- Developers - lists.chirpmyradio.com

[chirp_devel] Request help with RIT programming
by Jim Unroe 23 Dec '13

23 Dec '13

I am working with a radio that has a RIT setting. It goes from -7 to +7 and are stored in single byte. The way they are stored, I've not seen before. Here's what they look like. F9 = -7 FA = -6 FB = -5 FC = -4 FD = -3 FE = -2 FF = -1 00 = 0 01 = +1 02 = +2 03 = +3 04 = +4 05 = +5 06 = +6 07 = +7 I'm sure this is probably simple for some of you Python gurus, but I'm not seeing an easy solution. What would be a good way to implement this into my CHIRP driver. Thanks, Jim KC9HI

3 5

[chirp_devel] Improving Chirp LiveCD
by B Giff 22 Dec '13

22 Dec '13

Team, This isn't specifically a Chirp dev question, but you will be my best source of information. I am updating the Chirp LiveCD and would like the cable detection to be a lot more robust. To make this happen, I need info on how Linux detects the chipsets. If you would please, in Linux, plug your programming cable in, open a terminal window and run: dmesg | grep tty Find the line for your cable and post it along with the type of cable. This is the output for a Prolific PL2303 based cable: [ 180.547070] usb 2-1.3: pl2303 converter now attached to ttyUSB0 And this one is for a Silicon Labs CP210x cable: [ 1655.773564] usb 3-1: cp210x converter now attached to ttyUSB0 Those are the only two cables I have info for, so any other cables would be appreciated. Thanks in advance. Bob

