alinco DR235T brute force ... ok
test_clone (tests.TestCase_AlincoDR235T)
Testing Alinco DR235T clone ... ok
test_copy_all (tests.TestCase_AlincoDR235T)
Testing Alinco DR235T copy all ... ok
test_detect (tests.TestCase_AlincoDR235T)
Testing Alinco DR235T detect ... ok
test_edges (tests.TestCase_AlincoDR235T)
Testing Alinco DR235T edges ... ok
test_settings (tests.TestCase_AlincoDR235T)
Testing Alinco DR235T settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M brute force ... ok
test_clone (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M clone ... ok
test_copy_all (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M copy all ... ok
test_detect (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M detect ... ok
test_edges (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M edges ... ok
test_settings (tests.TestCase_YaesuFT1500M)
Testing Yaesu FT-1500M settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A brute force ... ok
test_clone (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A clone ... ok
test_copy_all (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A copy all ... ok
test_detect (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A detect ... ok
test_edges (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A edges ... ok
test_settings (tests.TestCase_IcomICW32A)
Testing Icom IC-W32A settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A brute force ... ok
test_clone (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A clone ... ok
test_copy_all (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A copy all ... ok
test_detect (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A detect ... ok
test_edges (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A edges ... ok
test_settings (tests.TestCase_TDXoneTDQ8A)
Testing TDXone TD-Q8A settings ... ok
test_banks (tests.TestCase_BaofengBFT1)
Testing Baofeng BF-T1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengBFT1)
Testing Baofeng BF-T1 brute force ... ok
test_clone (tests.TestCase_BaofengBFT1)
Testing Baofeng BF-T1 clone ... ok
test_copy_all (tests.TestCase_BaofengBFT1)
Testing Baofeng BF-T1 copy all ... ok
test_detect (tests.TestCase_BaofengBFT1)
Testing Baofeng BF-T1 detect ... ok
test_edges (tests.TestCase_BaofengBFT1)
Testing Baofeng BF-T1 edges ... ok
test_settings (tests.TestCase_BaofengBFT1)
Testing Baofeng BF-T1 settings ... ok
test_banks (tests.TestCase_KYDIP620)
Testing KYD IP-620 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KYDIP620)
Testing KYD IP-620 brute force ... ok
test_clone (tests.TestCase_KYDIP620)
Testing KYD IP-620 clone ... ok
test_copy_all (tests.TestCase_KYDIP620)
Testing KYD IP-620 copy all ... ok
test_detect (tests.TestCase_KYDIP620)
Testing KYD IP-620 detect ... ok
test_edges (tests.TestCase_KYDIP620)
Testing KYD IP-620 edges ... ok
test_settings (tests.TestCase_KYDIP620)
Testing KYD IP-620 settings ... ok
test_banks (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV brute force ... ok
test_clone (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV clone ... ok
test_copy_all (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV copy all ... ok
test_detect (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV detect ... ok
test_edges (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV edges ... ok
test_settings (tests.TestCase_AnyTone5888UV)
Testing AnyTone 5888UV settings ... ok
test_banks (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 banks ... ok
test_brute_force (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 brute force ... ok
test_clone (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 clone ... ok
test_copy_all (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 copy all ... ok
test_detect (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 detect ... ok
test_edges (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 edges ... ok
test_settings (tests.TestCase_YaesuVX6)
Testing Yaesu VX-6 settings ... ok
test_banks (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 brute force ... ok
test_clone (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 clone ... ok
test_copy_all (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 copy all ... ok
test_detect (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 detect ... ok
test_edges (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 edges ... ok
test_settings (tests.TestCase_MidlandDBR2500)
Testing Midland DBR2500 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M brute force ... ok
test_clone (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M clone ... ok
test_copy_all (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M copy all ... ok
test_detect (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M detect ... ok
test_edges (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M edges ... ok
test_settings (tests.TestCase_YaesuFT7100M)
Testing Yaesu FT-7100M settings ... ok
test_banks (tests.TestCase_AnyTone778UV)
Testing AnyTone 778UV banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_AnyTone778UV)
Testing AnyTone 778UV brute force ... ok
test_clone (tests.TestCase_AnyTone778UV)
Testing AnyTone 778UV clone ... ok
test_copy_all (tests.TestCase_AnyTone778UV)
Testing AnyTone 778UV copy all ... ok
test_detect (tests.TestCase_AnyTone778UV)
Testing AnyTone 778UV detect ... ok
test_edges (tests.TestCase_AnyTone778UV)
Testing AnyTone 778UV edges ... ok
test_settings (tests.TestCase_AnyTone778UV)
Testing AnyTone 778UV settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 banks ... ok
test_brute_force (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 brute force ... ok
test_clone (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 clone ... ok
test_copy_all (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 copy all ... ok
test_detect (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 detect ... ok
test_edges (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 edges ... ok
test_settings (tests.TestCase_YaesuFT78007900)
Testing Yaesu FT-7800/7900 settings ... ok
test_banks (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 banks ... ok
test_brute_force (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 brute force ... ok
test_clone (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 clone ... ok
test_copy_all (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 copy all ... ok
test_detect (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 detect ... ok
test_edges (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 edges ... ok
test_settings (tests.TestCase_YaesuVX7)
Testing Yaesu VX-7 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_AnyToneOBLTR8R)
Testing AnyTone OBLTR-8R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_AnyToneOBLTR8R)
Testing AnyTone OBLTR-8R brute force ... ok
test_clone (tests.TestCase_AnyToneOBLTR8R)
Testing AnyTone OBLTR-8R clone ... ok
test_copy_all (tests.TestCase_AnyToneOBLTR8R)
Testing AnyTone OBLTR-8R copy all ... ok
test_detect (tests.TestCase_AnyToneOBLTR8R)
Testing AnyTone OBLTR-8R detect ... ok
test_edges (tests.TestCase_AnyToneOBLTR8R)
Testing AnyTone OBLTR-8R edges ... ok
test_settings (tests.TestCase_AnyToneOBLTR8R)
Testing AnyTone OBLTR-8R settings ... ok
test_banks (tests.TestCase_AnyToneTERMN8R)
Testing AnyTone TERMN-8R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_AnyToneTERMN8R)
Testing AnyTone TERMN-8R brute force ... ok
test_clone (tests.TestCase_AnyToneTERMN8R)
Testing AnyTone TERMN-8R clone ... ok
test_copy_all (tests.TestCase_AnyToneTERMN8R)
Testing AnyTone TERMN-8R copy all ... ok
test_detect (tests.TestCase_AnyToneTERMN8R)
Testing AnyTone TERMN-8R detect ... ok
