- Developers - lists.chirpmyradio.com

[chirp_devel] [PATCH] [AP510] Disable AP510 driver. In response to #3617
by Tom Hayward 05 May '16

05 May '16

# HG changeset patch # User Tom Hayward <tom(a)tomh.us> # Date 1462416169 25200 # Wed May 04 19:42:49 2016 -0700 # Node ID 8539639634c23a8d20608ab19e47b40c999501a3 # Parent edcad67aca5154dddce0813302eacda0b1849131 [AP510] Disable AP510 driver. In response to #3617 Only a buggy, outdated firmware version is supported by Chirp. Newer firmware revisions changed the programming protocol and are incompatible. To avoid confusion and discourage running buggy firmware, this patch disables the AP510 driver in Chirp. The code should remain, as it is a great starting point for anyone wishing to write support for the latest AP510 firmware. diff -r edcad67aca51 -r 8539639634c2 chirp/drivers/ap510.py --- a/chirp/drivers/ap510.py Wed May 04 18:17:56 2016 -0700 +++ b/chirp/drivers/ap510.py Wed May 04 19:42:49 2016 -0700 @@ -343,7 +343,6 @@ "offset", "mode", "tuning_step", "bank_index"] -(a)directory.register class AP510Radio(chirp_common.CloneModeRadio): """Sainsonic AP510""" BAUD_RATE = 9600

1 0

[chirp_devel] [PATCH] [IC-T8A] Fix frequency encoding and decoding. Fixes #577
by Tom Hayward 05 May '16

05 May '16

# HG changeset patch # User Tom Hayward <tom(a)tomh.us> # Date 1462411076 25200 # Wed May 04 18:17:56 2016 -0700 # Node ID edcad67aca5154dddce0813302eacda0b1849131 # Parent 95af553dbb2e2ddea5f6fa70a532cf6f4d2747df [IC-T8A] Fix frequency encoding and decoding. Fixes #577 The IC-T8 stores frequencies in three bcd bytes. The last nibble of these three bytes would naturally be the least significant digit in KHz, but this leaves no way to encode frequencies divisible by 2.5 KHz. To account for this, the IC-T8 deviates from its standard bcd encoding for the final nibble. Instead of the nibble representing 1 KHz, it represents 500 Hz: 0x5 is 2.5 KHz, 0xA is 5 KHz, and so on. This patch implements this encoding and decoding in Chirp. diff -r 95af553dbb2e -r edcad67aca51 chirp/drivers/ict8.py --- a/chirp/drivers/ict8.py Tue May 03 14:44:38 2016 -0700 +++ b/chirp/drivers/ict8.py Wed May 04 18:17:56 2016 -0700 @@ -19,8 +19,8 @@ mem_format = """ struct memory { - bbcd freq[4]; - bbcd offset[2]; + bbcd freq[3]; + bbcd offset[3]; u8 rtone; u8 ctone; }; @@ -48,6 +48,16 @@ TMODES = ["", "", "Tone", "TSQL"] +def _get_freq(bcd_array): + lastnibble = bcd_array[2].get_bits(0x0F) + return (int(bcd_array) - lastnibble) * 1000 + lastnibble * 500 + + +def _set_freq(bcd_array, freq): + bitwise.int_to_bcd(bcd_array, freq / 1000) + bcd_array[2].set_raw(bcd_array[2].get_bits(0xF0) + freq % 10000 / 500) + + @directory.register class ICT8ARadio(icf.IcomCloneModeRadio): """Icom IC-T8A""" @@ -99,8 +109,8 @@ mem.empty = True return mem - mem.freq = int(_mem.freq) * 10 - mem.offset = int(_mem.offset) * 1000 + mem.freq = _get_freq(_mem.freq) + mem.offset = _get_freq(_mem.offset) mem.rtone = chirp_common.TONES[_mem.rtone - 1] mem.ctone = chirp_common.TONES[_mem.ctone - 1] mem.duplex = DUPLEX[_flg.duplex] @@ -123,8 +133,8 @@ _mem.set_raw("\x00" * 8) _flg.set_raw("\x00") - _mem.freq = mem.freq / 10 - _mem.offset = mem.offset / 1000 + _set_freq(_mem.freq, mem.freq) + _set_freq(_mem.offset, mem.offset) _mem.rtone = chirp_common.TONES.index(mem.rtone) + 1 _mem.ctone = chirp_common.TONES.index(mem.ctone) + 1 _flg.duplex = DUPLEX.index(mem.duplex)

1 0

[chirp_devel] [PATCH] [IC-T8A] Add support for reading and writing channel names. Closes #3627
by Tom Hayward 03 May '16

