- Developers - lists.chirpmyradio.com

[chirp_devel] New Driver not registering
by Rick DeWitt 21 Feb '18

21 Feb '18

I have written a driver for the Radio Shack PRO-649 scanner, but it does not register in the directory. I can force it by manually adding the 'rs649' to the __init__.py file, and then it runs perfectly. But why won't it register itself? It is in the \chirp\drivers folder on my Win7 system. Also, does anyone know how to invoke the 'show_instructions' function in the mainapp? I want to provide some configuration hints. I don't find any driver currently using this call. -- Rick DeWitt AA0RD Sequim, Washington, USA 360-681-3494

2 2

[chirp_devel] Patch to address improper treatment of unknown fields for Alinco DJ-G7 (#5275)
by Mathias Weyland 21 Feb '18

21 Feb '18

Hello After quite a bit of debugging I think we nailed it. At the time I was adding support for the DJ-G7 radio, I was not aware of a flag that was used to hide memory channels in the main band. The main band only supports a subset of modes and frequencies on this radio. My original code used this flag improperly, such that a channel was never hidden from the main band regardless of its settings. This does not do any harm to the radio, but such a memory channel is useless in the main band due to hardware constraints. More importantly, the original programming software by Alinco crashes when operating on a memory map pulled from a radio programmed with chirp if the flag is not used correctly. After some discussions with and advice from Emiel, I have completed a patch that adds proper support for this flag. The patch is attached. See #5275 for a more in-depth discussion of the issue. Thank you and best regards Matt

2 2

[chirp_devel] Patch for Issue #5595, new BJ-218 Driver
by Rick DeWitt 21 Feb '18

21 Feb '18

Attached is the first release of the proposed new Baojie BJ-218 driver with full dual-vfo settings. This should probably replace the Luiton Lt725uv, since it declares that radio as an alias of the BJ-218. Related issues: #5595 (this new driver), and #5407, #4645 requests for BJ-218 support. -- Rick DeWitt AA0RD Sequim, Washington, USA 360-681-3494

2 1

[chirp_devel] BJ-218 Driver
by Rick DeWitt 19 Feb '18

19 Feb '18

Ref issue # 5595; attached is the driver file for that patch. Oops.... -- Rick DeWitt AA0RD Sequim, Washington, USA 360-681-3494

1 0

[chirp_devel] CHIRP build, TOX tests on Mac
by Nicolas Pike 18 Feb '18

18 Feb '18

Hi, I installed the standard CHIRP daily build which works fine. I have now installed Mercurial. The CHIRP repo, pip modules for TOX, lxml and serial resolved various errors, and python path issues. python chirp-0.3.0dev.py works When I try and run the box test I get the results below. it seems no CHIRP modules are found and /UNKNOWN-0.0.0.zip can't be right... also nicolass-Mac-mini:tests nicolas$ python run_tests.py Traceback (most recent call last): File "run_tests.py", line 27, in <module> from serial import Serial ImportError: cannot import name Serial What part of the setup have I missed? Any suggestions? Thanks Nicolas nicolass-Mac-mini:chirp.hg nicolas$ tox -e driver -- -d Icom_IC-2820H *GLOB sdist-make: /Users/nicolas/Documents/FT70CHIRP/chirp.hg/setup.py* *driver inst-nodeps: /Users/nicolas/Documents/FT70CHIRP/chirp.hg/.tox/dist/UNKNOWN-0.0.0.zip* ERROR: invocation failed (exit code 1), logfile: /Users/nicolas/Documents/FT70CHIRP/chirp.hg/.tox/driver/log/driver-7.log ERROR: actionid: driver msg: installpkg cmdargs: ['/Users/nicolas/Documents/FT70CHIRP/chirp.hg/.tox/driver/bin/pip', 'install', '-U', '--no-deps', '/Users/nicolas/Documents/FT70CHIRP/chirp.hg/.tox/dist/UNKNOWN-0.0.0.zip'] Processing ./.tox/dist/UNKNOWN-0.0.0.zip Complete output from command python setup.py egg_info: Traceback (most recent call last): File "<string>", line 1, in <module> File "/private/var/folders/yf/rh0gfjk57pzfvdls7z6nwnmr0000gn/T/pip-Ld1kvY-build/setup.py", line 5, in <module> from chirp import CHIRP_VERSION ImportError: No module named chirp ---------------------------------------- Command "python setup.py egg_info" failed with error code 1 in /private/var/folders/yf/rh0gfjk57pzfvdls7z6nwnmr0000gn/T/pip-Ld1kvY-build/ *driver installed: future==0.16.0,iso8601==0.1.12,libxml2-python==2.9.7,lxml==4.1.1,mercurial==4.5,pluggy==0.6.0,py==1.5.2,pycairo==1.15.3,PyYAML==3.12,serial==0.0.38,six==1.11.0,tox==2.9.1,virtualenv==15.1.0* ___________________________________ summary ____________________________________ ERROR: driver: InvocationError: /Users/nicolas/Documents/FT70CHIRP/chirp.hg/.tox/driver/bin/pip install -U --no-deps /Users/nicolas/Documents/FT70CHIRP/chirp.hg/.tox/dist/UNKNOWN-0.0.0.zip (see /Users/nicolas/Documents/FT70CHIRP/chirp.hg/.tox/driver/log/driver-7.log) nicolass-Mac-mini:chirp.hg nicolas$

2 1

[chirp_devel] // FT-70DE New Model #5329 First Alpha, NOT COMPLETE, feedback appreciated. Thanks
by Nicolas Pike 17 Feb '18

17 Feb '18

Hi, Patch attached. FT-70DE New Model #5329 First Alpha, NOT COMPLETE, feedback appreciated. Thanks FT70-DE factory fresh image attached. Feedback please. Thanks. Nicolas

1 0

[chirp_devel] Yaesu FT-70
by Nicolas Pike 14 Feb '18

14 Feb '18

We have been working on the FT-70 driver and now the basics of it going. I would really appreciate a code review/once over of this driver from an experienced CHIRP developer. Just to get on track! Then we can improve/revise as needed prior to submitting a formal request. Your thoughts are appreciated Thanks. Nicolas

2 1

[chirp_devel] Pipe Isochronous Transfers
by Rick DeWitt 12 Feb '18

12 Feb '18

How do I set my radio.pipe.mode to Iscochronous (no handshake) for read? I am working on a driver for the R/S PRO-649 scanner, and it responds to the dump command with a continuous transfer of 4096 bytes. -- Rick DeWitt AA0RD Sequim, Washington, USA 360-681-3494

3 4

[chirp_devel] [PATCH] [MURS-V1] Add Support for BTech MURS-V1
by Jim Unroe 10 Feb '18

