- Developers - lists.chirpmyradio.com

[chirp_devel] FT1900R
by Ran Giladi 23 Mar '13

23 Mar '13

And one more thing I saw: There are two tone fields in the memory structure. It seems that the FT1900 keeps the CTCSS/DCS for transmit and for receive separately, with the receive tone in the first field, and the send tone in the latter. In Reading you don’t see the problem, but when writing and trying to use – it lucks the send tone frequency (or there is one that remains in the memory). I believe this should be corrected in the code, i.e., more fields in the channel tables… Ran

2 1

Re: [chirp_devel] CHIRP programming
by Ran Giladi 23 Mar '13

23 Mar '13

OK, Done. The program works as far as I tested it. It reads and writes into the FT-1900R (i.e., memory content). The details: The memory record (structure) is 2-bytes longer, seems that it include the tone also, maybe other stuff, I did not check. Memory location: 76Eh Memory status: 6EEh All the rest seems to be exactly like the 1802. The program, and some dumps are attached. Some observations: When changed from VFO to MEM, 0EAh changed from 01h to 02h, 0168h changed from 73h to 74h, 16Ah: 01h->02h, 01E8: 73h->74h. After Adding memory content M1 (145625K), 0EBh: 01h->02h, 0168h changed from 74h to 75h, 16Bh: 02h->01h, 01E8: 74h->75h. In addition, it replaces 144000K with 145625K at 3B0h, 144000K was the initial VFO freq after factory reset. (in addition, it stored the frequency in place, i.e., at 0784h, and updating mem index in 06eFh – from 03h to 33h.) Adding 148715K into M2 changed memory holding (or vfo) at 03B0h (3bytes of channel in bbcd), as well as changed the required memory record (at 0798h) and mem index (06EEh: 00->03h). Changing the channel/memory name of M2 simply changed the 6-bytes name at 079Ch. Last, I added 145325K into M3, while for some reason changing into this frequency turned duplex on with – shift (I did not change anything from factory reset regarding this, so maybe it got it from old memory content). This had several changes, apart from the memory record/structure. First, as usual, 03B0h changed into the new frequency. Second, 03EEh changed from 00 to 01 (duplex?). Then, mem index changed (06EEh: 03h->33h) and the mem freq changes (at 07ACh). Additionally, the byte before the frequency, i.e., flags, changed from 01h into 0Ch (like when I added M1 and M2). Saving M3 again (after setting up tone into 91.5 (was 100 by default), changed 14Bh: 00->33h, 168h: DE00 0202 0000 0000 -> AB00 FFFF FFFF FFFF, and approximately the same at 1CBh and 1E8h. This is, of course, in addition to handle the M3 record: after the freq shift value (006000), it changes the flags at 7B8h: 0Ch->09h, and again the unknown flags at the extension 07BDh: 0Ch->09h. Best, Ran