03 May '16

# HG changeset patch # User Tom Hayward <tom(a)tomh.us> # Date 1462311878 25200 # Tue May 03 14:44:38 2016 -0700 # Node ID 98f5a40fa7f21d964706a77d6d882767d773e1d1 # Parent e7747f518dcd7d9636607ab190d9c27a380e7728 [IC-T8A] Add support for reading and writing channel names. Closes #3627 diff -r e7747f518dcd -r 98f5a40fa7f2 chirp/drivers/ict8.py --- a/chirp/drivers/ict8.py Mon Apr 11 21:02:43 2016 -0400 +++ b/chirp/drivers/ict8.py Tue May 03 14:44:38 2016 -0700 @@ -35,6 +35,11 @@ struct memory memory[100]; +#seekto 0x0400; +struct { + char name[4]; +} names[100]; + #seekto 0x0600; struct flags flags[100]; """ @@ -65,7 +70,8 @@ rf.valid_skips = ["", "S"] rf.valid_modes = ["FM"] rf.memory_bounds = (0, 99) - rf.has_name = False + rf.valid_name_length = 4 + rf.valid_characters = chirp_common.CHARSET_UPPER_NUMERIC rf.has_dtcs = False rf.has_dtcs_polarity = False rf.has_tuning_step = False @@ -78,11 +84,13 @@ def get_raw_memory(self, number): return (str(self._memobj.memory[number]) + - str(self._memobj.duptone[number])) + str(self._memobj.names[number]) + + str(self._memobj.flags[number])) def get_memory(self, number): _mem = self._memobj.memory[number] _flg = self._memobj.flags[number] + _name = self._memobj.names[number] mem = chirp_common.Memory() mem.number = number @@ -98,12 +106,15 @@ mem.duplex = DUPLEX[_flg.duplex] mem.tmode = TMODES[_flg.tmode] mem.skip = _flg.skip and "S" or "" + if _name.name.get_raw() != "\xFF\xFF\xFF\xFF": + mem.name = str(_name.name).rstrip() return mem def set_memory(self, mem): _mem = self._memobj.memory[mem.number] _flg = self._memobj.flags[mem.number] + _name = self._memobj.names[mem.number] if mem.empty: _flg.empty = True @@ -119,3 +130,8 @@ _flg.duplex = DUPLEX.index(mem.duplex) _flg.tmode = TMODES.index(mem.tmode) _flg.skip = mem.skip == "S" + + if mem.name: + _name.name = mem.name.ljust(4) + else: + _name.name = "\xFF\xFF\xFF\xFF"

1 0

[chirp_devel] Anytone AT3318UV
by Eric Shattow 26 Apr '16

26 Apr '16

I've got triband ht AT3318UV-E radio hardware to offer in support of a full CHIRP implementation. Yours to keep if you do a full implementation. Reading memories works already by extending the AnyToneTERMN8RRadio class in anytone_ht.py driver. See issue: http://chirp.danplanet.com/issues/3341

1 0

[chirp_devel] Icom F21 and F4011
by Tom Masterson 20 Apr '16

20 Apr '16

Is anyone working on getting the Icom F11-F21 and/or 3011-4011 radios working with chirp? I may take a crack at it is no one else is doing it. Tom

2 1

[chirp_devel] [PATCH] [BTECH] Remove Debug Code
by Jim Unroe 20 Apr '16

20 Apr '16

# HG changeset patch # User Jim Unroe <rock.unroe(a)gmail.com> # Date 1461142142 14400 # Node ID fea47e043d7a573be425bda03105eb66f7a07f26 # Parent 3799714b874df0d42f55ef4b8a21a8da91519979 [BTECH] Remove Debug Code Remove temporary debug code that was accidentally left behing. related to #3015 diff -r 3799714b874d -r fea47e043d7a chirp/drivers/btech.py --- a/chirp/drivers/btech.py Thu Apr 14 14:53:02 2016 -0400 +++ b/chirp/drivers/btech.py Wed Apr 20 04:49:02 2016 -0400 @@ -1342,7 +1342,6 @@ def my_validate(value): value = chirp_common.parse_freq(value) - print value if 180000000 <= value and value < 210000000: msg = ("Can't be between 180.00000-210.00000") raise InvalidValueError(msg)

