- Developers - lists.chirpmyradio.com

[chirp_devel] [PATCH] PEP8 cleanup for Alinco driver
by Jim Unroe 18 Dec '16

18 Dec '16

# HG changeset patch # User Jim Unroe <rock.unroe(a)gmail.com> # Date 1482101562 18000 # Node ID 7f4f84adc8b918844ee42953955501b253db1ea4 # Parent d676300e640f1b86d655ddf143fcd4797f38f22c PEP8 cleanup for Alinco driver This patch resolves the issues that are causing the Alinco driver to be flagged as needing a bit of PEP8 cleanup. #4315 diff -r d676300e640f -r 7f4f84adc8b9 chirp/drivers/alinco.py --- a/chirp/drivers/alinco.py Sun Dec 18 16:41:02 2016 -0500 +++ b/chirp/drivers/alinco.py Sun Dec 18 17:52:42 2016 -0500 @@ -592,6 +592,7 @@ } memory[1000]; """ + @directory.register class AlincoDJG7EG(AlincoStyleRadio): """Alinco DJ-G7EG""" @@ -600,12 +601,14 @@ BAUD_RATE = 57600 # Those are different from the other Alinco radios. - STEPS = [5.0, 6.25, 8.33, 10.0, 12.5, 15.0, 20.0, 25.0, 30.0, 50.0, 100.0, 125.0, 150.0, 200.0, 500.0, 1000.0] + STEPS = [5.0, 6.25, 8.33, 10.0, 12.5, 15.0, 20.0, 25.0, 30.0, 50.0, + 100.0, 125.0, 150.0, 200.0, 500.0, 1000.0] DUPLEX = ["", "+", "-"] MODES = ["NFM", "FM", "AM", "WFM"] TMODES = ["", "??1", "Tone", "TSQL", "TSQL-R", "DTCS"] - _model = "AL~DJ-G7EG" # This is a bit of a hack to avoid overwriting _identify() + # This is a bit of a hack to avoid overwriting _identify() + _model = "AL~DJ-G7EG" _memsize = 0x1a7c0 _range = [(500000, 1300000000)] @@ -613,7 +616,7 @@ rf = chirp_common.RadioFeatures() rf.has_dtcs_polarity = False rf.has_bank = False - rf.has_settings = False + rf.has_settings = False rf.valid_modes = self.MODES rf.valid_tmodes = ["", "Tone", "TSQL", "Cross", "TSQL-R", "DTCS"] @@ -715,7 +718,8 @@ mem.tuning_step = self.STEPS[_mem.step] mem.offset = int(_mem.offset) mem.duplex = self.DUPLEX[_mem.duplex] - if self.TMODES[_mem.squelch_type] == "TSQL" and _mem.tx_tone != _mem.rx_tone: + if self.TMODES[_mem.squelch_type] == "TSQL" and \ + _mem.tx_tone != _mem.rx_tone: mem.tmode = "Cross" mem.cross_mode = "Tone->Tone" else: @@ -733,7 +737,7 @@ # Get a low-level memory object mapped to the image _mem = self._memobj.memory[mem.number] if mem.empty: - _mem.unknown = 0x00 # Maybe 0 is empty, 2 is used? + _mem.unknown = 0x00 # Maybe 0 is empty, 2 is used? else: _mem.unknown = 0x02 _mem.freq = mem.freq @@ -746,34 +750,35 @@ try: _mem.tx_tone = ALINCO_TONES.index(mem.rtone)+1 except ValueError: - raise errors.UnsupportedToneError("This radio does not support " + - "tone %.1fHz" % mem.rtone) + raise errors.UnsupportedToneError( + "This radio does not support tone %.1fHz" % mem.rtone) try: _mem.rx_tone = ALINCO_TONES.index(mem.ctone)+1 except ValueError: - raise errors.UnsupportedToneError("This radio does not support " + - "tone %.1fHz" % mem.ctone) + raise errors.UnsupportedToneError( + "This radio does not support tone %.1fHz" % mem.ctone) elif mem.tmode == "TSQL": _mem.squelch_type = self.TMODES.index("TSQL") - # Note how the same TSQL tone is copied to both memory locaations + # Note how the same TSQL tone is copied to both memory + # locaations try: _mem.tx_tone = ALINCO_TONES.index(mem.ctone)+1 _mem.rx_tone = ALINCO_TONES.index(mem.ctone)+1 except ValueError: - raise errors.UnsupportedToneError("This radio does not support " + - "tone %.1fHz" % mem.ctone) + raise errors.UnsupportedToneError( + "This radio does not support tone %.1fHz" % mem.ctone) else: _mem.squelch_type = self.TMODES.index(mem.tmode) try: _mem.tx_tone = ALINCO_TONES.index(mem.rtone)+1 except ValueError: - raise errors.UnsupportedToneError("This radio does not support " + - "tone %.1fHz" % mem.rtone) + raise errors.UnsupportedToneError( + "This radio does not support tone %.1fHz" % mem.rtone) try: _mem.rx_tone = ALINCO_TONES.index(mem.ctone)+1 except ValueError: - raise errors.UnsupportedToneError("This radio does not support " + - "tone %.1fHz" % mem.ctone) + raise errors.UnsupportedToneError( + "This radio does not support tone %.1fHz" % mem.ctone) _mem.dcs = DCS_CODES[self.VENDOR].index(mem.dtcs) _mem.skip = (mem.skip == "S") - _mem.name = "\x00".join(mem.name).ljust(32,"\x00") + _mem.name = "\x00".join(mem.name).ljust(32, "\x00")

1 0

[chirp_devel] [PATCH] [NC-630A] Driver Cleanup
by Jim Unroe 18 Dec '16

18 Dec '16

# HG changeset patch # User Jim Unroe <rock.unroe(a)gmail.com> # Date 1482097262 18000 # Node ID d676300e640f1b86d655ddf143fcd4797f38f22c # Parent cf61dc3ea521895628254b7017225d5657e28adb [NC-630A] Driver Cleanup This cleans up some pep8 errors that I must have missed when testing. There are otherwise no changes to the driver. Related to #4235 diff -r cf61dc3ea521 -r d676300e640f chirp/drivers/kyd.py --- a/chirp/drivers/kyd.py Sun Dec 18 16:02:59 2016 -0500 +++ b/chirp/drivers/kyd.py Sun Dec 18 16:41:02 2016 -0500 @@ -209,6 +209,7 @@ VENDOR = "Plant-Tours" MODEL = "MT-700" + @directory.register class NC630aRadio(chirp_common.CloneModeRadio): """KYD NC-630A""" @@ -509,7 +510,7 @@ # testing model fingerprint if filedata[0x01B8:0x01BE] == cls._fileid: - match_model = True + match_model = True if match_size and match_model: return True