1 0

[chirp_devel] Build test results: Successful
by Build System 22 Mar '13

22 Mar '13

Tested changes: [Tom Hayward <tom(a)tomh.us>] [vx510] Partial driver for Vertex VX-510. #719 I lost interest in finishing support for this radio, but anyone is welcome to complete this driver if they want. Download and decode works, apart from a stray byte at 0xC that I haven't found a good way to handle. It might be a checksum, but I haven't determined the algorithm to check it. Upload is untested and set_memory() is unimplemented. Nearly every byte of the img is decoded, so this shouldn't be very difficult to complete if interested. [Tom Hayward <tom(a)tomh.us>] bitwise: allow #seek in hex (only dec was supported). #715 Full log: Started by an SCM change Building in workspace /var/lib/jenkins/jobs/chirp-test/workspace [workspace] $ hg showconfig paths.default [workspace] $ hg pull --rev default [workspace] $ hg update --clean --rev default 2 files updated, 0 files merged, 0 files removed, 0 files unresolved [workspace] $ hg log --rev . --template {node} [workspace] $ hg log --rev . --template {rev} [workspace] $ hg log --rev ca76c7af25c76fc784273343c201f42c42bf09f3 [workspace] $ hg log --template "<changeset node='{node}' author='{author|xmlescape}' rev='{rev}' date='{date}'><msg>{desc|xmlescape}</msg><added>{file_adds|stringify|xmlescape}</added><deleted>{file_dels|stringify|xmlescape}</deleted><files>{files|stringify|xmlescape}</files><parents>{parents}</parents></changeset>\n" --rev default:0 --follow --prune ca76c7af25c76fc784273343c201f42c42bf09f3 No emails were triggered. [workspace] $ /bin/sh -xe /tmp/hudson525624896671739831.sh + cd tests + ./run_tests Registered Icom_IC-2820H = IC2820Radio Registered AnyTone_5888UV = AnyTone5888UVRadio Registered Icom_IC-2200H = IC2200Radio Registered Yaesu_FT-2800M = FT2800Radio Registered Yaesu_VX-3 = VX3Radio Registered Icom_IC-2100H = IC2100Radio Registered Yaesu_FT-7800 = FT7800Radio Registered Yaesu_FT-8800 = FT8800Radio Registered Yaesu_FT-8900 = FT8900Radio Registered Yaesu_FTM-350 = FTM350Radio Registered Icom_IC-91_92AD_ICF_File = IC9xICFRadio Registered Icom_IC-V82_U82 = ICx8xRadio Registered Yaesu_VX-6 = VX6Radio Registered Yaesu_VX-5 = VX5Radio Registered Yaesu_FT-60 = FT60Radio Registered Yaesu_VX-7 = VX7Radio Registered Baofeng_UV-5R = BaofengUV5R Registered Baofeng_F-11 = BaofengF11Radio Registered Yaesu_FT-1802M = FT1802Radio Registered Kenwood_TK-7102 = KenwoodTK7102Radio Registered Kenwood_TK-8102 = KenwoodTK8102Radio Registered Kenwood_TK-7108 = KenwoodTK7108Radio Registered Kenwood_TK-8108 = KenwoodTK8108Radio Registered Icom_ID-31A = ID31Radio Registered Icom_ID-51A = ID51Radio Registered Icom_IC-2720H = IC2720Radio Registered Icom_IC-T8A = ICT8ARadio Registered Wouxun_KG-UVD1P = KGUVD1PRadio Registered Wouxun_KG-UV6 = KGUV6DRadio Registered Wouxun_KG-816 = KG816Radio Registered Wouxun_KG-818 = KG818Radio Registered TYT_TH-UVF1 = TYTTHUVF1Radio Registered Generic_CSV = CSVRadio Registered RT_Systems_CSV = RTCSVRadio Registered Kenwood_ITM = ITMRadio Registered Alinco_DR03T = DR03Radio Registered Alinco_DR06T = DR06Radio Registered Alinco_DR135T = DR135Radio Registered Alinco_DR235T = DR235Radio Registered Alinco_DR435T = DR435Radio Registered Alinco_DJ596 = DJ596Radio Registered Jetstream_JT220M = JT220MRadio Registered Alinco_DJ175 = DJ175Radio Registered Kenwood_TH-D7 = THD7Radio Registered Kenwood_TH-D7G = THD7GRadio Registered Kenwood_TM-D700 = TMD700Radio Registered Kenwood_TM-V7 = TMV7Radio Registered Kenwood_TM-G707 = TMG707Radio Registered Kenwood_TH-F6 = THF6ARadio Registered Kenwood_TH-F7 = THF7ERadio Registered Kenwood_TM-D710 = TMD710Radio Registered Kenwood_TH-D72_live_mode = THD72Radio Registered Kenwood_TM-V71 = TMV71Radio Registered Kenwood_TH-K2 = THK2Radio Registered Kenwood_TM-271 = TM271Radio Registered Yaesu_VX-8_R = VX8Radio Registered Yaesu_VX-8_DR = VX8DRadio Registered Icom_IC-T7H = ICT7HRadio Registered Icom_IC-Q7A = ICQ7Radio Registered Generic_XML = XMLRadio Registered Kenwood_HMK = HMKRadio Registered Kenwood_TH-D72_clone_mode = THD72Radio Registered Icom_IC-91_92AD = IC9xRadio Registered Icom_IC-T70 = ICT70Radio Registered Icom_IC-208H = IC208Radio Registered Icom_ID-800H_v2 = ID800v2Radio Registered Icom_7200 = Icom7200Radio Registered Icom_7000 = Icom7000Radio Registered Icom_746 = Icom746Radio Registered ARRL_Travel_Plus = TpeRadio Registered Vertex_Standard_VXA-700 = VXA700Radio Registered Icom_IC-W32A = ICW32ARadio Registered Baofeng_UV-3R = UV3RRadio Registered Puxing_PX-777 = Puxing777Radio Registered Puxing_PX-2R = Puxing2RRadio Registered Yaesu_FT-817 = FT817Radio Registered Yaesu_FT-817ND = FT817NDRadio Registered Yaesu_FT-817ND_US = FT817NDUSRadio Registered Yaesu_FT-857_897 = FT857Radio Registered Yaesu_FT-857_897_US = FT857USRadio Registered Icom_ID-880H = ID880Radio Registered Icom_ID-80H = ID80Radio Registered TYT_TH-UV3R = TYTUV3RRadio Alinco DJ175 Detect PASSED: All tests Alinco DJ175 CopyAll PASSED: All tests Alinco DJ175 Clone PASSED: All tests Alinco DJ175 BruteForce PASSED: All tests Alinco DJ175 Edges PASSED: All tests Alinco DJ175 Banks SKIPPED: Banks not supported Alinco DJ596 Detect PASSED: All tests Alinco DJ596 CopyAll PASSED: All tests Alinco DJ596 Clone PASSED: All tests Alinco DJ596 BruteForce PASSED: All tests Alinco DJ596 Edges PASSED: All tests Alinco DJ596 Banks SKIPPED: Banks not supported Alinco DR235T Detect PASSED: All tests Alinco DR235T CopyAll PASSED: All tests Alinco DR235T Clone PASSED: All tests Alinco DR235T BruteForce PASSED: All tests Alinco DR235T Edges PASSED: All tests Alinco DR235T Banks SKIPPED: Banks not supported Baofeng F-11 Detect PASSED: All tests Baofeng F-11 CopyAll PASSED: All tests Baofeng F-11 Clone PASSED: All tests Baofeng F-11 BruteForce PASSED: All tests Baofeng F-11 Edges