1 0

[chirp_devel] [PATCH] Add radio alias support
by Dan Smith 15 Apr '16

15 Apr '16

# HG changeset patch # User Dan Smith <dsmith(a)danplanet.com> # Date 1460678120 25200 # Thu Apr 14 16:55:20 2016 -0700 # Node ID 1a0a36bc2a8d9dc6ec08af2dc775d809e62451c8 # Parent c0b5e35b06659d29a3c72c02fb2ee7423dacc100 Add radio alias support This introduces a small class called Alias which defines the identifying attributes of a radio model. Radio inherits from that, and also has a list of ALIASES that can be zero or more of those classes. When we construct the clone box where a user chooses a model, show them all the models, including aliases. #0 diff -r c0b5e35b0665 -r 1a0a36bc2a8d chirp/chirp_common.py --- a/chirp/chirp_common.py Mon Apr 11 22:47:58 2016 -0400 +++ b/chirp/chirp_common.py Thu Apr 14 16:55:20 2016 -0700 @@ -987,13 +987,17 @@ pass -class Radio(object): +class Alias(object): + VENDOR = "Unknown" + MODEL = "Unknown" + VARIANT = "" + + +class Radio(Alias): """Base class for all Radio drivers""" BAUD_RATE = 9600 HARDWARE_FLOW = False - VENDOR = "Unknown" - MODEL = "Unknown" - VARIANT = "" + ALIASES = [] def status_fn(self, status): """Deliver @status to the UI""" diff -r c0b5e35b0665 -r 1a0a36bc2a8d chirp/drivers/uv5r.py --- a/chirp/drivers/uv5r.py Mon Apr 11 22:47:58 2016 -0400 +++ b/chirp/drivers/uv5r.py Thu Apr 14 16:55:20 2016 -0700 @@ -572,8 +572,6 @@ "!@#$%^&*()+-=[]:\";'<>?,./" -# Uncomment this to actually register this radio in CHIRP -(a)directory.register class BaofengUV5R(chirp_common.CloneModeRadio, chirp_common.ExperimentalRadio): """Baofeng UV-5R""" @@ -1571,6 +1569,16 @@ raise +class UV5XAlias(chirp_common.Alias): + VENDOR = "Baofeng" + MODEL = "UV-5X" + + +(a)directory.register +class BaofengUV5RGeneric(BaofengUV5R): + ALIASES = [UV5XAlias] + + @directory.register class BaofengF11Radio(BaofengUV5R): VENDOR = "Baofeng" diff -r c0b5e35b0665 -r 1a0a36bc2a8d chirp/ui/clone.py --- a/chirp/ui/clone.py Mon Apr 11 22:47:58 2016 -0400 +++ b/chirp/ui/clone.py Thu Apr 14 16:55:20 2016 -0700 @@ -13,6 +13,7 @@ # You should have received a copy of the GNU General Public License # along with this program. If not, see <http://www.gnu.org/licenses/>. +import collections import threading import logging import os @@ -72,16 +73,15 @@ return miscwidgets.make_choice([], False) def __make_vendor(self, model): - vendors = {} + vendors = collections.defaultdict(list) for rclass in sorted(directory.DRV_TO_RADIO.values()): if not issubclass(rclass, chirp_common.CloneModeRadio) and \ not issubclass(rclass, chirp_common.LiveRadio): continue - if rclass.VENDOR not in vendors: - vendors[rclass.VENDOR] = [] - vendors[rclass.VENDOR].append(rclass) + for alias in rclass.ALIASES: + vendors[alias.VENDOR].append(alias) self.__vendors = vendors @@ -187,6 +187,17 @@ if rclass.MODEL == model: cs.radio_class = rclass break + alias_match = None + for alias in rclass.ALIASES: + if alias.MODEL == model: + alias_match = rclass + break + if alias_match: + cs.radio_class = rclass + LOG.debug( + 'Chose %s alias for %s because model %s selected' % ( + alias_match, cs.radio_class, model)) + break if not cs.radio_class: common.show_error( _("Internal error: Unable to upload to {model}").format(

2 2

[chirp_devel] What is the policy about radio clones being NOT listed by it's own brand/model?
by Pavel Milanes (CO7WT) 14 Apr '16

14 Apr '16

Ho to all, What is the policy about radio clones being NOT listed by it's own brand/model? Scenario: A new user must come to Chirp because some friend told him about it, and that Chirp support his Baofeng "X" radio, he come into Chirp's web page and his mind only search for the "download" link: "got it" Downloading... installing... opening. WTF! My radio is not listed. Call/email to the friend, search the internet /{time wasted and user confused}/ just to know that his radio is not *directly* listed in the software: it must use the model Z from Baofeng. Sure, users "has" to read the front page for the Chirp's site to realize that, but... It's only me thinking this is wrong? The actual situation with the Baofeng is a weekly issue on the site/email list. And now I have a issue with the "mobile Baofengs" aka BTECHS and family. Actually the JetStream JT2705M is supported but not listed directly on chirp, in the page it's showed as a clone of the QYT KT-UV980, but a user may be confused by this. The Juentai JT-6188 Mini is also in the same case (listed as a clone of the QYT KT8900), but it's getting more complicated; now I may have found a new variant for it (and entire new radio with it's own ids) and Juentai also released the JT-6188 Plus, and dealers in internet keep saying just JT-6188 confusing users... I have changed the supported models wiki page to show Juentai JT-6188 *Mini *to avoid confusion. Now the question: It's correct/safe to just create adn register a class for this clones by instantiating the correct class but overriding the vendor/model? I think this will help the users a lot, and it's a simple hack, also applicable to the baofengs... 73 Pavel CO7WT

3 2

[chirp_devel] [PATCH][BTECH] Add support for the Sainsonic GT-890, fixes #3533
by Pavel Milanes (CO7WT) 14 Apr '16

14 Apr '16

Add the Sainsonic GT-890 to the btech driver, also related to #3015 73 Pavel CO7WT

1 0

[chirp_devel] [PATCH][BTECH UV-2501+220] Add a new generation of this radios, fixes #3527
by Pavel Milanes (CO7WT) 14 Apr '16

14 Apr '16

A new variant or generation for the BTECH UV-2501+220 was found, this has new ID. Also cleaning of some comments out of place now. This is related to #3015 also 73 Pavel CO7WT

1 0