- Developers - lists.chirpmyradio.com

Re: [chirp_devel] [chirp_users] UV5R+
by Tom Hayward 22 May '15

22 May '15

On Fri, May 22, 2015 at 2:59 PM, Jim Unroe <rock.unroe(a)gmail.com> wrote: > Looks to me like your radio is not a UV-5R+ but rather a radio with 3 > power levels like the BF-F8HP or UV-5RTP which would use BF-F8HP for > the model selection. Jim, Can we do a Baofeng auto-detect mode, like we do with Kenwood and Icom? An error message like "unsupported firmware version:NR-323F8HP-1" hints to me that we could provide some programatic path to the appropriate driver. Tom

2 1

[chirp_devel] [PATCH] [FT-1D] Sanitize aprs message string before loading them in settings
by Marco Filippi IZ3GME 21 May '15

21 May '15

# HG changeset patch # User Marco Filippi <iz3gme.marco(a)gmail.com> # Date 1432201135 -7200 # Thu May 21 11:38:55 2015 +0200 # Node ID 8c887ff64aaf1072354f6461a25d01fcacdd555a # Parent d5d7c8a069537939ec39575b6eabbc36c40e5934 [FT-1D] Sanitize aprs message string before loading them in settings Aprs messages can contain non printable chars, replace them with * to obtain a printable string Fix #2509 diff --git a/chirp/chirp_common.py b/chirp/chirp_common.py --- a/chirp/chirp_common.py +++ b/chirp/chirp_common.py @@ -1462,3 +1462,12 @@ return ((txmode, txval, txpol), (rxmode, rxval, rxpol)) + + +def sanitize_string(astring, validcharset=CHARSET_ASCII, replacechar='*'): + myfilter = ''.join( + [ + [replacechar, chr(x)][chr(x) in validcharset] + for x in xrange(256) + ]) + return astring.translate(myfilter) diff --git a/chirp/drivers/ft1d.py b/chirp/drivers/ft1d.py --- a/chirp/drivers/ft1d.py +++ b/chirp/drivers/ft1d.py @@ -957,16 +957,21 @@ for index in range(0, 60): if aprs_msg[index].flag != 255: + astring = \ + str(aprs_msg[index].dst_callsign).partition("\xFF")[0] + val = RadioSettingValueString( - 0, 9, str(aprs_msg[index].dst_callsign).rstrip("\xFF") + + 0, 9, chirp_common.sanitize_string(astring) + "-%d" % aprs_msg[index].dst_callsign_ssid) rs = RadioSetting( "aprs_msg.dst_callsign%d" % index, "Dst Callsign %d" % index, val) menu.append(rs) + astring = \ + str(aprs_msg[index].path_and_body).partition("\xFF")[0] val = RadioSettingValueString( - 0, 66, str(aprs_msg[index].path_and_body).rstrip("\xFF")) + 0, 66, chirp_common.sanitize_string(astring)) rs = RadioSetting( "aprs_msg.path_and_body%d" % index, "Body", val) menu.append(rs)

1 0

[chirp_devel] Build test results: Failure
by Build System 12 May '15

12 May '15

Tested changes: [Dan Smith <dsmith(a)danplanet.com>] Add test image for TYT TH9000 from David Dannin Related to #1035 [David Fannin <dfannin(a)sushisoft.com>] [Th9000] New model driver for TYT TH9000D radios - fixed base class #1035 [Marco Filippi <iz3gme.marco(a)gmail.com>] Add missing countries to przemienniki.net query form Implement #2569 Full log: Started by an SCM change Building in workspace /var/lib/jenkins/jobs/chirp-test/workspace [workspace] $ hg showconfig paths.default [workspace] $ hg pull --rev default [workspace] $ hg update --clean --rev default 3 files updated, 0 files merged, 0 files removed, 0 files unresolved [workspace] $ hg log --rev . --template {node} [workspace] $ hg log --rev . --template {rev} [workspace] $ hg log --rev a16bb2190c66a496a0d3867106256884a4058ce9 [workspace] $ hg log --template "<changeset node='{node}' author='{author|xmlescape}' rev='{rev}' date='{date}'><msg>{desc|xmlescape}</msg><added>{file_adds|stringify|xmlescape}</added><deleted>{file_dels|stringify|xmlescape}</deleted><files>{files|stringify|xmlescape}</files><parents>{parents}</parents></changeset>\n" --rev default:0 --follow --prune a16bb2190c66a496a0d3867106256884a4058ce9 No emails were triggered. [workspace] $ /bin/sh -xe /tmp/hudson3854442030468403272.sh + ./run_all_tests.sh Failure: SyntaxError (invalid syntax (bitwise.py, line 94)) ... ERROR Failure: SyntaxError (invalid syntax (test_chirp_common.py, line 211)) ... ERROR Failure: ImportError (No module named 'mox') ... ERROR Failure: ImportError (No module named 'mox') ... ERROR Failure: ImportError (No module named 'mox') ... ERROR Failure: ImportError (No module named 'mox') ... ERROR Failure: ImportError (No module named 'mox') ... ERROR Failure: ImportError (No module named 'mox') ... ERROR ====================================================================== ERROR: Failure: SyntaxError (invalid syntax (bitwise.py, line 94)) ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/local/lib/python3.3/dist-packages/nose/failure.py", line 39, in runTest raise self.exc_val.with_traceback(self.tb) File "/usr/local/lib/python3.3/dist-packages/nose/loader.py", line 420, in loadTestsFromName addr.filename, addr.module) File "/usr/local/lib/python3.3/dist-packages/nose/importer.py", line 47, in importFromPath return self.importFromDir(dir_path, fqname) File "/usr/local/lib/python3.3/dist-packages/nose/importer.py", line 94, in importFromDir mod = load_module(part_fqname, fh, filename, desc) File "/usr/lib/python3.3/imp.py", line 180, in load_module return load_source(name, filename, file) File "/usr/lib/python3.3/imp.py", line 119, in load_source _LoadSourceCompatibility(name, pathname, file).load_module(name) File "<frozen importlib._bootstrap>", line 584, in _check_name_wrapper File "<frozen importlib._bootstrap>", line 1022, in load_module File "<frozen importlib._bootstrap>", line 1003, in load_module File "<frozen importlib._bootstrap>", line 560, in module_for_loader_wrapper File "<frozen importlib._bootstrap>", line 868, in _load_module File "<frozen importlib._bootstrap>", line 313, in _call_with_frames_removed File "/var/lib/jenkins/jobs/chirp-test/workspace/tests/unit/test_bitwise.py", line 18, in <module> from chirp import bitwise File "/var/lib/jenkins/jobs/chirp-test/workspace/chirp/bitwise.py", line 94 print "%s%s: %s" % (" " * level, i[0], i[1]) ^ SyntaxError: invalid syntax ====================================================================== ERROR: Failure: SyntaxError (invalid syntax (test_chirp_common.py, line 211)) ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/local/lib/python3.3/dist-packages/nose/failure.py", line 39, in runTest raise self.exc_val.with_traceback(self.tb) File "/usr/local/lib/python3.3/dist-packages/nose/loader.py", line 420, in loadTestsFromName addr.filename, addr.module) File "/usr/local/lib/python3.3/dist-packages/nose/importer.py", line 47, in importFromPath return self.importFromDir(dir_path, fqname) File "/usr/local/lib/python3.3/dist-packages/nose/importer.py", line 94, in importFromDir mod = load_module(part_fqname, fh, filename, desc) File "/usr/lib/python3.3/imp.py", line 180, in load_module return load_source(name, filename, file) File "/usr/lib/python3.3/imp.py", line 119, in load_source _LoadSourceCompatibility(name, pathname, file).load_module(name) File "<frozen importlib._bootstrap>", line 584, in _check_name_wrapper File "<frozen importlib._bootstrap>", line 1022, in load_module File "<frozen importlib._bootstrap>", line 1003, in load_module File "<frozen importlib._bootstrap>", line 560, in module_for_loader_wrapper File "<frozen importlib._bootstrap>", line 853, in _load_module File "<frozen importlib._bootstrap>", line 980, in get_code File "<frozen importlib._bootstrap>", line 313, in _call_with_frames_removed File "/var/lib/jenkins/jobs/chirp-test/workspace/tests/unit/test_chirp_common.py", line 211 print freq ^ SyntaxError: invalid syntax ====================================================================== ERROR: Failure: ImportError (No module named 'mox') ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/local/lib/python3.3/dist-packages/nose/failure.py", line 39, in runTest raise self.exc_val.with_traceback(self.tb) File "/usr/local/lib/python3.3/dist-packages/nose/loader.py", line 420, in loadTestsFromName addr.filename, addr.module) File "/usr/local/lib/python3.3/dist-packages/nose/importer.py", line 47, in importFromPath return self.importFromDir(dir_path, fqname) File "/usr/local/lib/python3.3/dist-packages/nose/importer.py", line 94, in importFromDir mod = load_module(part_fqname, fh, filename, desc) File "/usr/lib/python3.3/imp.py", line 180, in load_module return load_source(name, filename, file) File "/usr/lib/python3.3/imp.py", line 119, in load_source _LoadSourceCompatibility(name, pathname, file).load_module(name) File "<frozen importlib._bootstrap>", line 584, in _check_name_wrapper File "<frozen importlib._bootstrap>", line 1022, in load_module File "<frozen importlib._bootstrap>", line 1003, in load_module File "<frozen importlib._bootstrap>", line 560, in module_for_loader_wrapper File "<frozen importlib._bootstrap>", line 868, in _load_module File "<frozen importlib._bootstrap>", line 313, in _call_with_frames_removed File "/var/lib/jenkins/jobs/chirp-test/workspace/tests/unit/test_import_logic.py", line 1, in <module> from tests.unit import base File "/var/lib/jenkins/jobs/chirp-test/workspace/tests/unit/base.py", line 2, in <module> import mox ImportError: No module named 'mox' ====================================================================== ERROR: Failure: ImportError (No module named 'mox') ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/local/lib/python3.3/dist-packages/nose/failure.py", line 39, in runTest raise self.exc_val.with_traceback(self.tb) File "/usr/local/lib/python3.3/dist-packages/nose/loader.py", line 420, in loadTestsFromName addr.filename, addr.module) File "/usr/local/lib/python3.3/dist-packages/nose/importer.py", line 47, in importFromPath return self.importFromDir(dir_path, fqname) File "/usr/local/lib/python3.3/dist-packages/nose/importer.py", line 94, in importFromDir mod = load_module(part_fqname, fh, filename, desc) File "/usr/lib/python3.3/imp.py", line 180, in load_module return load_source(name, filename, file) File "/usr/lib/python3.3/imp.py", line 119, in load_source _LoadSourceCompatibility(name, pathname, file).load_module(name) File "<frozen importlib._bootstrap>", line 584, in _check_name_wrapper File "<frozen importlib._bootstrap>", line 1022, in load_module File "<frozen importlib._bootstrap>", line 1003, in load_module File "<frozen importlib._bootstrap>", line 560, in module_for_loader_wrapper File "<frozen importlib._bootstrap>", line 868, in _load_module File "<frozen importlib._bootstrap>", line 313, in _call_with_frames_removed File "/var/lib/jenkins/jobs/chirp-test/workspace/tests/unit/test_mappingmodel.py", line 16, in <module> from tests.unit import base File "/var/lib/jenkins/jobs/chirp-test/workspace/tests/unit/base.py", line 2, in <module> import mox ImportError: No module named 'mox' ====================================================================== ERROR: Failure: ImportError (No module named 'mox') ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/local/lib/python3.3/dist-packages/nose/failure.py", line 39, in runTest raise self.exc_val.with_traceback(self.tb) File "/usr/local/lib/python3.3/dist-packages/nose/loader.py", line 420, in loadTestsFromName addr.filename, addr.module) File "/usr/local/lib/python3.3/dist-packages/nose/importer.py", line 47, in importFromPath return self.importFromDir(dir_path, fqname) File "/usr/local/lib/python3.3/dist-packages/nose/importer.py", line 94, in importFromDir mod = load_module(part_fqname, fh, filename, desc) File "/usr/lib/python3.3/imp.py", line 180, in load_module return load_source(name, filename, file) File "/usr/lib/python3.3/imp.py", line 119, in load_source _LoadSourceCompatibility(name, pathname, file).load_module(name) File "<frozen importlib._bootstrap>", line 584, in _check_name_wrapper File "<frozen importlib._bootstrap>", line 1022, in load_module File "<frozen importlib._bootstrap>", line 1003, in load_module File "<frozen importlib._bootstrap>", line 560, in module_for_loader_wrapper File "<frozen importlib._bootstrap>", line 868, in _load_module File "<frozen importlib._bootstrap>", line 313, in _call_with_frames_removed File "/var/lib/jenkins/jobs/chirp-test/workspace/tests/unit/test_memedit_edits.py", line 1, in <module> import mox ImportError: No module named 'mox' ====================================================================== ERROR: Failure: ImportError (No module named 'mox') ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/local/lib/python3.3/dist-packages/nose/failure.py", line 39, in runTest raise self.exc_val.with_traceback(self.tb) File "/usr/local/lib/python3.3/dist-packages/nose/loader.py", line 420, in loadTestsFromName addr.filename, addr.module) File "/usr/local/lib/python3.3/dist-packages/nose/importer.py", line 47, in importFromPath return self.importFromDir(dir_path, fqname) File "/usr/local/lib/python3.3/dist-packages/nose/importer.py", line 94, in importFromDir mod = load_module(part_fqname, fh, filename, desc) File "/usr/lib/python3.3/imp.py", line 180, in load_module return load_source(name, filename, file) File "/usr/lib/python3.3/imp.py", line 119, in load_source _LoadSourceCompatibility(name, pathname, file).load_module(name) File "<frozen importlib._bootstrap>", line 584, in _check_name_wrapper File "<frozen importlib._bootstrap>", line 1022, in load_module File "<frozen importlib._bootstrap>", line 1003, in load_module File "<frozen importlib._bootstrap>", line 560, in module_for_loader_wrapper File "<frozen importlib._bootstrap>", line 868, in _load_module File "<frozen importlib._bootstrap>", line 313, in _call_with_frames_removed File "/var/lib/jenkins/jobs/chirp-test/workspace/tests/unit/test_platform.py", line 17, in <module> import mox ImportError: No module named 'mox' ====================================================================== ERROR: Failure: ImportError (No module named 'mox') ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/local/lib/python3.3/dist-packages/nose/failure.py", line 39, in runTest raise self.exc_val.with_traceback(self.tb) File "/usr/local/lib/python3.3/dist-packages/nose/loader.py", line 420, in loadTestsFromName addr.filename, addr.module) File "/usr/local/lib/python3.3/dist-packages/nose/importer.py", line 47, in importFromPath return self.importFromDir(dir_path, fqname) File "/usr/local/lib/python3.3/dist-packages/nose/importer.py", line 94, in importFromDir mod = load_module(part_fqname, fh, filename, desc) File "/usr/lib/python3.3/imp.py", line 180, in load_module return load_source(name, filename, file) File "/usr/lib/python3.3/imp.py", line 119, in load_source _LoadSourceCompatibility(name, pathname, file).load_module(name) File "<frozen importlib._bootstrap>", line 584, in _check_name_wrapper File "<frozen importlib._bootstrap>", line 1022, in load_module File "<frozen importlib._bootstrap>", line 1003, in load_module File "<frozen importlib._bootstrap>", line 560, in module_for_loader_wrapper File "<frozen importlib._bootstrap>", line 868, in _load_module File "<frozen importlib._bootstrap>", line 313, in _call_with_frames_removed File "/var/lib/jenkins/jobs/chirp-test/workspace/tests/unit/test_settings.py", line 16, in <module> from tests.unit import base File "/var/lib/jenkins/jobs/chirp-test/workspace/tests/unit/base.py", line 2, in <module> import mox ImportError: No module named 'mox' ====================================================================== ERROR: Failure: ImportError (No module named 'mox') ---------------------------------------------------------------------- Traceback (most recent call last): File "/usr/local/lib/python3.3/dist-packages/nose/failure.py", line 39, in runTest raise self.exc_val.with_traceback(self.tb) File "/usr/local/lib/python3.3/dist-packages/nose/loader.py", line 420, in loadTestsFromName addr.filename, addr.module) File "/usr/local/lib/python3.3/dist-packages/nose/importer.py", line 47, in importFromPath return self.importFromDir(dir_path, fqname) File "/usr/local/lib/python3.3/dist-packages/nose/importer.py", line 94, in importFromDir mod = load_module(part_fqname, fh, filename, desc) File "/usr/lib/python3.3/imp.py", line 180, in load_module return load_source(name, filename, file) File "/usr/lib/python3.3/imp.py", line 119, in load_source _LoadSourceCompatibility(name, pathname, file).load_module(name) File "<frozen importlib._bootstrap>", line 584, in _check_name_wrapper File "<frozen importlib._bootstrap>", line 1022, in load_module File "<frozen importlib._bootstrap>", line 1003, in load_module File "<frozen importlib._bootstrap>", line 560, in module_for_loader_wrapper File "<frozen importlib._bootstrap>", line 868, in _load_module File "<frozen importlib._bootstrap>", line 313, in _call_with_frames_removed File "/var/lib/jenkins/jobs/chirp-test/workspace/tests/unit/test_shiftdialog.py", line 2, in <module> import mox ImportError: No module named 'mox' ---------------------------------------------------------------------- Ran 8 tests in 0.019s FAILED (errors=8) Patch 'tip' is OK Checking for PEP8 regressions... real 0m12.005s user 0m9.754s sys 0m0.190s ================================================ Tests FAILED: unit tests Build step 'Execute shell' marked build as failure Email was triggered for: Failure Sending email for trigger: Failure