4 3

[chirp_devel] Build test results: Successful
by Build System 17 Dec '13

17 Dec '13

Tested changes: [Dan Smith <dsmith(a)danplanet.com>] Fix unquoted string in checkpatch.sh Related to the commit message from #1309 [Jim Unroe <rock.unroe(a)gmail.com>] [UV-B6] Add * and # as valid DTMF characters for PTT-ID bug #1309 [Tom Hayward <tom(a)tomh.us>] [ft60] Fix fractional step frequency encoding. #1273 [Jens Jensen <kd4tjx(a)yahoo.com>] [ft90] further relax timings for wider compatibility #1187 Full log: [...truncated 11 lines...] [workspace] $ /bin/sh -xe /tmp/hudson8753425708229903952.sh + ./run_all_tests.sh test_bit_array (tests.unit.test_bitwise.TestBitType) ... ok test_bit_array_fail (tests.unit.test_bitwise.TestBitType) ... ok test_bitfield_u16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_u24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_u8 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_ul16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_ul24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_bbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_lbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_lbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_int_array (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u8 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_char (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string_wrong_length (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_comment_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok test_comment_inline_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok test_missing_semicolon (tests.unit.test_bitwise.TestBitwiseErrors) ... ok test_seek (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_seekto (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_struct_one_element (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_two_elements (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_writes (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok split_tone_encode_test_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_none (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_none (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_fix_rounded_step_250 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_500 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_750 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_12_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_2_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_5_0 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_6_25 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_fractional_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step_fail (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_format_freq (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_bad (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_decimal (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whitespace (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whole (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_ensure_has_calls_almost_full (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_empty (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_partial (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full1 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full2 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_urcall_full (tests.unit.test_import_logic.DstarTests) ... ok test_import_bank (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffA_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffB_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_negative (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_too_big_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_uhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_errors (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_warnings (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_invalid (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_am (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_fm (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_name (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_closest (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_dst (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_src (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_same (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffA_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffB_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModelIndexInterface) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_icom_bank (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_index_bounds (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_next_mapping_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_auto_tone_mode_cross (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_pol (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_rx (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tone (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tsql (tests.unit.test_memedit_edits.TestEdits) ... ok test_init (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_bad_portnames (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_sorted (tests.unit.test_platform.Win32PlatformTest) ... ok test_apply_callback (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_group (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_multi (tests.unit.test_settings.TestSettingContainers) ... ok test_changed (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_boolean (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_float (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_integer (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_list (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_string (tests.unit.test_settings.TestSettingValues) ... ok test_validate_callback (tests.unit.test_settings.TestSettingValues) ... ok test_delete_hole_with_all (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_all_full (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_without_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_with_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_without_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok ---------------------------------------------------------------------- Ran 150 tests in 0.056s OK Registered Icom_IC-2820H = IC2820Radio Registered TYT_TH-UVF8D = TYTUVF8DRadio Registered AnyTone_5888UV = AnyTone5888UVRadio Registered Intek_HR-2040 = IntekHR2040Radio Registered Icom_IC-2200H = IC2200Radio Registered Yaesu_FT-2800M = FT2800Radio Registered Yaesu_VX-3 = VX3Radio Registered Icom_IC-2100H = IC2100Radio Registered Yaesu_FTM-350 = FTM350Radio Registered Icom_IC-91_92AD_ICF_File = IC9xICFRadio Registered Icom_IC-V82_U82 = ICx8xRadio Registered Yaesu_VX-6 = VX6Radio Registered Yaesu_VX-5 = VX5Radio Registered Yaesu_FT-60 = FT60Radio Registered Yaesu_VX-7 = VX7Radio Registered Baofeng_UV-5R = BaofengUV5R Registered Baofeng_F-11 = BaofengF11Radio Registered Baofeng_UV-82 = BaofengUV82Radio Registered Baojie_BJ-UV55 = BaojieBJUV55Radio Registered Yaesu_FT-1802M = FT1802Radio Registered Kenwood_TK-7102 = KenwoodTK7102Radio Registered Kenwood_TK-8102 = KenwoodTK8102Radio Registered Kenwood_TK-7108 = KenwoodTK7108Radio Registered Kenwood_TK-8108 = KenwoodTK8108Radio Registered Icom_ID-31A = ID31Radio Registered Icom_ID-51A = ID51Radio Registered Icom_IC-2720H = IC2720Radio Registered Icom_IC-T8A = ICT8ARadio Registered Wouxun_KG-UVD1P = KGUVD1PRadio Registered Wouxun_KG-UV6 = KGUV6DRadio Registered Wouxun_KG-816 = KG816Radio Registered Wouxun_KG-818 = KG818Radio Registered TYT_TH-UVF1 = TYTTHUVF1Radio Registered Yaesu_FT-90 = FT90Radio Registered Generic_CSV = CSVRadio Registered RT_Systems_CSV = RTCSVRadio Registered Kenwood_ITM = ITMRadio Registered Alinco_DR03T = DR03Radio Registered Alinco_DR06T = DR06Radio Registered Alinco_DR135T = DR135Radio Registered Alinco_DR235T = DR235Radio Registered Alinco_DR435T = DR435Radio Registered Alinco_DJ596 = DJ596Radio Registered Jetstream_JT220M = JT220MRadio Registered Alinco_DJ175 = DJ175Radio Registered Kenwood_TH-D7 = THD7Radio Registered Kenwood_TH-D7G = THD7GRadio Registered Kenwood_TM-D700 = TMD700Radio Registered Kenwood_TM-V7 = TMV7Radio Registered Kenwood_TM-G707 = TMG707Radio Registered Kenwood_TH-G71 = THG71Radio Registered Kenwood_TH-F6 = THF6ARadio Registered Kenwood_TH-F7 = THF7ERadio Registered Kenwood_TM-D710 = TMD710Radio Registered Kenwood_TH-D72_live_mode = THD72Radio Registered Kenwood_TM-V71 = TMV71Radio Registered Kenwood_TH-K2 = THK2Radio Registered Kenwood_TM-271 = TM271Radio Registered Kenwood_TM-471 = TM471Radio Registered Yaesu_VX-8_R = VX8Radio Registered Yaesu_VX-8_DR = VX8DRadio Registered Yaesu_VX-8_GE = VX8GERadio Registered Icom_IC-T7H = ICT7HRadio Registered Icom_IC-Q7A = ICQ7Radio Registered Baofeng_UV-B5 = BaofengUVB5 Registered Generic_XML = XMLRadio Registered Kenwood_HMK = HMKRadio Registered Kenwood_TH-D72_clone_mode = THD72Radio Registered Icom_IC-91_92AD = IC9xRadio Registered Icom_IC-T70 = ICT70Radio Registered Icom_IC-208H = IC208Radio Registered Icom_ID-800H_v2 = ID800v2Radio Registered Icom_7200 = Icom7200Radio Registered Icom_7000 = Icom7000Radio Registered Icom_746 = Icom746Radio Registered ARRL_Travel_Plus = TpeRadio Registered Vertex_Standard_VXA-700 = VXA700Radio Registered Icom_IC-W32A = ICW32ARadio Registered Baofeng_UV-3R = UV3RRadio Registered Yaesu_VX-2 = VX2Radio Registered Puxing_PX-777 = Puxing777Radio Registered Puxing_PX-2R = Puxing2RRadio Registered Baofeng_BF-888 = H777Radio Registered Yaesu_FT-7800 = FT7800Radio Registered Yaesu_FT-8800 = FT8800Radio Registered Yaesu_FT-8900 = FT8900Radio Registered Yaesu_FT-817 = FT817Radio Registered Yaesu_FT-817ND = FT817NDRadio Registered Yaesu_FT-817ND_US = FT817NDUSRadio Registered Yaesu_FT-857_897 = FT857Radio Registered Yaesu_FT-857_897_US = FT857USRadio Registered Icom_ID-880H = ID880Radio Registered Icom_ID-80H = ID80Radio Registered TYT_TH-UV3R = TYTUV3RRadio Alinco DJ175 Detect PASSED: All tests Alinco DJ175 CopyAll PASSED: All tests Alinco DJ175 Clone PASSED: All tests Alinco DJ175 BruteForce PASSED: All tests Alinco DJ175 Edges PASSED: All tests Alinco DJ175 Banks SKIPPED: Banks not supported Alinco DJ596 Detect PASSED: All tests Alinco DJ596 CopyAll PASSED: All tests Alinco DJ596 Clone PASSED: All tests Alinco DJ596 BruteForce PASSED: All tests Alinco DJ596 Edges PASSED: All tests Alinco DJ596 Banks SKIPPED: Banks not supported Alinco DR235T Detect PASSED: All tests Alinco DR235T CopyAll PASSED: All tests Alinco DR235T Clone PASSED: All tests Alinco DR235T BruteForce PASSED: All tests Alinco DR235T Edges PASSED: All tests Alinco DR235T Banks SKIPPED: Banks not supported Baofeng BF-888 Detect PASSED: All tests Baofeng BF-888 CopyAll PASSED: All tests Baofeng BF-888 Clone PASSED: All tests Baofeng BF-888 BruteForce PASSED: All tests Baofeng BF-888 Edges PASSED: All tests Baofeng BF-888 Banks SKIPPED: Banks not supported Baofeng F-11 Detect PASSED: All tests Baofeng F-11 CopyAll PASSED: All tests Baofeng F-11 Clone PASSED: All tests Baofeng F-11 BruteForce PASSED: All tests Baofeng F-11 Edges PASSED: All tests Baofeng F-11 Banks SKIPPED: Banks not supported Baofeng UV-3R Detect PASSED: All tests Baofeng UV-3R CopyAll PASSED: All tests Baofeng UV-3R Clone PASSED: All tests Baofeng UV-3R BruteForce PASSED: All tests Baofeng UV-3R Edges PASSED: All tests Baofeng UV-3R Banks SKIPPED: Banks not supported Baofeng UV-5R Detect PASSED: All tests Baofeng UV-5R CopyAll PASSED: All tests Baofeng UV-5R Clone PASSED: All tests Baofeng UV-5R BruteForce PASSED: All tests Baofeng UV-5R Edges PASSED: All tests Baofeng UV-5R Banks SKIPPED: Banks not supported Baofeng UV-B5 Detect PASSED: All tests Baofeng UV-B5 CopyAll PASSED: All tests Baofeng UV-B5 Clone PASSED: All tests Baofeng UV-B5 BruteForce PASSED: All tests Baofeng UV-B5 Edges PASSED: All tests Baofeng UV-B5 Banks SKIPPED: Banks not supported Icom IC-208H Detect PASSED: All tests Icom IC-208H CopyAll PASSED: All tests Icom IC-208H Clone PASSED: All tests Icom IC-208H BruteForce PASSED: All tests Icom IC-208H Edges PASSED: All tests Icom IC-208H Banks PASSED: All tests Icom IC-2100H Detect PASSED: All tests Icom IC-2100H CopyAll PASSED: All tests Icom IC-2100H Clone PASSED: All tests Icom IC-2100H BruteForce PASSED: All tests Icom IC-2100H Edges PASSED: All tests Icom IC-2100H Banks SKIPPED: Banks not supported Icom IC-2200H Detect PASSED: All tests Icom IC-2200H CopyAll PASSED: All tests Icom IC-2200H Clone PASSED: All tests Icom IC-2200H BruteForce PASSED: All tests Icom IC-2200H Edges PASSED: All tests Icom IC-2200H Banks PASSED: All tests Icom IC-2720H Detect PASSED: All tests Icom IC-2720H CopyAll PASSED: All tests Icom IC-2720H Clone PASSED: All tests Icom IC-2720H BruteForce PASSED: All tests Icom IC-2720H Edges PASSED: All tests Icom IC-2720H Banks PASSED: All tests Icom IC-2820H Detect PASSED: All tests Icom IC-2820H CopyAll PASSED: All tests Icom IC-2820H Clone PASSED: All tests Icom IC-2820H BruteForce PASSED: All tests Icom IC-2820H Edges PASSED: All tests Icom IC-2820H Banks PASSED: All tests Icom IC-Q7A Detect PASSED: All tests Icom IC-Q7A CopyAll PASSED: All tests Icom IC-Q7A Clone PASSED: All tests Icom IC-Q7A BruteForce PASSED: All tests Icom IC-Q7A Edges PASSED: All tests Icom IC-Q7A Banks SKIPPED: Banks not supported Icom IC-T70 Detect PASSED: All tests Icom IC-T70 CopyAll PASSED: All tests Icom IC-T70 Clone PASSED: All tests Icom IC-T70 BruteForce PASSED: All tests Icom IC-T70 Edges PASSED: All tests Icom IC-T70 Banks PASSED: All tests Icom IC-T7H Detect PASSED: All tests Icom IC-T7H CopyAll PASSED: All tests Icom IC-T7H Clone PASSED: All tests Icom IC-T7H BruteForce PASSED: All tests Icom IC-T7H Edges PASSED: All tests Icom IC-T7H Banks SKIPPED: Banks not supported Icom IC-T8A Detect PASSED: All tests Icom IC-T8A CopyAll PASSED: All tests Icom IC-T8A Clone PASSED: All tests Icom IC-T8A BruteForce PASSED: All tests Icom IC-T8A Edges PASSED: All tests Icom IC-T8A Banks SKIPPED: Banks not supported Icom IC-V82/U82 Detect PASSED: All tests Icom IC-V82/U82 CopyAll PASSED: All tests Icom IC-V82/U82 Clone PASSED: All tests Icom IC-V82/U82 BruteForce PASSED: All tests Icom IC-V82/U82 Edges PASSED: All tests Icom IC-V82/U82 Banks PASSED: All tests Icom IC-W32A VHF Detect PASSED: All tests Icom IC-W32A VHF CopyAll PASSED: All tests Icom IC-W32A VHF Clone PASSED: All tests Icom IC-W32A VHF BruteForce PASSED: All tests Icom IC-W32A VHF Edges PASSED: All tests Icom IC-W32A VHF Banks SKIPPED: Banks not supported Icom IC-W32A UHF Detect PASSED: All tests Icom IC-W32A UHF CopyAll PASSED: All tests Icom IC-W32A UHF Clone PASSED: All tests Icom IC-W32A UHF BruteForce PASSED: All tests Icom IC-W32A UHF Edges PASSED: All tests Icom IC-W32A UHF Banks SKIPPED: Banks not supported Icom ID-31A Detect PASSED: All tests Icom ID-31A CopyAll PASSED: All tests Icom ID-31A Clone PASSED: All tests Icom ID-31A BruteForce PASSED: All tests Icom ID-31A Edges PASSED: All tests Icom ID-31A Banks PASSED: All tests Icom ID-51A Detect PASSED: All tests Icom ID-51A CopyAll PASSED: All tests Icom ID-51A Clone PASSED: All tests Icom ID-51A BruteForce PASSED: All tests Icom ID-51A Edges PASSED: All tests Icom ID-51A Banks PASSED: All tests Icom ID-800H v2 Detect PASSED: All tests Icom ID-800H v2 CopyAll PASSED: All tests Icom ID-800H v2 Clone PASSED: All tests Icom ID-800H v2 BruteForce PASSED: All tests Icom ID-800H v2 Edges PASSED: All tests Icom ID-800H v2 Banks PASSED: All tests Icom ID-880H Detect PASSED: All tests Icom ID-880H CopyAll PASSED: All tests Icom ID-880H Clone PASSED: All tests Icom ID-880H BruteForce PASSED: All tests Icom ID-880H Edges PASSED: All tests Icom ID-880H Banks PASSED: All tests Jetstream JT220M Detect PASSED: All tests Jetstream JT220M CopyAll PASSED: All tests Jetstream JT220M Clone PASSED: All tests Jetstream JT220M BruteForce PASSED: All tests Jetstream JT220M Edges PASSED: All tests Jetstream JT220M Banks SKIPPED: Banks not supported Kenwood TH-D72 (clone Detect PASSED: All tests Kenwood TH-D72 (clone CopyAll PASSED: All tests Kenwood TH-D72 (clone Clone PASSED: All tests Kenwood TH-D72 (clone BruteForce PASSED: All tests Kenwood TH-D72 (clone Edges PASSED: All tests Kenwood TH-D72 (clone Banks SKIPPED: Banks not supported Kenwood TK-8102 Detect PASSED: All tests Kenwood TK-8102 CopyAll PASSED: All tests Kenwood TK-8102 Clone PASSED: All tests Kenwood TK-8102 BruteForce PASSED: All tests Kenwood TK-8102 Edges PASSED: All tests Kenwood TK-8102 Banks SKIPPED: Banks not supported Puxing PX-2R Detect PASSED: All tests Puxing PX-2R CopyAll PASSED: All tests Puxing PX-2R Clone PASSED: All tests Puxing PX-2R BruteForce PASSED: All tests Puxing PX-2R Edges PASSED: All tests Puxing PX-2R Banks SKIPPED: Banks not supported Puxing PX-777 Detect PASSED: All tests Puxing PX-777 CopyAll PASSED: All tests Puxing PX-777 Clone PASSED: All tests Puxing PX-777 BruteForce PASSED: All tests Puxing PX-777 Edges PASSED: All tests Puxing PX-777 Banks SKIPPED: Banks not supported TYT TH-UV3R Detect PASSED: All tests TYT TH-UV3R CopyAll PASSED: All tests TYT TH-UV3R Clone PASSED: All tests TYT TH-UV3R BruteForce PASSED: All tests TYT TH-UV3R Edges PASSED: All tests TYT TH-UV3R Banks SKIPPED: Banks not supported TYT TH-UVF1 Detect PASSED: All tests TYT TH-UVF1 CopyAll PASSED: All tests TYT TH-UVF1 Clone PASSED: All tests TYT TH-UVF1 BruteForce PASSED: All tests TYT TH-UVF1 Edges PASSED: All tests TYT TH-UVF1 Banks SKIPPED: Banks not supported Vertex VXA-700 Detect PASSED: All tests Vertex VXA-700 CopyAll PASSED: All tests Vertex VXA-700 Clone PASSED: All tests Vertex VXA-700 BruteForce PASSED: All tests Vertex VXA-700 Edges PASSED: All tests Vertex VXA-700 Banks SKIPPED: Banks not supported Wouxun KG-816 Detect PASSED: All tests Wouxun KG-816 CopyAll PASSED: All tests Wouxun KG-816 Clone PASSED: All tests Wouxun KG-816 BruteForce PASSED: All tests Wouxun KG-816 Edges PASSED: All tests Wouxun KG-816 Banks SKIPPED: Banks not supported Wouxun KG-818 Detect PASSED: All tests Wouxun KG-818 CopyAll PASSED: All tests Wouxun KG-818 Clone PASSED: All tests Wouxun KG-818 BruteForce PASSED: All tests Wouxun KG-818 Edges PASSED: All tests Wouxun KG-818 Banks SKIPPED: Banks not supported Wouxun KG-UV6 Detect PASSED: All tests Wouxun KG-UV6 CopyAll PASSED: All tests Wouxun KG-UV6 Clone PASSED: All tests Wouxun KG-UV6 BruteForce PASSED: All tests Wouxun KG-UV6 Edges PASSED: All tests Wouxun KG-UV6 Banks SKIPPED: Banks not supported Wouxun KG-UVD1P Detect PASSED: All tests Wouxun KG-UVD1P CopyAll PASSED: All tests Wouxun KG-UVD1P Clone PASSED: All tests Wouxun KG-UVD1P BruteForce PASSED: All tests Wouxun KG-UVD1P Edges PASSED: All tests Wouxun KG-UVD1P Banks SKIPPED: Banks not supported Yaesu FT-1802M Detect PASSED: All tests Yaesu FT-1802M CopyAll PASSED: All tests Yaesu FT-1802M Clone PASSED: All tests Yaesu FT-1802M BruteForce PASSED: All tests Yaesu FT-1802M Edges PASSED: All tests Yaesu FT-1802M Banks SKIPPED: Banks not supported Yaesu FT-2800M Detect PASSED: All tests Yaesu FT-2800M CopyAll PASSED: All tests Yaesu FT-2800M Clone PASSED: All tests Yaesu FT-2800M BruteForce PASSED: All tests Yaesu FT-2800M Edges PASSED: All tests Yaesu FT-2800M Banks SKIPPED: Banks not supported Yaesu FT-60 Detect PASSED: All tests Yaesu FT-60 CopyAll PASSED: All tests Yaesu FT-60 Clone PASSED: All tests Yaesu FT-60 BruteForce PASSED: All tests Yaesu FT-60 Edges PASSED: All tests Yaesu FT-60 Banks SKIPPED: Banks not supported Yaesu FT-7800 Detect PASSED: All tests Yaesu FT-7800 CopyAll PASSED: All tests Yaesu FT-7800 Clone PASSED: All tests Yaesu FT-7800 BruteForce PASSED: All tests Yaesu FT-7800 Edges PASSED: All tests Yaesu FT-7800 Banks PASSED: All tests Yaesu FT-817 Detect PASSED: All tests Yaesu FT-817 CopyAll PASSED: All tests Yaesu FT-817 Clone PASSED: All tests Yaesu FT-817 BruteForce PASSED: All tests Yaesu FT-817 Edges PASSED: All tests Yaesu FT-817 Banks SKIPPED: Banks not supported Yaesu FT-817ND Detect PASSED: All tests Yaesu FT-817ND CopyAll PASSED: All tests Yaesu FT-817ND Clone PASSED: All tests Yaesu FT-817ND BruteForce PASSED: All tests Yaesu FT-817ND Edges PASSED: All tests Yaesu FT-817ND Banks SKIPPED: Banks not supported Yaesu FT-817ND (US) Detect PASSED: All tests Yaesu FT-817ND (US) CopyAll PASSED: All tests Yaesu FT-817ND (US) Clone PASSED: All tests Yaesu FT-817ND (US) BruteForce PASSED: All tests Yaesu FT-817ND (US) Edges PASSED: All tests Yaesu FT-817ND (US) Banks SKIPPED: Banks not supported Yaesu FT-857/897 Detect PASSED: All tests Yaesu FT-857/897 CopyAll PASSED: All tests Yaesu FT-857/897 Clone PASSED: All tests Yaesu FT-857/897 BruteForce PASSED: All tests Yaesu FT-857/897 Edges PASSED: All tests Yaesu FT-857/897 Banks SKIPPED: Banks not supported Yaesu FT-857/897 (U Detect PASSED: All tests Yaesu FT-857/897 (U CopyAll PASSED: All tests Yaesu FT-857/897 (U Clone PASSED: All tests Yaesu FT-857/897 (U BruteForce PASSED: All tests Yaesu FT-857/897 (U Edges PASSED: All tests Yaesu FT-857/897 (U Banks SKIPPED: Banks not supported Yaesu FT-8800 Left Detect PASSED: All tests Yaesu FT-8800 Left CopyAll PASSED: All tests Yaesu FT-8800 Left Clone PASSED: All tests Yaesu FT-8800 Left BruteForce PASSED: All tests Yaesu FT-8800 Left Edges PASSED: All tests Yaesu FT-8800 Left Banks PASSED: All tests Yaesu FT-8800 Right Detect PASSED: All tests Yaesu FT-8800 Right CopyAll PASSED: All tests Yaesu FT-8800 Right Clone PASSED: All tests Yaesu FT-8800 Right BruteForce PASSED: All tests Yaesu FT-8800 Right Edges PASSED: All tests Yaesu FT-8800 Right Banks PASSED: All tests Yaesu FT-8900 Detect PASSED: All tests Yaesu FT-8900 CopyAll PASSED: All tests Yaesu FT-8900 Clone PASSED: All tests Yaesu FT-8900 BruteForce PASSED: All tests Yaesu FT-8900 Edges PASSED: All tests Yaesu FT-8900 Banks SKIPPED: Banks not supported Yaesu FTM-350 Left Detect PASSED: All tests Yaesu FTM-350 Left CopyAll PASSED: All tests Yaesu FTM-350 Left Clone PASSED: All tests Yaesu FTM-350 Left BruteForce PASSED: All tests Yaesu FTM-350 Left Edges PASSED: All tests Yaesu FTM-350 Left Banks SKIPPED: Banks not supported Yaesu FTM-350 Right Detect PASSED: All tests Yaesu FTM-350 Right CopyAll PASSED: All tests Yaesu FTM-350 Right Clone PASSED: All tests Yaesu FTM-350 Right BruteForce PASSED: All tests Yaesu FTM-350 Right Edges PASSED: All tests Yaesu FTM-350 Right Banks SKIPPED: Banks not supported Yaesu VX-2 Detect PASSED: All tests Yaesu VX-2 CopyAll PASSED: All tests Yaesu VX-2 Clone PASSED: All tests Yaesu VX-2 BruteForce PASSED: All tests Yaesu VX-2 Edges PASSED: All tests Yaesu VX-2 Banks PASSED: All tests Yaesu VX-3 Detect PASSED: All tests Yaesu VX-3 CopyAll PASSED: All tests Yaesu VX-3 Clone PASSED: All tests Yaesu VX-3 BruteForce PASSED: All tests Yaesu VX-3 Edges PASSED: All tests Yaesu VX-3 Banks PASSED: All tests Yaesu VX-5 Detect PASSED: All tests Yaesu VX-5 CopyAll PASSED: All tests Yaesu VX-5 Clone PASSED: All tests Yaesu VX-5 BruteForce PASSED: All tests Yaesu VX-5 Edges PASSED: All tests Yaesu VX-5 Banks PASSED: All tests Yaesu VX-6 Detect PASSED: All tests Yaesu VX-6 CopyAll PASSED: All tests Yaesu VX-6 Clone PASSED: All tests Yaesu VX-6 BruteForce PASSED: All tests Yaesu VX-6 Edges PASSED: All tests Yaesu VX-6 Banks PASSED: All tests Yaesu VX-7 Detect PASSED: All tests Yaesu VX-7 CopyAll PASSED: All tests Yaesu VX-7 Clone PASSED: All tests Yaesu VX-7 BruteForce PASSED: All tests Yaesu VX-7 Edges PASSED: All tests Yaesu VX-7 Banks PASSED: All tests Yaesu VX-8 R Detect PASSED: All tests Yaesu VX-8 R CopyAll PASSED: All tests Yaesu VX-8 R Clone PASSED: All tests Yaesu VX-8 R BruteForce PASSED: All tests Yaesu VX-8 R Edges PASSED: All tests Yaesu VX-8 R Banks PASSED: All tests ---------------------------------------------------------------------- Results: TOTAL : 336 FAILED : 0 SKIPPED: 37 PASSED : 299 CRASHED: 0 Patch 'tip' is OK ================================================ Tests OK Email was triggered for: Success Sending email for trigger: Success