10 Feb '18

# HG changeset patch # User Jim Unroe <rock.unroe(a)gmail.com> # Date 1518142657 18000 # Node ID d3c4a417fdf2bb2c33afa27c92887b82d8f8c98a # Parent 96ffc23b6e5e43de0f19e086527302e672043a76 [MURS-V1] Add Support for BTech MURS-V1 This patch adds support for the BTech MURS-V1 handheld radio. #5255 diff -r 96ffc23b6e5e -r d3c4a417fdf2 chirp/drivers/mursv1.py --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/chirp/drivers/mursv1.py Thu Feb 08 21:17:37 2018 -0500 @@ -0,0 +1,871 @@ +# Copyright 2018: +# * Jim Unroe KC9HI, <rock.unroe(a)gmail.com> +# +# This program is free software: you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation, either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program. If not, see <http://www.gnu.org/licenses/>. + +import time +import struct +import logging +import re + +LOG = logging.getLogger(__name__) + +from chirp.drivers import baofeng_common +from chirp import chirp_common, directory, memmap +from chirp import bitwise, errors, util +from chirp.settings import RadioSettingGroup, RadioSetting, \ + RadioSettingValueBoolean, RadioSettingValueList, \ + RadioSettingValueString, RadioSettingValueInteger, \ + RadioSettingValueFloat, RadioSettings, \ + InvalidValueError +from textwrap import dedent + +##### MAGICS ######################################################### + +# BTECH MURS-V1 magic string +MSTRING_MURSV1 = "\x50\x5F\x20\x15\x12\x15\x4D" + +##### ID strings ##################################################### + +# BTECH MURS-V1 +MURSV1_fp1 = "USM2402" + +DTMF_CHARS = "0123456789 *#ABCD" + +LIST_AB = ["A", "B"] +LIST_ALMOD = ["Off", "Site", "Tone", "Code"] +LIST_BANDWIDTH = ["Wide", "Narrow"] +LIST_COLOR = ["Off", "Blue", "Orange", "Purple"] +LIST_DTMFSPEED = ["%s ms" % x for x in range(50, 2010, 10)] +LIST_DTMFST = ["Off", "DT-ST", "ANI-ST", "DT+ANI"] +LIST_MODE = ["Channel", "Name", "Frequency"] +LIST_OFF1TO9 = ["Off"] + list("123456789") +LIST_OFF1TO10 = LIST_OFF1TO9 + ["10"] +LIST_OFFAB = ["Off"] + LIST_AB +LIST_RESUME = ["TO", "CO", "SE"] +LIST_PONMSG = ["Full", "Message"] +LIST_PTTID = ["Off", "BOT", "EOT", "Both"] +LIST_SCODE = ["%s" % x for x in range(1, 16)] +LIST_RPSTE = ["Off"] + ["%s" % x for x in range(1, 11)] +LIST_RTONE = ["1000 Hz", "1450 Hz", "1750 Hz", "2100 Hz"] +LIST_SAVE = ["Off", "1:1", "1:2", "1:3", "1:4"] +LIST_SHIFTD = ["Off", "+", "-"] +LIST_STEDELAY = ["Off"] + ["%s ms" % x for x in range(100, 1100, 100)] +LIST_TIMEOUT = ["%s sec" % x for x in range(15, 615, 15)] +LIST_TXPOWER = ["High", "Low"] +LIST_VOICE = ["Off", "English", "Chinese"] +LIST_WORKMODE = ["Frequency", "Channel"] + +MURS_FREQS = [151.820, 151.880, 151.940, 154.570, 154.600] * 3 +FM_MODE = [3, 4, 8, 9, 13, 14] + +def model_match(cls, data): + """Match the opened/downloaded image to the correct version""" + rid = data[0x1EF0:0x1EF7] + + if rid in cls._fileid: + return True + + return False + + +(a)directory.register +class MURSV1(baofeng_common.BaofengCommonHT): + """BTech MURS-V1""" + VENDOR = "BTECH" + MODEL = "MURS-V1" + + _fileid = [MURSV1_fp1, ] + + _magic = [MSTRING_MURSV1, ] + _magic_response_length = 8 + _fw_ver_start = 0x1EF0 + _recv_block_size = 0x40 + _mem_size = 0x2000 + _ack_block = True + + _ranges = [(0x0000, 0x0DF0), + (0x0E00, 0x1800), + (0x1EE0, 0x1EF0), + (0x1F60, 0x1F70), + (0x1F80, 0x1F90), + (0x1FC0, 0x1FD0)] + _send_block_size = 0x10 + + MODES = ["NFM", "FM"] + VALID_CHARS = chirp_common.CHARSET_ALPHANUMERIC + \ + "!@#$%^&*()+-=[]:\";'<>?,./" + LENGTH_NAME = 7 + SKIP_VALUES = ["", "S"] + DTCS_CODES = sorted(chirp_common.DTCS_CODES + [645]) + POWER_LEVELS = [chirp_common.PowerLevel("High", watts=2.00), + chirp_common.PowerLevel("Low", watts=.50)] + VALID_BANDS = [(151820000, 154600250)] + PTTID_LIST = LIST_PTTID + SCODE_LIST = LIST_SCODE + + def get_features(self): + rf = chirp_common.RadioFeatures() + rf.has_settings = True + rf.has_bank = False + rf.has_tuning_step = False + rf.can_odd_split = False + rf.has_name = True + rf.has_offset = False + rf.has_mode = True + rf.has_dtcs = True + rf.has_rx_dtcs = True + rf.has_dtcs_polarity = True + rf.has_ctone = True + rf.has_cross = True + rf.valid_modes = self.MODES + rf.valid_characters = self.VALID_CHARS + rf.valid_name_length = self.LENGTH_NAME + rf.valid_duplexes = [] + rf.valid_tmodes = ['', 'Tone', 'TSQL', 'DTCS', 'Cross'] + rf.valid_cross_modes = [ + "Tone->Tone", + "DTCS->", + "->DTCS", + "Tone->DTCS", + "DTCS->Tone", + "->Tone", + "DTCS->DTCS"] + rf.valid_skips = self.SKIP_VALUES + rf.valid_dtcs_codes = self.DTCS_CODES + rf.memory_bounds = (1, 15) + rf.valid_power_levels = self.POWER_LEVELS + rf.valid_bands = self.VALID_BANDS + + return rf + + + MEM_FORMAT = """ + #seekto 0x0010; + struct { + lbcd rxfreq[4]; + lbcd txfreq[4]; + ul16 rxtone; + ul16 txtone; + u8 unknown0:4, + scode:4; + u8 unknown1; + u8 unknown2:7, + lowpower:1; + u8 unknown3:1, + wide:1, + unknown4:2, + bcl:1, + scan:1, + pttid:2; + } memory[15]; + + #seekto 0x0B00; + struct { + u8 code[5]; + u8 unused[11]; + } pttid[15]; + + #seekto 0x0CAA; + struct { + u8 code[5]; + u8 unused1:6, + aniid:2; + u8 unknown[2]; + u8 dtmfon; + u8 dtmfoff; + } ani; + + #seekto 0x0E20; + struct { + u8 unused01:4, + squelch:4; + u8 unused02; + u8 unused03; + u8 unused04:5, + save:3; + u8 unused05:4, + vox:4; + u8 unused06; + u8 unused07:4, + abr:4; + u8 unused08:7, + tdr:1; + u8 unused09:7, + beep:1; + u8 unused10:2, + timeout:6; + u8 unused11[4]; + u8 unused12:6, + voice:2; + u8 unused13; + u8 unused14:6, + dtmfst:2; + u8 unused15; + u8 unused16:6, + screv:2; + u8 unused17:6, + pttid:2; + u8 unused18:2, + pttlt:6; + u8 unused19:6, + mdfa:2; + u8 unused20:6, + mdfb:2; + u8 unused21; + u8 unused22:7, + sync:1; + u8 unused23[4]; + u8 unused24:6, + wtled:2; + u8 unused25:6, + rxled:2; + u8 unused26:6, + txled:2; + u8 unused27:6, + almod:2; + u8 unused28:7, + dbptt:1; + u8 unused29:6, + tdrab:2; + u8 unused30:7, + ste:1; + u8 unused31:4, + rpste:4; + u8 unused32:4, + rptrl:4; + u8 unused33:7, + ponmsg:1; + u8 unused34:7, + roger:1; + u8 unused35:6, + rtone:2; + u8 unused36; + u8 unused37:6, + rogerrx:2; + u8 unused38; + u8 displayab:1, + unknown1:2, + fmradio:1, + alarm:1, + unknown2:1, + reset:1, + menu:1; + u8 unused39; + u8 workmode; + u8 keylock; + u8 cht; + } settings; + + #seekto 0x0E76; + struct { + u8 unused1:1, + mrcha:7; + u8 unused2:1, + mrchb:7; + } wmchannel; + + #seekto 0x0F4E; + u16 fm_presets; + + #seekto 0x1010; + struct { + char name[7]; + u8 unknown1[9]; + } names[15]; + + #seekto 0x1ED0; + struct { + char line1[7]; + char line2[7]; + } sixpoweron_msg; + + #seekto 0x1EE0; + struct { + char line1[7]; + char line2[7]; + } poweron_msg; + + #seekto 0x1EF0; + struct { + char line1[7]; + char line2[7]; + } firmware_msg; + + struct squelch { + u8 sql0; + u8 sql1; + u8 sql2; + u8 sql3; + u8 sql4; + u8 sql5; + u8 sql6; + u8 sql7; + u8 sql8; + u8 sql9; + }; + + #seekto 0x1F60; + struct { + struct squelch vhf; + } squelch; + + """ + + @classmethod + def get_prompts(cls): + rp = chirp_common.RadioPrompts() + rp.experimental = \ + ('The BTech MURS-V1 driver is a beta version.\n' + '\n' + 'Please save an unedited copy of your first successful\n' + 'download to a CHIRP Radio Images(*.img) file.' + ) + rp.pre_download = _(dedent("""\ + Follow these instructions to download your info: + + 1 - Turn off your radio + 2 - Connect your interface cable + 3 - Turn on your radio + 4 - Do the download of your radio data + """)) + rp.pre_upload = _(dedent("""\ + Follow this instructions to upload your info: + + 1 - Turn off your radio + 2 - Connect your interface cable + 3 - Turn on your radio + 4 - Do the upload of your radio data + """)) + return rp + + def process_mmap(self): + """Process the mem map into the mem object""" + self._memobj = bitwise.parse(self.MEM_FORMAT, self._mmap) + + def _get_mem(self, number): + return self._memobj.memory[number - 1] + + def _get_nam(self, number): + return self._memobj.names[number - 1] + + def get_memory(self, number): + _mem = self._get_mem(number) + _nam = self._get_nam(number) + + mem = chirp_common.Memory() + mem.number = number + + mem.freq = int(_mem.rxfreq) * 10 + + for char in _nam.name: + if str(char) == "\xFF": + char = " " # The OEM software may have 0xFF mid-name + mem.name += str(char) + mem.name = mem.name.rstrip() + + dtcs_pol = ["N", "N"] + + if _mem.txtone in [0, 0xFFFF]: + txmode = "" + elif _mem.txtone >= 0x0258: + txmode = "Tone" + mem.rtone = int(_mem.txtone) / 10.0 + elif _mem.txtone <= 0x0258: + txmode = "DTCS" + if _mem.txtone > 0x69: + index = _mem.txtone - 0x6A + dtcs_pol[0] = "R" + else: + index = _mem.txtone - 1 + mem.dtcs = self.DTCS_CODES[index] + else: + LOG.warn("Bug: txtone is %04x" % _mem.txtone) + + if _mem.rxtone in [0, 0xFFFF]: + rxmode = "" + elif _mem.rxtone >= 0x0258: + rxmode = "Tone" + mem.ctone = int(_mem.rxtone) / 10.0 + elif _mem.rxtone <= 0x0258: + rxmode = "DTCS" + if _mem.rxtone >= 0x6A: + index = _mem.rxtone - 0x6A + dtcs_pol[1] = "R" + else: + index = _mem.rxtone - 1 + mem.rx_dtcs = self.DTCS_CODES[index] + else: + LOG.warn("Bug: rxtone is %04x" % _mem.rxtone) + + if txmode == "Tone" and not rxmode: + mem.tmode = "Tone" + elif txmode == rxmode and txmode == "Tone" and mem.rtone == mem.ctone: + mem.tmode = "TSQL" + elif txmode == rxmode and txmode == "DTCS" and mem.dtcs == mem.rx_dtcs: + mem.tmode = "DTCS" + elif rxmode or txmode: + mem.tmode = "Cross" + mem.cross_mode = "%s->%s" % (txmode, rxmode) + + mem.dtcs_polarity = "".join(dtcs_pol) + + if not _mem.scan: + mem.skip = "S" + + levels = self.POWER_LEVELS + try: + mem.power = levels[_mem.lowpower] + except IndexError: + LOG.error("Radio reported invalid power level %s (in %s)" % + (_mem.power, levels)) + mem.power = levels[0] + + mem.mode = _mem.wide and "FM" or "NFM" + + mem.extra = RadioSettingGroup("Extra", "extra") + + rs = RadioSetting("bcl", "BCL", + RadioSettingValueBoolean(_mem.bcl)) + mem.extra.append(rs) + + rs = RadioSetting("pttid", "PTT ID", + RadioSettingValueList(self.PTTID_LIST, + self.PTTID_LIST[_mem.pttid])) + mem.extra.append(rs) + + rs = RadioSetting("scode", "S-CODE", + RadioSettingValueList(self.SCODE_LIST, + self.SCODE_LIST[_mem.scode])) + mem.extra.append(rs) + + return mem + + def _set_mem(self, number): + return self._memobj.memory[number - 1] + + def _set_nam(self, number): + return self._memobj.names[number - 1] + + def set_memory(self, mem): + _mem = self._set_mem(mem.number) + _nam = self._set_nam(mem.number) + + if mem.freq != int(MURS_FREQS[mem.number - 1] * 1000000): + msg = 'Memory location cannot change frequency' + raise errors.InvalidDataError(msg) + return MURSV1.set_memory(self, mem) + + if mem.mode == "FM" and (mem.number - 1) not in FM_MODE: + msg = 'Memory location only supports NFM' + raise errors.InvalidDataError(msg) + return + + _namelength = self.get_features().valid_name_length + for i in range(_namelength): + try: + _nam.name[i] = mem.name[i] + except IndexError: + _nam.name[i] = "\xFF" + + rxmode = txmode = "" + if mem.tmode == "Tone": + _mem.txtone = int(mem.rtone * 10) + _mem.rxtone = 0 + elif mem.tmode == "TSQL": + _mem.txtone = int(mem.ctone * 10) + _mem.rxtone = int(mem.ctone * 10) + elif mem.tmode == "DTCS": + rxmode = txmode = "DTCS" + _mem.txtone = self.DTCS_CODES.index(mem.dtcs) + 1 + _mem.rxtone = self.DTCS_CODES.index(mem.dtcs) + 1 + elif mem.tmode == "Cross": + txmode, rxmode = mem.cross_mode.split("->", 1) + if txmode == "Tone": + _mem.txtone = int(mem.rtone * 10) + elif txmode == "DTCS": + _mem.txtone = self.DTCS_CODES.index(mem.dtcs) + 1 + else: + _mem.txtone = 0 + if rxmode == "Tone": + _mem.rxtone = int(mem.ctone * 10) + elif rxmode == "DTCS": + _mem.rxtone = self.DTCS_CODES.index(mem.rx_dtcs) + 1 + else: + _mem.rxtone = 0 + else: + _mem.rxtone = 0 + _mem.txtone = 0 + + if txmode == "DTCS" and mem.dtcs_polarity[0] == "R": + _mem.txtone += 0x69 + if rxmode == "DTCS" and mem.dtcs_polarity[1] == "R": + _mem.rxtone += 0x69 + + _mem.scan = mem.skip != "S" + _mem.wide = mem.mode == "FM" + + if mem.power: + _mem.lowpower = self.POWER_LEVELS.index(mem.power) + else: + _mem.lowpower = 0 + + # extra settings + if len(mem.extra) > 0: + # there are setting, parse + for setting in mem.extra: + setattr(_mem, setting.get_name(), setting.value) + else: + # there are no extra settings, load defaults + _mem.bcl = 0 + _mem.pttid = 0 + _mem.scode = 0 + + def get_settings(self): + """Translate the bit in the mem_struct into settings in the UI""" + _mem = self._memobj + basic = RadioSettingGroup("basic", "Basic Settings") + advanced = RadioSettingGroup("advanced", "Advanced Settings") + other = RadioSettingGroup("other", "Other Settings") + work = RadioSettingGroup("work", "Work Mode Settings") + fm_preset = RadioSettingGroup("fm_preset", "FM Preset") + dtmfe = RadioSettingGroup("dtmfe", "DTMF Encode Settings") + service = RadioSettingGroup("service", "Service Settings") + top = RadioSettings(basic, advanced, other, work, fm_preset, dtmfe, + service) + + # Basic settings + if _mem.settings.squelch > 0x09: + val = 0x00 + else: + val = _mem.settings.squelch + rs = RadioSetting("settings.squelch", "Squelch", + RadioSettingValueList( + LIST_OFF1TO9, LIST_OFF1TO9[val])) + basic.append(rs) + + if _mem.settings.save > 0x04: + val = 0x00 + else: + val = _mem.settings.save + rs = RadioSetting("settings.save", "Battery Saver", + RadioSettingValueList( + LIST_SAVE, LIST_SAVE[val])) + basic.append(rs) + + if _mem.settings.vox > 0x0A: + val = 0x00 + else: + val = _mem.settings.vox + rs = RadioSetting("settings.vox", "Vox", + RadioSettingValueList( + LIST_OFF1TO10, LIST_OFF1TO10[val])) + basic.append(rs) + + if _mem.settings.abr > 0x0A: + val = 0x00 + else: + val = _mem.settings.abr + rs = RadioSetting("settings.abr", "Backlight Timeout", + RadioSettingValueList( + LIST_OFF1TO10, LIST_OFF1TO10[val])) + basic.append(rs) + + rs = RadioSetting("settings.tdr", "Dual Watch", + RadioSettingValueBoolean(_mem.settings.tdr)) + basic.append(rs) + + rs = RadioSetting("settings.beep", "Beep", + RadioSettingValueBoolean(_mem.settings.beep)) + basic.append(rs) + + if _mem.settings.timeout > 0x27: + val = 0x03 + else: + val = _mem.settings.timeout + rs = RadioSetting("settings.timeout", "Timeout Timer", + RadioSettingValueList( + LIST_TIMEOUT, LIST_TIMEOUT[val])) + basic.append(rs) + + if _mem.settings.voice > 0x02: + val = 0x01 + else: + val = _mem.settings.voice + rs = RadioSetting("settings.voice", "Voice Prompt", + RadioSettingValueList( + LIST_VOICE, LIST_VOICE[val])) + basic.append(rs) + + rs = RadioSetting("settings.dtmfst", "DTMF Sidetone", + RadioSettingValueList(LIST_DTMFST, LIST_DTMFST[ + _mem.settings.dtmfst])) + basic.append(rs) + + if _mem.settings.screv > 0x02: + val = 0x01 + else: + val = _mem.settings.screv + rs = RadioSetting("settings.screv", "Scan Resume", + RadioSettingValueList( + LIST_RESUME, LIST_RESUME[val])) + basic.append(rs) + + rs = RadioSetting("settings.pttid", "When to send PTT ID", + RadioSettingValueList(LIST_PTTID, LIST_PTTID[ + _mem.settings.pttid])) + basic.append(rs) + + if _mem.settings.pttlt > 0x1E: + val = 0x05 + else: + val = _mem.settings.pttlt + rs = RadioSetting("pttlt", "PTT ID Delay", + RadioSettingValueInteger(0, 50, val)) + basic.append(rs) + + rs = RadioSetting("settings.mdfa", "Display Mode (A)", + RadioSettingValueList(LIST_MODE, LIST_MODE[ + _mem.settings.mdfa])) + basic.append(rs) + + rs = RadioSetting("settings.mdfb", "Display Mode (B)", + RadioSettingValueList(LIST_MODE, LIST_MODE[ + _mem.settings.mdfb])) + basic.append(rs) + + rs = RadioSetting("settings.sync", "Sync A & B", + RadioSettingValueBoolean(_mem.settings.sync)) + basic.append(rs) + + rs = RadioSetting("settings.wtled", "Standby LED Color", + RadioSettingValueList( + LIST_COLOR, LIST_COLOR[_mem.settings.wtled])) + basic.append(rs) + + rs = RadioSetting("settings.rxled", "RX LED Color", + RadioSettingValueList( + LIST_COLOR, LIST_COLOR[_mem.settings.rxled])) + basic.append(rs) + + rs = RadioSetting("settings.txled", "TX LED Color", + RadioSettingValueList( + LIST_COLOR, LIST_COLOR[_mem.settings.txled])) + basic.append(rs) + + val = _mem.settings.almod + rs = RadioSetting("settings.almod", "Alarm Mode", + RadioSettingValueList( + LIST_ALMOD, LIST_ALMOD[val])) + basic.append(rs) + + rs = RadioSetting("settings.dbptt", "Double PTT", + RadioSettingValueBoolean(_mem.settings.dbptt)) + basic.append(rs) + + rs = RadioSetting("settings.ste", "Squelch Tail Eliminate (HT to HT)", + RadioSettingValueBoolean(_mem.settings.ste)) + basic.append(rs) + + rs = RadioSetting("settings.ponmsg", "Power-On Message", + RadioSettingValueList(LIST_PONMSG, LIST_PONMSG[ + _mem.settings.ponmsg])) + basic.append(rs) + + rs = RadioSetting("settings.roger", "Roger Beep", + RadioSettingValueBoolean(_mem.settings.roger)) + basic.append(rs) + + rs = RadioSetting("settings.rtone", "Tone Burst Frequency", + RadioSettingValueList(LIST_RTONE, LIST_RTONE[ + _mem.settings.rtone])) + basic.append(rs) + + rs = RadioSetting("settings.rogerrx", "Roger Beep (RX)", + RadioSettingValueList( + LIST_OFFAB, LIST_OFFAB[ + _mem.settings.rogerrx])) + basic.append(rs) + + # Advanced settings + rs = RadioSetting("settings.reset", "RESET Menu", + RadioSettingValueBoolean(_mem.settings.reset)) + advanced.append(rs) + + rs = RadioSetting("settings.menu", "All Menus", + RadioSettingValueBoolean(_mem.settings.menu)) + advanced.append(rs) + + rs = RadioSetting("settings.fmradio", "Broadcast FM Radio", + RadioSettingValueBoolean(_mem.settings.fmradio)) + advanced.append(rs) + + rs = RadioSetting("settings.alarm", "Alarm Sound", + RadioSettingValueBoolean(_mem.settings.alarm)) + advanced.append(rs) + + # Other settings + def _filter(name): + filtered = "" + for char in str(name): + if char in chirp_common.CHARSET_ASCII: + filtered += char + else: + filtered += " " + return filtered + + _msg = _mem.firmware_msg + val = RadioSettingValueString(0, 7, _filter(_msg.line1)) + val.set_mutable(False) + rs = RadioSetting("firmware_msg.line1", "Firmware Message 1", val) + other.append(rs) + + val = RadioSettingValueString(0, 7, _filter(_msg.line2)) + val.set_mutable(False) + rs = RadioSetting("firmware_msg.line2", "Firmware Message 2", val) + other.append(rs) + + _msg = _mem.sixpoweron_msg + val = RadioSettingValueString(0, 7, _filter(_msg.line1)) + val.set_mutable(False) + rs = RadioSetting("sixpoweron_msg.line1", "6+Power-On Message 1", val) + other.append(rs) + val = RadioSettingValueString(0, 7, _filter(_msg.line2)) + val.set_mutable(False) + rs = RadioSetting("sixpoweron_msg.line2", "6+Power-On Message 2", val) + other.append(rs) + + _msg = _mem.poweron_msg + rs = RadioSetting("poweron_msg.line1", "Power-On Message 1", + RadioSettingValueString( + 0, 7, _filter(_msg.line1))) + other.append(rs) + rs = RadioSetting("poweron_msg.line2", "Power-On Message 2", + RadioSettingValueString( + 0, 7, _filter(_msg.line2))) + other.append(rs) + + # Work mode settings + rs = RadioSetting("settings.displayab", "Display", + RadioSettingValueList( + LIST_AB, LIST_AB[_mem.settings.displayab])) + work.append(rs) + + rs = RadioSetting("settings.keylock", "Keypad Lock", + RadioSettingValueBoolean(_mem.settings.keylock)) + work.append(rs) + + rs = RadioSetting("wmchannel.mrcha", "MR A Channel", + RadioSettingValueInteger(1, 15, + _mem.wmchannel.mrcha)) + work.append(rs) + + rs = RadioSetting("wmchannel.mrchb", "MR B Channel", + RadioSettingValueInteger(1, 15, + _mem.wmchannel.mrchb)) + work.append(rs) + + # broadcast FM settings + _fm_presets = self._memobj.fm_presets + if _fm_presets <= 108.0 * 10 - 650: + preset = _fm_presets / 10.0 + 65 + elif _fm_presets >= 65.0 * 10 and _fm_presets <= 108.0 * 10: + preset = _fm_presets / 10.0 + else: + preset = 76.0 + rs = RadioSetting("fm_presets", "FM Preset(MHz)", + RadioSettingValueFloat(65, 108.0, preset, 0.1, 1)) + fm_preset.append(rs) + + # DTMF settings + def apply_code(setting, obj, length): + code = [] + for j in range(0, length): + try: + code.append(DTMF_CHARS.index(str(setting.value)[j])) + except IndexError: + code.append(0xFF) + obj.code = code + + for i in range(0, 15): + _codeobj = self._memobj.pttid[i].code + _code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F]) + val = RadioSettingValueString(0, 5, _code, False) + val.set_charset(DTMF_CHARS) + pttid = RadioSetting("pttid/%i.code" % i, + "Signal Code %i" % (i + 1), val) + pttid.set_apply_callback(apply_code, self._memobj.pttid[i], 5) + dtmfe.append(pttid) + + if _mem.ani.dtmfon > 0xC3: + val = 0x03 + else: + val = _mem.ani.dtmfon + rs = RadioSetting("ani.dtmfon", "DTMF Speed (on)", + RadioSettingValueList(LIST_DTMFSPEED, + LIST_DTMFSPEED[val])) + dtmfe.append(rs) + + if _mem.ani.dtmfoff > 0xC3: + val = 0x03 + else: + val = _mem.ani.dtmfoff + rs = RadioSetting("ani.dtmfoff", "DTMF Speed (off)", + RadioSettingValueList(LIST_DTMFSPEED, + LIST_DTMFSPEED[val])) + dtmfe.append(rs) + + _codeobj = self._memobj.ani.code + _code = "".join([DTMF_CHARS[x] for x in _codeobj if int(x) < 0x1F]) + val = RadioSettingValueString(0, 5, _code, False) + val.set_charset(DTMF_CHARS) + rs = RadioSetting("ani.code", "ANI Code", val) + rs.set_apply_callback(apply_code, self._memobj.ani, 5) + dtmfe.append(rs) + + rs = RadioSetting("ani.aniid", "When to send ANI ID", + RadioSettingValueList(LIST_PTTID, + LIST_PTTID[_mem.ani.aniid])) + dtmfe.append(rs) + + # Service settings + for index in range(0, 10): + key = "squelch.vhf.sql%i" % (index) + _obj = self._memobj.squelch.vhf + val = RadioSettingValueInteger(0, 123, + getattr(_obj, "sql%i" % (index))) + if index == 0: + val.set_mutable(False) + name = "Squelch %i" % (index) + rs = RadioSetting(key, name, val) + service.append(rs) + + return top + + @classmethod + def match_model(cls, filedata, filename): + match_size = False + match_model = False + + # testing the file data size + if len(filedata) == 0x2008: + match_size = True + + # testing the firmware model fingerprint + match_model = model_match(cls, filedata) + + if match_size and match_model: + return True + else: + return False

