September 2013 - Developers - lists.chirpmyradio.com

[chirp_devel] BF-480/666/777/888, H-777, etc. similar models
by Andrew 09 Sep '13

09 Sep '13

There seem to be quite a few differently named but identical radios. The original software for these is called BF-480, so I assume this model is also identical, at least from a programming point of view. I have an H-777 and a BF-888S and they certainly seem the same except for a few minor firmware differences. They can both be programmed by the H777/BF888 code in Chirp. So, based upon pictures and specs I've found on the internet, here's a list of radios I believe to be the same: Baofeng BF-480 Baofeng BF-666S Baofeng BF-777S Baofeng BF-888S BHD B-828 BHD B-868 Heng Shun Tong (???) H-777 Tianyi TY-100 Zastone ZT-V68 -- Andrew.

1 0

[chirp_devel] Build test results: Successful
by Build System 09 Sep '13

09 Sep '13

Tested changes: [Dan Smith <dsmith(a)danplanet.com>] [bf888] Add Baofeng BF-888 test image [Dan Smith <dsmith(a)danplanet.com>] [bf888] Enable Baofeng BF-888 driver Related to #701 [Dan Smith <dsmith(a)danplanet.com>] Fix radio browser exposing children in tree with nothing to see Right now, the radio browser will expose the elements of an array as children in the tree, but clicking on them yields nothing as arrays are exposed at the top level. This avoids adding those elements to the tree to avoid confusion. (need a bug here) [Dan Smith <dsmith(a)danplanet.com>] [bf888] Standardize cloning routines and change name This patch makes the BF888/H777 driver pass the functional tests. Most of the change is around making the clone routines return conventional error messages and the proper exceptions for errors. Also, to run the functional tests, we have to have a predictable VENDOR and MODEL for the driver. The chinese name is cool (and correct) but it's going to get in the way of testing on some systems. For now, call this driver the Baofeng BF-888. Later, if we can figure out how to differentiate files for them, we can have a subclass for the H777. Related to #701 [Dan Smith <dsmith(a)danplanet.com>] [bf888] Finish BCL and BS flags and fix other inverted ones This adds Busy Channel Lockout and Beat Shift per-memory settings. The power, mode, and skip flags were also inverted, so this fixes that as well as punts on further decoding memory data if we determine that it is empty. Related to #701 [Dan Smith <dsmith(a)danplanet.com>] [bf888] Finish tone encoding and decoding This finishes Tone and DTCS encode/decode, as well as adds support for all the Cross variations. Related to #701 [Dan Smith <dsmith(a)danplanet.com>] [bf888] Fix get_raw_memory() index This makes the get_raw_memory() function properly return the n-1'th memory. Related to #701 [Dan Smith <dsmith(a)danplanet.com>] [bf888] Fix loading existing files This adds the process_mmap() function so that the driver will properly load existing files from disk. Related to #701 [Dan Smith <dsmith(a)danplanet.com>] [bf888] Clean up clone routines This avoids counting the blocks and otherwise streamlines the clone upload and download routines. Related to #701 Full log: Started by an SCM change Building in workspace /var/lib/jenkins/jobs/chirp-test/workspace [workspace] $ hg showconfig paths.default [workspace] $ hg pull --rev default [workspace] $ hg update --clean --rev default 3 files updated, 0 files merged, 0 files removed, 0 files unresolved [workspace] $ hg log --rev . --template {node} [workspace] $ hg log --rev . --template {rev} [workspace] $ hg log --rev 2fdf058355458deb31f1fcb711437ee71dd24ba1 [workspace] $ hg log --template "<changeset node='{node}' author='{author|xmlescape}' rev='{rev}' date='{date}'><msg>{desc|xmlescape}</msg><added>{file_adds|stringify|xmlescape}</added><deleted>{file_dels|stringify|xmlescape}</deleted><files>{files|stringify|xmlescape}</files><parents>{parents}</parents></changeset>\n" --rev default:0 --follow --prune 2fdf058355458deb31f1fcb711437ee71dd24ba1 No emails were triggered. [workspace] $ /bin/sh -xe /tmp/hudson9157330093167036600.sh + cd tests + ./run_tests Registered Icom_IC-2820H = IC2820Radio Registered AnyTone_5888UV = AnyTone5888UVRadio Registered Icom_IC-2200H = IC2200Radio Registered Yaesu_FT-2800M = FT2800Radio Registered Yaesu_VX-3 = VX3Radio Registered Icom_IC-2100H = IC2100Radio Registered Yaesu_FTM-350 = FTM350Radio Registered Icom_IC-91_92AD_ICF_File = IC9xICFRadio Registered Icom_IC-V82_U82 = ICx8xRadio Registered Yaesu_VX-6 = VX6Radio Registered Yaesu_VX-5 = VX5Radio Registered Yaesu_FT-60 = FT60Radio Registered Yaesu_VX-7 = VX7Radio Registered Baofeng_UV-5R = BaofengUV5R Registered Baofeng_F-11 = BaofengF11Radio Registered Baofeng_UV-82 = BaofengUV82Radio Registered Yaesu_FT-1802M = FT1802Radio Registered Kenwood_TK-7102 = KenwoodTK7102Radio Registered Kenwood_TK-8102 = KenwoodTK8102Radio Registered Kenwood_TK-7108 = KenwoodTK7108Radio Registered Kenwood_TK-8108 = KenwoodTK8108Radio Registered Icom_ID-31A = ID31Radio Registered Icom_ID-51A = ID51Radio Registered Icom_IC-2720H = IC2720Radio Registered Icom_IC-T8A = ICT8ARadio Registered Wouxun_KG-UVD1P = KGUVD1PRadio Registered Wouxun_KG-UV6 = KGUV6DRadio Registered Wouxun_KG-816 = KG816Radio Registered Wouxun_KG-818 = KG818Radio Registered TYT_TH-UVF1 = TYTTHUVF1Radio Registered Yaesu_FT-90 = FT90Radio Registered Generic_CSV = CSVRadio Registered RT_Systems_CSV = RTCSVRadio Registered Kenwood_ITM = ITMRadio Registered Alinco_DR03T = DR03Radio Registered Alinco_DR06T = DR06Radio Registered Alinco_DR135T = DR135Radio Registered Alinco_DR235T = DR235Radio Registered Alinco_DR435T = DR435Radio Registered Alinco_DJ596 = DJ596Radio Registered Jetstream_JT220M = JT220MRadio Registered Alinco_DJ175 = DJ175Radio Registered Kenwood_TH-D7 = THD7Radio Registered Kenwood_TH-D7G = THD7GRadio Registered Kenwood_TM-D700 = TMD700Radio Registered Kenwood_TM-V7 = TMV7Radio Registered Kenwood_TM-G707 = TMG707Radio Registered Kenwood_TH-G71 = THG71Radio Registered Kenwood_TH-F6 = THF6ARadio Registered Kenwood_TH-F7 = THF7ERadio Registered Kenwood_TM-D710 = TMD710Radio Registered Kenwood_TH-D72_live_mode = THD72Radio Registered Kenwood_TM-V71 = TMV71Radio Registered Kenwood_TH-K2 = THK2Radio Registered Kenwood_TM-271 = TM271Radio Registered Kenwood_TM-471 = TM471Radio Registered Yaesu_VX-8_R = VX8Radio Registered Yaesu_VX-8_DR = VX8DRadio Registered Yaesu_VX-8_GE = VX8GERadio Registered Icom_IC-T7H = ICT7HRadio Registered Icom_IC-Q7A = ICQ7Radio Registered Baofeng_UV-B5 = BaofengUVB5 Registered Generic_XML = XMLRadio Registered Kenwood_HMK = HMKRadio Registered Kenwood_TH-D72_clone_mode = THD72Radio Registered Icom_IC-91_92AD = IC9xRadio Registered Icom_IC-T70 = ICT70Radio Registered Icom_IC-208H = IC208Radio Registered Icom_ID-800H_v2 = ID800v2Radio Registered Icom_7200 = Icom7200Radio Registered Icom_7000 = Icom7000Radio Registered Icom_746 = Icom746Radio Registered ARRL_Travel_Plus = TpeRadio Registered Vertex_Standard_VXA-700 = VXA700Radio Registered Icom_IC-W32A = ICW32ARadio Registered Baofeng_UV-3R = UV3RRadio Registered Yaesu_VX-2 = VX2Radio Registered Puxing_PX-777 = Puxing777Radio Registered Puxing_PX-2R = Puxing2RRadio Registered Baofeng_BF-888 = H777Radio Registered Yaesu_FT-7800 = FT7800Radio Registered Yaesu_FT-8800 = FT8800Radio Registered Yaesu_FT-8900 = FT8900Radio Registered Yaesu_FT-817 = FT817Radio Registered Yaesu_FT-817ND = FT817NDRadio Registered Yaesu_FT-817ND_US = FT817NDUSRadio Registered Yaesu_FT-857_897 = FT857Radio Registered Yaesu_FT-857_897_US = FT857USRadio Registered Icom_ID-880H = ID880Radio Registered Icom_ID-80H = ID80Radio Registered TYT_TH-UV3R = TYTUV3RRadio Alinco DJ175 Detect PASSED: All tests Alinco DJ175 CopyAll PASSED: All tests Alinco DJ175 Clone PASSED: All tests Alinco DJ175 BruteForce PASSED: All tests Alinco DJ175 Edges PASSED: All tests Alinco DJ175 Banks SKIPPED: Banks not supported Alinco DJ596 Detect PASSED: All tests Alinco DJ596 CopyAll PASSED: All tests Alinco DJ596 Clone PASSED: All tests Alinco DJ596 BruteForce PASSED: All tests Alinco DJ596 Edges PASSED: All tests Alinco DJ596 Banks SKIPPED: Banks not supported Alinco DR235T Detect PASSED: All tests Alinco DR235T CopyAll PASSED: All tests Alinco DR235T Clone PASSED: All tests Alinco DR235T BruteForce PASSED: All tests Alinco DR235T Edges PASSED: All tests Alinco DR235T Banks SKIPPED: Banks not supported Baofeng BF-888 Detect PASSED: All tests Baofeng BF-888 CopyAll PASSED: All tests Baofeng BF-888 Clone PASSED: All tests Baofeng BF-888 BruteForce PASSED: All tests Baofeng BF-888 Edges PASSED: All tests Baofeng BF-888 Banks SKIPPED: Banks not supported Baofeng F-11 Detect PASSED: All tests Baofeng F-11 CopyAll PASSED: All tests Baofeng F-11 Clone PASSED: All tests Baofeng F-11 BruteForce PASSED: All tests Baofeng F-11 Edges PASSED: All tests Baofeng F-11 Banks SKIPPED: Banks not supported Baofeng UV-3R Detect PASSED: All tests Baofeng UV-3R CopyAll PASSED: All tests Baofeng UV-3R Clone PASSED: All tests Baofeng UV-3R BruteForce PASSED: All tests Baofeng UV-3R Edges PASSED: All