1 0

[chirp_devel] [PATCH] [RT1] Add Support for Retevis RT1
by Jim Unroe 18 Dec '16

18 Dec '16

# HG changeset patch # User Jim Unroe <rock.unroe(a)gmail.com> # Date 1482094979 18000 # Node ID cf61dc3ea521895628254b7017225d5657e28adb # Parent 19790fa1d51a5183b7dd6758c9fbb6c5d5a0bd4b [RT1] Add Support for Retevis RT1 This patch adds CHIRP support for programming both the VHF and UHF models of the Retevis RT1 handheld radios. #4313 diff -r 19790fa1d51a -r cf61dc3ea521 chirp/drivers/retevis_rt1.py --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/chirp/drivers/retevis_rt1.py Sun Dec 18 16:02:59 2016 -0500 @@ -0,0 +1,748 @@ +# Copyright 2016 Jim Unroe <rock.unroe(a)gmail.com> +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +import time +import os +import struct +import logging + +from chirp import chirp_common, directory, memmap +from chirp import bitwise, errors, util +from chirp.settings import RadioSetting, RadioSettingGroup, \ + RadioSettingValueInteger, RadioSettingValueList, \ + RadioSettingValueBoolean, RadioSettingValueString, \ + InvalidValueError, RadioSettings + +LOG = logging.getLogger(__name__) + +MEM_FORMAT = """ +#seekto 0x0010; +struct { + lbcd rxfreq[4]; + lbcd txfreq[4]; + lbcd rxtone[2]; + lbcd txtone[2]; + u8 bcl:1, // Busy Lock + epilogue:1, // Epilogue (STE) + scramble:1, // Scramble + compander:1, // Compander + skip:1, // Scan Add + wide:1, // Bandwidth + unknown1:1, + highpower:1; // Power Level + u8 unknown2[3]; +} memory[16]; + +#seekto 0x0120; +struct { + u8 hivoltnotx:1, // TX Inhibit when voltage too high + lovoltnotx:1, // TX Inhibit when voltage too low + unknown1:1, + alarm:1, // Incept Alarm + scan:1, // Scan + tone:1, // Tone + voice:2; // Voice + u8 unknown2:1, + ssave:3, // Super Battery Save + unknown3:1, + save:3; // Battery Save + u8 squelch; // Squelch + u8 tot; // Time Out Timer + u8 voxi:1, // VOX Inhibit on Receive + voxd:2, // VOX Delay + voxc:1, // VOX Control + voxg:4; // VOX Gain + u8 unknown4:4, + scanspeed:4; // Scan Speed + u8 unknown5:3, + scandelay:5; // Scan Delay + u8 unknown6:3, + prioritych:5; // Priority Channel + u8 k1shortp; // Key 1 Short Press + u8 k2shortp; // Key 2 Short Press + u8 k1longp; // Key 1 Long Press + u8 k2longp; // Key 2 Long Press + u8 lpt; // Long Press Time +} settings; + +#seekto 0x0170; +struct { + char fp[8]; +} fingerprint; +""" + +CMD_ACK = "\x06" + +RT1_POWER_LEVELS = [chirp_common.PowerLevel("Low", watts=5.00), + chirp_common.PowerLevel("High", watts=9.00)] + +RT1_DTCS = sorted(chirp_common.DTCS_CODES + [645]) + +LIST_LPT = ["0.5", "1.0", "1.5", "2.0", "2.5"] +LIST_SHORT_PRESS = ["Off", "Monitor On/Off", "Power High/Low", "Alarm", "Volt"] +LIST_LONG_PRESS = ["Off", "Monitor On/Off", "Monitor(momentary)", + "Power High/Low", "Alarm", "Volt", "TX 1750 Hz"] +LIST_VOXDELAY = ["0.5", "1.0", "2.0", "3.0"] +LIST_VOICE = ["Off", "English", "Chinese"] +LIST_TIMEOUTTIMER = ["Off"] + ["%s" % x for x in range(30, 330, 30)] +LIST_SAVE = ["Off", "1:1", "1:2", "1:3", "1:4"] +LIST_SSAVE = ["Off"] + ["%s" % x for x in range(1, 7)] +LIST_PRIORITYCH = ["Off"] + ["%s" % x for x in range(1, 17)] +LIST_SCANSPEED = ["%s" % x for x in range(100, 550, 50)] +LIST_SCANDELAY = ["%s" % x for x in range(3, 31)] + +SETTING_LISTS = { + "lpt": LIST_LPT, + "k1shortp": LIST_SHORT_PRESS, + "k1longp": LIST_LONG_PRESS, + "k2shortp": LIST_SHORT_PRESS, + "k2longp": LIST_LONG_PRESS, + "voxd": LIST_VOXDELAY, + "voice": LIST_VOICE, + "tot": LIST_TIMEOUTTIMER, + "save": LIST_SAVE, + "ssave": LIST_SSAVE, + "prioritych": LIST_PRIORITYCH, + "scanspeed": LIST_SCANSPEED, + "scandelay": LIST_SCANDELAY, + } + +# Retevis RT1 fingerprints +RT1_VHF_fp = "PXT8K" + "\xF0\x00\x00" # RT1 VHF model +RT1_UHF_fp = "PXT8K" + "\xF3\x00\x00" # RT1 UHF model + +MODELS = [RT1_VHF_fp, RT1_UHF_fp] + + +def _model_from_data(data): + return data[0x0170:0x0178] + + +def _model_from_image(radio): + return _model_from_data(radio.get_mmap()) + + +def _get_radio_model(radio): + block = _rt1_read_block(radio, 0x0170, 0x10) + version = block[0:8] + return version + + +def _rt1_enter_programming_mode(radio): + serial = radio.pipe + + magic = ["PROGRAMa", "PROGRAMb"] + for i in range(0, 2): + + try: + LOG.debug("sending " + magic[i]) + serial.write(magic[i]) + ack = serial.read(1) + except: + _rt1_exit_programming_mode(radio) + raise errors.RadioError("Error communicating with radio") + + if not ack: + _rt1_exit_programming_mode(radio) + raise errors.RadioError("No response from radio") + elif ack != CMD_ACK: + LOG.debug("Incorrect response, got this:\n\n" + util.hexprint(ack)) + _rt1_exit_programming_mode(radio) + raise errors.RadioError("Radio refused to enter programming mode") + + try: + LOG.debug("sending " + util.hexprint("\x02")) + serial.write("\x02") + ident = serial.read(16) + except: + _rt1_exit_programming_mode(radio) + raise errors.RadioError("Error communicating with radio") + + if not ident.startswith("PXT8K"): + LOG.debug("Incorrect response, got this:\n\n" + util.hexprint(ident)) + _rt1_exit_programming_mode(radio) + LOG.debug(util.hexprint(ident)) + raise errors.RadioError("Radio returned unknown identification string") + + try: + LOG.debug("sending " + util.hexprint("MXT8KCUMHS1X7BN/")) + serial.write("MXT8KCUMHS1X7BN/") + ack = serial.read(1) + except: + _rt1_exit_programming_mode(radio) + raise errors.RadioError("Error communicating with radio") + + if ack != "\xB2": + LOG.debug("Incorrect response, got this:\n\n" + util.hexprint(ack)) + _rt1_exit_programming_mode(radio) + raise errors.RadioError("Radio refused to enter programming mode") + + try: + LOG.debug("sending " + util.hexprint(CMD_ACK)) + serial.write(CMD_ACK) + ack = serial.read(1) + except: + _rt1_exit_programming_mode(radio) + raise errors.RadioError("Error communicating with radio") + + if ack != CMD_ACK: + LOG.debug("Incorrect response, got this:\n\n" + util.hexprint(ack)) + _rt1_exit_programming_mode(radio) + raise errors.RadioError("Radio refused to enter programming mode") + + # DEBUG + LOG.info("Positive ident, this is a %s %s" % (radio.VENDOR, radio.MODEL)) + + +def _rt1_exit_programming_mode(radio): + serial = radio.pipe + try: + serial.write("E") + except: + raise errors.RadioError("Radio refused to exit programming mode") + + +def _rt1_read_block(radio, block_addr, block_size): + serial = radio.pipe + + cmd = struct.pack(">cHb", 'R', block_addr, block_size) + expectedresponse = "W" + cmd[1:] + LOG.debug("Reading block %04x..." % (block_addr)) + + try: + serial.write(cmd) + + response = serial.read(4 + block_size) + if response[:4] != expectedresponse: + _rt1_exit_programming_mode(radio) + raise Exception("Error reading block %04x." % (block_addr)) + + block_data = response[4:] + + serial.write(CMD_ACK) + ack = serial.read(1) + except: + _rt1_exit_programming_mode(radio) + raise errors.RadioError("Failed to read block at %04x" % block_addr) + + if ack != CMD_ACK: + _rt1_exit_programming_mode(radio) + raise Exception("No ACK reading block %04x." % (block_addr)) + + return block_data + + +def _rt1_write_block(radio, block_addr, block_size): + serial = radio.pipe + + cmd = struct.pack(">cHb", 'W', block_addr, block_size) + data = radio.get_mmap()[block_addr:block_addr + block_size] + + LOG.debug("Writing Data:") + LOG.debug(util.hexprint(cmd + data)) + + try: + serial.write(cmd + data) + if serial.read(1) != CMD_ACK: + raise Exception("No ACK") + except: + _rt1_exit_programming_mode(radio) + raise errors.RadioError("Failed to send block " + "to radio at %04x" % block_addr) + + +def do_download(radio): + LOG.debug("download") + _rt1_enter_programming_mode(radio) + + data = "" + + status = chirp_common.Status() + status.msg = "Cloning from radio" + + status.cur = 0 + status.max = radio._memsize + + for addr in range(0, radio._memsize, radio._block_size): + status.cur = addr + radio._block_size + radio.status_fn(status) + + block = _rt1_read_block(radio, addr, radio._block_size) + data += block + + LOG.debug("Address: %04x" % addr) + LOG.debug(util.hexprint(block)) + + _rt1_exit_programming_mode(radio) + + return memmap.MemoryMap(data) + + +def do_upload(radio): + status = chirp_common.Status() + status.msg = "Uploading to radio" + + _rt1_enter_programming_mode(radio) + + image_model = _model_from_image(radio) + LOG.info("Image Version is %s" % repr(image_model)) + + radio_model = _get_radio_model(radio) + LOG.info("Radio Version is %s" % repr(radio_model)) + + bands = ["VHF", "UHF"] + image_band = radio_band = "unknown" + for i in range(0,2): + if image_model == MODELS[i]: + image_band = bands[i] + if radio_model == MODELS[i]: + radio_band = bands[i] + + if image_model != radio_model: + _rt1_exit_programming_mode(radio) + msg = ("The upload was stopped because the band supported by " + "the image (%s) does not match the band supported by " + "the radio (%s).") + raise errors.RadioError(msg % (image_band, radio_band)) + + status.cur = 0 + status.max = 0x0190 + + for start_addr, end_addr, block_size in radio._ranges: + for addr in range(start_addr, end_addr, block_size): + status.cur = addr + block_size + radio.status_fn(status) + _rt1_write_block(radio, addr, block_size) + + _rt1_exit_programming_mode(radio) + + +def model_match(cls, data): + """Match the opened/downloaded image to the correct version""" + rid = data[0x0170:0x0176] + + return rid.startswith("PXT8K") + + +(a)directory.register +class RT1Radio(chirp_common.CloneModeRadio): + """Retevis RT1""" + VENDOR = "Retevis" + MODEL = "RT1" + BAUD_RATE = 2400 + + _ranges = [ + (0x0000, 0x0190, 0x10), + ] + _memsize = 0x0400 + _block_size = 0x10 + _vhf_range = (134000000, 175000000) + _uhf_range = (400000000, 521000000) + + def get_features(self): + rf = chirp_common.RadioFeatures() + rf.has_settings = True + rf.has_bank = False + rf.has_ctone = True + rf.has_cross = True + rf.has_rx_dtcs = True + rf.has_tuning_step = False + rf.can_odd_split = True + rf.has_name = False + rf.valid_skips = ["", "S"] + rf.valid_tmodes = ["", "Tone", "TSQL", "DTCS", "Cross"] + rf.valid_cross_modes = ["Tone->Tone", "Tone->DTCS", "DTCS->Tone", + "->Tone", "->DTCS", "DTCS->", "DTCS->DTCS"] + rf.valid_power_levels = RT1_POWER_LEVELS + rf.valid_duplexes = ["", "-", "+", "split", "off"] + rf.valid_modes = ["NFM", "FM"] # 12.5 KHz, 25 kHz. + rf.memory_bounds = (1, 16) + if self._my_band() == RT1_VHF_fp: + rf.valid_bands = [self._vhf_range] + elif self._my_band() == RT1_UHF_fp: + rf.valid_bands = [self._uhf_range] + else: + rf.valid_bands = [self._vhf_range, + self._uhf_range] + + return rf + + def process_mmap(self): + self._memobj = bitwise.parse(MEM_FORMAT, self._mmap) + + def sync_in(self): + self._mmap = do_download(self) + self.process_mmap() + + def sync_out(self): + do_upload(self) + + def get_raw_memory(self, number): + return repr(self._memobj.memory[number - 1]) + + def decode_tone(self, val): + """Parse the tone data to decode from mem, it returns: + Mode (''|DTCS|Tone), Value (None|###), Polarity (None,N,R)""" + if val.get_raw() == "\xFF\xFF": + return '', None, None + + val = int(val) + if val >= 12000: + a = val - 12000 + return 'DTCS', a, 'R' + elif val >= 8000: + a = val - 8000 + return 'DTCS', a, 'N' + else: + a = val / 10.0 + return 'Tone', a, None + + def encode_tone(self, memval, mode, value, pol): + """Parse the tone data to encode from UI to mem""" + if mode == '': + memval[0].set_raw(0xFF) + memval[1].set_raw(0xFF) + elif mode == 'Tone': + memval.set_value(int(value * 10)) + elif mode == 'DTCS': + flag = 0x80 if pol == 'N' else 0xC0 + memval.set_value(value) + memval[1].set_bits(flag) + else: + raise Exception("Internal error: invalid mode `%s'" % mode) + + def _my_band(self): + model_tag = _model_from_image(self) + return model_tag + + def get_memory(self, number): + _mem = self._memobj.memory[number - 1] + + mem = chirp_common.Memory() + + mem.number = number + mem.freq = int(_mem.rxfreq) * 10 + + # We'll consider any blank (i.e. 0MHz frequency) to be empty + if mem.freq == 0: + mem.empty = True + return mem + + if _mem.rxfreq.get_raw() == "\xFF\xFF\xFF\xFF": + mem.freq = 0 + mem.empty = True + return mem + + if int(_mem.rxfreq) == int(_mem.txfreq): + mem.duplex = "" + mem.offset = 0 + else: + mem.duplex = int(_mem.rxfreq) > int(_mem.txfreq) and "-" or "+" + mem.offset = abs(int(_mem.rxfreq) - int(_mem.txfreq)) * 10 + + mem.mode = _mem.wide and "FM" or "NFM" + + rxtone = txtone = None + txtone = self.decode_tone(_mem.txtone) + rxtone = self.decode_tone(_mem.rxtone) + chirp_common.split_tone_decode(mem, txtone, rxtone) + + mem.power = RT1_POWER_LEVELS[_mem.highpower] + + if _mem.skip: + mem.skip = "S" + + mem.extra = RadioSettingGroup("Extra", "extra") + + rs = RadioSetting("bcl", "BCL", + RadioSettingValueBoolean(not _mem.bcl)) + mem.extra.append(rs) + + rs = RadioSetting("epilogue", "Epilogue(STE)", + RadioSettingValueBoolean(not _mem.epilogue)) + mem.extra.append(rs) + + rs = RadioSetting("compander", "Compander", + RadioSettingValueBoolean(not _mem.compander)) + mem.extra.append(rs) + + rs = RadioSetting("scramble", "Scramble", + RadioSettingValueBoolean(not _mem.scramble)) + mem.extra.append(rs) + + return mem + + def set_memory(self, mem): + _mem = self._memobj.memory[mem.number - 1] + + if mem.empty: + _mem.set_raw("\xFF" * (_mem.size() / 8)) + return + + _mem.rxfreq = mem.freq / 10 + + if mem.duplex == "off": + for i in range(0, 4): + _mem.txfreq[i].set_raw("\xFF") + elif mem.duplex == "split": + _mem.txfreq = mem.offset / 10 + elif mem.duplex == "+": + _mem.txfreq = (mem.freq + mem.offset) / 10 + elif mem.duplex == "-": + _mem.txfreq = (mem.freq - mem.offset) / 10 + else: + _mem.txfreq = mem.freq / 10 + + _mem.wide = mem.mode == "FM" + + ((txmode, txtone, txpol), (rxmode, rxtone, rxpol)) = \ + chirp_common.split_tone_encode(mem) + self.encode_tone(_mem.txtone, txmode, txtone, txpol) + self.encode_tone(_mem.rxtone, rxmode, rxtone, rxpol) + + _mem.highpower = mem.power == RT1_POWER_LEVELS[1] + + _mem.skip = mem.skip == "S" + + for setting in mem.extra: + setattr(_mem, setting.get_name(), not int(setting.value)) + + def get_settings(self): + _settings = self._memobj.settings + basic = RadioSettingGroup("basic", "Basic Settings") + top = RadioSettings(basic) + + rs = RadioSetting("lpt", "Long Press Time[s]", + RadioSettingValueList( + LIST_LPT, + LIST_LPT[_settings.lpt])) + basic.append(rs) + + if _settings.k1shortp > 4: + val = 1 + else: + val = _settings.k1shortp + rs = RadioSetting("k1shortp", "Key 1 Short Press", + RadioSettingValueList( + LIST_SHORT_PRESS, + LIST_SHORT_PRESS[val])) + basic.append(rs) + + if _settings.k1longp > 6: + val = 3 + else: + val = _settings.k1longp + rs = RadioSetting("k1longp", "Key 1 Long Press", + RadioSettingValueList( + LIST_LONG_PRESS, + LIST_LONG_PRESS[val])) + basic.append(rs) + + if _settings.k2shortp > 4: + val = 4 + else: + val = _settings.k2shortp + rs = RadioSetting("k2shortp", "Key 2 Short Press", + RadioSettingValueList( + LIST_SHORT_PRESS, + LIST_SHORT_PRESS[val])) + basic.append(rs) + + if _settings.k2longp > 6: + val = 4 + else: + val = _settings.k2longp + rs = RadioSetting("k2longp", "Key 2 Long Press", + RadioSettingValueList( + LIST_LONG_PRESS, + LIST_LONG_PRESS[val])) + basic.append(rs) + + rs = RadioSetting("voxc", "VOX Control", + RadioSettingValueBoolean(not _settings.voxc)) + basic.append(rs) + + if _settings.voxg > 8: + val = 4 + else: + val = _settings.voxg + 1 + rs = RadioSetting("voxg", "VOX Gain", + RadioSettingValueInteger(1, 9, val)) + basic.append(rs) + + rs = RadioSetting("voxd", "VOX Delay Time", + RadioSettingValueList( + LIST_VOXDELAY, + LIST_VOXDELAY[_settings.voxd])) + basic.append(rs) + + rs = RadioSetting("voxi", "VOX Inhibit on Receive", + RadioSettingValueBoolean(not _settings.voxi)) + basic.append(rs) + + if _settings.squelch > 8: + val = 4 + else: + val = _settings.squelch + rs = RadioSetting("squelch", "Squelch Level", + RadioSettingValueInteger(0, 9, val)) + basic.append(rs) + + if _settings.voice == 3: + val = 1 + else: + val = _settings.voice + rs = RadioSetting("voice", "Voice Prompts", + RadioSettingValueList( + LIST_VOICE, + LIST_VOICE[val])) + basic.append(rs) + + rs = RadioSetting("tone", "Tone", + RadioSettingValueBoolean(_settings.tone)) + basic.append(rs) + + rs = RadioSetting("lovoltnotx", "TX Inhibit (when battery < 6 volts)", + RadioSettingValueBoolean(_settings.lovoltnotx)) + basic.append(rs) + + rs = RadioSetting("hivoltnotx", "TX Inhibit (when battery > 9 volts)", + RadioSettingValueBoolean(_settings.hivoltnotx)) + basic.append(rs) + + if _settings.tot > 10: + val = 6 + else: + val = _settings.tot + rs = RadioSetting("tot", "Time-out Timer[s]", + RadioSettingValueList( + LIST_TIMEOUTTIMER, + LIST_TIMEOUTTIMER[val])) + basic.append(rs) + + if _settings.save < 3: + val = 0 + else: + val = _settings.save - 3 + rs = RadioSetting("save", "Battery Saver", + RadioSettingValueList( + LIST_SAVE, + LIST_SAVE[val])) + basic.append(rs) + + rs = RadioSetting("ssave", "Super Battery Saver[s]", + RadioSettingValueList( + LIST_SSAVE, + LIST_SSAVE[_settings.ssave])) + basic.append(rs) + + rs = RadioSetting("alarm", "Incept Alarm", + RadioSettingValueBoolean(_settings.alarm)) + basic.append(rs) + + rs = RadioSetting("scan", "Scan Function", + RadioSettingValueBoolean(_settings.scan)) + basic.append(rs) + + if _settings.prioritych > 15: + val = 0 + else: + val = _settings.prioritych + 1 + rs = RadioSetting("prioritych", "Priority Channel", + RadioSettingValueList( + LIST_PRIORITYCH, + LIST_PRIORITYCH[val])) + basic.append(rs) + + if _settings.scanspeed > 8: + val = 4 + else: + val = _settings.scanspeed + rs = RadioSetting("scanspeed", "Scan Speed[ms]", + RadioSettingValueList( + LIST_SCANSPEED, + LIST_SCANSPEED[val])) + basic.append(rs) + + if _settings.scandelay > 27: + val = 12 + else: + val = _settings.scandelay + rs = RadioSetting("scandelay", "Scan Droupout Delay Time[s]", + RadioSettingValueList( + LIST_SCANDELAY, + LIST_SCANDELAY[val])) + basic.append(rs) + + return top + + def set_settings(self, settings): + for element in settings: + if not isinstance(element, RadioSetting): + self.set_settings(element) + continue + else: + try: + if "." in element.get_name(): + bits = element.get_name().split(".") + obj = self._memobj + for bit in bits[:-1]: + obj = getattr(obj, bit) + setting = bits[-1] + else: + obj = self._memobj.settings + setting = element.get_name() + + if setting == "voxc": + setattr(obj, setting, not int(element.value)) + elif setting == "voxg": + setattr(obj, setting, int(element.value) - 1) + elif setting == "voxi": + setattr(obj, setting, not int(element.value)) + elif setting == "voice": + if int(element.value) == 2: + setattr(obj, setting, int(element.value) + 1) + else: + setattr(obj, setting, int(element.value)) + elif setting == "save": + setattr(obj, setting, int(element.value) + 3) + elif setting == "prioritych": + if int(element.value) == 0: + setattr(obj, setting, int(element.value) + 31) + else: + setattr(obj, setting, int(element.value) - 1) + elif element.value.get_mutable(): + LOG.debug("Setting %s = %s" % (setting, element.value)) + setattr(obj, setting, element.value) + except Exception, e: + LOG.debug(element.get_name()) + raise + + @classmethod + def match_model(cls, filedata, filename): + match_size = False + match_model = False + + # testing the file data size + if len(filedata) in [0x0400, ]: + match_size = True + + # testing the model fingerprint + match_model = model_match(cls, filedata) + + if match_size and match_model: + return True + else: + return False