2 4

[chirp_devel] Build test results: Successful
by Build System 10 Feb '18

10 Feb '18

Tested changes: Changes for Build #722 [Dan Smith <dsmith(a)danplanet.com>] Fix MURS1 radio to use validate_memory() and make edges test case tolerant This fixes one test case that should ignore memories that don't validate from the radio, and makes the MURS1 radio support said validation. This is related to #5255 [Jim Unroe <rock.unroe(a)gmail.com>] [MURS-V1] Add Support for BTech MURS-V1 This patch adds support for the BTech MURS-V1 handheld radio. #5255 [Jim Unroe <rock.unroe(a)gmail.com>] [MURS-V1] Prepare CHIRP for BTech MURS-V1 (update baofeng_common.py) The BTech GMRS-V1 and BTech MURS-V1 are very different radios but both respond to the same "magic". This patch provides checks to make sure... 1. the model selected by the user matches the physical radio model. 2. the image being uploaded matches the physical radio model. related to #5255 [Tom Hayward <tom(a)tomh.us>] [id880] Fix typo in charset definition. #281 [Tom Hayward <tom(a)tomh.us>] [thf6a] Support full charset (ASCII). Fixes #141 [Tom Hayward <tom(a)tomh.us>] [id880] Support full charset. Fixes #281 [Tom Hayward <tom(a)tomh.us>] [vx5] Support full charset (ASCII). Fixes #292 [Tom Hayward <tom(a)tomh.us>] [id31a] set used bit when creating new memory, clear when deleting. Fixes #269 [Tom Hayward <tom(a)tomh.us>] Support PyGTK < 2.22 in bank edit. Fixes #231 [Tom Hayward <tom(a)tomh.us>] [d710] [v71] [d72] Fix tone list (not all tones are supported). Fixes #212 [Dan Smith <dsmith(a)danplanet.com>] [vx7] Fix setting memory power levels on 220MHz band Fixes #214 [Dan Smith <dsmith(a)danplanet.com>] fips: Pennsylvania FIPS code was wrong. #117 [Marco Filippi <iz3gme.marco(a)gmail.com>] Consider lower bound frequency of each valid_band as valid Fix bug #181 [Tom Hayward <tom(a)tomh.us>] tmd700: allow 8-char names. Fixes #176 [Dan Smith <dsmith(a)danplanet.com>] Fix the "blind deletion" problem, as well as properly direct copy/paste Fixes #172 [David Griffith <dave(a)661.org>] Bug #155 fix: VX-7 1.25m power levels [David Griffith <dave(a)661.org>] New INSTALL and README files Fixes #122 [Tom Hayward <tom(a)tomh.us>] thd72: only use hardware flow on OS X. Fixes #166 [Marco Filippi <iz3gme.marco(a)gmail.com>] [FT817] Tone freq not set correctly Same as #88 for FT857, to avoid code duplication fix code have been moved from ft857 to its ancestor class Fix bug #163 [Tom Hayward <tom(a)tomh.us>] Fix Mac .app so paths with spaces work. Fixes Bug #145 Full log: [...truncated 124 lines...] test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_icom_bank (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_index_bounds (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_next_mapping_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_auto_tone_mode_cross (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_pol (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_rx (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tone (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tsql (tests.unit.test_memedit_edits.TestEdits) ... ok test_init (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_bad_portnames (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_sorted (tests.unit.test_platform.Win32PlatformTest) ... ok test_apply_callback (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_group (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_multi (tests.unit.test_settings.TestSettingContainers) ... ok test_changed (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_boolean (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_float (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_integer (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_list (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_string (tests.unit.test_settings.TestSettingValues) ... ok test_validate_callback (tests.unit.test_settings.TestSettingValues) ... ok test_delete_hole_with_all (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_all_full (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_without_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_with_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_without_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok ---------------------------------------------------------------------- Ran 151 tests in 0.060s OK unit runtests: commands[1] | python ./share/make_supported.py /dev/null driver inst-nodeps: /var/lib/jenkins/jobs/chirp-test/workspace/.tox/dist/chirp-0.3.0dev.zip driver installed: ----------------------------------------,Error when trying to get requirement for VCS system Command "git config --get-regexp remote\..*\.url" failed with error code 1 in /danplanet/users/dan/automation/donatello_events, falling back to uneditable format,Could not determine repository location of /danplanet/users/dan/automation/donatello_events,Warning: cannot find svn location for soaplib===0.8.1dev-r0,aiohttp==0.15.2,alabaster==0.7.7,aniso8601==0.92,ansible==2.2.1.0,appdirs==1.4.0,astral==1.2,astroid==1.3.4,asyncio==3.4.1,attrs==15.2.0,Babel==1.3,backports.ssl-match-hostname==3.5.0.1,beautifulsoup4==4.4.1,carbon==0.9.15,CDDB==1.4,cffi==1.9.1,chardet==2.3.0,chirp==0.3.0.dev0,colorama==0.2.7,cryptography==1.7.2,Django==1.8.7,django-tagging==0.4,dnspython==1.12.0,docutils==0.12,## !! Could not determine repository location,Donatello==1.0,## !! Could not determine repository location,donatello-events==1.0,ecdsa==0.13,enum34==1.1.6,extras==0.0.3,eyeD3==0.7.4,fixtures==1.3.1,Flask==0.10.1,Flask-RESTful==0.3.1,gear==0.5.8,gearman==2.0.2,gevent==1.0.1,gevent-socketio==0.3.6,gevent-websocket==0.9.3,git-review==1.24,graphite-web==0.9.15,greenlet==0.4.5,gyp==0.1,hachoir-core==1.3.3,hachoir-metadata==1.3.3,hachoir-parser==1.3.4,html5lib==0.999,httplib2==0.9.1,idna==2.2,iniparse==0.4,iotop==0.6,ipaddr==2.1.11,ipaddress==1.0.18,iso8601==0.1.11,itsdangerous==0.24,Jinja2==2.8.1,junitxml==0.6,keyring==7.3,launchpadlib==1.10.3,lazr.restfulclient==0.13.4,lazr.uri==1.0.3,libvirt-python==1.3.1,linecache2==1.0.0,lockfile==0.9.1,logilab-common==0.63.2,lxml==3.5.0,M2Crypto==0.22.6rc4,MarkupSafe==0.23,mechanize==0.2.5,meld==3.14.2,mercurial==3.7.3,mock==1.0.1,mox==0.5.3,musicbrainzngs==0.5,mutagen==1.31,mysqlclient==1.3.7,ndg-httpsclient==0.4.0,netaddr==0.7.18,oauth==1.0.1,packaging==16.8,paho-mqtt==1.1,PAM==0.4.2,paramiko==2.1.1,pbr==1.8.1,pep8==1.6.2,phue==0.8,Pillow==3.1.2,pluggy==0.5.2,ply==3.10,prettytable==0.7.2,psutil==3.4.2,puredaemon==0.1.0,pushbullet.py==0.11.0,py==1.4.34,pyasn1==0.2.3,pyasn1-modules==0.0.7,pycparser==2.17,pycrypto==2.6.1,pycryptodome==3.4.5,pycurl==7.43.0,Pygments==2.1,pygobject==3.20.0,pylast==1.0.0,pyliblzma==0.5.3,pylint==1.4.1,pynoc==1.4.2,-e git+https://kk7ds:sQnEgbmw16Ox@github.com/kk7ds/pynx584.git@cad0f8a701d220876f9872fd36aa73671ccd4c0a#egg=pynx584,pyOpenSSL==0.15.1,pyparsing==2.1.10,pyrit==0.4.0,pyserial==3.0.1,pysignals==0.1.2,pysmi==0.0.7,pysnmp==4.3.4,pysqlite==2.7.0,python-apt==1.1.0b1,python-daemon==1.6,python-debian==0.1.27,python-keyczar==0.715,python-magic==0.4.6,python-mimeparse==0.1.4,python-mpd==0.3.0,python-subunit==1.1.0,pytz==2014.10,pyvera==1.0,pywemo==0.4.0,pywws==17.11.0,pyxdg==0.25,pyxmpp==1.1.2,PyYAML==3.12,requests==2.9.1,retrying==1.3.3,roman==2.0.0,rpm-python==4.12.0.1,scapy==2.3.1,SecretStorage==2.1.3,service-identity==16.0.0,setproctitle==1.1.8,simplejson==3.8.1,six==1.10.0,snmpy==1.0.0,## FIXME: could not find svn URL in dependency_links for this package:,soaplib===0.8.1dev-r0,Sphinx==1.3.6,sphinx-rtd-theme==0.1.9,SQLAlchemy==1.0.11,sqlparse==0.1.18,stevedore==1.10.0,termcolor==1.1.0,testrepository==0.0.20,testtools==1.8.1,tmdb3==0.7.2,tox==2.8.2,traceback2==1.4.0,tvdb-api==1.10,Twisted==12.0.0,twitter==1.16.0,txAMQP==0.6.2,tzlocal==1.5.1,unifi==1.2.5,unittest2==1.1.0,urlgrabber==3.9.1,urllib3==1.13.1,virtualenv==15.1.0,wadllib==1.3.2,websocket-client==0.46.0,Werkzeug==0.9.6,whisper==0.9.12,xmldiff==0.6.10,yum-metadata-parser==1.1.4,zope.interface==4.1.1 driver runtests: PYTHONHASHSEED='1029488192' driver runtests: commands[0] | python -munittest -vb tests test_banks (tests.TestCase_BaofengBFT1) Testing Baofeng BF-T1 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BaofengBFT1) Testing Baofeng BF-T1 brute force ... ok test_clone (tests.TestCase_BaofengBFT1) Testing Baofeng BF-T1 clone ... ok test_copy_all (tests.TestCase_BaofengBFT1) Testing Baofeng BF-T1 copy all ... ok test_detect (tests.TestCase_BaofengBFT1) Testing Baofeng BF-T1 detect ... ok test_edges (tests.TestCase_BaofengBFT1) Testing Baofeng BF-T1 edges ... ok test_settings (tests.TestCase_BaofengBFT1) Testing Baofeng BF-T1 settings ... ok test_banks (tests.TestCase_IcomICT8A) Testing Icom IC-T8A banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_IcomICT8A) Testing Icom IC-T8A brute force ... ok test_clone (tests.TestCase_IcomICT8A) Testing Icom IC-T8A clone ... ok test_copy_all (tests.TestCase_IcomICT8A) Testing Icom IC-T8A copy all ... ok test_detect (tests.TestCase_IcomICT8A) Testing Icom IC-T8A detect ... ok test_edges (tests.TestCase_IcomICT8A) Testing Icom IC-T8A edges ... ok test_settings (tests.TestCase_IcomICT8A) Testing Icom IC-T8A settings ... skipped 'Settings not supported' test_banks (tests.TestCase_TYTTH9800) Testing TYT TH-9800 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TYTTH9800) Testing TYT TH-9800 brute force ... ok test_clone (tests.TestCase_TYTTH9800) Testing TYT TH-9800 clone ... ok test_copy_all (tests.TestCase_TYTTH9800) Testing TYT TH-9800 copy all ... ok test_detect (tests.TestCase_TYTTH9800) Testing TYT TH-9800 detect ... ok test_edges (tests.TestCase_TYTTH9800) Testing TYT TH-9800 edges ... ok test_settings (tests.TestCase_TYTTH9800) Testing TYT TH-9800 settings ... ok test_banks (tests.TestCase_KenwoodTK8102) Testing Kenwood TK-8102 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_KenwoodTK8102) Testing Kenwood TK-8102 brute force ... ok test_clone (tests.TestCase_KenwoodTK8102) Testing Kenwood TK-8102 clone ... ok test_copy_all (tests.TestCase_KenwoodTK8102) Testing Kenwood TK-8102 copy all ... ok test_detect (tests.TestCase_KenwoodTK8102) Testing Kenwood TK-8102 detect ... ok test_edges (tests.TestCase_KenwoodTK8102) Testing Kenwood TK-8102 edges ... ok test_settings (tests.TestCase_KenwoodTK8102) Testing Kenwood TK-8102 settings ... ok test_banks (tests.TestCase_IcomID51Plus) Testing Icom ID-51 Plus banks ... ok test_brute_force (tests.TestCase_IcomID51Plus) Testing Icom ID-51 Plus brute force ... ok test_clone (tests.TestCase_IcomID51Plus) Testing Icom ID-51 Plus clone ... ok test_copy_all (tests.TestCase_IcomID51Plus) Testing Icom ID-51 Plus copy all ... ok test_detect (tests.TestCase_IcomID51Plus) Testing Icom ID-51 Plus detect ... ok test_edges (tests.TestCase_IcomID51Plus) Testing Icom ID-51 Plus edges ... ok test_settings (tests.TestCase_IcomID51Plus) Testing Icom ID-51 Plus settings ... ok test_banks (tests.TestCase_BTECHMURSV1) Testing BTECH MURS-V1 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHMURSV1) Testing BTECH MURS-V1 brute force ... ok test_clone (tests.TestCase_BTECHMURSV1) Testing BTECH MURS-V1 clone ... ok test_copy_all (tests.TestCase_BTECHMURSV1) Testing BTECH MURS-V1 copy all ... ok test_detect (tests.TestCase_BTECHMURSV1) Testing BTECH MURS-V1 detect ... ok test_edges (tests.TestCase_BTECHMURSV1) Testing BTECH MURS-V1 edges ... skipped 'No mutable memory locations found' test_settings (tests.TestCase_BTECHMURSV1) Testing BTECH MURS-V1 settings ... ok test_banks (tests.TestCase_YaesuFT2800M) Testing Yaesu FT-2800M banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT2800M) Testing Yaesu FT-2800M brute force ... ok test_clone (tests.TestCase_YaesuFT2800M) Testing Yaesu FT-2800M clone ... ok test_copy_all (tests.TestCase_YaesuFT2800M) Testing Yaesu FT-2800M copy all ... ok test_detect (tests.TestCase_YaesuFT2800M) Testing Yaesu FT-2800M detect ... ok test_edges (tests.TestCase_YaesuFT2800M) Testing Yaesu FT-2800M edges ... ok test_settings (tests.TestCase_YaesuFT2800M) Testing Yaesu FT-2800M settings ... skipped 'Settings not supported' test_banks (tests.TestCase_BTECHUV5001) Testing BTECH UV-5001 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHUV5001) Testing BTECH UV-5001 brute force ... ok test_clone (tests.TestCase_BTECHUV5001) Testing BTECH UV-5001 clone ... ok test_copy_all (tests.TestCase_BTECHUV5001) Testing BTECH UV-5001 copy all ... ok test_detect (tests.TestCase_BTECHUV5001) Testing BTECH UV-5001 detect ... ok test_edges (tests.TestCase_BTECHUV5001) Testing BTECH UV-5001 edges ... ok test_settings (tests.TestCase_BTECHUV5001) Testing BTECH UV-5001 settings ... ok test_banks (tests.TestCase_BTECHUV25X2) Testing BTECH UV-25X2 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHUV25X2) Testing BTECH UV-25X2 brute force ... ok test_clone (tests.TestCase_BTECHUV25X2) Testing BTECH UV-25X2 clone ... ok test_copy_all (tests.TestCase_BTECHUV25X2) Testing BTECH UV-25X2 copy all ... ok test_detect (tests.TestCase_BTECHUV25X2) Testing BTECH UV-25X2 detect ... ok test_edges (tests.TestCase_BTECHUV25X2) Testing BTECH UV-25X2 edges ... ok test_settings (tests.TestCase_BTECHUV25X2) Testing BTECH UV-25X2 settings ... ok test_banks (tests.TestCase_TYTTHUV3R25) Testing TYT TH-UV3R-25 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TYTTHUV3R25) Testing TYT TH-UV3R-25 brute force ... ok test_clone (tests.TestCase_TYTTHUV3R25) Testing TYT TH-UV3R-25 clone ... ok test_copy_all (tests.TestCase_TYTTHUV3R25) Testing TYT TH-UV3R-25 copy all ... ok test_detect (tests.TestCase_TYTTHUV3R25) Testing TYT TH-UV3R-25 detect ... ok test_edges (tests.TestCase_TYTTHUV3R25) Testing TYT TH-UV3R-25 edges ... ok test_settings (tests.TestCase_TYTTHUV3R25) Testing TYT TH-UV3R-25 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_IcomID880H) Testing Icom ID-880H banks ... ok test_brute_force (tests.TestCase_IcomID880H) Testing Icom ID-880H brute force ... ok test_clone (tests.TestCase_IcomID880H) Testing Icom ID-880H clone ... ok test_copy_all (tests.TestCase_IcomID880H) Testing Icom ID-880H copy all ... ok test_detect (tests.TestCase_IcomID880H) Testing Icom ID-880H detect ... ok test_edges (tests.TestCase_IcomID880H) Testing Icom ID-880H edges ... ok test_settings (tests.TestCase_IcomID880H) Testing Icom ID-880H settings ... ok test_banks (tests.TestCase_RetevisRT26) Testing Retevis RT26 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RetevisRT26) Testing Retevis RT26 brute force ... ok test_clone (tests.TestCase_RetevisRT26) Testing Retevis RT26 clone ... ok test_copy_all (tests.TestCase_RetevisRT26) Testing Retevis RT26 copy all ... ok test_detect (tests.TestCase_RetevisRT26) Testing Retevis RT26 detect ... ok test_edges (tests.TestCase_RetevisRT26) Testing