1 0

[chirp_devel] [PATCH] [UV-B6] Add * and # as valid DTMF characters for PTT-ID
by Jim Unroe 17 Dec '13

17 Dec '13

# HG changeset patch # User Jim Unroe <rock.unroe(a)gmail.com> # Date 1387328402 18000 # Node ID 66030b3c2f3dae41b6e77c0ed23b6b108a233cc8 # Parent 5405a514d7d7f7d5f3baae988d734e8c0385879d [UV-B6] Add * and # as valid DTMF characters for PTT-ID bug #1309 diff -r 5405a514d7d7 -r 66030b3c2f3d chirp/uvb5.py --- a/chirp/uvb5.py Tue Dec 10 18:16:04 2013 -0800 +++ b/chirp/uvb5.py Tue Dec 17 20:00:02 2013 -0500 @@ -513,7 +513,7 @@ options[self._memobj.settings.pttid])) basic.append(rs) - dtmfchars = "0123456789ABCD" + dtmfchars = "0123456789ABCD*#" _codeobj = self._memobj.pttid.code _code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F]) val = RadioSettingValueString(0, 6, _code, False)

1 0

[chirp_devel] [PATCH] [ft60] Fix fractional step frequency encoding. #1273
by Tom Hayward 17 Dec '13

17 Dec '13

# HG changeset patch # User Tom Hayward <tom(a)tomh.us> # Date 1387319285 28800 # Node ID 890d775adfcac4acc8e552b2c65329e15f825e51 # Parent 5405a514d7d7f7d5f3baae988d734e8c0385879d [ft60] Fix fractional step frequency encoding. #1273 diff -r 5405a514d7d7 -r 890d775adfca chirp/ft60.py --- a/chirp/ft60.py Tue Dec 10 18:16:04 2013 -0800 +++ b/chirp/ft60.py Tue Dec 17 14:28:05 2013 -0800 @@ -97,11 +97,12 @@ def _encode_freq(freq): freqraw = freq / 10000 - if ((freq / 1000) % 10) == 5: - freqraw += 800000 + flags = 0x00 + if ((freq / 1000) % 10) >= 5: + flags += 0x80 if chirp_common.is_fractional_step(freq): - freqraw += 400000 - return freqraw + flags += 0x40 + return freqraw, flags MEM_FORMAT = """ @@ -290,9 +291,11 @@ _mem.used = 1 print "Wiped" - _mem.freq = _encode_freq(mem.freq) + _mem.freq, flags = _encode_freq(mem.freq) + _mem.freq[0].set_bits(flags) if mem.duplex == "split": - _mem.tx_freq = _encode_freq(mem.offset) + _mem.tx_freq, flags = _encode_freq(mem.offset) + _mem.tx_freq[0].set_bits(flags) _mem.offset = 0 else: _mem.tx_freq = 0

1 0

[chirp_devel] [ft90] further relax timings for wider compatibility #1187
by Jens J. 17 Dec '13