1 0

[chirp_devel] [PATCH] [RT21] Add PF1 Function Key Setting
by Jim Unroe 17 Dec '16

17 Dec '16

# HG changeset patch # User Jim Unroe <rock.unroe(a)gmail.com> # Date 1482027538 18000 # Node ID 19790fa1d51a5183b7dd6758c9fbb6c5d5a0bd4b # Parent 65d5776cef31d2f06101ff2e5463fadbd705eab1 [RT21] Add PF1 Function Key Setting This patch adds the ability to set the PF1 key function of the Retevis RT21. #4139 diff -r 65d5776cef31 -r 19790fa1d51a chirp/drivers/retevis_rt21.py --- a/chirp/drivers/retevis_rt21.py Sat Dec 17 21:10:10 2016 -0500 +++ b/chirp/drivers/retevis_rt21.py Sat Dec 17 21:18:58 2016 -0500 @@ -46,6 +46,12 @@ scramble_type2:4; } memory[16]; +#seekto 0x011D; +struct { + u8 unused:4, + pf1:4; // Programmable Function Key 1 +} keys; + #seekto 0x012C; struct { u8 use_scramble; // Scramble Enable @@ -82,6 +88,8 @@ TOTALERT_LIST = ["Off"] + ["%s seconds" % x for x in range(1, 11)] VOICE_LIST = ["Off", "Chinese", "English"] VOX_LIST = ["OFF"] + ["%s" % x for x in range(1, 17)] +PF1_CHOICES = ["None", "Monitor", "Scan", "Scramble", "Alarm"] +PF1_VALUES = [0x0F, 0x04, 0x06, 0x08, 0x0C] SETTING_LISTS = { "bcl": BCL_LIST, @@ -455,6 +463,7 @@ setattr(_mem, setting.get_name(), setting.value) def get_settings(self): + _keys = self._memobj.keys _settings = self._memobj.settings basic = RadioSettingGroup("basic", "Basic Settings") top = RadioSettings(basic) @@ -497,6 +506,23 @@ VOX_LIST, VOX_LIST[_settings.vox])) basic.append(rs) + def apply_pf1_listvalue(setting, obj): + LOG.debug("Setting value: "+ str(setting.value) + " from list") + val = str(setting.value) + index = PF1_CHOICES.index(val) + val = PF1_VALUES[index] + obj.set_value(val) + + if _keys.pf1 in PF1_VALUES: + idx = PF1_VALUES.index(_keys.pf1) + else: + idx = LIST_DTMF_SPECIAL_VALUES.index(0x04) + rs = RadioSetting("keys.pf1", "PF1 Key Function", + RadioSettingValueList(PF1_CHOICES, + PF1_CHOICES[idx])) + rs.set_apply_callback(apply_pf1_listvalue, _keys.pf1) + basic.append(rs) + return top def set_settings(self, settings): @@ -516,7 +542,10 @@ obj = self._memobj.settings setting = element.get_name() - if setting == "tot": + if element.has_apply_callback(): + LOG.debug("Using apply callback") + element.run_apply_callback() + elif setting == "tot": setattr(obj, setting, int(element.value) + 1) elif element.value.get_mutable(): LOG.debug("Setting %s = %s" % (setting, element.value))

1 0

[chirp_devel] [PATCH] [RT22] Add Support for Luiton LT-316
by Jim Unroe 17 Dec '16

17 Dec '16

# HG changeset patch # User Jim Unroe <rock.unroe(a)gmail.com> # Date 1482019338 18000 # Node ID d7b9756a8083b9e77317865fbd1c0527b33e587d # Parent 670eebb40b785a1537d66a61067d80107d9363bf [RT22] Add Support for Luiton LT-316 This patch adds support for the Luiton LT-316 variant to the retevis_rt22.py driver. Related to #4145 diff -r 670eebb40b78 -r d7b9756a8083 chirp/drivers/retevis_rt22.py --- a/chirp/drivers/retevis_rt22.py Sat Dec 17 18:52:28 2016 -0500 +++ b/chirp/drivers/retevis_rt22.py Sat Dec 17 19:02:18 2016 -0500 @@ -624,3 +624,9 @@ """Zastone ZT-X6""" VENDOR = "Zastone" MODEL = "ZT-X6" + +(a)directory.register +class LT316(RT22Radio): + """Luiton LT-316""" + VENDOR = "LUITON" + MODEL = "LT-316"

1 0

[chirp_devel] [PATCH] [RT22] Add Retries When Initializing Cloning
by Jim Unroe 17 Dec '16

