- Developers - lists.chirpmyradio.com

[chirp_devel] [PATCH][ft2900] Add msg for attempt to upload to locked radio Fixes #3055
by Richard Cochran 19 Dec '15

19 Dec '15

# HG changeset patch # User Richard Cochran <ag6qr(a)sonic.net> # Date 1450033763 28800 # Sun Dec 13 11:09:23 2015 -0800 # Node ID 3e1e59a79ff9d62d96866daf8552002a2423db2d # Parent 95684405e6c32047c1d9e61a0e152cb198cbaf27 [ft2900] Add msg for attempt to upload to locked radio Fixes #3055 A FT-2900/FT-1900 may be "locked" preventing configuration changes. An upload will fail if this is the case. This patch adds some text to the upload dialog box to help the user avoid attempting to upload to a "locked" radio. It also adds some text to the error message to suggest the user check to make sure his radio is not locked. diff -r 95684405e6c3 -r 3e1e59a79ff9 chirp/drivers/ft2900.py --- a/chirp/drivers/ft2900.py Mon Nov 30 10:15:59 2015 -0800 +++ b/chirp/drivers/ft2900.py Sun Dec 13 11:09:23 2015 -0800 @@ -132,7 +132,8 @@ ack = radio.pipe.read(300) LOG.debug("Ack was (%i):\n%s" % (len(ack), util.hexprint(ack))) if ack != ACK: - raise Exception("Radio did not ack ID") + raise Exception("Radio did not ack ID. Check cable, verify radio is not locked.\n" + " (press & Hold red \"*L\" button to unlock radio if needed)") block = 0 cs = INITIAL_CHECKSUM @@ -637,7 +638,12 @@ 2. Connect data cable. 3. While holding "A/N LOW" button, turn radio on. 4. Press "MW D/MR" to receive image. - 5. Click OK to dismiss this dialog and start transfer.""")) + 5. Make sure display says "-WAIT-" (see note below if not) + 6. Click OK to dismiss this dialog and start transfer. + + Note: if you don't see "-WAIT-" at step 5, try cycling + power and pressing and holding red "*L" button to unlock + radio, then start back at step 1.""")) return rp

2 1

[chirp_devel] [PATCH] [IC-7000] Add support for channel banks fixes #551
by Joseph.P.Scanlan＠n7xsd.us 18 Dec '15

18 Dec '15

# HG changeset patch # User <Joseph.P.Scanlan(a)n7xsd.us> # Date 1450460526 28800 # Fri Dec 18 09:42:06 2015 -0800 # Node ID 3553a9c72edf6601a36a6be900a50928f346aa25 # Parent a271f317235546d12f9a9c1b25ad22fc94d88c1a [IC-7000] Add support for channel banks fixes #551 It's possible this patch breaks memory delete on the Icom IC-746 or IC-7200. It's also possible the patch fixes memory delete. This patch was only tested on an IC-7000. diff -r a271f3172355 -r 3553a9c72edf chirp/drivers/icomciv.py --- a/chirp/drivers/icomciv.py Fri Dec 11 09:17:39 2015 -0800 +++ b/chirp/drivers/icomciv.py Fri Dec 18 09:42:06 2015 -0800 @@ -14,8 +14,8 @@ u8 unknown2:5, mode:3; """ -MEM_VFO_FORMAT = """ -u8 vfo; +MEM_IC7000_FORMAT = """ +u8 bank; bbcd number[2]; u8 unknown1; lbcd freq[5]; @@ -149,15 +149,24 @@ self._data = MemoryMap("".join(["\x00"] * (self.get_obj().size() / 8))) -class MultiVFOMemFrame(MemFrame): - """A memory frame for radios with multiple VFOs""" - def set_location(self, loc, vfo=1): +class BankMemFrame(MemFrame): + """A memory frame for radios with multiple banks""" + _bnk = 0 + + def set_location(self, loc, bank=1): self._loc = loc - self._data = struct.pack(">BH", vfo, int("%04i" % loc, 16)) + self._bnk = bank + self._data = struct.pack(">BH", int("%02i" % bank, 16), + int("%04i" % loc, 16)) + + def make_empty(self): + """Mark as empty so the radio will erase the memory""" + self._data = struct.pack(">BHB", int("%02i" % self._bnk, 16), + int("%04i" % self._loc, 16), 0xFF) def get_obj(self): self._data = MemoryMap(str(self._data)) # Make sure we're assignable - return bitwise.parse(MEM_VFO_FORMAT, self._data) + return bitwise.parse(MEM_IC7000_FORMAT, self._data) class DupToneMemFrame(MemFrame): @@ -173,6 +182,12 @@ _model = "\x00" _template = 0 + def mem_to_ch_bnk(self, mem): + l, h = self._bank_index_bounds + bank_no = (mem // (h - l + 1)) + l + channel = mem % (h - l + 1) + l + return (channel, bank_no) + def _send_frame(self, frame): return frame.send(ord(self._model), 0xE0, self.pipe, willecho=self._willecho) @@ -237,10 +252,26 @@ f.read(self.pipe) return repr(f.get_obj()) +# We have a simple mapping between the memory location in the frequency +# editor and (bank, channel) of the radio. The mapping doesn't +# change so we use a little math to calculate what bank a location +# is in. We can't change the bank a location is in so we just pass. + def _get_bank(self, loc): + l, h = self._bank_index_bounds + return loc // (h - l + 1) + + def _set_bank(self, loc, bank): + pass + def get_memory(self, number): LOG.debug("Getting %i" % number) f = self._classes["mem"]() - f.set_location(number) + if self._rf.has_bank: + ch, bnk = self.mem_to_ch_bnk(number) + f.set_location(ch, bnk) + LOG.debug("Bank %i, Channel %02i" % (bnk, ch)) + else: + f.set_location(number) self._send_frame(f) mem = chirp_common.Memory() @@ -290,18 +321,37 @@ return mem def set_memory(self, mem): + LOG.debug("Setting %i" % mem.number) + if self._rf.has_bank: + ch, bnk = self.mem_to_ch_bnk(mem.number) + LOG.debug("Bank %i, Channel %02i" % (bnk, ch)) f = self._get_template_memory() if mem.empty: - f.set_location(mem.number) + if self._rf.has_bank: + f.set_location(ch, bnk) + else: + f.set_location(mem.number) + LOG.debug("Making %i empty" % mem.number) f.make_empty() self._send_frame(f) + +# The next two lines accept the radio's status after setting the memory +# and reports the results to the debug log. This is needed for the +# IC-7000. No testing was done to see if it breaks memory delete on the +# IC-746 or IC-7200. + f = self._recv_frame() + LOG.debug("Result:\n%s" % util.hexprint(f.get_data())) return # f.set_data(MemoryMap(self.get_raw_memory(mem.number))) # f.initialize() memobj = f.get_obj() - memobj.number = mem.number + if self._rf.has_bank: + memobj.bank = bnk + memobj.number = ch + else: + memobj.number = mem.number memobj.freq = int(mem.freq) memobj.mode = self._rf.valid_modes.index(mem.mode) if self._rf.has_name: @@ -344,6 +394,8 @@ _model = "\x76" _template = 201 + _num_banks = 1 # Banks not supported + def _initialize(self): self._rf.has_bank = False self._rf.has_dtcs_polarity = False @@ -363,13 +415,17 @@ @directory.register class Icom7000Radio(IcomCIVRadio): """Icom IC-7000""" - MODEL = "7000" + MODEL = "IC-7000" _model = "\x70" _template = 102 + _num_banks = 5 # Banks A-E + _bank_index_bounds = (1, 99) + _bank_class = icf.IcomBank + def _initialize(self): - self._classes["mem"] = MultiVFOMemFrame - self._rf.has_bank = False + self._classes["mem"] = BankMemFrame + self._rf.has_bank = True self._rf.has_dtcs_polarity = True self._rf.has_dtcs = True self._rf.has_ctone = True @@ -384,7 +440,7 @@ self._rf.valid_skips = [] self._rf.valid_name_length = 9 self._rf.valid_characters = chirp_common.CHARSET_ASCII - self._rf.memory_bounds = (1, 99) + self._rf.memory_bounds = (0, 99 * self._num_banks - 1) @directory.register @@ -395,6 +451,8 @@ _model = "\x56" _template = 102 + _num_banks = 1 # Banks not supported + def _initialize(self): self._classes["mem"] = DupToneMemFrame self._rf.has_bank = False

1 0

[chirp_devel] New chirp developer starting to work on FT-50 driver
by Mark Adams 16 Dec '15

16 Dec '15

Hello everyone! I am new to chirp development. I thought I would take a shot at rewriting the FT-50 driver to the new bitwise format and hopefully get the driver working. I know several people have attempted this in the past but it hasn't quite been completed. If anyone has worked on this driver before and has any info that may help I'd appreciate it if you sent it my way. Also, I've been looking through several of the drivers and they all seem to have a little different style. Anyone know which driver is closest to the "ideal" style so I can model my code in the same form? Or perhaps at least which Yaesu driver is the best one to follow. Thanks!

2 1

[chirp_devel] [ic7000]Digital Code Squelch for IC-7000 channels. Fixes bug #3047
by Joseph.P.Scanlan＠n7xsd.us 11 Dec '15

11 Dec '15

# HG changeset patch # User <Joseph.P.Scanlan(a)n7xsd.us> # Date 1449768806 28800 # Thu Dec 10 09:33:26 2015 -0800 # Node ID 5041a82f811b692759ce75b4520ad34b553cc572 # Parent 95684405e6c32047c1d9e61a0e152cb198cbaf27 [ic7000]Digital Code Squelch for IC-7000 channels. Fixes bug #3047 Corrected reading of DCS from memory. Added writing of DCS to memory. Added reading and writing DCS polarity to memory. diff -r 95684405e6c3 -r 5041a82f811b chirp/drivers/icomciv.py --- a/chirp/drivers/icomciv.py Mon Nov 30 10:15:59 2015 -0800 +++ b/chirp/drivers/icomciv.py Thu Dec 10 09:33:26 2015 -0800 @@ -30,8 +30,8 @@ bbcd rtone[2]; u8 unknown5; bbcd ctone[2]; -u8 unknown6[2]; -bbcd dtcs; +u8 dtcs_polarity; +bbcd dtcs[2]; u8 unknown[17]; char name[9]; """ @@ -50,8 +50,8 @@ bbcd rtone[2]; u8 unknown5; bbcd ctone[2]; -u8 unknown6[2]; -bbcd dtcs; +u8 dtcs_polarity; +bbcd dtcs[2]; u8 unknown[11]; char name[9]; """ @@ -265,9 +265,18 @@ if self._rf.valid_tmodes: mem.tmode = self._rf.valid_tmodes[memobj.tmode] + if self._rf.has_dtcs_polarity: + if memobj.dtcs_polarity == 0x11: + mem.dtcs_polarity = "RR" + elif memobj.dtcs_polarity == 0x10: + mem.dtcs_polarity = "RN" + elif memobj.dtcs_polarity == 0x01: + mem.dtcs_polarity = "NR" + else: + mem.dtcs_polarity = "NN" + if self._rf.has_dtcs: - # FIXME - mem.dtcs = bitwise.bcd_to_int([memobj.dtcs]) + mem.dtcs = bitwise.bcd_to_int(memobj.dtcs) if "Tone" in self._rf.valid_tmodes: mem.rtone = int(memobj.rtone) / 10.0 @@ -308,6 +317,19 @@ memobj.ctone = int(mem.ctone * 10) memobj.rtone = int(mem.rtone * 10) + if self._rf.has_dtcs_polarity: + if mem.dtcs_polarity == "RR": + memobj.dtcs_polarity = 0x11 + elif mem.dtcs_polarity == "RN": + memobj.dtcs_polarity = 0x10 + elif mem.dtcs_polarity == "NR": + memobj.dtcs_polarity = 0x01 + else: + memobj.dtcs_polarity = 0x00 + + if self._rf.has_dtcs: + bitwise.int_to_bcd(memobj.dtcs, mem.dtcs) + LOG.debug(repr(memobj)) self._send_frame(f)