test_edges (tests.TestCase_AnyToneTERMN8R)
Testing AnyTone TERMN-8R edges ... ok
test_settings (tests.TestCase_AnyToneTERMN8R)
Testing AnyTone TERMN-8R settings ... ok
test_banks (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR banks ... ok
test_brute_force (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR brute force ... ok
test_clone (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR clone ... ok
test_copy_all (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR copy all ... ok
test_detect (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR detect ... ok
test_edges (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR edges ... ok
test_settings (tests.TestCase_YaesuVX8DR)
Testing Yaesu VX-8DR settings ... ok
test_banks (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE banks ... ok
test_brute_force (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE brute force ... ok
test_clone (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE clone ... ok
test_copy_all (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE copy all ... ok
test_detect (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE detect ... ok
test_edges (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE edges ... ok
test_settings (tests.TestCase_YaesuVX8GE)
Testing Yaesu VX-8GE settings ... ok
test_banks (tests.TestCase_BaofengF11)
Testing Baofeng F-11 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengF11)
Testing Baofeng F-11 brute force ... ok
test_clone (tests.TestCase_BaofengF11)
Testing Baofeng F-11 clone ... ok
test_copy_all (tests.TestCase_BaofengF11)
Testing Baofeng F-11 copy all ... ok
test_detect (tests.TestCase_BaofengF11)
Testing Baofeng F-11 detect ... ok
test_edges (tests.TestCase_BaofengF11)
Testing Baofeng F-11 edges ... ok
test_settings (tests.TestCase_BaofengF11)
Testing Baofeng F-11 settings ... ok
test_banks (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 brute force ... ok
test_clone (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 clone ... ok
test_copy_all (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 copy all ... ok
test_detect (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 detect ... ok
test_edges (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 edges ... ok
test_settings (tests.TestCase_BTECHGMRS50X1)
Testing BTECH GMRS-50X1 settings ... ok
test_banks (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 brute force ... ok
test_clone (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 clone ... ok
test_copy_all (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 copy all ... ok
test_detect (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 detect ... ok
test_edges (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 edges ... ok
test_settings (tests.TestCase_YaesuFT817)
Testing Yaesu FT-817 settings ... ok
test_banks (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R banks ... ok
test_brute_force (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R brute force ... ok
test_clone (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R clone ... ok
test_copy_all (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R copy all ... ok
test_detect (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R detect ... ok
test_edges (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R edges ... ok
test_settings (tests.TestCase_YaesuVX8R)
Testing Yaesu VX-8R settings ... ok
test_banks (tests.TestCase_TYTTH350)
Testing TYT TH-350 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTH350)
Testing TYT TH-350 brute force ... ok
test_clone (tests.TestCase_TYTTH350)
Testing TYT TH-350 clone ... ok
test_copy_all (tests.TestCase_TYTTH350)
Testing TYT TH-350 copy all ... ok
test_detect (tests.TestCase_TYTTH350)
Testing TYT TH-350 detect ... ok
test_edges (tests.TestCase_TYTTH350)
Testing TYT TH-350 edges ... ok
test_settings (tests.TestCase_TYTTH350)
Testing TYT TH-350 settings ... ok
test_banks (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M brute force ... ok
test_clone (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M clone ... ok
test_copy_all (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M copy all ... ok
test_detect (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M detect ... ok
test_edges (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M edges ... ok
test_settings (tests.TestCase_YaesuFT1802M)
Testing Yaesu FT-1802M settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E brute force ... ok
test_clone (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E clone ... ok
test_copy_all (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E copy all ... ok
test_detect (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E detect ... ok
test_edges (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E edges ... ok
test_settings (tests.TestCase_IcomICW32E)
Testing Icom IC-W32E settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND brute force ... ok
test_clone (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND clone ... ok
test_copy_all (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND copy all ... ok
test_detect (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND detect ... ok
test_edges (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND edges ... ok
test_settings (tests.TestCase_YaesuFT817ND)
Testing Yaesu FT-817ND settings ... ok
test_banks (tests.TestCase_KYDNC630A)
Testing KYD NC-630A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KYDNC630A)
Testing KYD NC-630A brute force ... ok
test_clone (tests.TestCase_KYDNC630A)
Testing KYD NC-630A clone ... ok
test_copy_all (tests.TestCase_KYDNC630A)
Testing KYD NC-630A copy all ... ok
test_detect (tests.TestCase_KYDNC630A)
Testing KYD NC-630A detect ... ok
test_edges (tests.TestCase_KYDNC630A)
Testing KYD NC-630A edges ... ok
test_settings (tests.TestCase_KYDNC630A)
Testing KYD NC-630A settings ... ok
test_banks (tests.TestCase_BaofengUV3R)
Testing Baofeng UV-3R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengUV3R)
Testing Baofeng UV-3R brute force ... ok
test_clone (tests.TestCase_BaofengUV3R)
Testing Baofeng UV-3R clone ... ok
test_copy_all (tests.TestCase_BaofengUV3R)
Testing Baofeng UV-3R copy all ... ok
test_detect (tests.TestCase_BaofengUV3R)
Testing Baofeng UV-3R detect ... ok
test_edges (tests.TestCase_BaofengUV3R)
Testing Baofeng UV-3R edges ... ok
test_settings (tests.TestCase_BaofengUV3R)
Testing Baofeng UV-3R settings ... ok
test_banks (tests.TestCase_IcomID31A)
Testing Icom ID-31A banks ... ok
test_brute_force (tests.TestCase_IcomID31A)
Testing Icom ID-31A brute force ... ok
test_clone (tests.TestCase_IcomID31A)
Testing Icom ID-31A clone ... ok
test_copy_all (tests.TestCase_IcomID31A)
Testing Icom ID-31A copy all ... ok
test_detect (tests.TestCase_IcomID31A)
Testing Icom ID-31A detect ... ok
test_edges (tests.TestCase_IcomID31A)
Testing Icom ID-31A edges ... ok
test_settings (tests.TestCase_IcomID31A)
Testing Icom ID-31A settings ... ok
test_banks (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 brute force ... ok
test_clone (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 clone ... ok
test_copy_all (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 copy all ... ok
test_detect (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 detect ... ok
test_edges (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 edges ... ok
test_settings (tests.TestCase_TYTTH7800)
Testing TYT TH-7800 settings ... ok
test_banks (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 brute force ... ok
test_clone (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 clone ... ok
