- Developers - lists.chirpmyradio.com

[chirp_devel] Development environments
by Clark Sann 12 Feb '14

12 Feb '14

Do any of you use IDEs to develop chirp? I've been using PyCharm and I like it pretty well.

2 2

Re: [chirp_devel] General inquiry on adding "settings"
by chirp.cordless＠xoxy.net 06 Feb '14

06 Feb '14

I found that if I use Developer Tools -> Diff Tabs and set both memory numbers to -1, I get a very useful dump, with highlighted diffs, of the entire image. I can do it within chirp after the radio download, although I do usually save an image of the dump for further use. I did hack my local copy of common.py to use a 13 point font instead of 11, a little easier for my old eyes to catch the differences, but other than that, it's a pretty nice tool for this task. I haven't yet looked at your bitdiff.py; what would be its advantages over what's built into chirp? Thanks and regards, -dan > Date: Wed, 5 Feb 2014 19:50:33 -0800 (PST) > From: "Jens J." <kd4tjx(a)yahoo.com> > > what I'm referring to is a command-line utility in the tools folder for diffing two radio images > I think it's in the daily source tarballs - for sure it's in the chirp.hg mercurial repo that you'll have when developing ;) > > Feel free to improve/extend as you see fit. > One thing I was thinking of doing is to revamp it as a full-on class module so the diffing/conversion functionality can reused/extended/etc, into other progs.... > > From: "chirp.cordless(a)xoxy.net" <chirp.cordless(a)xoxy.net> > Sent: Wednesday, February 5, 2014 9:24 PM > > Thanks, I've been using it, if we're talking Developer Tools -> Diff Tabs. > I wouldn't attempt this task without something like it, > and if it didn't exist, I'd start by building it, even if was just > diffing the .img files. > > -dan > >> Date: Tue, 4 Feb 2014 13:09:33 -0800 (PST) >> From: "Jens J." <kd4tjx(a)yahoo.com> >> >> You may also want to take a look at tools/bitdiff.py which i created to help you "diff" two radio images, to attempt to make the process of >> 1. download an image >> 2. change one setting >> 3. redownload image >> 4. compare images for what changed >> >> a tad bit easier (hopefully)... >> >> -Jens

1 0

Re: [chirp_devel] General inquiry on adding "settings"
by chirp.cordless＠xoxy.net 06 Feb '14

06 Feb '14

Thanks, I've been using it, if we're talking Developer Tools -> Diff Tabs. I wouldn't attempt this task without something like it, and if it didn't exist, I'd start by building it, even if was just diffing the .img files. -dan > Date: Tue, 4 Feb 2014 13:09:33 -0800 (PST) > From: "Jens J." <kd4tjx(a)yahoo.com> > Subject: Re: [chirp_devel] General inquiry on adding "settings" > > You may also want to take a look at tools/bitdiff.py which i created to help you "diff" two radio images, to attempt to make the process of > 1. download an image > 2. change one setting > 3. redownload image > 4. compare images for what changed > > a tad bit easier (hopefully)... > > -Jens

2 1

[chirp_devel] [PATCH] fix bad cable errors for some users on upload #1397
by Jens Jensen 06 Feb '14

06 Feb '14

# HG changeset patch # User Jens Jensen <kd4tjx(a)yahoo.com> # Date 1391656313 21600 # Node ID 2cc760f7d07ff55b69082644f5b2545b51729571 # Parent db80e2e04c0e628bcd66f75d01f2a07a56ac16fc fix bad cable errors for some users on upload #1397 some users are seeing bad cable errors on upload, which may be related to changes made in #1187 for ft-90 to open port before pre_upload prompt. now making this an optional behavior (defaults to showing prompt first) ft-90 will use this optional behavior to open the port before showing prompt. (revamp of original patch attempt) diff -r db80e2e04c0e -r 2cc760f7d07f chirp/chirp_common.py --- a/chirp/chirp_common.py Sun Jan 26 16:16:02 2014 -0500 +++ b/chirp/chirp_common.py Wed Feb 05 21:11:53 2014 -0600 @@ -650,6 +650,7 @@ experimental = None pre_download = None pre_upload = None + display_pre_upload_prompt_before_opening_port = True BOOLEAN = [True, False] diff -r db80e2e04c0e -r 2cc760f7d07f chirp/ft90.py --- a/chirp/ft90.py Sun Jan 26 16:16:02 2014 -0500 +++ b/chirp/ft90.py Wed Feb 05 21:11:53 2014 -0600 @@ -199,6 +199,7 @@ 3. Replace mic with PC programming cable. 4. Press the [DISP/SS] key ("R" will appear on the lower left of LCD).""")) + rp.display_pre_upload_prompt_before_opening_port = False return rp @classmethod diff -r db80e2e04c0e -r 2cc760f7d07f chirpui/mainapp.py --- a/chirpui/mainapp.py Sun Jan 26 16:16:02 2014 -0500 +++ b/chirpui/mainapp.py Wed Feb 05 21:11:53 2014 -0600 @@ -655,6 +655,11 @@ d.destroy() if not settings: return + prompts = radio.get_prompts() + + if prompts.display_pre_upload_prompt_before_opening_port == True: + print "Opening port after pre_upload prompt." + self._show_instructions(radio, prompts.pre_upload) if isinstance(radio, chirp_common.ExperimentalRadio) and \ not self._confirm_experimental(radio.__class__): @@ -673,7 +678,9 @@ d.destroy() return - self._show_instructions(radio, radio.get_prompts().pre_upload) + if prompts.display_pre_upload_prompt_before_opening_port == False: + print "Opening port before pre_upload prompt." + self._show_instructions(radio, prompts.pre_upload) radio.set_pipe(ser)