3 5

[chirp_devel] Build test results: Successful
by Build System 11 Dec '15

11 Dec '15

Tested changes: [<Joseph.P.Scanlan(a)n7xsd.us>] [IC-7000] Add WFM to the list of valid modes fixes #3051. [<Joseph.P.Scanlan(a)n7xsd.us>] [ic7000]Digital Code Squelch for IC-7000 channels. Fixes bug #3047 Corrected reading of DCS from memory. Added writing of DCS to memory. Added reading and writing DCS polarity to memory. Full log: Started by an SCM change Building in workspace /var/lib/jenkins/jobs/chirp-test/workspace [workspace] $ hg showconfig paths.default [workspace] $ hg pull --rev default [workspace] $ hg update --clean --rev default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved [workspace] $ hg log --rev . --template {node} [workspace] $ hg log --rev . --template {rev} [workspace] $ hg log --rev 95684405e6c32047c1d9e61a0e152cb198cbaf27 [workspace] $ hg log --template "<changeset node='{node}' author='{author|xmlescape}' rev='{rev}' date='{date}'><msg>{desc|xmlescape}</msg><added>{file_adds|stringify|xmlescape}</added><deleted>{file_dels|stringify|xmlescape}</deleted><files>{files|stringify|xmlescape}</files><parents>{parents}</parents></changeset>\n" --rev default:0 --follow --prune 95684405e6c32047c1d9e61a0e152cb198cbaf27 No emails were triggered. [workspace] $ /bin/sh -xe /tmp/hudson1489492090704695324.sh + cd tests + ./run_tests + cat /var/lib/jenkins/.chirp/debug.log [2015-12-11 10:45:13,496] chirp.logger - DEBUG: CHIRP 0.3.0dev on Linux - Ubuntu 14.04.3 LTS (Python 2.7.6) [2015-12-11 10:45:13,497] chirp.logger - DEBUG: verbosity=50 Alinco DJ175 Detect PASSED: All tests Alinco DJ175 Settings SKIPPED: Settings not supported Alinco DJ175 Clone PASSED: All tests Alinco DJ175 Edges PASSED: All tests Alinco DJ175 BruteForce PASSED: All tests Alinco DJ175 CopyAll PASSED: All tests Alinco DJ175 Banks SKIPPED: Banks not supported Alinco DJ596 Detect PASSED: All tests Alinco DJ596 Settings SKIPPED: Settings not supported Alinco DJ596 Clone PASSED: All tests Alinco DJ596 Edges PASSED: All tests Alinco DJ596 BruteForce PASSED: All tests Alinco DJ596 CopyAll PASSED: All tests Alinco DJ596 Banks SKIPPED: Banks not supported Alinco DR235T Detect PASSED: All tests Alinco DR235T Settings SKIPPED: Settings not supported Alinco DR235T Clone PASSED: All tests Alinco DR235T Edges PASSED: All tests Alinco DR235T BruteForce PASSED: All tests Alinco DR235T CopyAll PASSED: All tests Alinco DR235T Banks SKIPPED: Banks not supported AnyTone OBLTR-8R Detect PASSED: All tests AnyTone OBLTR-8R Settings PASSED: All tests AnyTone OBLTR-8R Clone PASSED: All tests AnyTone OBLTR-8R Edges PASSED: All tests AnyTone OBLTR-8R BruteForce PASSED: All tests AnyTone OBLTR-8R CopyAll PASSED: All tests AnyTone OBLTR-8R Banks SKIPPED: Banks not supported AnyTone TERMN-8R Detect PASSED: All tests AnyTone TERMN-8R Settings PASSED: All tests AnyTone TERMN-8R Clone PASSED: All tests AnyTone TERMN-8R Edges PASSED: All tests AnyTone TERMN-8R BruteForce PASSED: All tests AnyTone TERMN-8R CopyAll PASSED: All tests AnyTone TERMN-8R Banks SKIPPED: Banks not supported Baofeng BF-888 Detect PASSED: All tests Baofeng BF-888 Settings PASSED: All tests Baofeng BF-888 Clone PASSED: All tests Baofeng BF-888 Edges PASSED: All tests Baofeng BF-888 BruteForce PASSED: All tests Baofeng BF-888 CopyAll PASSED: All tests Baofeng BF-888 Banks SKIPPED: Banks not supported Baofeng F-11 Detect PASSED: All tests Baofeng F-11 Settings PASSED: All tests Baofeng F-11 Clone PASSED: All tests Baofeng F-11 Edges PASSED: All tests Baofeng F-11 BruteForce PASSED: All tests Baofeng F-11 CopyAll PASSED: All tests Baofeng F-11 Banks SKIPPED: Banks not supported Baofeng UV-3R Detect PASSED: All tests Baofeng UV-3R Settings PASSED: All tests Baofeng UV-3R Clone PASSED: All tests Baofeng UV-3R Edges PASSED: All tests Baofeng UV-3R BruteForce PASSED: All tests Baofeng UV-3R CopyAll PASSED: All tests Baofeng UV-3R Banks SKIPPED: Banks not supported Baofeng UV-5R Detect PASSED: All tests Baofeng UV-5R Settings PASSED: All tests Baofeng UV-5R Clone PASSED: All tests Baofeng UV-5R Edges PASSED: All tests Baofeng UV-5R BruteForce PASSED: All tests Baofeng UV-5R CopyAll PASSED: All tests Baofeng UV-5R Banks SKIPPED: Banks not supported Baofeng UV-B5 Detect PASSED: All tests Baofeng UV-B5 Settings PASSED: All tests Baofeng UV-B5 Clone PASSED: All tests Baofeng UV-B5 Edges PASSED: All tests Baofeng UV-B5 BruteForce PASSED: All tests Baofeng UV-B5 CopyAll PASSED: All tests Baofeng UV-B5 Banks SKIPPED: Banks not supported Baojie BJ-9900 Left Detect PASSED: All tests Baojie BJ-9900 Left Settings SKIPPED: Settings not supported Baojie BJ-9900 Left Clone PASSED: All tests Baojie BJ-9900 Left Edges PASSED: All tests Baojie BJ-9900 Left BruteForce PASSED: All tests Baojie BJ-9900 Left CopyAll PASSED: All tests Baojie BJ-9900 Left Banks SKIPPED: Banks not supported Baojie BJ-9900 Right Detect PASSED: All tests Baojie BJ-9900 Right Settings SKIPPED: Settings not supported Baojie BJ-9900 Right Clone PASSED: All tests Baojie BJ-9900 Right Edges PASSED: All tests Baojie BJ-9900 Right BruteForce PASSED: All tests Baojie BJ-9900 Right CopyAll PASSED: All tests Baojie BJ-9900 Right Banks SKIPPED: Banks not supported Feidaxin FD-268A Detect PASSED: All tests Feidaxin FD-268A Settings PASSED: All tests Feidaxin FD-268A Clone PASSED: All tests Feidaxin FD-268A Edges PASSED: All tests Feidaxin FD-268A BruteForce PASSED: All tests Feidaxin FD-268A CopyAll PASSED: All tests Feidaxin FD-268A Banks SKIPPED: Banks not supported Feidaxin FD-268B Detect PASSED: All tests Feidaxin FD-268B Settings PASSED: All tests Feidaxin FD-268B Clone PASSED: All tests Feidaxin FD-268B Edges PASSED: All tests Feidaxin FD-268B BruteForce PASSED: All tests Feidaxin FD-268B CopyAll PASSED: All tests Feidaxin FD-268B Banks SKIPPED: Banks not supported Feidaxin FD-288B Detect PASSED: All tests Feidaxin FD-288B Settings PASSED: All tests Feidaxin FD-288B Clone PASSED: All tests Feidaxin FD-288B Edges PASSED: All tests Feidaxin FD-288B BruteForce PASSED: All tests Feidaxin FD-288B CopyAll PASSED: All tests Feidaxin FD-288B Banks SKIPPED: Banks not supported Icom IC-208H Detect PASSED: All tests Icom IC-208H Settings SKIPPED: Settings not supported Icom IC-208H Clone PASSED: All tests Icom IC-208H Edges PASSED: All tests Icom IC-208H BruteForce PASSED: All tests Icom IC-208H CopyAll PASSED: All tests Icom IC-208H Banks PASSED: All tests Icom IC-2100H Detect PASSED: All tests Icom IC-2100H Settings SKIPPED: Settings not supported Icom IC-2100H Clone PASSED: All tests Icom IC-2100H Edges PASSED: All tests Icom IC-2100H BruteForce PASSED: All tests Icom IC-2100H CopyAll PASSED: All tests Icom IC-2100H Banks SKIPPED: Banks not supported Icom IC-2200H Detect PASSED: All tests Icom IC-2200H Settings PASSED: All tests Icom IC-2200H Clone PASSED: All tests Icom IC-2200H Edges PASSED: All tests Icom IC-2200H BruteForce PASSED: All tests Icom IC-2200H CopyAll PASSED: All tests Icom IC-2200H Banks PASSED: All tests Icom IC-2720H Detect PASSED: All tests Icom IC-2720H Settings SKIPPED: Settings not supported Icom IC-2720H Clone PASSED: All tests Icom IC-2720H Edges PASSED: All tests Icom IC-2720H BruteForce PASSED: All tests Icom IC-2720H CopyAll PASSED: All tests Icom IC-2720H Banks PASSED: All tests Icom IC-2820H Detect PASSED: All tests Icom IC-2820H Settings PASSED: All tests Icom IC-2820H Clone PASSED: All tests Icom IC-2820H Edges PASSED: All tests Icom IC-2820H BruteForce PASSED: All tests Icom IC-2820H CopyAll PASSED: All tests Icom IC-2820H Banks PASSED: All tests Icom IC-Q7A Detect PASSED: All tests Icom IC-Q7A Settings PASSED: All tests Icom IC-Q7A Clone PASSED: All tests Icom IC-Q7A Edges PASSED: All tests Icom IC-Q7A BruteForce PASSED: All tests Icom IC-Q7A CopyAll PASSED: All tests Icom IC-Q7A Banks SKIPPED: Banks not supported Icom IC-T70 Detect PASSED: All tests Icom IC-T70 Settings SKIPPED: Settings not supported Icom IC-T70 Clone PASSED: All tests Icom IC-T70 Edges PASSED: All tests Icom IC-T70 BruteForce PASSED: All tests Icom IC-T70 CopyAll PASSED: All tests Icom IC-T70 Banks PASSED: All tests Icom IC-T7H Detect PASSED: All tests Icom IC-T7H Settings SKIPPED: Settings not supported Icom IC-T7H Clone PASSED: All tests Icom IC-T7H Edges PASSED: All tests Icom IC-T7H BruteForce PASSED: All tests Icom IC-T7H CopyAll PASSED: All tests Icom IC-T7H Banks SKIPPED: Banks not supported Icom IC-T8A Detect PASSED: All tests Icom IC-T8A Settings SKIPPED: Settings not supported Icom IC-T8A Clone PASSED: All tests Icom IC-T8A Edges PASSED: All tests Icom IC-T8A BruteForce PASSED: All tests Icom IC-T8A CopyAll PASSED: All tests Icom IC-T8A Banks SKIPPED: Banks not supported Icom IC-V82/U82 Detect PASSED: All tests Icom IC-V82/U82 Settings SKIPPED: Settings not supported Icom IC-V82/U82 Clone PASSED: All tests Icom IC-V82/U82 Edges PASSED: All tests Icom IC-V82/U82 BruteForce PASSED: All tests Icom IC-V82/U82 CopyAll PASSED: All tests Icom IC-V82/U82 Banks PASSED: All tests Icom IC-W32A VHF Detect PASSED: All tests Icom IC-W32A VHF Settings SKIPPED: Settings not supported Icom IC-W32A VHF Clone PASSED: All tests Icom IC-W32A VHF Edges PASSED: All tests Icom IC-W32A VHF BruteForce PASSED: All tests Icom IC-W32A VHF CopyAll PASSED: All tests Icom IC-W32A VHF Banks SKIPPED: Banks not supported Icom IC-W32A UHF Detect PASSED: All tests Icom IC-W32A UHF Settings SKIPPED: Settings not supported Icom IC-W32A UHF Clone PASSED: All tests Icom IC-W32A UHF Edges PASSED: All tests Icom IC-W32A UHF BruteForce PASSED: All tests Icom IC-W32A UHF CopyAll PASSED: All tests Icom IC-W32A UHF Banks SKIPPED: Banks not supported Icom ID-31A Detect PASSED: All tests Icom ID-31A Settings PASSED: All tests Icom ID-31A Clone PASSED: All tests Icom ID-31A Edges PASSED: All tests Icom ID-31A BruteForce PASSED: All tests Icom ID-31A CopyAll PASSED: All tests Icom ID-31A Banks PASSED: All tests Icom ID-51 Detect PASSED: All tests Icom ID-51 Settings PASSED: All tests Icom ID-51 Clone PASSED: All tests Icom ID-51 Edges PASSED: All tests Icom ID-51 BruteForce PASSED: All tests Icom ID-51 CopyAll PASSED: All tests Icom ID-51 Banks PASSED: All tests Icom ID-51 Plus Detect PASSED: All tests Icom ID-51 Plus Settings PASSED: All tests Icom ID-51 Plus Clone PASSED: All tests Icom ID-51 Plus Edges PASSED: All tests Icom ID-51 Plus BruteForce PASSED: All tests Icom ID-51 Plus CopyAll PASSED: All tests Icom ID-51 Plus Banks PASSED: All tests Icom ID-800H v2 Detect PASSED: All tests Icom ID-800H v2 Settings PASSED: All tests Icom ID-800H v2 Clone PASSED: All tests Icom ID-800H v2 Edges PASSED: All tests Icom ID-800H v2 BruteForce PASSED: All tests Icom ID-800H v2 CopyAll PASSED: All tests Icom ID-800H v2 Banks PASSED: All tests Icom ID-880H Detect PASSED: All tests Icom ID-880H Settings PASSED: All tests Icom ID-880H Clone PASSED: All tests Icom ID-880H Edges PASSED: All tests Icom ID-880H BruteForce PASSED: All tests Icom ID-880H CopyAll PASSED: All tests Icom ID-880H Banks PASSED: All tests Jetstream JT220M Detect PASSED: All tests Jetstream JT220M Settings SKIPPED: Settings not supported Jetstream JT220M Clone PASSED: All tests Jetstream JT220M Edges PASSED: All tests Jetstream JT220M BruteForce PASSED: All tests Jetstream JT220M CopyAll PASSED: All tests Jetstream JT220M Banks SKIPPED: Banks not supported Jetstream JT270M Detect PASSED: All tests Jetstream JT270M Settings PASSED: All tests Jetstream JT270M Clone PASSED: All tests Jetstream JT270M Edges PASSED: All tests Jetstream JT270M BruteForce PASSED: All tests Jetstream JT270M CopyAll PASSED: All tests Jetstream JT270M Banks SKIPPED: Banks not supported KYD IP-620 Detect PASSED: All tests KYD IP-620 Settings PASSED: All tests KYD IP-620 Clone PASSED: All tests KYD IP-620 Edges PASSED: All tests KYD IP-620 BruteForce PASSED: All tests KYD IP-620 CopyAll PASSED: All tests KYD IP-620 Banks SKIPPED: Banks not supported Kenwood TH-D72 (clone Detect PASSED: All tests Kenwood TH-D72 (clone Settings SKIPPED: Settings not supported Kenwood TH-D72 (clone Clone PASSED: All tests Kenwood TH-D72 (clone Edges PASSED: All tests Kenwood TH-D72 (clone BruteForce PASSED: All tests Kenwood TH-D72 (clone CopyAll PASSED: All tests Kenwood TH-D72 (clone Banks SKIPPED: Banks not supported Kenwood TK-8102 Detect PASSED: All tests Kenwood TK-8102 Settings PASSED: All tests Kenwood TK-8102 Clone PASSED: All tests Kenwood TK-8102 Edges PASSED: All tests Kenwood TK-8102 BruteForce PASSED: All tests Kenwood TK-8102 CopyAll PASSED: All tests Kenwood TK-8102 Banks SKIPPED: Banks not supported Leixen VV-898 Detect PASSED: All tests Leixen VV-898 Settings PASSED: All tests Leixen VV-898 Clone PASSED: All tests Leixen VV-898 Edges PASSED: All tests Leixen VV-898 BruteForce PASSED: All tests Leixen VV-898 CopyAll PASSED: All tests Leixen VV-898 Banks SKIPPED: Banks not supported Polmar DB-50M Detect PASSED: All tests Polmar DB-50M Settings PASSED: All tests Polmar DB-50M Clone PASSED: All tests Polmar DB-50M Edges PASSED: All tests Polmar DB-50M BruteForce PASSED: All tests Polmar DB-50M CopyAll PASSED: All tests Polmar DB-50M Banks SKIPPED: Banks not supported Puxing PX-2R Detect PASSED: All tests Puxing PX-2R Settings SKIPPED: Settings not supported Puxing PX-2R Clone PASSED: All tests Puxing PX-2R Edges PASSED: All tests Puxing PX-2R BruteForce PASSED: All tests Puxing PX-2R CopyAll PASSED: All tests Puxing PX-2R Banks SKIPPED: Banks not supported Puxing PX-777 Detect PASSED: All tests Puxing PX-777 Settings SKIPPED: Settings not supported Puxing PX-777 Clone PASSED: All tests Puxing PX-777 Edges PASSED: All tests Puxing PX-777 BruteForce PASSED: All tests Puxing PX-777 CopyAll PASSED: All tests Puxing PX-777 Banks SKIPPED: Banks not supported Sainsonic AP510 Detect PASSED: All tests Sainsonic AP510 Settings PASSED: All tests Sainsonic AP510 Clone PASSED: All tests Sainsonic AP510 Edges PASSED: All tests Sainsonic AP510 BruteForce PASSED: All tests Sainsonic AP510 CopyAll PASSED: All tests Sainsonic AP510 Banks SKIPPED: Banks not supported TYT TH-9800 Detect PASSED: All tests TYT TH-9800 Settings PASSED: All tests TYT TH-9800 Clone PASSED: All tests TYT TH-9800 Edges PASSED: All tests TYT TH-9800 BruteForce PASSED: All tests TYT TH-9800 CopyAll PASSED: All tests TYT TH-9800 Banks SKIPPED: Banks not supported TYT TH-UV3R Detect PASSED: All tests TYT TH-UV3R Settings SKIPPED: Settings not supported TYT TH-UV3R Clone PASSED: All tests TYT TH-UV3R Edges PASSED: All tests TYT TH-UV3R BruteForce PASSED: All tests TYT TH-UV3R CopyAll PASSED: All tests TYT TH-UV3R Banks SKIPPED: Banks not supported TYT TH-UV3R-25 Detect PASSED: All tests TYT TH-UV3R-25 Settings SKIPPED: Settings not supported TYT TH-UV3R-25 Clone PASSED: All tests TYT TH-UV3R-25 Edges PASSED: All tests TYT TH-UV3R-25 BruteForce PASSED: All tests TYT TH-UV3R-25 CopyAll PASSED: All tests TYT TH-UV3R-25 Banks SKIPPED: Banks not supported TYT TH-UVF1 Detect PASSED: All tests TYT TH-UVF1 Settings PASSED: All tests TYT TH-UVF1 Clone PASSED: All tests TYT TH-UVF1 Edges PASSED: All tests TYT TH-UVF1 