tests Baofeng UV-3R Banks SKIPPED: Banks not supported Baofeng UV-5R Detect PASSED: All tests Baofeng UV-5R CopyAll PASSED: All tests Baofeng UV-5R Clone PASSED: All tests Baofeng UV-5R BruteForce PASSED: All tests Baofeng UV-5R Edges PASSED: All tests Baofeng UV-5R Banks SKIPPED: Banks not supported Baofeng UV-B5 Detect PASSED: All tests Baofeng UV-B5 CopyAll PASSED: All tests Baofeng UV-B5 Clone PASSED: All tests Baofeng UV-B5 BruteForce PASSED: All tests Baofeng UV-B5 Edges PASSED: All tests Baofeng UV-B5 Banks SKIPPED: Banks not supported Icom IC-208H Detect PASSED: All tests Icom IC-208H CopyAll PASSED: All tests Icom IC-208H Clone PASSED: All tests Icom IC-208H BruteForce PASSED: All tests Icom IC-208H Edges PASSED: All tests Icom IC-208H Banks PASSED: All tests Icom IC-2100H Detect PASSED: All tests Icom IC-2100H CopyAll PASSED: All tests Icom IC-2100H Clone PASSED: All tests Icom IC-2100H BruteForce PASSED: All tests Icom IC-2100H Edges PASSED: All tests Icom IC-2100H Banks SKIPPED: Banks not supported Icom IC-2200H Detect PASSED: All tests Icom IC-2200H CopyAll PASSED: All tests Icom IC-2200H Clone PASSED: All tests Icom IC-2200H BruteForce PASSED: All tests Icom IC-2200H Edges PASSED: All tests Icom IC-2200H Banks PASSED: All tests Icom IC-2720H Detect PASSED: All tests Icom IC-2720H CopyAll PASSED: All tests Icom IC-2720H Clone PASSED: All tests Icom IC-2720H BruteForce PASSED: All tests Icom IC-2720H Edges PASSED: All tests Icom IC-2720H Banks PASSED: All tests Icom IC-2820H Detect PASSED: All tests Icom IC-2820H CopyAll PASSED: All tests Icom IC-2820H Clone PASSED: All tests Icom IC-2820H BruteForce PASSED: All tests Icom IC-2820H Edges PASSED: All tests Icom IC-2820H Banks PASSED: All tests Icom IC-Q7A Detect PASSED: All tests Icom IC-Q7A CopyAll PASSED: All tests Icom IC-Q7A Clone PASSED: All tests Icom IC-Q7A BruteForce PASSED: All tests Icom IC-Q7A Edges PASSED: All tests Icom IC-Q7A Banks SKIPPED: Banks not supported Icom IC-T70 Detect PASSED: All tests Icom IC-T70 CopyAll PASSED: All tests Icom IC-T70 Clone PASSED: All tests Icom IC-T70 BruteForce PASSED: All tests Icom IC-T70 Edges PASSED: All tests Icom IC-T70 Banks PASSED: All tests Icom IC-T7H Detect PASSED: All tests Icom IC-T7H CopyAll PASSED: All tests Icom IC-T7H Clone PASSED: All tests Icom IC-T7H BruteForce PASSED: All tests Icom IC-T7H Edges PASSED: All tests Icom IC-T7H Banks SKIPPED: Banks not supported Icom IC-T8A Detect PASSED: All tests Icom IC-T8A CopyAll PASSED: All tests Icom IC-T8A Clone PASSED: All tests Icom IC-T8A BruteForce PASSED: All tests Icom IC-T8A Edges PASSED: All tests Icom IC-T8A Banks SKIPPED: Banks not supported Icom IC-V82/U82 Detect PASSED: All tests Icom IC-V82/U82 CopyAll PASSED: All tests Icom IC-V82/U82 Clone PASSED: All tests Icom IC-V82/U82 BruteForce PASSED: All tests Icom IC-V82/U82 Edges PASSED: All tests Icom IC-V82/U82 Banks PASSED: All tests Icom IC-W32A VHF Detect PASSED: All tests Icom IC-W32A VHF CopyAll PASSED: All tests Icom IC-W32A VHF Clone PASSED: All tests Icom IC-W32A VHF BruteForce PASSED: All tests Icom IC-W32A VHF Edges PASSED: All tests Icom IC-W32A VHF Banks SKIPPED: Banks not supported Icom IC-W32A UHF Detect PASSED: All tests Icom IC-W32A UHF CopyAll PASSED: All tests Icom IC-W32A UHF Clone PASSED: All tests Icom IC-W32A UHF BruteForce PASSED: All tests Icom IC-W32A UHF Edges PASSED: All tests Icom IC-W32A UHF Banks SKIPPED: Banks not supported Icom ID-31A Detect PASSED: All tests Icom ID-31A CopyAll PASSED: All tests Icom ID-31A Clone PASSED: All tests Icom ID-31A BruteForce PASSED: All tests Icom ID-31A Edges PASSED: All tests Icom ID-31A Banks PASSED: All tests Icom ID-51A Detect PASSED: All tests Icom ID-51A CopyAll PASSED: All tests Icom ID-51A Clone PASSED: All tests Icom ID-51A BruteForce PASSED: All tests Icom ID-51A Edges PASSED: All tests Icom ID-51A Banks PASSED: All tests Icom ID-800H v2 Detect PASSED: All tests Icom ID-800H v2 CopyAll PASSED: All tests Icom ID-800H v2 Clone PASSED: All tests Icom ID-800H v2 BruteForce PASSED: All tests Icom ID-800H v2 Edges PASSED: All tests Icom ID-800H v2 Banks PASSED: All tests Icom ID-880H Detect PASSED: All tests Icom ID-880H CopyAll PASSED: All tests Icom ID-880H Clone PASSED: All tests Icom ID-880H BruteForce PASSED: All tests Icom ID-880H Edges PASSED: All tests Icom ID-880H Banks PASSED: All tests Jetstream JT220M Detect PASSED: All tests Jetstream JT220M CopyAll PASSED: All tests Jetstream JT220M Clone PASSED: All tests Jetstream JT220M BruteForce PASSED: All tests Jetstream JT220M Edges PASSED: All tests Jetstream JT220M Banks SKIPPED: Banks not supported Kenwood TH-D72 (clone Detect PASSED: All tests Kenwood TH-D72 (clone CopyAll PASSED: All tests Kenwood TH-D72 (clone Clone PASSED: All tests Kenwood TH-D72 (clone BruteForce PASSED: All tests Kenwood TH-D72 (clone Edges PASSED: All tests Kenwood TH-D72 (clone Banks SKIPPED: Banks not supported Kenwood TK-8102 Detect PASSED: All tests Kenwood TK-8102 CopyAll PASSED: All tests Kenwood TK-8102 Clone PASSED: All tests Kenwood TK-8102 BruteForce PASSED: All tests Kenwood TK-8102 Edges PASSED: All tests Kenwood TK-8102 Banks SKIPPED: Banks not supported Puxing PX-2R Detect PASSED: All tests Puxing PX-2R CopyAll PASSED: All tests Puxing PX-2R Clone PASSED: All tests Puxing PX-2R BruteForce PASSED: All tests Puxing PX-2R Edges PASSED: All tests Puxing PX-2R Banks SKIPPED: Banks not supported Puxing PX-777 Detect PASSED: All tests Puxing PX-777 CopyAll PASSED: All tests Puxing PX-777 Clone PASSED: All tests Puxing PX-777 BruteForce PASSED: All tests Puxing PX-777 Edges PASSED: All tests Puxing PX-777 Banks SKIPPED: Banks not supported TYT TH-UV3R Detect PASSED: All tests TYT TH-UV3R CopyAll PASSED: All tests TYT TH-UV3R Clone PASSED: All tests TYT TH-UV3R BruteForce PASSED: All tests TYT TH-UV3R Edges PASSED: All tests TYT TH-UV3R Banks SKIPPED: Banks not supported TYT TH-UVF1 Detect PASSED: All tests TYT TH-UVF1 CopyAll PASSED: All tests TYT TH-UVF1 Clone PASSED: All tests TYT TH-UVF1 BruteForce PASSED: All tests TYT TH-UVF1 Edges PASSED: All tests TYT TH-UVF1 Banks SKIPPED: Banks not supported Vertex VXA-700 Detect PASSED: All tests Vertex VXA-700 CopyAll PASSED: All tests Vertex VXA-700 Clone PASSED: All tests Vertex VXA-700 BruteForce PASSED: All tests Vertex VXA-700 Edges PASSED: All tests Vertex VXA-700 Banks SKIPPED: Banks not supported Wouxun KG-816 Detect PASSED: All tests Wouxun KG-816 CopyAll PASSED: All tests Wouxun KG-816 Clone PASSED: All tests Wouxun KG-816 BruteForce PASSED: All tests Wouxun KG-816 Edges PASSED: All tests Wouxun KG-816 Banks SKIPPED: Banks not supported Wouxun KG-818 Detect PASSED: All tests Wouxun KG-818 CopyAll PASSED: All tests Wouxun KG-818 Clone PASSED: All tests Wouxun KG-818 BruteForce PASSED: All tests Wouxun KG-818 Edges PASSED: All tests Wouxun KG-818 Banks SKIPPED: Banks not supported Wouxun KG-UV6 Detect PASSED: All tests Wouxun KG-UV6 CopyAll PASSED: All tests Wouxun KG-UV6 Clone PASSED: All tests Wouxun KG-UV6 BruteForce PASSED: All tests Wouxun KG-UV6 Edges PASSED: All tests Wouxun KG-UV6 Banks SKIPPED: Banks not supported Wouxun KG-UVD1P Detect PASSED: All tests Wouxun KG-UVD1P CopyAll PASSED: All tests Wouxun KG-UVD1P Clone PASSED: All tests Wouxun KG-UVD1P BruteForce PASSED: All tests Wouxun KG-UVD1P Edges PASSED: All tests Wouxun KG-UVD1P Banks SKIPPED: Banks not supported Yaesu FT-1802M Detect PASSED: All tests Yaesu FT-1802M CopyAll PASSED: All tests Yaesu FT-1802M Clone PASSED: All tests Yaesu FT-1802M BruteForce PASSED: All tests Yaesu FT-1802M Edges PASSED: All tests Yaesu FT-1802M Banks SKIPPED: Banks not supported Yaesu FT-2800M Detect PASSED: All tests Yaesu FT-2800M CopyAll PASSED: All tests Yaesu FT-2800M Clone PASSED: All tests Yaesu FT-2800M BruteForce PASSED: All tests Yaesu FT-2800M Edges PASSED: All tests Yaesu FT-2800M Banks SKIPPED: Banks not supported Yaesu FT-60 Detect PASSED: All tests Yaesu FT-60 CopyAll PASSED: All tests Yaesu FT-60 Clone PASSED: All tests Yaesu FT-60 BruteForce PASSED: All tests Yaesu FT-60 Edges PASSED: All tests Yaesu FT-60 Banks SKIPPED: Banks not supported Yaesu FT-7800 Detect PASSED: All tests Yaesu FT-7800 CopyAll PASSED: All tests Yaesu FT-7800 Clone PASSED: All tests Yaesu FT-7800 BruteForce PASSED: All tests Yaesu FT-7800 Edges PASSED: All tests Yaesu FT-7800 Banks PASSED: All tests Yaesu FT-817 Detect PASSED: All tests Yaesu FT-817 CopyAll PASSED: All tests Yaesu FT-817 Clone PASSED: All tests Yaesu FT-817 BruteForce PASSED: All tests Yaesu FT-817 Edges PASSED: All tests Yaesu FT-817 Banks SKIPPED: Banks not supported Yaesu FT-817ND Detect PASSED: All tests Yaesu FT-817ND CopyAll PASSED: All tests Yaesu FT-817ND Clone PASSED: All tests Yaesu FT-817ND BruteForce PASSED: All tests Yaesu FT-817ND Edges PASSED: All tests Yaesu FT-817ND Banks SKIPPED: Banks not supported Yaesu FT-817ND (US) Detect PASSED: All tests Yaesu FT-817ND (US) CopyAll PASSED: All tests Yaesu FT-817ND (US) Clone PASSED: All tests Yaesu FT-817ND (US) BruteForce PASSED: All