PASSED: All tests Baofeng F-11 Banks SKIPPED: Banks not supported Baofeng UV-3R Detect PASSED: All tests Baofeng UV-3R CopyAll PASSED: All tests Baofeng UV-3R Clone PASSED: All tests Baofeng UV-3R BruteForce PASSED: All tests Baofeng UV-3R Edges PASSED: All tests Baofeng UV-3R Banks SKIPPED: Banks not supported Baofeng UV-5R Detect PASSED: All tests Baofeng UV-5R CopyAll PASSED: All tests Baofeng UV-5R Clone PASSED: All tests Baofeng UV-5R BruteForce PASSED: All tests Baofeng UV-5R Edges PASSED: All tests Baofeng UV-5R Banks SKIPPED: Banks not supported Icom IC-208H Detect PASSED: All tests Icom IC-208H CopyAll PASSED: All tests Icom IC-208H Clone PASSED: All tests Icom IC-208H BruteForce PASSED: All tests Icom IC-208H Edges PASSED: All tests Icom IC-208H Banks PASSED: All tests Icom IC-2100H Detect PASSED: All tests Icom IC-2100H CopyAll PASSED: All tests Icom IC-2100H Clone PASSED: All tests Icom IC-2100H BruteForce PASSED: All tests Icom IC-2100H Edges PASSED: All tests Icom IC-2100H Banks SKIPPED: Banks not supported Icom IC-2200H Detect PASSED: All tests Icom IC-2200H CopyAll PASSED: All tests Icom IC-2200H Clone PASSED: All tests Icom IC-2200H BruteForce PASSED: All tests Icom IC-2200H Edges PASSED: All tests Icom IC-2200H Banks PASSED: All tests Icom IC-2720H Detect PASSED: All tests Icom IC-2720H CopyAll PASSED: All tests Icom IC-2720H Clone PASSED: All tests Icom IC-2720H BruteForce PASSED: All tests Icom IC-2720H Edges PASSED: All tests Icom IC-2720H Banks PASSED: All tests Icom IC-2820H Detect PASSED: All tests Icom IC-2820H CopyAll PASSED: All tests Icom IC-2820H Clone PASSED: All tests Icom IC-2820H BruteForce PASSED: All tests Icom IC-2820H Edges PASSED: All tests Icom IC-2820H Banks PASSED: All tests Icom IC-Q7A Detect PASSED: All tests Icom IC-Q7A CopyAll PASSED: All tests Icom IC-Q7A Clone PASSED: All tests Icom IC-Q7A BruteForce PASSED: All tests Icom IC-Q7A Edges PASSED: All tests Icom IC-Q7A Banks SKIPPED: Banks not supported Icom IC-T70 Detect PASSED: All tests Icom IC-T70 CopyAll PASSED: All tests Icom IC-T70 Clone PASSED: All tests Icom IC-T70 BruteForce PASSED: All tests Icom IC-T70 Edges PASSED: All tests Icom IC-T70 Banks PASSED: All tests Icom IC-T7H Detect PASSED: All tests Icom IC-T7H CopyAll PASSED: All tests Icom IC-T7H Clone PASSED: All tests Icom IC-T7H BruteForce PASSED: All tests Icom IC-T7H Edges PASSED: All tests Icom IC-T7H Banks SKIPPED: Banks not supported Icom IC-T8A Detect PASSED: All tests Icom IC-T8A CopyAll PASSED: All tests Icom IC-T8A Clone PASSED: All tests Icom IC-T8A BruteForce PASSED: All tests Icom IC-T8A Edges PASSED: All tests Icom IC-T8A Banks SKIPPED: Banks not supported Icom IC-V82/U82 Detect PASSED: All tests Icom IC-V82/U82 CopyAll PASSED: All tests Icom IC-V82/U82 Clone PASSED: All tests Icom IC-V82/U82 BruteForce PASSED: All tests Icom IC-V82/U82 Edges PASSED: All tests Icom IC-V82/U82 Banks PASSED: All tests Icom IC-W32A VHF Detect PASSED: All tests Icom IC-W32A VHF CopyAll PASSED: All tests Icom IC-W32A VHF Clone PASSED: All tests Icom IC-W32A VHF BruteForce PASSED: All tests Icom IC-W32A VHF Edges PASSED: All tests Icom IC-W32A VHF Banks SKIPPED: Banks not supported Icom IC-W32A UHF Detect PASSED: All tests Icom IC-W32A UHF CopyAll PASSED: All tests Icom IC-W32A UHF Clone PASSED: All tests Icom IC-W32A UHF BruteForce PASSED: All tests Icom IC-W32A UHF Edges PASSED: All tests Icom IC-W32A UHF Banks SKIPPED: Banks not supported Icom ID-31A Detect PASSED: All tests Icom ID-31A CopyAll PASSED: All tests Icom ID-31A Clone PASSED: All tests Icom ID-31A BruteForce PASSED: All tests Icom ID-31A Edges PASSED: All tests Icom ID-31A Banks PASSED: All tests Icom ID-51A Detect PASSED: All tests Icom ID-51A CopyAll PASSED: All tests Icom ID-51A Clone PASSED: All tests Icom ID-51A BruteForce PASSED: All tests Icom ID-51A Edges PASSED: All tests Icom ID-51A Banks PASSED: All tests Icom ID-800H v2 Detect PASSED: All tests Icom ID-800H v2 CopyAll PASSED: All tests Icom ID-800H v2 Clone PASSED: All tests Icom ID-800H v2 BruteForce PASSED: All tests Icom ID-800H v2 Edges PASSED: All tests Icom ID-800H v2 Banks PASSED: All tests Icom ID-880H Detect PASSED: All tests Icom ID-880H CopyAll PASSED: All tests Icom ID-880H Clone PASSED: All tests Icom ID-880H BruteForce PASSED: All tests Icom ID-880H Edges PASSED: All tests Icom ID-880H Banks PASSED: All tests Jetstream JT220M Detect PASSED: All tests Jetstream JT220M CopyAll PASSED: All tests Jetstream JT220M Clone PASSED: All tests Jetstream JT220M BruteForce PASSED: All tests Jetstream JT220M Edges PASSED: All tests Jetstream JT220M Banks SKIPPED: Banks not supported Kenwood TH-D72 (clone Detect PASSED: All tests Kenwood TH-D72 (clone CopyAll PASSED: All tests Kenwood TH-D72 (clone Clone PASSED: All tests Kenwood TH-D72 (clone BruteForce PASSED: All tests Kenwood TH-D72 (clone Edges PASSED: All tests Kenwood TH-D72 (clone Banks SKIPPED: Banks not supported Kenwood TK-8102 Detect PASSED: All tests Kenwood TK-8102 CopyAll PASSED: All tests Kenwood TK-8102 Clone PASSED: All tests Kenwood TK-8102 BruteForce PASSED: All tests Kenwood TK-8102 Edges PASSED: All tests Kenwood TK-8102 Banks SKIPPED: Banks not supported Puxing PX-2R Detect PASSED: All tests Puxing PX-2R CopyAll PASSED: All tests Puxing PX-2R Clone PASSED: All tests Puxing PX-2R BruteForce PASSED: All tests Puxing PX-2R Edges PASSED: All tests Puxing PX-2R Banks SKIPPED: Banks not supported Puxing PX-777 Detect PASSED: All tests Puxing PX-777 CopyAll PASSED: All tests Puxing PX-777 Clone PASSED: All tests Puxing PX-777 BruteForce PASSED: All tests Puxing PX-777 Edges PASSED: All tests Puxing PX-777 Banks SKIPPED: Banks not supported TYT TH-UV3R Detect PASSED: All tests TYT TH-UV3R CopyAll PASSED: All tests TYT TH-UV3R Clone PASSED: All tests TYT TH-UV3R BruteForce PASSED: All tests