BruteForce PASSED: All tests TYT TH-UVF1 CopyAll PASSED: All tests TYT TH-UVF1 Banks SKIPPED: Banks not supported TYT TH9000_144 Detect PASSED: All tests TYT TH9000_144 Settings PASSED: All tests TYT TH9000_144 Clone PASSED: All tests TYT TH9000_144 Edges PASSED: All tests TYT TH9000_144 BruteForce PASSED: All tests TYT TH9000_144 CopyAll PASSED: All tests TYT TH9000_144 Banks SKIPPED: Banks not supported Vertex VXA-700 Detect PASSED: All tests Vertex VXA-700 Settings SKIPPED: Settings not supported Vertex VXA-700 Clone PASSED: All tests Vertex VXA-700 Edges PASSED: All tests Vertex VXA-700 BruteForce PASSED: All tests Vertex VXA-700 CopyAll PASSED: All tests Vertex VXA-700 Banks SKIPPED: Banks not supported Wouxun KG-816 Detect PASSED: All tests Wouxun KG-816 Settings PASSED: All tests Wouxun KG-816 Clone PASSED: All tests Wouxun KG-816 Edges PASSED: All tests Wouxun KG-816 BruteForce PASSED: All tests Wouxun KG-816 CopyAll PASSED: All tests Wouxun KG-816 Banks SKIPPED: Banks not supported Wouxun KG-818 Detect PASSED: All tests Wouxun KG-818 Settings PASSED: All tests Wouxun KG-818 Clone PASSED: All tests Wouxun KG-818 Edges PASSED: All tests Wouxun KG-818 BruteForce PASSED: All tests Wouxun KG-818 CopyAll PASSED: All tests Wouxun KG-818 Banks SKIPPED: Banks not supported Wouxun KG-UV6 Detect PASSED: All tests Wouxun KG-UV6 Settings PASSED: All tests Wouxun KG-UV6 Clone PASSED: All tests Wouxun KG-UV6 Edges PASSED: All tests Wouxun KG-UV6 BruteForce PASSED: All tests Wouxun KG-UV6 CopyAll PASSED: All tests Wouxun KG-UV6 Banks SKIPPED: Banks not supported Wouxun KG-UV8D Detect PASSED: All tests Wouxun KG-UV8D Settings PASSED: All tests Wouxun KG-UV8D Clone PASSED: All tests Wouxun KG-UV8D Edges PASSED: All tests Wouxun KG-UV8D BruteForce PASSED: All tests Wouxun KG-UV8D CopyAll PASSED: All tests Wouxun KG-UV8D Banks SKIPPED: Banks not supported Wouxun KG-UVD1P Detect PASSED: All tests Wouxun KG-UVD1P Settings PASSED: All tests Wouxun KG-UVD1P Clone PASSED: All tests Wouxun KG-UVD1P Edges PASSED: All tests Wouxun KG-UVD1P BruteForce PASSED: All tests Wouxun KG-UVD1P CopyAll PASSED: All tests Wouxun KG-UVD1P Banks SKIPPED: Banks not supported Yaesu FT-1802M Detect PASSED: All tests Yaesu FT-1802M Settings SKIPPED: Settings not supported Yaesu FT-1802M Clone PASSED: All tests Yaesu FT-1802M Edges PASSED: All tests Yaesu FT-1802M BruteForce PASSED: All tests Yaesu FT-1802M CopyAll PASSED: All tests Yaesu FT-1802M Banks SKIPPED: Banks not supported Yaesu FT-1D R Detect PASSED: All tests Yaesu FT-1D R Settings PASSED: All tests Yaesu FT-1D R Clone PASSED: All tests Yaesu FT-1D R Edges PASSED: All tests Yaesu FT-1D R BruteForce PASSED: All tests Yaesu FT-1D R CopyAll PASSED: All tests Yaesu FT-1D R Banks PASSED: All tests Yaesu FT-2800M Detect PASSED: All tests Yaesu FT-2800M Settings SKIPPED: Settings not supported Yaesu FT-2800M Clone PASSED: All tests Yaesu FT-2800M Edges PASSED: All tests Yaesu FT-2800M BruteForce PASSED: All tests Yaesu FT-2800M CopyAll PASSED: All tests Yaesu FT-2800M Banks SKIPPED: Banks not supported Yaesu FT-2900R/1900 Detect PASSED: All tests Yaesu FT-2900R/1900 Settings SKIPPED: Settings not supported Yaesu FT-2900R/1900 Clone PASSED: All tests Yaesu FT-2900R/1900 Edges PASSED: All tests Yaesu FT-2900R/1900 BruteForce PASSED: All tests Yaesu FT-2900R/1900 CopyAll PASSED: All tests Yaesu FT-2900R/1900 Banks PASSED: All tests Yaesu FT-60 Detect PASSED: All tests Yaesu FT-60 Settings PASSED: All tests Yaesu FT-60 Clone PASSED: All tests Yaesu FT-60 Edges PASSED: All tests Yaesu FT-60 BruteForce PASSED: All tests Yaesu FT-60 CopyAll PASSED: All tests Yaesu FT-60 Banks PASSED: All tests Yaesu FT-7800/7900 Detect PASSED: All tests Yaesu FT-7800/7900 Settings PASSED: All tests Yaesu FT-7800/7900 Clone PASSED: All tests Yaesu FT-7800/7900 Edges PASSED: All tests Yaesu FT-7800/7900 BruteForce PASSED: All tests Yaesu FT-7800/7900 CopyAll PASSED: All tests Yaesu FT-7800/7900 Banks PASSED: All tests Yaesu FT-817 Detect PASSED: All tests Yaesu FT-817 Settings PASSED: All tests Yaesu FT-817 Clone PASSED: All tests Yaesu FT-817 Edges PASSED: All tests Yaesu FT-817 BruteForce PASSED: All tests Yaesu FT-817 CopyAll PASSED: All tests Yaesu FT-817 Banks SKIPPED: Banks not supported Yaesu FT-817ND Detect PASSED: All tests Yaesu FT-817ND Settings PASSED: All tests Yaesu FT-817ND Clone PASSED: All tests Yaesu FT-817ND Edges PASSED: All tests Yaesu FT-817ND BruteForce PASSED: All tests Yaesu FT-817ND CopyAll PASSED: All tests Yaesu FT-817ND Banks SKIPPED: Banks not supported Yaesu FT-817ND (US) Detect PASSED: All tests Yaesu FT-817ND (US) Settings PASSED: All tests Yaesu FT-817ND (US) Clone PASSED: All tests Yaesu FT-817ND (US) Edges PASSED: All tests Yaesu FT-817ND (US) BruteForce PASSED: All tests Yaesu FT-817ND (US) CopyAll PASSED: All tests Yaesu FT-817ND (US) Banks SKIPPED: Banks not supported Yaesu FT-857/897 Detect PASSED: All tests Yaesu FT-857/897 Settings PASSED: All tests Yaesu FT-857/897 Clone PASSED: All tests Yaesu FT-857/897 Edges PASSED: All tests Yaesu FT-857/897 BruteForce PASSED: All tests Yaesu FT-857/897 CopyAll PASSED: All tests Yaesu FT-857/897 Banks SKIPPED: Banks not supported Yaesu FT-857/897 (U Detect PASSED: All tests Yaesu FT-857/897 (U Settings PASSED: All tests Yaesu FT-857/897 (U Clone PASSED: All tests Yaesu FT-857/897 (U Edges PASSED: All tests Yaesu FT-857/897 (U BruteForce PASSED: All tests Yaesu FT-857/897 (U CopyAll PASSED: All tests Yaesu FT-857/897 (U Banks SKIPPED: Banks not supported Yaesu FT-8800 Left Detect PASSED: All tests Yaesu FT-8800 Left Settings SKIPPED: Settings not supported Yaesu FT-8800 Left Clone PASSED: All tests Yaesu FT-8800 Left Edges PASSED: All tests Yaesu FT-8800 Left BruteForce PASSED: All tests Yaesu FT-8800 Left CopyAll PASSED: All tests Yaesu FT-8800 Left Banks PASSED: All tests Yaesu FT-8800 Right Detect PASSED: All tests Yaesu FT-8800 Right Settings SKIPPED: Settings not supported Yaesu FT-8800 Right Clone PASSED: All tests Yaesu FT-8800 Right Edges PASSED: All tests Yaesu FT-8800 Right BruteForce PASSED: All tests Yaesu FT-8800 Right CopyAll PASSED: All tests Yaesu FT-8800 Right Banks PASSED: All tests Yaesu FT-8900 Detect PASSED: All tests Yaesu FT-8900 Settings SKIPPED: Settings not supported Yaesu FT-8900 Clone PASSED: All tests Yaesu FT-8900 Edges PASSED: All tests Yaesu FT-8900 BruteForce PASSED: All tests Yaesu FT-8900 CopyAll PASSED: All tests Yaesu FT-8900 Banks SKIPPED: Banks not supported Yaesu FTM-350 Left Detect PASSED: All tests Yaesu FTM-350 Left Settings PASSED: All tests Yaesu FTM-350 Left Clone PASSED: All tests Yaesu FTM-350 Left Edges PASSED: All tests Yaesu FTM-350 Left BruteForce PASSED: All tests Yaesu FTM-350 Left CopyAll PASSED: All tests Yaesu FTM-350 Left Banks SKIPPED: Banks not supported Yaesu FTM-350 Right Detect PASSED: All tests Yaesu FTM-350 Right Settings SKIPPED: Settings not supported Yaesu FTM-350 Right Clone PASSED: All tests Yaesu FTM-350 Right Edges PASSED: All tests Yaesu FTM-350 Right BruteForce PASSED: All tests Yaesu FTM-350 Right CopyAll PASSED: All tests Yaesu FTM-350 Right Banks SKIPPED: Banks not supported Yaesu VX-2 Detect PASSED: All tests Yaesu VX-2 Settings PASSED: All tests Yaesu VX-2 Clone PASSED: All tests Yaesu VX-2 Edges PASSED: All tests Yaesu VX-2 BruteForce PASSED: All tests Yaesu VX-2 CopyAll PASSED: All tests Yaesu VX-2 Banks PASSED: All tests Yaesu VX-3 Detect PASSED: All tests Yaesu VX-3 Settings PASSED: All tests Yaesu VX-3 Clone PASSED: All tests Yaesu VX-3 Edges PASSED: All tests Yaesu VX-3 BruteForce PASSED: All tests Yaesu VX-3 CopyAll PASSED: All tests Yaesu VX-3 Banks PASSED: All tests Yaesu VX-5 Detect PASSED: All tests Yaesu VX-5 Settings SKIPPED: Settings not supported Yaesu VX-5 Clone PASSED: All tests Yaesu VX-5 Edges PASSED: All tests Yaesu VX-5 BruteForce PASSED: All tests Yaesu VX-5 CopyAll PASSED: All tests Yaesu VX-5 Banks PASSED: All tests Yaesu VX-6 Detect PASSED: All tests Yaesu VX-6 Settings SKIPPED: Settings not supported Yaesu VX-6 Clone PASSED: All tests Yaesu VX-6 Edges PASSED: All tests Yaesu VX-6 BruteForce PASSED: All tests Yaesu VX-6 CopyAll PASSED: All tests Yaesu VX-6 Banks PASSED: All tests Yaesu VX-7 Detect PASSED: All tests Yaesu VX-7 Settings SKIPPED: Settings not supported Yaesu VX-7 Clone PASSED: All tests Yaesu VX-7 Edges PASSED: All tests Yaesu VX-7 BruteForce PASSED: All tests Yaesu VX-7 CopyAll PASSED: All tests Yaesu VX-7 Banks PASSED: All tests Yaesu VX-8 R Detect PASSED: All tests Yaesu VX-8 R Settings SKIPPED: Settings not supported Yaesu VX-8 R Clone PASSED: All tests Yaesu VX-8 R Edges PASSED: All tests Yaesu VX-8 R BruteForce PASSED: All tests Yaesu VX-8 R CopyAll PASSED: All tests Yaesu VX-8 R Banks PASSED: All tests ---------------------------------------------------------------------- Results: TOTAL : 525 FAILED : 0 SKIPPED: 84 PASSED : 441 CRASHED: 0 [workspace] $ /bin/sh -xe /tmp/hudson3453245799334994901.sh + PATH=/usr/bin:/bin:/usr/local/bin ./run_all_tests.sh test_bit_array (tests.unit.test_bitwise.TestBitType) ... ok test_bit_array_fail (tests.unit.test_bitwise.TestBitType) ... ok test_bitfield_u16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_u24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_u8 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_ul16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_ul24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_bbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_lbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_lbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_int_array (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u8 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_char (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string_invalid_chars (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string_wrong_length (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_comment_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok test_comment_inline_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok test_missing_semicolon (tests.unit.test_bitwise.TestBitwiseErrors) ... ok test_seek (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_seekto (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_struct_one_element (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_two_elements (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_writes (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok split_tone_encode_test_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_none (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_none (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_fix_rounded_step_250 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_500 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_750 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_12_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_2_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_5_0 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_6_25 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_fractional_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step_fail (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_format_freq (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_bad (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_decimal (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whitespace (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whole (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_ensure_has_calls_almost_full (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_empty (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_partial (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full1 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full2 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_urcall_full (tests.unit.test_import_logic.DstarTests) ... ok test_import_bank (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffA_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffB_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_negative (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_too_big_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_uhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_errors (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_warnings (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_invalid (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_am (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_fm (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_name (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_closest (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_dst (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_src (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_same (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffA_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffB_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModelIndexInterface) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_icom_bank (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_index_bounds (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_next_mapping_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_auto_tone_mode_cross (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_pol (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_rx (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tone (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tsql (tests.unit.test_memedit_edits.TestEdits) ... ok test_init (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_bad_portnames (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_sorted (tests.unit.test_platform.Win32PlatformTest) ... ok test_apply_callback (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_group (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_multi (tests.unit.test_settings.TestSettingContainers) ... ok test_changed (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_boolean (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_float (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_integer (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_list (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_string (tests.unit.test_settings.TestSettingValues) ... ok test_validate_callback (tests.unit.test_settings.TestSettingValues) ... ok test_delete_hole_with_all (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_all_full (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_without_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_with_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_without_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok ---------------------------------------------------------------------- Ran 151 tests in 0.052s OK Patch 'tip' is OK Checking for PEP8 regressions... real 0m7.537s user 0m7.398s sys 0m0.067s ================================================ Tests OK Email was triggered for: Success Sending email for trigger: Success