2 3

[chirp_devel] [PATCH] [Th9000] New model driver for TYT TH9000D radios - fixed base class #1035
by David Fannin 10 May '15

10 May '15

# HG changeset patch # User David Fannin <dfannin(a)sushisoft.com> # Date 1430596915 25200 # Sat May 02 13:01:55 2015 -0700 # Node ID 9e5169ff126fe5bc82ce076e487898c91fd2c7b8 # Parent 31a7494c324a347634c30cc3c9bded2ce83eeb21 [Th9000] New model driver for TYT TH9000D radios - fixed base class #1035 diff -r 31a7494c324a -r 9e5169ff126f chirp/drivers/th9000.py --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/chirp/drivers/th9000.py Sat May 02 13:01:55 2015 -0700 @@ -0,0 +1,838 @@ +# Copyright 2015 David Fannin KK6DF <kk6df(a)arrl.org> +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +import os +import struct +import time +import logging + +from chirp import bitwise +from chirp import chirp_common +from chirp import directory +from chirp import errors +from chirp import memmap +from chirp import util +from chirp.settings import RadioSettingGroup, RadioSetting, RadioSettings, \ + RadioSettingValueList, RadioSettingValueString, RadioSettingValueBoolean, \ + RadioSettingValueInteger, RadioSettingValueString, \ + RadioSettingValueFloat, InvalidValueError + +LOG = logging.getLogger(__name__) + +# +# Chirp Driver for TYT TH-9000D (models: 2M (144 Mhz), 1.25M (220 Mhz) and 70cm (440 Mhz) radios) +# +# Version 1.0 +# +# Note: Features not working: +# - DCS , Cross Signaling +# - Skip channels +# +# Global Parameters +# +MMAPSIZE = 16384 +TONES = [62.5] + list(chirp_common.TONES) +TMODES = ['','Tone','DTCS'] +DUPLEXES = ['','err','-','+'] # index 2 not used +MODES = ['WFM','FM','NFM'] # 25k, 20k,15k bw +TUNING_STEPS=[ 5.0, 6.25, 8.33, 10.0, 12.5, 15.0, 20.0, 25.0, 30.0, 50.0 ] # index 0-9 +POWER_LEVELS=[chirp_common.PowerLevel("High", watts=65), + chirp_common.PowerLevel("Mid", watts=25), + chirp_common.PowerLevel("Low", watts=10)] + +CROSS_MODES = chirp_common.CROSS_MODES + +APO_LIST = [ "Off","30 min","1 hr","2 hrs" ] +BGCOLOR_LIST = ["Blue","Orange","Purple"] +BGBRIGHT_LIST = ["%s" % x for x in range(1,32)] +SQUELCH_LIST = ["Off"] + ["Level %s" % x for x in range(1,20)] +TIMEOUT_LIST = ["Off"] + ["%s min" % x for x in range(1,30)] +TXPWR_LIST = ["60W","25W"] # maximum power for Hi setting +TBSTFREQ_LIST = ["1750Hz","2100Hz","1000Hz","1450Hz"] +BEEP_LIST = ["Off","On"] + +SETTING_LISTS = { + "auto_power_off": APO_LIST, + "bg_color" : BGCOLOR_LIST, + "bg_brightness" : BGBRIGHT_LIST, + "squelch" : SQUELCH_LIST, + "timeout_timer" : TIMEOUT_LIST, + "choose_tx_power": TXPWR_LIST, + "tbst_freq" : TBSTFREQ_LIST, + "voice_prompt" : BEEP_LIST +} + +MEM_FORMAT = """ +#seekto 0x0000; +struct { + u8 unknown0000[16]; + char idhdr[16]; + u8 unknown0001[16]; +} fidhdr; +""" +#Overall Memory Map: +# +# Memory Map (Range 0x0100-3FF0, step 0x10): +# +# Field Start End Size +# (hex) (hex) (hex) +# +# 1 Channel Set Flag 0100 011F 20 +# 2 Channel Skip Flag 0120 013F 20 +# 3 Blank/Unknown 0140 01EF B0 +# 4 Unknown 01F0 01FF 10 +# 5 TX/RX Range 0200 020F 10 +# 6 Bootup Passwd 0210 021F 10 +# 7 Options, Radio 0220 023F 20 +# 8 Unknown 0240 019F +# 8B Startup Label 03E0 03E7 07 +# 9 Channel Bank 2000 38FF 1900 +# Channel 000 2000 201F 20 +# Channel 001 2020 202F 20 +# ... +# Channel 199 38E0 38FF 20 +# 10 Blank/Unknown 3900 3FFF 6FF 14592 16383 1792 +# Total Map Size 16128 (2^8 = 16384) +# +# TH9000/220 memory map +# section: 1 and 2: Channel Set/Skip Flags +# +# Channel Set (starts 0x100) : Channel Set bit is value 0 if a memory location in the channel bank is active. +# Channel Skip (starts 0x120): Channel Skip bit is value 0 if a memory location in the channel bank is active. +# +# Both flag maps are a total 24 bytes in length, aligned on 32 byte records. +# bit = 0 channel set/no skip, 1 is channel not set/skip +# +# to index a channel: +# cbyte = channel / 8 ; +# cbit = channel % 8 ; +# setflag = csetflag[cbyte].c[cbit] ; +# skipflag = cskipflag[cbyte].c[cbit] ; +# +# channel range is 0-199, range is 32 bytes (last 7 unknown) +# +MEM_FORMAT = MEM_FORMAT + """ +#seekto 0x0100; +struct { + bit c[8]; +} csetflag[32]; + +struct { + u8 unknown0100[7]; +} ropt0100; + +#seekto 0x0120; +struct { + bit c[8]; +} cskipflag[32]; + +struct { + u8 unknown0120[7]; +} ropt0120; +""" +# TH9000 memory map +# section: 5 TX/RX Range +# used to set the TX/RX range of the radio (e.g. 222-228Mhz for 220 meter) +# possible to set range for tx/rx +# +MEM_FORMAT = MEM_FORMAT + """ +#seekto 0x0200; +struct { + bbcd txrangelow[4]; + bbcd txrangehi[4]; + bbcd rxrangelow[4]; + bbcd rxrangehi[4]; +} freqrange; +""" +# TH9000 memory map +# section: 6 bootup_passwd +# used to set bootup passwd (see boot_passwd checkbox option) +# +# options - bootup password +# +# bytes:bit type description +# --------------------------------------------------------------------------- +# 6 u8 bootup_passwd[6] bootup passwd, 6 chars, numberic chars 30-39 , see boot_passwd checkbox to set +# 10 u8 unknown; +# + +MEM_FORMAT = MEM_FORMAT + """ +#seekto 0x0210; +struct { + u8 bootup_passwd[6]; + u8 unknown2010[10]; +} ropt0210; +""" +# TH9000/220 memory map +# section: 7 Radio Options +# used to set a number of radio options +# +# bytes:bit type description +# --------------------------------------------------------------------------- +# 1 u8 display_mode display mode, range 0-2, 0=freq,1=channel,2=name (selecting name affects vfo_mr) +# 1 u8 vfo_mr; vfo_mr , 0=vfo, mr=1 +# 1 u8 unknown; +# 1 u8 squelch; squelch level, range 0-19, hex for menu +# 1 u8 unknown[2]; +# 1 u8 channel_lock; if display_mode[channel] selected, then lock=1,no lock =0 +# 1 u8 unknown; +# 1 u8 bg_brightness ; background brightness, range 0-21, hex, menu index +# 1 u8 unknown; +# 1 u8 bg_color ; bg color, menu index, blue 0 , orange 1, purple 2 +# 1 u8 tbst_freq ; tbst freq , menu 0 = 1750Hz, 1=2100 , 2=1000 , 3=1450hz +# 1 u8 timeout_timer; timeout timer, hex, value = minutes, 0= no timeout +# 1 u8 unknown; +# 1 u8 auto_power_off; auto power off, range 0-3, off,30min, 1hr, 2hr, hex menu index +# 1 u8 voice_prompt; voice prompt, value 0,1 , Beep ON = 1, Beep Off = 2 +# +# description of function setup options, starting at 0x0230 +# +# bytes:bit type description +# --------------------------------------------------------------------------- +# 1 u8 // 0 +# :4 unknown:6 +# :1 elim_sql_tail:1 eliminate squelsh tail when no ctcss checkbox (1=checked) +# :1 sql_key_function "squelch off" 1 , "squelch momentary off" 0 , menu index +# 2 u8 unknown[2] /1-2 +# 1 u8 // 3 +# :4 unknown:4 +# :1 inhibit_init_ops:1 //bit 5 +# :1 unknownD:1 +# :1 inhibit_setup_bg_chk:1 //bit 7 +# :1 unknown:1 +# 1 u8 tail_elim_type menu , (off=0,120=1,180=2), // 4 +# 1 u8 choose_tx_power menu , (60w=0,25w=1) // 5 +# 2 u8 unknown[2]; // 6-7 +# 1 u8 bootup_passwd_flag checkbox 1=on, 0=off // 8 +# 7 u8 unknown[7]; // 9-F +# +MEM_FORMAT = MEM_FORMAT + """ +#seekto 0x0220; +struct { + u8 display_mode; + u8 vfo_mr; + u8 unknown0220A; + u8 squelch; + u8 unknown0220B[2]; + u8 channel_lock; + u8 unknown0220C; + u8 bg_brightness; + u8 unknown0220D; + u8 bg_color; + u8 tbst_freq; + u8 timeout_timer; + u8 unknown0220E; + u8 auto_power_off; + u8 voice_prompt; + u8 unknown0230A:6, + elim_sql_tail:1, + sql_key_function:1; + u8 unknown0230B[2]; + u8 unknown0230C:4, + inhibit_init_ops:1, + unknown0230D:1, + inhibit_setup_bg_chk:1, + unknown0230E:1; + u8 tail_elim_type; + u8 choose_tx_power; + u8 unknown0230F[2]; + u8 bootup_passwd_flag; + u8 unknown0230G[7]; +} settings; +""" +# TH9000 memory map +# section: 8B Startup Label +# +# bytes:bit type description +# --------------------------------------------------------------------------- +# 7 char start_label[7] label displayed at startup (usually your call sign) +# +MEM_FORMAT = MEM_FORMAT + """ +#seekto 0x03E0; +struct { + char startname[7]; +} slabel; +""" +# TH9000/220 memory map +# section: 9 Channel Bank +# description of channel bank (200 channels , range 0-199) +# Each 32 Byte (0x20 hex) record: +# bytes:bit type description +# --------------------------------------------------------------------------- +# 4 bbcd freq[4] receive frequency in packed binary coded decimal +# 4 bbcd offset[4] transmit offset in packed binary coded decimal (note: plus/minus direction set by 'duplex' field) +# 1 u8 +# :4 unknown:4 +# :4 tuning_step:4 tuning step, menu index value from 0-9 +# 5,6.25,8.33,10,12.5,15,20,25,30,50 +# 1 u8 +# :4 unknown:4 not yet decoded, used for DCS coding? +# :2 channel_width:2 channel spacing, menu index value from 0-3 +# 25,20,12.5 +# :1 reverse:1 reverse flag, 0=off, 1=on (reverses tx and rx freqs) +# :1 txoff:1 transmitt off flag, 0=transmit , 1=do not transmit +# 1 u8 +# :1 talkaround:1 talkaround flag, 0=off, 1=on (bypasses repeater) +# :1 compander:1 compander flag, 0=off, 1=on (turns on/off voice compander option) +# :2 unknown:2 +# :2 power:2 tx power setting, value range 0-2, 0=hi,1=med,2=lo +# :2 duplex:2 duplex settings, 0=simplex,2= minus(-) offset, 3= plus (+) offset (see offset field) +# +# 1 u8 +# :4 unknown:4 +# :2 rxtmode:2 rx tone mode, value range 0-2, 0=none, 1=CTCSS, 2=DCS (ctcss tone in field rxtone) +# :2 txtmode:2 tx tone mode, value range 0-2, 0=none, 1=CTCSS, 3=DCS (ctcss tone in field txtone) +# 1 u8 +# :2 unknown:2 +# :6 txtone:6 tx ctcss tone, menu index +# 1 u8 +# :2 unknown:2 +# :6 rxtone:6 rx ctcss tone, menu index +# 1 u8 txcode ?, not used for ctcss +# 1 u8 rxcode ?, not used for ctcss +# 3 u8 unknown[3] +# 7 char name[7] 7 byte char string for channel name +# 1 u8 +# :6 unknown:6, +# :2 busychannellockout:2 busy channel lockout option , 0=off, 1=repeater, 2=busy (lock out tx if channel busy) +# 4 u8 unknownI[4]; +# 1 u8 +# :7 unknown:7 +# :1 scrambler:1 scrambler flag, 0=off, 1=on (turns on tyt scrambler option) +# +MEM_FORMAT = MEM_FORMAT + """ +#seekto 0x2000; +struct { + bbcd freq[4]; + bbcd offset[4]; + u8 unknown2000A:4, + tuning_step:4; + u8 unknown2000B:4, + channel_width:2, + reverse:1, + txoff:1; + u8 talkaround:1, + compander:1, + unknown2000C:2, + power:2, + duplex:2; + u8 unknown2000D:4, + rxtmode:2, + txtmode:2; + u8 unknown2000E:2, + txtone:6; + u8 unknown2000F:2, + rxtone:6; + u8 txcode; + u8 rxcode; + u8 unknown2000G[3]; + char name[7]; + u8 unknown2000H:6, + busychannellockout:2; + u8 unknown2000I[4]; + u8 unknown2000J:7, + scrambler:1; +} memory[200] ; +""" + +def _echo_write(radio, data): + try: + radio.pipe.write(data) + radio.pipe.read(len(data)) + except Exception, e: + LOG.error("Error writing to radio: %s" % e) + raise errors.RadioError("Unable to write to radio") + + +def _checksum(data): + cs = 0 + for byte in data: + cs += ord(byte) + return cs % 256 + +def _read(radio, length): + try: + data = radio.pipe.read(length) + except Exception, e: + LOG.error( "Error reading from radio: %s" % e) + raise errors.RadioError("Unable to read from radio") + + if len(data) != length: + LOG.error( "Short read from radio (%i, expected %i)" % (len(data), + length)) + LOG.debug(util.hexprint(data)) + raise errors.RadioError("Short read from radio") + return data + + + +def _ident(radio): + radio.pipe.setTimeout(1) + _echo_write(radio,"PROGRAM") + response = radio.pipe.read(3) + if response != "QX\06": + LOG.debug( "Response was :\n%s" % util.hexprint(response)) + raise errors.RadioError("Unsupported model") + _echo_write(radio, "\x02") + response = radio.pipe.read(16) + LOG.debug(util.hexprint(response)) + if response[1:8] != "TH-9000": + LOG.error( "Looking for:\n%s" % util.hexprint("TH-9000")) + LOG.error( "Response was:\n%s" % util.hexprint(response)) + raise errors.RadioError("Unsupported model") + +def _send(radio, cmd, addr, length, data=None): + frame = struct.pack(">cHb", cmd, addr, length) + if data: + frame += data + frame += chr(_checksum(frame[1:])) + frame += "\x06" + _echo_write(radio, frame) + LOG.debug("Sent:\n%s" % util.hexprint(frame)) + if data: + result = radio.pipe.read(1) + if result != "\x06": + LOG.debug( "Ack was: %s" % repr(result)) + raise errors.RadioError("Radio did not accept block at %04x" % addr) + return + result = _read(radio, length + 6) + LOG.debug("Got:\n%s" % util.hexprint(result)) + header = result[0:4] + data = result[4:-2] + ack = result[-1] + if ack != "\x06": + LOG.debug("Ack was: %s" % repr(ack)) + raise errors.RadioError("Radio NAK'd block at %04x" % addr) + _cmd, _addr, _length = struct.unpack(">cHb", header) + if _addr != addr or _length != _length: + LOG.debug( "Expected/Received:") + LOG.debug(" Length: %02x/%02x" % (length, _length)) + LOG.debug( " Addr: %04x/%04x" % (addr, _addr)) + raise errors.RadioError("Radio send unexpected block") + cs = _checksum(result[1:-2]) + if cs != ord(result[-2]): + LOG.debug( "Calculated: %02x" % cs) + LOG.debug( "Actual: %02x" % ord(result[-2])) + raise errors.RadioError("Block at 0x%04x failed checksum" % addr) + return data + + +def _finish(radio): + endframe = "\x45\x4E\x44" + _echo_write(radio, endframe) + result = radio.pipe.read(1) + if result != "\x06": + LOG.error( "Got:\n%s" % util.hexprint(result)) + raise errors.RadioError("Radio did not finish cleanly") + +def do_download(radio): + + _ident(radio) + + _memobj = None + data = "" + + for start,end in radio._ranges: + for addr in range(start,end,0x10): + block = _send(radio,'R',addr,0x10) + data += block + status = chirp_common.Status() + status.cur = len(data) + status.max = end + status.msg = "Downloading from radio" + radio.status_fn(status) + + _finish(radio) + + return memmap.MemoryMap(data) + +def do_upload(radio): + + _ident(radio) + + for start,end in radio._ranges: + for addr in range(start,end,0x10): + if addr < 0x0100: + continue + block = radio._mmap[addr:addr+0x10] + _send(radio,'W',addr,len(block),block) + status = chirp_common.Status() + status.cur = addr + status.max = end + status.msg = "Uploading to Radio" + radio.status_fn(status) + + _finish(radio) + + + +# +# The base class, extended for use with other models +# +class Th9000Radio(chirp_common.CloneModeRadio, + chirp_common.ExperimentalRadio): + """TYT TH-9000""" + VENDOR = "TYT" + MODEL = "TH9000 Base" + BAUD_RATE = 9600 + valid_freq = [(900000000, 999000000)] + + + _memsize = MMAPSIZE + _ranges = [(0x0000,0x4000)] + + @classmethod + def get_prompts(cls): + rp = chirp_common.RadioPrompts() + rp.experimental = ("The TYT TH-9000 driver is an beta version." + "Proceed with Caution and backup your data") + return rp + + def get_features(self): + rf = chirp_common.RadioFeatures() + rf.has_settings = True + rf.has_bank = False + rf.has_cross = True + rf.has_tuning_step = False + rf.has_rx_dtcs = True + rf.valid_skips = ["","S"] + rf.memory_bounds = (0, 199) + rf.valid_name_length = 7 + rf.valid_characters = chirp_common.CHARSET_UPPER_NUMERIC + "-" + rf.valid_modes = MODES + rf.valid_tmodes = chirp_common.TONE_MODES + rf.valid_cross_modes = CROSS_MODES + rf.valid_power_levels = POWER_LEVELS + rf.valid_dtcs_codes = chirp_common.ALL_DTCS_CODES + rf.valid_bands = self.valid_freq + return rf + + # Do a download of the radio from the serial port + def sync_in(self): + self._mmap = do_download(self) + self.process_mmap() + + # Do an upload of the radio to the serial port + def sync_out(self): + do_upload(self) + + def process_mmap(self): + self._memobj = bitwise.parse(MEM_FORMAT, self._mmap) + + + # Return a raw representation of the memory object, which + # is very helpful for development + def get_raw_memory(self, number): + return repr(self._memobj.memory[number]) + + # not working yet + def _get_dcs_index(self, _mem,which): + base = getattr(_mem, '%scode' % which) + extra = getattr(_mem, '%sdcsextra' % which) + return (int(extra) << 8) | int(base) + + def _set_dcs_index(self, _mem, which, index): + base = getattr(_mem, '%scode' % which) + extra = getattr(_mem, '%sdcsextra' % which) + base.set_value(index & 0xFF) + extra.set_value(index >> 8) + + + # Extract a high-level memory object from the low-level memory map + # This is called to populate a memory in the UI + def get_memory(self, number): + # Get a low-level memory object mapped to the image + _mem = self._memobj.memory[number] + + # get flag info + cbyte = number / 8 ; + cbit = 7 - (number % 8) ; + setflag = self._memobj.csetflag[cbyte].c[cbit]; + skipflag = self._memobj.cskipflag[cbyte].c[cbit]; + + mem = chirp_common.Memory() + + mem.number = number # Set the memory number + + if setflag == 1: + mem.empty = True + return mem + + mem.freq = int(_mem.freq) * 100 + mem.offset = int(_mem.offset) * 100 + mem.name = str(_mem.name).rstrip() # Set the alpha tag + mem.duplex = DUPLEXES[_mem.duplex] + mem.mode = MODES[_mem.channel_width] + mem.power = POWER_LEVELS[_mem.power] + + rxtone = txtone = None + + + rxmode = TMODES[_mem.rxtmode] + txmode = TMODES[_mem.txtmode] + + + rxpol = txpol = "" + + # doesn't work + if rxmode == "Tone": + rxpol = "" + rxtone = TONES[_mem.rxtone] + elif rxmode == "DTCS": + rxpol = "N" + rxtone = chirp_common.ALL_DTCS_CODES[self._get_dcs_index(_mem,'rx')] + + if txmode == "Tone": + txpol = "" + txtone = TONES[_mem.txtone] + elif txmode == "DTCS": + txpol = "N" + txtone = chirp_common.ALL_DTCS_CODES[self._get_dcs_index(_mem,'tx')] + + + chirp_common.split_tone_decode(mem, + (txmode, txtone, txpol), + (rxmode, rxtone, rxpol)) + + mem.skip = "S" if skipflag == 1 else "" + + + # We'll consider any blank (i.e. 0MHz frequency) to be empty + if mem.freq == 0: + mem.empty = True + + return mem + + # Store details about a high-level memory to the memory map + # This is called when a user edits a memory in the UI + def set_memory(self, mem): + # Get a low-level memory object mapped to the image + + _mem = self._memobj.memory[mem.number] + + cbyte = mem.number / 8 + cbit = 7 - (mem.number % 8) + + if mem.empty: + self._memobj.csetflag[cbyte].c[cbit] = 1 + self._memobj.cskipflag[cbyte].c[cbit] = 1 + return + + self._memobj.csetflag[cbyte].c[cbit] = 0 + self._memobj.cskipflag[cbyte].c[cbit] = 1 if (mem.skip == "S") else 0 + + _mem.set_raw("\x00" * 32) + + _mem.freq = mem.freq / 100 # Convert to low-level frequency + _mem.offset = mem.offset / 100 # Convert to low-level frequency + + _mem.name = mem.name.ljust(7)[:7] # Store the alpha tag + _mem.duplex = DUPLEXES.index(mem.duplex) + + + try: + _mem.channel_width = MODES.index(mem.mode) + except ValueError: + _mem.channel_width = 0 + + ((txmode, txtone, txpol), + (rxmode, rxtone, rxpol)) = chirp_common.split_tone_encode(mem) + + _mem.txtmode = TMODES.index(txmode) + _mem.rxtmode = TMODES.index(rxmode) + + if txmode == "Tone": + _mem.txtone = TONES.index(txtone) + elif txmode == "DTCS": + self._set_dcs_index(_mem,'tx',chirp_common.ALL_DTCS_CODES.index(txtone)) + + if rxmode == "Tone": + _mem.rxtone = TONES.index(rxtone) + elif rxmode == "DTCS": + self._set_dcs_index(_mem, 'rx', chirp_common.ALL_DTCS_CODES.index(rxtone)) + + #_mem.txinv = txpol == "N" + #_mem.rxinv = rxpol == "N" + + + if mem.power: + _mem.power = POWER_LEVELS.index(mem.power) + else: + _mem.power = 0 + + def _get_settings(self): + _settings = self._memobj.settings + _freqrange = self._memobj.freqrange + _slabel = self._memobj.slabel + + basic = RadioSettingGroup("basic","Global Settings") + freqrange = RadioSettingGroup("freqrange","Frequency Ranges") + top = RadioSettingGroup("top","All Settings",basic,freqrange) + settings = RadioSettings(top) + + def _filter(name): + filtered = "" + for char in str(name): + if char in chirp_common.CHARSET_ASCII: + filtered += char + else: + filtered += "" + return filtered + + val = RadioSettingValueString(0,7,_filter(_slabel.startname)) + rs = RadioSetting("startname","Startup Label",val) + basic.append(rs) + + rs = RadioSetting("bg_color","LCD Color", + RadioSettingValueList(BGCOLOR_LIST, BGCOLOR_LIST[_settings.bg_color])) + basic.append(rs) + + rs = RadioSetting("bg_brightness","LCD Brightness", + RadioSettingValueList(BGBRIGHT_LIST, BGBRIGHT_LIST[_settings.bg_brightness])) + basic.append(rs) + + rs = RadioSetting("squelch","Squelch Level", + RadioSettingValueList(SQUELCH_LIST, SQUELCH_LIST[_settings.squelch])) + basic.append(rs) + + rs = RadioSetting("timeout_timer","Timeout Timer (TOT)", + RadioSettingValueList(TIMEOUT_LIST, TIMEOUT_LIST[_settings.timeout_timer])) + basic.append(rs) + + rs = RadioSetting("auto_power_off","Auto Power Off (APO)", + RadioSettingValueList(APO_LIST, APO_LIST[_settings.auto_power_off])) + basic.append(rs) + + rs = RadioSetting("voice_prompt","Beep Prompt", + RadioSettingValueList(BEEP_LIST, BEEP_LIST[_settings.voice_prompt])) + basic.append(rs) + + rs = RadioSetting("tbst_freq","Tone Burst Frequency", + RadioSettingValueList(TBSTFREQ_LIST, TBSTFREQ_LIST[_settings.tbst_freq])) + basic.append(rs) + + rs = RadioSetting("choose_tx_power","Max Level of TX Power", + RadioSettingValueList(TXPWR_LIST, TXPWR_LIST[_settings.choose_tx_power])) + basic.append(rs) + + (flow,fhigh) = self.valid_freq[0] + flow /= 1000 + fhigh /= 1000 + fmidrange = (fhigh- flow)/2 + + rs = RadioSetting("txrangelow","TX Freq, Lower Limit (khz)", RadioSettingValueInteger(flow, + flow + fmidrange, + int(_freqrange.txrangelow)/10)) + freqrange.append(rs) + + rs = RadioSetting("txrangehi","TX Freq, Upper Limit (khz)", RadioSettingValueInteger(fhigh-fmidrange, + fhigh, + int(_freqrange.txrangehi)/10)) + freqrange.append(rs) + + rs = RadioSetting("rxrangelow","RX Freq, Lower Limit (khz)", RadioSettingValueInteger(flow, + flow+fmidrange, + int(_freqrange.rxrangelow)/10)) + freqrange.append(rs) + + rs = RadioSetting("rxrangehi","RX Freq, Upper Limit (khz)", RadioSettingValueInteger(fhigh-fmidrange, + fhigh, + int(_freqrange.rxrangehi)/10)) + freqrange.append(rs) + + return settings + + def get_settings(self): + try: + return self._get_settings() + except: + import traceback + LOG.error( "failed to parse settings") + traceback.print_exc() + return None + + def set_settings(self,settings): + _settings = self._memobj.settings + for element in settings: + if not isinstance(element,RadioSetting): + self.set_settings(element) + continue + else: + try: + name = element.get_name() + + if name in ["txrangelow","txrangehi","rxrangelow","rxrangehi"]: + LOG.debug( "setting %s = %s" % (name,int(element.value)*10)) + setattr(self._memobj.freqrange,name,int(element.value)*10) + continue + + if name in ["startname"]: + LOG.debug( "setting %s = %s" % (name, element.value)) + setattr(self._memobj.slabel,name,element.value) + continue + + obj = _settings + setting = element.get_name() + + if element.has_apply_callback(): + LOG.debug( "using apply callback") + element.run_apply_callback() + else: + LOG.debug( "Setting %s = %s" % (setting, element.value)) + setattr(obj, setting, element.value) + except Exception, e: + LOG.debug( element.get_name()) + raise + + @classmethod + def match_model(cls, filedata, filename): + if MMAPSIZE == len(filedata): + (flow,fhigh) = cls.valid_freq[0] + flow /= 1000000 + fhigh /= 1000000 + + txmin=ord(filedata[0x200])*100 + (ord(filedata[0x201])>>4)*10 + ord(filedata[0x201])%16 + txmax=ord(filedata[0x204])*100 + (ord(filedata[0x205])>>4)*10 + ord(filedata[0x205])%16 + rxmin=ord(filedata[0x208])*100 + (ord(filedata[0x209])>>4)*10 + ord(filedata[0x209])%16 + rxmax=ord(filedata[0x20C])*100 + (ord(filedata[0x20D])>>4)*10 + ord(filedata[0x20D])%16 + + if ( rxmin >= flow and rxmax <= fhigh and txmin >= flow and txmax <= fhigh ): + return True + + return False + +(a)directory.register +class Th9000220Radio(Th9000Radio): + """TYT TH-9000 220""" + VENDOR = "TYT" + MODEL = "TH9000_220" + BAUD_RATE = 9600 + valid_freq = [(220000000, 260000000)] + +(a)directory.register +class Th9000144Radio(Th9000220Radio): + """TYT TH-9000 144""" + VENDOR = "TYT" + MODEL = "TH9000_144" + BAUD_RATE = 9600 + valid_freq = [(136000000, 174000000)] + +(a)directory.register +class Th9000440Radio(Th9000220Radio): + """TYT TH-9000 440""" + VENDOR = "TYT" + MODEL = "TH9000_440" + BAUD_RATE = 9600 + valid_freq = [(400000000, 490000000)]