1 0

[chirp_devel] Build test results: Successful
by Build System 06 Feb '14

06 Feb '14

Tested changes: [Jens Jensen <kd4tjx(a)yahoo.com>] [ic-2820] fix unsupported chars in channel name #1425 updating supported charset from alphanumeric to ascii. Full log: [...truncated 21 lines...] test_bbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_lbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_lbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_int_array (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u8 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_char (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string_invalid_chars (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string_wrong_length (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_comment_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok test_comment_inline_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok test_missing_semicolon (tests.unit.test_bitwise.TestBitwiseErrors) ... ok test_seek (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_seekto (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_struct_one_element (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_two_elements (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_writes (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok split_tone_encode_test_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_none (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_none (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_fix_rounded_step_250 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_500 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_750 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_12_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_2_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_5_0 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_6_25 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_fractional_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step_fail (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_format_freq (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_bad (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_decimal (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whitespace (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whole (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_ensure_has_calls_almost_full (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_empty (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_partial (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full1 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full2 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_urcall_full (tests.unit.test_import_logic.DstarTests) ... ok test_import_bank (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffA_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffB_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_negative (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_too_big_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_uhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_errors (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_warnings (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_invalid (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_am (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_fm (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_name (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_closest (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_dst (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_src (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_same (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffA_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffB_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModelIndexInterface) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_icom_bank (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_index_bounds (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_next_mapping_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_auto_tone_mode_cross (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_pol (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_rx (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tone (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tsql (tests.unit.test_memedit_edits.TestEdits) ... ok test_init (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_bad_portnames (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_sorted (tests.unit.test_platform.Win32PlatformTest) ... ok test_apply_callback (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_group (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_multi (tests.unit.test_settings.TestSettingContainers) ... ok test_changed (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_boolean (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_float (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_integer (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_list (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_string (tests.unit.test_settings.TestSettingValues) ... ok test_validate_callback (tests.unit.test_settings.TestSettingValues) ... ok test_delete_hole_with_all (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_all_full (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_without_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_with_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_without_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok ---------------------------------------------------------------------- Ran 151 tests in 0.150s OK Registered Icom_IC-2820H = IC2820Radio Registered TYT_TH-UVF8D = TYTUVF8DRadio Registered AnyTone_5888UV = AnyTone5888UVRadio Registered Intek_HR-2040 = IntekHR2040Radio Registered Polmar_DB-50M = PolmarDB50MRadio Registered Powerwerx_DB-750X = PowerwerxDB750XRadio Registered Icom_IC-2200H = IC2200Radio Registered Yaesu_FT-2800M = FT2800Radio Registered Yaesu_VX-3 = VX3Radio Registered Icom_IC-2100H = IC2100Radio Registered Yaesu_FTM-350 = FTM350Radio Registered Icom_IC-91_92AD_ICF_File = IC9xICFRadio Registered Icom_IC-V82_U82 = ICx8xRadio Registered Yaesu_VX-6 = VX6Radio Registered Yaesu_VX-5 = VX5Radio Registered Yaesu_FT-60 = FT60Radio Registered Yaesu_VX-7 = VX7Radio Registered Baofeng_UV-5R = BaofengUV5R Registered Baofeng_F-11 = BaofengF11Radio Registered Baofeng_UV-82 = BaofengUV82Radio Registered Yaesu_FT-1802M = FT1802Radio Registered Kenwood_TK-7102 = KenwoodTK7102Radio Registered Kenwood_TK-8102 = KenwoodTK8102Radio Registered Kenwood_TK-7108 = KenwoodTK7108Radio Registered Kenwood_TK-8108 = KenwoodTK8108Radio Registered Icom_ID-31A = ID31Radio Registered Icom_ID-51A = ID51Radio Registered Icom_IC-2720H = IC2720Radio Registered Icom_IC-T8A = ICT8ARadio Registered Wouxun_KG-UVD1P = KGUVD1PRadio Registered Wouxun_KG-UV6 = KGUV6DRadio Registered Wouxun_KG-816 = KG816Radio Registered Wouxun_KG-818 = KG818Radio Registered TYT_TH-UVF1 = TYTTHUVF1Radio Registered Yaesu_FT-90 = FT90Radio Registered Generic_CSV = CSVRadio Registered Commander_KG-UV = CommanderCSVRadio Registered RT_Systems_CSV = RTCSVRadio Registered Kenwood_ITM = ITMRadio Registered Alinco_DR03T = DR03Radio Registered Alinco_DR06T = DR06Radio Registered Alinco_DR135T = DR135Radio Registered Alinco_DR235T = DR235Radio Registered Alinco_DR435T = DR435Radio Registered Alinco_DJ596 = DJ596Radio Registered Jetstream_JT220M = JT220MRadio Registered Alinco_DJ175 = DJ175Radio Registered Kenwood_TH-D7 = THD7Radio Registered Kenwood_TH-D7G = THD7GRadio Registered Kenwood_TM-D700 = TMD700Radio Registered Kenwood_TM-V7 = TMV7Radio Registered Kenwood_TM-G707 = TMG707Radio Registered Kenwood_TH-G71 = THG71Radio Registered Kenwood_TH-F6 = THF6ARadio Registered Kenwood_TH-F7 = THF7ERadio Registered Kenwood_TM-D710 = TMD710Radio Registered Kenwood_TH-D72_live_mode = THD72Radio Registered Kenwood_TM-V71 = TMV71Radio Registered Kenwood_TH-K2 = THK2Radio Registered Kenwood_TM-271 = TM271Radio Registered Kenwood_TM-471 = TM471Radio Registered Yaesu_VX-8_R = VX8Radio Registered Yaesu_VX-8_DR = VX8DRadio Registered Yaesu_VX-8_GE = VX8GERadio Registered Icom_IC-T7H = ICT7HRadio Registered Icom_IC-Q7A = ICQ7Radio Registered Baofeng_UV-B5 = BaofengUVB5 Registered Generic_XML = XMLRadio Registered Kenwood_HMK = HMKRadio Registered Kenwood_TH-D72_clone_mode = THD72Radio Registered Icom_IC-91_92AD = IC9xRadio Registered Icom_IC-T70 = ICT70Radio Registered Icom_IC-208H = IC208Radio Registered Icom_ID-800H_v2 = ID800v2Radio Registered Icom_7200 = Icom7200Radio Registered Icom_7000 = Icom7000Radio Registered Icom_746 = Icom746Radio Registered ARRL_Travel_Plus = TpeRadio Registered Vertex_Standard_VXA-700 = VXA700Radio Registered Icom_IC-W32A = ICW32ARadio Registered Baofeng_UV-3R = UV3RRadio Registered Yaesu_VX-2 = VX2Radio Registered Puxing_PX-777 = Puxing777Radio Registered Puxing_PX-2R = Puxing2RRadio Registered Baojie_BJ-UV55 = BaojieBJUV55Radio Registered Baofeng_BF-888 = H777Radio Registered Yaesu_FT-7800_7900 = FT7800Radio Registered Yaesu_FT-8800 = FT8800Radio Registered Yaesu_FT-8900 = FT8900Radio Registered Yaesu_FT-817 = FT817Radio Registered Yaesu_FT-817ND = FT817NDRadio Registered Yaesu_FT-817ND_US = FT817NDUSRadio Registered Yaesu_FT-857_897 = FT857Radio Registered Yaesu_FT-857_897_US = FT857USRadio Registered Icom_ID-880H = ID880Radio Registered Icom_ID-80H = ID80Radio Registered TYT_TH-UV3R = TYTUV3RRadio Alinco