1 0

[chirp_devel] [PATCH] [IC-7000] Add WFM to the list of valid modes fixes #3051
by Joseph.P.Scanlan＠n7xsd.us 11 Dec '15

11 Dec '15

# HG changeset patch # User <Joseph.P.Scanlan(a)n7xsd.us> # Date 1449854259 28800 # Fri Dec 11 09:17:39 2015 -0800 # Node ID a271f317235546d12f9a9c1b25ad22fc94d88c1a # Parent 5041a82f811b692759ce75b4520ad34b553cc572 [IC-7000] Add WFM to the list of valid modes fixes #3051. diff -r 5041a82f811b -r a271f3172355 chirp/drivers/icomciv.py --- a/chirp/drivers/icomciv.py Thu Dec 10 09:33:26 2015 -0800 +++ b/chirp/drivers/icomciv.py Fri Dec 11 09:17:39 2015 -0800 @@ -376,7 +376,7 @@ self._rf.has_offset = False self._rf.has_name = True self._rf.has_tuning_step = False - self._rf.valid_modes = ["LSB", "USB", "AM", "CW", "RTTY", "FM"] + self._rf.valid_modes = ["LSB", "USB", "AM", "CW", "RTTY", "FM", "WFM"] self._rf.valid_tmodes = ["", "Tone", "TSQL", "DTCS"] self._rf.valid_duplexes = ["", "-", "+"] self._rf.valid_bands = [(30000, 199999999), (400000000, 470000000)]

1 0

[chirp_devel] CHIRP for IC-7100 or TS-480
by Drew from Zhrodague 30 Nov '15

30 Nov '15

Hi, I'm a huge fan of CHIRP, and I'd like to help. I have both a TS-480, and an IC-7100. Both are not supported by CHIRP yet. The format for the TS-480 is similar to the TS-2000, as I understand it. I am not sure what to use as a template for the IC-7100 yet. Anyone working on these or similar devices that can clue me in?