2 4

[chirp_devel] [PATCH] [Th9000] New model driver for TYT TH9000D radios - fixed base class #1035
by David Fannin 10 May '15

10 May '15

# HG changeset patch # User David Fannin <dfannin(a)sushisoft.com> # Date 1431306681 25200 # Sun May 10 18:11:21 2015 -0700 # Node ID c86c64545ab6238d3110c76576cfd0808368f212 # Parent 31a7494c324a347634c30cc3c9bded2ce83eeb21 [Th9000] New model driver for TYT TH9000D radios - fixed base class #1035 diff -r 31a7494c324a -r c86c64545ab6 chirp/drivers/th9000.py --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/chirp/drivers/th9000.py Sun May 10 18:11:21 2015 -0700 @@ -0,0 +1,838 @@ +# Copyright 2015 David Fannin KK6DF <kk6df(a)arrl.org> +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +import os +import struct +import time +import logging + +from chirp import bitwise +from chirp import chirp_common +from chirp import directory +from chirp import errors +from chirp import memmap +from chirp import util +from chirp.settings import RadioSettingGroup, RadioSetting, RadioSettings, \ + RadioSettingValueList, RadioSettingValueString, RadioSettingValueBoolean, \ + RadioSettingValueInteger, RadioSettingValueString, \ + RadioSettingValueFloat, InvalidValueError + +LOG = logging.getLogger(__name__) + +# +# Chirp Driver for TYT TH-9000D (models: 2M (144 Mhz), 1.25M (220 Mhz) and 70cm (440 Mhz) radios) +# +# Version 1.0 +# +# - Skip channels +# +# Global Parameters +# +MMAPSIZE = 16384 +TONES = [62.5] + list(chirp_common.TONES) +TMODES = ['','Tone','DTCS',''] +DUPLEXES = ['','err','-','+'] # index 2 not used +MODES = ['WFM','FM','NFM'] # 25k, 20k,15k bw +TUNING_STEPS=[ 5.0, 6.25, 8.33, 10.0, 12.5, 15.0, 20.0, 25.0, 30.0, 50.0 ] # index 0-9 +POWER_LEVELS=[chirp_common.PowerLevel("High", watts=65), + chirp_common.PowerLevel("Mid", watts=25), + chirp_common.PowerLevel("Low", watts=10)] + +CROSS_MODES = chirp_common.CROSS_MODES + +APO_LIST = [ "Off","30 min","1 hr","2 hrs" ] +BGCOLOR_LIST = ["Blue","Orange","Purple"] +BGBRIGHT_LIST = ["%s" % x for x in range(1,32)] +SQUELCH_LIST = ["Off"] + ["Level %s" % x for x in range(1,20)] +TIMEOUT_LIST = ["Off"] + ["%s min" % x for x in range(1,30)] +TXPWR_LIST = ["60W","25W"] # maximum power for Hi setting +TBSTFREQ_LIST = ["1750Hz","2100Hz","1000Hz","1450Hz"] +BEEP_LIST = ["Off","On"] + +SETTING_LISTS = { + "auto_power_off": APO_LIST, + "bg_color" : BGCOLOR_LIST, + "bg_brightness" : BGBRIGHT_LIST, + "squelch" : SQUELCH_LIST, + "timeout_timer" : TIMEOUT_LIST, + "choose_tx_power": TXPWR_LIST, + "tbst_freq" : TBSTFREQ_LIST, + "voice_prompt" : BEEP_LIST +} + +MEM_FORMAT = """ +#seekto 0x0000; +struct { + u8 unknown0000[16]; + char idhdr[16]; + u8 unknown0001[16]; +} fidhdr; +""" +#Overall Memory Map: +# +# Memory Map (Range 0x0100-3FF0, step 0x10): +# +# Field Start End Size +# (hex) (hex) (hex) +# +# 1 Channel Set Flag 0100 011F 20 +# 2 Channel Skip Flag 0120 013F 20 +# 3 Blank/Unknown 0140 01EF B0 +# 4 Unknown 01F0 01FF 10 +# 5 TX/RX Range 0200 020F 10 +# 6 Bootup Passwd 0210 021F 10 +# 7 Options, Radio 0220 023F 20 +# 8 Unknown 0240 019F +# 8B Startup Label 03E0 03E7 07 +# 9 Channel Bank 2000 38FF 1900 +# Channel 000 2000 201F 20 +# Channel 001 2020 202F 20 +# ... +# Channel 199 38E0 38FF 20 +# 10 Blank/Unknown 3900 3FFF 6FF 14592 16383 1792 +# Total Map Size 16128 (2^8 = 16384) +# +# TH9000/220 memory map +# section: 1 and 2: Channel Set/Skip Flags +# +# Channel Set (starts 0x100) : Channel Set bit is value 0 if a memory location in the channel bank is active. +# Channel Skip (starts 0x120): Channel Skip bit is value 0 if a memory location in the channel bank is active. +# +# Both flag maps are a total 24 bytes in length, aligned on 32 byte records. +# bit = 0 channel set/no skip, 1 is channel not set/skip +# +# to index a channel: +# cbyte = channel / 8 ; +# cbit = channel % 8 ; +# setflag = csetflag[cbyte].c[cbit] ; +# skipflag = cskipflag[cbyte].c[cbit] ; +# +# channel range is 0-199, range is 32 bytes (last 7 unknown) +# +MEM_FORMAT = MEM_FORMAT + """ +#seekto 0x0100; +struct { + bit c[8]; +} csetflag[32]; + +struct { + u8 unknown0100[7]; +} ropt0100; + +#seekto 0x0120; +struct { + bit c[8]; +} cskipflag[32]; + +struct { + u8 unknown0120[7]; +} ropt0120; +""" +# TH9000 memory map +# section: 5 TX/RX Range +# used to set the TX/RX range of the radio (e.g. 222-228Mhz for 220 meter) +# possible to set range for tx/rx +# +MEM_FORMAT = MEM_FORMAT + """ +#seekto 0x0200; +struct { + bbcd txrangelow[4]; + bbcd txrangehi[4]; + bbcd rxrangelow[4]; + bbcd rxrangehi[4]; +} freqrange; +""" +# TH9000 memory map +# section: 6 bootup_passwd +# used to set bootup passwd (see boot_passwd checkbox option) +# +# options - bootup password +# +# bytes:bit type description +# --------------------------------------------------------------------------- +# 6 u8 bootup_passwd[6] bootup passwd, 6 chars, numberic chars 30-39 , see boot_passwd checkbox to set +# 10 u8 unknown; +# + +MEM_FORMAT = MEM_FORMAT + """ +#seekto 0x0210; +struct { + u8 bootup_passwd[6]; + u8 unknown2010[10]; +} ropt0210; +""" +# TH9000/220 memory map +# section: 7 Radio Options +# used to set a number of radio options +# +# bytes:bit type description +# --------------------------------------------------------------------------- +# 1 u8 display_mode display mode, range 0-2, 0=freq,1=channel,2=name (selecting name affects vfo_mr) +# 1 u8 vfo_mr; vfo_mr , 0=vfo, mr=1 +# 1 u8 unknown; +# 1 u8 squelch; squelch level, range 0-19, hex for menu +# 1 u8 unknown[2]; +# 1 u8 channel_lock; if display_mode[channel] selected, then lock=1,no lock =0 +# 1 u8 unknown; +# 1 u8 bg_brightness ; background brightness, range 0-21, hex, menu index +# 1 u8 unknown; +# 1 u8 bg_color ; bg color, menu index, blue 0 , orange 1, purple 2 +# 1 u8 tbst_freq ; tbst freq , menu 0 = 1750Hz, 1=2100 , 2=1000 , 3=1450hz +# 1 u8 timeout_timer; timeout timer, hex, value = minutes, 0= no timeout +# 1 u8 unknown; +# 1 u8 auto_power_off; auto power off, range 0-3, off,30min, 1hr, 2hr, hex menu index +# 1 u8 voice_prompt; voice prompt, value 0,1 , Beep ON = 1, Beep Off = 2 +# +# description of function setup options, starting at 0x0230 +# +# bytes:bit type description +# --------------------------------------------------------------------------- +# 1 u8 // 0 +# :4 unknown:6 +# :1 elim_sql_tail:1 eliminate squelsh tail when no ctcss checkbox (1=checked) +# :1 sql_key_function "squelch off" 1 , "squelch momentary off" 0 , menu index +# 2 u8 unknown[2] /1-2 +# 1 u8 // 3 +# :4 unknown:4 +# :1 inhibit_init_ops:1 //bit 5 +# :1 unknownD:1 +# :1 inhibit_setup_bg_chk:1 //bit 7 +# :1 unknown:1 +# 1 u8 tail_elim_type menu , (off=0,120=1,180=2), // 4 +# 1 u8 choose_tx_power menu , (60w=0,25w=1) // 5 +# 2 u8 unknown[2]; // 6-7 +# 1 u8 bootup_passwd_flag checkbox 1=on, 0=off // 8 +# 7 u8 unknown[7]; // 9-F +# +MEM_FORMAT = MEM_FORMAT + """ +#seekto 0x0220; +struct { + u8 display_mode; + u8 vfo_mr; + u8 unknown0220A; + u8 squelch; + u8 unknown0220B[2]; + u8 channel_lock; + u8 unknown0220C; + u8 bg_brightness; + u8 unknown0220D; + u8 bg_color; + u8 tbst_freq; + u8 timeout_timer; + u8 unknown0220E; + u8 auto_power_off; + u8 voice_prompt; + u8 unknown0230A:6, + elim_sql_tail:1, + sql_key_function:1; + u8 unknown0230B[2]; + u8 unknown0230C:4, + inhibit_init_ops:1, + unknown0230D:1, + inhibit_setup_bg_chk:1, + unknown0230E:1; + u8 tail_elim_type; + u8 choose_tx_power; + u8 unknown0230F[2]; + u8 bootup_passwd_flag; + u8 unknown0230G[7]; +} settings; +""" +# TH9000 memory map +# section: 8B Startup Label +# +# bytes:bit type description +# --------------------------------------------------------------------------- +# 7 char start_label[7] label displayed at startup (usually your call sign) +# +MEM_FORMAT = MEM_FORMAT + """ +#seekto 0x03E0; +struct { + char startname[7]; +} slabel; +""" +# TH9000/220 memory map +# section: 9 Channel Bank +# description of channel bank (200 channels , range 0-199) +# Each 32 Byte (0x20 hex) record: +# bytes:bit type description +# --------------------------------------------------------------------------- +# 4 bbcd freq[4] receive frequency in packed binary coded decimal +# 4 bbcd offset[4] transmit offset in packed binary coded decimal (note: plus/minus direction set by 'duplex' field) +# 1 u8 +# :4 unknown:4 +# :4 tuning_step:4 tuning step, menu index value from 0-9 +# 5,6.25,8.33,10,12.5,15,20,25,30,50 +# 1 u8 +# :4 unknown:4 not yet decoded, used for DCS coding? +# :2 channel_width:2 channel spacing, menu index value from 0-3 +# 25,20,12.5 +# :1 reverse:1 reverse flag, 0=off, 1=on (reverses tx and rx freqs) +# :1 txoff:1 transmitt off flag, 0=transmit , 1=do not transmit +# 1 u8 +# :1 talkaround:1 talkaround flag, 0=off, 1=on (bypasses repeater) +# :1 compander:1 compander flag, 0=off, 1=on (turns on/off voice compander option) +# :2 unknown:2 +# :2 power:2 tx power setting, value range 0-2, 0=hi,1=med,2=lo +# :2 duplex:2 duplex settings, 0=simplex,2= minus(-) offset, 3= plus (+) offset (see offset field) +# +# 1 u8 +# :4 unknown:4 +# :2 rxtmode:2 rx tone mode, value range 0-2, 0=none, 1=CTCSS, 2=DCS (ctcss tone in field rxtone) +# :2 txtmode:2 tx tone mode, value range 0-2, 0=none, 1=CTCSS, 3=DCS (ctcss tone in field txtone) +# 1 u8 +# :2 unknown:2 +# :6 txtone:6 tx ctcss tone, menu index +# 1 u8 +# :2 unknown:2 +# :6 rxtone:6 rx ctcss tone, menu index +# 1 u8 txcode ?, not used for ctcss +# 1 u8 rxcode ?, not used for ctcss +# 3 u8 unknown[3] +# 7 char name[7] 7 byte char string for channel name +# 1 u8 +# :6 unknown:6, +# :2 busychannellockout:2 busy channel lockout option , 0=off, 1=repeater, 2=busy (lock out tx if channel busy) +# 4 u8 unknownI[4]; +# 1 u8 +# :7 unknown:7 +# :1 scrambler:1 scrambler flag, 0=off, 1=on (turns on tyt scrambler option) +# +MEM_FORMAT = MEM_FORMAT + """ +#seekto 0x2000; +struct { + bbcd freq[4]; + bbcd offset[4]; + u8 unknown2000A:4, + tuning_step:4; + u8 rxdcsextra:1, + txdcsextra:1, + rxinv:1, + txinv:1, + channel_width:2, + reverse:1, + txoff:1; + u8 talkaround:1, + compander:1, + unknown2000C:2, + power:2, + duplex:2; + u8 unknown2000D:4, + rxtmode:2, + txtmode:2; + u8 unknown2000E:2, + txtone:6; + u8 unknown2000F:2, + rxtone:6; + u8 txcode; + u8 rxcode; + u8 unknown2000G[3]; + char name[7]; + u8 unknown2000H:6, + busychannellockout:2; + u8 unknown2000I[4]; + u8 unknown2000J:7, + scrambler:1; +} memory[200] ; +""" + +def _echo_write(radio, data): + try: + radio.pipe.write(data) + radio.pipe.read(len(data)) + except Exception, e: + LOG.error("Error writing to radio: %s" % e) + raise errors.RadioError("Unable to write to radio") + + +def _checksum(data): + cs = 0 + for byte in data: + cs += ord(byte) + return cs % 256 + +def _read(radio, length): + try: + data = radio.pipe.read(length) + except Exception, e: + LOG.error( "Error reading from radio: %s" % e) + raise errors.RadioError("Unable to read from radio") + + if len(data) != length: + LOG.error( "Short read from radio (%i, expected %i)" % (len(data), + length)) + LOG.debug(util.hexprint(data)) + raise errors.RadioError("Short read from radio") + return data + + + +def _ident(radio): + radio.pipe.setTimeout(1) + _echo_write(radio,"PROGRAM") + response = radio.pipe.read(3) + if response != "QX\06": + LOG.debug( "Response was :\n%s" % util.hexprint(response)) + raise errors.RadioError("Unsupported model") + _echo_write(radio, "\x02") + response = radio.pipe.read(16) + LOG.debug(util.hexprint(response)) + if response[1:8] != "TH-9000": + LOG.error( "Looking for:\n%s" % util.hexprint("TH-9000")) + LOG.error( "Response was:\n%s" % util.hexprint(response)) + raise errors.RadioError("Unsupported model") + +def _send(radio, cmd, addr, length, data=None): + frame = struct.pack(">cHb", cmd, addr, length) + if data: + frame += data + frame += chr(_checksum(frame[1:])) + frame += "\x06" + _echo_write(radio, frame) + LOG.debug("Sent:\n%s" % util.hexprint(frame)) + if data: + result = radio.pipe.read(1) + if result != "\x06": + LOG.debug( "Ack was: %s" % repr(result)) + raise