DJ175 Detect PASSED: All tests Alinco DJ175 CopyAll PASSED: All tests Alinco DJ175 Clone PASSED: All tests Alinco DJ175 BruteForce PASSED: All tests Alinco DJ175 Edges PASSED: All tests Alinco DJ175 Banks SKIPPED: Banks not supported Alinco DJ596 Detect PASSED: All tests Alinco DJ596 CopyAll PASSED: All tests Alinco DJ596 Clone PASSED: All tests Alinco DJ596 BruteForce PASSED: All tests Alinco DJ596 Edges PASSED: All tests Alinco DJ596 Banks SKIPPED: Banks not supported Alinco DR235T Detect PASSED: All tests Alinco DR235T CopyAll PASSED: All tests Alinco DR235T Clone PASSED: All tests Alinco DR235T BruteForce PASSED: All tests Alinco DR235T Edges PASSED: All tests Alinco DR235T Banks SKIPPED: Banks not supported Baofeng BF-888 Detect PASSED: All tests Baofeng BF-888 CopyAll PASSED: All tests Baofeng BF-888 Clone PASSED: All tests Baofeng BF-888 BruteForce PASSED: All tests Baofeng BF-888 Edges PASSED: All tests Baofeng BF-888 Banks SKIPPED: Banks not supported Baofeng F-11 Detect PASSED: All tests Baofeng F-11 CopyAll PASSED: All tests Baofeng F-11 Clone PASSED: All tests Baofeng F-11 BruteForce PASSED: All tests Baofeng F-11 Edges PASSED: All tests Baofeng F-11 Banks SKIPPED: Banks not supported Baofeng UV-3R Detect PASSED: All tests Baofeng UV-3R CopyAll PASSED: All tests Baofeng UV-3R Clone PASSED: All tests Baofeng UV-3R BruteForce PASSED: All tests Baofeng UV-3R Edges PASSED: All tests Baofeng UV-3R Banks SKIPPED: Banks not supported Baofeng UV-5R Detect PASSED: All tests Baofeng UV-5R CopyAll PASSED: All tests Baofeng UV-5R Clone PASSED: All tests Baofeng UV-5R BruteForce PASSED: All tests Baofeng UV-5R Edges PASSED: All tests Baofeng UV-5R Banks SKIPPED: Banks not supported Baofeng UV-B5 Detect PASSED: All tests Baofeng UV-B5 CopyAll PASSED: All tests Baofeng UV-B5 Clone PASSED: All tests Baofeng UV-B5 BruteForce PASSED: All tests Baofeng UV-B5 Edges PASSED: All tests Baofeng UV-B5 Banks SKIPPED: Banks not supported Icom IC-208H Detect PASSED: All tests Icom IC-208H CopyAll PASSED: All tests Icom IC-208H Clone PASSED: All tests Icom IC-208H BruteForce PASSED: All tests Icom IC-208H Edges PASSED: All tests Icom IC-208H Banks PASSED: All tests Icom IC-2100H Detect PASSED: All tests Icom IC-2100H CopyAll PASSED: All tests Icom IC-2100H Clone PASSED: All tests Icom IC-2100H BruteForce PASSED: All tests Icom IC-2100H Edges PASSED: All tests Icom IC-2100H Banks SKIPPED: Banks not supported Icom IC-2200H Detect PASSED: All tests Icom IC-2200H CopyAll PASSED: All tests Icom IC-2200H Clone PASSED: All tests Icom IC-2200H BruteForce PASSED: All tests Icom IC-2200H Edges PASSED: All tests Icom IC-2200H Banks PASSED: All tests Icom IC-2720H Detect PASSED: All tests Icom IC-2720H CopyAll PASSED: All tests Icom IC-2720H Clone PASSED: All tests Icom IC-2720H BruteForce PASSED: All tests Icom IC-2720H Edges PASSED: All tests Icom IC-2720H Banks PASSED: All tests Icom IC-2820H Detect PASSED: All tests Icom IC-2820H CopyAll PASSED: All tests Icom IC-2820H Clone PASSED: All tests Icom IC-2820H BruteForce PASSED: All tests Icom IC-2820H Edges PASSED: All tests Icom IC-2820H Banks PASSED: All tests Icom IC-Q7A Detect PASSED: All tests Icom IC-Q7A CopyAll PASSED: All tests Icom IC-Q7A Clone PASSED: All tests Icom IC-Q7A BruteForce PASSED: All tests Icom IC-Q7A Edges PASSED: All tests Icom IC-Q7A Banks SKIPPED: Banks not supported Icom IC-T70 Detect PASSED: All tests Icom IC-T70 CopyAll PASSED: All tests Icom IC-T70 Clone PASSED: All tests Icom IC-T70 BruteForce PASSED: All tests Icom IC-T70 Edges PASSED: All tests Icom IC-T70 Banks PASSED: All tests Icom IC-T7H Detect PASSED: All tests Icom IC-T7H CopyAll PASSED: All tests Icom IC-T7H Clone PASSED: All tests Icom IC-T7H BruteForce PASSED: All tests Icom IC-T7H Edges PASSED: All tests Icom IC-T7H Banks SKIPPED: Banks not supported Icom IC-T8A Detect PASSED: All tests Icom IC-T8A CopyAll PASSED: All tests Icom IC-T8A Clone PASSED: All tests Icom IC-T8A BruteForce PASSED: All tests Icom IC-T8A Edges PASSED: All tests Icom IC-T8A Banks SKIPPED: Banks not supported Icom IC-V82/U82 Detect PASSED: All tests Icom IC-V82/U82 CopyAll PASSED: All tests Icom IC-V82/U82 Clone PASSED: All tests Icom IC-V82/U82 BruteForce PASSED: All tests Icom IC-V82/U82 Edges PASSED: All tests Icom IC-V82/U82 Banks PASSED: All tests Icom IC-W32A VHF Detect PASSED: All tests Icom IC-W32A VHF CopyAll PASSED: All tests Icom IC-W32A VHF Clone PASSED: All tests Icom IC-W32A VHF BruteForce PASSED: All tests Icom IC-W32A VHF Edges PASSED: All tests Icom IC-W32A VHF Banks SKIPPED: Banks not supported Icom IC-W32A UHF Detect PASSED: All tests Icom IC-W32A UHF CopyAll PASSED: All tests Icom IC-W32A UHF Clone PASSED: All tests Icom IC-W32A UHF BruteForce PASSED: All tests Icom IC-W32A UHF Edges