2 1

[chirp_devel] Build test results: Successful
by Build System 30 Nov '15

30 Nov '15

Tested changes: [Dan Smith <dsmith(a)danplanet.com>] Add Ukranian translation from Sergiy Lagoda #3039 Full log: Started by an SCM change Building in workspace /var/lib/jenkins/jobs/chirp-test/workspace [workspace] $ hg showconfig paths.default [workspace] $ hg pull --rev default [workspace] $ hg update --clean --rev default 2 files updated, 0 files merged, 0 files removed, 0 files unresolved [workspace] $ hg log --rev . --template {node} [workspace] $ hg log --rev . --template {rev} [workspace] $ hg log --rev 41848323e6379e3ad1d71874d61d37bf6f35d80f [workspace] $ hg log --template "<changeset node='{node}' author='{author|xmlescape}' rev='{rev}' date='{date}'><msg>{desc|xmlescape}</msg><added>{file_adds|stringify|xmlescape}</added><deleted>{file_dels|stringify|xmlescape}</deleted><files>{files|stringify|xmlescape}</files><parents>{parents}</parents></changeset>\n" --rev default:0 --follow --prune 41848323e6379e3ad1d71874d61d37bf6f35d80f No emails were triggered. [workspace] $ /bin/sh -xe /tmp/hudson4951814446372920199.sh + cd tests + ./run_tests + cat /var/lib/jenkins/.chirp/debug.log [2015-11-30 10:20:10,554] chirp.logger - DEBUG: CHIRP 0.3.0dev on Linux - Ubuntu 14.04.3 LTS (Python 2.7.6) [2015-11-30 10:20:10,554] chirp.logger - DEBUG: verbosity=50 Alinco DJ175 Detect PASSED: All tests Alinco DJ175 Settings SKIPPED: Settings not supported Alinco DJ175 Clone PASSED: All tests Alinco DJ175 Edges PASSED: All tests Alinco DJ175 BruteForce PASSED: All tests Alinco DJ175 CopyAll PASSED: All tests Alinco DJ175 Banks SKIPPED: Banks not supported Alinco DJ596 Detect PASSED: All tests Alinco DJ596 Settings SKIPPED: Settings not supported Alinco DJ596 Clone PASSED: All tests Alinco DJ596 Edges PASSED: All tests Alinco DJ596 BruteForce PASSED: All tests Alinco DJ596 CopyAll PASSED: All tests Alinco DJ596 Banks SKIPPED: Banks not supported Alinco DR235T Detect PASSED: All tests Alinco DR235T Settings SKIPPED: Settings not supported Alinco DR235T Clone PASSED: All tests Alinco DR235T Edges PASSED: All tests Alinco DR235T BruteForce PASSED: All tests Alinco DR235T CopyAll PASSED: All tests Alinco DR235T Banks SKIPPED: Banks not supported AnyTone OBLTR-8R Detect PASSED: All tests AnyTone OBLTR-8R Settings PASSED: All tests AnyTone OBLTR-8R Clone PASSED: All tests AnyTone OBLTR-8R Edges PASSED: All tests AnyTone OBLTR-8R BruteForce PASSED: All tests AnyTone OBLTR-8R CopyAll PASSED: All tests AnyTone OBLTR-8R Banks SKIPPED: Banks not supported AnyTone TERMN-8R Detect PASSED: All tests AnyTone TERMN-8R Settings PASSED: All tests AnyTone TERMN-8R Clone PASSED: All tests AnyTone TERMN-8R Edges PASSED: All tests AnyTone TERMN-8R BruteForce PASSED: All tests AnyTone TERMN-8R CopyAll PASSED: All tests AnyTone TERMN-8R Banks SKIPPED: Banks not supported Baofeng BF-888 Detect PASSED: All tests Baofeng BF-888 Settings PASSED: All tests Baofeng BF-888 Clone PASSED: All tests Baofeng BF-888 Edges PASSED: All tests Baofeng BF-888 BruteForce PASSED: All tests Baofeng BF-888 CopyAll PASSED: All tests Baofeng BF-888 Banks SKIPPED: Banks not supported Baofeng F-11 Detect PASSED: All tests Baofeng F-11 Settings PASSED: All tests Baofeng F-11 Clone PASSED: All tests Baofeng F-11 Edges PASSED: All tests Baofeng F-11 BruteForce PASSED: All tests Baofeng F-11 CopyAll PASSED: All tests Baofeng F-11 Banks SKIPPED: Banks not supported Baofeng UV-3R Detect PASSED: All tests Baofeng UV-3R Settings PASSED: All tests Baofeng UV-3R Clone PASSED: All tests Baofeng UV-3R Edges PASSED: All tests Baofeng UV-3R BruteForce PASSED: All tests Baofeng UV-3R CopyAll PASSED: All tests Baofeng UV-3R Banks SKIPPED: Banks not supported Baofeng UV-5R Detect PASSED: All tests Baofeng UV-5R Settings PASSED: All tests Baofeng UV-5R Clone PASSED: All tests Baofeng UV-5R Edges PASSED: All tests Baofeng UV-5R BruteForce PASSED: All tests Baofeng UV-5R CopyAll PASSED: All tests Baofeng UV-5R Banks SKIPPED: Banks not supported Baofeng UV-B5 Detect PASSED: All tests Baofeng UV-B5 Settings PASSED: All tests Baofeng UV-B5 Clone PASSED: All tests Baofeng UV-B5 Edges PASSED: All tests Baofeng UV-B5 BruteForce PASSED: All tests Baofeng UV-B5 CopyAll PASSED: All tests Baofeng UV-B5 Banks SKIPPED: Banks not supported Baojie BJ-9900 Left Detect PASSED: All tests Baojie BJ-9900 Left Settings SKIPPED: Settings not supported Baojie BJ-9900 Left Clone PASSED: All tests Baojie BJ-9900 Left Edges PASSED: All tests Baojie BJ-9900 Left BruteForce PASSED: All tests Baojie BJ-9900 Left CopyAll PASSED: All tests Baojie BJ-9900 Left Banks SKIPPED: Banks not supported Baojie BJ-9900 Right Detect PASSED: All tests Baojie BJ-9900 Right Settings SKIPPED: Settings not supported Baojie BJ-9900 Right Clone PASSED: All tests Baojie BJ-9900 Right Edges PASSED: All tests Baojie BJ-9900 Right BruteForce PASSED: All tests Baojie BJ-9900 Right CopyAll PASSED: All tests Baojie BJ-9900 Right Banks SKIPPED: Banks not supported Feidaxin FD-268A Detect PASSED: All tests Feidaxin FD-268A Settings PASSED: All tests Feidaxin FD-268A Clone PASSED: All tests Feidaxin FD-268A Edges PASSED: All tests Feidaxin FD-268A BruteForce PASSED: All tests Feidaxin FD-268A CopyAll PASSED: All tests Feidaxin FD-268A Banks SKIPPED: Banks not supported Feidaxin FD-268B Detect PASSED: All tests Feidaxin FD-268B Settings PASSED: All tests Feidaxin FD-268B Clone PASSED: All tests Feidaxin FD-268B Edges PASSED: All tests Feidaxin FD-268B BruteForce PASSED: All tests Feidaxin FD-268B CopyAll PASSED: All tests Feidaxin FD-268B Banks SKIPPED: Banks not supported Feidaxin FD-288B Detect PASSED: All tests Feidaxin FD-288B Settings PASSED: All tests Feidaxin FD-288B Clone PASSED: All tests Feidaxin FD-288B Edges PASSED: All tests Feidaxin FD-288B BruteForce PASSED: All tests Feidaxin FD-288B CopyAll PASSED: All tests Feidaxin FD-288B Banks SKIPPED: Banks not supported Icom IC-208H Detect PASSED: All tests Icom IC-208H Settings SKIPPED: Settings not supported Icom IC-208H Clone PASSED: All tests Icom IC-208H Edges PASSED: All tests Icom IC-208H BruteForce PASSED: All tests Icom IC-208H CopyAll PASSED: All tests Icom IC-208H Banks PASSED: All tests Icom IC-2100H Detect PASSED: All tests Icom IC-2100H Settings SKIPPED: Settings not supported Icom IC-2100H Clone PASSED: All tests Icom IC-2100H Edges PASSED: All tests Icom IC-2100H BruteForce PASSED: All tests Icom IC-2100H CopyAll PASSED: All tests Icom IC-2100H Banks SKIPPED: Banks not supported Icom IC-2200H Detect PASSED: All tests Icom IC-2200H Settings PASSED: All tests Icom IC-2200H Clone PASSED: All tests Icom IC-2200H Edges PASSED: All tests Icom IC-2200H BruteForce PASSED: All tests Icom IC-2200H CopyAll PASSED: All tests Icom IC-2200H Banks PASSED: All tests Icom IC-2720H Detect PASSED: All tests Icom IC-2720H Settings SKIPPED: Settings not supported Icom IC-2720H Clone PASSED: All tests Icom IC-2720H Edges PASSED: All tests Icom IC-2720H BruteForce PASSED: All tests Icom IC-2720H CopyAll PASSED: All tests Icom IC-2720H Banks PASSED: All tests Icom IC-2820H Detect PASSED: All tests Icom IC-2820H Settings PASSED: All tests Icom IC-2820H Clone PASSED: All tests Icom IC-2820H Edges PASSED: All tests Icom IC-2820H BruteForce PASSED: All tests Icom IC-2820H CopyAll PASSED: All tests Icom IC-2820H Banks PASSED: All tests Icom IC-Q7A Detect PASSED: All tests Icom IC-Q7A Settings PASSED: All tests Icom IC-Q7A Clone PASSED: All tests Icom IC-Q7A Edges PASSED: All tests Icom IC-Q7A BruteForce PASSED: All tests Icom IC-Q7A CopyAll PASSED: All tests Icom IC-Q7A Banks SKIPPED: Banks not supported Icom IC-T70 Detect PASSED: All tests Icom IC-T70 Settings SKIPPED: Settings not supported Icom IC-T70 Clone PASSED: All tests Icom IC-T70 Edges PASSED: All tests Icom IC-T70 BruteForce PASSED: All tests Icom IC-T70 CopyAll PASSED: All tests Icom IC-T70 Banks PASSED: All tests Icom IC-T7H Detect PASSED: All tests Icom IC-T7H Settings SKIPPED: Settings not supported Icom IC-T7H Clone PASSED: All tests Icom IC-T7H Edges PASSED: All tests Icom IC-T7H BruteForce PASSED: All tests Icom IC-T7H CopyAll PASSED: All tests Icom IC-T7H Banks SKIPPED: Banks not supported Icom IC-T8A Detect PASSED: All tests Icom IC-T8A Settings SKIPPED: Settings not supported Icom IC-T8A Clone PASSED: All tests Icom IC-T8A Edges PASSED: All tests Icom IC-T8A BruteForce PASSED: All tests Icom IC-T8A CopyAll PASSED: All tests Icom IC-T8A Banks SKIPPED: Banks not supported Icom IC-V82/U82 Detect PASSED: All tests Icom IC-V82/U82 Settings SKIPPED: Settings not supported Icom IC-V82/U82 Clone PASSED: All tests Icom IC-V82/U82 Edges PASSED: All tests Icom IC-V82/U82 BruteForce PASSED: All tests Icom IC-V82/U82 CopyAll PASSED: All tests Icom IC-V82/U82 Banks PASSED: All tests Icom IC-W32A VHF Detect PASSED: All tests Icom IC-W32A VHF Settings SKIPPED: Settings not supported Icom IC-W32A VHF Clone PASSED: All tests Icom IC-W32A VHF Edges PASSED: All tests Icom IC-W32A VHF BruteForce PASSED: All tests Icom IC-W32A VHF CopyAll PASSED: All tests Icom IC-W32A VHF Banks SKIPPED: Banks not supported Icom IC-W32A UHF Detect PASSED: All tests Icom IC-W32A UHF Settings SKIPPED: Settings not supported Icom IC-W32A UHF Clone PASSED: All tests Icom IC-W32A UHF Edges PASSED: All tests Icom IC-W32A UHF BruteForce PASSED: All tests Icom IC-W32A UHF CopyAll PASSED: All tests Icom IC-W32A UHF Banks SKIPPED: Banks not supported Icom ID-31A Detect PASSED: All tests Icom ID-31A Settings PASSED: All tests Icom ID-31A Clone PASSED: All tests Icom ID-31A Edges PASSED: All tests Icom ID-31A BruteForce PASSED: All tests Icom ID-31A CopyAll PASSED: All tests Icom ID-31A Banks PASSED: All tests Icom ID-51 Detect PASSED: All tests Icom ID-51 Settings PASSED: All tests Icom ID-51 Clone PASSED: All tests Icom ID-51 Edges PASSED: All tests Icom ID-51 BruteForce PASSED: All tests Icom ID-51 CopyAll PASSED: All tests Icom ID-51 Banks PASSED: All tests Icom ID-51 Plus Detect PASSED: All tests Icom ID-51 Plus Settings PASSED: All tests Icom ID-51 Plus Clone PASSED: All tests Icom ID-51 Plus Edges PASSED: All tests Icom ID-51 Plus BruteForce PASSED: All tests Icom ID-51 Plus CopyAll PASSED: All tests Icom ID-51 Plus Banks PASSED: All tests Icom ID-800H v2 Detect PASSED: All tests Icom ID-800H v2 Settings PASSED: All tests Icom ID-800H v2 Clone PASSED: All tests Icom ID-800H v2 Edges PASSED: All tests Icom ID-800H v2 BruteForce PASSED: All tests Icom ID-800H v2 CopyAll PASSED: All tests Icom ID-800H v2 Banks PASSED: All tests Icom ID-880H Detect PASSED: All tests Icom ID-880H Settings PASSED: All tests Icom ID-880H Clone PASSED: All tests Icom ID-880H Edges PASSED: All tests Icom ID-880H BruteForce PASSED: All tests Icom ID-880H CopyAll PASSED: All tests Icom ID-880H Banks PASSED: All tests Jetstream JT220M Detect PASSED: All tests Jetstream JT220M Settings SKIPPED: Settings not supported Jetstream JT220M Clone PASSED: All tests Jetstream JT220M Edges PASSED: All tests Jetstream JT220M BruteForce PASSED: All tests Jetstream JT220M CopyAll PASSED: All tests Jetstream JT220M Banks SKIPPED: Banks not supported Jetstream JT270M Detect PASSED: All tests Jetstream JT270M Settings PASSED: All tests Jetstream JT270M Clone PASSED: All tests Jetstream JT270M Edges PASSED: All tests Jetstream JT270M BruteForce PASSED: All tests Jetstream JT270M CopyAll PASSED: All tests Jetstream JT270M Banks SKIPPED: Banks not supported KYD IP-620 Detect PASSED: All tests KYD IP-620 Settings PASSED: All tests KYD IP-620 Clone PASSED: All tests KYD IP-620 Edges PASSED: All tests KYD IP-620 BruteForce PASSED: All tests KYD IP-620 CopyAll PASSED: All tests KYD IP-620 Banks SKIPPED: Banks not supported Kenwood TH-D72 (clone Detect PASSED: All tests Kenwood TH-D72 (clone Settings SKIPPED: Settings not supported Kenwood TH-D72 (clone Clone PASSED: All tests Kenwood TH-D72 (clone Edges PASSED: All tests Kenwood TH-D72 (clone BruteForce PASSED: All tests Kenwood TH-D72 (clone CopyAll PASSED: All tests Kenwood TH-D72 (clone Banks SKIPPED: Banks not supported Kenwood TK-8102 Detect PASSED: All tests Kenwood TK-8102 Settings PASSED: All tests Kenwood TK-8102 Clone PASSED: All tests Kenwood TK-8102 Edges PASSED: All tests Kenwood TK-8102 BruteForce PASSED: All tests Kenwood TK-8102 CopyAll PASSED: All tests Kenwood TK-8102 Banks SKIPPED: Banks not supported Leixen VV-898 Detect PASSED: All tests Leixen VV-898 Settings PASSED: All tests Leixen VV-898 Clone PASSED: All tests Leixen VV-898 Edges PASSED: All tests Leixen VV-898 BruteForce PASSED: All tests Leixen VV-898 CopyAll PASSED: All tests Leixen VV-898 Banks SKIPPED: Banks not supported Polmar DB-50M Detect PASSED: All tests Polmar DB-50M Settings PASSED: All tests Polmar DB-50M Clone PASSED: All tests Polmar DB-50M Edges PASSED: All tests Polmar DB-50M BruteForce PASSED: All tests Polmar DB-50M CopyAll PASSED: All tests Polmar DB-50M Banks SKIPPED: Banks not supported Puxing PX-2R Detect PASSED: All tests Puxing PX-2R Settings SKIPPED: Settings not supported Puxing PX-2R Clone PASSED: All tests Puxing PX-2R Edges PASSED: All tests Puxing PX-2R BruteForce PASSED: All tests Puxing PX-2R CopyAll PASSED: All tests Puxing PX-2R Banks SKIPPED: Banks not supported Puxing PX-777 Detect PASSED: All tests Puxing PX-777 Settings SKIPPED: Settings not supported Puxing PX-777 Clone PASSED: All tests Puxing PX-777 Edges PASSED: All tests Puxing PX-777 BruteForce PASSED: All tests Puxing PX-777 CopyAll PASSED: All tests Puxing PX-777 Banks SKIPPED: Banks not supported Sainsonic AP510 Detect PASSED: All tests Sainsonic AP510 Settings PASSED: All tests Sainsonic AP510 Clone PASSED: All tests Sainsonic AP510 Edges PASSED: All tests Sainsonic AP510 BruteForce PASSED: All tests Sainsonic AP510 CopyAll PASSED: All tests Sainsonic AP510 Banks SKIPPED: Banks not supported TYT TH-9800 Detect PASSED: All tests TYT TH-9800 Settings PASSED: All tests TYT TH-9800 Clone PASSED: All tests TYT TH-9800 Edges PASSED: All tests TYT TH-9800 BruteForce PASSED: All tests TYT TH-9800 CopyAll PASSED: All tests TYT TH-9800 Banks SKIPPED: Banks not supported TYT TH-UV3R Detect PASSED: All tests TYT TH-UV3R Settings SKIPPED: Settings not supported TYT TH-UV3R Clone PASSED: All tests TYT TH-UV3R Edges PASSED: All tests TYT TH-UV3R BruteForce PASSED: All tests TYT TH-UV3R CopyAll PASSED: All tests TYT TH-UV3R Banks SKIPPED: Banks not supported TYT TH-UV3R-25 Detect PASSED: All tests TYT TH-UV3R-25 Settings SKIPPED: Settings not supported TYT TH-UV3R-25 Clone PASSED: All tests TYT TH-UV3R-25 Edges PASSED: All tests TYT TH-UV3R-25 BruteForce PASSED: All tests TYT TH-UV3R-25 CopyAll PASSED: All tests TYT TH-UV3R-25 Banks SKIPPED: Banks not supported TYT TH-UVF1 Detect PASSED: All tests TYT TH-UVF1 Settings PASSED: All tests TYT TH-UVF1 Clone PASSED: All tests TYT TH-UVF1 Edges PASSED: All tests TYT TH-UVF1 BruteForce PASSED: All tests TYT TH-UVF1 CopyAll PASSED: All tests TYT TH-UVF1 Banks SKIPPED: Banks not