TYT TH-UV3R Edges PASSED: All tests TYT TH-UV3R Banks SKIPPED: Banks not supported TYT TH-UVF1 Detect PASSED: All tests TYT TH-UVF1 CopyAll PASSED: All tests TYT TH-UVF1 Clone PASSED: All tests TYT TH-UVF1 BruteForce PASSED: All tests TYT TH-UVF1 Edges PASSED: All tests TYT TH-UVF1 Banks SKIPPED: Banks not supported Vertex VXA-700 Detect PASSED: All tests Vertex VXA-700 CopyAll PASSED: All tests Vertex VXA-700 Clone PASSED: All tests Vertex VXA-700 BruteForce PASSED: All tests Vertex VXA-700 Edges PASSED: All tests Vertex VXA-700 Banks SKIPPED: Banks not supported Wouxun KG-816 Detect PASSED: All tests Wouxun KG-816 CopyAll PASSED: All tests Wouxun KG-816 Clone PASSED: All tests Wouxun KG-816 BruteForce PASSED: All tests Wouxun KG-816 Edges PASSED: All tests Wouxun KG-816 Banks SKIPPED: Banks not supported Wouxun KG-818 Detect PASSED: All tests Wouxun KG-818 CopyAll PASSED: All tests Wouxun KG-818 Clone PASSED: All tests Wouxun KG-818 BruteForce PASSED: All tests Wouxun KG-818 Edges PASSED: All tests Wouxun KG-818 Banks SKIPPED: Banks not supported Wouxun KG-UV6 Detect PASSED: All tests Wouxun KG-UV6 CopyAll PASSED: All tests Wouxun KG-UV6 Clone PASSED: All tests Wouxun KG-UV6 BruteForce PASSED: All tests Wouxun KG-UV6 Edges PASSED: All tests Wouxun KG-UV6 Banks SKIPPED: Banks not supported Wouxun KG-UVD1P Detect PASSED: All tests Wouxun KG-UVD1P CopyAll PASSED: All tests Wouxun KG-UVD1P Clone PASSED: All tests Wouxun KG-UVD1P BruteForce PASSED: All tests Wouxun KG-UVD1P Edges PASSED: All tests Wouxun KG-UVD1P Banks SKIPPED: Banks not supported Yaesu FT-1802M Detect PASSED: All tests Yaesu FT-1802M CopyAll PASSED: All tests Yaesu FT-1802M Clone PASSED: All tests Yaesu FT-1802M BruteForce PASSED: All tests Yaesu FT-1802M Edges PASSED: All tests Yaesu FT-1802M Banks SKIPPED: Banks not supported Yaesu FT-2800M Detect PASSED: All tests Yaesu FT-2800M CopyAll PASSED: All tests Yaesu FT-2800M Clone PASSED: All tests Yaesu FT-2800M BruteForce PASSED: All tests Yaesu FT-2800M Edges PASSED: All tests Yaesu FT-2800M Banks SKIPPED: Banks not supported Yaesu FT-60 Detect PASSED: All tests Yaesu FT-60 CopyAll PASSED: All tests Yaesu FT-60 Clone PASSED: All tests Yaesu FT-60 BruteForce PASSED: All tests Yaesu FT-60 Edges PASSED: All tests Yaesu FT-60 Banks SKIPPED: Banks not supported Yaesu FT-7800 Detect PASSED: All tests Yaesu FT-7800 CopyAll PASSED: All tests Yaesu FT-7800 Clone PASSED: All tests Yaesu FT-7800 BruteForce PASSED: All tests Yaesu FT-7800 Edges PASSED: All tests Yaesu FT-7800 Banks PASSED: All tests Yaesu FT-817 Detect PASSED: All tests Yaesu FT-817 CopyAll PASSED: All tests Yaesu FT-817 Clone PASSED: All tests Yaesu FT-817 BruteForce PASSED: All tests Yaesu FT-817 Edges PASSED: All tests Yaesu FT-817 Banks SKIPPED: Banks not supported Yaesu FT-817ND Detect PASSED: All tests Yaesu FT-817ND CopyAll PASSED: All tests Yaesu FT-817ND Clone PASSED: All tests Yaesu FT-817ND BruteForce PASSED: All tests Yaesu FT-817ND Edges PASSED: All tests Yaesu FT-817ND Banks SKIPPED: Banks not supported Yaesu FT-817ND (US) Detect PASSED: All tests Yaesu FT-817ND (US) CopyAll PASSED: All tests Yaesu FT-817ND (US) Clone PASSED: All tests Yaesu FT-817ND (US) BruteForce PASSED: All tests Yaesu FT-817ND (US) Edges PASSED: All tests Yaesu FT-817ND (US) Banks SKIPPED: Banks not supported Yaesu FT-857/897 Detect PASSED: All tests Yaesu FT-857/897 CopyAll PASSED: All tests Yaesu FT-857/897 Clone PASSED: All tests Yaesu FT-857/897 BruteForce PASSED: All tests Yaesu FT-857/897 Edges PASSED: All tests Yaesu FT-857/897 Banks SKIPPED: Banks not supported Yaesu FT-857/897 (U Detect PASSED: All tests Yaesu FT-857/897 (U CopyAll PASSED: All tests Yaesu FT-857/897 (U Clone PASSED: All tests Yaesu FT-857/897 (U BruteForce PASSED: All tests Yaesu FT-857/897 (U Edges PASSED: All tests Yaesu FT-857/897 (U Banks SKIPPED: Banks not supported Yaesu FT-8800 Left Detect PASSED: All tests Yaesu FT-8800 Left CopyAll PASSED: All tests Yaesu FT-8800 Left Clone PASSED: All tests Yaesu FT-8800 Left BruteForce PASSED: All tests Yaesu FT-8800 Left Edges PASSED: All tests Yaesu FT-8800 Left Banks PASSED: All tests Yaesu FT-8800 Right Detect PASSED: All tests Yaesu FT-8800 Right CopyAll PASSED: All tests Yaesu FT-8800 Right Clone PASSED: All tests Yaesu FT-8800 Right BruteForce PASSED: All tests Yaesu FT-8800 Right Edges PASSED: All tests Yaesu FT-8800 Right Banks PASSED: All tests Yaesu FT-8900 Detect PASSED: All tests Yaesu FT-8900 CopyAll PASSED: All tests Yaesu FT-8900 Clone PASSED: All tests Yaesu FT-8900 BruteForce PASSED: All tests Yaesu FT-8900 Edges PASSED: All tests Yaesu FT-8900 Banks SKIPPED: Banks not supported Yaesu FTM-350 Left Detect PASSED: All tests Yaesu FTM-350 Left CopyAll PASSED: All tests Yaesu FTM-350 Left Clone PASSED: All tests Yaesu FTM-350 Left BruteForce PASSED: All tests Yaesu FTM-350 Left Edges PASSED: All tests Yaesu FTM-350 Left Banks SKIPPED: Banks not supported Yaesu FTM-350 Right Detect PASSED: All tests Yaesu FTM-350 Right CopyAll PASSED: All tests Yaesu FTM-350 Right Clone PASSED: All tests Yaesu FTM-350 Right BruteForce PASSED: All tests Yaesu FTM-350 Right Edges PASSED: All tests Yaesu FTM-350 Right Banks SKIPPED: Banks not supported Yaesu VX-3 Detect PASSED: All tests Yaesu VX-3 CopyAll PASSED: All tests Yaesu VX-3 Clone PASSED: All tests Yaesu VX-3 BruteForce PASSED: All tests Yaesu VX-3 Edges PASSED: All tests Yaesu VX-3 Banks SKIPPED: Banks not supported Yaesu VX-5 Detect PASSED: All tests Yaesu VX-5 CopyAll PASSED: All tests Yaesu VX-5 Clone PASSED: All tests Yaesu VX-5 BruteForce PASSED: All tests Yaesu VX-5 Edges PASSED: All tests Yaesu VX-5 Banks PASSED: All tests Yaesu VX-6 Detect PASSED: All tests Yaesu VX-6 CopyAll PASSED: All tests Yaesu VX-6 Clone PASSED: All tests Yaesu VX-6 BruteForce PASSED: All tests Yaesu VX-6 Edges