17 Dec '13

patch attached

1 0

[chirp_devel] Build test results: Successful
by Build System 10 Dec '13

10 Dec '13

Tested changes: [Dan Smith <dsmith(a)danplanet.com>] Avoid complaining about driver file line lengths (for the time being) Simple additions to large files like the previous few patches are hard to reject when they follow the convention in the rest of the file. Related to patches for #1167 [Jim Unroe <rock.unroe(a)gmail.com>] [UV-B5] Display of STEP Setting Issue This patch forces a valid STEP value and restores CHIRP's ability to program frequencies with a resolution of 2.5 KHz related to #1179 [Jim Unroe <rock.unroe(a)gmail.com>] [KG-UV3]Add FM Presets for Wouxun KG-UVD1P, KG-UV2 and KG-UV3 expose fm preset settings fields in memmap add FM Presets tab add FM Preset settings and other associated support related to #1167 [Jim Unroe <rock.unroe(a)gmail.com>] [KG-UV3]Add Basic Settings for Wouxun KG-UVD1P, KG-UV2 and KG-UV3 expose basic settings fields in memmap add Basic Settings tab add Basic Settings and other associated support related to #1167 Full log: [...truncated 11 lines...] [workspace] $ /bin/sh -xe /tmp/hudson7496473825040065499.sh + ./run_all_tests.sh test_bit_array (tests.unit.test_bitwise.TestBitType) ... ok test_bit_array_fail (tests.unit.test_bitwise.TestBitType) ... ok test_bitfield_u16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_u24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_u8 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_ul16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_ul24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_bbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_lbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_lbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_int_array (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u8 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_char (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string_wrong_length (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_comment_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok test_comment_inline_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok test_missing_semicolon (tests.unit.test_bitwise.TestBitwiseErrors) ... ok test_seek (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_seekto (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_struct_one_element (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_two_elements (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_writes (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok split_tone_encode_test_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_none (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_none (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_fix_rounded_step_250 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_500 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_750 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_12_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_2_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_5_0 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_6_25 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_fractional_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step_fail (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_format_freq (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_bad (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_decimal (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whitespace (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whole (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_ensure_has_calls_almost_full (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_empty (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_partial (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full1 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full2 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_urcall_full (tests.unit.test_import_logic.DstarTests) ... ok test_import_bank (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffA_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffB_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_negative (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_too_big_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_uhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_errors (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_warnings (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_invalid (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_am (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_fm (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_name (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_closest (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_dst (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_src (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_same (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffA_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffB_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModelIndexInterface) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_icom_bank (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_index_bounds (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_next_mapping_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_auto_tone_mode_cross (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_pol (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_rx (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tone (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tsql (tests.unit.test_memedit_edits.TestEdits) ... ok test_init (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_bad_portnames (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_sorted (tests.unit.test_platform.Win32PlatformTest) ... ok test_apply_callback (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_group (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_multi (tests.unit.test_settings.TestSettingContainers) ... ok test_changed (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_boolean (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_float (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_integer (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_list (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_string (tests.unit.test_settings.TestSettingValues) ... ok test_validate_callback (tests.unit.test_settings.TestSettingValues) ... ok test_delete_hole_with_all (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_all_full (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_without_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_with_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_without_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok ---------------------------------------------------------------------- Ran 150 tests in 0.067s OK Registered Icom_IC-2820H = IC2820Radio Registered TYT_TH-UVF8D = TYTUVF8DRadio Registered AnyTone_5888UV = AnyTone5888UVRadio Registered Intek_HR-2040 = IntekHR2040Radio Registered Icom_IC-2200H = IC2200Radio Registered Yaesu_FT-2800M = FT2800Radio Registered Yaesu_VX-3 = VX3Radio Registered Icom_IC-2100H = IC2100Radio Registered Yaesu_FTM-350 = FTM350Radio Registered Icom_IC-91_92AD_ICF_File = IC9xICFRadio Registered Icom_IC-V82_U82 = ICx8xRadio Registered Yaesu_VX-6 = VX6Radio Registered Yaesu_VX-5 = VX5Radio Registered Yaesu_FT-60 = FT60Radio Registered Yaesu_VX-7 = VX7Radio Registered Baofeng_UV-5R = BaofengUV5R Registered Baofeng_F-11 = BaofengF11Radio Registered Baofeng_UV-82 = BaofengUV82Radio Registered Baojie_BJ-UV55 = BaojieBJUV55Radio Registered Yaesu_FT-1802M = FT1802Radio Registered Kenwood_TK-7102 = KenwoodTK7102Radio Registered Kenwood_TK-8102 = KenwoodTK8102Radio Registered Kenwood_TK-7108 = KenwoodTK7108Radio Registered Kenwood_TK-8108 = KenwoodTK8108Radio Registered Icom_ID-31A = ID31Radio Registered Icom_ID-51A = ID51Radio Registered Icom_IC-2720H = IC2720Radio Registered Icom_IC-T8A = ICT8ARadio Registered Wouxun_KG-UVD1P = KGUVD1PRadio Registered Wouxun_KG-UV6 = KGUV6DRadio Registered Wouxun_KG-816 = KG816Radio Registered Wouxun_KG-818 = KG818Radio Registered TYT_TH-UVF1 = TYTTHUVF1Radio Registered Yaesu_FT-90 = FT90Radio Registered Generic_CSV = CSVRadio Registered RT_Systems_CSV = RTCSVRadio Registered Kenwood_ITM = ITMRadio Registered Alinco_DR03T = DR03Radio Registered Alinco_DR06T = DR06Radio Registered Alinco_DR135T = DR135Radio Registered Alinco_DR235T = DR235Radio Registered Alinco_DR435T = DR435Radio Registered Alinco_DJ596 = DJ596Radio Registered Jetstream_JT220M = JT220MRadio Registered Alinco_DJ175 = DJ175Radio Registered Kenwood_TH-D7 = THD7Radio Registered Kenwood_TH-D7G = THD7GRadio Registered Kenwood_TM-D700 = TMD700Radio Registered Kenwood_TM-V7 = TMV7Radio Registered Kenwood_TM-G707 = TMG707Radio Registered Kenwood_TH-G71 = THG71Radio Registered Kenwood_TH-F6 = THF6ARadio Registered Kenwood_TH-F7 = THF7ERadio Registered Kenwood_TM-D710 = TMD710Radio Registered Kenwood_TH-D72_live_mode = THD72Radio Registered Kenwood_TM-V71 = TMV71Radio Registered Kenwood_TH-K2 = THK2Radio Registered Kenwood_TM-271 = TM271Radio Registered Kenwood_TM-471 = TM471Radio Registered Yaesu_VX-8_R = VX8Radio Registered Yaesu_VX-8_DR = VX8DRadio Registered Yaesu_VX-8_GE = VX8GERadio Registered Icom_IC-T7H = ICT7HRadio Registered Icom_IC-Q7A = ICQ7Radio Registered Baofeng_UV-B5 = BaofengUVB5 Registered Generic_XML = XMLRadio Registered Kenwood_HMK = HMKRadio Registered Kenwood_TH-D72_clone_mode = THD72Radio Registered Icom_IC-91_92AD = IC9xRadio Registered Icom_IC-T70 = ICT70Radio Registered Icom_IC-208H = IC208Radio Registered Icom_ID-800H_v2 = ID800v2Radio Registered Icom_7200 = Icom7200Radio Registered Icom_7000 = Icom7000Radio Registered Icom_746 = Icom746Radio Registered ARRL_Travel_Plus = TpeRadio Registered Vertex_Standard_VXA-700 = VXA700Radio Registered Icom_IC-W32A = ICW32ARadio Registered Baofeng_UV-3R = UV3RRadio Registered Yaesu_VX-2 = VX2Radio Registered Puxing_PX-777 = Puxing777Radio Registered Puxing_PX-2R = Puxing2RRadio Registered Baofeng_BF-888 = H777Radio Registered Yaesu_FT-7800 = FT7800Radio Registered Yaesu_FT-8800 = FT8800Radio Registered Yaesu_FT-8900 = FT8900Radio Registered Yaesu_FT-817 = FT817Radio Registered Yaesu_FT-817ND = FT817NDRadio Registered Yaesu_FT-817ND_US = FT817NDUSRadio Registered Yaesu_FT-857_897 = FT857Radio Registered Yaesu_FT-857_897_US = FT857USRadio Registered Icom_ID-880H = ID880Radio Registered Icom_ID-80H = ID80Radio Registered TYT_TH-UV3R = TYTUV3RRadio Alinco DJ175 Detect PASSED: All tests Alinco DJ175 CopyAll PASSED: All tests Alinco DJ175 Clone PASSED: All tests Alinco DJ175 BruteForce PASSED: All tests Alinco DJ175 Edges PASSED: All tests Alinco DJ175 Banks SKIPPED: Banks not supported Alinco DJ596 Detect PASSED: All tests Alinco DJ596 CopyAll PASSED: All tests Alinco DJ596 Clone PASSED: All tests Alinco DJ596 BruteForce PASSED: All tests Alinco DJ596 Edges PASSED: All tests Alinco DJ596 Banks SKIPPED: Banks not supported Alinco DR235T Detect PASSED: All tests Alinco DR235T CopyAll PASSED: All tests Alinco DR235T Clone PASSED: All tests Alinco DR235T BruteForce PASSED: All tests Alinco DR235T Edges PASSED: All tests Alinco DR235T Banks SKIPPED: Banks not supported Baofeng BF-888 Detect PASSED: All tests Baofeng BF-888 CopyAll PASSED: All tests Baofeng BF-888 Clone PASSED: All tests Baofeng BF-888 BruteForce PASSED: All tests Baofeng BF-888 Edges PASSED: All tests Baofeng BF-888 Banks SKIPPED: Banks not supported Baofeng F-11 Detect PASSED: All tests Baofeng F-11 CopyAll PASSED: All tests Baofeng F-11 Clone PASSED: All tests Baofeng F-11 BruteForce PASSED: All tests Baofeng F-11 Edges PASSED: All tests Baofeng F-11 Banks SKIPPED: Banks not supported Baofeng UV-3R Detect PASSED: All tests Baofeng UV-3R CopyAll PASSED: All tests Baofeng UV-3R Clone PASSED: All tests Baofeng UV-3R BruteForce PASSED: All tests Baofeng UV-3R Edges PASSED: All tests Baofeng UV-3R Banks SKIPPED: Banks not supported Baofeng UV-5R Detect PASSED: All tests Baofeng UV-5R CopyAll PASSED: All tests Baofeng UV-5R Clone PASSED: All tests Baofeng UV-5R BruteForce PASSED: All tests Baofeng UV-5R Edges PASSED: All tests Baofeng UV-5R Banks SKIPPED: Banks