Retevis RT26 edges ... ok test_settings (tests.TestCase_RetevisRT26) Testing Retevis RT26 settings ... ok test_banks (tests.TestCase_BaofengUV6R) Testing Baofeng UV-6R banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BaofengUV6R) Testing Baofeng UV-6R brute force ... ok test_clone (tests.TestCase_BaofengUV6R) Testing Baofeng UV-6R clone ... ok test_copy_all (tests.TestCase_BaofengUV6R) Testing Baofeng UV-6R copy all ... ok test_detect (tests.TestCase_BaofengUV6R) Testing Baofeng UV-6R detect ... ok test_edges (tests.TestCase_BaofengUV6R) Testing Baofeng UV-6R edges ... ok test_settings (tests.TestCase_BaofengUV6R) Testing Baofeng UV-6R settings ... ok test_banks (tests.TestCase_WouxunKGUV6) Testing Wouxun KG-UV6 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_WouxunKGUV6) Testing Wouxun KG-UV6 brute force ... ok test_clone (tests.TestCase_WouxunKGUV6) Testing Wouxun KG-UV6 clone ... ok test_copy_all (tests.TestCase_WouxunKGUV6) Testing Wouxun KG-UV6 copy all ... ok test_detect (tests.TestCase_WouxunKGUV6) Testing Wouxun KG-UV6 detect ... ok test_edges (tests.TestCase_WouxunKGUV6) Testing Wouxun KG-UV6 edges ... ok test_settings (tests.TestCase_WouxunKGUV6) Testing Wouxun KG-UV6 settings ... ok test_banks (tests.TestCase_PuxingPX2R) Testing Puxing PX-2R banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_PuxingPX2R) Testing Puxing PX-2R brute force ... ok test_clone (tests.TestCase_PuxingPX2R) Testing Puxing PX-2R clone ... ok test_copy_all (tests.TestCase_PuxingPX2R) Testing Puxing PX-2R copy all ... ok test_detect (tests.TestCase_PuxingPX2R) Testing Puxing PX-2R detect ... ok test_edges (tests.TestCase_PuxingPX2R) Testing Puxing PX-2R edges ... ok test_settings (tests.TestCase_PuxingPX2R) Testing Puxing PX-2R settings ... skipped 'Settings not supported' test_banks (tests.TestCase_YaesuFT817ND) Testing Yaesu FT-817ND banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT817ND) Testing Yaesu FT-817ND brute force ... ok test_clone (tests.TestCase_YaesuFT817ND) Testing Yaesu FT-817ND clone ... ok test_copy_all (tests.TestCase_YaesuFT817ND) Testing Yaesu FT-817ND copy all ... ok test_detect (tests.TestCase_YaesuFT817ND) Testing Yaesu FT-817ND detect ... ok test_edges (tests.TestCase_YaesuFT817ND) Testing Yaesu FT-817ND edges ... ok test_settings (tests.TestCase_YaesuFT817ND) Testing Yaesu FT-817ND settings ... ok test_banks (tests.TestCase_IcomIC2820H) Testing Icom IC-2820H banks ... ok test_brute_force (tests.TestCase_IcomIC2820H) Testing Icom IC-2820H brute force ... ok test_clone (tests.TestCase_IcomIC2820H) Testing Icom IC-2820H clone ... ok test_copy_all (tests.TestCase_IcomIC2820H) Testing Icom IC-2820H copy all ... ok test_detect (tests.TestCase_IcomIC2820H) Testing Icom IC-2820H detect ... ok test_edges (tests.TestCase_IcomIC2820H) Testing Icom IC-2820H edges ... ok test_settings (tests.TestCase_IcomIC2820H) Testing Icom IC-2820H settings ... ok test_banks (tests.TestCase_JetstreamJT220M) Testing Jetstream JT220M banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_JetstreamJT220M) Testing Jetstream JT220M brute force ... ok test_clone (tests.TestCase_JetstreamJT220M) Testing Jetstream JT220M clone ... ok test_copy_all (tests.TestCase_JetstreamJT220M) Testing Jetstream JT220M copy all ... ok test_detect (tests.TestCase_JetstreamJT220M) Testing Jetstream JT220M detect ... ok test_edges (tests.TestCase_JetstreamJT220M) Testing Jetstream JT220M edges ... ok test_settings (tests.TestCase_JetstreamJT220M) Testing Jetstream JT220M settings ... skipped 'Settings not supported' test_banks (tests.TestCase_AlincoDJ596) Testing Alinco DJ596 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_AlincoDJ596) Testing Alinco DJ596 brute force ... ok test_clone (tests.TestCase_AlincoDJ596) Testing Alinco DJ596 clone ... ok test_copy_all (tests.TestCase_AlincoDJ596) Testing Alinco DJ596 copy all ... ok test_detect (tests.TestCase_AlincoDJ596) Testing Alinco DJ596 detect ... ok test_edges (tests.TestCase_AlincoDJ596) Testing Alinco DJ596 edges ... ok test_settings (tests.TestCase_AlincoDJ596) Testing Alinco DJ596 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_JetstreamJT270MH) Testing Jetstream JT270MH banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_JetstreamJT270MH) Testing Jetstream JT270MH brute force ... ok test_clone (tests.TestCase_JetstreamJT270MH) Testing Jetstream JT270MH clone ... ok test_copy_all (tests.TestCase_JetstreamJT270MH) Testing Jetstream JT270MH copy all ... ok test_detect (tests.TestCase_JetstreamJT270MH) Testing Jetstream JT270MH detect ... ok test_edges (tests.TestCase_JetstreamJT270MH) Testing Jetstream JT270MH edges ... ok test_settings (tests.TestCase_JetstreamJT270MH) Testing Jetstream JT270MH settings ... ok test_banks (tests.TestCase_BTECHUV2501220) Testing BTECH UV-2501+220 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHUV2501220) Testing BTECH UV-2501+220 brute force ... ok test_clone (tests.TestCase_BTECHUV2501220) Testing BTECH UV-2501+220 clone ... ok test_copy_all (tests.TestCase_BTECHUV2501220) Testing BTECH UV-2501+220 copy all ... ok test_detect (tests.TestCase_BTECHUV2501220) Testing BTECH UV-2501+220 detect ... ok test_edges (tests.TestCase_BTECHUV2501220) Testing BTECH UV-2501+220 edges ... ok test_settings (tests.TestCase_BTECHUV2501220) Testing BTECH UV-2501+220 settings ... ok test_banks (tests.TestCase_BTECHUV50X2) Testing BTECH UV-50X2 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHUV50X2) Testing BTECH UV-50X2 brute force ... ok test_clone (tests.TestCase_BTECHUV50X2) Testing BTECH UV-50X2 clone ... ok test_copy_all (tests.TestCase_BTECHUV50X2) Testing BTECH UV-50X2 copy all ... ok test_detect (tests.TestCase_BTECHUV50X2) Testing BTECH UV-50X2 detect ... ok test_edges (tests.TestCase_BTECHUV50X2) Testing BTECH UV-50X2 edges ... ok test_settings (tests.TestCase_BTECHUV50X2) Testing BTECH UV-50X2 settings ... ok test_banks (tests.TestCase_IcomICT7H) Testing Icom IC-T7H banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_IcomICT7H) Testing Icom IC-T7H brute force ... ok test_clone (tests.TestCase_IcomICT7H) Testing Icom IC-T7H clone ... ok test_copy_all (tests.TestCase_IcomICT7H) Testing Icom IC-T7H copy all ... ok test_detect (tests.TestCase_IcomICT7H) Testing Icom IC-T7H detect ... ok test_edges (tests.TestCase_IcomICT7H) Testing Icom IC-T7H edges ... ok test_settings (tests.TestCase_IcomICT7H) Testing Icom IC-T7H settings ... skipped 'Settings not supported' test_banks (tests.TestCase_BaojieBJ9900) Testing Baojie BJ-9900 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BaojieBJ9900) Testing Baojie BJ-9900 brute force ... ok test_clone (tests.TestCase_BaojieBJ9900) Testing Baojie BJ-9900 clone ... ok test_copy_all (tests.TestCase_BaojieBJ9900) Testing Baojie BJ-9900 copy all ... ok test_detect (tests.TestCase_BaojieBJ9900) Testing Baojie BJ-9900 detect ... ok test_edges (tests.TestCase_BaojieBJ9900) Testing Baojie BJ-9900 edges ... ok test_settings (tests.TestCase_BaojieBJ9900) Testing Baojie BJ-9900 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_IcomIC2300H) Testing Icom IC-2300H banks ... ok test_brute_force (tests.TestCase_IcomIC2300H) Testing Icom IC-2300H brute force ... ok test_clone (tests.TestCase_IcomIC2300H) Testing Icom IC-2300H clone ... ok test_copy_all (tests.TestCase_IcomIC2300H) Testing Icom IC-2300H copy all ... ok test_detect (tests.TestCase_IcomIC2300H) Testing Icom IC-2300H detect ... ok test_edges (tests.TestCase_IcomIC2300H) Testing Icom IC-2300H edges ... ok test_settings (tests.TestCase_IcomIC2300H) Testing Icom IC-2300H settings ... ok test_banks (tests.TestCase_YaesuVX7) Testing Yaesu VX-7 banks ... ok test_brute_force (tests.TestCase_YaesuVX7) Testing Yaesu VX-7 brute force ... ok test_clone (tests.TestCase_YaesuVX7) Testing Yaesu VX-7 clone ... ok test_copy_all (tests.TestCase_YaesuVX7) Testing Yaesu VX-7 copy all ... ok test_detect (tests.TestCase_YaesuVX7) Testing Yaesu VX-7 detect ... ok test_edges (tests.TestCase_YaesuVX7) Testing Yaesu VX-7 edges ... ok test_settings (tests.TestCase_YaesuVX7) Testing Yaesu VX-7 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_TDXoneTDQ8A) Testing TDXone TD-Q8A banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TDXoneTDQ8A) Testing TDXone TD-Q8A brute force ... ok test_clone (tests.TestCase_TDXoneTDQ8A) Testing TDXone TD-Q8A clone ... ok test_copy_all (tests.TestCase_TDXoneTDQ8A) Testing TDXone TD-Q8A copy all ... ok test_detect (tests.TestCase_TDXoneTDQ8A) Testing TDXone TD-Q8A detect ... ok test_edges (tests.TestCase_TDXoneTDQ8A) Testing TDXone TD-Q8A edges ... ok test_settings (tests.TestCase_TDXoneTDQ8A) Testing TDXone TD-Q8A settings ... ok test_banks (tests.TestCase_WouxunKG818) Testing Wouxun KG-818 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_WouxunKG818) Testing Wouxun KG-818 brute force ... ok test_clone (tests.TestCase_WouxunKG818) Testing Wouxun KG-818 clone ... ok test_copy_all (tests.TestCase_WouxunKG818) Testing Wouxun KG-818 copy all ... ok test_detect (tests.TestCase_WouxunKG818) Testing Wouxun KG-818 detect ... ok test_edges (tests.TestCase_WouxunKG818) Testing Wouxun KG-818 edges ... ok test_settings (tests.TestCase_WouxunKG818) Testing Wouxun KG-818 settings ... ok test_banks (tests.TestCase_WACCOMMINI8900) Testing WACCOM MINI-8900 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_WACCOMMINI8900) Testing WACCOM MINI-8900 brute force ... ok test_clone (tests.TestCase_WACCOMMINI8900) Testing WACCOM MINI-8900 clone ... ok test_copy_all (tests.TestCase_WACCOMMINI8900) Testing WACCOM MINI-8900 copy all ... ok test_detect (tests.TestCase_WACCOMMINI8900) Testing WACCOM MINI-8900 detect ... ok test_edges (tests.TestCase_WACCOMMINI8900) Testing WACCOM MINI-8900 edges ... ok test_settings (tests.TestCase_WACCOMMINI8900) Testing WACCOM MINI-8900 settings ... ok test_banks (tests.TestCase_BaofengUV3R) Testing Baofeng UV-3R banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BaofengUV3R) Testing Baofeng UV-3R brute force ... ok test_clone (tests.TestCase_BaofengUV3R) Testing Baofeng UV-3R clone ... ok test_copy_all (tests.TestCase_BaofengUV3R) Testing Baofeng UV-3R copy all ... ok test_detect (tests.TestCase_BaofengUV3R) Testing Baofeng UV-3R detect ... ok test_edges (tests.TestCase_BaofengUV3R) Testing Baofeng UV-3R edges ... ok test_settings (tests.TestCase_BaofengUV3R) Testing Baofeng UV-3R settings ... ok test_banks (tests.TestCase_AnyToneTERMN8R) Testing AnyTone TERMN-8R banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_AnyToneTERMN8R) Testing AnyTone TERMN-8R brute force ... ok test_clone (tests.TestCase_AnyToneTERMN8R) Testing AnyTone TERMN-8R clone ... ok test_copy_all (tests.TestCase_AnyToneTERMN8R) Testing AnyTone TERMN-8R copy all ... ok test_detect (tests.TestCase_AnyToneTERMN8R) Testing AnyTone TERMN-8R detect ... ok test_edges (tests.TestCase_AnyToneTERMN8R) Testing AnyTone TERMN-8R edges ... ok test_settings (tests.TestCase_AnyToneTERMN8R) Testing AnyTone TERMN-8R settings ... ok test_banks (tests.TestCase_YaesuFT50) Testing Yaesu FT-50 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT50) Testing Yaesu FT-50 brute force ... ok test_clone (tests.TestCase_YaesuFT50) Testing Yaesu FT-50 clone ... ok test_copy_all (tests.TestCase_YaesuFT50) Testing Yaesu FT-50 copy all ... ok test_detect (tests.TestCase_YaesuFT50) Testing Yaesu FT-50 detect ... ok test_edges (tests.TestCase_YaesuFT50) Testing Yaesu FT-50 edges ... ok test_settings (tests.TestCase_YaesuFT50) Testing Yaesu FT-50 settings ... ok test_banks (tests.TestCase_IcomICP7) Testing Icom IC-P7 banks ... ok test_brute_force (tests.TestCase_IcomICP7) Testing Icom IC-P7 brute force ... ok test_clone (tests.TestCase_IcomICP7) Testing Icom IC-P7 clone ... ok test_copy_all (tests.TestCase_IcomICP7) Testing Icom IC-P7 copy all ... ok test_detect (tests.TestCase_IcomICP7) Testing Icom IC-P7 detect ... ok test_edges (tests.TestCase_IcomICP7) Testing Icom IC-P7 edges ... ok test_settings (tests.TestCase_IcomICP7) Testing Icom IC-P7 settings ... ok test_banks (tests.TestCase_IcomICW32E) Testing Icom IC-W32E banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_IcomICW32E) Testing Icom IC-W32E brute force ... ok test_clone (tests.TestCase_IcomICW32E) Testing Icom IC-W32E clone ... ok test_copy_all (tests.TestCase_IcomICW32E) Testing Icom IC-W32E copy all ... ok test_detect (tests.TestCase_IcomICW32E) Testing Icom IC-W32E detect ... ok test_edges (tests.TestCase_IcomICW32E) Testing Icom IC-W32E edges ... ok test_settings (tests.TestCase_IcomICW32E) Testing Icom IC-W32E settings ... skipped 'Settings not supported' test_banks (tests.TestCase_JetstreamJT270M) Testing Jetstream JT270M banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_JetstreamJT270M) Testing Jetstream JT270M brute force ... ok test_clone (tests.TestCase_JetstreamJT270M) Testing Jetstream JT270M clone ... ok test_copy_all (tests.TestCase_JetstreamJT270M) Testing Jetstream JT270M copy all ... ok test_detect (tests.TestCase_JetstreamJT270M) Testing Jetstream JT270M detect ... ok test_edges (tests.TestCase_JetstreamJT270M) Testing Jetstream JT270M edges ... ok test_settings (tests.TestCase_JetstreamJT270M) Testing Jetstream JT270M settings ... ok test_banks (tests.TestCase_YaesuFT8900) Testing Yaesu FT-8900 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT8900) Testing Yaesu FT-8900 brute force ... ok test_clone (tests.TestCase_YaesuFT8900) Testing Yaesu FT-8900 clone ... ok test_copy_all (tests.TestCase_YaesuFT8900) Testing Yaesu FT-8900 copy all ... ok test_detect (tests.TestCase_YaesuFT8900) Testing Yaesu FT-8900 detect ... ok test_edges (tests.TestCase_YaesuFT8900) Testing Yaesu FT-8900 edges ... ok test_settings (tests.TestCase_YaesuFT8900) Testing Yaesu FT-8900 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_TYTTH9000144) Testing TYT TH9000_144 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TYTTH9000144) Testing TYT TH9000_144 brute force ... ok test_clone (tests.TestCase_TYTTH9000144) Testing TYT TH9000_144 clone ... ok test_copy_all (tests.TestCase_TYTTH9000144) Testing TYT TH9000_144 copy all ... ok test_detect (tests.TestCase_TYTTH9000144) Testing TYT TH9000_144 detect ... ok test_edges (tests.TestCase_TYTTH9000144) Testing TYT TH9000_144 edges ... ok test_settings (tests.TestCase_TYTTH9000144) Testing TYT TH9000_144 settings ... ok test_banks (tests.TestCase_TYTTHUVF1) Testing TYT TH-UVF1 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TYTTHUVF1) Testing TYT TH-UVF1 brute force ... ok test_clone (tests.TestCase_TYTTHUVF1) Testing TYT TH-UVF1 clone ... ok test_copy_all (tests.TestCase_TYTTHUVF1) Testing TYT TH-UVF1 copy all ... ok test_detect (tests.TestCase_TYTTHUVF1) Testing TYT TH-UVF1 detect ... ok test_edges (tests.TestCase_TYTTHUVF1) Testing TYT TH-UVF1 