errors.RadioError("Radio did not accept block at %04x" % addr) + return + result = _read(radio, length + 6) + LOG.debug("Got:\n%s" % util.hexprint(result)) + header = result[0:4] + data = result[4:-2] + ack = result[-1] + if ack != "\x06": + LOG.debug("Ack was: %s" % repr(ack)) + raise errors.RadioError("Radio NAK'd block at %04x" % addr) + _cmd, _addr, _length = struct.unpack(">cHb", header) + if _addr != addr or _length != _length: + LOG.debug( "Expected/Received:") + LOG.debug(" Length: %02x/%02x" % (length, _length)) + LOG.debug( " Addr: %04x/%04x" % (addr, _addr)) + raise errors.RadioError("Radio send unexpected block") + cs = _checksum(result[1:-2]) + if cs != ord(result[-2]): + LOG.debug( "Calculated: %02x" % cs) + LOG.debug( "Actual: %02x" % ord(result[-2])) + raise errors.RadioError("Block at 0x%04x failed checksum" % addr) + return data + + +def _finish(radio): + endframe = "\x45\x4E\x44" + _echo_write(radio, endframe) + result = radio.pipe.read(1) + if result != "\x06": + LOG.error( "Got:\n%s" % util.hexprint(result)) + raise errors.RadioError("Radio did not finish cleanly") + +def do_download(radio): + + _ident(radio) + + _memobj = None + data = "" + + for start,end in radio._ranges: + for addr in range(start,end,0x10): + block = _send(radio,'R',addr,0x10) + data += block + status = chirp_common.Status() + status.cur = len(data) + status.max = end + status.msg = "Downloading from radio" + radio.status_fn(status) + + _finish(radio) + + return memmap.MemoryMap(data) + +def do_upload(radio): + + _ident(radio) + + for start,end in radio._ranges: + for addr in range(start,end,0x10): + if addr < 0x0100: + continue + block = radio._mmap[addr:addr+0x10] + _send(radio,'W',addr,len(block),block) + status = chirp_common.Status() + status.cur = addr + status.max = end + status.msg = "Uploading to Radio" + radio.status_fn(status) + + _finish(radio) + + + +# +# The base class, extended for use with other models +# +class Th9000Radio(chirp_common.CloneModeRadio, + chirp_common.ExperimentalRadio): + """TYT TH-9000""" + VENDOR = "TYT" + MODEL = "TH9000 Base" + BAUD_RATE = 9600 + valid_freq = [(900000000, 999000000)] + + + _memsize = MMAPSIZE + _ranges = [(0x0000,0x4000)] + + @classmethod + def get_prompts(cls): + rp = chirp_common.RadioPrompts() + rp.experimental = ("The TYT TH-9000 driver is an beta version." + "Proceed with Caution and backup your data") + return rp + + def get_features(self): + rf = chirp_common.RadioFeatures() + rf.has_settings = True + rf.has_bank = False + rf.has_cross = True + rf.has_tuning_step = False + rf.has_rx_dtcs = True + rf.valid_skips = ["","S"] + rf.memory_bounds = (0, 199) + rf.valid_name_length = 7 + rf.valid_characters = chirp_common.CHARSET_UPPER_NUMERIC + "-" + rf.valid_modes = MODES + rf.valid_tmodes = ['','Tone','TSQL','DTCS','Cross'] + rf.valid_cross_modes = ['Tone->DTCS','DTCS->Tone', + '->Tone','->DTCS','Tone->Tone'] + rf.valid_power_levels = POWER_LEVELS + rf.valid_dtcs_codes = chirp_common.ALL_DTCS_CODES + rf.valid_bands = self.valid_freq + return rf + + # Do a download of the radio from the serial port + def sync_in(self): + self._mmap = do_download(self) + self.process_mmap() + + # Do an upload of the radio to the serial port + def sync_out(self): + do_upload(self) + + def process_mmap(self): + self._memobj = bitwise.parse(MEM_FORMAT, self._mmap) + + + # Return a raw representation of the memory object, which + # is very helpful for development + def get_raw_memory(self, number): + return repr(self._memobj.memory[number]) + + # not working yet + def _get_dcs_index(self, _mem,which): + base = getattr(_mem, '%scode' % which) + extra = getattr(_mem, '%sdcsextra' % which) + return (int(extra) << 8) | int(base) + + def _set_dcs_index(self, _mem, which, index): + base = getattr(_mem, '%scode' % which) + extra = getattr(_mem, '%sdcsextra' % which) + base.set_value(index & 0xFF) + extra.set_value(index >> 8) + + + # Extract a high-level memory object from the low-level memory map + # This is called to populate a memory in the UI + def get_memory(self, number): + # Get a low-level memory object mapped to the image + _mem = self._memobj.memory[number] + + # get flag info + cbyte = number / 8 ; + cbit = 7 - (number % 8) ; + setflag = self._memobj.csetflag[cbyte].c[cbit]; + skipflag = self._memobj.cskipflag[cbyte].c[cbit]; + + mem = chirp_common.Memory() + + mem.number = number # Set the memory number + + if setflag == 1: + mem.empty = True + return mem + + mem.freq = int(_mem.freq) * 100 + mem.offset = int(_mem.offset) * 100 + mem.name = str(_mem.name).rstrip() # Set the alpha tag + mem.duplex = DUPLEXES[_mem.duplex] + mem.mode = MODES[_mem.channel_width] + mem.power = POWER_LEVELS[_mem.power] + + rxtone = txtone = None + + + rxmode = TMODES[_mem.rxtmode] + txmode = TMODES[_mem.txtmode] + + + + # doesn't work + if rxmode == "Tone": + rxtone = TONES[_mem.rxtone] + elif rxmode == "DTCS": + rxtone = chirp_common.ALL_DTCS_CODES[self._get_dcs_index(_mem,'rx')] + + if txmode == "Tone": + txtone = TONES[_mem.txtone] + elif txmode == "DTCS": + txtone = chirp_common.ALL_DTCS_CODES[self._get_dcs_index(_mem,'tx')] + + rxpol = _mem.rxinv and "R" or "N" + txpol = _mem.txinv and "R" or "N" + + chirp_common.split_tone_decode(mem, + (txmode, txtone, txpol), + (rxmode, rxtone, rxpol)) + + mem.skip = "S" if skipflag == 1 else "" + + + # We'll consider any blank (i.e. 0MHz frequency) to be empty + if mem.freq == 0: + mem.empty = True + + return mem + + # Store details about a high-level memory to the memory map + # This is called when a user edits a memory in the UI + def set_memory(self, mem): + # Get a low-level memory object mapped to the image + + _mem = self._memobj.memory[mem.number] + + cbyte = mem.number / 8 + cbit = 7 - (mem.number % 8) + + if mem.empty: + self._memobj.csetflag[cbyte].c[cbit] = 1 + self._memobj.cskipflag[cbyte].c[cbit] = 1 + return + + self._memobj.csetflag[cbyte].c[cbit] = 0 + self._memobj.cskipflag[cbyte].c[cbit] = 1 if (mem.skip == "S") else 0 + + _mem.set_raw("\x00" * 32) + + _mem.freq = mem.freq / 100 # Convert to low-level frequency + _mem.offset = mem.offset / 100 # Convert to low-level frequency + + _mem.name = mem.name.ljust(7)[:7] # Store the alpha tag + _mem.duplex = DUPLEXES.index(mem.duplex) + + + try: + _mem.channel_width = MODES.index(mem.mode) + except ValueError: + _mem.channel_width = 0 + + ((txmode, txtone, txpol), + (rxmode, rxtone, rxpol)) = chirp_common.split_tone_encode(mem) + + _mem.txtmode = TMODES.index(txmode) + + _mem.rxtmode = TMODES.index(rxmode) + + if txmode == "Tone": + _mem.txtone = TONES.index(txtone) + elif txmode == "DTCS": + self._set_dcs_index(_mem,'tx',chirp_common.ALL_DTCS_CODES.index(txtone)) + + if rxmode == "Tone": + _mem.rxtone = TONES.index(rxtone) + elif rxmode == "DTCS": + self._set_dcs_index(_mem, 'rx', chirp_common.ALL_DTCS_CODES.index(rxtone)) + + _mem.txinv = txpol == "R" + _mem.rxinv = rxpol == "R" + + + if mem.power: + _mem.power = POWER_LEVELS.index(mem.power) + else: + _mem.power = 0 + + def _get_settings(self): + _settings = self._memobj.settings + _freqrange = self._memobj.freqrange + _slabel = self._memobj.slabel + + basic = RadioSettingGroup("basic","Global Settings") + freqrange = RadioSettingGroup("freqrange","Frequency Ranges") + top = RadioSettingGroup("top","All Settings",basic,freqrange) + settings = RadioSettings(top) + + def _filter(name): + filtered = "" + for char in str(name): + if char in chirp_common.CHARSET_ASCII: + filtered += char + else: + filtered += "" + return filtered + + val = RadioSettingValueString(0,7,_filter(_slabel.startname)) + rs = RadioSetting("startname","Startup Label",val) + basic.append(rs) + + rs = RadioSetting("bg_color","LCD Color", + RadioSettingValueList(BGCOLOR_LIST, BGCOLOR_LIST[_settings.bg_color])) + basic.append(rs) + + rs = RadioSetting("bg_brightness","LCD Brightness", + RadioSettingValueList(BGBRIGHT_LIST, BGBRIGHT_LIST[_settings.bg_brightness])) + basic.append(rs) + + rs = RadioSetting("squelch","Squelch Level", + RadioSettingValueList(SQUELCH_LIST, SQUELCH_LIST[_settings.squelch])) + basic.append(rs) + + rs = RadioSetting("timeout_timer","Timeout Timer (TOT)", + RadioSettingValueList(TIMEOUT_LIST, TIMEOUT_LIST[_settings.timeout_timer])) + basic.append(rs) + + rs = RadioSetting("auto_power_off","Auto Power Off (APO)", + RadioSettingValueList(APO_LIST, APO_LIST[_settings.auto_power_off])) + basic.append(rs) + + rs = RadioSetting("voice_prompt","Beep Prompt", + RadioSettingValueList(BEEP_LIST, BEEP_LIST[_settings.voice_prompt])) + basic.append(rs) + + rs = RadioSetting("tbst_freq","Tone Burst Frequency", + RadioSettingValueList(TBSTFREQ_LIST, TBSTFREQ_LIST[_settings.tbst_freq])) + basic.append(rs) + + rs = RadioSetting("choose_tx_power","Max Level of TX Power", + RadioSettingValueList(TXPWR_LIST, TXPWR_LIST[_settings.choose_tx_power])) + basic.append(rs) + + (flow,fhigh) = self.valid_freq[0] + flow /= 1000 + fhigh /= 1000 + fmidrange = (fhigh- flow)/2 + + rs = RadioSetting("txrangelow","TX Freq, Lower Limit (khz)", RadioSettingValueInteger(flow, + flow + fmidrange, + int(_freqrange.txrangelow)/10)) + freqrange.append(rs) + + rs = RadioSetting("txrangehi","TX Freq, Upper Limit (khz)", RadioSettingValueInteger(fhigh-fmidrange, + fhigh, + int(_freqrange.txrangehi)/10)) + freqrange.append(rs) + + rs = RadioSetting("rxrangelow","RX Freq, Lower Limit (khz)", RadioSettingValueInteger(flow, + flow+fmidrange, + int(_freqrange.rxrangelow)/10)) + freqrange.append(rs) + + rs = RadioSetting("rxrangehi","RX Freq, Upper Limit (khz)", RadioSettingValueInteger(fhigh-fmidrange, + fhigh, + int(_freqrange.rxrangehi)/10)) + freqrange.append(rs) + + return settings + + def get_settings(self): + try: + return self._get_settings() + except: + import traceback + LOG.error( "failed to parse settings") + traceback.print_exc() + return None + + def set_settings(self,settings): + _settings = self._memobj.settings + for element in settings: + if not isinstance(element,RadioSetting): + self.set_settings(element) + continue + else: + try: + name = element.get_name() + + if name in ["txrangelow","txrangehi","rxrangelow","rxrangehi"]: + LOG.debug( "setting %s = %s" % (name,int(element.value)*10)) + setattr(self._memobj.freqrange,name,int(element.value)*10) + continue + + if name in ["startname"]: + LOG.debug( "setting %s = %s" % (name, element.value)) + setattr(self._memobj.slabel,name,element.value) + continue + + obj = _settings + setting = element.get_name() + + if element.has_apply_callback(): + LOG.debug( "using apply callback") + element.run_apply_callback() + else: + LOG.debug( "Setting %s = %s" % (setting, element.value)) + setattr(obj, setting, element.value) + except Exception, e: + LOG.debug( element.get_name()) + raise + + @classmethod + def match_model(cls, filedata, filename): + if MMAPSIZE == len(filedata): + (flow,fhigh) = cls.valid_freq[0] + flow /= 1000000 + fhigh /= 1000000 + + txmin=ord(filedata[0x200])*100 + (ord(filedata[0x201])>>4)*10 + ord(filedata[0x201])%16 + txmax=ord(filedata[0x204])*100 + (ord(filedata[0x205])>>4)*10 + ord(filedata[0x205])%16 + rxmin=ord(filedata[0x208])*100 + (ord(filedata[0x209])>>4)*10 + ord(filedata[0x209])%16 + rxmax=ord(filedata[0x20C])*100 + (ord(filedata[0x20D])>>4)*10 + ord(filedata[0x20D])%16 + + if ( rxmin >= flow and rxmax <= fhigh and txmin >= flow and txmax <= fhigh ): + return True + + return False + +(a)directory.register +class Th9000220Radio(Th9000Radio): + """TYT TH-9000 220""" + VENDOR = "TYT" + MODEL = "TH9000_220" + BAUD_RATE = 9600 + valid_freq = [(220000000, 260000000)] + +(a)directory.register +class Th9000144Radio(Th9000220Radio): + """TYT TH-9000 144""" + VENDOR = "TYT" + MODEL = "TH9000_144" + BAUD_RATE = 9600 + valid_freq = [(136000000, 174000000)] + +(a)directory.register +class Th9000440Radio(Th9000220Radio): + """TYT TH-9000 440""" + VENDOR = "TYT" + MODEL = "TH9000_440" + BAUD_RATE = 9600 + valid_freq = [(400000000, 490000000)]