not supported Baofeng UV-B5 Detect PASSED: All tests Baofeng UV-B5 CopyAll PASSED: All tests Baofeng UV-B5 Clone PASSED: All tests Baofeng UV-B5 BruteForce PASSED: All tests Baofeng UV-B5 Edges PASSED: All tests Baofeng UV-B5 Banks SKIPPED: Banks not supported Icom IC-208H Detect PASSED: All tests Icom IC-208H CopyAll PASSED: All tests Icom IC-208H Clone PASSED: All tests Icom IC-208H BruteForce PASSED: All tests Icom IC-208H Edges PASSED: All tests Icom IC-208H Banks PASSED: All tests Icom IC-2100H Detect PASSED: All tests Icom IC-2100H CopyAll PASSED: All tests Icom IC-2100H Clone PASSED: All tests Icom IC-2100H BruteForce PASSED: All tests Icom IC-2100H Edges PASSED: All tests Icom IC-2100H Banks SKIPPED: Banks not supported Icom IC-2200H Detect PASSED: All tests Icom IC-2200H CopyAll PASSED: All tests Icom IC-2200H Clone PASSED: All tests Icom IC-2200H BruteForce PASSED: All tests Icom IC-2200H Edges PASSED: All tests Icom IC-2200H Banks PASSED: All tests Icom IC-2720H Detect PASSED: All tests Icom IC-2720H CopyAll PASSED: All tests Icom IC-2720H Clone PASSED: All tests Icom IC-2720H BruteForce PASSED: All tests Icom IC-2720H Edges PASSED: All tests Icom IC-2720H Banks PASSED: All tests Icom IC-2820H Detect PASSED: All tests Icom IC-2820H CopyAll PASSED: All tests Icom IC-2820H Clone PASSED: All tests Icom IC-2820H BruteForce PASSED: All tests Icom IC-2820H Edges PASSED: All tests Icom IC-2820H Banks PASSED: All tests Icom IC-Q7A Detect PASSED: All tests Icom IC-Q7A CopyAll PASSED: All tests Icom IC-Q7A Clone PASSED: All tests Icom IC-Q7A BruteForce PASSED: All tests Icom IC-Q7A Edges PASSED: All tests Icom IC-Q7A Banks SKIPPED: Banks not supported Icom IC-T70 Detect PASSED: All tests Icom IC-T70 CopyAll PASSED: All tests Icom IC-T70 Clone PASSED: All tests Icom IC-T70 BruteForce PASSED: All tests Icom IC-T70 Edges PASSED: All tests Icom IC-T70 Banks PASSED: All tests Icom IC-T7H Detect PASSED: All tests Icom IC-T7H CopyAll PASSED: All tests Icom IC-T7H Clone PASSED: All tests Icom IC-T7H BruteForce PASSED: All tests Icom IC-T7H Edges PASSED: All tests Icom IC-T7H Banks SKIPPED: Banks not supported Icom IC-T8A Detect PASSED: All tests Icom IC-T8A CopyAll PASSED: All tests Icom IC-T8A Clone PASSED: All tests Icom IC-T8A BruteForce PASSED: All tests Icom IC-T8A Edges PASSED: All tests Icom IC-T8A Banks SKIPPED: Banks not supported Icom IC-V82/U82 Detect PASSED: All tests Icom IC-V82/U82 CopyAll PASSED: All tests Icom IC-V82/U82 Clone PASSED: All tests Icom IC-V82/U82 BruteForce PASSED: All tests Icom IC-V82/U82 Edges PASSED: All tests Icom IC-V82/U82 Banks PASSED: All tests Icom IC-W32A VHF Detect PASSED: All tests Icom IC-W32A VHF CopyAll PASSED: All tests Icom IC-W32A VHF Clone PASSED: All tests Icom IC-W32A VHF BruteForce PASSED: All tests Icom IC-W32A VHF Edges PASSED: All tests Icom IC-W32A VHF Banks SKIPPED: Banks not supported Icom IC-W32A UHF Detect PASSED: All tests Icom IC-W32A UHF CopyAll PASSED: All tests Icom IC-W32A UHF Clone PASSED: All tests Icom IC-W32A UHF BruteForce PASSED: All tests Icom IC-W32A UHF Edges PASSED: All tests Icom IC-W32A UHF Banks SKIPPED: Banks not supported Icom ID-31A Detect PASSED: All tests Icom ID-31A CopyAll PASSED: All tests Icom ID-31A Clone PASSED: All tests Icom ID-31A BruteForce PASSED: All tests Icom ID-31A Edges PASSED: All tests Icom ID-31A Banks PASSED: All tests Icom ID-51A Detect PASSED: All tests Icom ID-51A CopyAll PASSED: All tests Icom ID-51A Clone PASSED: All tests Icom ID-51A BruteForce PASSED: All tests Icom ID-51A Edges PASSED: All tests Icom ID-51A Banks PASSED: All tests Icom ID-800H v2 Detect PASSED: All tests Icom ID-800H v2 CopyAll PASSED: All tests Icom ID-800H v2 Clone PASSED: All tests Icom ID-800H v2 BruteForce PASSED: All tests Icom ID-800H v2 Edges PASSED: All tests Icom ID-800H v2 Banks PASSED: All tests Icom ID-880H Detect PASSED: All tests Icom ID-880H CopyAll PASSED: All tests Icom ID-880H Clone PASSED: All tests Icom ID-880H BruteForce PASSED: All tests Icom ID-880H Edges PASSED: All tests Icom ID-880H Banks PASSED: All tests Jetstream JT220M Detect PASSED: All tests Jetstream JT220M CopyAll PASSED: All tests Jetstream JT220M Clone PASSED: All tests Jetstream JT220M BruteForce PASSED: All tests Jetstream JT220M Edges PASSED: All tests Jetstream JT220M Banks SKIPPED: Banks not supported Kenwood TH-D72 (clone Detect PASSED: All tests Kenwood TH-D72 (clone CopyAll PASSED: All tests Kenwood TH-D72 (clone Clone PASSED: All tests Kenwood TH-D72 (clone BruteForce PASSED: All tests Kenwood TH-D72 (clone Edges PASSED: All tests Kenwood TH-D72 (clone Banks SKIPPED: Banks not supported Kenwood TK-8102 Detect PASSED: All tests Kenwood TK-8102 CopyAll PASSED: All tests Kenwood TK-8102 Clone PASSED: All tests Kenwood TK-8102 BruteForce PASSED: All tests Kenwood TK-8102 Edges PASSED: All tests Kenwood TK-8102 Banks SKIPPED: Banks not supported Puxing PX-2R Detect PASSED: All tests Puxing PX-2R CopyAll PASSED: All tests Puxing PX-2R Clone PASSED: All tests Puxing PX-2R BruteForce PASSED: All tests Puxing PX-2R Edges PASSED: All tests Puxing PX-2R Banks SKIPPED: Banks not supported Puxing PX-777 Detect PASSED: All tests Puxing PX-777 CopyAll PASSED: All tests Puxing PX-777 Clone PASSED: All tests Puxing PX-777 BruteForce PASSED: All tests Puxing PX-777 Edges PASSED: All tests Puxing PX-777 Banks SKIPPED: Banks not supported TYT TH-UV3R Detect PASSED: All tests TYT TH-UV3R CopyAll PASSED: All tests TYT TH-UV3R Clone PASSED: All tests TYT TH-UV3R BruteForce PASSED: All tests TYT TH-UV3R Edges PASSED: All tests TYT TH-UV3R Banks SKIPPED: Banks not supported TYT TH-UVF1 Detect PASSED: All tests TYT TH-UVF1 CopyAll PASSED: All tests TYT TH-UVF1 Clone PASSED: All tests TYT TH-UVF1 BruteForce PASSED: All tests TYT TH-UVF1 Edges PASSED: All tests TYT TH-UVF1 Banks SKIPPED: Banks not supported Vertex VXA-700 Detect PASSED: All tests Vertex VXA-700 CopyAll PASSED: All tests Vertex VXA-700 Clone PASSED: All tests Vertex VXA-700 BruteForce PASSED: All tests Vertex VXA-700 Edges PASSED: All tests Vertex VXA-700 Banks SKIPPED: Banks not supported Wouxun KG-816 Detect PASSED: All tests Wouxun KG-816 CopyAll PASSED: All tests Wouxun KG-816 Clone PASSED: All tests Wouxun KG-816 BruteForce PASSED: All tests Wouxun KG-816 Edges PASSED: All tests Wouxun KG-816 Banks SKIPPED: Banks not supported Wouxun KG-818 Detect PASSED: All tests Wouxun KG-818 CopyAll PASSED: All tests Wouxun KG-818 Clone PASSED: All tests Wouxun KG-818 BruteForce PASSED: All tests Wouxun KG-818 Edges PASSED: All tests Wouxun KG-818 Banks SKIPPED: Banks not supported Wouxun KG-UV6 Detect PASSED: All tests Wouxun KG-UV6 CopyAll PASSED: All tests Wouxun KG-UV6 Clone PASSED: All tests Wouxun KG-UV6 BruteForce PASSED: All tests Wouxun KG-UV6 Edges PASSED: All tests Wouxun KG-UV6 Banks SKIPPED: Banks not supported Wouxun KG-UVD1P Detect PASSED: All tests Wouxun KG-UVD1P CopyAll PASSED: All tests Wouxun KG-UVD1P Clone PASSED: All tests Wouxun KG-UVD1P BruteForce PASSED: All tests Wouxun KG-UVD1P Edges PASSED: All tests Wouxun KG-UVD1P Banks SKIPPED: Banks not supported Yaesu FT-1802M Detect PASSED: All tests Yaesu FT-1802M CopyAll PASSED: All tests Yaesu FT-1802M Clone PASSED: All tests Yaesu FT-1802M BruteForce PASSED: All tests Yaesu FT-1802M Edges PASSED: All tests Yaesu FT-1802M Banks SKIPPED: Banks not supported Yaesu FT-2800M Detect PASSED: All tests Yaesu FT-2800M CopyAll PASSED: All tests Yaesu FT-2800M Clone PASSED: All tests Yaesu FT-2800M BruteForce PASSED: All tests Yaesu FT-2800M Edges PASSED: All tests Yaesu FT-2800M Banks SKIPPED: Banks not supported Yaesu FT-60 Detect PASSED: All tests Yaesu FT-60 CopyAll PASSED: All tests Yaesu FT-60 Clone PASSED: All tests Yaesu FT-60 BruteForce PASSED: All tests Yaesu FT-60 Edges PASSED: All tests Yaesu FT-60 Banks SKIPPED: Banks not supported Yaesu FT-7800 Detect PASSED: All tests Yaesu FT-7800 CopyAll PASSED: All tests Yaesu FT-7800 Clone PASSED: All tests Yaesu FT-7800 BruteForce PASSED: All tests Yaesu FT-7800 Edges PASSED: All tests Yaesu FT-7800 Banks PASSED: All tests Yaesu FT-817 Detect PASSED: All tests Yaesu FT-817 CopyAll PASSED: All tests Yaesu FT-817 Clone PASSED: All tests Yaesu FT-817 BruteForce PASSED: All tests Yaesu FT-817 Edges PASSED: All tests Yaesu FT-817 Banks SKIPPED: Banks not supported Yaesu FT-817ND Detect PASSED: All tests Yaesu FT-817ND CopyAll PASSED: All tests Yaesu FT-817ND Clone PASSED: All tests Yaesu FT-817ND BruteForce PASSED: All tests Yaesu FT-817ND Edges PASSED: All tests Yaesu FT-817ND Banks SKIPPED: Banks not supported Yaesu FT-817ND (US) Detect PASSED: All tests Yaesu FT-817ND (US) CopyAll PASSED: All tests Yaesu FT-817ND (US) Clone PASSED: All tests Yaesu FT-817ND (US) BruteForce PASSED: All tests Yaesu FT-817ND (US) Edges PASSED: All tests Yaesu FT-817ND (US) Banks SKIPPED: Banks not supported Yaesu FT-857/897 Detect PASSED: All tests Yaesu FT-857/897 CopyAll PASSED: All tests Yaesu FT-857/897 Clone PASSED: All tests Yaesu FT-857/897 BruteForce PASSED: All tests Yaesu FT-857/897 Edges PASSED: All tests Yaesu FT-857/897 Banks SKIPPED: Banks not supported Yaesu FT-857/897 (U Detect PASSED: All tests Yaesu FT-857/897 (U CopyAll PASSED: All tests Yaesu FT-857/897 (U Clone PASSED: All tests Yaesu FT-857/897 (U BruteForce PASSED: All tests Yaesu FT-857/897 (U Edges PASSED: All tests Yaesu FT-857/897 (U Banks SKIPPED: Banks not supported Yaesu FT-8800 Left Detect PASSED: All tests Yaesu FT-8800 Left CopyAll PASSED: All tests Yaesu FT-8800 Left Clone PASSED: All tests Yaesu FT-8800 Left BruteForce PASSED: All tests Yaesu FT-8800 Left Edges PASSED: All tests Yaesu FT-8800 Left Banks PASSED: All tests Yaesu FT-8800 Right Detect PASSED: All tests Yaesu FT-8800 Right CopyAll PASSED: All tests Yaesu FT-8800 Right Clone PASSED: All tests Yaesu FT-8800 Right BruteForce PASSED: All tests Yaesu FT-8800 Right Edges PASSED: All tests Yaesu FT-8800 Right Banks PASSED: All tests Yaesu FT-8900 Detect PASSED: All tests Yaesu FT-8900 CopyAll PASSED: All tests Yaesu FT-8900 Clone PASSED: All tests Yaesu FT-8900 BruteForce PASSED: All tests Yaesu FT-8900 Edges PASSED: All tests Yaesu FT-8900 Banks SKIPPED: Banks not supported Yaesu FTM-350 Left Detect PASSED: All tests Yaesu FTM-350 Left CopyAll PASSED: All tests Yaesu FTM-350 Left Clone PASSED: All tests Yaesu FTM-350 Left BruteForce PASSED: All tests Yaesu FTM-350 Left Edges PASSED: All tests Yaesu FTM-350 Left Banks SKIPPED: Banks not supported Yaesu FTM-350 Right Detect PASSED: All tests Yaesu FTM-350 Right CopyAll PASSED: All tests Yaesu FTM-350 Right Clone PASSED: All tests Yaesu FTM-350 Right BruteForce PASSED: All tests Yaesu FTM-350 Right Edges PASSED: All tests Yaesu FTM-350 Right Banks SKIPPED: Banks not supported Yaesu VX-2 Detect PASSED: All tests Yaesu VX-2 CopyAll PASSED: All tests Yaesu VX-2 Clone PASSED: All tests Yaesu VX-2 BruteForce PASSED: All tests Yaesu VX-2 Edges PASSED: All tests Yaesu VX-2 Banks PASSED: All tests Yaesu VX-3 Detect PASSED: All tests Yaesu VX-3 CopyAll PASSED: All tests Yaesu VX-3 Clone PASSED: All tests Yaesu VX-3 BruteForce PASSED: All tests Yaesu VX-3 Edges PASSED: All tests Yaesu VX-3 Banks PASSED: All tests Yaesu VX-5 Detect PASSED: All tests Yaesu VX-5 CopyAll PASSED: All tests Yaesu VX-5 Clone PASSED: All tests Yaesu VX-5 BruteForce PASSED: All tests Yaesu VX-5 Edges PASSED: All tests Yaesu VX-5 Banks PASSED: All tests Yaesu VX-6 Detect PASSED: All tests Yaesu VX-6 CopyAll PASSED: All tests Yaesu VX-6 Clone PASSED: All tests Yaesu VX-6 BruteForce PASSED: All tests Yaesu VX-6 Edges PASSED: All tests Yaesu VX-6 Banks PASSED: All tests Yaesu VX-7 Detect PASSED: All tests Yaesu VX-7 CopyAll PASSED: All tests Yaesu VX-7 Clone PASSED: All tests Yaesu VX-7 BruteForce PASSED: All tests Yaesu VX-7 Edges PASSED: All tests Yaesu VX-7 Banks PASSED: All tests Yaesu VX-8 R Detect PASSED: All tests Yaesu VX-8 R CopyAll PASSED: All tests Yaesu VX-8 R Clone PASSED: All tests Yaesu VX-8 R BruteForce PASSED: All tests Yaesu VX-8 R Edges PASSED: All tests Yaesu VX-8 R Banks PASSED: All tests ---------------------------------------------------------------------- Results: TOTAL : 336 FAILED : 0 SKIPPED: 37 PASSED : 299 CRASHED: 0 Patch 'tip' is OK ================================================ Tests OK Email was triggered for: Success Sending email for trigger: Success