test_copy_all (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 copy all ... ok
test_detect (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 detect ... ok
test_edges (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 edges ... ok
test_settings (tests.TestCase_BTECHGMRSV1)
Testing BTECH GMRS-V1 settings ... ok
test_banks (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) brute force ... ok
test_clone (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) clone ... ok
test_copy_all (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) copy all ... ok
test_detect (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) detect ... ok
test_edges (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) edges ... ok
test_settings (tests.TestCase_YaesuFT817NDUS)
Testing Yaesu FT-817ND (US) settings ... ok
test_banks (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M brute force ... ok
test_clone (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M clone ... ok
test_copy_all (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M copy all ... ok
test_detect (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M detect ... ok
test_edges (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M edges ... ok
test_settings (tests.TestCase_PolmarDB50M)
Testing Polmar DB-50M settings ... ok
test_banks (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D banks ... ok
test_brute_force (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D brute force ... ok
test_clone (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D clone ... ok
test_copy_all (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D copy all ... ok
test_detect (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D detect ... ok
test_edges (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D edges ... ok
test_settings (tests.TestCase_YaesuFT1D)
Testing Yaesu FT-1D settings ... ok
test_banks (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) brute force ... ok
test_clone (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) clone ... ok
test_copy_all (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) copy all ... ok
test_detect (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) detect ... ok
test_edges (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) edges ... ok
test_settings (tests.TestCase_KenwoodTHD72clonemode)
Testing Kenwood TH-D72 (clone mode) settings ... ok
test_banks (tests.TestCase_IcomID51)
Testing Icom ID-51 banks ... ok
test_brute_force (tests.TestCase_IcomID51)
Testing Icom ID-51 brute force ... ok
test_clone (tests.TestCase_IcomID51)
Testing Icom ID-51 clone ... ok
test_copy_all (tests.TestCase_IcomID51)
Testing Icom ID-51 copy all ... ok
test_detect (tests.TestCase_IcomID51)
Testing Icom ID-51 detect ... ok
test_edges (tests.TestCase_IcomID51)
Testing Icom ID-51 edges ... ok
test_settings (tests.TestCase_IcomID51)
Testing Icom ID-51 settings ... ok
test_banks (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R banks ... ok
test_brute_force (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R brute force ... ok
test_clone (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R clone ... ok
test_copy_all (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R copy all ... ok
test_detect (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R detect ... ok
test_edges (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R edges ... ok
test_settings (tests.TestCase_YaesuFT25R)
Testing Yaesu FT-25R settings ... ok
test_banks (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R brute force ... ok
test_clone (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R clone ... ok
test_copy_all (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R copy all ... ok
test_detect (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R detect ... ok
test_edges (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R edges ... ok
test_settings (tests.TestCase_PuxingPX2R)
Testing Puxing PX-2R settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 brute force ... ok
test_clone (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 clone ... ok
test_copy_all (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 copy all ... ok
test_detect (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 detect ... ok
test_edges (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 edges ... ok
test_settings (tests.TestCase_TYTTH9800)
Testing TYT TH-9800 settings ... ok
test_banks (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 brute force ... ok
test_clone (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 clone ... ok
test_copy_all (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 copy all ... ok
test_detect (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 detect ... ok
test_edges (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 edges ... ok
test_settings (tests.TestCase_YaesuFT818)
Testing Yaesu FT-818 settings ... ok
test_banks (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 brute force ... ok
test_clone (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 clone ... ok
test_copy_all (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 copy all ... ok
test_detect (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 detect ... ok
test_edges (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 edges ... skipped 'No mutable memory locations found'
test_settings (tests.TestCase_BTECHMURSV1)
Testing BTECH MURS-V1 settings ... ok
test_banks (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G banks ... ok
test_brute_force (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G brute force ... ok
test_clone (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G clone ... ok
test_copy_all (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G copy all ... ok
test_detect (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G detect ... ok
test_edges (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G edges ... ok
test_settings (tests.TestCase_KenwoodTK272G)
Testing Kenwood TK-272G settings ... ok
test_banks (tests.TestCase_PuxingPX777)
Testing Puxing PX-777 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_PuxingPX777)
Testing Puxing PX-777 brute force ... ok
test_clone (tests.TestCase_PuxingPX777)
Testing Puxing PX-777 clone ... ok
test_copy_all (tests.TestCase_PuxingPX777)
Testing Puxing PX-777 copy all ... ok
test_detect (tests.TestCase_PuxingPX777)
Testing Puxing PX-777 detect ... ok
test_edges (tests.TestCase_PuxingPX777)
Testing Puxing PX-777 edges ... ok
test_settings (tests.TestCase_PuxingPX777)
Testing Puxing PX-777 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 brute force ... ok
test_clone (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 clone ... ok
test_copy_all (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 copy all ... ok
test_detect (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 detect ... ok
test_edges (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 edges ... ok
test_settings (tests.TestCase_BTECHUV2501220)
Testing BTECH UV-2501+220 settings ... ok
test_banks (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 brute force ... ok
test_clone (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 clone ... ok
test_copy_all (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 copy all ... ok
test_detect (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 detect ... ok
test_edges (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 edges ... ok
test_settings (tests.TestCase_TYTTHUV3R25)
Testing TYT TH-UV3R-25 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K brute force ... ok
test_clone (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K clone ... ok