1 0

[chirp_devel] [PATCH] Add missing countries to przemienniki.net query form
by Marco Filippi IZ3GME 07 May '15

07 May '15

# HG changeset patch # User Marco Filippi <iz3gme.marco(a)gmail.com> # Date 1430986923 -7200 # Thu May 07 10:22:03 2015 +0200 # Node ID af4661121f9a0da1455a9f939dcca30f6bf40e1f # Parent a16bb2190c66a496a0d3867106256884a4058ce9 Add missing countries to przemienniki.net query form Implement #2569 diff --git a/chirp/ui/mainapp.py b/chirp/ui/mainapp.py --- a/chirp/ui/mainapp.py +++ b/chirp/ui/mainapp.py @@ -949,8 +949,10 @@ parent=self) fields = { "Country": - (miscwidgets.make_choice(['by', 'cz', 'de', 'lt', 'pl', - 'sk', 'uk'], False), + (miscwidgets.make_choice( + ['at', 'bg', 'by', 'ch', 'cz', 'de', 'dk', 'es', 'fi', + 'fr', 'hu', 'it', 'lt', 'lv', 'no', 'pl', 'ro', 'se', + 'sk', 'ua', 'uk'], False), lambda x: str(x.get_active_text())), "Band": (miscwidgets.make_choice(['10m', '4m', '6m', '2m', '70cm',

1 0

[chirp_devel] Separate OBLTR-8R from TERMN-8R
by Jim Unroe 06 May '15

06 May '15

I made the mistake of assuming that the per-channels structure was the same between the very similar Anytone OBLTR-8R and TERMN-8R radios. It appears that my testers and I missed that the memory bits that control the per-channel squelch are different between the OBLTR-9R and TERMN-8R radio models. I am in the process of determining what else may be different between the 2 radios. If I need to separate these two radios, what is the best way to go about it? Looking at the wouxun.py driver, it appears that the common things like the download/upload routines are at the beginning of the driver and then the radios are separated below that. Is that what I should be attempting to emulate? Thanks, Jim KC9HI

3 5

[chirp_devel] [PATCH] [Th9000] Adding devices file for new radio TYT TH9000D models #1035
by David Fannin 02 May '15