PASSED: All tests Icom IC-W32A UHF Banks SKIPPED: Banks not supported Icom ID-31A Detect PASSED: All tests Icom ID-31A CopyAll PASSED: All tests Icom ID-31A Clone PASSED: All tests Icom ID-31A BruteForce PASSED: All tests Icom ID-31A Edges PASSED: All tests Icom ID-31A Banks PASSED: All tests Icom ID-51A Detect PASSED: All tests Icom ID-51A CopyAll PASSED: All tests Icom ID-51A Clone PASSED: All tests Icom ID-51A BruteForce PASSED: All tests Icom ID-51A Edges PASSED: All tests Icom ID-51A Banks PASSED: All tests Icom ID-800H v2 Detect PASSED: All tests Icom ID-800H v2 CopyAll PASSED: All tests Icom ID-800H v2 Clone PASSED: All tests Icom ID-800H v2 BruteForce PASSED: All tests Icom ID-800H v2 Edges PASSED: All tests Icom ID-800H v2 Banks PASSED: All tests Icom ID-880H Detect PASSED: All tests Icom ID-880H CopyAll PASSED: All tests Icom ID-880H Clone PASSED: All tests Icom ID-880H BruteForce PASSED: All tests Icom ID-880H Edges PASSED: All tests Icom ID-880H Banks PASSED: All tests Jetstream JT220M Detect PASSED: All tests Jetstream JT220M CopyAll PASSED: All tests Jetstream JT220M Clone PASSED: All tests Jetstream JT220M BruteForce PASSED: All tests Jetstream JT220M Edges PASSED: All tests Jetstream JT220M Banks SKIPPED: Banks not supported Kenwood TH-D72 (clone Detect PASSED: All tests Kenwood TH-D72 (clone CopyAll PASSED: All tests Kenwood TH-D72 (clone Clone PASSED: All tests Kenwood TH-D72 (clone BruteForce PASSED: All tests Kenwood TH-D72 (clone Edges PASSED: All tests Kenwood TH-D72 (clone Banks SKIPPED: Banks not supported Kenwood TK-8102 Detect PASSED: All tests Kenwood TK-8102 CopyAll PASSED: All tests Kenwood TK-8102 Clone PASSED: All tests Kenwood TK-8102 BruteForce PASSED: All tests Kenwood TK-8102 Edges PASSED: All tests Kenwood TK-8102 Banks SKIPPED: Banks not supported Polmar DB-50M Detect PASSED: All tests Polmar DB-50M CopyAll PASSED: All tests Polmar DB-50M Clone PASSED: All tests Polmar DB-50M BruteForce PASSED: All tests Polmar DB-50M Edges PASSED: All tests Polmar DB-50M Banks SKIPPED: Banks not supported Puxing PX-2R Detect PASSED: All tests Puxing PX-2R CopyAll PASSED: All tests Puxing PX-2R Clone PASSED: All tests Puxing PX-2R BruteForce PASSED: All tests Puxing PX-2R Edges PASSED: All tests Puxing PX-2R Banks SKIPPED: Banks not supported Puxing PX-777 Detect PASSED: All tests Puxing PX-777 CopyAll PASSED: All tests Puxing PX-777 Clone PASSED: All tests Puxing PX-777 BruteForce PASSED: All tests Puxing PX-777 Edges PASSED: All tests Puxing PX-777 Banks SKIPPED: Banks not supported TYT TH-UV3R Detect PASSED: All tests TYT TH-UV3R CopyAll PASSED: All tests TYT TH-UV3R Clone PASSED: All tests TYT TH-UV3R BruteForce PASSED: All tests TYT TH-UV3R Edges PASSED: All tests TYT TH-UV3R Banks SKIPPED: Banks not supported TYT TH-UVF1 Detect PASSED: All tests TYT TH-UVF1 CopyAll PASSED: All tests TYT TH-UVF1 Clone PASSED: All tests TYT TH-UVF1 BruteForce PASSED: All tests TYT TH-UVF1 Edges PASSED: All tests TYT TH-UVF1 Banks SKIPPED: Banks not supported Vertex VXA-700 Detect PASSED: All tests Vertex VXA-700 CopyAll PASSED: All tests Vertex VXA-700 Clone PASSED: All tests Vertex VXA-700 BruteForce PASSED: All tests Vertex VXA-700 Edges PASSED: All tests Vertex VXA-700 Banks SKIPPED: Banks not supported Wouxun KG-816 Detect PASSED: All tests Wouxun KG-816 CopyAll PASSED: All tests Wouxun KG-816 Clone PASSED: All tests Wouxun KG-816 BruteForce PASSED: All tests Wouxun KG-816 Edges PASSED: All tests Wouxun KG-816 Banks SKIPPED: Banks not supported Wouxun KG-818 Detect PASSED: All tests Wouxun KG-818 CopyAll PASSED: All tests Wouxun KG-818 Clone PASSED: All tests Wouxun KG-818 BruteForce PASSED: All tests Wouxun KG-818 Edges PASSED: All tests Wouxun KG-818 Banks SKIPPED: Banks not supported Wouxun KG-UV6 Detect PASSED: All tests Wouxun KG-UV6 CopyAll PASSED: All tests Wouxun KG-UV6 Clone PASSED: All tests Wouxun KG-UV6 BruteForce PASSED: All tests Wouxun KG-UV6 Edges PASSED: All tests Wouxun KG-UV6 Banks SKIPPED: Banks not supported Wouxun KG-UVD1P Detect PASSED: All tests Wouxun KG-UVD1P CopyAll PASSED: All tests Wouxun KG-UVD1P Clone PASSED: All tests Wouxun KG-UVD1P BruteForce PASSED: All tests Wouxun KG-UVD1P Edges PASSED: All tests Wouxun KG-UVD1P Banks SKIPPED: Banks not supported Yaesu FT-1802M Detect PASSED: All tests Yaesu FT-1802M CopyAll PASSED: All tests Yaesu FT-1802M Clone PASSED: All tests Yaesu FT-1802M BruteForce PASSED: All tests Yaesu FT-1802M Edges PASSED: All tests Yaesu FT-1802M Banks SKIPPED: Banks not supported Yaesu FT-2800M Detect PASSED: All tests Yaesu FT-2800M CopyAll PASSED: All tests Yaesu FT-2800M Clone PASSED: All tests Yaesu FT-2800M BruteForce PASSED: All tests Yaesu FT-2800M Edges PASSED: All tests Yaesu FT-2800M Banks SKIPPED: Banks not supported