test_copy_all (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K copy all ... ok
test_detect (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K detect ... ok
test_edges (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K edges ... ok
test_settings (tests.TestCase_PuxingPX888K)
Testing Puxing PX-888K settings ... ok
test_banks (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R brute force ... ok
test_clone (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R clone ... ok
test_copy_all (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R copy all ... ok
test_detect (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R detect ... ok
test_edges (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R edges ... ok
test_settings (tests.TestCase_TYTTHUV3R)
Testing TYT TH-UV3R settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D brute force ... ok
test_clone (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D clone ... ok
test_copy_all (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D copy all ... ok
test_detect (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D detect ... ok
test_edges (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D edges ... ok
test_settings (tests.TestCase_QYTKT7900D)
Testing QYT KT7900D settings ... ok
test_banks (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 brute force ... ok
test_clone (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 clone ... ok
test_copy_all (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 copy all ... ok
test_detect (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 detect ... ok
test_edges (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 edges ... ok
test_settings (tests.TestCase_TYTTHUV8000)
Testing TYT TH-UV8000 settings ... ok
test_banks (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 brute force ... ok
test_clone (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 clone ... ok
test_copy_all (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 copy all ... ok
test_detect (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 detect ... ok
test_edges (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 edges ... ok
test_settings (tests.TestCase_TYTTHUVF1)
Testing TYT TH-UVF1 settings ... ok
test_banks (tests.TestCase_TYTTH9000144)
Testing TYT TH9000_144 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_TYTTH9000144)
Testing TYT TH9000_144 brute force ... ok
test_clone (tests.TestCase_TYTTH9000144)
Testing TYT TH9000_144 clone ... ok
test_copy_all (tests.TestCase_TYTTH9000144)
Testing TYT TH9000_144 copy all ... ok
test_detect (tests.TestCase_TYTTH9000144)
Testing TYT TH9000_144 detect ... ok
test_edges (tests.TestCase_TYTTH9000144)
Testing TYT TH9000_144 edges ... ok
test_settings (tests.TestCase_TYTTH9000144)
Testing TYT TH9000_144 settings ... ok
test_banks (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R brute force ... ok
test_clone (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R clone ... ok
test_copy_all (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R copy all ... ok
test_detect (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R detect ... ok
test_edges (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R edges ... ok
test_settings (tests.TestCase_BaofengUV5R)
Testing Baofeng UV-5R settings ... ok
test_banks (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 brute force ... ok
test_clone (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 clone ... ok
test_copy_all (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 copy all ... ok
test_detect (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 detect ... ok
test_edges (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 edges ... ok
test_settings (tests.TestCase_YaesuFT857897)
Testing Yaesu FT-857/897 settings ... ok
test_banks (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 brute force ... ok
test_clone (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 clone ... ok
test_copy_all (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 copy all ... ok
test_detect (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 detect ... ok
test_edges (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 edges ... ok
test_settings (tests.TestCase_KenwoodTK3180K2)
Testing Kenwood TK-3180K2 settings ... ok
test_banks (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) brute force ... ok
test_clone (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) clone ... ok
test_copy_all (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) copy all ... ok
test_detect (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) detect ... ok
test_edges (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) edges ... ok
test_settings (tests.TestCase_YaesuFT857897US)
Testing Yaesu FT-857/897 (US) settings ... ok
test_banks (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D brute force ... ok
test_clone (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D clone ... ok
test_copy_all (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D copy all ... ok
test_detect (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D detect ... ok
test_edges (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D edges ... ok
test_settings (tests.TestCase_QYTKT8900D)
Testing QYT KT8900D settings ... ok
test_banks (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M brute force ... ok
test_clone (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M clone ... ok
test_copy_all (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M copy all ... ok
test_detect (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M detect ... ok
test_edges (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M edges ... ok
test_settings (tests.TestCase_YaesuFT2800M)
Testing Yaesu FT-2800M settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus banks ... ok
test_brute_force (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus brute force ... ok
test_clone (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus clone ... ok
test_copy_all (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus copy all ... ok
test_detect (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus detect ... ok
test_edges (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus edges ... ok
test_settings (tests.TestCase_IcomID51Plus)
Testing Icom ID-51 Plus settings ... ok
test_banks (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 brute force ... ok
test_clone (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 clone ... ok
test_copy_all (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 copy all ... ok
test_detect (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 detect ... ok
test_edges (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 edges ... ok
test_settings (tests.TestCase_BTECHUV25X2)
Testing BTECH UV-25X2 settings ... ok
test_banks (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G banks ... ok
test_brute_force (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G brute force ... ok
test_clone (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G clone ... ok
test_copy_all (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G copy all ... ok
test_detect (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G detect ... ok
test_edges (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G edges ... ok
test_settings (tests.TestCase_KenwoodTK760G)
Testing Kenwood TK-760G settings ... ok
test_banks (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 banks ... ok
test_brute_force (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 brute force ... ok