supported TYT TH9000_144 Detect PASSED: All tests TYT TH9000_144 Settings PASSED: All tests TYT TH9000_144 Clone PASSED: All tests TYT TH9000_144 Edges PASSED: All tests TYT TH9000_144 BruteForce PASSED: All tests TYT TH9000_144 CopyAll PASSED: All tests TYT TH9000_144 Banks SKIPPED: Banks not supported Vertex VXA-700 Detect PASSED: All tests Vertex VXA-700 Settings SKIPPED: Settings not supported Vertex VXA-700 Clone PASSED: All tests Vertex VXA-700 Edges PASSED: All tests Vertex VXA-700 BruteForce PASSED: All tests Vertex VXA-700 CopyAll PASSED: All tests Vertex VXA-700 Banks SKIPPED: Banks not supported Wouxun KG-816 Detect PASSED: All tests Wouxun KG-816 Settings PASSED: All tests Wouxun KG-816 Clone PASSED: All tests Wouxun KG-816 Edges PASSED: All tests Wouxun KG-816 BruteForce PASSED: All tests Wouxun KG-816 CopyAll PASSED: All tests Wouxun KG-816 Banks SKIPPED: Banks not supported Wouxun KG-818 Detect PASSED: All tests Wouxun KG-818 Settings PASSED: All tests Wouxun KG-818 Clone PASSED: All tests Wouxun KG-818 Edges PASSED: All tests Wouxun KG-818 BruteForce PASSED: All tests Wouxun KG-818 CopyAll PASSED: All tests Wouxun KG-818 Banks SKIPPED: Banks not supported Wouxun KG-UV6 Detect PASSED: All tests Wouxun KG-UV6 Settings PASSED: All tests Wouxun KG-UV6 Clone PASSED: All tests Wouxun KG-UV6 Edges PASSED: All tests Wouxun KG-UV6 BruteForce PASSED: All tests Wouxun KG-UV6 CopyAll PASSED: All tests Wouxun KG-UV6 Banks SKIPPED: Banks not supported Wouxun KG-UV8D Detect PASSED: All tests Wouxun KG-UV8D Settings PASSED: All tests Wouxun KG-UV8D Clone PASSED: All tests Wouxun KG-UV8D Edges PASSED: All tests Wouxun KG-UV8D BruteForce PASSED: All tests Wouxun KG-UV8D CopyAll PASSED: All tests Wouxun KG-UV8D Banks SKIPPED: Banks not supported Wouxun KG-UVD1P Detect PASSED: All tests Wouxun KG-UVD1P Settings PASSED: All tests Wouxun KG-UVD1P Clone PASSED: All tests Wouxun KG-UVD1P Edges PASSED: All tests Wouxun KG-UVD1P BruteForce PASSED: All tests Wouxun KG-UVD1P CopyAll PASSED: All tests Wouxun KG-UVD1P Banks SKIPPED: Banks not supported Yaesu FT-1802M Detect PASSED: All tests Yaesu FT-1802M Settings SKIPPED: Settings not supported Yaesu FT-1802M Clone PASSED: All tests Yaesu FT-1802M Edges PASSED: All tests Yaesu FT-1802M BruteForce PASSED: All tests Yaesu FT-1802M CopyAll PASSED: All tests Yaesu FT-1802M Banks SKIPPED: Banks not supported Yaesu FT-1D R Detect PASSED: All tests Yaesu FT-1D R Settings PASSED: All tests Yaesu FT-1D R Clone PASSED: All tests Yaesu FT-1D R Edges PASSED: All tests Yaesu FT-1D R BruteForce PASSED: All tests Yaesu FT-1D R CopyAll PASSED: All tests Yaesu FT-1D R Banks PASSED: All tests Yaesu FT-2800M Detect PASSED: All tests Yaesu FT-2800M Settings SKIPPED: Settings not supported Yaesu FT-2800M Clone PASSED: All tests Yaesu FT-2800M Edges PASSED: All tests Yaesu FT-2800M BruteForce PASSED: All tests Yaesu FT-2800M CopyAll PASSED: All tests Yaesu FT-2800M Banks SKIPPED: Banks not supported Yaesu FT-2900R/1900 Detect PASSED: All tests Yaesu FT-2900R/1900 Settings SKIPPED: Settings not supported Yaesu FT-2900R/1900 Clone PASSED: All tests Yaesu FT-2900R/1900 Edges PASSED: All tests Yaesu FT-2900R/1900 BruteForce PASSED: All tests Yaesu FT-2900R/1900 CopyAll PASSED: All tests Yaesu FT-2900R/1900 Banks PASSED: All tests Yaesu FT-60 Detect PASSED: All tests Yaesu FT-60 Settings PASSED: All tests Yaesu FT-60 Clone PASSED: All tests Yaesu FT-60 Edges PASSED: All tests Yaesu FT-60 BruteForce PASSED: All tests Yaesu FT-60 CopyAll PASSED: All tests Yaesu FT-60 Banks PASSED: All tests Yaesu FT-7800/7900 Detect PASSED: All tests Yaesu FT-7800/7900 Settings PASSED: All tests Yaesu FT-7800/7900 Clone PASSED: All tests Yaesu FT-7800/7900 Edges PASSED: All tests Yaesu FT-7800/7900 BruteForce PASSED: All tests Yaesu FT-7800/7900 CopyAll PASSED: All tests Yaesu FT-7800/7900 Banks PASSED: All tests Yaesu FT-817 Detect PASSED: All tests Yaesu FT-817 Settings PASSED: All tests Yaesu FT-817 Clone PASSED: All tests Yaesu FT-817 Edges PASSED: All tests Yaesu FT-817 BruteForce PASSED: All tests Yaesu FT-817 CopyAll PASSED: All tests Yaesu FT-817 Banks SKIPPED: Banks not supported Yaesu FT-817ND Detect PASSED: All tests Yaesu FT-817ND Settings PASSED: All tests Yaesu FT-817ND Clone PASSED: All tests Yaesu FT-817ND Edges PASSED: All tests Yaesu FT-817ND BruteForce PASSED: All tests Yaesu FT-817ND CopyAll PASSED: All tests Yaesu FT-817ND Banks SKIPPED: Banks not supported Yaesu FT-817ND (US) Detect PASSED: All tests Yaesu FT-817ND (US) Settings PASSED: All tests Yaesu FT-817ND (US) Clone PASSED: All tests Yaesu FT-817ND (US) Edges PASSED: All tests Yaesu FT-817ND (US) BruteForce PASSED: All tests Yaesu FT-817ND (US) CopyAll PASSED: All tests Yaesu FT-817ND (US) Banks SKIPPED: Banks not supported Yaesu FT-857/897 Detect PASSED: All tests Yaesu FT-857/897 Settings PASSED: All tests Yaesu FT-857/897 Clone PASSED: All tests Yaesu FT-857/897 Edges PASSED: All tests Yaesu FT-857/897 BruteForce PASSED: All tests Yaesu FT-857/897 CopyAll PASSED: All tests Yaesu FT-857/897 Banks SKIPPED: Banks not supported Yaesu FT-857/897 (U Detect PASSED: All tests Yaesu FT-857/897 (U Settings PASSED: All tests Yaesu FT-857/897 (U Clone PASSED: All tests Yaesu FT-857/897 (U Edges PASSED: All tests Yaesu FT-857/897 (U BruteForce PASSED: All tests Yaesu FT-857/897 (U CopyAll PASSED: All tests Yaesu FT-857/897 (U Banks SKIPPED: Banks not supported Yaesu FT-8800 Left Detect PASSED: All tests Yaesu FT-8800 Left Settings SKIPPED: Settings not supported Yaesu FT-8800 Left Clone PASSED: All tests Yaesu FT-8800 Left Edges PASSED: All tests Yaesu FT-8800 Left BruteForce PASSED: All tests Yaesu FT-8800 Left CopyAll PASSED: All tests Yaesu FT-8800 Left Banks PASSED: All tests Yaesu FT-8800 Right Detect PASSED: All tests Yaesu FT-8800 Right Settings SKIPPED: Settings not supported Yaesu FT-8800 Right Clone PASSED: All tests Yaesu FT-8800 Right Edges PASSED: All tests Yaesu FT-8800 Right BruteForce PASSED: All tests Yaesu FT-8800 Right CopyAll PASSED: All tests Yaesu FT-8800 Right Banks PASSED: All tests Yaesu FT-8900 Detect PASSED: All tests Yaesu FT-8900 Settings SKIPPED: Settings not supported Yaesu FT-8900 Clone PASSED: All tests Yaesu FT-8900 Edges PASSED: All tests Yaesu FT-8900 BruteForce PASSED: All tests Yaesu FT-8900 CopyAll PASSED: All tests Yaesu FT-8900 Banks SKIPPED: Banks not supported Yaesu FTM-350 Left Detect PASSED: All tests Yaesu FTM-350 Left Settings PASSED: All tests Yaesu FTM-350 Left Clone PASSED: All tests Yaesu FTM-350 Left Edges PASSED: All tests Yaesu FTM-350 Left BruteForce PASSED: All tests Yaesu FTM-350 Left CopyAll PASSED: All tests Yaesu FTM-350 Left Banks SKIPPED: Banks not supported Yaesu FTM-350 Right Detect PASSED: All tests Yaesu FTM-350 Right Settings SKIPPED: Settings not supported Yaesu FTM-350 Right Clone PASSED: All tests Yaesu FTM-350 Right Edges PASSED: All tests Yaesu FTM-350 Right BruteForce PASSED: All tests Yaesu FTM-350 Right CopyAll PASSED: All tests Yaesu FTM-350 Right Banks SKIPPED: Banks not supported Yaesu VX-2 Detect PASSED: All tests Yaesu VX-2 Settings PASSED: All tests Yaesu VX-2 Clone PASSED: All tests Yaesu VX-2 Edges PASSED: All tests Yaesu VX-2 BruteForce PASSED: All tests Yaesu VX-2 CopyAll PASSED: All tests Yaesu VX-2 Banks PASSED: All tests Yaesu VX-3 Detect PASSED: All tests Yaesu VX-3 Settings PASSED: All tests Yaesu VX-3 Clone PASSED: All tests Yaesu VX-3 Edges PASSED: All tests Yaesu VX-3 BruteForce PASSED: All tests Yaesu VX-3 CopyAll PASSED: All tests Yaesu VX-3 Banks PASSED: All tests Yaesu VX-5 Detect PASSED: All tests Yaesu VX-5 Settings SKIPPED: Settings not supported Yaesu VX-5 Clone PASSED: All tests Yaesu VX-5 Edges PASSED: All tests Yaesu VX-5 BruteForce PASSED: All tests Yaesu VX-5 CopyAll PASSED: All tests Yaesu VX-5 Banks PASSED: All tests Yaesu VX-6 Detect PASSED: All tests Yaesu VX-6 Settings SKIPPED: Settings not supported Yaesu VX-6 Clone PASSED: All tests Yaesu VX-6 Edges PASSED: All tests Yaesu VX-6 BruteForce PASSED: All tests Yaesu VX-6 CopyAll PASSED: All tests Yaesu VX-6 Banks PASSED: All tests Yaesu VX-7 Detect PASSED: All tests Yaesu VX-7 Settings SKIPPED: Settings not supported Yaesu VX-7 Clone PASSED: All tests Yaesu VX-7 Edges PASSED: All tests Yaesu VX-7 BruteForce PASSED: All tests Yaesu VX-7 CopyAll PASSED: All tests Yaesu VX-7 Banks PASSED: All tests Yaesu VX-8 R Detect PASSED: All tests Yaesu VX-8 R Settings SKIPPED: Settings not supported Yaesu VX-8 R Clone PASSED: All tests Yaesu VX-8 R Edges PASSED: All tests Yaesu VX-8 R BruteForce PASSED: All tests Yaesu VX-8 R CopyAll PASSED: All tests Yaesu VX-8 R Banks PASSED: All tests ---------------------------------------------------------------------- Results: TOTAL : 525 FAILED : 0 SKIPPED: 84 PASSED : 441 CRASHED: 0 [workspace] $ /bin/sh -xe /tmp/hudson5907256946088343781.sh + PATH=/usr/bin:/bin:/usr/local/bin ./run_all_tests.sh test_bit_array (tests.unit.test_bitwise.TestBitType) ... ok test_bit_array_fail (tests.unit.test_bitwise.TestBitType) ... ok test_bitfield_u16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_u24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_u8 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_ul16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_ul24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_bbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_lbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_lbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_int_array (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u8 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_char (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string_invalid_chars (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string_wrong_length (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_comment_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok test_comment_inline_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok test_missing_semicolon (tests.unit.test_bitwise.TestBitwiseErrors) ... ok test_seek (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_seekto (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_struct_one_element (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_two_elements (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_writes (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok split_tone_encode_test_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_none (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_none (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_fix_rounded_step_250 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_500 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_750 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_12_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_2_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_5_0 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_6_25 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_fractional_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step_fail (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_format_freq (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_bad (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_decimal (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whitespace (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whole (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_ensure_has_calls_almost_full (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_empty (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_partial (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full1 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full2 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_urcall_full (tests.unit.test_import_logic.DstarTests) ... ok test_import_bank (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffA_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffB_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_negative (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_too_big_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_uhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_errors (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_warnings (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_invalid (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_am (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_fm (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_name (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_closest (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_dst (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_src (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_same (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffA_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffB_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModelIndexInterface) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_icom_bank (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_index_bounds (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_next_mapping_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_auto_tone_mode_cross (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_pol (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_rx (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tone (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tsql (tests.unit.test_memedit_edits.TestEdits) ... ok test_init (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_bad_portnames (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_sorted (tests.unit.test_platform.Win32PlatformTest) ... ok test_apply_callback (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_group (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_multi (tests.unit.test_settings.TestSettingContainers) ... ok test_changed (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_boolean (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_float (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_integer (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_list (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_string (tests.unit.test_settings.TestSettingValues) ... ok test_validate_callback (tests.unit.test_settings.TestSettingValues) ... ok test_delete_hole_with_all (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_all_full (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_without_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_with_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_without_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok ---------------------------------------------------------------------- Ran 151 tests in 0.051s OK Patch 'tip' is OK Checking for PEP8 regressions... real 0m7.305s user 0m7.184s sys 0m0.056s ================================================ Tests OK Email was triggered for: Success Sending email for trigger: Success