Yaesu FT-60 Detect PASSED: All tests Yaesu FT-60 CopyAll PASSED: All tests Yaesu FT-60 Clone PASSED: All tests Yaesu FT-60 BruteForce PASSED: All tests Yaesu FT-60 Edges PASSED: All tests Yaesu FT-60 Banks SKIPPED: Banks not supported Yaesu FT-7800/7900 Detect PASSED: All tests Yaesu FT-7800/7900 CopyAll PASSED: All tests Yaesu FT-7800/7900 Clone PASSED: All tests Yaesu FT-7800/7900 BruteForce PASSED: All tests Yaesu FT-7800/7900 Edges PASSED: All tests Yaesu FT-7800/7900 Banks PASSED: All tests Yaesu FT-817 Detect PASSED: All tests Yaesu FT-817 CopyAll PASSED: All tests Yaesu FT-817 Clone PASSED: All tests Yaesu FT-817 BruteForce PASSED: All tests Yaesu FT-817 Edges PASSED: All tests Yaesu FT-817 Banks SKIPPED: Banks not supported Yaesu FT-817ND Detect PASSED: All tests Yaesu FT-817ND CopyAll PASSED: All tests Yaesu FT-817ND Clone PASSED: All tests Yaesu FT-817ND BruteForce PASSED: All tests Yaesu FT-817ND Edges PASSED: All tests Yaesu FT-817ND Banks SKIPPED: Banks not supported Yaesu FT-817ND (US) Detect PASSED: All tests Yaesu FT-817ND (US) CopyAll PASSED: All tests Yaesu FT-817ND (US) Clone PASSED: All tests Yaesu FT-817ND (US) BruteForce PASSED: All tests Yaesu FT-817ND (US) Edges PASSED: All tests Yaesu FT-817ND (US) Banks SKIPPED: Banks not supported Yaesu FT-857/897 Detect PASSED: All tests Yaesu FT-857/897 CopyAll PASSED: All tests Yaesu FT-857/897 Clone PASSED: All tests Yaesu FT-857/897 BruteForce PASSED: All tests Yaesu FT-857/897 Edges PASSED: All tests Yaesu FT-857/897 Banks SKIPPED: Banks not supported Yaesu FT-857/897 (U Detect PASSED: All tests Yaesu FT-857/897 (U CopyAll PASSED: All tests Yaesu FT-857/897 (U Clone PASSED: All tests Yaesu FT-857/897 (U BruteForce PASSED: All tests Yaesu FT-857/897 (U Edges PASSED: All tests Yaesu FT-857/897 (U Banks SKIPPED: Banks not supported Yaesu FT-8800 Left Detect PASSED: All tests Yaesu FT-8800 Left CopyAll PASSED: All tests Yaesu FT-8800 Left Clone PASSED: All tests Yaesu FT-8800 Left BruteForce PASSED: All tests Yaesu FT-8800 Left Edges PASSED: All tests Yaesu FT-8800 Left Banks PASSED: All tests Yaesu FT-8800 Right Detect PASSED: All tests Yaesu FT-8800 Right CopyAll PASSED: All tests Yaesu FT-8800 Right Clone PASSED: All tests Yaesu FT-8800 Right BruteForce PASSED: All tests Yaesu FT-8800 Right Edges PASSED: All tests Yaesu FT-8800 Right Banks PASSED: All tests Yaesu FT-8900 Detect PASSED: All tests Yaesu FT-8900 CopyAll PASSED: All tests Yaesu FT-8900 Clone PASSED: All tests Yaesu FT-8900 BruteForce PASSED: All tests Yaesu FT-8900 Edges PASSED: All tests Yaesu FT-8900 Banks SKIPPED: Banks not supported Yaesu FTM-350 Left Detect PASSED: All tests Yaesu FTM-350 Left CopyAll PASSED: All tests Yaesu FTM-350 Left Clone PASSED: All tests Yaesu FTM-350 Left BruteForce PASSED: All tests Yaesu FTM-350 Left Edges PASSED: All tests Yaesu FTM-350 Left Banks SKIPPED: Banks not supported Yaesu FTM-350 Right Detect PASSED: All tests Yaesu FTM-350 Right CopyAll PASSED: All tests Yaesu FTM-350 Right Clone PASSED: All tests Yaesu FTM-350 Right BruteForce PASSED: All tests Yaesu FTM-350 Right Edges PASSED: All tests Yaesu FTM-350 Right Banks SKIPPED: Banks not supported Yaesu VX-2 Detect PASSED: All tests Yaesu VX-2 CopyAll PASSED: All tests Yaesu VX-2 Clone PASSED: All tests Yaesu VX-2 BruteForce PASSED: All tests Yaesu VX-2 Edges PASSED: All tests Yaesu VX-2 Banks PASSED: All tests Yaesu VX-3 Detect PASSED: All tests Yaesu VX-3 CopyAll PASSED: All tests Yaesu VX-3 Clone PASSED: All tests Yaesu VX-3 BruteForce PASSED: All tests Yaesu VX-3 Edges PASSED: All tests Yaesu VX-3 Banks PASSED: All tests Yaesu VX-5 Detect PASSED: All tests Yaesu VX-5 CopyAll PASSED: All tests Yaesu VX-5 Clone PASSED: All tests Yaesu VX-5 BruteForce PASSED: All tests Yaesu VX-5 Edges PASSED: All tests Yaesu VX-5 Banks PASSED: All tests Yaesu VX-6 Detect PASSED: All tests Yaesu VX-6 CopyAll PASSED: All tests Yaesu VX-6 Clone PASSED: All tests Yaesu VX-6 BruteForce PASSED: All tests Yaesu VX-6 Edges PASSED: All tests Yaesu VX-6 Banks PASSED: All tests Yaesu VX-7 Detect PASSED: All tests Yaesu VX-7 CopyAll PASSED: All tests Yaesu VX-7 Clone PASSED: All tests Yaesu VX-7 BruteForce PASSED: All tests Yaesu VX-7 Edges PASSED: All tests Yaesu VX-7 Banks PASSED: All tests Yaesu VX-8 R Detect PASSED: All tests Yaesu VX-8 R CopyAll PASSED: All tests Yaesu VX-8 R Clone PASSED: All tests Yaesu VX-8 R BruteForce PASSED: All tests Yaesu VX-8 R Edges PASSED: All tests Yaesu VX-8 R Banks PASSED: All tests ---------------------------------------------------------------------- Results: TOTAL : 342 FAILED : 0 SKIPPED: 38 PASSED : 304 CRASHED: 0 Patch 'tip' is OK ================================================ Tests OK Email was triggered for: Success Sending email for trigger: Success