02 May '15

# HG changeset patch # User David Fannin <dfannin(a)sushisoft.com> # Date 1430203203 25200 # Mon Apr 27 23:40:03 2015 -0700 # Node ID 237bb7557e557c689aa8d1863c40f2388b596974 # Parent 31a7494c324a347634c30cc3c9bded2ce83eeb21 [Th9000] Adding devices file for new radio TYT TH9000D models #1035 diff -r 31a7494c324a -r 237bb7557e55 chirp/drivers/th9000.py --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/chirp/drivers/th9000.py Mon Apr 27 23:40:03 2015 -0700 @@ -0,0 +1,839 @@ +# Copyright 2015 David Fannin KK6DF <kk6df(a)arrl.org> +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +import os +import struct +import time +import logging + +from chirp import bitwise +from chirp import chirp_common +from chirp import directory +from chirp import errors +from chirp import memmap +from chirp import util +from chirp.settings import RadioSettingGroup, RadioSetting, RadioSettings, \ + RadioSettingValueList, RadioSettingValueString, RadioSettingValueBoolean, \ + RadioSettingValueInteger, RadioSettingValueString, \ + RadioSettingValueFloat, InvalidValueError + +LOG = logging.getLogger(__name__) + +# +# Chirp Driver for TYT TH-9000D (models: 2M (144 Mhz), 1.25M (220 Mhz) and 70cm (440 Mhz) radios) +# +# Version 1.0 +# +# Note: Features not working: +# - DCS , Cross Signaling +# - Skip channels +# +# Global Parameters +# +MMAPSIZE = 16384 +TONES = [62.5] + list(chirp_common.TONES) +TMODES = ['','Tone','DTCS'] +DUPLEXES = ['','err','-','+'] # index 2 not used +MODES = ['WFM','FM','NFM'] # 25k, 20k,15k bw +TUNING_STEPS=[ 5.0, 6.25, 8.33, 10.0, 12.5, 15.0, 20.0, 25.0, 30.0, 50.0 ] # index 0-9 +POWER_LEVELS=[chirp_common.PowerLevel("High", watts=65), + chirp_common.PowerLevel("Mid", watts=25), + chirp_common.PowerLevel("Low", watts=10)] + +CROSS_MODES = chirp_common.CROSS_MODES + +APO_LIST = [ "Off","30 min","1 hr","2 hrs" ] +BGCOLOR_LIST = ["Blue","Orange","Purple"] +BGBRIGHT_LIST = ["%s" % x for x in range(1,32)] +SQUELCH_LIST = ["Off"] + ["Level %s" % x for x in range(1,20)] +TIMEOUT_LIST = ["Off"] + ["%s min" % x for x in range(1,30)] +TXPWR_LIST = ["60W","25W"] # maximum power for Hi setting +TBSTFREQ_LIST = ["1750Hz","2100Hz","1000Hz","1450Hz"] +BEEP_LIST = ["Off","On"] + +SETTING_LISTS = { + "auto_power_off": APO_LIST, + "bg_color" : BGCOLOR_LIST, + "bg_brightness" : BGBRIGHT_LIST, + "squelch" : SQUELCH_LIST, + "timeout_timer" : TIMEOUT_LIST, + "choose_tx_power": TXPWR_LIST, + "tbst_freq" : TBSTFREQ_LIST, + "voice_prompt" : BEEP_LIST +} + +MEM_FORMAT = """ +#seekto 0x0000; +struct { + u8 unknown0000[16]; + char idhdr[16]; + u8 unknown0001[16]; +} fidhdr; +""" +#Overall Memory Map: +# +# Memory Map (Range 0x0100-3FF0, step 0x10): +# +# Field Start End Size +# (hex) (hex) (hex) +# +# 1 Channel Set Flag 0100 011F 20 +# 2 Channel Skip Flag 0120 013F 20 +# 3 Blank/Unknown 0140 01EF B0 +# 4 Unknown 01F0 01FF 10 +# 5 TX/RX Range 0200 020F 10 +# 6 Bootup Passwd 0210 021F 10 +# 7 Options, Radio 0220 023F 20 +# 8 Unknown 0240 019F +# 8B Startup Label 03E0 03E7 07 +# 9 Channel Bank 2000 38FF 1900 +# Channel 000 2000 201F 20 +# Channel 001 2020 202F 20 +# ... +# Channel 199 38E0 38FF 20 +# 10 Blank/Unknown 3900 3FFF 6FF 14592 16383 1792 +# Total Map Size 16128 (2^8 = 16384) +# +# TH9000/220 memory map +# section: 1 and 2: Channel Set/Skip Flags +# +# Channel Set (starts 0x100) : Channel Set bit is value 0 if a memory location in the channel bank is active. +# Channel Skip (starts 0x120): Channel Skip bit is value 0 if a memory location in the channel bank is active. +# +# Both flag maps are a total 24 bytes in length, aligned on 32 byte records. +# bit = 0 channel set/no skip, 1 is channel not set/skip +# +# to index a channel: +# cbyte = channel / 8 ; +# cbit = channel % 8 ; +# setflag = csetflag[cbyte].c[cbit] ; +# skipflag = cskipflag[cbyte].c[cbit] ; +# +# channel range is 0-199, range is 32 bytes (last 7 unknown) +# +MEM_FORMAT = MEM_FORMAT + """ +#seekto 0x0100; +struct { + bit c[8]; +} csetflag[32]; + +struct { + u8 unknown0100[7]; +} ropt0100; + +#seekto 0x0120; +struct { + bit c[8]; +} cskipflag[32]; + +struct { + u8 unknown0120[7]; +} ropt0120; +""" +# TH9000 memory map +# section: 5 TX/RX Range +# used to set the TX/RX range of the radio (e.g. 222-228Mhz for 220 meter) +# possible to set range for tx/rx +# +MEM_FORMAT = MEM_FORMAT + """ +#seekto 0x0200; +struct { + bbcd txrangelow[4]; + bbcd txrangehi[4]; + bbcd rxrangelow[4]; + bbcd rxrangehi[4]; +} freqrange; +""" +# TH9000 memory map +# section: 6 bootup_passwd +# used to set bootup passwd (see boot_passwd checkbox option) +# +# options - bootup password +# +# bytes:bit type description +# --------------------------------------------------------------------------- +# 6 u8 bootup_passwd[6] bootup passwd, 6 chars, numberic chars 30-39 , see boot_passwd checkbox to set +# 10 u8 unknown; +# + +MEM_FORMAT = MEM_FORMAT + """ +#seekto 0x0210; +struct { + u8 bootup_passwd[6]; + u8 unknown2010[10]; +} ropt0210; +""" +# TH9000/220 memory map +# section: 7 Radio Options +# used to set a number of radio options +# +# bytes:bit type description +# --------------------------------------------------------------------------- +# 1 u8 display_mode display mode, range 0-2, 0=freq,1=channel,2=name (selecting name affects vfo_mr) +# 1 u8 vfo_mr; vfo_mr , 0=vfo, mr=1 +# 1 u8 unknown; +# 1 u8 squelch; squelch level, range 0-19, hex for menu +# 1 u8 unknown[2]; +# 1 u8 channel_lock; if display_mode[channel] selected, then lock=1,no lock =0 +# 1 u8 unknown; +# 1 u8 bg_brightness ; background brightness, range 0-21, hex, menu index +# 1 u8 unknown; +# 1 u8 bg_color ; bg color, menu index, blue 0 , orange 1, purple 2 +# 1 u8 tbst_freq ; tbst freq , menu 0 = 1750Hz, 1=2100 , 2=1000 , 3=1450hz +# 1 u8 timeout_timer; timeout timer, hex, value = minutes, 0= no timeout +# 1 u8 unknown; +# 1 u8 auto_power_off; auto power off, range 0-3, off,30min, 1hr, 2hr, hex menu index +# 1 u8 voice_prompt; voice prompt, value 0,1 , Beep ON = 1, Beep Off = 2 +# +# description of function setup options, starting at 0x0230 +# +# bytes:bit type description +# --------------------------------------------------------------------------- +# 1 u8 // 0 +# :4 unknown:6 +# :1 elim_sql_tail:1 eliminate squelsh tail when no ctcss checkbox (1=checked) +# :1 sql_key_function "squelch off" 1 , "squelch momentary off" 0 , menu index +# 2 u8 unknown[2] /1-2 +# 1 u8 // 3 +# :4 unknown:4 +# :1 inhibit_init_ops:1 //bit 5 +# :1 unknownD:1 +# :1 inhibit_setup_bg_chk:1 //bit 7 +# :1 unknown:1 +# 1 u8 tail_elim_type menu , (off=0,120=1,180=2), // 4 +# 1 u8 choose_tx_power menu , (60w=0,25w=1) // 5 +# 2 u8 unknown[2]; // 6-7 +# 1 u8 bootup_passwd_flag checkbox 1=on, 0=off // 8 +# 7 u8 unknown[7]; // 9-F +# +MEM_FORMAT = MEM_FORMAT + """ +#seekto 0x0220; +struct { + u8 display_mode; + u8 vfo_mr; + u8 unknown0220A; + u8 squelch; + u8 unknown0220B[2]; + u8 channel_lock; + u8 unknown0220C; + u8 bg_brightness; + u8 unknown0220D; + u8 bg_color; + u8 tbst_freq; + u8 timeout_timer; + u8 unknown0220E; + u8 auto_power_off; + u8 voice_prompt; + u8 unknown0230A:6, + elim_sql_tail:1, + sql_key_function:1; + u8 unknown0230B[2]; + u8 unknown0230C:4, + inhibit_init_ops:1, + unknown0230D:1, + inhibit_setup_bg_chk:1, + unknown0230E:1; + u8 tail_elim_type; + u8 choose_tx_power; + u8 unknown0230F[2]; + u8 bootup_passwd_flag; + u8 unknown0230G[7]; +} settings; +""" +# TH9000 memory map +# section: 8B Startup Label +# +# bytes:bit type description +# --------------------------------------------------------------------------- +# 7 char start_label[7] label displayed at startup (usually your call sign) +# +MEM_FORMAT = MEM_FORMAT + """ +#seekto 0x03E0; +struct { + char startname[7]; +} slabel; +""" +# TH9000/220 memory map +# section: 9 Channel Bank +# description of channel bank (200 channels , range 0-199) +# Each 32 Byte (0x20 hex) record: +# bytes:bit type description +# --------------------------------------------------------------------------- +# 4 bbcd freq[4] receive frequency in packed binary coded decimal +# 4 bbcd offset[4] transmit offset in packed binary coded decimal (note: plus/minus direction set by 'duplex' field) +# 1 u8 +# :4 unknown:4 +# :4 tuning_step:4 tuning step, menu index value from 0-9 +# 5,6.25,8.33,10,12.5,15,20,25,30,50 +# 1 u8 +# :4 unknown:4 not yet decoded, used for DCS coding? +# :2 channel_width:2 channel spacing, menu index value from 0-3 +# 25,20,12.5 +# :1 reverse:1 reverse flag, 0=off, 1=on (reverses tx and rx freqs) +# :1 txoff:1 transmitt off flag, 0=transmit , 1=do not transmit +# 1 u8 +# :1 talkaround:1 talkaround flag, 0=off, 1=on (bypasses repeater) +# :1 compander:1 compander flag, 0=off, 1=on (turns on/off voice compander option) +# :2 unknown:2 +# :2 power:2 tx power setting, value range 0-2, 0=hi,1=med,2=lo +# :2 duplex:2 duplex settings, 0=simplex,2= minus(-) offset, 3= plus (+) offset (see offset field) +# +# 1 u8 +# :4 unknown:4 +# :2 rxtmode:2 rx tone mode, value range 0-2, 0=none, 1=CTCSS, 2=DCS (ctcss tone in field rxtone) +# :2 txtmode:2 tx tone mode, value range 0-2, 0=none, 1=CTCSS, 3=DCS (ctcss tone in field txtone) +# 1 u8 +# :2 unknown:2 +# :6 txtone:6 tx ctcss tone, menu index +# 1 u8 +# :2 unknown:2 +# :6 rxtone:6 rx ctcss tone, menu index +# 1 u8 txcode ?, not used for ctcss +# 1 u8 rxcode ?, not used for ctcss +# 3 u8 unknown[3] +# 7 char name[7] 7 byte char string for channel name +# 1 u8 +# :6 unknown:6, +# :2 busychannellockout:2 busy channel lockout option , 0=off, 1=repeater, 2=busy (lock out tx if channel busy) +# 4 u8 unknownI[4]; +# 1 u8 +# :7 unknown:7 +# :1 scrambler:1 scrambler flag, 0=off, 1=on (turns on tyt scrambler option) +# +MEM_FORMAT = MEM_FORMAT + """ +#seekto 0x2000; +struct { + bbcd freq[4]; + bbcd offset[4]; + u8 unknown2000A:4, + tuning_step:4; + u8 unknown2000B:4, + channel_width:2, + reverse:1, + txoff:1; + u8 talkaround:1, + compander:1, + unknown2000C:2, + power:2, + duplex:2; + u8 unknown2000D:4, + rxtmode:2, + txtmode:2; + u8 unknown2000E:2, + txtone:6; + u8 unknown2000F:2, + rxtone:6; + u8 txcode; + u8 rxcode; + u8 unknown2000G[3]; + char name[7]; + u8 unknown2000H:6, + busychannellockout:2; + u8 unknown2000I[4]; + u8 unknown2000J:7, + scrambler:1; +} memory[200] ; +""" + +def _echo_write(radio, data): + try: + radio.pipe.write(data) + radio.pipe.read(len(data)) + except Exception, e: + LOG.error("Error writing to radio: %s" % e) + raise errors.RadioError("Unable to write to radio") + + +def _checksum(data): + cs = 0 + for byte in data: + cs += ord(byte) + return cs % 256 + +def _read(radio, length): + try: + data = radio.pipe.read(length) + except Exception, e: + LOG.error( "Error reading from radio: %s" % e) + raise errors.RadioError("Unable to read from radio") + + if len(data) != length: + LOG.error( "Short read from radio (%i, expected %i)" % (len(data), + length)) + LOG.debug(util.hexprint(data)) + raise errors.RadioError("Short read from radio") + return data + + + +def _ident(radio): + radio.pipe.setTimeout(1) + _echo_write(radio,"PROGRAM") + response = radio.pipe.read(3) + if response != "QX\06": + LOG.debug( "Response was :\n%s" % util.hexprint(response)) + raise errors.RadioError("Unsupported model") + _echo_write(radio, "\x02") + response = radio.pipe.read(16) + LOG.debug(util.hexprint(response)) + if response[1:8] != "TH-9000": + LOG.error( "Looking for:\n%s" % util.hexprint("TH-9000")) + LOG.error( "Response was:\n%s" % util.hexprint(response)) + raise errors.RadioError("Unsupported model") + +def _send(radio, cmd, addr, length, data=None): + frame = struct.pack(">cHb", cmd, addr, length) + if data: + frame += data + frame += chr(_checksum(frame[1:])) + frame += "\x06" + _echo_write(radio, frame) + LOG.debug("Sent:\n%s" % util.hexprint(frame)) + if data: + result = radio.pipe.read(1) + if result != "\x06": + LOG.debug( "Ack was: %s" % repr(result)) + raise errors.RadioError("Radio did not accept block at %04x" % addr) + return + result = _read(radio, length + 6) + LOG.debug("Got:\n%s" % util.hexprint(result)) + header = result[0:4] + data = result[4:-2] + ack = result[-1] + if ack != "\x06": + LOG.debug("Ack was: %s" % repr(ack)) + raise errors.RadioError("Radio NAK'd block at %04x" % addr) + _cmd, _addr, _length = struct.unpack(">cHb", header) + if _addr != addr or _length != _length: + LOG.debug( "Expected/Received:") + LOG.debug(" Length: %02x/%02x" % (length, _length)) + LOG.debug( " Addr: %04x/%04x" % (addr, _addr)) + raise errors.RadioError("Radio send unexpected block") + cs = _checksum(result[1:-2]) + if cs != ord(result[-2]): + LOG.debug( "Calculated: %02x" % cs) + LOG.debug( "Actual: %02x" % ord(result[-2])) + raise errors.RadioError("Block at 0x%04x failed checksum" % addr) + return data + + +def _finish(radio): + endframe = "\x45\x4E\x44" + _echo_write(radio, endframe) + result = radio.pipe.read(1) + if result != "\x06": + LOG.error( "Got:\n%s" % util.hexprint(result)) + raise errors.RadioError("Radio did not finish cleanly") + +def do_download(radio): + + _ident(radio) + + _memobj = None + data = "" + + for start,end in radio._ranges: + for addr in range(start,end,0x10): + block = _send(radio,'R',addr,0x10) + data += block + status = chirp_common.Status() + status.cur = len(data) + status.max = end + status.msg = "Downloading from radio" + radio.status_fn(status) + + _finish(radio) + + return memmap.MemoryMap(data) + +def do_upload(radio): + + _ident(radio) + + for start,end in radio._ranges: + for addr in range(start,end,0x10): + if addr < 0x0100: + continue + block = radio._mmap[addr:addr+0x10] + _send(radio,'W',addr,len(block),block) + status = chirp_common.Status() + status.cur = addr + status.max = end + status.msg = "Uploading to Radio" + radio.status_fn(status) + + _finish(radio) + + + +# +# The base class, extended for use with other models +# +(a)directory.register +class Th9000Radio(chirp_common.CloneModeRadio, + chirp_common.ExperimentalRadio): + """TYT TH-9000""" + VENDOR = "TYT" + MODEL = "TH9000 Base" + BAUD_RATE = 9600 + valid_freq = [(900000000, 999000000)] + + + _memsize = MMAPSIZE + _ranges = [(0x0000,0x4000)] + + @classmethod + def get_prompts(cls): + rp = chirp_common.RadioPrompts() + rp.experimental = ("The TYT TH-9000 driver is an beta version." + "Proceed with Caution and backup your data") + return rp + + def get_features(self): + rf = chirp_common.RadioFeatures() + rf.has_settings = True + rf.has_bank = False + rf.has_cross = True + rf.has_tuning_step = False + rf.has_rx_dtcs = True + rf.valid_skips = ["","S"] + rf.memory_bounds = (0, 199) + rf.valid_name_length = 7 + rf.valid_characters = chirp_common.CHARSET_UPPER_NUMERIC + "-" + rf.valid_modes = MODES + rf.valid_tmodes = chirp_common.TONE_MODES + rf.valid_cross_modes = CROSS_MODES + rf.valid_power_levels = POWER_LEVELS + rf.valid_dtcs_codes = chirp_common.ALL_DTCS_CODES + rf.valid_bands = self.valid_freq + return rf + + # Do a download of the radio from the serial port + def sync_in(self): + self._mmap = do_download(self) + self.process_mmap() + + # Do an upload of the radio to the serial port + def sync_out(self): + do_upload(self) + + def process_mmap(self): + self._memobj = bitwise.parse(MEM_FORMAT, self._mmap) + + + # Return a raw representation of the memory object, which + # is very helpful for development + def get_raw_memory(self, number): + return repr(self._memobj.memory[number]) + + # not working yet + def _get_dcs_index(self, _mem,which): + base = getattr(_mem, '%scode' % which) + extra = getattr(_mem, '%sdcsextra' % which) + return (int(extra) << 8) | int(base) + + def _set_dcs_index(self, _mem, which, index): + base = getattr(_mem, '%scode' % which) + extra = getattr(_mem, '%sdcsextra' % which) + base.set_value(index & 0xFF) + extra.set_value(index >> 8) + + + # Extract a high-level memory object from the low-level memory map + # This is called to populate a memory in the UI + def get_memory(self, number): + # Get a low-level memory object mapped to the image + _mem = self._memobj.memory[number] + + # get flag info + cbyte = number / 8 ; + cbit = 7 - (number % 8) ; + setflag = self._memobj.csetflag[cbyte].c[cbit]; + skipflag = self._memobj.cskipflag[cbyte].c[cbit]; + + mem = chirp_common.Memory() + + mem.number = number # Set the memory number + + if setflag == 1: + mem.empty = True + return mem + + mem.freq = int(_mem.freq) * 100 + mem.offset = int(_mem.offset) * 100 + mem.name = str(_mem.name).rstrip() # Set the alpha tag + mem.duplex = DUPLEXES[_mem.duplex] + mem.mode = MODES[_mem.channel_width] + mem.power = POWER_LEVELS[_mem.power] + + rxtone = txtone = None + + + rxmode = TMODES[_mem.rxtmode] + txmode = TMODES[_mem.txtmode] + + + rxpol = txpol = "" + + # doesn't work + if rxmode == "Tone": + rxpol = "" + rxtone = TONES[_mem.rxtone] + elif rxmode == "DTCS": + rxpol = "N" + rxtone = chirp_common.ALL_DTCS_CODES[self._get_dcs_index(_mem,'rx')] + + if txmode == "Tone": + txpol = "" + txtone = TONES[_mem.txtone] + elif txmode == "DTCS": + txpol = "N" + txtone = chirp_common.ALL_DTCS_CODES[self._get_dcs_index(_mem,'tx')] + + + chirp_common.split_tone_decode(mem, + (txmode, txtone, txpol), + (rxmode, rxtone, rxpol)) + + mem.skip = "S" if skipflag == 1 else "" + + + # We'll consider any blank (i.e. 0MHz frequency) to be empty + if mem.freq == 0: + mem.empty = True + + return mem + + # Store details about a high-level memory to the memory map + # This is called when a user edits a memory in the UI + def set_memory(self, mem): + # Get a low-level memory object mapped to the image + + _mem = self._memobj.memory[mem.number] + + cbyte = mem.number / 8 + cbit = 7 - (mem.number % 8) + + if mem.empty: + self._memobj.csetflag[cbyte].c[cbit] = 1 + self._memobj.cskipflag[cbyte].c[cbit] = 1 + return + + self._memobj.csetflag[cbyte].c[cbit] = 0 + self._memobj.cskipflag[cbyte].c[cbit] = 1 if (mem.skip == "S") else 0 + + _mem.set_raw("\x00" * 32) + + _mem.freq = mem.freq / 100 # Convert to low-level frequency + _mem.offset = mem.offset / 100 # Convert to low-level frequency + + _mem.name = mem.name.ljust(7)[:7] # Store the alpha tag + _mem.duplex = DUPLEXES.index(mem.duplex) + + + try: + _mem.channel_width = MODES.index(mem.mode) + except ValueError: + _mem.channel_width = 0 + + ((txmode, txtone, txpol), + (rxmode, rxtone, rxpol)) = chirp_common.split_tone_encode(mem) + + _mem.txtmode = TMODES.index(txmode) + _mem.rxtmode = TMODES.index(rxmode) + + if txmode == "Tone": + _mem.txtone = TONES.index(txtone) + elif txmode == "DTCS": + self._set_dcs_index(_mem,'tx',chirp_common.ALL_DTCS_CODES.index(txtone)) + + if rxmode == "Tone": + _mem.rxtone = TONES.index(rxtone) + elif rxmode == "DTCS": + self._set_dcs_index(_mem, 'rx', chirp_common.ALL_DTCS_CODES.index(rxtone)) + + #_mem.txinv = txpol == "N" + #_mem.rxinv = rxpol == "N" + + + if mem.power: + _mem.power = POWER_LEVELS.index(mem.power) + else: + _mem.power = 0 + + def _get_settings(self): + _settings = self._memobj.settings + _freqrange = self._memobj.freqrange + _slabel = self._memobj.slabel + + basic = RadioSettingGroup("basic","Global Settings") + freqrange = RadioSettingGroup("freqrange","Frequency Ranges") + top = RadioSettingGroup("top","All Settings",basic,freqrange) + settings = RadioSettings(top) + + def _filter(name): + filtered = "" + for char in str(name): + if char in chirp_common.CHARSET_ASCII: + filtered += char + else: + filtered += "" + return filtered + + val = RadioSettingValueString(0,7,_filter(_slabel.startname)) + rs = RadioSetting("startname","Startup Label",val) + basic.append(rs) + + rs = RadioSetting("bg_color","LCD Color", + RadioSettingValueList(BGCOLOR_LIST, BGCOLOR_LIST[_settings.bg_color])) + basic.append(rs) + + rs = RadioSetting("bg_brightness","LCD Brightness", + RadioSettingValueList(BGBRIGHT_LIST, BGBRIGHT_LIST[_settings.bg_brightness])) + basic.append(rs) + + rs = RadioSetting("squelch","Squelch Level", + RadioSettingValueList(SQUELCH_LIST, SQUELCH_LIST[_settings.squelch])) + basic.append(rs) + + rs = RadioSetting("timeout_timer","Timeout Timer (TOT)", + RadioSettingValueList(TIMEOUT_LIST, TIMEOUT_LIST[_settings.timeout_timer])) + basic.append(rs) + + rs = RadioSetting("auto_power_off","Auto Power Off (APO)", + RadioSettingValueList(APO_LIST, APO_LIST[_settings.auto_power_off])) + basic.append(rs) + + rs = RadioSetting("voice_prompt","Beep Prompt", + RadioSettingValueList(BEEP_LIST, BEEP_LIST[_settings.voice_prompt])) + basic.append(rs) + + rs = RadioSetting("tbst_freq","Tone Burst Frequency", + RadioSettingValueList(TBSTFREQ_LIST, TBSTFREQ_LIST[_settings.tbst_freq])) + basic.append(rs) + + rs = RadioSetting("choose_tx_power","Max Level of TX Power", + RadioSettingValueList(TXPWR_LIST, TXPWR_LIST[_settings.choose_tx_power])) + basic.append(rs) + + (flow,fhigh) = self.valid_freq[0] + flow /= 1000 + fhigh /= 1000 + fmidrange = (fhigh- flow)/2 + + rs = RadioSetting("txrangelow","TX Freq, Lower Limit (khz)", RadioSettingValueInteger(flow, + flow + fmidrange, + int(_freqrange.txrangelow)/10)) + freqrange.append(rs) + + rs = RadioSetting("txrangehi","TX Freq, Upper Limit (khz)", RadioSettingValueInteger(fhigh-fmidrange, + fhigh, + int(_freqrange.txrangehi)/10)) + freqrange.append(rs) + + rs = RadioSetting("rxrangelow","RX Freq, Lower Limit (khz)", RadioSettingValueInteger(flow, + flow+fmidrange, + int(_freqrange.rxrangelow)/10)) + freqrange.append(rs) + + rs = RadioSetting("rxrangehi","RX Freq, Upper Limit (khz)", RadioSettingValueInteger(fhigh-fmidrange, + fhigh, + int(_freqrange.rxrangehi)/10)) + freqrange.append(rs) + + return settings + + def get_settings(self): + try: + return self._get_settings() + except: + import traceback + LOG.error( "failed to parse settings") + traceback.print_exc() + return None + + def set_settings(self,settings): + _settings = self._memobj.settings + for element in settings: + if not isinstance(element,RadioSetting): + self.set_settings(element) + continue + else: + try: + name = element.get_name() + + if name in ["txrangelow","txrangehi","rxrangelow","rxrangehi"]: + LOG.debug( "setting %s = %s" % (name,int(element.value)*10)) + setattr(self._memobj.freqrange,name,int(element.value)*10) + continue + + if name in ["startname"]: + LOG.debug( "setting %s = %s" % (name, element.value)) + setattr(self._memobj.slabel,name,element.value) + continue + + obj = _settings + setting = element.get_name() + + if element.has_apply_callback(): + LOG.debug( "using apply callback") + element.run_apply_callback() + else: + LOG.debug( "Setting %s = %s" % (setting, element.value)) + setattr(obj, setting, element.value) + except Exception, e: + LOG.debug( element.get_name()) + raise + + @classmethod + def match_model(cls, filedata, filename): + if MMAPSIZE == len(filedata): + (flow,fhigh) = cls.valid_freq[0] + flow /= 1000000 + fhigh /= 1000000 + + txmin=ord(filedata[0x200])*100 + (ord(filedata[0x201])>>4)*10 + ord(filedata[0x201])%16 + txmax=ord(filedata[0x204])*100 + (ord(filedata[0x205])>>4)*10 + ord(filedata[0x205])%16 + rxmin=ord(filedata[0x208])*100 + (ord(filedata[0x209])>>4)*10 + ord(filedata[0x209])%16 + rxmax=ord(filedata[0x20C])*100 + (ord(filedata[0x20D])>>4)*10 + ord(filedata[0x20D])%16 + + if ( rxmin >= flow and rxmax <= fhigh and txmin >= flow and txmax <= fhigh ): + return True + + return False + +(a)directory.register +class Th9000220Radio(Th9000Radio): + """TYT TH-9000 220""" + VENDOR = "TYT" + MODEL = "TH9000_220" + BAUD_RATE = 9600 + valid_freq = [(220000000, 260000000)] + +(a)directory.register +class Th9000144Radio(Th9000220Radio): + """TYT TH-9000 144""" + VENDOR = "TYT" + MODEL = "TH9000_144" + BAUD_RATE = 9600 + valid_freq = [(136000000, 174000000)] + +(a)directory.register +class Th9000440Radio(Th9000220Radio): + """TYT TH-9000 440""" + VENDOR = "TYT" + MODEL = "TH9000_440" + BAUD_RATE = 9600 + valid_freq = [(400000000, 490000000)]