1 0

[chirp_devel] [Feidaxin FD-268A] New Model, initial driver test (test failed, Help!), Fixes #2169
by M.Sc. Pavel Milanes Costa 29 Nov '15

29 Nov '15

Hi, I'm new to chirp development. I'm building a new driver for the Feidaxin FD-268A and it will possibly work on the FD-268B (UHF) version. Attached is the img of the radio & patch to the main chirp.hg repository in alpha state (v0.1) it works fine in the memory editing part, I'm working on the settings, but the main issue is this: pavel@agatha-lt:~/chirp.hg/tests$ ./run_tests -d Feidaxin_FD-268A Feidaxin FD-268A Detect PASSED: All tests Feidaxin FD-268A Settings SKIPPED: Settings not supported Feidaxin FD-268A Clone PASSED: All tests Feidaxin FD-268A Edges PASSED: All tests Feidaxin FD-268A BruteForce FAILED: Field `tmode' is `Tone', expected `Cross' Feidaxin FD-268A CopyAll PASSED: All tests Feidaxin FD-268A Banks SKIPPED: Banks not supported ---------------------------------------------------------------------- Results: TOTAL : 7 FAILED : 1 SKIPPED: 2 PASSED : 4 CRASHED: 0 I used the code in chirp_common to parse the tone data, and even so I can't get the bruteforce test to pass in the "cross" section this has me stuck on this; despite this result in the test, I ran a series of test and the software works fine on programming and reading the radio channel data. Any advice will be of great help, I'm a junior python coder... In the setting parts, in the code are the read and show part (get_settings) i will working on the set_settings part Also atached is a python (windows) script called fd268.py to get a dump of the Feidaxin FD-268A and possibly of the Feidaxin FD-268B version, if any of you has a B version please use it to get the img of it and please send it to me by email.... 73 and glad to help on chirp.