test_clone (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 clone ... ok
test_copy_all (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 copy all ... ok
test_detect (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 detect ... ok
test_edges (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 edges ... ok
test_settings (tests.TestCase_YaesuFT8800)
Testing Yaesu FT-8800 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 brute force ... ok
test_clone (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 clone ... ok
test_copy_all (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 copy all ... ok
test_detect (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 detect ... ok
test_edges (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 edges ... ok
test_settings (tests.TestCase_VertexStandardVXA700)
Testing Vertex Standard VXA-700 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 brute force ... ok
test_clone (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 clone ... ok
test_copy_all (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 copy all ... ok
test_detect (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 detect ... ok
test_edges (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 edges ... ok
test_settings (tests.TestCase_RadioddityGA510)
Testing Radioddity GA-510 settings ... ok
test_banks (tests.TestCase_IcomID800H)
Testing Icom ID-800H banks ... ok
test_brute_force (tests.TestCase_IcomID800H)
Testing Icom ID-800H brute force ... ok
test_clone (tests.TestCase_IcomID800H)
Testing Icom ID-800H clone ... ok
test_copy_all (tests.TestCase_IcomID800H)
Testing Icom ID-800H copy all ... ok
test_detect (tests.TestCase_IcomID800H)
Testing Icom ID-800H detect ... ok
test_edges (tests.TestCase_IcomID800H)
Testing Icom ID-800H edges ... ok
test_settings (tests.TestCase_IcomID800H)
Testing Icom ID-800H settings ... ok
test_banks (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R brute force ... ok
test_clone (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R clone ... ok
test_copy_all (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R copy all ... ok
test_detect (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R detect ... ok
test_edges (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R edges ... ok
test_settings (tests.TestCase_BaofengUV6R)
Testing Baofeng UV-6R settings ... ok
test_banks (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 brute force ... ok
test_clone (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 clone ... ok
test_copy_all (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 copy all ... ok
test_detect (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 detect ... ok
test_edges (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 edges ... ok
test_settings (tests.TestCase_KenwoodTK8102)
Testing Kenwood TK-8102 settings ... ok
test_banks (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 brute force ... ok
test_clone (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 clone ... ok
test_copy_all (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 copy all ... ok
test_detect (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 detect ... ok
test_edges (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 edges ... ok
test_settings (tests.TestCase_YaesuFT8900)
Testing Yaesu FT-8900 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 brute force ... ok
test_clone (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 clone ... ok
test_copy_all (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 copy all ... ok
test_detect (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 detect ... ok
test_edges (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 edges ... ok
test_settings (tests.TestCase_BTECHUV25X4)
Testing BTECH UV-25X4 settings ... ok
test_banks (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R banks ... ok
test_brute_force (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R brute force ... ok
test_clone (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R clone ... ok
test_copy_all (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R copy all ... ok
test_detect (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R detect ... ok
test_edges (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R edges ... ok
test_settings (tests.TestCase_YaesuFT2900R1900R)
Testing Yaesu FT-2900R/1900R settings ... ok
test_banks (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 brute force ... ok
test_clone (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 clone ... ok
test_copy_all (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 copy all ... ok
test_detect (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 detect ... ok
test_edges (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 edges ... ok
test_settings (tests.TestCase_WACCOMMINI8900)
Testing WACCOM MINI-8900 settings ... ok
test_banks (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 brute force ... ok
test_clone (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 clone ... ok
test_copy_all (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 copy all ... ok
test_detect (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 detect ... ok
test_edges (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 edges ... ok
test_settings (tests.TestCase_BaofengUVB5)
Testing Baofeng UV-B5 settings ... ok
test_banks (tests.TestCase_RadioddityR2)
Testing Radioddity R2 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RadioddityR2)
Testing Radioddity R2 brute force ... ok
test_clone (tests.TestCase_RadioddityR2)
Testing Radioddity R2 clone ... ok
test_copy_all (tests.TestCase_RadioddityR2)
Testing Radioddity R2 copy all ... ok
test_detect (tests.TestCase_RadioddityR2)
Testing Radioddity R2 detect ... ok
test_edges (tests.TestCase_RadioddityR2)
Testing Radioddity R2 edges ... ok
test_settings (tests.TestCase_RadioddityR2)
Testing Radioddity R2 settings ... ok
test_banks (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 brute force ... ok
test_clone (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 clone ... ok
test_copy_all (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 copy all ... ok
test_detect (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 detect ... ok
test_edges (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 edges ... ok
test_settings (tests.TestCase_KenwoodTK8180)
Testing Kenwood TK-8180 settings ... ok
test_banks (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 brute force ... ok
test_clone (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 clone ... ok
test_copy_all (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 copy all ... ok
test_detect (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 detect ... ok
test_edges (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 edges ... ok
test_settings (tests.TestCase_WouxunKG816)
Testing Wouxun KG-816 settings ... ok
test_banks (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 brute force ... ok
test_clone (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 clone ... ok
test_copy_all (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 copy all ... ok
test_detect (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 detect ... ok
test_edges (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 edges ... ok
test_settings (tests.TestCase_BTECHUV5001)
Testing BTECH UV-5001 settings ... ok
test_banks (tests.TestCase_RadtelT18)
Testing Radtel T18 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RadtelT18)
Testing Radtel T18 brute force ... ok
test_clone (tests.TestCase_RadtelT18)
Testing Radtel T18 clone ... ok