PASSED: All tests Yaesu VX-6 Banks SKIPPED: Banks not supported Yaesu VX-7 Detect PASSED: All tests Yaesu VX-7 CopyAll PASSED: All tests Yaesu VX-7 Clone PASSED: All tests Yaesu VX-7 BruteForce PASSED: All tests Yaesu VX-7 Edges PASSED: All tests Yaesu VX-7 Banks PASSED: All tests Yaesu VX-8 R Detect PASSED: All tests Yaesu VX-8 R CopyAll PASSED: All tests Yaesu VX-8 R Clone PASSED: All tests Yaesu VX-8 R BruteForce PASSED: All tests Yaesu VX-8 R Edges PASSED: All tests Yaesu VX-8 R Banks PASSED: All tests ---------------------------------------------------------------------- Results: TOTAL : 318 FAILED : 0 SKIPPED: 37 PASSED : 281 CRASHED: 0 [workspace] $ /bin/sh -xe /tmp/hudson5281321369688326194.sh + nosetests -v tests/unit test_bitfield_u16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_u24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_u8 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_ul16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_ul24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_bbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_lbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_lbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_type_u16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u8 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_char (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_missing_semicolon (tests.unit.test_bitwise.TestBitwiseErrors) ... ok test_seek (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_seekto (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_struct_one_element (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_two_elements (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok split_tone_encode_test_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_none (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_none (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_fix_rounded_step_250 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_500 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_750 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_12_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_2_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_5_0 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_6_25 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_fractional_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step_fail (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_format_freq (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_bad (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_decimal (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whitespace (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whole (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_ensure_has_calls_almost_full (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_empty (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_partial (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full1 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full2 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_urcall_full (tests.unit.test_import_logic.DstarTests) ... ok test_import_bank (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffA_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffB_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_negative (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_too_big_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_uhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_errors (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_warnings (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_invalid (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_am (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_fm (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_name (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_closest (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_dst (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_src (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_same (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffA_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffB_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_auto_tone_mode_cross (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_pol (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_rx (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tone (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tsql (tests.unit.test_memedit_edits.TestEdits) ... ok test_init (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_bad_portnames (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_sorted (tests.unit.test_platform.Win32PlatformTest) ... ok test_apply_callback (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_group (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_multi (tests.unit.test_settings.TestSettingContainers) ... ok test_changed (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_boolean (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_float (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_integer (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_list (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_string (tests.unit.test_settings.TestSettingValues) ... ok test_validate_callback (tests.unit.test_settings.TestSettingValues) ... ok test_delete_hole_with_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_without_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_with_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_without_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok ---------------------------------------------------------------------- Ran 107 tests in 0.058s OK Email was triggered for: Success Sending email for trigger: Success