17 Dec '16

# HG changeset patch # User Jim Unroe <rock.unroe(a)gmail.com> # Date 1482018748 18000 # Node ID 670eebb40b785a1537d66a61067d80107d9363bf # Parent b6d25de71e0feb5aed26105b5d5d8edddfcb8b66 [RT22] Add Retries When Initializing Cloning Cloning does not always begin on the initial request. This patch adds the ability to retry up to five times (similar to how the factory software does it). Related to #4145 diff -r b6d25de71e0f -r 670eebb40b78 chirp/drivers/retevis_rt22.py --- a/chirp/drivers/retevis_rt22.py Wed Dec 07 08:51:18 2016 -0500 +++ b/chirp/drivers/retevis_rt22.py Sat Dec 17 18:52:28 2016 -0500 @@ -97,21 +97,26 @@ serial = radio.pipe magic = "PROGRGS" - try: + exito = False + for i in range(0, 5): for j in range(0, len(magic)): time.sleep(0.005) serial.write(magic[j]) ack = serial.read(1) - except: - _rt22_exit_programming_mode(radio) - raise errors.RadioError("Error communicating with radio") - if not ack: - _rt22_exit_programming_mode(radio) - raise errors.RadioError("No response from radio") - elif ack != CMD_ACK: - _rt22_exit_programming_mode(radio) - raise errors.RadioError("Radio refused to enter programming mode") + try: + if ack == CMD_ACK: + exito = True + break + except: + LOG.debug("Attempt #%s, failed, trying again" % i) + pass + + # check if we had EXITO + if exito is False: + msg = "The radio did not accept program mode after five tries.\n" + msg += "Check you interface cable and power cycle your radio." + raise errors.RadioError(msg) try: serial.write("\x02") @@ -311,11 +316,31 @@ self._memobj = bitwise.parse(MEM_FORMAT, self._mmap) def sync_in(self): - self._mmap = do_download(self) + """Download from radio""" + try: + data = do_download(self) + except errors.RadioError: + # Pass through any real errors we raise + raise + except: + # If anything unexpected happens, make sure we raise + # a RadioError and log the problem + LOG.exception('Unexpected error during download') + raise errors.RadioError('Unexpected error communicating ' + 'with the radio') + self._mmap = data self.process_mmap() def sync_out(self): - do_upload(self) + """Upload to radio""" + try: + do_upload(self) + except: + # If anything unexpected happens, make sure we raise + # a RadioError and log the problem + LOG.exception('Unexpected error during upload') + raise errors.RadioError('Unexpected error communicating ' + 'with the radio') def get_raw_memory(self, number): return repr(self._memobj.memory[number - 1])