1 0

[chirp_devel] [PATCH] fix bad cable errors for some users on upload #1397 (2)
by Jens Jensen 06 Feb '14

06 Feb '14

# HG changeset patch # User Jens Jensen <kd4tjx(a)yahoo.com> # Date 1391521135 21600 # Node ID 15921d1f283385b04fe8e52a44398c858d4f7684 # Parent 7ed1f8fad43b085b2339ffccafb17fcf0edbd446 fix bad cable errors for some users on upload #1397 (2) Had port open logic backwards in first attempt. Always drink coffee beforehand! diff -r 7ed1f8fad43b -r 15921d1f2833 chirpui/mainapp.py --- a/chirpui/mainapp.py Tue Feb 04 06:46:57 2014 -0600 +++ b/chirpui/mainapp.py Tue Feb 04 07:38:55 2014 -0600 @@ -656,9 +656,9 @@ if not settings: return prompts = radio.get_prompts() - - if prompts.open_port_before_upload_prompt == True: - print "Opening port before pre_upload prompt." + + if prompts.open_port_before_upload_prompt == False: + print "Opening port after pre_upload prompt." self._show_instructions(radio, prompts.pre_upload) if isinstance(radio, chirp_common.ExperimentalRadio) and \ @@ -678,8 +678,8 @@ d.destroy() return - if prompts.open_port_before_upload_prompt == False: - print "Opening port after pre_upload prompt." + if prompts.open_port_before_upload_prompt == True: + print "Opening port before pre_upload prompt." self._show_instructions(radio, prompts.pre_upload) radio.set_pipe(ser)

3 3

[chirp_devel] [PATCH] [ic-2820] fix unsupported chars in channel name #1425
by Jens Jensen 05 Feb '14

05 Feb '14

# HG changeset patch # User Jens Jensen <kd4tjx(a)yahoo.com> # Date 1391642490 21600 # Wed Feb 05 17:21:30 2014 -0600 # Node ID d9ae7fb5b990274110249bd49d4301824814a772 # Parent 478f04e14bc75cbecd5f183a71540e7387834c54 [ic-2820] fix unsupported chars in channel name #1425 updating supported charset from alphanumeric to ascii. diff -r 478f04e14bc7 -r d9ae7fb5b990 chirp/ic2820.py --- a/chirp/ic2820.py Wed Feb 05 17:20:36 2014 -0600 +++ b/chirp/ic2820.py Wed Feb 05 17:21:30 2014 -0600 @@ -176,7 +176,7 @@ rf.valid_tuning_steps = list(chirp_common.TUNING_STEPS) rf.valid_bands = [(118000000, 999990000)] rf.valid_skips = ["", "S", "P"] - rf.valid_characters = chirp_common.CHARSET_ALPHANUMERIC + rf.valid_characters = chirp_common.CHARSET_ASCII rf.valid_name_length = 8 rf.valid_special_chans = sorted(_get_special().keys())

1 0

[chirp_devel] Fwd: French translation volunteer
by Ben Weiss 05 Feb '14

05 Feb '14

Hello Matthieu, I think this meant to go to the mailing list, not only me, but I will try to answer. To create a translation, you'll need a program called poedit. ( http://www.poedit.net/download.php) Please create a new issue here ( http://chirp.danplanet.com/projects/chirp/issues/new ) to request a new translation, and we'll get the file you'll need for the translation. Note you'll need to register yourself on the website, if you have not already, to create an issue. 73 de KC9UUM - Ben ---------- Forwarded message ---------- From: F4ACU - Matthieu LAPADU-HARGUES - 37 <f4acu(a)fnrasec.org> Date: Mon, Jan 27, 2014 at 2:25 AM Subject: CHIRP - French translation volunteer To: kc9uum(a)gmail.com Hi, I use Chirp (Linux) with VX-8GE and FT-7900 for several months and I like this app ! With my ham radio SAR association, we want to use Chirp for the new UV5R fleet. Are you interested in a French translation ? How can I help you ? But I am not a programmer, juste simple OM. Best 73 from F4ACU -- Matthieu LAPADU-HARGUES F4ACU - Esvres - JN07JG ADRASEC 37

1 0

Re: [chirp_devel] General inquiry on adding "settings"
by chirp.cordless＠xoxy.net 04 Feb '14