tests Yaesu FT-817ND (US) Edges PASSED: All tests Yaesu FT-817ND (US) Banks SKIPPED: Banks not supported Yaesu FT-857/897 Detect PASSED: All tests Yaesu FT-857/897 CopyAll PASSED: All tests Yaesu FT-857/897 Clone PASSED: All tests Yaesu FT-857/897 BruteForce PASSED: All tests Yaesu FT-857/897 Edges PASSED: All tests Yaesu FT-857/897 Banks SKIPPED: Banks not supported Yaesu FT-857/897 (U Detect PASSED: All tests Yaesu FT-857/897 (U CopyAll PASSED: All tests Yaesu FT-857/897 (U Clone PASSED: All tests Yaesu FT-857/897 (U BruteForce PASSED: All tests Yaesu FT-857/897 (U Edges PASSED: All tests Yaesu FT-857/897 (U Banks SKIPPED: Banks not supported Yaesu FT-8800 Left Detect PASSED: All tests Yaesu FT-8800 Left CopyAll PASSED: All tests Yaesu FT-8800 Left Clone PASSED: All tests Yaesu FT-8800 Left BruteForce PASSED: All tests Yaesu FT-8800 Left Edges PASSED: All tests Yaesu FT-8800 Left Banks PASSED: All tests Yaesu FT-8800 Right Detect PASSED: All tests Yaesu FT-8800 Right CopyAll PASSED: All tests Yaesu FT-8800 Right Clone PASSED: All tests Yaesu FT-8800 Right BruteForce PASSED: All tests Yaesu FT-8800 Right Edges PASSED: All tests Yaesu FT-8800 Right Banks PASSED: All tests Yaesu FT-8900 Detect PASSED: All tests Yaesu FT-8900 CopyAll PASSED: All tests Yaesu FT-8900 Clone PASSED: All tests Yaesu FT-8900 BruteForce PASSED: All tests Yaesu FT-8900 Edges PASSED: All tests Yaesu FT-8900 Banks SKIPPED: Banks not supported Yaesu FTM-350 Left Detect PASSED: All tests Yaesu FTM-350 Left CopyAll PASSED: All tests Yaesu FTM-350 Left Clone PASSED: All tests Yaesu FTM-350 Left BruteForce PASSED: All tests Yaesu FTM-350 Left Edges PASSED: All tests Yaesu FTM-350 Left Banks SKIPPED: Banks not supported Yaesu FTM-350 Right Detect PASSED: All tests Yaesu FTM-350 Right CopyAll PASSED: All tests Yaesu FTM-350 Right Clone PASSED: All tests Yaesu FTM-350 Right BruteForce PASSED: All tests Yaesu FTM-350 Right Edges PASSED: All tests Yaesu FTM-350 Right Banks SKIPPED: Banks not supported Yaesu VX-3 Detect PASSED: All tests Yaesu VX-3 CopyAll PASSED: All tests Yaesu VX-3 Clone PASSED: All tests Yaesu VX-3 BruteForce PASSED: All tests Yaesu VX-3 Edges PASSED: All tests Yaesu VX-3 Banks SKIPPED: Banks not supported Yaesu VX-5 Detect PASSED: All tests Yaesu VX-5 CopyAll PASSED: All tests Yaesu VX-5 Clone PASSED: All tests Yaesu VX-5 BruteForce PASSED: All tests Yaesu VX-5 Edges PASSED: All tests Yaesu VX-5 Banks PASSED: All tests Yaesu VX-6 Detect PASSED: All tests Yaesu VX-6 CopyAll PASSED: All tests Yaesu VX-6 Clone PASSED: All tests Yaesu VX-6 BruteForce PASSED: All tests Yaesu VX-6 Edges PASSED: All tests Yaesu VX-6 Banks SKIPPED: Banks not supported Yaesu VX-7 Detect PASSED: All tests Yaesu VX-7 CopyAll PASSED: All tests Yaesu VX-7 Clone PASSED: All tests Yaesu VX-7 BruteForce PASSED: All tests Yaesu VX-7 Edges PASSED: All tests Yaesu VX-7 Banks PASSED: All tests Yaesu VX-8 R Detect PASSED: All tests Yaesu VX-8 R CopyAll PASSED: All tests Yaesu VX-8 R Clone PASSED: All tests Yaesu VX-8 R BruteForce PASSED: All tests Yaesu VX-8 R Edges PASSED: All tests Yaesu VX-8 R Banks PASSED: All tests ---------------------------------------------------------------------- Results: TOTAL : 330 FAILED : 0 SKIPPED: 39 PASSED : 291 CRASHED: 0 [workspace] $ /bin/sh -xe /tmp/hudson8518803227261204133.sh + nosetests -v tests/unit test_bit_array (tests.unit.test_bitwise.TestBitType) ... ok test_bit_array_fail (tests.unit.test_bitwise.TestBitType) ... ok test_bitfield_u16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_u24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_u8 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_ul16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_ul24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_bbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_lbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_lbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_type_u16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u8 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_char (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string_wrong_length (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_missing_semicolon (tests.unit.test_bitwise.TestBitwiseErrors) ... ok test_seek (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_seekto (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_struct_one_element (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_two_elements (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_writes (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok split_tone_encode_test_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_none (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_none (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_fix_rounded_step_250 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_500 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_750 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_12_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_2_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_5_0 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_6_25 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_fractional_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step_fail (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_format_freq (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_bad (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_decimal (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whitespace (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whole (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_ensure_has_calls_almost_full (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_empty (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_partial (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full1 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full2 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_urcall_full (tests.unit.test_import_logic.DstarTests) ... ok test_import_bank (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffA_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffB_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_negative (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_too_big_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_uhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_errors (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_warnings (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_invalid (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_am (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_fm (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_name (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_closest (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_dst (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_src (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_same (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffA_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffB_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModelIndexInterface) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_icom_bank (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_index_bounds (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_next_mapping_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_auto_tone_mode_cross (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_pol (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_rx (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tone (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tsql (tests.unit.test_memedit_edits.TestEdits) ... ok test_init (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_bad_portnames (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_sorted (tests.unit.test_platform.Win32PlatformTest) ... ok test_apply_callback (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_group (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_multi (tests.unit.test_settings.TestSettingContainers) ... ok test_changed (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_boolean (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_float (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_integer (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_list (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_string (tests.unit.test_settings.TestSettingValues) ... ok test_validate_callback (tests.unit.test_settings.TestSettingValues) ... ok test_delete_hole_with_all (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_all_full (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_without_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_with_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_without_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok ---------------------------------------------------------------------- Ran 147 tests in 0.056s OK Email was triggered for: Success Sending email for trigger: Success