1 0

Re: [chirp_devel] CHIRP programming
by Ran Giladi 22 Mar '13

22 Mar '13

A) You coded in the FT1800 _model="AH023". Does this has any meaning? Should I change it? B) The log starts with the following. What does this means? Model? User selected Yaesu FT-1900R on port /dev/ttyUSB0 Clone thread started 000: 56 43 32 33 00 02 46 01 VC23..F. 008: 01 01 00 00 00 00 00 00 ........ Clone completed in 18 seconds Checksum 0000-1F49 (@1F4A): OK Clone thread ended -----Original Message----- From: esarfl(a)gmail.com [mailto:esarfl@gmail.com] On Behalf Of Tom Hayward Sent: Friday, March 22, 2013 10:46 PM To: ran(a)bgu.ac.il Subject: Re: [chirp_devel] CHIRP programming Not surprising. The FT-1900 is significantly different than the FT-1802, and you will need to rewrite the code. Don't worry about the errors for now. Like I suggested before, just save an img file, make a change on the radio, then save another img file. Use hexdump and diff to spot differences in the files and from there you can start rewriting your ft1900.py module to match what you find. Tom

2 3

Re: [chirp_devel] CHIRP programming
by Ran Giladi 22 Mar '13

22 Mar '13

Thanks. My apologies. I connected my Baofeng UV-5R to Chirp (under Linux) - and it works. Now, to the main issue - can we work on the FT-1900 on-line, to include it? Please advise. Ran PS - what should be done to see the menu? -----Original Message----- From: esarfl(a)gmail.com [mailto:esarfl@gmail.com] On Behalf Of Tom Hayward Sent: Friday, March 22, 2013 7:14 PM To: ran(a)bgu.ac.il Cc: Dan Smith Subject: Re: CHIRP programming On Fri, Mar 22, 2013 at 10:08 AM, Ran Giladi <ran(a)bgu.ac.il> wrote: > Hi, > > Finally, I managed to get a free day to work on the FT-1900; However, > when I installed version 0.3.0 - I received a blank screen (no menu, no inputs, only some CNTL-X commands (like Open), when in Windows 7), so I went to Linux (Ubuntu), and got the same result. In the previous version I got a menu and was able to choose radio. > > So, Please advise how to proceed; I'm available till Saturday afternoon, EST, to try and work with any of you, to try and include the FT-1900. If it will speed things, I can call any of you over the phone to work on-line. If you can't find the menu, Alt-D will open the Download from Radio feature. Please use the mailing list as others may have the same question. That way I only have to answer once. Tom KD7LXL

2 7

[chirp_devel] [PATCH] bitwise: allow #seek in hex (only dec was supported). #715
by Tom Hayward 22 Mar '13

