[chirp_users] Baofeng UV-5R and Wouxun KG-UVD8
Hi!
Got problems when try to program one off my Baofeng UV-5R.
See the screens dumps below.
Using the daily file from 20150416.
Using Baofeng software the radio works.
The other UV-5R works fine both with Chirp and Baofeng software
When programing Wouxun KG-UVD8 it seems like some parameters don´t transfers to the radio.
/Rolle
Rolle Stavlind
Ledinge Kvarnbol 444
741 90 Knivsta
Tel 018-345597
Mobil 070-5219597
Mail mailto:rolle@stavlind.se rolle@stavlind.se
The two image files are not compatible. CHIRP supports over 80 makes and models of radio.
You must first create an initial template for your specific model. This gives CHIRP a starting image of your radio and firmware. This is done by selecting the Radio tab in the CHIRP toolbar and perform a Download_from_Radio. This loads your radio's initial parameters.
You can now either Cut/Paste or Import the frequencies into your new template for the UV8D.
John
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Rolle Stavlind POP3 Sent: Monday, April 20, 2015 1:40 AM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Baofeng UV-5R and Wouxun KG-UVD8
Hi!
Got problems when try to program one off my Baofeng UV-5R.
See the screens dumps below.
Using the daily file from 20150416.
Using Baofeng software the radio works.
The other UV-5R works fine both with Chirp and Baofeng software
When programing Wouxun KG-UVD8 it seems like some parameters don´t transfers to the radio.
/Rolle
Rolle Stavlind
Ledinge Kvarnbol 444
741 90 Knivsta
Tel 018-345597
Mobil 070-5219597
Mail rolle@stavlind.se
Hi!
As you can see on the third clip. It is even impossible to download from the radio.
I have no problems with the other stations.
/Rolle
---
Rolle Stavlind Ledinge Kvarnbol 444 741 90 Knivsta Tel 018-345597
GSM 070-5219597
FAX 070-6109597 E-post rolle@stavlind.se
2015-04-20 12:50 skrev John LaMartina:
The two image files are not compatible. CHIRP supports over 80 makes and models of radio.
You must first create an initial template for your specific model. This gives CHIRP a starting image of your radio and firmware. This is done by selecting the Radio tab in the CHIRP toolbar and perform a Download_from_Radio. This loads your radio's initial parameters.
You can now either Cut/Paste or Import the frequencies into your new template for the UV8D.
John
FROM: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] ON BEHALF OF Rolle Stavlind POP3 SENT: Monday, April 20, 2015 1:40 AM TO: chirp_users@intrepid.danplanet.com SUBJECT: [chirp_users] Baofeng UV-5R and Wouxun KG-UVD8
Hi!
Got problems when try to program one off my Baofeng UV-5R.
See the screens dumps below.
Using the daily file from 20150416.
Using Baofeng software the radio works.
The other UV-5R works fine both with Chirp and Baofeng software
When programing Wouxun KG-UVD8 it seems like some parameters don´t transfers to the radio.
/Rolle
ROLLE STAVLIND
Ledinge Kvarnbol 444
741 90 Knivsta
Tel 018-345597
Mobil 070-5219597
Mail rolle@stavlind.se
I have had same issue on several of them removing antenna and turning up volume helped still took 20 try's
Start by doing what's necessary; then do what's possible; and suddenly you are doing the impossible.
On Apr 20, 2015, at 7:19 AM, Rolle Stavlind rolle@stavlind.se wrote:
Hi!
As you can see on the third clip. It is even impossible to download from the radio.
I have no problems with the other stations.
/Rolle
Rolle Stavlind Ledinge Kvarnbol 444 741 90 Knivsta Tel 018-345597 GSM 070-5219597 FAX 070-6109597 E-post rolle@stavlind.se 2015-04-20 12:50 skrev John LaMartina:
The two image files are not compatible. CHIRP supports over 80 makes and models of radio.