test_copy_all (tests.TestCase_RadtelT18)
Testing Radtel T18 copy all ... ok
test_detect (tests.TestCase_RadtelT18)
Testing Radtel T18 detect ... ok
test_edges (tests.TestCase_RadtelT18)
Testing Radtel T18 edges ... ok
test_settings (tests.TestCase_RadtelT18)
Testing Radtel T18 settings ... ok
test_banks (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D brute force ... ok
test_clone (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D clone ... ok
test_copy_all (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D copy all ... ok
test_detect (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D detect ... ok
test_edges (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D edges ... ok
test_settings (tests.TestCase_YaesuFT450D)
Testing Yaesu FT-450D settings ... ok
test_banks (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 brute force ... ok
test_clone (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 clone ... ok
test_copy_all (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 copy all ... ok
test_detect (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 detect ... ok
test_edges (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 edges ... ok
test_settings (tests.TestCase_BaojieBJ9900)
Testing Baojie BJ-9900 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 brute force ... ok
test_clone (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 clone ... ok
test_copy_all (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 copy all ... ok
test_detect (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 detect ... ok
test_edges (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 edges ... ok
test_settings (tests.TestCase_WouxunKG818)
Testing Wouxun KG-818 settings ... ok
test_banks (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D banks ... ok
test_brute_force (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D brute force ... ok
test_clone (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D clone ... ok
test_copy_all (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D copy all ... ok
test_detect (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D detect ... ok
test_edges (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D edges ... ok
test_settings (tests.TestCase_YaesuFT2D)
Testing Yaesu FT2D settings ... ok
test_banks (tests.TestCase_RetevisRT21)
Testing Retevis RT21 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT21)
Testing Retevis RT21 brute force ... ok
test_clone (tests.TestCase_RetevisRT21)
Testing Retevis RT21 clone ... ok
test_copy_all (tests.TestCase_RetevisRT21)
Testing Retevis RT21 copy all ... ok
test_detect (tests.TestCase_RetevisRT21)
Testing Retevis RT21 detect ... ok
test_edges (tests.TestCase_RetevisRT21)
Testing Retevis RT21 edges ... ok
test_settings (tests.TestCase_RetevisRT21)
Testing Retevis RT21 settings ... ok
test_banks (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode brute force ... ok
test_clone (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode clone ... ok
test_copy_all (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode copy all ... ok
test_detect (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode detect ... ok
test_edges (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode edges ... ok
test_settings (tests.TestCase_KenwoodTMD710GCloneMode)
Testing Kenwood TM-D710G_CloneMode settings ... ok
test_banks (tests.TestCase_BTECHUV50X2)
Testing BTECH UV-50X2 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV50X2)
Testing BTECH UV-50X2 brute force ... ok
test_clone (tests.TestCase_BTECHUV50X2)
Testing BTECH UV-50X2 clone ... ok
test_copy_all (tests.TestCase_BTECHUV50X2)
Testing BTECH UV-50X2 copy all ... ok
test_detect (tests.TestCase_BTECHUV50X2)
Testing BTECH UV-50X2 detect ... ok
test_edges (tests.TestCase_BTECHUV50X2)
Testing BTECH UV-50X2 edges ... ok
test_settings (tests.TestCase_BTECHUV50X2)
Testing BTECH UV-50X2 settings ... ok
test_banks (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus brute force ... ok
test_clone (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus clone ... ok
test_copy_all (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus copy all ... ok
test_detect (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus detect ... ok
test_edges (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus edges ... ok
test_settings (tests.TestCase_BoblovX3Plus)
Testing Boblov X3Plus settings ... ok
test_banks (tests.TestCase_YaesuFT4VR)
Testing Yaesu FT-4VR banks ... ok
test_brute_force (tests.TestCase_YaesuFT4VR)
Testing Yaesu FT-4VR brute force ... ok
test_clone (tests.TestCase_YaesuFT4VR)
Testing Yaesu FT-4VR clone ... ok
test_copy_all (tests.TestCase_YaesuFT4VR)
Testing Yaesu FT-4VR copy all ... ok
test_detect (tests.TestCase_YaesuFT4VR)
Testing Yaesu FT-4VR detect ... ok
test_edges (tests.TestCase_YaesuFT4VR)
Testing Yaesu FT-4VR edges ... ok
test_settings (tests.TestCase_YaesuFT4VR)
Testing Yaesu FT-4VR settings ... ok
test_banks (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 brute force ... ok
test_clone (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 copy all ... ok
test_detect (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 detect ... ok
test_edges (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 edges ... ok
test_settings (tests.TestCase_WouxunKGUV6)
Testing Wouxun KG-UV6 settings ... ok
test_banks (tests.TestCase_RetevisRT22)
Testing Retevis RT22 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT22)
Testing Retevis RT22 brute force ... ok
test_clone (tests.TestCase_RetevisRT22)
Testing Retevis RT22 clone ... ok
test_copy_all (tests.TestCase_RetevisRT22)
Testing Retevis RT22 copy all ... ok
test_detect (tests.TestCase_RetevisRT22)
Testing Retevis RT22 detect ... ok
test_edges (tests.TestCase_RetevisRT22)
Testing Retevis RT22 edges ... ok
test_settings (tests.TestCase_RetevisRT22)
Testing Retevis RT22 settings ... ok
test_banks (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV brute force ... ok
test_clone (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV clone ... ok
test_copy_all (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV copy all ... ok
test_detect (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV detect ... ok
test_edges (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV edges ... ok
test_settings (tests.TestCase_CRTMicronUV)
Testing CRT Micron UV settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode brute force ... ok
test_clone (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode clone ... ok
test_copy_all (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode copy all ... ok
test_detect (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode detect ... ok
test_edges (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode edges ... ok
test_settings (tests.TestCase_KenwoodTMD710CloneMode)
Testing Kenwood TM-D710_CloneMode settings ... ok
test_banks (tests.TestCase_YaesuFT4XE)
Testing Yaesu FT-4XE banks ... ok
test_brute_force (tests.TestCase_YaesuFT4XE)
Testing Yaesu FT-4XE brute force ... ok
test_clone (tests.TestCase_YaesuFT4XE)
Testing Yaesu FT-4XE clone ... ok
test_copy_all (tests.TestCase_YaesuFT4XE)
Testing Yaesu FT-4XE copy all ... ok
test_detect (tests.TestCase_YaesuFT4XE)
Testing Yaesu FT-4XE detect ... ok
test_edges (tests.TestCase_YaesuFT4XE)
Testing Yaesu FT-4XE edges ... ok
test_settings (tests.TestCase_YaesuFT4XE)
Testing Yaesu FT-4XE settings ... ok
test_banks (tests.TestCase_RetevisRT23)
Testing Retevis RT23 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT23)
Testing Retevis RT23 brute force ... ok
test_clone (tests.TestCase_RetevisRT23)