22 Mar '13

# HG changeset patch # User Tom Hayward <tom(a)tomh.us> # Date 1363980584 25200 # Node ID 665669066a8d582061fa90b5a27497d8b257c51b # Parent ca76c7af25c76fc784273343c201f42c42bf09f3 bitwise: allow #seek in hex (only dec was supported). #715 diff -r ca76c7af25c7 -r 665669066a8d chirp/bitwise.py --- a/chirp/bitwise.py Thu Mar 14 16:55:57 2013 -0700 +++ b/chirp/bitwise.py Fri Mar 22 12:29:44 2013 -0700 @@ -732,20 +732,14 @@ def parse_directive(self, directive): name = directive[0][0] + value = directive[0][1][0][1] if name == "seekto": - offset = directive[0][1][0][1] - if offset.startswith("0x"): - offset = int(offset[2:], 16) - else: - offset = int(offset) #print "NOTICE: Setting offset to %i (0x%X)" % (offset, offset) - self._offset = offset + self._offset = int(value, 0) elif name == "seek": - offset = int(directive[0][1][0][1]) - self._offset += offset + self._offset += int(value, 0) elif name == "printoffset": - string = directive[0][1][0][1] - print "%s: %i (0x%08X)" % (string[1:-1], self._offset, self._offset) + print "%s: %i (0x%08X)" % (value[1:-1], self._offset, self._offset) def parse_block(self, lang): for t, d in lang:

1 0

[chirp_devel] [PATCH] [vx510] Partial driver for Vertex VX-510. #719
by Tom Hayward 22 Mar '13

22 Mar '13

# HG changeset patch # User Tom Hayward <tom(a)tomh.us> # Date 1363976117 25200 # Node ID fb84da21d22ff298657c62840f5fb644d9680b55 # Parent be93bd2fcddf2d72509f3f101a6881281e89f2b7 [vx510] Partial driver for Vertex VX-510. #719 I lost interest in finishing support for this radio, but anyone is welcome to complete this driver if they want. Download and decode works, apart from a stray byte at 0xC that I haven't found a good way to handle. It might be a checksum, but I haven't determined the algorithm to check it. Upload is untested and set_memory() is unimplemented. Nearly every byte of the img is decoded, so this shouldn't be very difficult to complete if interested. diff -r be93bd2fcddf -r fb84da21d22f chirp/vx510.py --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/chirp/vx510.py Fri Mar 22 11:15:17 2013 -0700 @@ -0,0 +1,201 @@ +# Copyright 2012 Tom Hayward <tom(a)tomh.us> +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 3 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +from chirp import chirp_common, yaesu_clone, directory +from chirp import bitwise + +# This driver is unfinished and therefore does not register itself with Chirp. +# +# Downloads should work consistently but an upload has not been attempted. +# +# There is a stray byte at 0xC in the radio download that is not present in the +# save file from the CE-21 software. This puts the first few bytes of channel 1 +# in the wrong location. A quick hack to fix the subsequent channels was to +# insert the #seekto dynamically, but this does nothing to fix reading of +# channel 1 (memory[0]). +MEM_FORMAT = """ +u8 unknown1[6]; +u8 prioritych; + +#seekto %d; +struct { + u8 empty:1, + txinhibit:1, + tot:1, + low_power:1, + bclo:1, + btlo:1, + skip:1, + pwrsave:1; + u8 unknown2:5, + narrow:1, + unknown2b:2; + u24 name; + u8 ctone; + u8 rtone; + u8 unknown3; + bbcd freq_rx[3]; + bbcd freq_tx[3]; +} memory[32]; + +char imgname[10]; +""" + +STEPS = [5.0, 6.25] +CHARSET = "".join([chr(x) for x in range(ord("0"), ord("9")+1)] + + [chr(x) for x in range(ord("A"), ord("Z")+1)]) + "<=>*+-\/_ " +TONES = list(chirp_common.TONES) +TONES.remove(165.5) +TONES.remove(171.3) +TONES.remove(177.3) +POWER_LEVELS = [chirp_common.PowerLevel("Hi", watts=5.00), + chirp_common.PowerLevel("Low", watts=1.0)] + + +# @directory.register +class VX510Radio(yaesu_clone.YaesuCloneModeRadio): + """Vertex VX-510V""" + BAUD_RATE = 9600 + VENDOR = "Vertex Standard" + MODEL = "VX-510V" + + _model = "" + _memsize = 470 + _block_lengths = [10, 460] + _block_size = 8 + + def _checksums(self): + return [] + # These checksums don't pass, so the alg might be different than Yaesu. + # return [yaesu_clone.YaesuChecksum(0, self._memsize - 2)] + # return [yaesu_clone.YaesuChecksum(0, 10), + # yaesu_clone.YaesuChecksum(12, self._memsize - 1)] + + def get_features(self): + rf = chirp_common.RadioFeatures() + rf.can_odd_split = True + rf.has_bank = False + rf.has_ctone = True + rf.has_cross = True + rf.has_rx_dtcs = True + rf.has_dtcs_polarity = False + rf.valid_tmodes = ["", "Tone", "TSQL", "DTCS", "Cross"] + rf.valid_cross_modes = ["Tone->Tone", "Tone->DTCS", "DTCS->Tone", + "->Tone", "->DTCS", "DTCS->", "DTCS->DTCS"] + rf.valid_modes = ["FM", "NFM"] + rf.valid_duplexes = ["", "-", "+", "split", "off"] + rf.memory_bounds = (1, 32) + rf.valid_bands = [(13600000, 174000000)] + rf.valid_skips = ["", "S"] + rf.valid_power_levels = POWER_LEVELS + rf.valid_name_length = 4 + rf.valid_characters = CHARSET + return rf + + def process_mmap(self): + self._memobj = bitwise.parse(MEM_FORMAT % 0xA, self._mmap) + + def get_raw_memory(self, number): + return repr(self._memobj.memory[number-1]) + + def get_memory(self, number): + mem = chirp_common.Memory() + mem.number = number + + _mem = self._memobj.memory[number-1] + + mem.empty = _mem.empty + mem.freq = chirp_common.fix_rounded_step(int(_mem.freq_rx) * 1000) + + for i in range(0, 4): + index = (_mem.name >> (i*6)) & 0x3F + mem.name += CHARSET[index] + + freq_tx = chirp_common.fix_rounded_step(int(_mem.freq_tx) * 1000) + if _mem.txinhibit: + mem.duplex = "off" + elif mem.freq == freq_tx: + mem.duplex = "" + mem.offset = 0 + elif 144000000 <= mem.freq < 148000000: + mem.duplex = "+" if freq_tx > mem.freq else "-" + mem.offset = abs(mem.freq - freq_tx) + else: + mem.duplex = "split" + mem.offset = freq_tx + + mem.mode = _mem.narrow and "NFM" or "FM" + mem.power = POWER_LEVELS[_mem.low_power] + + rtone = int(_mem.rtone) + ctone = int(_mem.ctone) + tmode_tx = tmode_rx = "" + + if rtone & 0x80: + tmode_tx = "DTCS" + mem.dtcs = chirp_common.DTCS_CODES[int(rtone) - 0x80] + elif rtone: + tmode_tx = "Tone" + mem.rtone = TONES[rtone - 1] + if not ctone: + # not used, but this is a better default than 88.5 + mem.ctone = TONES[rtone - 1] + + if ctone & 0x80: + tmode_rx = "DTCS" + mem.rx_dtcs = chirp_common.DTCS_CODES[int(ctone) - 0x80] + elif ctone: + tmode_rx = "Tone" + mem.ctone = TONES[ctone - 1] + + if tmode_tx == "Tone" and not tmode_rx: + mem.tmode = "Tone" + elif tmode_tx == tmode_rx and tmode_tx == "Tone" and mem.rtone == mem.ctone: + mem.tmode = "TSQL" + elif tmode_tx == tmode_rx and tmode_tx == "DTCS" and mem.dtcs == mem.rx_dtcs: + mem.tmode = "DTCS" + elif tmode_rx or tmode_tx: + mem.tmode = "Cross" + mem.cross_mode = "%s->%s" % (tmode_tx, tmode_rx) + + mem.skip = _mem.skip and "S" or "" + + return mem + + @classmethod + def match_model(cls, filedata, filename): + return len(filedata) == cls._memsize + + +# @directory.register +class VX510File(VX510Radio, chirp_common.FileBackedRadio): + """Vertex CE-21 File""" + VENDOR = "Vertex Standard" + MODEL = "CE-21 File" + + _model = "" + _memsize = 664 + + def _checksums(self): + return [yaesu_clone.YaesuChecksum(0, self._memsize - 1)] + + def process_mmap(self): + # CE-21 file is missing the 0xC byte, probably a checksum. + # It's not a YaesuChecksum. + self._memobj = bitwise.parse(MEM_FORMAT % 0x9, self._mmap) + + @classmethod + def match_model(cls, filedata, filename): + return len(filedata) == cls._memsize