1 0

[chirp_devel] Build test results: Successful
by Build System 09 Sep '13

09 Sep '13

Tested changes: [Marco Filippi <iz3gme.marco(a)gmail.com>] [kg-uv6] Fix fm preset locations and numbers Fix #1115 Full log: Started by an SCM change Building in workspace /var/lib/jenkins/jobs/chirp-test/workspace [workspace] $ hg showconfig paths.default [workspace] $ hg pull --rev default [workspace] $ hg update --clean --rev default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved [workspace] $ hg log --rev . --template {node} [workspace] $ hg log --rev . --template {rev} [workspace] $ hg log --rev b5cced8e6c9da6d5ed82200cd62021fca74e926e [workspace] $ hg log --template "<changeset node='{node}' author='{author|xmlescape}' rev='{rev}' date='{date}'><msg>{desc|xmlescape}</msg><added>{file_adds|stringify|xmlescape}</added><deleted>{file_dels|stringify|xmlescape}</deleted><files>{files|stringify|xmlescape}</files><parents>{parents}</parents></changeset>\n" --rev default:0 --follow --prune b5cced8e6c9da6d5ed82200cd62021fca74e926e No emails were triggered. [workspace] $ /bin/sh -xe /tmp/hudson5009670163674715348.sh + cd tests + ./run_tests Registered Icom_IC-2820H = IC2820Radio Registered AnyTone_5888UV = AnyTone5888UVRadio Registered Icom_IC-2200H = IC2200Radio Registered Yaesu_FT-2800M = FT2800Radio Registered Yaesu_VX-3 = VX3Radio Registered Icom_IC-2100H = IC2100Radio Registered Yaesu_FTM-350 = FTM350Radio Registered Icom_IC-91_92AD_ICF_File = IC9xICFRadio Registered Icom_IC-V82_U82 = ICx8xRadio Registered Yaesu_VX-6 = VX6Radio Registered Yaesu_VX-5 = VX5Radio Registered Yaesu_FT-60 = FT60Radio Registered Yaesu_VX-7 = VX7Radio Registered Baofeng_UV-5R = BaofengUV5R Registered Baofeng_F-11 = BaofengF11Radio Registered Baofeng_UV-82 = BaofengUV82Radio Registered Yaesu_FT-1802M = FT1802Radio Registered Kenwood_TK-7102 = KenwoodTK7102Radio Registered Kenwood_TK-8102 = KenwoodTK8102Radio Registered Kenwood_TK-7108 = KenwoodTK7108Radio Registered Kenwood_TK-8108 = KenwoodTK8108Radio Registered Icom_ID-31A = ID31Radio Registered Icom_ID-51A = ID51Radio Registered Icom_IC-2720H = IC2720Radio Registered Icom_IC-T8A = ICT8ARadio Registered Wouxun_KG-UVD1P = KGUVD1PRadio Registered Wouxun_KG-UV6 = KGUV6DRadio Registered Wouxun_KG-816 = KG816Radio Registered Wouxun_KG-818 = KG818Radio Registered TYT_TH-UVF1 = TYTTHUVF1Radio Registered Yaesu_FT-90 = FT90Radio Registered Generic_CSV = CSVRadio Registered RT_Systems_CSV = RTCSVRadio Registered Kenwood_ITM = ITMRadio Registered Alinco_DR03T = DR03Radio Registered Alinco_DR06T = DR06Radio Registered Alinco_DR135T = DR135Radio Registered Alinco_DR235T = DR235Radio Registered Alinco_DR435T = DR435Radio Registered Alinco_DJ596 = DJ596Radio Registered Jetstream_JT220M = JT220MRadio Registered Alinco_DJ175 = DJ175Radio Registered Kenwood_TH-D7 = THD7Radio Registered Kenwood_TH-D7G = THD7GRadio Registered Kenwood_TM-D700 = TMD700Radio Registered Kenwood_TM-V7 = TMV7Radio Registered Kenwood_TM-G707 = TMG707Radio Registered Kenwood_TH-G71 = THG71Radio Registered Kenwood_TH-F6 = THF6ARadio Registered Kenwood_TH-F7 = THF7ERadio Registered Kenwood_TM-D710 = TMD710Radio Registered Kenwood_TH-D72_live_mode = THD72Radio Registered Kenwood_TM-V71 = TMV71Radio Registered Kenwood_TH-K2 = THK2Radio Registered Kenwood_TM-271 = TM271Radio Registered Kenwood_TM-471 = TM471Radio Registered Yaesu_VX-8_R = VX8Radio Registered Yaesu_VX-8_DR = VX8DRadio Registered Yaesu_VX-8_GE = VX8GERadio Registered Icom_IC-T7H = ICT7HRadio Registered Icom_IC-Q7A = ICQ7Radio Registered Baofeng_UV-B5 = BaofengUVB5 Registered Generic_XML = XMLRadio Registered Kenwood_HMK = HMKRadio Registered Kenwood_TH-D72_clone_mode = THD72Radio Registered Icom_IC-91_92AD = IC9xRadio Registered Icom_IC-T70 = ICT70Radio Registered Icom_IC-208H = IC208Radio Registered Icom_ID-800H_v2 = ID800v2Radio Registered Icom_7200 = Icom7200Radio Registered Icom_7000 = Icom7000Radio Registered Icom_746 = Icom746Radio Registered ARRL_Travel_Plus = TpeRadio Registered Vertex_Standard_VXA-700 = VXA700Radio Registered Icom_IC-W32A = ICW32ARadio Registered Baofeng_UV-3R = UV3RRadio Registered Yaesu_VX-2 = VX2Radio Registered Puxing_PX-777 = Puxing777Radio Registered Puxing_PX-2R = Puxing2RRadio Registered Yaesu_FT-7800 = FT7800Radio Registered Yaesu_FT-8800 = FT8800Radio Registered Yaesu_FT-8900 = FT8900Radio Registered Yaesu_FT-817 = FT817Radio Registered Yaesu_FT-817ND = FT817NDRadio Registered Yaesu_FT-817ND_US = FT817NDUSRadio Registered Yaesu_FT-857_897 = FT857Radio Registered Yaesu_FT-857_897_US = FT857USRadio Registered Icom_ID-880H = ID880Radio Registered Icom_ID-80H = ID80Radio Registered TYT_TH-UV3R = TYTUV3RRadio Alinco DJ175 Detect PASSED: All tests Alinco DJ175 CopyAll PASSED: All tests Alinco DJ175 Clone PASSED: All tests Alinco DJ175 BruteForce PASSED: All tests Alinco DJ175 Edges PASSED: All tests Alinco DJ175 Banks SKIPPED: Banks not supported Alinco DJ596 Detect PASSED: All tests Alinco DJ596 CopyAll PASSED: All tests Alinco DJ596 Clone PASSED: All tests Alinco DJ596 BruteForce PASSED: All tests Alinco DJ596 Edges PASSED: All tests Alinco DJ596 Banks SKIPPED: Banks not supported Alinco DR235T Detect PASSED: All tests Alinco DR235T CopyAll PASSED: All tests Alinco DR235T Clone PASSED: All tests Alinco DR235T BruteForce PASSED: All tests Alinco DR235T Edges PASSED: All tests Alinco DR235T Banks SKIPPED: Banks not supported Baofeng F-11 Detect PASSED: All tests Baofeng F-11 CopyAll PASSED: All tests Baofeng F-11 Clone PASSED: All tests Baofeng F-11 BruteForce PASSED: All tests Baofeng F-11 Edges PASSED: All tests Baofeng F-11 Banks SKIPPED: Banks not supported Baofeng UV-3R Detect PASSED: All tests Baofeng UV-3R CopyAll PASSED: All tests Baofeng UV-3R Clone PASSED: All tests Baofeng UV-3R BruteForce PASSED: All tests Baofeng UV-3R Edges PASSED: All tests Baofeng UV-3R Banks SKIPPED: Banks not supported Baofeng UV-5R Detect PASSED: All tests Baofeng UV-5R CopyAll PASSED: All tests Baofeng UV-5R Clone PASSED: All tests Baofeng UV-5R BruteForce PASSED: All tests Baofeng UV-5R Edges PASSED: All tests Baofeng UV-5R Banks SKIPPED: Banks not supported Baofeng UV-B5 Detect PASSED: All tests Baofeng UV-B5 CopyAll PASSED: All tests Baofeng UV-B5 Clone PASSED: All tests Baofeng UV-B5 BruteForce PASSED: All tests Baofeng UV-B5 Edges PASSED: All tests Baofeng UV-B5 Banks SKIPPED: Banks not supported Icom IC-208H Detect PASSED: All tests Icom IC-208H CopyAll PASSED: All tests Icom IC-208H Clone PASSED: All tests Icom IC-208H BruteForce PASSED: All tests Icom IC-208H Edges PASSED: All tests Icom IC-208H Banks PASSED: All tests Icom IC-2100H Detect PASSED: All tests Icom IC-2100H CopyAll PASSED: All tests Icom IC-2100H Clone PASSED: All tests Icom IC-2100H BruteForce PASSED: All tests Icom IC-2100H Edges PASSED: All tests Icom IC-2100H Banks SKIPPED: Banks not supported Icom IC-2200H Detect PASSED: All tests Icom IC-2200H CopyAll PASSED: All tests Icom IC-2200H Clone PASSED: All tests Icom IC-2200H BruteForce PASSED: All tests Icom IC-2200H Edges PASSED: All tests Icom IC-2200H Banks PASSED: All tests Icom IC-2720H Detect PASSED: All tests Icom IC-2720H CopyAll PASSED: All tests Icom IC-2720H Clone PASSED: All tests Icom IC-2720H BruteForce PASSED: All tests Icom IC-2720H Edges PASSED: All tests Icom IC-2720H Banks PASSED: All tests Icom IC-2820H Detect PASSED: All tests Icom IC-2820H CopyAll PASSED: All tests Icom IC-2820H Clone PASSED: All tests Icom IC-2820H BruteForce PASSED: All tests Icom IC-2820H Edges PASSED: All tests Icom IC-2820H Banks PASSED: All tests Icom IC-Q7A Detect PASSED: All tests Icom IC-Q7A CopyAll PASSED: All tests Icom IC-Q7A Clone PASSED: All tests Icom IC-Q7A BruteForce PASSED: All tests Icom IC-Q7A Edges PASSED: All tests Icom IC-Q7A Banks SKIPPED: Banks not supported Icom IC-T70 Detect PASSED: All tests Icom IC-T70 CopyAll PASSED: All tests Icom IC-T70 Clone PASSED: All tests Icom IC-T70 BruteForce PASSED: All tests Icom IC-T70 Edges PASSED: All tests Icom IC-T70 Banks PASSED: All tests Icom IC-T7H Detect PASSED: All tests Icom IC-T7H CopyAll PASSED: All tests Icom IC-T7H Clone PASSED: All tests Icom IC-T7H BruteForce PASSED: All tests Icom IC-T7H Edges PASSED: All tests Icom IC-T7H Banks SKIPPED: Banks not supported Icom IC-T8A Detect PASSED: All tests Icom IC-T8A CopyAll PASSED: All tests Icom IC-T8A Clone PASSED: All tests Icom IC-T8A BruteForce PASSED: All tests Icom IC-T8A Edges PASSED: All tests Icom IC-T8A Banks SKIPPED: Banks not supported Icom IC-V82/U82 Detect PASSED: All tests Icom IC-V82/U82 CopyAll PASSED: All tests Icom IC-V82/U82 Clone PASSED: All tests Icom IC-V82/U82 BruteForce PASSED: All tests Icom IC-V82/U82 Edges PASSED: All tests Icom IC-V82/U82 Banks PASSED: All tests Icom IC-W32A VHF Detect PASSED: All tests Icom IC-W32A VHF CopyAll PASSED: All tests Icom IC-W32A VHF Clone PASSED: All tests Icom IC-W32A VHF BruteForce PASSED: All tests Icom IC-W32A VHF Edges PASSED: All tests Icom IC-W32A VHF Banks SKIPPED: Banks not supported Icom IC-W32A UHF Detect PASSED: All tests Icom IC-W32A UHF CopyAll PASSED: All tests Icom IC-W32A UHF Clone PASSED: All tests Icom IC-W32A UHF BruteForce PASSED: All tests Icom IC-W32A UHF Edges PASSED: All tests Icom IC-W32A UHF Banks SKIPPED: Banks not supported Icom ID-31A Detect PASSED: All tests Icom ID-31A CopyAll PASSED: All tests Icom ID-31A Clone PASSED: All tests Icom ID-31A BruteForce PASSED: All tests Icom ID-31A Edges PASSED: All tests Icom ID-31A Banks PASSED: All tests Icom ID-51A Detect PASSED: All tests Icom ID-51A CopyAll PASSED: All tests Icom ID-51A Clone PASSED: All tests Icom ID-51A BruteForce PASSED: All tests Icom ID-51A Edges PASSED: All tests Icom ID-51A Banks PASSED: All tests Icom ID-800H v2 Detect PASSED: All tests Icom ID-800H v2 CopyAll PASSED: All tests Icom ID-800H v2 Clone PASSED: All tests Icom ID-800H v2 BruteForce PASSED: All tests Icom ID-800H v2 Edges PASSED: All tests Icom ID-800H v2 Banks PASSED: All tests Icom ID-880H Detect PASSED: All tests Icom ID-880H CopyAll PASSED: All tests Icom ID-880H Clone PASSED: All tests Icom ID-880H BruteForce PASSED: All tests Icom ID-880H Edges PASSED: All tests Icom ID-880H Banks PASSED: All tests Jetstream JT220M Detect PASSED: All tests Jetstream JT220M CopyAll PASSED: All tests Jetstream JT220M Clone PASSED: All tests Jetstream JT220M BruteForce PASSED: All tests Jetstream JT220M Edges PASSED: All tests Jetstream JT220M Banks SKIPPED: Banks not supported Kenwood TH-D72 (clone Detect PASSED: All tests Kenwood TH-D72 (clone CopyAll PASSED: All tests Kenwood TH-D72 (clone Clone PASSED: All tests Kenwood TH-D72 (clone BruteForce PASSED: All tests Kenwood TH-D72 (clone Edges PASSED: All tests Kenwood TH-D72 (clone Banks SKIPPED: Banks not supported Kenwood TK-8102 Detect PASSED: All tests Kenwood TK-8102 CopyAll PASSED: All tests Kenwood TK-8102 Clone PASSED: All tests Kenwood TK-8102 BruteForce PASSED: All tests Kenwood TK-8102 Edges PASSED: All tests Kenwood TK-8102 Banks SKIPPED: Banks not supported Puxing PX-2R Detect PASSED: All tests Puxing PX-2R CopyAll PASSED: All tests Puxing PX-2R Clone PASSED: All tests Puxing PX-2R BruteForce PASSED: All tests Puxing PX-2R Edges PASSED: All tests Puxing PX-2R Banks SKIPPED: Banks not supported Puxing PX-777 Detect PASSED: All tests Puxing PX-777 CopyAll PASSED: All tests Puxing PX-777 Clone PASSED: All tests Puxing PX-777 BruteForce PASSED: All tests Puxing PX-777 Edges PASSED: All tests Puxing PX-777 Banks SKIPPED: Banks not supported TYT TH-UV3R Detect PASSED: All tests TYT TH-UV3R CopyAll PASSED: All tests TYT TH-UV3R Clone PASSED: All tests TYT TH-UV3R BruteForce PASSED: All tests TYT TH-UV3R Edges PASSED: All tests TYT TH-UV3R Banks SKIPPED: Banks not supported TYT TH-UVF1 Detect PASSED: All tests TYT TH-UVF1 CopyAll PASSED: All tests TYT TH-UVF1 Clone PASSED: All tests TYT TH-UVF1 BruteForce PASSED: All tests TYT TH-UVF1 Edges PASSED: All tests TYT TH-UVF1 Banks SKIPPED: Banks not supported Vertex VXA-700 Detect PASSED: All tests Vertex VXA-700 CopyAll PASSED: All tests Vertex VXA-700 Clone PASSED: All tests Vertex VXA-700 BruteForce PASSED: All tests Vertex VXA-700 Edges PASSED: All tests Vertex VXA-700 Banks SKIPPED: Banks not supported Wouxun KG-816 Detect PASSED: All tests Wouxun KG-816 CopyAll PASSED: All tests Wouxun KG-816 Clone PASSED: All tests Wouxun KG-816 BruteForce PASSED: All tests Wouxun KG-816 Edges PASSED: All tests Wouxun KG-816 Banks SKIPPED: Banks not supported Wouxun KG-818 Detect PASSED: All tests Wouxun KG-818 CopyAll PASSED: All tests Wouxun KG-818 Clone PASSED: All tests Wouxun KG-818 BruteForce PASSED: All tests Wouxun KG-818 Edges PASSED: All tests Wouxun KG-818 Banks SKIPPED: Banks not supported Wouxun KG-UV6 Detect PASSED: All tests Wouxun KG-UV6 CopyAll PASSED: All tests Wouxun KG-UV6 Clone PASSED: All tests Wouxun KG-UV6 BruteForce PASSED: All tests Wouxun KG-UV6 Edges PASSED: All tests Wouxun KG-UV6 Banks SKIPPED: Banks not supported Wouxun KG-UVD1P Detect PASSED: All tests Wouxun KG-UVD1P CopyAll PASSED: All tests Wouxun