2 2

[chirp_devel] Baofeng UV-B5 Wide Splits and Cross-Band Programming
by Jim Unroe 02 May '15

02 May '15

Hi All, This weekend I accidentally discovered that the UV-B5/B6 radios can be programmed with any frequency split across the band and not just the 69.995 MHz maximum offset when programming from the keypad. In addition to that, the radio can also be successfully programmed for cross-band operation. The following code currently limits CHIRP to programming these radios with maximun offset of 69.995 MHz in a single band with no checking to make sure that the offset doesn't put the TX frequency out of the working band of the radio. def validate_memory(self, mem): msgs = chirp_common.CloneModeRadio.validate_memory(self, mem) if (mem.duplex == "split" and abs(mem.freq - mem.offset) > 69995000) \ or (mem.duplex in ["+", "-"] and mem.offset > 69995000): msgs.append(chirp_common.ValidationError( "Max split is 69.995MHz")) return msgs What I propose to do is change the code to something like the following. It allows programming any split within the VHF or UHF band and any cross-band pair of frequencies. If the user programs an Offset or Split frequency that puts the TX frequency outside of the band limits, an error is displayed. def validate_memory(self, mem): msgs = chirp_common.CloneModeRadio.validate_memory(self, mem) valid = False for lo, hi in VALID_BANDS: if mem.duplex == "split": freq=chirp_common.format_freq(mem.offset) _msg = "Offset %s is out of supported range" % freq if lo <= mem.offset < hi: valid = True break elif mem.duplex == "-": freq=chirp_common.format_freq(mem.offset) _msg = "Offset %s is out of supported range" % freq if lo <= mem.freq - mem.offset < hi: valid = True break elif mem.duplex == "+": freq=chirp_common.format_freq(mem.offset) _msg = "Offset %s is out of supported range" % freq if lo <= mem.freq + mem.offset < hi: valid = True break elif not mem.duplex in ["+", "-", "split"]: _msg = " " if lo <= mem.freq < hi: valid = True break if not valid: msgs.append(chirp_common.ValidationError(_msg)) return msgs My question is... Is there a more tidy way to code this or should I go ahead and submit something like this? Thanks, Jim KC9HI

3 9

[chirp_devel] Build test results: Successful
by Build System 01 May '15

01 May '15

Tested changes: [Tyler Tidman <tyler.tidman(a)draak.ca>] Add French VHF Marine channel stock config. Fixes #1809. [Jim Unroe <rock.unroe(a)gmail.com>] [UV-B5] Remove local "validate_memory" helper Remove the local "validate_memory" helper and the 70 MHz maximum split limit that it imposes. Related to #2559 [Marco Filippi <iz3gme.marco(a)gmail.com>] Add tx freq check Add TX frequency check to common memory validation routine to ensure it always fall withing radio supported ranges, including when split is set Also fix bruteforce test which was using a too low RX freq with - split Implement #2557 [Jim Unroe <rock.unroe(a)gmail.com>] [BF-F8HP] Add Support for New Firmware String Add detection for F5R3407 firmware. related to #2551 [Richard Cochran <ag6qr(a)sonic.net>] [ft2900] Fix checksum calc for Euro version of FT-2900/FT-1900 (#2501) This patch fixes the checksum calculation for the European versions of the FT-2900/FT-1900 radio. The US and Euro versions have different IDBLOCK strings. It turns out that the radio's checksum algorithm includes the IDBLOCK data as it calculates the checksum, but the original CHIRP ft2900 driver code hadn't taken this into account. The differences in the IDBLOCK strings were causing checksum mismatch. [Jim Unroe <rock.unroe(a)gmail.com>] [termn8r] Add Anytone TERMN-8R Support #2437 Add most "Function Setup" settings that are common to the OBLTR-8R and TERMN-8R radios. related to #2437 [Chris Fosnight <chris.fosnight(a)gmail.com>] [ft60] Corrects minor typos in UI. Fixes #2535 Changes "CTCSS/DSC/DTMF Settings" to "CTCSS/DCS/DTMF Settings". Changes Miscellaneous Settings "Bush Channel Lock-Out" to "Busy Channel Lock-Out". #2535 Full log: Started by an SCM change Building in workspace /var/lib/jenkins/jobs/chirp-test/workspace [workspace] $ hg showconfig paths.default [workspace] $ hg pull --rev default [workspace] $ hg update --clean --rev default 8 files updated, 0 files merged, 0 files removed, 0 files unresolved [workspace] $ hg log --rev . --template {node} [workspace] $ hg log --rev . --template {rev} [workspace] $ hg log --rev 31a7494c324a347634c30cc3c9bded2ce83eeb21 [workspace] $ hg log --template "<changeset node='{node}' author='{author|xmlescape}' rev='{rev}' date='{date}'><msg>{desc|xmlescape}</msg><added>{file_adds|stringify|xmlescape}</added><deleted>{file_dels|stringify|xmlescape}</deleted><files>{files|stringify|xmlescape}</files><parents>{parents}</parents></changeset>\n" --rev default:0 --follow --prune 31a7494c324a347634c30cc3c9bded2ce83eeb21 No emails were triggered. [workspace] $ /bin/sh -xe /tmp/hudson4216230272031339002.sh + ./run_all_tests.sh test_bit_array (tests.unit.test_bitwise.TestBitType) ... ok test_bit_array_fail (tests.unit.test_bitwise.TestBitType) ... ok test_bitfield_u16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_u24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_u8 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_ul16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_ul24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_bbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_lbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_lbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_int_array (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u8 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_char (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string_invalid_chars (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string_wrong_length (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_comment_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok test_comment_inline_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok test_missing_semicolon (tests.unit.test_bitwise.TestBitwiseErrors) ... ok test_seek (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_seekto (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_struct_one_element (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_two_elements (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_writes (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok split_tone_encode_test_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_none (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_none (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_fix_rounded_step_250 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_500 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_750 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_12_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_2_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_5_0 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_6_25 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_fractional_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step_fail (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_format_freq (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_bad (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_decimal (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whitespace (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whole (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_ensure_has_calls_almost_full (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_empty (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_partial (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full1 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full2 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_urcall_full (tests.unit.test_import_logic.DstarTests) ... ok test_import_bank (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffA_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffB_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_negative (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_too_big_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_uhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_errors (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_warnings (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_invalid (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_am (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_fm (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_name (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_closest (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_dst (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_src (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_same (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffA_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffB_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModelIndexInterface) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_icom_bank (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_index_bounds (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_next_mapping_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_auto_tone_mode_cross (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_pol (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_rx (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tone (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tsql (tests.unit.test_memedit_edits.TestEdits) ... ok test_init (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_bad_portnames (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_sorted (tests.unit.test_platform.Win32PlatformTest) ... ok test_apply_callback (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_group (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_multi (tests.unit.test_settings.TestSettingContainers) ... ok test_changed (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_boolean (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_float (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_integer (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_list (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_string (tests.unit.test_settings.TestSettingValues) ... ok test_validate_callback (tests.unit.test_settings.TestSettingValues) ... ok test_delete_hole_with_all (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_all_full (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_without_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_with_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_without_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok ---------------------------------------------------------------------- Ran 151 tests in 0.127s OK Patch 'tip' is OK Checking for PEP8 regressions... real 0m12.898s user 0m10.090s sys 0m0.203s ================================================ Tests OK Email was triggered for: Success Sending email for trigger: Success

1 0