edges ... ok test_settings (tests.TestCase_TYTTHUVF1) Testing TYT TH-UVF1 settings ... ok test_banks (tests.TestCase_YaesuFT2D) Testing Yaesu FT2D banks ... ok test_brute_force (tests.TestCase_YaesuFT2D) Testing Yaesu FT2D brute force ... ok test_clone (tests.TestCase_YaesuFT2D) Testing Yaesu FT2D clone ... ok test_copy_all (tests.TestCase_YaesuFT2D) Testing Yaesu FT2D copy all ... ok test_detect (tests.TestCase_YaesuFT2D) Testing Yaesu FT2D detect ... ok test_edges (tests.TestCase_YaesuFT2D) Testing Yaesu FT2D edges ... ok test_settings (tests.TestCase_YaesuFT2D) Testing Yaesu FT2D settings ... ok test_banks (tests.TestCase_YaesuFT857897US) Testing Yaesu FT-857/897 (US) banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT857897US) Testing Yaesu FT-857/897 (US) brute force ... ok test_clone (tests.TestCase_YaesuFT857897US) Testing Yaesu FT-857/897 (US) clone ... ok test_copy_all (tests.TestCase_YaesuFT857897US) Testing Yaesu FT-857/897 (US) copy all ... ok test_detect (tests.TestCase_YaesuFT857897US) Testing Yaesu FT-857/897 (US) detect ... ok test_edges (tests.TestCase_YaesuFT857897US) Testing Yaesu FT-857/897 (US) edges ... ok test_settings (tests.TestCase_YaesuFT857897US) Testing Yaesu FT-857/897 (US) settings ... ok test_banks (tests.TestCase_YaesuFTM3200D) Testing Yaesu FTM-3200D banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFTM3200D) Testing Yaesu FTM-3200D brute force ... ok test_clone (tests.TestCase_YaesuFTM3200D) Testing Yaesu FTM-3200D clone ... ok test_copy_all (tests.TestCase_YaesuFTM3200D) Testing Yaesu FTM-3200D copy all ... ok test_detect (tests.TestCase_YaesuFTM3200D) Testing Yaesu FTM-3200D detect ... ok test_edges (tests.TestCase_YaesuFTM3200D) Testing Yaesu FTM-3200D edges ... ok test_settings (tests.TestCase_YaesuFTM3200D) Testing Yaesu FTM-3200D settings ... skipped 'Settings not supported' test_banks (tests.TestCase_YaesuFT60) Testing Yaesu FT-60 banks ... ok test_brute_force (tests.TestCase_YaesuFT60) Testing Yaesu FT-60 brute force ... ok test_clone (tests.TestCase_YaesuFT60) Testing Yaesu FT-60 clone ... ok test_copy_all (tests.TestCase_YaesuFT60) Testing Yaesu FT-60 copy all ... ok test_detect (tests.TestCase_YaesuFT60) Testing Yaesu FT-60 detect ... ok test_edges (tests.TestCase_YaesuFT60) Testing Yaesu FT-60 edges ... ok test_settings (tests.TestCase_YaesuFT60) Testing Yaesu FT-60 settings ... ok test_banks (tests.TestCase_IcomIC2100H) Testing Icom IC-2100H banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_IcomIC2100H) Testing Icom IC-2100H brute force ... ok test_clone (tests.TestCase_IcomIC2100H) Testing Icom IC-2100H clone ... ok test_copy_all (tests.TestCase_IcomIC2100H) Testing Icom IC-2100H copy all ... ok test_detect (tests.TestCase_IcomIC2100H) Testing Icom IC-2100H detect ... ok test_edges (tests.TestCase_IcomIC2100H) Testing Icom IC-2100H edges ... ok test_settings (tests.TestCase_IcomIC2100H) Testing Icom IC-2100H settings ... skipped 'Settings not supported' test_banks (tests.TestCase_YaesuFTM350) Testing Yaesu FTM-350 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFTM350) Testing Yaesu FTM-350 brute force ... ok test_clone (tests.TestCase_YaesuFTM350) Testing Yaesu FTM-350 clone ... ok test_copy_all (tests.TestCase_YaesuFTM350) Testing Yaesu FTM-350 copy all ... ok test_detect (tests.TestCase_YaesuFTM350) Testing Yaesu FTM-350 detect ... ok test_edges (tests.TestCase_YaesuFTM350) Testing Yaesu FTM-350 edges ... ok test_settings (tests.TestCase_YaesuFTM350) Testing Yaesu FTM-350 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_LeixenVV898) Testing Leixen VV-898 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_LeixenVV898) Testing Leixen VV-898 brute force ... ok test_clone (tests.TestCase_LeixenVV898) Testing Leixen VV-898 clone ... ok test_copy_all (tests.TestCase_LeixenVV898) Testing Leixen VV-898 copy all ... ok test_detect (tests.TestCase_LeixenVV898) Testing Leixen VV-898 detect ... ok test_edges (tests.TestCase_LeixenVV898) Testing Leixen VV-898 edges ... ok test_settings (tests.TestCase_LeixenVV898) Testing Leixen VV-898 settings ... ok test_banks (tests.TestCase_QYTKT7900D) Testing QYT KT7900D banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_QYTKT7900D) Testing QYT KT7900D brute force ... ok test_clone (tests.TestCase_QYTKT7900D) Testing QYT KT7900D clone ... ok test_copy_all (tests.TestCase_QYTKT7900D) Testing QYT KT7900D copy all ... ok test_detect (tests.TestCase_QYTKT7900D) Testing QYT KT7900D detect ... ok test_edges (tests.TestCase_QYTKT7900D) Testing QYT KT7900D edges ... ok test_settings (tests.TestCase_QYTKT7900D) Testing QYT KT7900D settings ... ok test_banks (tests.TestCase_WouxunKGUVD1P) Testing Wouxun KG-UVD1P banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_WouxunKGUVD1P) Testing Wouxun KG-UVD1P brute force ... ok test_clone (tests.TestCase_WouxunKGUVD1P) Testing Wouxun KG-UVD1P clone ... ok test_copy_all (tests.TestCase_WouxunKGUVD1P) Testing Wouxun KG-UVD1P copy all ... ok test_detect (tests.TestCase_WouxunKGUVD1P) Testing Wouxun KG-UVD1P detect ... ok test_edges (tests.TestCase_WouxunKGUVD1P) Testing Wouxun KG-UVD1P edges ... ok test_settings (tests.TestCase_WouxunKGUVD1P) Testing Wouxun KG-UVD1P settings ... ok test_banks (tests.TestCase_IcomICV82U82) Testing Icom IC-V82/U82 banks ... ok test_brute_force (tests.TestCase_IcomICV82U82) Testing Icom IC-V82/U82 brute force ... ok test_clone (tests.TestCase_IcomICV82U82) Testing Icom IC-V82/U82 clone ... ok test_copy_all (tests.TestCase_IcomICV82U82) Testing Icom IC-V82/U82 copy all ... ok test_detect (tests.TestCase_IcomICV82U82) Testing Icom IC-V82/U82 detect ... ok test_edges (tests.TestCase_IcomICV82U82) Testing Icom IC-V82/U82 edges ... ok test_settings (tests.TestCase_IcomICV82U82) Testing Icom IC-V82/U82 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_IcomICW32A) Testing Icom IC-W32A banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_IcomICW32A) Testing Icom IC-W32A brute force ... ok test_clone (tests.TestCase_IcomICW32A) Testing Icom IC-W32A clone ... ok test_copy_all (tests.TestCase_IcomICW32A) Testing Icom IC-W32A copy all ... ok test_detect (tests.TestCase_IcomICW32A) Testing Icom IC-W32A detect ... ok test_edges (tests.TestCase_IcomICW32A) Testing Icom IC-W32A edges ... ok test_settings (tests.TestCase_IcomICW32A) Testing Icom IC-W32A settings ... skipped 'Settings not supported' test_banks (tests.TestCase_YaesuVX3) Testing Yaesu VX-3 banks ... ok test_brute_force (tests.TestCase_YaesuVX3) Testing Yaesu VX-3 brute force ... ok test_clone (tests.TestCase_YaesuVX3) Testing Yaesu VX-3 clone ... ok test_copy_all (tests.TestCase_YaesuVX3) Testing Yaesu VX-3 copy all ... ok test_detect (tests.TestCase_YaesuVX3) Testing Yaesu VX-3 detect ... ok test_edges (tests.TestCase_YaesuVX3) Testing Yaesu VX-3 edges ... ok test_settings (tests.TestCase_YaesuVX3) Testing Yaesu VX-3 settings ... ok test_banks (tests.TestCase_FeidaxinFD268B) Testing Feidaxin FD-268B banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_FeidaxinFD268B) Testing Feidaxin FD-268B brute force ... ok test_clone (tests.TestCase_FeidaxinFD268B) Testing Feidaxin FD-268B clone ... ok test_copy_all (tests.TestCase_FeidaxinFD268B) Testing Feidaxin FD-268B copy all ... ok test_detect (tests.TestCase_FeidaxinFD268B) Testing Feidaxin FD-268B detect ... ok test_edges (tests.TestCase_FeidaxinFD268B) Testing Feidaxin FD-268B edges ... ok test_settings (tests.TestCase_FeidaxinFD268B) Testing Feidaxin FD-268B settings ... ok test_banks (tests.TestCase_BaofengUV5R) Testing Baofeng UV-5R banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BaofengUV5R) Testing Baofeng UV-5R brute force ... ok test_clone (tests.TestCase_BaofengUV5R) Testing Baofeng UV-5R clone ... ok test_copy_all (tests.TestCase_BaofengUV5R) Testing Baofeng UV-5R copy all ... ok test_detect (tests.TestCase_BaofengUV5R) Testing Baofeng UV-5R detect ... ok test_edges (tests.TestCase_BaofengUV5R) Testing Baofeng UV-5R edges ... ok test_settings (tests.TestCase_BaofengUV5R) Testing Baofeng UV-5R settings ... ok test_banks (tests.TestCase_BaofengUVB5) Testing Baofeng UV-B5 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BaofengUVB5) Testing Baofeng UV-B5 brute force ... ok test_clone (tests.TestCase_BaofengUVB5) Testing Baofeng UV-B5 clone ... ok test_copy_all (tests.TestCase_BaofengUVB5) Testing Baofeng UV-B5 copy all ... ok test_detect (tests.TestCase_BaofengUVB5) Testing Baofeng UV-B5 detect ... ok test_edges (tests.TestCase_BaofengUVB5) Testing Baofeng UV-B5 edges ... ok test_settings (tests.TestCase_BaofengUVB5) Testing Baofeng UV-B5 settings ... ok test_banks (tests.TestCase_BaofengBF888) Testing Baofeng BF-888 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BaofengBF888) Testing Baofeng BF-888 brute force ... ok test_clone (tests.TestCase_BaofengBF888) Testing Baofeng BF-888 clone ... ok test_copy_all (tests.TestCase_BaofengBF888) Testing Baofeng BF-888 copy all ... ok test_detect (tests.TestCase_BaofengBF888) Testing Baofeng BF-888 detect ... ok test_edges (tests.TestCase_BaofengBF888) Testing Baofeng BF-888 edges ... ok test_settings (tests.TestCase_BaofengBF888) Testing Baofeng BF-888 settings ... ok test_banks (tests.TestCase_LUITONLT725UV) Testing LUITON LT-725UV banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_LUITONLT725UV) Testing LUITON LT-725UV brute force ... ok test_clone (tests.TestCase_LUITONLT725UV) Testing LUITON LT-725UV clone ... ok test_copy_all (tests.TestCase_LUITONLT725UV) Testing LUITON LT-725UV copy all ... ok test_detect (tests.TestCase_LUITONLT725UV) Testing LUITON LT-725UV detect ... ok test_edges (tests.TestCase_LUITONLT725UV) Testing LUITON LT-725UV edges ... ok test_settings (tests.TestCase_LUITONLT725UV) Testing LUITON LT-725UV settings ... ok test_banks (tests.TestCase_YaesuFT817) Testing Yaesu FT-817 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT817) Testing Yaesu FT-817 brute force ... ok test_clone (tests.TestCase_YaesuFT817) Testing Yaesu FT-817 clone ... ok test_copy_all (tests.TestCase_YaesuFT817) Testing Yaesu FT-817 copy all ... ok test_detect (tests.TestCase_YaesuFT817) Testing Yaesu FT-817 detect ... ok test_edges (tests.TestCase_YaesuFT817) Testing Yaesu FT-817 edges ... ok test_settings (tests.TestCase_YaesuFT817) Testing Yaesu FT-817 settings ... ok test_banks (tests.TestCase_PolmarDB50M) Testing Polmar DB-50M banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_PolmarDB50M) Testing Polmar DB-50M brute force ... ok test_clone (tests.TestCase_PolmarDB50M) Testing Polmar DB-50M clone ... ok test_copy_all (tests.TestCase_PolmarDB50M) Testing Polmar DB-50M copy all ... ok test_detect (tests.TestCase_PolmarDB50M) Testing Polmar DB-50M detect ... ok test_edges (tests.TestCase_PolmarDB50M) Testing Polmar DB-50M edges ... ok test_settings (tests.TestCase_PolmarDB50M) Testing Polmar DB-50M settings ... ok test_banks (tests.TestCase_KYDNC630A) Testing KYD NC-630A banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_KYDNC630A) Testing KYD NC-630A brute force ... ok test_clone (tests.TestCase_KYDNC630A) Testing KYD NC-630A clone ... ok test_copy_all (tests.TestCase_KYDNC630A) Testing KYD NC-630A copy all ... ok test_detect (tests.TestCase_KYDNC630A) Testing KYD NC-630A detect ... ok test_edges (tests.TestCase_KYDNC630A) Testing KYD NC-630A edges ... ok test_settings (tests.TestCase_KYDNC630A) Testing KYD NC-630A settings ... ok test_banks (tests.TestCase_BTECHUV5X3) Testing BTECH UV-5X3 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHUV5X3) Testing BTECH UV-5X3 brute force ... ok test_clone (tests.TestCase_BTECHUV5X3) Testing BTECH UV-5X3 clone ... ok test_copy_all (tests.TestCase_BTECHUV5X3) Testing BTECH UV-5X3 copy all ... ok test_detect (tests.TestCase_BTECHUV5X3) Testing BTECH UV-5X3 detect ... ok test_edges (tests.TestCase_BTECHUV5X3) Testing BTECH UV-5X3 edges ... ok test_settings (tests.TestCase_BTECHUV5X3) Testing BTECH UV-5X3 settings ... ok test_banks (tests.TestCase_BTECHUV50X3) Testing BTECH UV-50X3 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHUV50X3) Testing BTECH UV-50X3 brute force ... ok test_clone (tests.TestCase_BTECHUV50X3) Testing BTECH UV-50X3 clone ... ok test_copy_all (tests.TestCase_BTECHUV50X3) Testing BTECH UV-50X3 copy all ... ok test_detect (tests.TestCase_BTECHUV50X3) Testing BTECH UV-50X3 detect ... ok test_edges (tests.TestCase_BTECHUV50X3) Testing BTECH UV-50X3 edges ... ok test_settings (tests.TestCase_BTECHUV50X3) Testing BTECH UV-50X3 settings ... ok test_banks (tests.TestCase_VertexStandardVXA700) Testing Vertex Standard VXA-700 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_VertexStandardVXA700) Testing Vertex Standard VXA-700 brute force ... ok test_clone (tests.TestCase_VertexStandardVXA700) Testing Vertex Standard VXA-700 clone ... ok test_copy_all (tests.TestCase_VertexStandardVXA700) Testing Vertex Standard VXA-700 copy all ... ok test_detect (tests.TestCase_VertexStandardVXA700) Testing Vertex Standard VXA-700 detect ... ok test_edges (tests.TestCase_VertexStandardVXA700) Testing Vertex Standard VXA-700 edges ... ok test_settings (tests.TestCase_VertexStandardVXA700) Testing Vertex Standard VXA-700 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_YaesuFT1802M) Testing Yaesu FT-1802M banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT1802M) Testing Yaesu FT-1802M brute force ... ok test_clone (tests.TestCase_YaesuFT1802M) Testing Yaesu FT-1802M clone ... ok test_copy_all (tests.TestCase_YaesuFT1802M) Testing Yaesu FT-1802M copy all ... ok test_detect (tests.TestCase_YaesuFT1802M) Testing Yaesu FT-1802M detect ... ok test_edges (tests.TestCase_YaesuFT1802M) Testing Yaesu FT-1802M edges ... ok test_settings (tests.TestCase_YaesuFT1802M) Testing Yaesu FT-1802M settings ... skipped 'Settings not supported' test_banks (tests.TestCase_IcomIC2720H) Testing Icom IC-2720H banks ... ok test_brute_force (tests.TestCase_IcomIC2720H) Testing Icom IC-2720H brute force ... ok test_clone (tests.TestCase_IcomIC2720H) Testing Icom IC-2720H clone ... ok test_copy_all (tests.TestCase_IcomIC2720H) Testing Icom IC-2720H copy all ... ok test_detect (tests.TestCase_IcomIC2720H) Testing Icom IC-2720H detect ... ok test_edges (tests.TestCase_IcomIC2720H) Testing Icom IC-2720H edges ... ok test_settings (tests.TestCase_IcomIC2720H) Testing Icom IC-2720H settings ... skipped 'Settings not supported' test_banks (tests.TestCase_BTECHUV25X4) Testing BTECH UV-25X4 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHUV25X4) Testing BTECH UV-25X4 brute force ... ok test_clone (tests.TestCase_BTECHUV25X4) Testing BTECH UV-25X4 clone ... ok test_copy_all (tests.TestCase_BTECHUV25X4) Testing BTECH UV-25X4 copy all ... ok test_detect (tests.TestCase_BTECHUV25X4) Testing BTECH UV-25X4 detect ... ok test_edges (tests.TestCase_BTECHUV25X4) Testing BTECH UV-25X4 edges ... ok test_settings (tests.TestCase_BTECHUV25X4) Testing BTECH UV-25X4 settings ... ok test_banks (tests.TestCase_IcomID51) Testing Icom ID-51 banks ... ok test_brute_force (tests.TestCase_IcomID51) Testing Icom ID-51 brute force ... ok test_clone (tests.TestCase_IcomID51) Testing Icom ID-51 clone ... ok test_copy_all (tests.TestCase_IcomID51) Testing Icom ID-51 copy all ... ok test_detect (tests.TestCase_IcomID51) Testing Icom ID-51 detect ... ok test_edges (tests.TestCase_IcomID51) Testing Icom ID-51 edges ... ok test_settings (tests.TestCase_IcomID51) Testing Icom ID-51 settings ... ok test_banks (tests.TestCase_KenwoodTHD72clonemode) Testing Kenwood TH-D72 (clone mode) banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_KenwoodTHD72clonemode) Testing Kenwood TH-D72 (clone mode) brute force ... ok test_clone (tests.TestCase_KenwoodTHD72clonemode) Testing Kenwood TH-D72 (clone mode) clone ... ok test_copy_all (tests.TestCase_KenwoodTHD72clonemode) Testing Kenwood TH-D72 (clone mode) copy all ... ok test_detect (tests.TestCase_KenwoodTHD72clonemode) Testing Kenwood TH-D72 (clone mode) detect ... ok test_edges (tests.TestCase_KenwoodTHD72clonemode) Testing Kenwood TH-D72 (clone mode) edges ... ok test_settings (tests.TestCase_KenwoodTHD72clonemode) Testing Kenwood TH-D72 (clone mode) settings ... ok test_banks (tests.TestCase_YaesuVX8DR) Testing Yaesu VX-8DR banks ... ok test_brute_force (tests.TestCase_YaesuVX8DR) Testing Yaesu VX-8DR brute force ... ok test_clone (tests.TestCase_YaesuVX8DR) Testing Yaesu VX-8DR clone ... ok test_copy_all (tests.TestCase_YaesuVX8DR) Testing Yaesu VX-8DR copy all ... ok test_detect (tests.TestCase_YaesuVX8DR) Testing Yaesu VX-8DR detect ... ok test_edges (tests.TestCase_YaesuVX8DR) Testing Yaesu VX-8DR edges ... ok test_settings (tests.TestCase_YaesuVX8DR) Testing Yaesu VX-8DR settings ... ok test_banks (tests.TestCase_RadtelT18) Testing Radtel T18 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RadtelT18) Testing Radtel T18 brute force ... ok test_clone (tests.TestCase_RadtelT18) Testing Radtel T18 clone ... ok test_copy_all (tests.TestCase_RadtelT18) Testing Radtel T18 copy all ... ok test_detect (tests.TestCase_RadtelT18) Testing Radtel T18 detect ... ok test_edges (tests.TestCase_RadtelT18) Testing Radtel T18 edges ... ok test_settings (tests.TestCase_RadtelT18) Testing Radtel T18 settings ... ok test_banks (tests.TestCase_BaofengF11) Testing Baofeng F-11 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BaofengF11) Testing Baofeng F-11 brute force ... ok test_clone (tests.TestCase_BaofengF11) Testing Baofeng F-11 clone ... ok test_copy_all (tests.TestCase_BaofengF11) Testing Baofeng F-11 copy all ... ok test_detect (tests.TestCase_BaofengF11) Testing Baofeng F-11 detect ... ok test_edges (tests.TestCase_BaofengF11) Testing Baofeng F-11 edges ... ok test_settings (tests.TestCase_BaofengF11) Testing Baofeng F-11 settings ... ok test_banks (tests.TestCase_FeidaxinFD268A) Testing Feidaxin FD-268A banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_FeidaxinFD268A) Testing Feidaxin FD-268A brute force ... ok test_clone (tests.TestCase_FeidaxinFD268A) Testing Feidaxin FD-268A clone ... ok test_copy_all (tests.TestCase_FeidaxinFD268A) Testing Feidaxin FD-268A copy all ... ok test_detect (tests.TestCase_FeidaxinFD268A) Testing Feidaxin FD-268A detect ... ok test_edges (tests.TestCase_FeidaxinFD268A) Testing Feidaxin FD-268A edges ... ok test_settings (tests.TestCase_FeidaxinFD268A) Testing Feidaxin FD-268A settings ... ok test_banks (tests.TestCase_AlincoDJ175) Testing Alinco DJ175 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_AlincoDJ175) Testing Alinco DJ175 brute force ... ok test_clone (tests.TestCase_AlincoDJ175) Testing Alinco DJ175 clone ... ok test_copy_all (tests.TestCase_AlincoDJ175) Testing Alinco DJ175 copy all ... ok test_detect (tests.TestCase_AlincoDJ175) Testing Alinco DJ175 detect ... ok test_edges (tests.TestCase_AlincoDJ175) Testing Alinco DJ175 edges ... ok test_settings (tests.TestCase_AlincoDJ175) Testing Alinco DJ175 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_BTECHGMRSV1) Testing BTECH GMRS-V1 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_BTECHGMRSV1) Testing BTECH GMRS-V1 brute force ... ok test_clone (tests.TestCase_BTECHGMRSV1) Testing BTECH GMRS-V1 clone ... ok test_copy_all (tests.TestCase_BTECHGMRSV1) Testing BTECH GMRS-V1 copy all ... ok test_detect (tests.TestCase_BTECHGMRSV1) Testing BTECH GMRS-V1 detect ... ok test_edges (tests.TestCase_BTECHGMRSV1) Testing BTECH GMRS-V1 edges ... ok test_settings (tests.TestCase_BTECHGMRSV1) Testing BTECH GMRS-V1 settings ... ok test_banks (tests.TestCase_RetevisRT22) Testing Retevis RT22 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RetevisRT22) Testing Retevis RT22 brute force ... ok test_clone (tests.TestCase_RetevisRT22) Testing Retevis RT22 clone ... ok test_copy_all (tests.TestCase_RetevisRT22) Testing Retevis RT22 copy all ... ok test_detect (tests.TestCase_RetevisRT22) Testing Retevis RT22 detect ... ok test_edges (tests.TestCase_RetevisRT22) Testing Retevis RT22 edges ... ok test_settings (tests.TestCase_RetevisRT22) Testing Retevis RT22 settings ... ok test_banks (tests.TestCase_YaesuVX8R) Testing Yaesu VX-8R banks ... ok test_brute_force (tests.TestCase_YaesuVX8R) Testing Yaesu VX-8R brute force ... ok test_clone (tests.TestCase_YaesuVX8R) Testing Yaesu VX-8R clone ... ok test_copy_all (tests.TestCase_YaesuVX8R) Testing Yaesu VX-8R copy all ... ok test_detect (tests.TestCase_YaesuVX8R) Testing Yaesu VX-8R detect ... ok test_edges (tests.TestCase_YaesuVX8R) Testing Yaesu VX-8R edges ... ok test_settings (tests.TestCase_YaesuVX8R) Testing Yaesu VX-8R settings ... ok test_banks (tests.TestCase_AlincoDJG7EG) Testing Alinco DJ-G7EG banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_AlincoDJG7EG) Testing Alinco DJ-G7EG brute force ... ok test_clone (tests.TestCase_AlincoDJG7EG) Testing Alinco DJ-G7EG clone ... ok test_copy_all (tests.TestCase_AlincoDJG7EG) Testing Alinco DJ-G7EG copy all ... ok test_detect (tests.TestCase_AlincoDJG7EG) Testing Alinco DJ-G7EG detect ... ok test_edges (tests.TestCase_AlincoDJG7EG) Testing Alinco DJ-G7EG edges ... ok test_settings (tests.TestCase_AlincoDJG7EG) Testing Alinco DJ-G7EG settings ... skipped 'Settings not supported' test_banks (tests.TestCase_LeixenVV898S) Testing Leixen VV-898S banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_LeixenVV898S) Testing Leixen VV-898S brute force ... ok test_clone (tests.TestCase_LeixenVV898S) Testing Leixen VV-898S clone ... ok test_copy_all (tests.TestCase_LeixenVV898S) Testing Leixen VV-898S copy all ... ok test_detect (tests.TestCase_LeixenVV898S) Testing Leixen VV-898S detect ... ok test_edges (tests.TestCase_LeixenVV898S) Testing Leixen VV-898S edges ... ok test_settings (tests.TestCase_LeixenVV898S) Testing Leixen VV-898S settings ... ok test_banks (tests.TestCase_KYDIP620) Testing KYD IP-620 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_KYDIP620) Testing KYD IP-620 brute force ... ok test_clone (tests.TestCase_KYDIP620) Testing KYD IP-620 clone ... ok test_copy_all (tests.TestCase_KYDIP620) Testing KYD IP-620 copy all ... ok test_detect (tests.TestCase_KYDIP620) Testing KYD IP-620 detect ... ok test_edges (tests.TestCase_KYDIP620) Testing KYD IP-620 edges ... ok test_settings (tests.TestCase_KYDIP620) Testing KYD IP-620 settings ... ok test_banks (tests.TestCase_YaesuFT78007900) Testing Yaesu FT-7800/7900 banks ... ok test_brute_force (tests.TestCase_YaesuFT78007900) Testing Yaesu FT-7800/7900 brute force ... ok test_clone (tests.TestCase_YaesuFT78007900) Testing Yaesu FT-7800/7900 clone ... ok test_copy_all (tests.TestCase_YaesuFT78007900) Testing Yaesu FT-7800/7900 copy all ... ok test_detect (tests.TestCase_YaesuFT78007900) Testing Yaesu FT-7800/7900 detect ... ok test_edges (tests.TestCase_YaesuFT78007900) Testing Yaesu FT-7800/7900 edges ... ok test_settings (tests.TestCase_YaesuFT78007900) Testing Yaesu FT-7800/7900 settings ... ok test_banks (tests.TestCase_YaesuVX2) Testing Yaesu VX-2 banks ... ok test_brute_force (tests.TestCase_YaesuVX2) Testing Yaesu VX-2 brute force ... ok test_clone (tests.TestCase_YaesuVX2) Testing Yaesu VX-2 clone ... ok test_copy_all (tests.TestCase_YaesuVX2) Testing Yaesu VX-2 copy all ... ok test_detect (tests.TestCase_YaesuVX2) Testing Yaesu VX-2 detect ... ok test_edges (tests.TestCase_YaesuVX2) Testing Yaesu VX-2 edges ... ok test_settings (tests.TestCase_YaesuVX2) Testing Yaesu VX-2 settings ... ok test_banks (tests.TestCase_WouxunKGUV8DPlus) Testing Wouxun KG-UV8D Plus banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_WouxunKGUV8DPlus) Testing Wouxun KG-UV8D Plus brute force ... ok test_clone (tests.TestCase_WouxunKGUV8DPlus) Testing Wouxun KG-UV8D Plus clone ... ok test_copy_all (tests.TestCase_WouxunKGUV8DPlus) Testing Wouxun KG-UV8D Plus copy all ... ok test_detect (tests.TestCase_WouxunKGUV8DPlus) Testing Wouxun KG-UV8D Plus detect ... ok test_edges (tests.TestCase_WouxunKGUV8DPlus) Testing Wouxun KG-UV8D Plus edges ... ok test_settings (tests.TestCase_WouxunKGUV8DPlus) Testing Wouxun KG-UV8D Plus settings ... ok test_banks (tests.TestCase_WouxunKGUV8D) Testing Wouxun KG-UV8D banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_WouxunKGUV8D) Testing Wouxun KG-UV8D brute force ... ok test_clone (tests.TestCase_WouxunKGUV8D) Testing Wouxun KG-UV8D clone ... ok test_copy_all (tests.TestCase_WouxunKGUV8D) Testing Wouxun KG-UV8D copy all ... ok test_detect (tests.TestCase_WouxunKGUV8D) Testing Wouxun KG-UV8D detect ... ok test_edges (tests.TestCase_WouxunKGUV8D) Testing Wouxun KG-UV8D edges ... ok test_settings (tests.TestCase_WouxunKGUV8D) Testing Wouxun KG-UV8D settings ... ok test_banks (tests.TestCase_KenwoodTK272G) Testing Kenwood TK-272G banks ... ok test_brute_force (tests.TestCase_KenwoodTK272G) Testing Kenwood TK-272G brute force ... ok test_clone (tests.TestCase_KenwoodTK272G) Testing Kenwood TK-272G clone ... ok test_copy_all (tests.TestCase_KenwoodTK272G) Testing Kenwood TK-272G copy all ... ok test_detect (tests.TestCase_KenwoodTK272G) Testing Kenwood TK-272G detect ... ok test_edges (tests.TestCase_KenwoodTK272G) Testing Kenwood TK-272G edges ... ok test_settings (tests.TestCase_KenwoodTK272G) Testing Kenwood TK-272G settings ... ok test_banks (tests.TestCase_QYTKT8900D) Testing QYT KT8900D banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_QYTKT8900D) Testing QYT KT8900D brute force ... ok test_clone (tests.TestCase_QYTKT8900D) Testing QYT KT8900D clone ... ok test_copy_all (tests.TestCase_QYTKT8900D) Testing QYT KT8900D copy all ... ok test_detect (tests.TestCase_QYTKT8900D) Testing QYT KT8900D detect ... ok test_edges (tests.TestCase_QYTKT8900D) Testing QYT KT8900D edges ... ok test_settings (tests.TestCase_QYTKT8900D) Testing QYT KT8900D settings ... ok test_banks (tests.TestCase_KenwoodTK760G) Testing Kenwood TK-760G banks ... ok test_brute_force (tests.TestCase_KenwoodTK760G) Testing Kenwood TK-760G brute force ... ok test_clone (tests.TestCase_KenwoodTK760G) Testing Kenwood TK-760G clone ... ok test_copy_all (tests.TestCase_KenwoodTK760G) Testing Kenwood TK-760G copy all ... ok test_detect (tests.TestCase_KenwoodTK760G) Testing Kenwood TK-760G detect ... ok test_edges (tests.TestCase_KenwoodTK760G) Testing Kenwood TK-760G edges ... ok test_settings (tests.TestCase_KenwoodTK760G) Testing Kenwood TK-760G settings ... ok test_banks (tests.TestCase_YaesuVX6) Testing Yaesu VX-6 banks ... ok test_brute_force (tests.TestCase_YaesuVX6) Testing Yaesu VX-6 brute force ... ok test_clone (tests.TestCase_YaesuVX6) Testing Yaesu VX-6 clone ... ok test_copy_all (tests.TestCase_YaesuVX6) Testing Yaesu VX-6 copy all ... ok test_detect (tests.TestCase_YaesuVX6) Testing Yaesu VX-6 detect ... ok test_edges (tests.TestCase_YaesuVX6) Testing Yaesu VX-6 edges ... ok test_settings (tests.TestCase_YaesuVX6) Testing Yaesu VX-6 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_IcomIC208H) Testing Icom IC-208H banks ... ok test_brute_force (tests.TestCase_IcomIC208H) Testing Icom IC-208H brute force ... ok test_clone (tests.TestCase_IcomIC208H) Testing Icom IC-208H clone ... ok test_copy_all (tests.TestCase_IcomIC208H) Testing Icom IC-208H copy all ... ok test_detect (tests.TestCase_IcomIC208H) Testing Icom IC-208H detect ... ok test_edges (tests.TestCase_IcomIC208H) Testing Icom IC-208H edges ... ok test_settings (tests.TestCase_IcomIC208H) Testing Icom IC-208H settings ... skipped 'Settings not supported' test_banks (tests.TestCase_IcomID31A) Testing Icom ID-31A banks ... ok test_brute_force (tests.TestCase_IcomID31A) Testing Icom ID-31A brute force ... ok test_clone (tests.TestCase_IcomID31A) Testing Icom ID-31A clone ... ok test_copy_all (tests.TestCase_IcomID31A) Testing Icom ID-31A copy all ... ok test_detect (tests.TestCase_IcomID31A) Testing Icom ID-31A detect ... ok test_edges (tests.TestCase_IcomID31A) Testing Icom ID-31A edges ... ok test_settings (tests.TestCase_IcomID31A) Testing Icom ID-31A settings ... ok test_banks (tests.TestCase_TYTTH7800) Testing TYT TH-7800 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TYTTH7800) Testing TYT TH-7800 brute force ... ok test_clone (tests.TestCase_TYTTH7800) Testing TYT TH-7800 clone ... ok test_copy_all (tests.TestCase_TYTTH7800) Testing TYT TH-7800 copy all ... ok test_detect (tests.TestCase_TYTTH7800) Testing TYT TH-7800 detect ... ok test_edges (tests.TestCase_TYTTH7800) Testing TYT TH-7800 edges ... ok test_settings (tests.TestCase_TYTTH7800) Testing TYT TH-7800 settings ... ok test_banks (tests.TestCase_IcomIC2200H) Testing Icom IC-2200H banks ... ok test_brute_force (tests.TestCase_IcomIC2200H) Testing Icom IC-2200H brute force ... ok test_clone (tests.TestCase_IcomIC2200H) Testing Icom IC-2200H clone ... ok test_copy_all (tests.TestCase_IcomIC2200H) Testing Icom IC-2200H copy all ... ok test_detect (tests.TestCase_IcomIC2200H) Testing Icom IC-2200H detect ... ok test_edges (tests.TestCase_IcomIC2200H) Testing Icom IC-2200H edges ... ok test_settings (tests.TestCase_IcomIC2200H) Testing Icom IC-2200H settings ... ok test_banks (tests.TestCase_PuxingPX888K) Testing Puxing PX-888K banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_PuxingPX888K) Testing Puxing PX-888K brute force ... ok test_clone (tests.TestCase_PuxingPX888K) Testing Puxing PX-888K clone ... ok test_copy_all (tests.TestCase_PuxingPX888K) Testing Puxing PX-888K copy all ... ok test_detect (tests.TestCase_PuxingPX888K) Testing Puxing PX-888K detect ... ok test_edges (tests.TestCase_PuxingPX888K) Testing Puxing PX-888K edges ... ok test_settings (tests.TestCase_PuxingPX888K) Testing Puxing PX-888K settings ... ok test_banks (tests.TestCase_YaesuFT857897) Testing Yaesu FT-857/897 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT857897) Testing Yaesu FT-857/897 brute force ... ok test_clone (tests.TestCase_YaesuFT857897) Testing Yaesu FT-857/897 clone ... ok test_copy_all (tests.TestCase_YaesuFT857897) Testing Yaesu FT-857/897 copy all ... ok test_detect (tests.TestCase_YaesuFT857897) Testing Yaesu FT-857/897 detect ... ok test_edges (tests.TestCase_YaesuFT857897) Testing Yaesu FT-857/897 edges ... ok test_settings (tests.TestCase_YaesuFT857897) Testing Yaesu FT-857/897 settings ... ok test_banks (tests.TestCase_IcomIC2730A) Testing Icom IC-2730A banks ... ok test_brute_force (tests.TestCase_IcomIC2730A) Testing Icom IC-2730A brute force ... ok test_clone (tests.TestCase_IcomIC2730A) Testing Icom IC-2730A clone ... ok test_copy_all (tests.TestCase_IcomIC2730A) Testing Icom IC-2730A copy all ... ok test_detect (tests.TestCase_IcomIC2730A) Testing Icom IC-2730A detect ... ok test_edges (tests.TestCase_IcomIC2730A) Testing Icom IC-2730A edges ... ok test_settings (tests.TestCase_IcomIC2730A) Testing Icom IC-2730A settings ... ok test_banks (tests.TestCase_AnyToneOBLTR8R) Testing AnyTone OBLTR-8R banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_AnyToneOBLTR8R) Testing AnyTone OBLTR-8R brute force ... ok test_clone (tests.TestCase_AnyToneOBLTR8R) Testing AnyTone OBLTR-8R clone ... ok test_copy_all (tests.TestCase_AnyToneOBLTR8R) Testing AnyTone OBLTR-8R copy all ... ok test_detect (tests.TestCase_AnyToneOBLTR8R) Testing AnyTone OBLTR-8R detect ... ok test_edges (tests.TestCase_AnyToneOBLTR8R) Testing AnyTone OBLTR-8R edges ... ok test_settings (tests.TestCase_AnyToneOBLTR8R) Testing AnyTone OBLTR-8R settings ... ok test_banks (tests.TestCase_WouxunKG816) Testing Wouxun KG-816 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_WouxunKG816) Testing Wouxun KG-816 brute force ... ok test_clone (tests.TestCase_WouxunKG816) Testing Wouxun KG-816 clone ... ok test_copy_all (tests.TestCase_WouxunKG816) Testing Wouxun KG-816 copy all ... ok test_detect (tests.TestCase_WouxunKG816) Testing Wouxun KG-816 detect ... ok test_edges (tests.TestCase_WouxunKG816) Testing Wouxun KG-816 edges ... ok test_settings (tests.TestCase_WouxunKG816) Testing Wouxun KG-816 settings ... ok test_banks (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 banks ... ok test_brute_force (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 brute force ... ok test_clone (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 clone ... ok test_copy_all (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 copy all ... ok test_detect (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 detect ... ok test_edges (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 edges ... ok test_settings (tests.TestCase_YaesuFT8800) Testing Yaesu FT-8800 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_IcomICQ7A) Testing Icom IC-Q7A banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_IcomICQ7A) Testing Icom IC-Q7A brute force ... ok test_clone (tests.TestCase_IcomICQ7A) Testing Icom IC-Q7A clone ... ok test_copy_all (tests.TestCase_IcomICQ7A) Testing Icom IC-Q7A copy all ... ok test_detect (tests.TestCase_IcomICQ7A) Testing Icom IC-Q7A detect ... ok test_edges (tests.TestCase_IcomICQ7A) Testing Icom IC-Q7A edges ... ok test_settings (tests.TestCase_IcomICQ7A) Testing Icom IC-Q7A settings ... ok test_banks (tests.TestCase_YaesuVX8GE) Testing Yaesu VX-8GE banks ... ok test_brute_force (tests.TestCase_YaesuVX8GE) Testing Yaesu VX-8GE brute force ... ok test_clone (tests.TestCase_YaesuVX8GE) Testing Yaesu VX-8GE clone ... ok test_copy_all (tests.TestCase_YaesuVX8GE) Testing Yaesu VX-8GE copy all ... ok test_detect (tests.TestCase_YaesuVX8GE) Testing Yaesu VX-8GE detect ... ok test_edges (tests.TestCase_YaesuVX8GE) Testing Yaesu VX-8GE edges ... ok test_settings (tests.TestCase_YaesuVX8GE) Testing Yaesu VX-8GE settings ... ok test_banks (tests.TestCase_IcomICT70) Testing Icom IC-T70 banks ... ok test_brute_force (tests.TestCase_IcomICT70) Testing Icom IC-T70 brute force ... ok test_clone (tests.TestCase_IcomICT70) Testing Icom IC-T70 clone ... ok test_copy_all (tests.TestCase_IcomICT70) Testing Icom IC-T70 copy all ... ok test_detect (tests.TestCase_IcomICT70) Testing Icom IC-T70 detect ... ok test_edges (tests.TestCase_IcomICT70) Testing Icom IC-T70 edges ... ok test_settings (tests.TestCase_IcomICT70) Testing Icom IC-T70 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_TYTTHUV3R) Testing TYT TH-UV3R banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_TYTTHUV3R) Testing TYT TH-UV3R brute force ... ok test_clone (tests.TestCase_TYTTHUV3R) Testing TYT TH-UV3R clone ... ok test_copy_all (tests.TestCase_TYTTHUV3R) Testing TYT TH-UV3R copy all ... ok test_detect (tests.TestCase_TYTTHUV3R) Testing TYT TH-UV3R detect ... ok test_edges (tests.TestCase_TYTTHUV3R) Testing TYT TH-UV3R edges ... ok test_settings (tests.TestCase_TYTTHUV3R) Testing TYT TH-UV3R settings ... skipped 'Settings not supported' test_banks (tests.TestCase_YaesuFT1D) Testing Yaesu FT-1D banks ... ok test_brute_force (tests.TestCase_YaesuFT1D) Testing Yaesu FT-1D brute force ... ok test_clone (tests.TestCase_YaesuFT1D) Testing Yaesu FT-1D clone ... ok test_copy_all (tests.TestCase_YaesuFT1D) Testing Yaesu FT-1D copy all ... ok test_detect (tests.TestCase_YaesuFT1D) Testing Yaesu FT-1D detect ... ok test_edges (tests.TestCase_YaesuFT1D) Testing Yaesu FT-1D edges ... ok test_settings (tests.TestCase_YaesuFT1D) Testing Yaesu FT-1D settings ... ok test_banks (tests.TestCase_RetevisRT23) Testing Retevis RT23 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RetevisRT23) Testing Retevis RT23 brute force ... ok test_clone (tests.TestCase_RetevisRT23) Testing Retevis RT23 clone ... ok test_copy_all (tests.TestCase_RetevisRT23) Testing Retevis RT23 copy all ... ok test_detect (tests.TestCase_RetevisRT23) Testing Retevis RT23 detect ... ok test_edges (tests.TestCase_RetevisRT23) Testing Retevis RT23 edges ... ok test_settings (tests.TestCase_RetevisRT23) Testing Retevis RT23 settings ... ok test_banks (tests.TestCase_PuxingPX777) Testing Puxing PX-777 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_PuxingPX777) Testing Puxing PX-777 brute force ... ok test_clone (tests.TestCase_PuxingPX777) Testing Puxing PX-777 clone ... ok test_copy_all (tests.TestCase_PuxingPX777) Testing Puxing PX-777 copy all ... ok test_detect (tests.TestCase_PuxingPX777) Testing Puxing PX-777 detect ... ok test_edges (tests.TestCase_PuxingPX777) Testing Puxing PX-777 edges ... ok test_settings (tests.TestCase_PuxingPX777) Testing Puxing PX-777 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_IcomID800H) Testing Icom ID-800H banks ... ok test_brute_force (tests.TestCase_IcomID800H) Testing Icom ID-800H brute force ... ok test_clone (tests.TestCase_IcomID800H) Testing Icom ID-800H clone ... ok test_copy_all (tests.TestCase_IcomID800H) Testing Icom ID-800H copy all ... ok test_detect (tests.TestCase_IcomID800H) Testing Icom ID-800H detect ... ok test_edges (tests.TestCase_IcomID800H) Testing Icom ID-800H edges ... ok test_settings (tests.TestCase_IcomID800H) Testing Icom ID-800H settings ... ok test_banks (tests.TestCase_AlincoDR235T) Testing Alinco DR235T banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_AlincoDR235T) Testing Alinco DR235T brute force ... ok test_clone (tests.TestCase_AlincoDR235T) Testing Alinco DR235T clone ... ok test_copy_all (tests.TestCase_AlincoDR235T) Testing Alinco DR235T copy all ... ok test_detect (tests.TestCase_AlincoDR235T) Testing Alinco DR235T detect ... ok test_edges (tests.TestCase_AlincoDR235T) Testing Alinco DR235T edges ... ok test_settings (tests.TestCase_AlincoDR235T) Testing Alinco DR235T settings ... skipped 'Settings not supported' test_banks (tests.TestCase_YaesuVX5) Testing Yaesu VX-5 banks ... ok test_brute_force (tests.TestCase_YaesuVX5) Testing Yaesu VX-5 brute force ... ok test_clone (tests.TestCase_YaesuVX5) Testing Yaesu VX-5 clone ... ok test_copy_all (tests.TestCase_YaesuVX5) Testing Yaesu VX-5 copy all ... ok test_detect (tests.TestCase_YaesuVX5) Testing Yaesu VX-5 detect ... ok test_edges (tests.TestCase_YaesuVX5) Testing Yaesu VX-5 edges ... ok test_settings (tests.TestCase_YaesuVX5) Testing Yaesu VX-5 settings ... skipped 'Settings not supported' test_banks (tests.TestCase_FeidaxinFD288B) Testing Feidaxin FD-288B banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_FeidaxinFD288B) Testing Feidaxin FD-288B brute force ... ok test_clone (tests.TestCase_FeidaxinFD288B) Testing Feidaxin FD-288B clone ... ok test_copy_all (tests.TestCase_FeidaxinFD288B) Testing Feidaxin FD-288B copy all ... ok test_detect (tests.TestCase_FeidaxinFD288B) Testing Feidaxin FD-288B detect ... ok test_edges (tests.TestCase_FeidaxinFD288B) Testing Feidaxin FD-288B edges ... ok test_settings (tests.TestCase_FeidaxinFD288B) Testing Feidaxin FD-288B settings ... ok test_banks (tests.TestCase_YaesuFT2900R1900R) Testing Yaesu FT-2900R/1900R banks ... ok test_brute_force (tests.TestCase_YaesuFT2900R1900R) Testing Yaesu FT-2900R/1900R brute force ... ok test_clone (tests.TestCase_YaesuFT2900R1900R) Testing Yaesu FT-2900R/1900R clone ... ok test_copy_all (tests.TestCase_YaesuFT2900R1900R) Testing Yaesu FT-2900R/1900R copy all ... ok test_detect (tests.TestCase_YaesuFT2900R1900R) Testing Yaesu FT-2900R/1900R detect ... ok test_edges (tests.TestCase_YaesuFT2900R1900R) Testing Yaesu FT-2900R/1900R edges ... ok test_settings (tests.TestCase_YaesuFT2900R1900R) Testing Yaesu FT-2900R/1900R settings ... ok test_banks (tests.TestCase_RetevisRT21) Testing Retevis RT21 banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_RetevisRT21) Testing Retevis RT21 brute force ... ok test_clone (tests.TestCase_RetevisRT21) Testing Retevis RT21 clone ... ok test_copy_all (tests.TestCase_RetevisRT21) Testing Retevis RT21 copy all ... ok test_detect (tests.TestCase_RetevisRT21) Testing Retevis RT21 detect ... ok test_edges (tests.TestCase_RetevisRT21) Testing Retevis RT21 edges ... ok test_settings (tests.TestCase_RetevisRT21) Testing Retevis RT21 settings ... ok test_banks (tests.TestCase_YaesuFT817NDUS) Testing Yaesu FT-817ND (US) banks ... skipped 'Banks not supported' test_brute_force (tests.TestCase_YaesuFT817NDUS) Testing Yaesu FT-817ND (US) brute force ... ok test_clone (tests.TestCase_YaesuFT817NDUS) Testing Yaesu FT-817ND (US) clone ... ok test_copy_all (tests.TestCase_YaesuFT817NDUS) Testing Yaesu FT-817ND (US) copy all ... ok test_detect (tests.TestCase_YaesuFT817NDUS) Testing Yaesu FT-817ND (US) detect ... ok test_edges (tests.TestCase_YaesuFT817NDUS) Testing Yaesu FT-817ND (US) edges ... ok test_settings (tests.TestCase_YaesuFT817NDUS) Testing Yaesu FT-817ND (US) settings ... ok ---------------------------------------------------------------------- Ran 763 tests in 170.846s OK (skipped=109) style inst-nodeps: /var/lib/jenkins/jobs/chirp-test/workspace/.tox/dist/chirp-0.3.0dev.zip style installed: ----------------------------------------,Error when trying to get requirement for VCS system Command "git config --get-regexp remote\..*\.url" failed with error code 1 in /danplanet/users/dan/automation/donatello_events, falling back to uneditable format,Could not determine repository location of /danplanet/users/dan/automation/donatello_events,Warning: cannot find svn location for soaplib===0.8.1dev-r0,aiohttp==0.15.2,alabaster==0.7.7,aniso8601==0.92,ansible==2.2.1.0,appdirs==1.4.0,astral==1.2,astroid==1.3.4,asyncio==3.4.1,attrs==15.2.0,Babel==1.3,backports.ssl-match-hostname==3.5.0.1,beautifulsoup4==4.4.1,carbon==0.9.15,CDDB==1.4,cffi==1.9.1,chardet==2.3.0,chirp==0.3.0.dev0,colorama==0.2.7,cryptography==1.7.2,Django==1.8.7,django-tagging==0.4,dnspython==1.12.0,docutils==0.12,## !! Could not determine repository location,Donatello==1.0,## !! Could not determine repository location,donatello-events==1.0,ecdsa==0.13,enum34==1.1.6,extras==0.0.3,eyeD3==0.7.4,fixtures==1.3.1,Flask==0.10.1,Flask-RESTful==0.3.1,gear==0.5.8,gearman==2.0.2,gevent==1.0.1,gevent-socketio==0.3.6,gevent-websocket==0.9.3,git-review==1.24,graphite-web==0.9.15,greenlet==0.4.5,gyp==0.1,hachoir-core==1.3.3,hachoir-metadata==1.3.3,hachoir-parser==1.3.4,html5lib==0.999,httplib2==0.9.1,idna==2.2,iniparse==0.4,iotop==0.6,ipaddr==2.1.11,ipaddress==1.0.18,iso8601==0.1.11,itsdangerous==0.24,Jinja2==2.8.1,junitxml==0.6,keyring==7.3,launchpadlib==1.10.3,lazr.restfulclient==0.13.4,lazr.uri==1.0.3,libvirt-python==1.3.1,linecache2==1.0.0,lockfile==0.9.1,logilab-common==0.63.2,lxml==3.5.0,M2Crypto==0.22.6rc4,MarkupSafe==0.23,mechanize==0.2.5,meld==3.14.2,mercurial==3.7.3,mock==1.0.1,mox==0.5.3,musicbrainzngs==0.5,mutagen==1.31,mysqlclient==1.3.7,ndg-httpsclient==0.4.0,netaddr==0.7.18,oauth==1.0.1,packaging==16.8,paho-mqtt==1.1,PAM==0.4.2,paramiko==2.1.1,pbr==1.8.1,pep8==1.6.2,phue==0.8,Pillow==3.1.2,pluggy==0.5.2,ply==3.10,prettytable==0.7.2,psutil==3.4.2,puredaemon==0.1.0,pushbullet.py==0.11.0,py==1.4.34,pyasn1==0.2.3,pyasn1-modules==0.0.7,pycparser==2.17,pycrypto==2.6.1,pycryptodome==3.4.5,pycurl==7.43.0,Pygments==2.1,pygobject==3.20.0,pylast==1.0.0,pyliblzma==0.5.3,pylint==1.4.1,pynoc==1.4.2,-e git+https://kk7ds:sQnEgbmw16Ox@github.com/kk7ds/pynx584.git@cad0f8a701d220876f9872fd36aa73671ccd4c0a#egg=pynx584,pyOpenSSL==0.15.1,pyparsing==2.1.10,pyrit==0.4.0,pyserial==3.0.1,pysignals==0.1.2,pysmi==0.0.7,pysnmp==4.3.4,pysqlite==2.7.0,python-apt==1.1.0b1,python-daemon==1.6,python-debian==0.1.27,python-keyczar==0.715,python-magic==0.4.6,python-mimeparse==0.1.4,python-mpd==0.3.0,python-subunit==1.1.0,pytz==2014.10,pyvera==1.0,pywemo==0.4.0,pywws==17.11.0,pyxdg==0.25,pyxmpp==1.1.2,PyYAML==3.12,requests==2.9.1,retrying==1.3.3,roman==2.0.0,rpm-python==4.12.0.1,scapy==2.3.1,SecretStorage==2.1.3,service-identity==16.0.0,setproctitle==1.1.8,simplejson==3.8.1,six==1.10.0,snmpy==1.0.0,## FIXME: could not find svn URL in dependency_links for this package:,soaplib===0.8.1dev-r0,Sphinx==1.3.6,sphinx-rtd-theme==0.1.9,SQLAlchemy==1.0.11,sqlparse==0.1.18,stevedore==1.10.0,termcolor==1.1.0,testrepository==0.0.20,testtools==1.8.1,tmdb3==0.7.2,tox==2.8.2,traceback2==1.4.0,tvdb-api==1.10,Twisted==12.0.0,twitter==1.16.0,txAMQP==0.6.2,tzlocal==1.5.1,unifi==1.2.5,unittest2==1.1.0,urlgrabber==3.9.1,urllib3==1.13.1,virtualenv==15.1.0,wadllib==1.3.2,websocket-client==0.46.0,Werkzeug==0.9.6,whisper==0.9.12,xmldiff==0.6.10,yum-metadata-parser==1.1.4,zope.interface==4.1.1 style runtests: PYTHONHASHSEED='1029488192' style runtests: commands[0] | python ./tools/cpep8.py ___________________________________ summary ____________________________________ unit: commands succeeded driver: commands succeeded style: commands succeeded congratulations :) Email was triggered for: Success Sending email for trigger: Success

1 0