KG-UVD1P Clone PASSED: All tests Wouxun KG-UVD1P BruteForce PASSED: All tests Wouxun KG-UVD1P Edges PASSED: All tests Wouxun KG-UVD1P Banks SKIPPED: Banks not supported Yaesu FT-1802M Detect PASSED: All tests Yaesu FT-1802M CopyAll PASSED: All tests Yaesu FT-1802M Clone PASSED: All tests Yaesu FT-1802M BruteForce PASSED: All tests Yaesu FT-1802M Edges PASSED: All tests Yaesu FT-1802M Banks SKIPPED: Banks not supported Yaesu FT-2800M Detect PASSED: All tests Yaesu FT-2800M CopyAll PASSED: All tests Yaesu FT-2800M Clone PASSED: All tests Yaesu FT-2800M BruteForce PASSED: All tests Yaesu FT-2800M Edges PASSED: All tests Yaesu FT-2800M Banks SKIPPED: Banks not supported Yaesu FT-60 Detect PASSED: All tests Yaesu FT-60 CopyAll PASSED: All tests Yaesu FT-60 Clone PASSED: All tests Yaesu FT-60 BruteForce PASSED: All tests Yaesu FT-60 Edges PASSED: All tests Yaesu FT-60 Banks SKIPPED: Banks not supported Yaesu FT-7800 Detect PASSED: All tests Yaesu FT-7800 CopyAll PASSED: All tests Yaesu FT-7800 Clone PASSED: All tests Yaesu FT-7800 BruteForce PASSED: All tests Yaesu FT-7800 Edges PASSED: All tests Yaesu FT-7800 Banks PASSED: All tests Yaesu FT-817 Detect PASSED: All tests Yaesu FT-817 CopyAll PASSED: All tests Yaesu FT-817 Clone PASSED: All tests Yaesu FT-817 BruteForce PASSED: All tests Yaesu FT-817 Edges PASSED: All tests Yaesu FT-817 Banks SKIPPED: Banks not supported Yaesu FT-817ND Detect PASSED: All tests Yaesu FT-817ND CopyAll PASSED: All tests Yaesu FT-817ND Clone PASSED: All tests Yaesu FT-817ND BruteForce PASSED: All tests Yaesu FT-817ND Edges PASSED: All tests Yaesu FT-817ND Banks SKIPPED: Banks not supported Yaesu FT-817ND (US) Detect PASSED: All tests Yaesu FT-817ND (US) CopyAll PASSED: All tests Yaesu FT-817ND (US) Clone PASSED: All tests Yaesu FT-817ND (US) BruteForce PASSED: All tests Yaesu FT-817ND (US) Edges PASSED: All tests Yaesu FT-817ND (US) Banks SKIPPED: Banks not supported Yaesu FT-857/897 Detect PASSED: All tests Yaesu FT-857/897 CopyAll PASSED: All tests Yaesu FT-857/897 Clone PASSED: All tests Yaesu FT-857/897 BruteForce PASSED: All tests Yaesu FT-857/897 Edges PASSED: All tests Yaesu FT-857/897 Banks SKIPPED: Banks not supported Yaesu FT-857/897 (U Detect PASSED: All tests Yaesu FT-857/897 (U CopyAll PASSED: All tests Yaesu FT-857/897 (U Clone PASSED: All tests Yaesu FT-857/897 (U BruteForce PASSED: All tests Yaesu FT-857/897 (U Edges PASSED: All tests Yaesu FT-857/897 (U Banks SKIPPED: Banks not supported Yaesu FT-8800 Left Detect PASSED: All tests Yaesu FT-8800 Left CopyAll PASSED: All tests Yaesu FT-8800 Left Clone PASSED: All tests Yaesu FT-8800 Left BruteForce PASSED: All tests Yaesu FT-8800 Left Edges PASSED: All tests Yaesu FT-8800 Left Banks PASSED: All tests Yaesu FT-8800 Right Detect PASSED: All tests Yaesu FT-8800 Right CopyAll PASSED: All tests Yaesu FT-8800 Right Clone PASSED: All tests Yaesu FT-8800 Right BruteForce PASSED: All tests Yaesu FT-8800 Right Edges PASSED: All tests Yaesu FT-8800 Right Banks PASSED: All tests Yaesu FT-8900 Detect PASSED: All tests Yaesu FT-8900 CopyAll PASSED: All tests Yaesu FT-8900 Clone PASSED: All tests Yaesu FT-8900 BruteForce PASSED: All tests Yaesu FT-8900 Edges PASSED: All tests Yaesu FT-8900 Banks SKIPPED: Banks not supported Yaesu FTM-350 Left Detect PASSED: All tests Yaesu FTM-350 Left CopyAll PASSED: All tests Yaesu FTM-350 Left Clone PASSED: All tests Yaesu FTM-350 Left BruteForce PASSED: All tests Yaesu FTM-350 Left Edges PASSED: All tests Yaesu FTM-350 Left Banks SKIPPED: Banks not supported Yaesu FTM-350 Right Detect PASSED: All tests Yaesu FTM-350 Right CopyAll PASSED: All tests Yaesu FTM-350 Right Clone PASSED: All tests Yaesu FTM-350 Right BruteForce PASSED: All tests Yaesu FTM-350 Right Edges PASSED: All tests Yaesu FTM-350 Right Banks SKIPPED: Banks not supported Yaesu VX-3 Detect PASSED: All tests Yaesu VX-3 CopyAll PASSED: All tests Yaesu VX-3 Clone PASSED: All tests Yaesu VX-3 BruteForce PASSED: All tests Yaesu VX-3 Edges PASSED: All tests Yaesu VX-3 Banks SKIPPED: Banks not supported Yaesu VX-5 Detect PASSED: All tests Yaesu VX-5 CopyAll PASSED: All tests Yaesu VX-5 Clone PASSED: All tests Yaesu VX-5 BruteForce PASSED: All tests Yaesu VX-5 Edges PASSED: All tests Yaesu VX-5 Banks PASSED: All tests Yaesu VX-6 Detect PASSED: All tests Yaesu VX-6 CopyAll PASSED: All tests Yaesu VX-6 Clone PASSED: All tests Yaesu VX-6 BruteForce PASSED: All tests Yaesu VX-6 Edges PASSED: All tests Yaesu VX-6 Banks SKIPPED: Banks not supported Yaesu VX-7 Detect PASSED: All tests Yaesu VX-7 CopyAll PASSED: All tests Yaesu VX-7 Clone PASSED: All tests Yaesu VX-7 BruteForce PASSED: All tests Yaesu VX-7 Edges PASSED: All tests Yaesu VX-7 Banks PASSED: All tests Yaesu VX-8 R Detect PASSED: All tests Yaesu VX-8 R CopyAll PASSED: All tests Yaesu VX-8 R Clone PASSED: All tests Yaesu VX-8 R BruteForce PASSED: All tests Yaesu VX-8 R Edges PASSED: All tests Yaesu VX-8 R Banks PASSED: All tests ---------------------------------------------------------------------- Results: TOTAL : 324 FAILED : 0 SKIPPED: 38 PASSED : 286 CRASHED: 0 [workspace] $ /bin/sh -xe /tmp/hudson4814990430146365165.sh + nosetests -v tests/unit test_bit_array (tests.unit.test_bitwise.TestBitType) ... ok test_bit_array_fail (tests.unit.test_bitwise.TestBitType) ... ok test_bitfield_u16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_u24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_u8 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_ul16 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bitfield_ul24 (tests.unit.test_bitwise.TestBitfieldTypes) ... ok test_bbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_bbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_lbcd (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_lbcd_array (tests.unit.test_bitwise.TestBitwiseBCDTypes) ... ok test_type_u16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_u8 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul16 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul24 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_type_ul32 (tests.unit.test_bitwise.TestBitwiseBaseIntTypes) ... ok test_char (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_string_wrong_length (tests.unit.test_bitwise.TestBitwiseCharTypes) ... ok test_missing_semicolon (tests.unit.test_bitwise.TestBitwiseErrors) ... ok test_seek (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_seekto (tests.unit.test_bitwise.TestBitwiseSeek) ... ok test_struct_one_element (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_two_elements (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok test_struct_writes (tests.unit.test_bitwise.TestBitwiseStructTypes) ... ok split_tone_encode_test_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_none (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok split_tone_encode_test_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_dtcs_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_none_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_cross_tone_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_dtcs (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_none (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tone (tests.unit.test_chirp_common.TestSplitTone) ... ok test_split_tone_decode_tsql (tests.unit.test_chirp_common.TestSplitTone) ... ok test_fix_rounded_step_250 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_500 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_fix_rounded_step_750 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_12_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_2_5 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_5_0 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_6_25 (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_is_fractional_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_required_step_fail (tests.unit.test_chirp_common.TestStepFunctions) ... ok test_format_freq (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_bad (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_decimal (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whitespace (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_parse_freq_whole (tests.unit.test_chirp_common.TestUtilityFunctions) ... ok test_ensure_has_calls_almost_full (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_empty (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_partial (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full1 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_rptcall_full2 (tests.unit.test_import_logic.DstarTests) ... ok test_ensure_has_calls_urcall_full (tests.unit.test_import_logic.DstarTests) ... ok test_import_bank (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffA_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_dtcs_diffB_dtcs (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_negative (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_too_big_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_uhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_duplex_vhf (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_errors (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mem_with_warnings (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_invalid (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_am (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_mode_valid_fm (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_name (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_closest (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_dst (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_no_src (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_power_same (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffA_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_import_tone_diffB_tsql (tests.unit.test_import_logic.ImportFieldTests) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseBank) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseBankModel) ... ok test_mapping (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestBaseMapping) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_get_name (tests.unit.test_mappingmodel.TestBaseMappingModel) ... ok test_base_class (tests.unit.test_mappingmodel.TestBaseMappingModelIndexInterface) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomBankModel) ... ok test_icom_bank (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_mapping_eq (tests.unit.test_mappingmodel.TestIcomBanks) ... ok test_add_memory_to_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_index_bounds (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mapping_memories (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_memory_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_next_mapping_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_get_num_mappings (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_no_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_remove_memory_from_mapping_wrong_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_bank (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_set_memory_index_bad_index (tests.unit.test_mappingmodel.TestIcomIndexedBankModel) ... ok test_auto_tone_mode_cross (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_pol (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_dtcs_rx (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tone (tests.unit.test_memedit_edits.TestEdits) ... ok test_auto_tone_mode_tsql (tests.unit.test_memedit_edits.TestEdits) ... ok test_init (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_bad_portnames (tests.unit.test_platform.Win32PlatformTest) ... ok test_serial_ports_sorted (tests.unit.test_platform.Win32PlatformTest) ... ok test_apply_callback (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_group (tests.unit.test_settings.TestSettingContainers) ... ok test_radio_setting_multi (tests.unit.test_settings.TestSettingContainers) ... ok test_changed (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_boolean (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_float (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_integer (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_list (tests.unit.test_settings.TestSettingValues) ... ok test_radio_setting_value_string (tests.unit.test_settings.TestSettingValues) ... ok test_validate_callback (tests.unit.test_settings.TestSettingValues) ... ok test_delete_hole_with_all (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_all_full (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_with_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_delete_hole_without_hole (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_with_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok test_insert_hole_without_space (tests.unit.test_shiftdialog.ShiftDialogTest) ... ok ---------------------------------------------------------------------- Ran 147 tests in 0.059s OK Email was triggered for: Success Sending email for trigger: Success