04 Feb '14

As Tom requested, I'm moving this discussion here from chirp_users. I've registered to receive mail (digest form) on this list. Thanks for the response, it was what I was hoping for. I've looked over the FT-60 MEM_FORMAT structure you pointed me at, and it looks like something I can definitely handle, maybe with a little experimentation and poking around the code to resolve things like bit ordering etc. I've seen the chirp developers tools option to view and diff the raw data. I think I'm probably self-contained as far as what I need to know to do this, but I'll ask if I get stumped. I don't want to set expectations that I'm committing to do this until I get into it and size up just how much work is involved, but my sense is it's a reasonably finite task for one radio, and I'll get started on it for the FT-60. Don't open a feature bug on this, plenty of time to do that when I have an extended MEM_FORMAT struct ready to merge. A couple of months? My only request now is that if someone is already working on adding FT-60 settings, stop me now so I don't waste my time. However, I do have one issue that needs to be corrected that I noticed in looking over the referenced ft60.py The power levels described in lines 154-156 are incorrect. The FT-60 is 5w2w/0.5w, not 5w/2.5w/1w. See user's manual pages 15 and 79. I haven't looked to see what the values are used for, if anything, but they're currently wrong except for high. Thanks, -dan > Date: Sun, 2 Feb 2014 15:20:00 -0800 > From: Tom Hayward <esarfl(a)gmail.com> > Subject: Re: [chirp_users] General inquiry on adding "settings" > > On Feb 2, 2014 1:05 PM, <chirp.cordless(a)xoxy.net> wrote: >> I haven't seen this kind of development meta-discussion, so here goes: > > This kind of discussion usually happens on the chirp_devel mailling list: > http://intrepid.danplanet.com/mailman/listinfo/chirp_devel > >> I guess the process would be to change a setting via the radio's buttons, >> read into chirp. and record what changed in the data stream. Rinse and >> repeat. If someone (me, for example) were to do that and provide the map, >> would that likely be enough to have someone else pick it up and code it > into Chirp? > > Yep, you've got the process figured out. > >> And if so, what form should the 'map' take? Several hundred complete >> radio images seems less than optimal to me, for several reasons, >> most obviously that it still needs interpretation to code from. >> I could probably do a Python const data structure or equivalent >> if pointed to an example. > > I think the best option would be for you to learn the syntax for the Chirp > bitwise memory format. It takes its inspiration from c structs, so it > should be very familiar to you. It is not Python, but a syntax Dan created > to represent radio memory structures. It suits Chirp very well. You can > find examples in every radio driver, usually at the top of the file in a > string called MEM_FORMAT: > http://chirp.danplanet.com/projects/chirp/repository/entry/chirp/ft60.py#L1… > > If you can define the radio's memory layout in that format, and document > the associated values (e.g., APO: 0: off, 1: 30m, 2: 1h, 3: 2h, etc.), then > another Chirp dev should be able to pick up your work and add the GUI > elements. > > Please send your reply to the chirp_devel list so the right audience sees > it. > > Tom KD7LXL

4 3

[chirp_devel] [PATCH] fix bad cable errors for some users on upload #1397
by Jens Jensen 04 Feb '14

04 Feb '14

# HG changeset patch # User Jens Jensen <kd4tjx(a)yahoo.com> # Date 1391518017 21600 # Node ID 7ed1f8fad43b085b2339ffccafb17fcf0edbd446 # Parent db80e2e04c0e628bcd66f75d01f2a07a56ac16fc fix bad cable errors for some users on upload #1397 some users are seeing bad cable errors on upload, which may be related to changes made in #1187 for ft-90 to open port before pre_upload prompt. now making this an optional behavior (defaults to showing prompt first) ft-90 will use this optional behavior to open the port before showing prompt. diff -r db80e2e04c0e -r 7ed1f8fad43b chirp/chirp_common.py --- a/chirp/chirp_common.py Sun Jan 26 16:16:02 2014 -0500 +++ b/chirp/chirp_common.py Tue Feb 04 06:46:57 2014 -0600 @@ -650,6 +650,7 @@ experimental = None pre_download = None pre_upload = None + open_port_before_upload_prompt = False BOOLEAN = [True, False] diff -r db80e2e04c0e -r 7ed1f8fad43b chirp/ft90.py --- a/chirp/ft90.py Sun Jan 26 16:16:02 2014 -0500 +++ b/chirp/ft90.py Tue Feb 04 06:46:57 2014 -0600 @@ -199,6 +199,7 @@ 3. Replace mic with PC programming cable. 4. Press the [DISP/SS] key ("R" will appear on the lower left of LCD).""")) + rp.open_port_before_upload_prompt = True return rp @classmethod diff -r db80e2e04c0e -r 7ed1f8fad43b chirpui/mainapp.py --- a/chirpui/mainapp.py Sun Jan 26 16:16:02 2014 -0500 +++ b/chirpui/mainapp.py Tue Feb 04 06:46:57 2014 -0600 @@ -655,6 +655,11 @@ d.destroy() if not settings: return + prompts = radio.get_prompts() + + if prompts.open_port_before_upload_prompt == True: + print "Opening port before pre_upload prompt." + self._show_instructions(radio, prompts.pre_upload) if isinstance(radio, chirp_common.ExperimentalRadio) and \ not self._confirm_experimental(radio.__class__): @@ -673,7 +678,9 @@ d.destroy() return - self._show_instructions(radio, radio.get_prompts().pre_upload) + if prompts.open_port_before_upload_prompt == False: + print "Opening port after pre_upload prompt." + self._show_instructions(radio, prompts.pre_upload) radio.set_pipe(ser)

1 0