1 0

[chirp_devel] [PATCH] bitwise: allow #seek in hex (only dec was supported). #715
by Tom Hayward 19 Mar '13

19 Mar '13

# HG changeset patch # User Tom Hayward <tom(a)tomh.us> # Date 1363712827 25200 # Node ID f6e4c52e754b5fec9c79f63b08bac635f2f83251 # Parent f5b8a743705c62b509a496ff811feb069b5b4926 bitwise: allow #seek in hex (only dec was supported). #715 diff -r f5b8a743705c -r f6e4c52e754b chirp/bitwise.py --- a/chirp/bitwise.py Sun Mar 03 13:48:01 2013 -0800 +++ b/chirp/bitwise.py Tue Mar 19 10:07:07 2013 -0700 @@ -745,20 +745,19 @@ def parse_directive(self, directive): name = directive[0][0] + offset_str = directive[0][1][0][1] + if offset_str.startswith("0x"): + offset = int(offset_str[2:], 16) + else: + offset = int(offset_str) + if name == "seekto": - offset = directive[0][1][0][1] - if offset.startswith("0x"): - offset = int(offset[2:], 16) - else: - offset = int(offset) #print "NOTICE: Setting offset to %i (0x%X)" % (offset, offset) self._offset = offset elif name == "seek": - offset = int(directive[0][1][0][1]) self._offset += offset elif name == "printoffset": - string = directive[0][1][0][1] - print "%s: %i (0x%08X)" % (string[1:-1], self._offset, self._offset) + print "%s: %i (0x%08X)" % (offset_str[1:-1], self._offset, self._offset) def parse_block(self, lang): for t, d in lang:

1 0

[chirp_devel] Disable RTS?
by Dean Gibson AE7Q 16 Mar '13

16 Mar '13

OK, I looked for this in the help and FAQ, but did not find it. That surprised me, because I thought it would be a prior issue. A few years ago, I found a Radio Shack cable that worked with Icom radios in CI-V mode. Only problem is, it requires DTR on and RTS *off* (and works that way with Ham Radio Deluxe). Is there a way to configure RTS to stay off, when communicating with certain RS-23s ports? -- Dean

1 0

[chirp_devel] Quansheng TG-UV2
by The Silver Fox 15 Mar '13

15 Mar '13

Anyone want to volunteer to modify chirp for the Quansheng. I will ship my radio and some support documentation to whomever volunteers. 73, Alan - W6ARH It's far, far away and way, way afar, It's over the moon and the sea, And wherever you are going, That's wherever you are And nobody knows it but me. -Patrick O'Leary

3 2