1 0

[chirp_devel] [PATCH] Fix radio browser exposing children in tree with nothing to see
by Dan Smith 08 Sep '13

08 Sep '13

# HG changeset patch # User Dan Smith <dsmith(a)danplanet.com> # Date 1378685894 25200 # Node ID 47fbab94e7c1121fd3efe3c0baa344768ea722d2 # Parent 9a3c970aec76fc46ab49750dd1df3711aafb87ee Fix radio browser exposing children in tree with nothing to see Right now, the radio browser will expose the elements of an array as children in the tree, but clicking on them yields nothing as arrays are exposed at the top level. This avoids adding those elements to the tree to avoid confusion. (need a bug here) diff -r 9a3c970aec76 -r 47fbab94e7c1 chirpui/radiobrowser.py --- a/chirpui/radiobrowser.py Sun Sep 08 17:18:08 2013 -0700 +++ b/chirpui/radiobrowser.py Sun Sep 08 17:18:14 2013 -0700 @@ -234,7 +234,8 @@ elif isinstance(obj, bitwise.arrayDataElement): i = 0 for item in obj: - self._fill("%s[%i]" % (name, i), item, iter) + if isinstance(obj[0], bitwise.structDataElement): + self._fill("%s[%i]" % (name, i), item, iter) i += 1 def _tree_click(self, view, event):

1 0

[chirp_devel] [PATCH] [bf888] Standardize cloning routines and change name
by Dan Smith 08 Sep '13