2 4

[chirp_devel] Build test results: Successful
by Build System 29 Nov '15

29 Nov '15

Tested changes: [Dan Smith <dsmith(a)danplanet.com>] Re-fix some pep8 fails from #3017 Full log: Started by an SCM change Building in workspace /var/lib/jenkins/jobs/chirp-test/workspace [workspace] $ hg showconfig paths.default [workspace] $ hg pull --rev default [workspace] $ hg update --clean --rev default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved [workspace] $ hg log --rev . --template {node} [workspace] $ hg log --rev . --template {rev} [workspace] $ hg log --rev a4379a5e26ff78f2c7e39f96fca1a0bd35669239 [workspace] $ hg log --template "<changeset node='{node}' author='{author|xmlescape}' rev='{rev}' date='{date}'><msg>{desc|xmlescape}</msg><added>{file_adds|stringify|xmlescape}</added><deleted>{file_dels|stringify|xmlescape}</deleted><files>{files|stringify|xmlescape}</files><parents>{parents}</parents></changeset>\n" --rev default:0 --follow --prune a4379a5e26ff78f2c7e39f96fca1a0bd35669239 No emails were triggered. [workspace] $ /bin/sh -xe /tmp/hudson4471124009022166267.sh + cd tests + ./run_tests + cat /var/lib/jenkins/.chirp/debug.log [2015-11-29 10:40:13,619] chirp.logger - DEBUG: CHIRP 0.3.0dev on Linux - Ubuntu 14.04.3 LTS (Python 2.7.6) [2015-11-29 10:40:13,619] chirp.logger - DEBUG: verbosity=50 Alinco DJ175 Detect PASSED: All tests Alinco DJ175 Settings SKIPPED: Settings not supported Alinco DJ175 Clone PASSED: All tests Alinco DJ175 Edges PASSED: All tests Alinco DJ175 BruteForce PASSED: All tests Alinco DJ175 CopyAll PASSED: All tests Alinco DJ175 Banks SKIPPED: Banks not supported Alinco DJ596 Detect PASSED: All tests Alinco DJ596 Settings SKIPPED: Settings not supported Alinco DJ596 Clone PASSED: All tests Alinco DJ596 Edges PASSED: All tests Alinco DJ596 BruteForce PASSED: All tests Alinco DJ596 CopyAll PASSED: All tests Alinco DJ596 Banks SKIPPED: Banks not supported Alinco DR235T Detect PASSED: All tests Alinco DR235T Settings SKIPPED: Settings not supported Alinco DR235T Clone PASSED: All tests Alinco DR235T Edges PASSED: All tests Alinco DR235T BruteForce PASSED: All tests Alinco DR235T CopyAll PASSED: All tests Alinco DR235T Banks SKIPPED: Banks not supported AnyTone OBLTR-8R Detect PASSED: All tests AnyTone OBLTR-8R Settings PASSED: All tests AnyTone OBLTR-8R Clone PASSED: All tests AnyTone OBLTR-8R Edges PASSED: All tests AnyTone OBLTR-8R BruteForce PASSED: All tests AnyTone OBLTR-8R CopyAll PASSED: All tests AnyTone OBLTR-8R Banks SKIPPED: Banks not supported AnyTone TERMN-8R Detect PASSED: All tests AnyTone TERMN-8R Settings PASSED: All tests AnyTone TERMN-8R Clone PASSED: All tests AnyTone TERMN-8R Edges PASSED: All tests AnyTone TERMN-8R BruteForce PASSED: All tests AnyTone TERMN-8R CopyAll PASSED: All tests AnyTone TERMN-8R Banks SKIPPED: Banks not supported Baofeng BF-888 Detect PASSED: All tests Baofeng BF-888 Settings PASSED: All tests Baofeng BF-888 Clone PASSED: All tests Baofeng BF-888 Edges PASSED: All tests Baofeng BF-888 BruteForce PASSED: All tests Baofeng BF-888 CopyAll PASSED: All tests Baofeng BF-888 Banks SKIPPED: Banks not supported Baofeng F-11 Detect PASSED: All tests Baofeng F-11 Settings PASSED: All tests Baofeng F-11 Clone PASSED: All tests Baofeng F-11 Edges PASSED: All tests Baofeng F-11 BruteForce PASSED: All tests Baofeng F-11 CopyAll PASSED: All tests Baofeng F-11 Banks SKIPPED: Banks not supported Baofeng UV-3R Detect PASSED: All tests Baofeng UV-3R Settings PASSED: All tests Baofeng UV-3R Clone PASSED: All tests Baofeng UV-3R Edges PASSED: All tests Baofeng UV-3R BruteForce PASSED: All tests Baofeng UV-3R CopyAll PASSED: All tests Baofeng UV-3R Banks SKIPPED: Banks not supported Baofeng UV-5R Detect PASSED: All tests Baofeng UV-5R Settings PASSED: All tests Baofeng UV-5R Clone PASSED: All tests Baofeng UV-5R Edges PASSED: All tests Baofeng UV-5R BruteForce PASSED: All tests Baofeng UV-5R CopyAll PASSED: All tests Baofeng UV-5R Banks SKIPPED: Banks not supported Baofeng UV-B5 Detect PASSED: All tests Baofeng UV-B5 Settings PASSED: All tests Baofeng UV-B5 Clone PASSED: All tests Baofeng UV-B5 Edges PASSED: All tests Baofeng UV-B5 BruteForce PASSED: All tests Baofeng UV-B5 CopyAll PASSED: All tests Baofeng UV-B5 Banks SKIPPED: Banks not supported Baojie BJ-9900 Left Detect PASSED: All tests Baojie BJ-9900 Left Settings SKIPPED: Settings not supported Baojie BJ-9900 Left Clone PASSED: All tests Baojie BJ-9900 Left Edges PASSED: All tests Baojie BJ-9900 Left BruteForce PASSED: All tests Baojie BJ-9900 Left CopyAll PASSED: All tests Baojie BJ-9900 Left Banks SKIPPED: Banks not supported Baojie BJ-9900 Right Detect PASSED: All tests Baojie BJ-9900 Right Settings SKIPPED: Settings not supported Baojie BJ-9900 Right Clone PASSED: All tests Baojie BJ-9900 Right Edges PASSED: All tests Baojie BJ-9900 Right BruteForce PASSED: All tests Baojie BJ-9900 Right CopyAll PASSED: All tests Baojie BJ-9900 Right Banks SKIPPED: Banks not supported Feidaxin FD-268A Detect PASSED: All tests Feidaxin FD-268A Settings PASSED: All tests Feidaxin FD-268A Clone PASSED: All tests Feidaxin FD-268A Edges PASSED: All tests Feidaxin FD-268A BruteForce PASSED: All tests Feidaxin FD-268A CopyAll PASSED: All tests Feidaxin FD-268A Banks SKIPPED: Banks not supported Feidaxin FD-268B Detect PASSED: All tests Feidaxin FD-268B Settings PASSED: All tests Feidaxin FD-268B Clone PASSED: All tests Feidaxin FD-268B Edges PASSED: All tests Feidaxin FD-268B BruteForce PASSED: All tests Feidaxin FD-268B CopyAll PASSED: All tests Feidaxin FD-268B Banks SKIPPED: Banks not supported Feidaxin FD-288B Detect PASSED: All tests Feidaxin FD-288B Settings PASSED: All tests Feidaxin FD-288B Clone PASSED: All tests Feidaxin FD-288B Edges PASSED: All tests Feidaxin FD-288B BruteForce PASSED: All tests Feidaxin FD-288B CopyAll PASSED: All tests Feidaxin FD-288B Banks SKIPPED: Banks not supported Icom IC-208H Detect PASSED: All tests Icom IC-208H Settings SKIPPED: Settings not supported Icom IC-208H Clone PASSED: All tests Icom IC-208H Edges PASSED: All tests Icom IC-208H BruteForce PASSED: All tests Icom IC-208H CopyAll PASSED: All tests Icom IC-208H Banks PASSED: All tests Icom IC-2100H Detect PASSED: All tests Icom IC-2100H Settings SKIPPED: Settings not supported Icom IC-2100H Clone PASSED: All tests Icom IC-2100H Edges PASSED: All tests Icom IC-2100H BruteForce PASSED: All tests Icom IC-2100H CopyAll PASSED: All tests Icom IC-2100H Banks SKIPPED: Banks not supported Icom IC-2200H Detect PASSED: All tests Icom IC-2200H Settings PASSED: All tests Icom IC-2200H Clone PASSED: All tests Icom IC-2200H Edges PASSED: All tests Icom IC-2200H BruteForce PASSED: All tests Icom IC-2200H CopyAll PASSED: All tests Icom IC-2200H Banks PASSED: All tests Icom IC-2720H Detect PASSED: All tests Icom IC-2720H Settings SKIPPED: Settings not supported Icom IC-2720H Clone PASSED: All tests Icom IC-2720H Edges PASSED: All tests Icom IC-2720H BruteForce PASSED: All tests Icom IC-2720H CopyAll PASSED: All tests Icom IC-2720H Banks PASSED: All tests Icom IC-2820H Detect PASSED: All tests Icom IC-2820H Settings PASSED: All tests Icom IC-2820H Clone PASSED: All tests Icom IC-2820H Edges PASSED: All tests Icom IC-2820H BruteForce PASSED: All tests Icom IC-2820H CopyAll PASSED: All tests Icom IC-2820H Banks PASSED: All tests Icom IC-Q7A Detect PASSED: All tests Icom IC-Q7A Settings PASSED: All tests Icom IC-Q7A Clone PASSED: All tests Icom IC-Q7A Edges PASSED: All tests Icom IC-Q7A BruteForce PASSED: All tests Icom IC-Q7A CopyAll PASSED: All tests Icom IC-Q7A Banks SKIPPED: Banks not supported Icom IC-T70 Detect PASSED: All tests Icom IC-T70 Settings SKIPPED: Settings not supported Icom IC-T70 Clone PASSED: All tests Icom IC-T70 Edges PASSED: All tests Icom IC-T70 BruteForce PASSED: All tests Icom IC-T70 CopyAll PASSED: All tests Icom IC-T70 Banks PASSED: All tests Icom IC-T7H Detect PASSED: All tests Icom IC-T7H Settings SKIPPED: Settings not supported Icom IC-T7H Clone PASSED: All tests Icom IC-T7H Edges PASSED: All tests Icom IC-T7H BruteForce PASSED: All tests Icom IC-T7H CopyAll PASSED: All tests Icom IC-T7H Banks SKIPPED: Banks not supported Icom IC-T8A Detect PASSED: All tests Icom IC-T8A Settings SKIPPED: Settings not supported Icom IC-T8A Clone PASSED: All tests Icom IC-T8A Edges PASSED: All tests Icom IC-T8A BruteForce PASSED: All tests Icom IC-T8A CopyAll PASSED: All tests Icom IC-T8A Banks SKIPPED: Banks not supported Icom IC-V82/U82 Detect PASSED: All tests Icom IC-V82/U82 Settings SKIPPED: Settings not supported Icom IC-V82/U82 Clone PASSED: All tests Icom IC-V82/U82 Edges PASSED: All tests Icom IC-V82/U82 BruteForce PASSED: All tests Icom IC-V82/U82 CopyAll PASSED: All tests Icom IC-V82/U82 Banks PASSED: All tests Icom IC-W32A VHF Detect PASSED: All tests Icom IC-W32A VHF Settings SKIPPED: Settings not supported Icom IC-W32A VHF Clone PASSED: All tests Icom IC-W32A VHF Edges PASSED: All tests Icom IC-W32A VHF BruteForce PASSED: All tests Icom IC-W32A VHF CopyAll PASSED: All tests Icom IC-W32A VHF Banks SKIPPED: Banks not supported Icom IC-W32A UHF Detect PASSED: All tests Icom IC-W32A UHF Settings SKIPPED: Settings not supported Icom IC-W32A UHF Clone PASSED: All tests Icom IC-W32A UHF Edges PASSED: All tests Icom IC-W32A UHF BruteForce PASSED: All tests Icom IC-W32A UHF CopyAll PASSED: All tests Icom IC-W32A UHF Banks SKIPPED: Banks not supported Icom ID-31A Detect PASSED: All tests Icom ID-31A Settings PASSED: All tests Icom ID-31A Clone PASSED: All tests Icom ID-31A Edges PASSED: All tests Icom ID-31A BruteForce PASSED: All tests Icom ID-31A CopyAll PASSED: All tests Icom ID-31A Banks PASSED: All tests Icom ID-51 Detect PASSED: All tests Icom ID-51 Settings PASSED: All tests Icom ID-51 Clone PASSED: All tests Icom ID-51 Edges PASSED: All tests Icom ID-51 BruteForce PASSED: All tests Icom ID-51 CopyAll PASSED: All tests Icom ID-51 Banks PASSED: All tests Icom ID-51 Plus Detect PASSED: All tests Icom ID-51 Plus Settings PASSED: All tests Icom ID-51 Plus Clone PASSED: All tests Icom ID-51 Plus Edges PASSED: All tests Icom ID-51 Plus BruteForce PASSED: All tests Icom ID-51 Plus CopyAll PASSED: All tests Icom ID-51 Plus Banks PASSED: All tests Icom ID-800H v2 Detect PASSED: All tests Icom ID-800H v2 Settings PASSED: All tests Icom ID-800H v2 Clone PASSED: All tests Icom ID-800H v2 Edges PASSED: All tests Icom ID-800H v2 BruteForce PASSED: All tests Icom ID-800H v2 CopyAll PASSED: All tests Icom ID-800H v2 Banks PASSED: All tests Icom ID-880H Detect PASSED: All tests Icom ID-880H Settings PASSED: All tests Icom ID-880H Clone PASSED: All tests Icom ID-880H Edges PASSED: All tests Icom ID-880H BruteForce PASSED: All tests Icom ID-880H CopyAll PASSED: All tests Icom ID-880H Banks PASSED: All tests Jetstream JT220M Detect PASSED: All tests Jetstream JT220M Settings SKIPPED: Settings not supported Jetstream JT220M Clone PASSED: All tests Jetstream JT220M Edges PASSED: All tests Jetstream JT220M BruteForce PASSED: All tests Jetstream JT220M CopyAll PASSED: All tests Jetstream JT220M Banks SKIPPED: Banks not supported Jetstream JT270M Detect PASSED: All tests Jetstream JT270M Settings PASSED: All tests Jetstream JT270M Clone PASSED: All tests Jetstream JT270M Edges PASSED: All tests Jetstream JT270M BruteForce PASSED: All tests Jetstream JT270M CopyAll PASSED: All tests Jetstream JT270M Banks SKIPPED: Banks not supported KYD IP-620 Detect PASSED: All tests KYD IP-620 Settings PASSED: All tests KYD IP-620 Clone PASSED: All tests KYD IP-620 Edges PASSED: All tests KYD IP-620 BruteForce PASSED: All tests KYD IP-620 CopyAll PASSED: All tests KYD IP-620 Banks SKIPPED: Banks not supported Kenwood TH-D72 (clone Detect PASSED: All tests Kenwood TH-D72 (clone Settings SKIPPED: Settings not supported Kenwood TH-D72 (clone Clone PASSED: All tests Kenwood TH-D72 (clone Edges PASSED: All tests Kenwood TH-D72 (clone BruteForce PASSED: All tests Kenwood TH-D72 (clone CopyAll PASSED: All tests Kenwood TH-D72 (clone Banks SKIPPED: Banks not supported Kenwood TK-8102 Detect PASSED: All tests Kenwood TK-8102 Settings PASSED: All tests Kenwood TK-8102 Clone PASSED: All tests Kenwood TK-8102 Edges PASSED: All tests Kenwood TK-8102 BruteForce PASSED: All tests Kenwood TK-8102 CopyAll PASSED: All tests Kenwood TK-8102 Banks SKIPPED: Banks not supported Leixen VV-898 Detect PASSED: All tests Leixen VV-898 Settings PASSED: All tests Leixen VV-898 Clone PASSED: All tests Leixen VV-898 Edges PASSED: All tests Leixen VV-898 BruteForce PASSED: All tests Leixen VV-898 CopyAll PASSED: All tests Leixen VV-898 Banks SKIPPED: Banks not supported Polmar DB-50M Detect PASSED: All tests Polmar DB-50M Settings PASSED: All tests Polmar DB-50M Clone PASSED: All tests Polmar DB-50M Edges PASSED: All tests Polmar DB-50M BruteForce PASSED: All tests Polmar DB-50M CopyAll PASSED: All tests Polmar DB-50M Banks SKIPPED: Banks not supported Puxing PX-2R Detect PASSED: All tests Puxing PX-2R Settings SKIPPED: Settings not supported Puxing PX-2R Clone PASSED: All tests Puxing PX-2R Edges PASSED: All tests Puxing PX-2R BruteForce PASSED: All tests Puxing PX-2R CopyAll PASSED: All tests Puxing PX-2R Banks SKIPPED: Banks not supported Puxing PX-777 Detect PASSED: All tests Puxing PX-777 Settings SKIPPED: Settings not supported Puxing PX-777 Clone PASSED: All tests Puxing PX-777 Edges PASSED: All tests Puxing PX-777 BruteForce PASSED: All tests Puxing PX-777 CopyAll PASSED: All tests Puxing PX-777 Banks SKIPPED: Banks not supported Sainsonic AP510 Detect PASSED: All tests Sainsonic AP510 Settings PASSED: All tests Sainsonic AP510 Clone PASSED: All tests Sainsonic AP510 Edges PASSED: All tests Sainsonic AP510 BruteForce PASSED: All tests Sainsonic AP510 CopyAll PASSED: All tests Sainsonic AP510 Banks SKIPPED: Banks not supported TYT TH-9800 Detect PASSED: All tests TYT TH-9800 Settings PASSED: All tests TYT TH-9800 Clone PASSED: All tests TYT TH-9800 Edges PASSED: All tests TYT TH-9800 BruteForce PASSED: All tests TYT TH-9800 CopyAll PASSED: All tests TYT TH-9800 Banks SKIPPED: Banks not supported TYT TH-UV3R Detect PASSED: All tests TYT TH-UV3R Settings SKIPPED: Settings not supported TYT TH-UV3R Clone PASSED: All tests TYT TH-UV3R Edges PASSED: All tests TYT TH-UV3R BruteForce PASSED: All tests TYT TH-UV3R CopyAll PASSED: All tests TYT TH-UV3R Banks SKIPPED: Banks not supported TYT TH-UV3R-25 Detect PASSED: All tests TYT TH-UV3R-25 Settings SKIPPED: Settings not supported TYT TH-UV3R-25 Clone PASSED: All tests TYT TH-UV3R-25 Edges PASSED: All tests TYT TH-UV3R-25 BruteForce PASSED: All tests TYT TH-UV3R-25 CopyAll PASSED: All tests TYT TH-UV3R-25 Banks SKIPPED: Banks not supported TYT TH-UVF1 Detect PASSED: All tests TYT TH-UVF1 Settings PASSED: All tests TYT TH-UVF1 Clone PASSED: All tests TYT TH-UVF1 Edges PASSED: All tests TYT TH-UVF1 BruteForce PASSED: All tests TYT TH-UVF1 CopyAll PASSED: All tests TYT TH-UVF1 Banks SKIPPED: Banks not supported TYT TH9000_144 Detect PASSED: All tests TYT TH9000_144 Settings PASSED: All tests TYT TH9000_144 Clone PASSED: All tests TYT TH9000_144 Edges PASSED: All tests TYT TH9000_144 BruteForce PASSED: All tests TYT TH9000_144 CopyAll PASSED: All tests TYT TH9000_144 Banks SKIPPED: Banks not supported Vertex VXA-700 Detect PASSED: All tests Vertex VXA-700 Settings SKIPPED: Settings not supported Vertex VXA-700 Clone PASSED: All tests Vertex VXA-700 Edges PASSED: All tests Vertex VXA-700 BruteForce PASSED: All tests Vertex VXA-700 CopyAll PASSED: All tests Vertex VXA-700 Banks SKIPPED: Banks not supported Wouxun KG-816 Detect PASSED: All tests Wouxun KG-816 Settings PASSED: All tests Wouxun KG-816 Clone PASSED: All tests Wouxun KG-816 Edges PASSED: All tests Wouxun KG-816 BruteForce PASSED: All tests Wouxun KG-816 CopyAll PASSED: All tests Wouxun KG-816 Banks SKIPPED: Banks not supported Wouxun KG-818 Detect PASSED: All tests Wouxun KG-818 Settings PASSED: All tests Wouxun KG-818 Clone PASSED: All tests Wouxun KG-818 Edges PASSED: All tests Wouxun KG-818 BruteForce PASSED: All tests Wouxun KG-818 CopyAll PASSED: All tests Wouxun KG-818 Banks SKIPPED: Banks not supported Wouxun KG-UV6 Detect PASSED: All tests Wouxun KG-UV6 Settings PASSED: All tests Wouxun KG-UV6 Clone PASSED: All tests Wouxun KG-UV6 Edges PASSED: All tests Wouxun KG-UV6 BruteForce PASSED: All tests Wouxun KG-UV6 CopyAll PASSED: All tests Wouxun KG-UV6 Banks SKIPPED: Banks not supported Wouxun KG-UV8D Detect PASSED: All tests Wouxun KG-UV8D Settings PASSED: All tests Wouxun KG-UV8D Clone PASSED: All tests Wouxun KG-UV8D Edges PASSED: All tests Wouxun KG-UV8D BruteForce PASSED: All tests Wouxun KG-UV8D CopyAll PASSED: All tests Wouxun KG-UV8D Banks SKIPPED: Banks not supported Wouxun KG-UVD1P Detect PASSED: All tests Wouxun KG-UVD1P Settings PASSED: All tests Wouxun KG-UVD1P Clone PASSED: All tests Wouxun KG-UVD1P Edges PASSED: All tests Wouxun KG-UVD1P BruteForce PASSED: All tests Wouxun KG-UVD1P CopyAll PASSED: All tests Wouxun KG-UVD1P Banks SKIPPED: Banks not supported Yaesu FT-1802M Detect PASSED: All tests Yaesu FT-1802M Settings SKIPPED: Settings not supported Yaesu FT-1802M Clone PASSED: All tests Yaesu FT-1802M Edges PASSED: All tests Yaesu FT-1802M BruteForce PASSED: All tests Yaesu FT-1802M CopyAll PASSED: All tests Yaesu FT-1802M Banks SKIPPED: Banks not supported Yaesu FT-1D R Detect PASSED: All tests Yaesu FT-1D R Settings PASSED: All tests Yaesu FT-1D R Clone PASSED: All tests Yaesu FT-1D R Edges PASSED: All tests Yaesu FT-1D R BruteForce PASSED: All tests Yaesu FT-1D R CopyAll PASSED: All tests Yaesu FT-1D R Banks PASSED: All tests Yaesu FT-2800M Detect PASSED: All tests Yaesu FT-2800M Settings SKIPPED: Settings not supported Yaesu FT-2800M Clone PASSED: All tests Yaesu FT-2800M Edges PASSED: All tests Yaesu FT-2800M BruteForce PASSED: All tests Yaesu FT-2800M CopyAll PASSED: All tests Yaesu FT-2800M Banks SKIPPED: Banks not supported Yaesu FT-2900R/1900 Detect PASSED: All tests Yaesu FT-2900R/1900 Settings SKIPPED: Settings not supported Yaesu FT-2900R/1900 Clone PASSED: All tests Yaesu FT-2900R/1900 Edges PASSED: All tests Yaesu FT-2900R/1900 BruteForce PASSED: All tests Yaesu FT-2900R/1900 CopyAll PASSED: All tests Yaesu FT-2900R/1900 Banks PASSED: All tests Yaesu FT-60 Detect PASSED: All tests Yaesu FT-60 Settings PASSED: All tests Yaesu FT-60 Clone PASSED: All tests Yaesu FT-60 Edges PASSED: All tests Yaesu FT-60 BruteForce PASSED: All tests Yaesu FT-60 CopyAll PASSED: All tests Yaesu FT-60 Banks PASSED: All tests Yaesu FT-7800/7900 Detect PASSED: All tests Yaesu FT-7800/7900 Settings PASSED: All tests Yaesu FT-7800/7900 Clone PASSED: All tests Yaesu FT-7800/7900 Edges PASSED: All tests Yaesu FT-7800/7900 BruteForce PASSED: All tests Yaesu FT-7800/7900 CopyAll PASSED: All tests Yaesu FT-7800/7900 Banks PASSED: All tests Yaesu FT-817 Detect PASSED: All tests Yaesu FT-817 Settings PASSED: All tests Yaesu FT-817 Clone PASSED: All tests Yaesu FT-817 Edges PASSED: All tests Yaesu FT-817 BruteForce PASSED: All tests Yaesu FT-817 CopyAll PASSED: All tests Yaesu FT-817 Banks SKIPPED: Banks not supported Yaesu FT-817ND Detect PASSED: All tests Yaesu FT-817ND Settings PASSED: All tests Yaesu FT-817ND Clone PASSED: All tests Yaesu FT-817ND Edges PASSED: All tests Yaesu FT-817ND BruteForce PASSED: All tests Yaesu FT-817ND CopyAll PASSED: All tests Yaesu FT-817ND Banks SKIPPED: Banks not supported Yaesu FT-817ND (US) Detect PASSED: All tests Yaesu FT-817ND (US) Settings PASSED: All tests Yaesu FT-817ND (US) Clone PASSED: All tests Yaesu FT-817ND (US) Edges PASSED: All tests Yaesu FT-817ND (US) BruteForce PASSED: All tests Yaesu FT-817ND (US) CopyAll PASSED: All tests Yaesu FT-817ND (US) Banks SKIPPED: Banks not supported Yaesu FT-857/897 Detect PASSED: All tests Yaesu FT-857/897 Settings PASSED: All tests Yaesu FT-857/897 Clone PASSED: All tests Yaesu FT-857/897 Edges PASSED: All tests Yaesu FT-857/897 BruteForce PASSED: All tests Yaesu FT-857/897 CopyAll PASSED: All tests Yaesu FT-857/897 Banks SKIPPED: Banks not supported Yaesu FT-857/897 (U Detect PASSED: All tests Yaesu FT-857/897 (U Settings PASSED: All tests Yaesu FT-857/897 (U Clone PASSED: All tests Yaesu FT-857/897 (U Edges PASSED: All tests Yaesu FT-857/897 (U BruteForce PASSED: All tests Yaesu FT-857/897 (U CopyAll PASSED: All tests Yaesu FT-857/897 (U Banks SKIPPED: Banks not supported Yaesu FT-8800 Left Detect PASSED: All tests Yaesu FT-8800 Left Settings SKIPPED: Settings not supported Yaesu FT-8800 Left Clone PASSED: All tests Yaesu FT-8800 Left Edges PASSED: All tests Yaesu FT-8800 Left BruteForce PASSED: All tests Yaesu FT-8800 Left CopyAll PASSED: All tests Yaesu FT-8800 Left Banks PASSED: All tests Yaesu FT-8800 Right Detect PASSED: All tests Yaesu FT-8800 Right Settings SKIPPED: Settings not supported Yaesu FT-8800 Right Clone PASSED: All tests Yaesu FT-8800 Right Edges PASSED: All tests Yaesu FT-8800 Right BruteForce PASSED: All tests Yaesu FT-8800 Right CopyAll PASSED: All tests Yaesu FT-8800 Right Banks PASSED: All tests Yaesu FT-8900 Detect PASSED: All tests Yaesu FT-8900 Settings SKIPPED: Settings not supported Yaesu FT-8900 Clone PASSED: All tests Yaesu FT-8900 Edges PASSED: All tests Yaesu FT-8900 BruteForce PASSED: All tests Yaesu FT-8900 CopyAll PASSED: All tests Yaesu FT-8900 Banks SKIPPED: Banks not supported Yaesu FTM-350 Left Detect PASSED: All tests Yaesu FTM-350 Left Settings PASSED: All tests Yaesu FTM-350 Left Clone PASSED: All tests Yaesu FTM-350 Left Edges PASSED: All tests Yaesu FTM-350 Left BruteForce PASSED: All tests Yaesu FTM-350 Left CopyAll PASSED: All tests Yaesu FTM-350 Left Banks SKIPPED: Banks not supported Yaesu FTM-350 Right Detect PASSED: All tests Yaesu FTM-350 Right Settings SKIPPED: Settings not supported Yaesu FTM-350 Right Clone PASSED: All tests Yaesu FTM-350 Right Edges PASSED: All tests Yaesu FTM-350 Right BruteForce PASSED: All tests Yaesu FTM-350 Right CopyAll PASSED: All tests Yaesu FTM-350 Right Banks SKIPPED: Banks not supported Yaesu VX-2 Detect PASSED: All tests Yaesu VX-2 Settings PASSED: All tests Yaesu VX-2 Clone PASSED: All tests Yaesu VX-2 Edges PASSED: All tests Yaesu VX-2 BruteForce PASSED: All tests Yaesu VX-2 CopyAll PASSED: All tests Yaesu VX-2 Banks PASSED: All tests Yaesu VX-3 Detect PASSED: All tests Yaesu VX-3 Settings PASSED: All tests Yaesu VX-3 Clone PASSED: All tests Yaesu VX-3 Edges PASSED: All tests Yaesu VX-3 BruteForce PASSED: All tests Yaesu VX-3 CopyAll PASSED: All tests Yaesu VX-3 Banks PASSED: All tests Yaesu VX-5 Detect PASSED: All tests Yaesu VX-5 Settings SKIPPED: Settings not supported Yaesu VX-5 Clone PASSED: All tests Yaesu VX-5 Edges PASSED: All tests Yaesu VX-5 BruteForce PASSED: All tests Yaesu VX-5 CopyAll PASSED: All tests Yaesu VX-5 Banks PASSED: All tests Yaesu VX-6 Detect PASSED: All tests Yaesu VX-6 Settings SKIPPED: Settings not supported Yaesu VX-6 Clone PASSED: All tests Yaesu VX-6 Edges PASSED: All tests Yaesu VX-6 BruteForce PASSED: All tests Yaesu VX-6 CopyAll PASSED: All tests Yaesu VX-6 Banks PASSED: All tests Yaesu VX-7 Detect PASSED: All tests Yaesu VX-7 Settings SKIPPED: Settings not supported Yaesu VX-7 Clone PASSED: All tests Yaesu VX-7 Edges PASSED: All tests Yaesu VX-7 BruteForce PASSED: All tests Yaesu VX-7 CopyAll PASSED: All tests Yaesu VX-7 Banks PASSED: All tests Yaesu VX-8 R Detect PASSED: All tests Yaesu VX-8 R Settings SKIPPED: Settings not supported Yaesu VX-8 R Clone PASSED: All tests Yaesu VX-8 R Edges PASSED: All tests Yaesu VX-8 R BruteForce PASSED: All tests Yaesu VX-8 R CopyAll PASSED: All tests Yaesu VX-8 R Banks PASSED: All tests ---------------------------------------------------------------------- Results: TOTAL : 525 FAILED : 0 SKIPPED: 84 PASSED : 441 CRASHED: 0 [workspace] $ /bin/sh -xe /tmp/hudson5679969559878007023.sh + PATH=/usr/bin:/bin:/usr/local/bin ./run_all_tests.sh test_bit_array (tests.unit.test_bitwise.TestBitType) ... ok test_bit_array_fail (tests.unit.test_bitwise.TestBitType) ... ok test_bitfield_u16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_u24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_u8 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_ul16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_ul24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_bbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_lbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_lbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_int_array (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u8 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_char (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string_invalid_chars (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string_wrong_length (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_comment_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok test_comment_inline_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok test_missing_semicolon (tests.unit.test_bitwise.TestBitwiseErrors) ... ok test_seek (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_seekto (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_struct_one_element (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_two_elements (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_writes (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok split_tone_encode_test_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_none (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_none (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_fix_rounded_step_250 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_500 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_750 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_12_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_2_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_5_0 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_6_25 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_fractional_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step_fail (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_format_freq (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_bad (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_decimal (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whitespace (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whole (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_ensure_has_calls_almost_full (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_empty (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_partial (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full1 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full2 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_urcall_full (tests.unit.test_import_logic.DstarTests) ... ok test_import_bank (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffA_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffB_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_negative (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_too_big_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_uhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_errors (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_warnings (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_invalid (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_am (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_fm (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_name (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_closest (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_dst (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_src (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_same (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffA_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffB_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModelIndexInterface) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_icom_bank (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_index_bounds (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_next_mapping_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_auto_tone_mode_cross (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_pol (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_rx (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tone (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tsql (tests.unit.test_memedit_edits.TestEdits) ... ok test_init (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_bad_portnames (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_sorted (tests.unit.test_platform.Win32PlatformTest) ... ok test_apply_callback (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_group (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_multi (tests.unit.test_settings.TestSettingContainers) ... ok test_changed (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_boolean (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_float (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_integer (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_list (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_string (tests.unit.test_settings.TestSettingValues) ... ok test_validate_callback (tests.unit.test_settings.TestSettingValues) ... ok test_delete_hole_with_all (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_all_full (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_without_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_with_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_without_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok ---------------------------------------------------------------------- Ran 151 tests in 0.051s OK Patch 'tip' is OK Checking for PEP8 regressions... real 0m6.941s user 0m6.893s sys 0m0.033s ================================================ Tests OK Email was triggered for: Success Sending email for trigger: Success

1 0