Testing Retevis RT23 clone ... ok
test_copy_all (tests.TestCase_RetevisRT23)
Testing Retevis RT23 copy all ... ok
test_detect (tests.TestCase_RetevisRT23)
Testing Retevis RT23 detect ... ok
test_edges (tests.TestCase_RetevisRT23)
Testing Retevis RT23 edges ... ok
test_settings (tests.TestCase_RetevisRT23)
Testing Retevis RT23 settings ... ok
test_banks (tests.TestCase_BTECHUV50X3)
Testing BTECH UV-50X3 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_BTECHUV50X3)
Testing BTECH UV-50X3 brute force ... ok
test_clone (tests.TestCase_BTECHUV50X3)
Testing BTECH UV-50X3 clone ... ok
test_copy_all (tests.TestCase_BTECHUV50X3)
Testing BTECH UV-50X3 copy all ... ok
test_detect (tests.TestCase_BTECHUV50X3)
Testing BTECH UV-50X3 detect ... ok
test_edges (tests.TestCase_BTECHUV50X3)
Testing BTECH UV-50X3 edges ... ok
test_settings (tests.TestCase_BTECHUV50X3)
Testing BTECH UV-50X3 settings ... ok
test_banks (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D brute force ... ok
test_clone (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D clone ... ok
test_copy_all (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D copy all ... ok
test_detect (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D detect ... ok
test_edges (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D edges ... ok
test_settings (tests.TestCase_WouxunKGUV8D)
Testing Wouxun KG-UV8D settings ... ok
test_banks (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D banks ... ok
test_brute_force (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D brute force ... ok
test_clone (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D clone ... ok
test_copy_all (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D copy all ... ok
test_detect (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D detect ... ok
test_edges (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D edges ... ok
test_settings (tests.TestCase_YaesuFT3D)
Testing Yaesu FT3D settings ... ok
test_banks (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode brute force ... ok
test_clone (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode clone ... ok
test_copy_all (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode copy all ... ok
test_detect (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode detect ... ok
test_edges (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode edges ... ok
test_settings (tests.TestCase_KenwoodTS480CloneMode)
Testing Kenwood TS-480_CloneMode settings ... ok
test_banks (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A brute force ... ok
test_clone (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A clone ... ok
test_copy_all (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A copy all ... ok
test_detect (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A detect ... ok
test_edges (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A edges ... ok
test_settings (tests.TestCase_FeidaxinFD268A)
Testing Feidaxin FD-268A settings ... ok
test_banks (tests.TestCase_RetevisRT26)
Testing Retevis RT26 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_RetevisRT26)
Testing Retevis RT26 brute force ... ok
test_clone (tests.TestCase_RetevisRT26)
Testing Retevis RT26 clone ... ok
test_copy_all (tests.TestCase_RetevisRT26)
Testing Retevis RT26 copy all ... ok
test_detect (tests.TestCase_RetevisRT26)
Testing Retevis RT26 detect ... ok
test_edges (tests.TestCase_RetevisRT26)
Testing Retevis RT26 edges ... ok
test_settings (tests.TestCase_RetevisRT26)
Testing Retevis RT26 settings ... ok
test_banks (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR banks ... ok
test_brute_force (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR brute force ... ok
test_clone (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR clone ... ok
test_copy_all (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR copy all ... ok
test_detect (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR detect ... ok
test_edges (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR edges ... ok
test_settings (tests.TestCase_YaesuFT4XR)
Testing Yaesu FT-4XR settings ... ok
test_banks (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode brute force ... ok
test_clone (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode clone ... ok
test_copy_all (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode copy all ... ok
test_detect (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode detect ... ok
test_edges (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode edges ... ok
test_settings (tests.TestCase_KenwoodTS590SGCloneMode)
Testing Kenwood TS-590SG_CloneMode settings ... ok
test_banks (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B brute force ... ok
test_clone (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B clone ... ok
test_copy_all (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B copy all ... ok
test_detect (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B detect ... ok
test_edges (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B edges ... ok
test_settings (tests.TestCase_FeidaxinFD268B)
Testing Feidaxin FD-268B settings ... ok
test_banks (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D brute force ... ok
test_clone (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D clone ... ok
test_copy_all (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D copy all ... ok
test_detect (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D detect ... ok
test_edges (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D edges ... ok
test_settings (tests.TestCase_YaesuFTM3200D)
Testing Yaesu FTM-3200D settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT50)
Testing Yaesu FT-50 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFT50)
Testing Yaesu FT-50 brute force ... ok
test_clone (tests.TestCase_YaesuFT50)
Testing Yaesu FT-50 clone ... ok
test_copy_all (tests.TestCase_YaesuFT50)
Testing Yaesu FT-50 copy all ... ok
test_detect (tests.TestCase_YaesuFT50)
Testing Yaesu FT-50 detect ... ok
test_edges (tests.TestCase_YaesuFT50)
Testing Yaesu FT-50 edges ... ok
test_settings (tests.TestCase_YaesuFT50)
Testing Yaesu FT-50 settings ... ok
test_banks (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV brute force ... ok
test_clone (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV clone ... ok
test_copy_all (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV copy all ... ok
test_detect (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV detect ... ok
test_edges (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV edges ... ok
test_settings (tests.TestCase_LUITONLT725UV)
Testing LUITON LT-725UV settings ... ok
test_banks (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B brute force ... ok
test_clone (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B clone ... ok
test_copy_all (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B copy all ... ok
test_detect (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B detect ... ok
test_edges (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B edges ... ok
test_settings (tests.TestCase_FeidaxinFD288B)
Testing Feidaxin FD-288B settings ... ok
test_banks (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 banks ... ok
test_brute_force (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 brute force ... ok
test_clone (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 clone ... ok
test_copy_all (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 copy all ... ok
test_detect (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 detect ... ok
test_edges (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 edges ... ok