08 Sep '13

# HG changeset patch # User Dan Smith <dsmith(a)danplanet.com> # Date 1378685888 25200 # Node ID 9a3c970aec76fc46ab49750dd1df3711aafb87ee # Parent ec2693debe95d81aa0d01108236e04e380e8208b [bf888] Standardize cloning routines and change name This patch makes the BF888/H777 driver pass the functional tests. Most of the change is around making the clone routines return conventional error messages and the proper exceptions for errors. Also, to run the functional tests, we have to have a predictable VENDOR and MODEL for the driver. The chinese name is cool (and correct) but it's going to get in the way of testing on some systems. For now, call this driver the Baofeng BF-888. Later, if we can figure out how to differentiate files for them, we can have a subclass for the H777. Related to #701 diff -r ec2693debe95 -r 9a3c970aec76 chirp/h777.py --- a/chirp/h777.py Sun Sep 08 17:18:02 2013 -0700 +++ b/chirp/h777.py Sun Sep 08 17:18:08 2013 -0700 @@ -17,11 +17,10 @@ import time import os import struct -import sys import unittest from chirp import chirp_common, directory, memmap -from chirp import bitwise +from chirp import bitwise, errors, util from chirp.settings import RadioSetting, RadioSettingGroup, \ RadioSettingValueInteger, RadioSettingValueList, \ RadioSettingValueBoolean @@ -89,34 +88,47 @@ "voice" : VOICE_LIST, } -def debug_print_hex(hexstr): - for a in range(0, len(hexstr)): - sys.stdout.write("%02x " % (ord(hexstr[a]))) - def _h777_enter_programming_mode(radio): serial = radio.pipe - serial.write("\x02") - time.sleep(0.1) - serial.write("PROGRAM") - if serial.read(1) != CMD_ACK: - raise Exception("Didn't get a response from the radio. " - "Is it turned on and plugged in firmly?") + try: + serial.write("\x02") + time.sleep(0.1) + serial.write("PROGRAM") + ack = serial.read(1) + except: + raise errors.RadioError("Error communicating with radio") - serial.write("\x02") - ident = serial.read(8) + if not ack: + raise errors.RadioError("No response from radio") + elif ack != CMD_ACK: + raise errors.RadioError("Radio refused to enter programming mode") + + try: + serial.write("\x02") + ident = serial.read(8) + except: + raise errors.RadioError("Error communicating with radio") + if not ident.startswith("P3107"): - raise Exception("Invalid response. " - "Is this really the correct model of radio?") + print util.hexprint(ident) + raise errors.RadioError("Radio returned unknown identification string") - serial.write(CMD_ACK) - if serial.read(1) != CMD_ACK: - raise Exception("Invalid response. " - "Is this really the correct model of radio?") + try: + serial.write(CMD_ACK) + ack = serial.read(1) + except: + raise errors.RadioError("Error communicating with radio") + + if ack != CMD_ACK: + raise errors.RadioError("Radio refused to enter programming mode") def _h777_exit_programming_mode(radio): serial = radio.pipe - serial.write("E") + try: + serial.write("E") + except: + raise errors.RadioError("Radio refused to exit programming mode") def _h777_read_block(radio, block_addr, block_size): serial = radio.pipe @@ -126,15 +138,20 @@ if DEBUG: print("Reading block %04x..." % (block_addr)) - serial.write(cmd) - response = serial.read(4 + BLOCK_SIZE) - if response[:4] != expectedresponse: - raise Exception("Error reading block %04x." % (block_addr)) + try: + serial.write(cmd) + response = serial.read(4 + BLOCK_SIZE) + if response[:4] != expectedresponse: + raise Exception("Error reading block %04x." % (block_addr)) - block_data = response[4:] + block_data = response[4:] - serial.write(CMD_ACK) - if serial.read(1) != CMD_ACK: + serial.write(CMD_ACK) + ack = serial.read(1) + except: + raise errors.RadioError("Failed to read block at %04x" % block_addr) + + if ack != CMD_ACK: raise Exception("No ACK reading block %04x." % (block_addr)) return block_data @@ -147,13 +164,15 @@ if DEBUG: print("Writing Data:") - debug_print_hex(cmd + data) - print("") + print util.hexprint(cmd + data) - serial.write(cmd + data) - - if serial.read(1) != CMD_ACK: - raise Exception("No ACK") + try: + serial.write(cmd + data) + if serial.read(1) != CMD_ACK: + raise Exception("No ACK") + except: + raise errors.RadioError("Failed to send block " + "to radio at %04x" % block_addr) def do_download(radio): print "download" @@ -175,9 +194,8 @@ data += block if DEBUG: - sys.stdout.write("%04x: " % (addr)) - debug_print_hex(block) - print("") + print "Address: %04x" % addr + print util.hexprint(block) _h777_exit_programming_mode(radio) @@ -210,8 +228,10 @@ @maybe_register class H777Radio(chirp_common.CloneModeRadio): """HST H-777""" - VENDOR = "Heng Shun Tong (恒顺通)" - MODEL = "H-777" + # VENDOR = "Heng Shun Tong (恒顺通)" + # MODEL = "H-777" + VENDOR = "Baofeng" + MODEL = "BF-888" BAUD_RATE = 9600 # This code currently requires that ranges start at 0x0000

1 0

[chirp_devel] [PATCH] [bf888] Finish BCL and BS flags and fix other inverted ones
by Dan Smith 08 Sep '13

08 Sep '13

# HG changeset patch # User Dan Smith <dsmith(a)danplanet.com> # Date 1378685882 25200 # Node ID ec2693debe95d81aa0d01108236e04e380e8208b # Parent c12b1bd79697023039d0fb6af8322d1be02b742b [bf888] Finish BCL and BS flags and fix other inverted ones This adds Busy Channel Lockout and Beat Shift per-memory settings. The power, mode, and skip flags were also inverted, so this fixes that as well as punts on further decoding memory data if we determine that it is empty. Related to #701 diff -r c12b1bd79697 -r ec2693debe95 chirp/h777.py --- a/chirp/h777.py Sun Sep 08 17:17:56 2013 -0700 +++ b/chirp/h777.py Sun Sep 08 17:18:02 2013 -0700 @@ -38,9 +38,9 @@ u8 unknown3:1, unknown2:1, unknown1:1, - scanadd:1, - lowpower:1, - wide:1, + skip:1, + highpower:1, + narrow:1, beatshift:1, bcl:1; u8 unknown4[3]; @@ -76,8 +76,8 @@ range(0x0380, 0x03e0, 8)] # TODO: Is it 1 watt? -H777_POWER_LEVELS = [chirp_common.PowerLevel("High", watts=5.00), - chirp_common.PowerLevel("Low", watts=1.00)] +H777_POWER_LEVELS = [chirp_common.PowerLevel("Low", watts=1.00), + chirp_common.PowerLevel("High", watts=5.00)] VOICE_LIST = ["English", "Chinese"] SIDEKEYFUNCTION_LIST = ["Off", "Monitor", "Transmit Power", "Alarm"] TIMEOUTTIMER_LIST = ["Off", "30 seconds", "60 seconds", "90 seconds", @@ -245,8 +245,7 @@ rf.has_name = False rf.memory_bounds = (1, 16) rf.valid_bands = [(400000000, 470000000)] - rf.valid_power_levels = [chirp_common.PowerLevel("High", watts=5.00), - chirp_common.PowerLevel("Low", watts=1.0)] + rf.valid_power_levels = H777_POWER_LEVELS return rf @@ -298,12 +297,12 @@ # We'll consider any blank (i.e. 0MHz frequency) to be empty if mem.freq == 0: mem.empty = True + return mem if _mem.rxfreq.get_raw() == "\xFF\xFF\xFF\xFF": mem.freq = 0 mem.empty = True - - # TODO: Support empty TX frequency + return mem if int(_mem.rxfreq) == int(_mem.txfreq): mem.duplex = "" @@ -312,18 +311,22 @@ mem.duplex = int(_mem.rxfreq) > int(_mem.txfreq) and "-" or "+" mem.offset = abs(int(_mem.rxfreq) - int(_mem.txfreq)) * 10 - mem.mode = not _mem.wide and "FM" or "NFM" - mem.power = H777_POWER_LEVELS[not _mem.lowpower] - # TODO: Invert lowpower flag? + mem.mode = not _mem.narrow and "FM" or "NFM" + mem.power = H777_POWER_LEVELS[_mem.highpower] - if not _mem.scanadd: - mem.skip = "S" + mem.skip = _mem.skip and "S" or "" txtone = self._decode_tone(_mem.txtone) rxtone = self._decode_tone(_mem.rxtone) chirp_common.split_tone_decode(mem, txtone, rxtone) - # TODO: Set beatshift and bcl. + mem.extra = RadioSettingGroup("Extra", "extra") + rs = RadioSetting("bcl", "Busy Channel Lockout", + RadioSettingValueBoolean(not _mem.bcl)) + mem.extra.append(rs) + rs = RadioSetting("beatshift", "Beat Shift", + RadioSettingValueBoolean(not _mem.beatshift)) + mem.extra.append(rs) return mem @@ -349,16 +352,17 @@ else: _mem.txfreq = mem.freq / 10 - # TODO: Support empty TX frequency - txtone, rxtone = chirp_common.split_tone_encode(mem) self._encode_tone(_mem.txtone, *txtone) self._encode_tone(_mem.rxtone, *rxtone) - _mem.wide = mem.mode != 0 - _mem.lowpower = mem.power == 1 - _mem.scanadd = mem.skip != "S" - # TODO: Set beatshift and bcl. + _mem.narrow = 'N' in mem.mode + _mem.highpower = mem.power == H777_POWER_LEVELS[1] + _mem.skip = mem.skip == "S" + + for setting in mem.extra: + # NOTE: Only two settings right now, both are inverted + setattr(_mem, setting.get_name(), not setting.value) def get_settings(self): _settings = self._memobj.settings

1 0

[chirp_devel] [PATCH] [bf888] Finish tone encoding and decoding
by Dan Smith 08 Sep '13