1 0

[chirp_devel] Build test results: Successful
by Build System 07 Dec '16

07 Dec '16

Tested changes: [Pavel Milanes (CO7WT) <pavelmc(a)gmail.com>] [PATCH][FD-460UH] New model support for the Feidaxin FD-460UH, fixes #4283 New model Feidaxin FD-460UH with a different identification, despite it can be programmed with the OEM software as a FD-450/460. [Tom Hayward <tom(a)tomh.us>] [id880] Fix typo in charset definition. #281 [Tom Hayward <tom(a)tomh.us>] [thf6a] Support full charset (ASCII). Fixes #141 [Tom Hayward <tom(a)tomh.us>] [id880] Support full charset. Fixes #281 [Tom Hayward <tom(a)tomh.us>] [vx5] Support full charset (ASCII). Fixes #292 [Tom Hayward <tom(a)tomh.us>] [id31a] set used bit when creating new memory, clear when deleting. Fixes #269 [Tom Hayward <tom(a)tomh.us>] Support PyGTK < 2.22 in bank edit. Fixes #231 [Tom Hayward <tom(a)tomh.us>] [d710] [v71] [d72] Fix tone list (not all tones are supported). Fixes #212 [Dan Smith <dsmith(a)danplanet.com>] [vx7] Fix setting memory power levels on 220MHz band Fixes #214 [Dan Smith <dsmith(a)danplanet.com>] fips: Pennsylvania FIPS code was wrong. #117 [Marco Filippi <iz3gme.marco(a)gmail.com>] Consider lower bound frequency of each valid_band as valid Fix bug #181 [Tom Hayward <tom(a)tomh.us>] tmd700: allow 8-char names. Fixes #176 [Dan Smith <dsmith(a)danplanet.com>] Fix the "blind deletion" problem, as well as properly direct copy/paste Fixes #172 [David Griffith <dave(a)661.org>] Bug #155 fix: VX-7 1.25m power levels [David Griffith <dave(a)661.org>] New INSTALL and README files Fixes #122 [Tom Hayward <tom(a)tomh.us>] thd72: only use hardware flow on OS X. Fixes #166 [Marco Filippi <iz3gme.marco(a)gmail.com>] [FT817] Tone freq not set correctly Same as #88 for FT857, to avoid code duplication fix code have been moved from ft857 to its ancestor class Fix bug #163 [Tom Hayward <tom(a)tomh.us>] Fix Mac .app so paths with spaces work. Fixes Bug #145 Full log: Started by an SCM change Building in workspace /var/lib/jenkins/jobs/chirp-test/workspace [workspace] $ hg showconfig paths.default [workspace] $ hg pull --rev default [workspace] $ hg update --clean --rev default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved [workspace] $ hg log --rev . --template {node} [workspace] $ hg log --rev . --template {rev} [workspace] $ hg log --rev bec0ac8db0872d6795514a82acca7957e35d0482 [workspace] $ hg log --template "<changeset node='{node}' author='{author|xmlescape}' rev='{rev}' date='{date}'><msg>{desc|xmlescape}</msg><added>{file_adds|stringify|xmlescape}</added><deleted>{file_dels|stringify|xmlescape}</deleted><files>{files|stringify|xmlescape}</files><parents>{parents}</parents></changeset>\n" --rev default:0 --follow --prune bec0ac8db0872d6795514a82acca7957e35d0482 No emails were triggered. [workspace] $ /bin/sh -xe /tmp/hudson9039643361333267895.sh [workspace] $ /bin/sh -xe /tmp/hudson8199952748715914846.sh + PATH=/usr/bin:/bin:/usr/local/bin ./run_all_tests.sh test_bit_array (tests.unit.test_bitwise.TestBitType) ... ok test_bit_array_fail (tests.unit.test_bitwise.TestBitType) ... ok test_bitfield_u16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_u24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_u8 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_ul16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_ul24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_bbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_lbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_lbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_int_array (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u8 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_char (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string_invalid_chars (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string_wrong_length (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_comment_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok test_comment_inline_cppstyle (tests.unit.test_bitwise.TestBitwiseComments) ... ok test_missing_semicolon (tests.unit.test_bitwise.TestBitwiseErrors) ... ok test_seek (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_seekto (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_struct_one_element (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_two_elements (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_writes (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok split_tone_encode_test_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_none (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_none (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_fix_rounded_step_250 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_500 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_750 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_12_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_2_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_5_0 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_6_25 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_fractional_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step_fail (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_format_freq (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_bad (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_decimal (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whitespace (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whole (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_ensure_has_calls_almost_full (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_empty (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_partial (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full1 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full2 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_urcall_full (tests.unit.test_import_logic.DstarTests) ... ok test_import_bank (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffA_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffB_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_negative (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_too_big_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_uhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_errors (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_warnings (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_invalid (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_am (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_fm (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_name (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_closest (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_dst (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_src (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_same (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffA_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffB_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModelIndexInterface) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_icom_bank (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_index_bounds (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_next_mapping_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_auto_tone_mode_cross (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_pol (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_rx (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tone (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tsql (tests.unit.test_memedit_edits.TestEdits) ... ok test_init (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_bad_portnames (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_sorted (tests.unit.test_platform.Win32PlatformTest) ... ok test_apply_callback (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_group (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_multi (tests.unit.test_settings.TestSettingContainers) ... ok test_changed (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_boolean (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_float (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_integer (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_list (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_string (tests.unit.test_settings.TestSettingValues) ... ok test_validate_callback (tests.unit.test_settings.TestSettingValues) ... ok test_delete_hole_with_all (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_all_full (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_without_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_with_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_without_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok ---------------------------------------------------------------------- Ran 151 tests in 0.059s OK Patch 'tip' is OK Checking for PEP8 regressions... ./chirp/drivers/alinco.py:595:1: E302 expected 2 blank lines, found 1 ./chirp/drivers/alinco.py:603:80: E501 line too long (114 > 79 characters) ./chirp/drivers/alinco.py:608:26: E261 at least two spaces before inline comment ./chirp/drivers/alinco.py:608:80: E501 line too long (84 > 79 characters) ./chirp/drivers/alinco.py:616:26: E222 multiple spaces after operator ./chirp/drivers/alinco.py:718:80: E501 line too long (89 > 79 characters) ./chirp/drivers/alinco.py:736:32: E261 at least two spaces before inline comment ./chirp/drivers/alinco.py:749:80: E501 line too long (86 > 79 characters) ./chirp/drivers/alinco.py:750:47: E128 continuation line under-indented for visual indent ./chirp/drivers/alinco.py:754:80: E501 line too long (86 > 79 characters) ./chirp/drivers/alinco.py:755:47: E128 continuation line under-indented for visual indent ./chirp/drivers/alinco.py:758:80: E501 line too long (81 > 79 characters) ./chirp/drivers/alinco.py:763:80: E501 line too long (86 > 79 characters) ./chirp/drivers/alinco.py:764:47: E128 continuation line under-indented for visual indent ./chirp/drivers/alinco.py:770:80: E501 line too long (86 > 79 characters) ./chirp/drivers/alinco.py:771:47: E128 continuation line under-indented for visual indent ./chirp/drivers/alinco.py:775:80: E501 line too long (86 > 79 characters) ./chirp/drivers/alinco.py:776:47: E128 continuation line under-indented for visual indent ./chirp/drivers/alinco.py:779:55: E231 missing whitespace after ',' ./chirp/drivers/kyd.py:212:1: E302 expected 2 blank lines, found 1 ./chirp/drivers/kyd.py:512:14: E111 indentation is not a multiple of four real 0m7.960s user 0m7.824s sys 0m0.040s ================================================ Tests OK + cat /var/lib/jenkins/.chirp/debug.log [2016-12-07 07:03:16,112] chirp.logger - DEBUG: CHIRP 0.3.0dev on Linux - Ubuntu 16.04.1 LTS (Python 2.7.12) [2016-12-07 07:03:16,150] chirp.directory - INFO: Registered Kenwood_TH-D7 = THD7Radio [2016-12-07 07:03:16,150] chirp.directory - INFO: Registered Kenwood_TH-D7G = THD7GRadio [2016-12-07 07:03:16,150] chirp.directory - INFO: Registered Kenwood_TM-D700 = TMD700Radio [2016-12-07 07:03:16,150] chirp.directory - INFO: Registered Kenwood_TM-V7 = TMV7Radio [2016-12-07 07:03:16,150] chirp.directory - INFO: Registered Kenwood_TM-G707 = TMG707Radio [2016-12-07 07:03:16,150] chirp.directory - INFO: Registered Kenwood_TH-G71 = THG71Radio [2016-12-07 07:03:16,150] chirp.directory - INFO: Registered Kenwood_TH-F6 = THF6ARadio [2016-12-07 07:03:16,150] chirp.directory - INFO: Registered Kenwood_TH-F7 = THF7ERadio [2016-12-07 07:03:16,150] chirp.directory - INFO: Registered Kenwood_TM-D710 = TMD710Radio [2016-12-07 07:03:16,150] chirp.directory - INFO: Registered Kenwood_TH-D72_live_mode = THD72Radio [2016-12-07 07:03:16,150] chirp.directory - INFO: Registered Kenwood_TM-V71 = TMV71Radio [2016-12-07 07:03:16,151] chirp.directory - INFO: Registered Kenwood_TM-D710G = TMD710GRadio [2016-12-07 07:03:16,151] chirp.directory - INFO: Registered Kenwood_TH-K2 = THK2Radio [2016-12-07 07:03:16,151] chirp.directory - INFO: Registered Kenwood_TM-271 = TM271Radio [2016-12-07 07:03:16,151] chirp.directory - INFO: Registered Kenwood_TM-281 = TM281Radio [2016-12-07 07:03:16,151] chirp.directory - INFO: Registered Kenwood_TM-471 = TM471Radio [2016-12-07 07:03:16,151] chirp.directory - INFO: Registered Icom_7200 = Icom7200Radio [2016-12-07 07:03:16,151] chirp.directory - INFO: Registered Icom_IC-7000 = Icom7000Radio [2016-12-07 07:03:16,151] chirp.directory - INFO: Registered Icom_IC-7100 = Icom7100Radio [2016-12-07 07:03:16,151] chirp.directory - INFO: Registered Icom_746 = Icom746Radio [2016-12-07 07:03:16,152] chirp.directory - INFO: Registered Alinco_DR03T = DR03Radio [2016-12-07 07:03:16,152] chirp.directory - INFO: Registered Alinco_DR06T = DR06Radio [2016-12-07 07:03:16,152] chirp.directory - INFO: Registered Alinco_DR135T = DR135Radio [2016-12-07 07:03:16,152] chirp.directory - INFO: Registered Alinco_DR235T = DR235Radio [2016-12-07 07:03:16,152] chirp.directory - INFO: Registered Alinco_DR435T = DR435Radio [2016-12-07 07:03:16,153] chirp.directory - INFO: Registered Alinco_DJ596 = DJ596Radio [2016-12-07 07:03:16,153] chirp.directory - INFO: Registered Jetstream_JT220M = JT220MRadio [2016-12-07 07:03:16,153] chirp.directory - INFO: Registered Alinco_DJ175 = DJ175Radio [2016-12-07 07:03:16,153] chirp.directory - INFO: Registered Alinco_DJ-G7EG = AlincoDJG7EG [2016-12-07 07:03:16,153] chirp.directory - INFO: Registered AnyTone_5888UV = AnyTone5888UVRadio [2016-12-07 07:03:16,153] chirp.directory - INFO: Registered Intek_HR-2040 = IntekHR2040Radio [2016-12-07 07:03:16,153] chirp.directory - INFO: Registered Polmar_DB-50M = PolmarDB50MRadio [2016-12-07 07:03:16,153] chirp.directory - INFO: Registered Powerwerx_DB-750X = PowerwerxDB750XRadio [2016-12-07 07:03:16,154] chirp.directory - INFO: Registered AnyTone_TERMN-8R = AnyToneTERMN8RRadio [2016-12-07 07:03:16,154] chirp.directory - INFO: Registered AnyTone_OBLTR-8R = AnyToneOBLTR8RRadio [2016-12-07 07:03:16,155] chirp.directory - INFO: Registered Baofeng_UV-3R = UV3RRadio [2016-12-07 07:03:16,155] chirp.directory - INFO: Registered Baofeng_BF-A58 = BFA58 [2016-12-07 07:03:16,155] chirp.directory - INFO: Registered Baofeng_UV-82WP = UV82WP [2016-12-07 07:03:16,155] chirp.directory - INFO: Registered Baofeng_GT-3WP = GT3WP [2016-12-07 07:03:16,155] chirp.directory - INFO: Registered Retevis_RT6 = RT6 [2016-12-07 07:03:16,155] chirp.directory - INFO: Registered Baojie_BJ-9900 = BJ9900Radio [2016-12-07 07:03:16,156] chirp.directory - INFO: Registered Baofeng_UV-5R = BaofengUV5RGeneric [2016-12-07 07:03:16,156] chirp.directory - INFO: Registered Baofeng_F-11 = BaofengF11Radio [2016-12-07 07:03:16,156] chirp.directory - INFO: Registered Baofeng_UV-82 = BaofengUV82Radio [2016-12-07 07:03:16,156] chirp.directory - INFO: Registered Baofeng_UV-6 = BaofengUV6Radio [2016-12-07 07:03:16,157] chirp.directory - INFO: Registered Intek_KT-980HP = IntekKT980Radio [2016-12-07 07:03:16,157] chirp.directory - INFO: Registered Baofeng_BF-F8HP = BaofengBFF8HPRadio [2016-12-07 07:03:16,157] chirp.directory - INFO: Registered Baofeng_UV-82HP = BaofengUV82HPRadio [2016-12-07 07:03:16,157] chirp.directory - INFO: Registered Baojie_BJ-UV55 = BaojieBJUV55Radio [2016-12-07 07:03:16,158] chirp.directory - INFO: Registered BTECH_UV-2501 = UV2501 [2016-12-07 07:03:16,158] chirp.directory - INFO: Registered BTECH_UV-2501+220 = UV2501_220 [2016-12-07 07:03:16,158] chirp.directory - INFO: Registered BTECH_UV-5001 = UV5001 [2016-12-07 07:03:16,158] chirp.directory - INFO: Registered WACCOM_MINI-8900 = MINI8900 [2016-12-07 07:03:16,158] chirp.directory - INFO: Registered QYT_KT-UV980 = KTUV980 [2016-12-07 07:03:16,158] chirp.directory - INFO: Registered QYT_KT8900 = KT9800 [2016-12-07 07:03:16,158] chirp.directory - INFO: Registered QYT_KT8900R = KT9800R [2016-12-07 07:03:16,158] chirp.directory - INFO: Registered LUITON_LT-588UV = LT588UV [2016-12-07 07:03:16,159] chirp.directory - INFO: Registered Feidaxin_FD-268A = FD268ARadio [2016-12-07 07:03:16,159] chirp.directory - INFO: Registered Feidaxin_FD-268B = FD268BRadio [2016-12-07 07:03:16,159] chirp.directory - INFO: Registered Feidaxin_FD-288A = FD288ARadio [2016-12-07 07:03:16,159] chirp.directory - INFO: Registered Feidaxin_FD-288B = FD288BRadio [2016-12-07 07:03:16,159] chirp.directory - INFO: Registered Feidaxin_FD-150A = FD150ARadio [2016-12-07 07:03:16,159] chirp.directory - INFO: Registered Feidaxin_FD-160A = FD160ARadio [2016-12-07 07:03:16,159] chirp.directory - INFO: Registered Feidaxin_FD-450A = FD450ARadio [2016-12-07 07:03:16,159] chirp.directory - INFO: Registered Feidaxin_FD-460A = FD460ARadio [2016-12-07 07:03:16,159] chirp.directory - INFO: Registered Feidaxin_FD-460UH = FD460UHRadio [2016-12-07 07:03:16,159] chirp.directory - INFO: Registered Yaesu_FT-1802M = FT1802Radio [2016-12-07 07:03:16,160] chirp.directory - INFO: Registered Yaesu_FT-1D_R = FT1Radio [2016-12-07 07:03:16,160] chirp.directory - INFO: Registered Yaesu_FT-2800M = FT2800Radio [2016-12-07 07:03:16,161] chirp.directory - INFO: Registered Yaesu_FT-2900R_1900R = FT2900Radio [2016-12-07 07:03:16,161] chirp.directory - INFO: Registered Yaesu_FT-50 = FT50Radio [2016-12-07 07:03:16,162] chirp.directory - INFO: Registered Yaesu_FT-60 = FT60Radio [2016-12-07 07:03:16,162] chirp.directory - INFO: Registered Yaesu_FT-7800_7900 = FT7800Radio [2016-12-07 07:03:16,162] chirp.directory - INFO: Registered Yaesu_FT-8800 = FT8800Radio [2016-12-07 07:03:16,162] chirp.directory - INFO: Registered Yaesu_FT-8900 = FT8900Radio [2016-12-07 07:03:16,162] chirp.directory - INFO: Registered Yaesu_FT-8100 = FT8100Radio [2016-12-07 07:03:16,163] chirp.directory - INFO: Registered Yaesu_FT-817 = FT817Radio [2016-12-07 07:03:16,163] chirp.directory - INFO: Registered Yaesu_FT-817ND = FT817NDRadio [2016-12-07 07:03:16,163] chirp.directory - INFO: Registered Yaesu_FT-817ND_US = FT817NDUSRadio [2016-12-07 07:03:16,163] chirp.directory - INFO: Registered Yaesu_FT-857_897 = FT857Radio [2016-12-07 07:03:16,163] chirp.directory - INFO: Registered Yaesu_FT-857_897_US = FT857USRadio [2016-12-07 07:03:16,164] chirp.directory - INFO: Registered Yaesu_FT-90 = FT90Radio [2016-12-07 07:03:16,164] chirp.directory - INFO: Registered Yaesu_FTM-350 = FTM350Radio [2016-12-07 07:03:16,165] chirp.directory - INFO: Registered Generic_CSV = CSVRadio [2016-12-07 07:03:16,165] chirp.directory - INFO: Registered Commander_KG-UV = CommanderCSVRadio [2016-12-07 07:03:16,165] chirp.directory - INFO: Registered RT_Systems_CSV = RTCSVRadio [2016-12-07 07:03:16,165] chirp.directory - INFO: Registered ARRL_Travel_Plus = TpeRadio [2016-12-07 07:03:16,172] chirp.directory - INFO: Registered Generic_XML = XMLRadio [2016-12-07 07:03:16,173] chirp.directory - INFO: Registered BTECH_GMRS-V1 = GMRSV1 [2016-12-07 07:03:16,176] chirp.directory - INFO: Registered Baofeng_BF-888 = H777Radio [2016-12-07 07:03:16,176] chirp.directory - INFO: Registered HobbyPCB_RS-UV3 = HobbyPCBRSUV3Radio [2016-12-07 07:03:16,176] chirp.directory - INFO: Registered Icom_IC-208H = IC208Radio [2016-12-07 07:03:16,177] chirp.directory - INFO: Registered Icom_IC-2100H = IC2100Radio [2016-12-07 07:03:16,177] chirp.directory - INFO: Registered Icom_IC-2200H = IC2200Radio [2016-12-07 07:03:16,177] chirp.directory - INFO: Registered Icom_IC-2720H = IC2720Radio [2016-12-07 07:03:16,177] chirp.directory - INFO: Registered Icom_IC-2820H = IC2820Radio [2016-12-07 07:03:16,178] chirp.directory - INFO: Registered Icom_IC-91_92AD = IC9xRadio [2016-12-07 07:03:16,178] chirp.directory - INFO: Registered Icom_IC-Q7A = ICQ7Radio [2016-12-07 07:03:16,178] chirp.directory - INFO: Registered Icom_IC-T70 = ICT70Radio [2016-12-07 07:03:16,178] chirp.directory - INFO: Registered Icom_IC-T7H = ICT7HRadio [2016-12-07 07:03:16,178] chirp.directory - INFO: Registered Icom_IC-T8A = ICT8ARadio [2016-12-07 07:03:16,179] chirp.directory - INFO: Registered Icom_IC-W32A = ICW32ARadio [2016-12-07 07:03:16,179] chirp.directory - INFO: Registered Icom_IC-W32E = ICW32ERadio [2016-12-07 07:03:16,179] chirp.directory - INFO: Registered Icom_IC-V82_U82 = ICx8xRadio [2016-12-07 07:03:16,179] chirp.directory - INFO: Registered Icom_ID-31A = ID31Radio [2016-12-07 07:03:16,180] chirp.directory - INFO: Registered Icom_ID-51 = ID51Radio [2016-12-07 07:03:16,180] chirp.directory - INFO: Registered Icom_ID-51_Plus = ID51PLUSRadio [2016-12-07 07:03:16,180] chirp.directory - INFO: Registered Icom_ID-800H_v2 = ID800v2Radio [2016-12-07 07:03:16,180] chirp.directory - INFO: Registered Icom_ID-880H = ID880Radio [2016-12-07 07:03:16,180] chirp.directory - INFO: Registered Icom_ID-80H = ID80Radio [2016-12-07 07:03:16,181] chirp.directory - INFO: Registered Kenwood_HMK = HMKRadio [2016-12-07 07:03:16,181] chirp.directory - INFO: Registered Kenwood_ITM = ITMRadio [2016-12-07 07:03:16,181] chirp.directory - INFO: Registered Wouxun_KG-UV8D = KGUV8DRadio [2016-12-07 07:03:16,181] chirp.directory - INFO: Registered KYD_NC-630A = NC630aRadio [2016-12-07 07:03:16,182] chirp.directory - INFO: Registered KYD_IP-620 = IP620Radio [2016-12-07 07:03:16,182] chirp.directory - INFO: Registered Leixen_VV-898 = LeixenVV898Radio [2016-12-07 07:03:16,182] chirp.directory - INFO: Registered Jetstream_JT270M = JetstreamJT270MRadio [2016-12-07 07:03:16,182] chirp.directory - INFO: Registered Jetstream_JT270MH = JetstreamJT270MHRadio [2016-12-07 07:03:16,182] chirp.directory - INFO: Registered Leixen_VV-898S = LeixenVV898SRadio [2016-12-07 07:03:16,183] chirp.directory - INFO: Registered LUITON_LT-725UV = LT725UV [2016-12-07 07:03:16,183] chirp.directory - INFO: Registered Wouxun_KG-UVD1P = KGUVD1PRadio [2016-12-07 07:03:16,183] chirp.directory - INFO: Registered Wouxun_KG-UV6 = KGUV6DRadio [2016-12-07 07:03:16,183] chirp.directory - INFO: Registered Wouxun_KG-816 = KG816Radio [2016-12-07 07:03:16,183] chirp.directory - INFO: Registered Wouxun_KG-818 = KG818Radio [2016-12-07 07:03:16,184] chirp.directory - INFO: Registered Puxing_PX-777 = Puxing777Radio [2016-12-07 07:03:16,184] chirp.directory - INFO: Registered Puxing_PX-2R = Puxing2RRadio [2016-12-07 07:03:16,185] chirp.directory - INFO: Registered Puxing_PX-888K = Puxing_PX888K_Radio [2016-12-07 07:03:16,185] chirp.directory - INFO: Registered Retevis_RT21 = RT21Radio [2016-12-07 07:03:16,186] chirp.directory - INFO: Registered Retevis_RT22 = RT22Radio [2016-12-07 07:03:16,186] chirp.directory - INFO: Registered WLN_KD-C1 = KDC1 [2016-12-07 07:03:16,186] chirp.directory - INFO: Registered Zastone_ZT-X6 = ZTX6 [2016-12-07 07:03:16,186] chirp.directory - INFO: Registered TYT_TH-7800_File = TYTTH7800File [2016-12-07 07:03:16,186] chirp.directory - INFO: Registered TYT_TH-7800 = TYTTH7800Radio [2016-12-07 07:03:16,187] chirp.directory - INFO: Registered TYT_TH9000_220 = Th9000220Radio [2016-12-07 07:03:16,187] chirp.directory - INFO: Registered TYT_TH9000_144 = Th9000144Radio [2016-12-07 07:03:16,187] chirp.directory - INFO: Registered TYT_TH9000_440 = Th9000440Radio [2016-12-07 07:03:16,187] chirp.directory - INFO: Registered TYT_TH-9800_File = TYTTH9800File [2016-12-07 07:03:16,187] chirp.directory - INFO: Registered TYT_TH-9800 = TYTTH9800Radio [2016-12-07 07:03:16,187] chirp.directory - INFO: Registered TYT_TH-UV3R = TYTUV3RRadio [2016-12-07 07:03:16,188] chirp.directory - INFO: Registered TYT_TH-UV3R-25 = TYTUV3R25Radio [2016-12-07 07:03:16,188] chirp.directory - INFO: Registered TYT_TH-UVF8D = TYTUVF8DRadio [2016-12-07 07:03:16,188] chirp.directory - INFO: Registered Kenwood_TH-D72_clone_mode = THD72Radio [2016-12-07 07:03:16,189] chirp.directory - INFO: Registered TYT_TH-UVF1 = TYTTHUVF1Radio [2016-12-07 07:03:16,189] chirp.directory - INFO: Registered Kenwood_TK-260 = TK260_Radio [2016-12-07 07:03:16,189] chirp.directory - INFO: Registered Kenwood_TK-270 = TK270_Radio [2016-12-07 07:03:16,189] chirp.directory - INFO: Registered Kenwood_TK-272 = TK272_Radio [2016-12-07 07:03:16,189] chirp.directory - INFO: Registered Kenwood_TK-278 = TK278_Radio [2016-12-07 07:03:16,189] chirp.directory - INFO: Registered Kenwood_TK-360 = TK360_Radio [2016-12-07 07:03:16,189] chirp.directory - INFO: Registered Kenwood_TK-370 = TK370_Radio [2016-12-07 07:03:16,189] chirp.directory - INFO: Registered Kenwood_TK-372 = TK372_Radio [2016-12-07 07:03:16,190] chirp.directory - INFO: Registered Kenwood_TK-378 = TK378_Radio [2016-12-07 07:03:16,190] chirp.directory - INFO: Registered Kenwood_TK-760 = TK760_Radio [2016-12-07 07:03:16,190] chirp.directory - INFO: Registered Kenwood_TK-762 = TK762_Radio [2016-12-07 07:03:16,190] chirp.directory - INFO: Registered Kenwood_TK-768 = TK768_Radio [2016-12-07 07:03:16,190] chirp.directory - INFO: Registered Kenwood_TK-860 = TK860_Radio [2016-12-07 07:03:16,190] chirp.directory - INFO: Registered Kenwood_TK-862 = TK862_Radio [2016-12-07 07:03:16,190] chirp.directory - INFO: Registered Kenwood_TK-868 = TK868_Radio [2016-12-07 07:03:16,191] chirp.directory - INFO: Registered Kenwood_TK-868G = TK868G_Radios [2016-12-07 07:03:16,191] chirp.directory - INFO: Registered Kenwood_TK-862G = TK862G_Radios [2016-12-07 07:03:16,191] chirp.directory - INFO: Registered Kenwood_TK-860G = TK860G_Radios [2016-12-07 07:03:16,191] chirp.directory - INFO: Registered Kenwood_TK-768G = TK768G_Radios [2016-12-07 07:03:16,191] chirp.directory - INFO: Registered Kenwood_TK-762G = TK762G_Radios [2016-12-07 07:03:16,191] chirp.directory - INFO: Registered Kenwood_TK-760G = TK760G_Radios [2016-12-07 07:03:16,191] chirp.directory - INFO: Registered Kenwood_TK-388G = TK388G_Radios [2016-12-07 07:03:16,191] chirp.directory - INFO: Registered Kenwood_TK-378G = TK378G_Radios [2016-12-07 07:03:16,191] chirp.directory - INFO: Registered Kenwood_TK-372G = TK372G_Radios [2016-12-07 07:03:16,192] chirp.directory - INFO: Registered Kenwood_TK-370G = TK370G_Radios [2016-12-07 07:03:16,192] chirp.directory - INFO: Registered Kenwood_TK-360G = TK360G_Radios [2016-12-07 07:03:16,192] chirp.directory - INFO: Registered Kenwood_TK-278G = TK278G_Radios [2016-12-07 07:03:16,192] chirp.directory - INFO: Registered Kenwood_TK-272G = TK272G_Radios [2016-12-07 07:03:16,192] chirp.directory - INFO: Registered Kenwood_TK-270G = TK270G_Radios [2016-12-07 07:03:16,192] chirp.directory - INFO: Registered Kenwood_TK-260G = TK260G_Radios [2016-12-07 07:03:16,192] chirp.directory - INFO: Registered Kenwood_TK-7102 = KenwoodTK7102Radio [2016-12-07 07:03:16,192] chirp.directory - INFO: Registered Kenwood_TK-8102 = KenwoodTK8102Radio [2016-12-07 07:03:16,192] chirp.directory - INFO: Registered Kenwood_TK-7108 = KenwoodTK7108Radio [2016-12-07 07:03:16,192] chirp.directory - INFO: Registered Kenwood_TK-8108 = KenwoodTK8108Radio [2016-12-07 07:03:16,193] chirp.directory - INFO: Registered Kenwood_TS-2000 = TS2000Radio [2016-12-07 07:03:16,193] chirp.directory - INFO: Registered BTECH_UV-5X3 = UV5X3 [2016-12-07 07:03:16,194] chirp.directory - INFO: Registered Baofeng_UV-6R = UV6R [2016-12-07 07:03:16,194] chirp.directory - INFO: Registered Baofeng_UV-B5 = BaofengUVB5 [2016-12-07 07:03:16,195] chirp.directory - INFO: Registered BTECH_UV-50X3 = UV50X3 [2016-12-07 07:03:16,195] chirp.directory - INFO: Registered Yaesu_VX-170 = VX170Radio [2016-12-07 07:03:16,195] chirp.directory - INFO: Registered Yaesu_VX-2 = VX2Radio [2016-12-07 07:03:16,195] chirp.directory - INFO: Registered Yaesu_VX-3 = VX3Radio [2016-12-07 07:03:16,196] chirp.directory - INFO: Registered Yaesu_VX-5 = VX5Radio [2016-12-07 07:03:16,196] chirp.directory - INFO: Registered Yaesu_VX-6 = VX6Radio [2016-12-07 07:03:16,196] chirp.directory - INFO: Registered Yaesu_VX-7 = VX7Radio [2016-12-07 07:03:16,197] chirp.directory - INFO: Registered Yaesu_VX-8_R = VX8Radio [2016-12-07 07:03:16,197] chirp.directory - INFO: Registered Yaesu_VX-8_DR = VX8DRadio [2016-12-07 07:03:16,197] chirp.directory - INFO: Registered Yaesu_VX-8_GE = VX8GERadio [2016-12-07 07:03:16,197] chirp.directory - INFO: Registered Vertex_Standard_VXA-700 = VXA700Radio Email was triggered for: Success Sending email for trigger: Success