1 0

[chirp_devel] [PATCH] [UV-B5] Display of STEP Setting Issue
by Jim Unroe 08 Dec '13

08 Dec '13

# HG changeset patch # User Jim Unroe <rock.unroe(a)gmail.com> # Date 1386511833 18000 # Node ID 41950a14c1c9103caa4561531dffe38b71e11e39 # Parent 720f9773857660de70f767262f1c729d99c316d1 [UV-B5] Display of STEP Setting Issue This patch forces a valid STEP value and restores CHIRP's ability to program frequencies with a resolution of 2.5 KHz related to #1179 diff -r 720f97738576 -r 41950a14c1c9 chirp/uvb5.py --- a/chirp/uvb5.py Tue Dec 03 11:13:12 2013 -0800 +++ b/chirp/uvb5.py Sun Dec 08 09:10:33 2013 -0500 @@ -284,8 +284,7 @@ rf.valid_power_levels = POWER_LEVELS rf.has_ctone = True rf.has_bank = False - rf.has_tuning_step = True - rf.valid_tuning_steps = UVB5_STEPS + rf.has_tuning_step = False rf.memory_bounds = (1, 99) return rf @@ -371,11 +370,8 @@ self._decode_tone(_mem.txtone, _mem.txpol), self._decode_tone(_mem.rxtone, _mem.rxpol)) - if _mem.step < 0x06: - mem.tuning_step = UVB5_STEPS[_mem.step] - else: + if _mem.step > 0x05: _mem.step = 0x00 - mem.tuning_step = UVB5_STEPS[0] mem.duplex = DUPLEX[_mem.duplex] mem.mode = _mem.isnarrow and "NFM" or "FM" mem.skip = "" if _mem.scanadd else "S" @@ -442,7 +438,6 @@ self._encode_tone(_mem, 'tx', *tx) self._encode_tone(_mem, 'rx', *rx) - _mem.step = UVB5_STEPS.index(mem.tuning_step) _mem.isnarrow = mem.mode == "NFM" _mem.scanadd = mem.skip == "" _mem.highpower = mem.power == POWER_LEVELS[1]

1 0

[chirp_devel] [PATCH] [KG-UV3]Add FM Presets
by Jim Unroe 07 Dec '13

07 Dec '13

# HG changeset patch # User Jim Unroe <rock.unroe(a)gmail.com> # Date 1386445464 18000 # Node ID eee14df4c4e590bf653da9a507a009be070e06e3 # Parent a7632ab56621a4843eb0f6cd2e917196510b615e [KG-UV3]Add FM Presets for Wouxun KG-UVD1P, KG-UV2 and KG-UV3 expose fm preset settings fields in memmap add FM Presets tab add FM Preset settings and other associated support related to #1167 diff -r a7632ab56621 -r eee14df4c4e5 chirp/wouxun.py --- a/chirp/wouxun.py Fri Dec 06 14:57:28 2013 -0500 +++ b/chirp/wouxun.py Sat Dec 07 14:44:24 2013 -0500 @@ -85,6 +85,12 @@ u8 unknown[2]; } memory[199]; + #seekto 0x0842; + u16 fm_presets_0[9]; + + #seekto 0x0882; + u16 fm_presets_1[9]; + #seekto 0x0970; struct { u16 vhf_rx_start; @@ -324,7 +330,8 @@ def get_settings(self): freqranges = RadioSettingGroup("freqranges", "Freq ranges") - top = RadioSettingGroup("top", "All Settings", freqranges) + fm_preset = RadioSettingGroup("fm_preset", "FM Presets") + top = RadioSettingGroup("top", "All Settings", freqranges, fm_preset) rs = RadioSetting("menu_available", "Menu Available", RadioSettingValueBoolean( @@ -570,6 +577,29 @@ rs.set_apply_callback(apply_ani_id, self._memobj.settings) top.append(rs) + for i in range(0, 9): + if self._memobj.fm_presets_0[i] != 0xFFFF: + used = True + preset = self._memobj.fm_presets_0[i]/10.0+76 + else: + used = False + preset = 76 + rs = RadioSetting("fm_presets_0_%1i" % i, "Team 1 Location %i" % (i+1), + RadioSettingValueBoolean(used), + RadioSettingValueFloat(76, 108, preset, 0.1, 1)) + fm_preset.append(rs) + for i in range(0, 9): + if self._memobj.fm_presets_1[i] != 0xFFFF: + used = True + preset = self._memobj.fm_presets_1[i]/10.0+76 + else: + used = False + preset = 76 + rs = RadioSetting("fm_presets_1_%1i" % i, "Team 2 Location %i" % (i+1), + RadioSettingValueBoolean(used), + RadioSettingValueFloat(76, 108, preset, 0.1, 1)) + fm_preset.append(rs) + return top def set_settings(self, settings): @@ -577,6 +607,8 @@ if not isinstance(element, RadioSetting): if element.get_name() == "freqranges" : self._set_freq_settings(element) + elif element.get_name() == "fm_preset" : + self._set_fm_preset(element) else: self.set_settings(element) continue @@ -602,6 +634,26 @@ print element.get_name() raise + def _set_fm_preset(self, settings): + obj = self._memobj + for element in settings: + try: + (bank, index) = (int(a) for a in element.get_name().split("_")[-2:]) + val = element.value + if val[0].get_value(): + value = int(val[1].get_value()*10-760) + else: + value = 0xffff + print "Setting fm_presets_%1i[%1i] = %s" % (bank, index, value) + if bank == 0: + setting = self._memobj.fm_presets_0 + else: + setting = self._memobj.fm_presets_1 + setting[index] = value + except Exception, e: + print element.get_name() + raise + def _set_freq_settings(self, settings): for element in settings: try:

1 0

[chirp_devel] [PATCH] [KG-UV3]Add Basic Settings
by Jim Unroe 06 Dec '13

06 Dec '13

# HG changeset patch # User Jim Unroe <rock.unroe(a)gmail.com> # Date 1386359848 18000 # Node ID a7632ab56621a4843eb0f6cd2e917196510b615e # Parent 720f9773857660de70f767262f1c729d99c316d1 [KG-UV3]Add Basic Settings for Wouxun KG-UVD1P, KG-UV2 and KG-UV3 expose basic settings fields in memmap add Basic Settings tab add Basic Settings and other associated support related to #1167 diff -r 720f97738576 -r a7632ab56621 chirp/wouxun.py --- a/chirp/wouxun.py Tue Dec 03 11:13:12 2013 -0800 +++ b/chirp/wouxun.py Fri Dec 06 14:57:28 2013 -0500 @@ -97,10 +97,86 @@ u16 uhf_tx_stop; } freq_ranges; - #seekto 0x0E5C; + #seekto 0x0E00; struct { - u8 unknown_flag1:7, + char welcome1[6]; + char welcome2[6]; + char single_band[6]; + } strings; + + #seekto 0x0E20; + struct { + u8 unknown_flag_01:6, + vfo_b_ch_disp:2; + u8 unknown_flag_02:5, + vfo_a_fr_step:3; + u8 unknown_flag_03:4, + vfo_a_squelch:4; + u8 unknown_flag_04:7, + power_save:1; + u8 unknown_flag_05:8; + u8 unknown_flag_06:6, + roger_beep:2; + u8 unknown_flag_07:2, + transmit_time_out:6; + u8 unknown_flag_08:4, + vox:4; + u8 unknown_1[4]; + u8 unknown_flag_09:6, + voice:2; + u8 unknown_flag_10:7, + beep:1; + u8 unknown_flag_11:7, + ani_id_enable:1; + u8 unknown_2[2]; + u8 unknown_flag_12:5, + vfo_b_fr_step:3; + u8 unknown_3[1]; + u8 unknown_flag_13:3, + ani_id_tx_delay:5; + u8 unknown_4[1]; + u8 unknown_flag_14:6, + ani_id_sidetone:2; + u8 unknown_flag_15:4, + tx_time_out_alert:4; + u8 unknown_flag_16:6, + vfo_a_ch_disp:2; + u8 unknown_flag_15:6, + scan_mode:2; + u8 unknown_flag_16:7, + kbd_lock:1; + u8 unknown_flag_17:6, + ponmsg:2; + u8 unknown_flag_18:5, + pf1_function:3; + u8 unknown_5[1]; + u8 unknown_flag_19:7, + auto_backlight:1; + u8 unknown_flag_20:7, + sos_ch:1; + u8 unknown_6; + u8 sd_available; + u8 unknown_flag_21:7, + auto_lock_kbd:1; + u8 unknown_flag_22:4, + vfo_b_squelch:4; + u8 unknown_7[1]; + u8 unknown_flag_23:7, + stopwatch:1; + u8 vfo_a_cur_chan; + u8 unknown_flag_24:7, + dual_band_receive:1; + u8 current_vfo:1, + unknown_flag_24:7; + u8 unknown_8[2]; + u8 mode_password[6]; + u8 reset_password[6]; + u8 ani_id_content[6]; + u8 unknown_flag_25:7, menu_available:1; + u8 unknown_9[1]; + u8 priority_chan; + u8 vfo_b_cur_chan; } settings; #seekto 0x1008; @@ -299,19 +375,211 @@ # tell the decoded ranges to UI self.valid_freq = [ ( decode_freq(self._memobj.freq_ranges.vhf_rx_start) * 1000000, - (decode_freq(self._memobj.freq_ranges.vhf_rx_stop)+1) * 1000000), + (decode_freq(self._memobj.freq_ranges.vhf_rx_stop)+1) * 1000000), ( decode_freq(self._memobj.freq_ranges.uhf_rx_start) * 1000000, (decode_freq(self._memobj.freq_ranges.uhf_rx_stop)+1) * 1000000)] + def _filter(name): + filtered = "" + for char in str(name): + if char in chirp_common.CHARSET_ASCII: + filtered += char + else: + filtered += " " + return filtered + + # add some radio specific settings + options = ["Off", "Welcome", "V bat"] + rs = RadioSetting("ponmsg", "Poweron message", + RadioSettingValueList(options, + options[self._memobj.settings.ponmsg])) + top.append(rs) + rs = RadioSetting("strings.welcome1", "Power-On Message 1", + RadioSettingValueString(0, 6, + _filter(self._memobj.strings.welcome1))) + top.append(rs) + rs = RadioSetting("strings.welcome2", "Power-On Message 2", + RadioSettingValueString(0, 6, + _filter(self._memobj.strings.welcome2))) + top.append(rs) + rs = RadioSetting("strings.single_band", "Single Band Message", + RadioSettingValueString(0, 6, + _filter(self._memobj.strings.single_band))) + top.append(rs) + options = ["Channel", "ch/freq","Name", "VFO"] + rs = RadioSetting("vfo_a_ch_disp", "VFO A Channel disp mode", + RadioSettingValueList(options, + options[self._memobj.settings.vfo_a_ch_disp])) + top.append(rs) + rs = RadioSetting("vfo_b_ch_disp", "VFO B Channel disp mode", + RadioSettingValueList(options, + options[self._memobj.settings.vfo_b_ch_disp])) + top.append(rs) + options = ["5.0", "6.25", "10.0", "12.5", "25.0", "50.0", "100.0"] + rs = RadioSetting("vfo_a_fr_step", "VFO A Frequency Step", + RadioSettingValueList(options, + options[self._memobj.settings.vfo_a_fr_step])) + top.append(rs) + rs = RadioSetting("vfo_b_fr_step", "VFO B Frequency Step", + RadioSettingValueList(options, + options[self._memobj.settings.vfo_b_fr_step])) + top.append(rs) + rs = RadioSetting("vfo_a_squelch", "VFO A Squelch", + RadioSettingValueInteger(0, 9, + self._memobj.settings.vfo_a_squelch)) + top.append(rs) + rs = RadioSetting("vfo_b_squelch", "VFO B Squelch", + RadioSettingValueInteger(0, 9, + self._memobj.settings.vfo_b_squelch)) + top.append(rs) + rs = RadioSetting("vfo_a_cur_chan", "VFO A current channel", + RadioSettingValueInteger(1, 128, + self._memobj.settings.vfo_a_cur_chan)) + top.append(rs) + rs = RadioSetting("vfo_b_cur_chan", "VFO B current channel", + RadioSettingValueInteger(1, 128, + self._memobj.settings.vfo_b_cur_chan)) + top.append(rs) + rs = RadioSetting("priority_chan", "Priority channel", + RadioSettingValueInteger(0, 199, + self._memobj.settings.priority_chan)) + top.append(rs) + rs = RadioSetting("power_save", "Power save", + RadioSettingValueBoolean( + self._memobj.settings.power_save)) + top.append(rs) + options = ["Off", "Scan", "Lamp", "SOS", "Radio"] + rs = RadioSetting("pf1_function", "PF1 Function select", + RadioSettingValueList(options, + options[self._memobj.settings.pf1_function])) + top.append(rs) + options = ["Off", "Begin", "End", "Both"] + rs = RadioSetting("roger_beep", "Roger beep select", + RadioSettingValueList(options, + options[self._memobj.settings.roger_beep])) + top.append(rs) + options = ["%s" % x for x in range(15, 615, 15)] + rs = RadioSetting("transmit_time_out", "TX Time-out Timer", + RadioSettingValueList(options, + options[self._memobj.settings.transmit_time_out])) + top.append(rs) + rs = RadioSetting("tx_time_out_alert", "TX Time-out Alert", + RadioSettingValueInteger(0, 10, + self._memobj.settings.tx_time_out_alert)) + top.append(rs) + rs = RadioSetting("vox", "Vox", + RadioSettingValueInteger(0, 10, + self._memobj.settings.vox)) + top.append(rs) + options = ["Off", "Chinese", "English"] + rs = RadioSetting("voice", "Voice", + RadioSettingValueList(options, + options[self._memobj.settings.voice])) + top.append(rs) + rs = RadioSetting("beep", "Beep", + RadioSettingValueBoolean(self._memobj.settings.beep)) + top.append(rs) + rs = RadioSetting("ani_id_enable", "ANI id enable", + RadioSettingValueBoolean( + self._memobj.settings.ani_id_enable)) + top.append(rs) + rs = RadioSetting("ani_id_tx_delay", "ANI id tx delay", + RadioSettingValueInteger(0, 30, + self._memobj.settings.ani_id_tx_delay)) + top.append(rs) + options = ["Off", "Key", "ANI", "Key+ANI"] + rs = RadioSetting("ani_id_sidetone", "ANI id sidetone", + RadioSettingValueList(options, + options[self._memobj.settings.ani_id_sidetone])) + top.append(rs) + options = ["Time", "Carrier", "Search"] + rs = RadioSetting("scan_mode", "Scan mode", + RadioSettingValueList(options, + options[self._memobj.settings.scan_mode])) + top.append(rs) + rs = RadioSetting("kbd_lock", "Keyboard lock", + RadioSettingValueBoolean( + self._memobj.settings.kbd_lock)) + top.append(rs) + rs = RadioSetting("auto_lock_kbd", "Auto lock keyboard", + RadioSettingValueBoolean( + self._memobj.settings.auto_lock_kbd)) + top.append(rs) + rs = RadioSetting("auto_backlight", "Auto backlight", + RadioSettingValueBoolean( + self._memobj.settings.auto_backlight)) + top.append(rs) + options = ["CH A", "CH B"] + rs = RadioSetting("sos_ch", "SOS CH", + RadioSettingValueList(options, + options[self._memobj.settings.sos_ch])) + top.append(rs) + rs = RadioSetting("stopwatch", "Stopwatch", + RadioSettingValueBoolean( + self._memobj.settings.stopwatch)) + top.append(rs) + rs = RadioSetting("dual_band_receive", "Dual band receive", + RadioSettingValueBoolean( + self._memobj.settings.dual_band_receive)) + top.append(rs) + options = ["VFO A", "VFO B"] + rs = RadioSetting("current_vfo", "Current VFO", + RadioSettingValueList(options, + options[self._memobj.settings.current_vfo])) + top.append(rs) + + options = ["Dual", "Single"] + rs = RadioSetting("sd_available", "Single/Dual Band", + RadioSettingValueList(options, + options[self._memobj.settings.sd_available])) + top.append(rs) + + _pwd = self._memobj.settings.mode_password + rs = RadioSetting("mode_password", "Mode password (000000 disabled)", + RadioSettingValueInteger(0, 9, _pwd[0]), + RadioSettingValueInteger(0, 9, _pwd[1]), + RadioSettingValueInteger(0, 9, _pwd[2]), + RadioSettingValueInteger(0, 9, _pwd[3]), + RadioSettingValueInteger(0, 9, _pwd[4]), + RadioSettingValueInteger(0, 9, _pwd[5])) + top.append(rs) + _pwd = self._memobj.settings.reset_password + rs = RadioSetting("reset_password", "Reset password (000000 disabled)", + RadioSettingValueInteger(0, 9, _pwd[0]), + RadioSettingValueInteger(0, 9, _pwd[1]), + RadioSettingValueInteger(0, 9, _pwd[2]), + RadioSettingValueInteger(0, 9, _pwd[3]), + RadioSettingValueInteger(0, 9, _pwd[4]), + RadioSettingValueInteger(0, 9, _pwd[5])) + top.append(rs) + + dtmfchars = "0123456789 *#ABCD" + _codeobj = self._memobj.settings.ani_id_content + _code = "".join([dtmfchars[x] for x in _codeobj if int(x) < 0x1F]) + val = RadioSettingValueString(0, 6, _code, False) + val.set_charset(dtmfchars) + rs = RadioSetting("settings.ani_id_content", "PTT-ID Code", val) + def apply_ani_id(setting, obj): + value = [] + for j in range(0, 6): + try: + value.append(dtmfchars.index(str(setting.value)[j])) + except IndexError: + value.append(0xFF) + obj.ani_id_content = value + rs.set_apply_callback(apply_ani_id, self._memobj.settings) + top.append(rs) + return top def set_settings(self, settings): for element in settings: if not isinstance(element, RadioSetting): - if element.get_name() != "freqranges" : + if element.get_name() == "freqranges" : + self._set_freq_settings(element) + else: self.set_settings(element) - else: - self._set_freq_settings(element) + continue else: try: if "." in element.get_name(): @@ -323,8 +591,13 @@ else: obj = self._memobj.settings setting = element.get_name() - print "Setting %s = %s" % (setting, element.value) - setattr(obj, setting, element.value) + + if element.has_apply_callback(): + print "Using apply callback" + element.run_apply_callback() + else: + print "Setting %s = %s" % (setting, element.value) + setattr(obj, setting, element.value) except Exception, e: print element.get_name() raise @@ -347,7 +620,7 @@ code = int("%03o" % (val & 0x07FF)) pol = (val & 0x8000) and "R" or "N" return code, pol - + if _mem.tx_tone != 0xFFFF and _mem.tx_tone > 0x2800: tcode, tpol = _get_dcs(_mem.tx_tone) mem.dtcs = tcode

1 0