08 Sep '13

# HG changeset patch # User Dan Smith <dsmith(a)danplanet.com> # Date 1378685876 25200 # Node ID c12b1bd79697023039d0fb6af8322d1be02b742b # Parent ea130e31f030c2db47808b6a327900074e27c3f3 [bf888] Finish tone encoding and decoding This finishes Tone and DTCS encode/decode, as well as adds support for all the Cross variations. Related to #701 diff -r ea130e31f030 -r c12b1bd79697 chirp/h777.py --- a/chirp/h777.py Sun Sep 08 10:50:00 2013 -0700 +++ b/chirp/h777.py Sun Sep 08 17:17:56 2013 -0700 @@ -18,6 +18,7 @@ import os import struct import sys +import unittest from chirp import chirp_common, directory, memmap from chirp import bitwise @@ -235,15 +236,10 @@ rf.has_settings = True rf.valid_modes = ["NFM", "FM"] # 12.5 KHz, 25 kHz. rf.valid_skips = ["", "S"] - # TODO: Support CTCSS and DCS. - # rf.valid_tmodes = ["", "TSQL", "DTCS"] - # rf.has_ctone = True - # rf.has_cross = True - # rf.has_rx_dtcs = True - rf.valid_tmodes = [""] - rf.has_ctone = False - rf.has_cross = False - rf.has_rx_dtcs = False + rf.valid_tmodes = ["", "Tone", "TSQL", "DTCS", "Cross"] + rf.has_rx_dtcs = True + rf.has_ctone = True + rf.has_cross = True rf.has_tuning_step = False rf.has_bank = False rf.has_name = False @@ -267,6 +263,30 @@ def get_raw_memory(self, number): return repr(self._memobj.memory[number - 1]) + def _decode_tone(self, val): + val = int(val) + if val == 16665: + return '', None, None + elif val >= 12000: + return 'DTCS', val - 12000, 'R' + elif val >= 8000: + return 'DTCS', val - 8000, 'N' + else: + return 'Tone', val / 10.0, None + + def _encode_tone(self, memval, mode, value, pol): + if mode == '': + memval[0].set_raw(0xFF) + memval[1].set_raw(0xFF) + elif mode == 'Tone': + memval.set_value(int(value * 10)) + elif mode == 'DTCS': + flag = 0x80 if pol == 'N' else 0xC0 + memval.set_value(value) + memval[1].set_bits(flag) + else: + raise Exception("Internal error: invalid mode `%s'" % mode) + def get_memory(self, number): _mem = self._memobj.memory[number - 1] @@ -299,26 +319,9 @@ if not _mem.scanadd: mem.skip = "S" - # Decode CTCSS/DCS, if used. - - if _mem.rxtone.get_raw() == "\xFF\xFF": - mem.tmode = "" - else: - if ord(_mem.rxtone[1].get_raw()) & 0x80: - # TODO: Make DCS work. - raise Exception("Sorry, DCS isn't supported yet.") - mem.tmode = "DTCS" - mem.rx_dtcs = int(_mem.rxtone.get_raw() & 0x0FFF) - mem.dtcs = int(_mem.txtone.get_raw() & 0x0FFF) - - if ord(_mem.rxtone[1].get_raw()) & 0x40: - mem.dtsc_polarity = "R" - else: - print("DCS N") - else: - mem.tmode = "TSQL" - mem.rtone = int(_mem.rxtone) / 10.0 - mem.ctone = int(_mem.txtone) / 10.0 + txtone = self._decode_tone(_mem.txtone) + rxtone = self._decode_tone(_mem.rxtone) + chirp_common.split_tone_decode(mem, txtone, rxtone) # TODO: Set beatshift and bcl. @@ -348,6 +351,10 @@ # TODO: Support empty TX frequency + txtone, rxtone = chirp_common.split_tone_encode(mem) + self._encode_tone(_mem.txtone, *txtone) + self._encode_tone(_mem.rxtone, *rxtone) + _mem.wide = mem.mode != 0 _mem.lowpower = mem.power == 1 _mem.scanadd = mem.skip != "S" @@ -432,3 +439,49 @@ basic.append(rs) return basic + +class H777TestCase(unittest.TestCase): + def setUp(self): + self.driver = H777Radio(None) + self.testdata = bitwise.parse("lbcd foo[2];", + memmap.MemoryMap("\x00\x00")) + + def test_decode_tone_dtcs_normal(self): + mode, value, pol = self.driver._decode_tone(8023) + self.assertEqual('DTCS', mode) + self.assertEqual(23, value) + self.assertEqual('N', pol) + + def test_decode_tone_dtcs_rev(self): + mode, value, pol = self.driver._decode_tone(12023) + self.assertEqual('DTCS', mode) + self.assertEqual(23, value) + self.assertEqual('R', pol) + + def test_decode_tone_tone(self): + mode, value, pol = self.driver._decode_tone(885) + self.assertEqual('Tone', mode) + self.assertEqual(88.5, value) + self.assertEqual(None, pol) + + def test_decode_tone_none(self): + mode, value, pol = self.driver._decode_tone(16665) + self.assertEqual('', mode) + self.assertEqual(None, value) + self.assertEqual(None, pol) + + def test_encode_tone_dtcs_normal(self): + self.driver._encode_tone(self.testdata.foo, 'DTCS', 23, 'N') + self.assertEqual(8023, int(self.testdata.foo)) + + def test_encode_tone_dtcs_rev(self): + self.driver._encode_tone(self.testdata.foo, 'DTCS', 23, 'R') + self.assertEqual(12023, int(self.testdata.foo)) + + def test_encode_tone(self): + self.driver._encode_tone(self.testdata.foo, 'Tone', 88.5, 'N') + self.assertEqual(885, int(self.testdata.foo)) + + def test_encode_tone_none(self): + self.driver._encode_tone(self.testdata.foo, '', 67.0, 'N') + self.assertEqual(16665, int(self.testdata.foo))

1 0

[chirp_devel] [PATCH] [bf888] Fix get_raw_memory() index
by Dan Smith 08 Sep '13

08 Sep '13

# HG changeset patch # User Dan Smith <dsmith(a)danplanet.com> # Date 1378662600 25200 # Node ID ea130e31f030c2db47808b6a327900074e27c3f3 # Parent 7cf9697bdc98b0d99f2c097a45c37112b4a107e3 [bf888] Fix get_raw_memory() index This makes the get_raw_memory() function properly return the n-1'th memory. Related to #701 diff -r 7cf9697bdc98 -r ea130e31f030 chirp/h777.py --- a/chirp/h777.py Sun Sep 08 10:50:00 2013 -0700 +++ b/chirp/h777.py Sun Sep 08 10:50:00 2013 -0700 @@ -265,7 +265,7 @@ do_upload(self) def get_raw_memory(self, number): - return repr(self._memobj.memory[number]) + return repr(self._memobj.memory[number - 1]) def get_memory(self, number): _mem = self._memobj.memory[number - 1]

1 0

[chirp_devel] [PATCH] [kg-uv6] Fix fm preset locations and numbers
by Marco Filippi IZ3GME 08 Sep '13

08 Sep '13

# HG changeset patch # User Marco Filippi <iz3gme.marco(a)gmail.com> # Date 1378654461 -7200 # Node ID 2fdf058355458deb31f1fcb711437ee71dd24ba1 # Parent b5cced8e6c9da6d5ed82200cd62021fca74e926e [kg-uv6] Fix fm preset locations and numbers Fix #1115 diff -r b5cced8e6c9d -r 2fdf05835545 chirp/wouxun.py --- a/chirp/wouxun.py ven set 06 22:40:43 2013 -0500 +++ b/chirp/wouxun.py dom set 08 17:34:21 2013 +0200 @@ -646,7 +646,7 @@ u8 pad[2]; } vfo_settings[2]; - #seekto 0x0f80; + #seekto 0x0f82; u16 fm_presets_0[9]; #seekto 0x0ff0; @@ -675,7 +675,7 @@ u8 pad[9]; } vfo_offset[2]; - #seekto 0x1f80; + #seekto 0x1f82; u16 fm_presets_1[9]; """ @@ -919,23 +919,25 @@ for i in range(0, 9): if self._memobj.fm_presets_0[i] != 0xFFFF: - rs = RadioSetting("fm_presets_0_%1i" % i, "Bank 0 Location %i" % i, - RadioSettingValueBoolean(True), - RadioSettingValueFloat(76, 108, self._memobj.fm_presets_0[i]/10.0+76, 0.1, 1)) + used = True + preset = self._memobj.fm_presets_0[i]/10.0+76 else: - rs = RadioSetting("fm_presets_0_%1i" % i, "Bank 0 Location %i" % i, - RadioSettingValueBoolean(False), - RadioSettingValueFloat(76, 108, 76, 0.1, 1)) + used = False + preset = 76 + rs = RadioSetting("fm_presets_0_%1i" % i, "Team 1 Location %i" % (i+1), + RadioSettingValueBoolean(used), + RadioSettingValueFloat(76, 108, preset, 0.1, 1)) fm_preset.append(rs) for i in range(0, 9): if self._memobj.fm_presets_1[i] != 0xFFFF: - rs = RadioSetting("fm_presets_1_%1i" % i, "Bank 1 Location %i" % i, - RadioSettingValueBoolean(True), - RadioSettingValueFloat(76, 108, self._memobj.fm_presets_1[i]/10.0+76, 0.1, 1)) + used = True + preset = self._memobj.fm_presets_1[i]/10.0+76 else: - rs = RadioSetting("fm_presets_1_%1i" % i, "Bank 1 Location %i" % i, - RadioSettingValueBoolean(False), - RadioSettingValueFloat(76, 108, 76, 0.1, 1)) + used = False + preset = 76 + rs = RadioSetting("fm_presets_1_%1i" % i, "Team 2 Location %i" % (i+1), + RadioSettingValueBoolean(used), + RadioSettingValueFloat(76, 108, preset, 0.1, 1)) fm_preset.append(rs) return top

2 2

[chirp_devel] [PATCH] [bf888] Fix get_raw_memory() index
by Dan Smith 07 Sep '13

07 Sep '13

# HG changeset patch # User Dan Smith <dsmith(a)danplanet.com> # Date 1378596131 25200 # Node ID 1e97061342fcb64c298ca3821f385954842d0d2a # Parent bc4607851214a20f80aec300b7148fb5d8773758 [bf888] Fix get_raw_memory() index This makes the get_raw_memory() function properly return the n-1'th memory. Related to #701 diff -r bc4607851214 -r 1e97061342fc chirp/h777.py --- a/chirp/h777.py Sat Sep 07 16:04:20 2013 -0700 +++ b/chirp/h777.py Sat Sep 07 16:22:11 2013 -0700 @@ -265,7 +265,7 @@ do_upload(self) def get_raw_memory(self, number): - return repr(self._memobj.memory[number]) + return repr(self._memobj.memory[number - 1]) def get_memory(self, number): _mem = self._memobj.memory[number - 1]

1 0