1 0

[chirp_devel] [PATCH][FD-460UH] New model support for the Feidaxin FD-460UH, fixes #4283
by Pavel Milanes Costa 07 Dec '16

07 Dec '16

New model Feidaxin FD-460UH with a different identification, despite it can be programmed with the OEM software as a FD-450/460. 73 Pavel CO7WT.

1 0

[chirp_devel] Question about old Yaesu/Vertex models.
by Pavel Milanes Costa 01 Dec '16

01 Dec '16

Hi, I was very busy the end of the year here... fortunately this December is starting soft and will have the second half of vacations and I plan to add the support for two ancient Yaesu/Vertex models... Yaesu VX-200 and Vertex FTL-1011 (7-6m) & FTL-2011 (2m) I have already started the development of the VX-200 and I think the FTLs are pretty much the same... This old rigs has a confusing designation-brand mix, as FT if for generic Yaesu and it reads Vertex and the other way around the VX-200 uses a Vertex designations but reads Yaesu on the back plate... I think Yaesu/Vertex in that time was loosely used... Since we have a Yaesu and Vextex vendors in Chirp what will be the correct designations of vendors? My guess: * VX-200 as a Vertex as it follow the VX designation and is (was) a commercial HT model (we call it here "the Yaesu brick", google som images and you will know why) despite it does says Yaesu and not Vertex, but in the back plate under the belt clip and not in the front. * FTL-1011/2011 as a Vertex despite the fact that it uses the "FT" designator in the name, this mainly because the radio reads in prominent letters "Vertex" in the front... Any ideas, comments, etc... 73 Pavel CO7WT

2 1

[chirp_devel] Explanation of 2-Tone settings
by Michael Wagner 24 Nov '16

24 Nov '16

Hi, patch http://intrepid.danplanet.com/pipermail/chirp_devel/2016-November/004368.ht… adds 2-Tones for the btech-driver. As I did not use 2-Tone-signalling yet, I implemented and verified the setting just by reverse-engineering the OEM-software (and also used the same labels for all settings), but I do not know what the settings are actually doing and how to test them. Could someone explain me the functionality/meaning of the 2-tone decoding-settings? (respectively give advice for more intuitive labels for the settings? ) 73, Michael

1 1