test_settings (tests.TestCase_YaesuFT60)
Testing Yaesu FT-60 settings ... ok
test_banks (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 brute force ... ok
test_clone (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 clone ... ok
test_copy_all (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 copy all ... ok
test_detect (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 detect ... ok
test_edges (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 edges ... ok
test_settings (tests.TestCase_YaesuFTM350)
Testing Yaesu FTM-350 settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_IcomIC208H)
Testing Icom IC-208H banks ... ok
test_brute_force (tests.TestCase_IcomIC208H)
Testing Icom IC-208H brute force ... ok
test_clone (tests.TestCase_IcomIC208H)
Testing Icom IC-208H clone ... ok
test_copy_all (tests.TestCase_IcomIC208H)
Testing Icom IC-208H copy all ... ok
test_detect (tests.TestCase_IcomIC208H)
Testing Icom IC-208H detect ... ok
test_edges (tests.TestCase_IcomIC208H)
Testing Icom IC-208H edges ... ok
test_settings (tests.TestCase_IcomIC208H)
Testing Icom IC-208H settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E banks ... ok
test_brute_force (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E brute force ... ok
test_clone (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E clone ... ok
test_copy_all (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E copy all ... ok
test_detect (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E detect ... ok
test_edges (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E edges ... ok
test_settings (tests.TestCase_YaesuFT65E)
Testing Yaesu FT-65E settings ... ok
test_banks (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H brute force ... ok
test_clone (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H clone ... ok
test_copy_all (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H copy all ... ok
test_detect (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H detect ... ok
test_edges (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H edges ... ok
test_settings (tests.TestCase_IcomIC2100H)
Testing Icom IC-2100H settings ... skipped 'Settings not supported'
test_banks (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D banks ... skipped 'Banks not supported'
test_brute_force (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D brute force ... ok
test_clone (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D clone ... ok
test_copy_all (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D copy all ... ok
test_detect (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D detect ... ok
test_edges (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D edges ... ok
test_settings (tests.TestCase_YaesuFTM7250D)
Testing Yaesu FTM-7250D settings ... skipped 'Settings not supported'
----------------------------------------------------------------------
Ran 1001 tests in 400.380s
OK (skipped=141)
struct memory {
bbcd rx_freq[4];
bbcd tx_freq[4];
lbcd rx_tone[2];
lbcd tx_tone[2];
u8 unknown10:5,
highpower:1,
unknown11:2;
u8 unknown20:4,
narrow:1,
unknown21:3;
u8 unknown31:1,
scanadd:1,
unknown32:6;
u8 unknown4;
};
struct name {
char name[7];
};
#seekto 0x0010;
struct memory channels[128];
#seekto 0x08C0;
struct name names[128];
#seekto 0x2020;
struct memory vfo1;
struct memory vfo2;
style create: /chirp/.tox/style
style installdeps: pep8==1.6.2, future
style inst: /chirp/.tox/.tmp/package/1/chirp-0.3.0dev.zip
style installed: DEPRECATION: Python 2.7 will reach the end of its life on January 1st, 2020. Please upgrade your Python as Python 2.7 won't be maintained after that date. A future version of pip will drop support for Python 2.7.,chirp==0.3.0.dev0,configparser==3.7.4,contextlib2==0.5.5,filelock==3.0.12,future==0.15.2,importlib-metadata==0.18,Mako==1.0.3,MarkupSafe==0.23,mercurial==3.7.3,packaging==19.0,pathlib2==2.3.4,pep8==1.6.2,pluggy==0.12.0,py==1.8.0,pygobject==3.20.0,pyparsing==2.4.0,pyserial==3.0.1,scandir==1.10.0,six==1.12.0,toml==0.10.0,tox==3.13.2,virtualenv==16.6.1,zipp==0.5.2
style run-test-pre: PYTHONHASHSEED='2775528593'
style run-test: commands[0] | python ./tools/cpep8.py
___________________________________ summary ____________________________________
unit: commands succeeded
driver: commands succeeded
style: commands succeeded
congratulations :)
Email was triggered for: Success
Sending email for trigger: Success
1
0
17 Jul '20
Here is an image file Yaesu_FTM-7250D.img for testing purposes
2
1
Dan,
> Changes for Build #626
> [Dan Smith <dsmith(a)danplanet.com>] Refine the fix for anytone778uv with no (or incorrect) memory loaded
>
> The test framework will load the driver with random garbage if no test
> image is present to probe sub-devices. This can cause spurious failures
> of the band probing, so make it a little more tolerant.
>
> Related to #7947
>
Here is a "factory" image from a Retevis RT95 that can be added for testing.
Jim KC9HI
2
2
Hi Dan,
I saw the change you made to check for the presence of a serial connection.
Not something I was aware of, obviously.
Defaulting _detect_23cm_unit to False (i.e. UX-910 not present) in this
situation has the unfortunate side-effect that Model_Support.html shows
only the 2m and 70cm bands as being supported. Would it be a problem to
change that method to default to True instead, such that all three bands
are shown as supported?
Thanks,
Martin.
KD6YAM
2
2
16 Jul '20
# HG changeset patch
# User Martin Cooper <mfncooper(a)gmail.com>
# Date 1594942267 25200
# Thu Jul 16 16:31:07 2020 -0700
# Node ID bd5e44301bc4278c8020dd250041e5a82632d92a
# Parent 061e53a8a2cc1699bda1df5464be505ca32d572f
Invert default return from _detect_23cm_unit
diff --git a/chirp/drivers/icomciv.py b/chirp/drivers/icomciv.py
--- a/chirp/drivers/icomciv.py
+++ b/chirp/drivers/icomciv.py
@@ -857,7 +857,7 @@
# installed, so we present 2 banks to the user, for 2m and 70cm.
def _detect_23cm_unit(self):
if not self.pipe:
- return False
+ return True
f = IC910MemFrame()
f.set_location(1, 3) # First memory in 23cm bank
self._send_frame(f)
1
0
[chirp_devel] Patch for Yaesu FTM-7250D - Change FTM7250D driver 'rf.valid.bands' to range of 108MHz to 580 MHz Fixes #8059
by Iain White (Yahoo) 13 Jul '20
by Iain White (Yahoo) 13 Jul '20
13 Jul '20
1
0
13 Jul '20
# HG changeset patch
# User Jim Unroe <rock.unroe(a)gmail.com>
# Date 1594652731 14400
# Mon Jul 13 11:05:31 2020 -0400
# Node ID a832fc7ae354baa666c902ce96f93327622dfa5d
# Parent 061e53a8a2cc1699bda1df5464be505ca32d572f
[BF-A58S] baofeng_w970i.py driver cleanup
This patch cleans up the current tri-band radio model suppport in
preperation for fixing the band limit support in the following patch.
Related to these and similar Baofeng tri-band models:
BF-A58S
UV-82III
BF-UVF10
related to #8063
diff -r 061e53a8a2cc -r a832fc7ae354 chirp/drivers/baofeng_wp970i.py
--- a/chirp/drivers/baofeng_wp970i.py Fri Jul 10 07:24:21 2020 -0700
+++ b/chirp/drivers/baofeng_wp970i.py Mon Jul 13 11:05:31 2020 -0400
@@ -109,6 +109,7 @@
chirp_common.PowerLevel("Med", watts=3.00),
chirp_common.PowerLevel("Low", watts=1.00)]
_vhf_range = (130000000, 180000000)
+ _vhf2_range = (200000000, 260000000)
_uhf_range = (400000000, 521000000)
VALID_BANDS = [_vhf_range,
_uhf_range]
@@ -899,7 +900,7 @@
def get_features(self):
rf = WP970I.get_features(self)
rf.valid_bands = [self._vhf_range,
- (200000000, 260000000),
+ self._vhf2_range,
self._uhf_range]
return rf
1
1
[chirp_devel] Patch for Yaesu FTM-7250D - add image file Yaesu_FTM-7250D.img for testing. Issue #6525
by Iain White (Yahoo) 11 Jul '20
by Iain White (Yahoo) 11 Jul '20
11 Jul '20
1
0