You must first create an initial template for your specific model. This gives CHIRP a starting image of your radio and firmware. This is done by selecting the Radio tab in the CHIRP toolbar and perform a Download_from_Radio. This loads your radio's initial parameters.
You can now either Cut/Paste or Import the frequencies into your new template for the UV8D.
John
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Rolle Stavlind POP3 Sent: Monday, April 20, 2015 1:40 AM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Baofeng UV-5R and Wouxun KG-UVD8
Hi!
Got problems when try to program one off my Baofeng UV-5R.
See the screens dumps below.
Using the daily file from 20150416.
Using Baofeng software the radio works.
The other UV-5R works fine both with Chirp and Baofeng software
When programing Wouxun KG-UVD8 it seems like some parameters don´t transfers to the radio.
/Rolle
<image001.png>
<image002.png>
<image003.png>
Rolle Stavlind
Ledinge Kvarnbol 444
741 90 Knivsta
Tel 018-345597
Mobil 070-5219597
Mail rolle@stavlind.se
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
There is NO reason to take the antenna off. In fact, that could damage your radio. From: eddie broker eddieb@me.com To: "rolle@stavlind.se" rolle@stavlind.se; Discussion of CHIRP chirp_users@intrepid.danplanet.com Sent: Monday, April 20, 2015 10:24 AM Subject: Re: [chirp_users] Baofeng UV-5R and Wouxun KG-UVD8
I have had same issue on several of them removing antenna and turning up volume helped still took 20 try's
Start by doing what's necessary; then do what's possible; and suddenly you are doing the impossible.
On Apr 20, 2015, at 7:19 AM, Rolle Stavlind rolle@stavlind.se wrote:
Hi! As you can see on the third clip. It is even impossible to download from the radio.I have no problems with the other stations./Rolle --- Rolle Stavlind Ledinge Kvarnbol 444 741 90 Knivsta Tel 018-345597 GSM 070-5219597FAX 070-6109597 E-post rolle@stavlind.se2015-04-20 12:50 skrev John LaMartina: The two image files are not compatible. CHIRP supports over 80 makes and models of radio.
You must first create an initial template for your specific model. This gives CHIRP a starting image of your radio and firmware. This is done by selecting the Radio tab in the CHIRP toolbar and perform a Download_from_Radio. This loads your radio's initial parameters. You can now either Cut/Paste or Import the frequencies into your new template for the UV8D.
Johnhttp://www.miklor.com From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Rolle Stavlind POP3 Sent: Monday, April 20, 2015 1:40 AM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Baofeng UV-5R and Wouxun KG-UVD8 Hi! Got problems when try to program one off my Baofeng UV-5R.See the screens dumps below.Using the daily file from 20150416. Using Baofeng software the radio works. The other UV-5R works fine both with Chirp and Baofeng software When programing Wouxun KG-UVD8 it seems like some parameters don´t transfers to the radio. /Rolle <image001.png> <image002.png> <image003.png>
Rolle Stavlind Ledinge Kvarnbol 444741 90 KnivstaTel 018-345597Mobil 070-5219597Mail rolle@stavlind.se
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
The just unscrew and it seems to reduce interface
Sent while speeding
On Apr 20, 2015, at 8:33 AM, John Wuest ultimafi@yahoo.com wrote:
There is NO reason to take the antenna off. In fact, that could damage your radio.
From: eddie broker eddieb@me.com To: "rolle@stavlind.se" rolle@stavlind.se; Discussion of CHIRP chirp_users@intrepid.danplanet.com Sent: Monday, April 20, 2015 10:24 AM Subject: Re: [chirp_users] Baofeng UV-5R and Wouxun KG-UVD8
I have had same issue on several of them removing antenna and turning up volume helped still took 20 try's
Start by doing what's necessary; then do what's possible; and suddenly you are doing the impossible.
On Apr 20, 2015, at 7:19 AM, Rolle Stavlind rolle@stavlind.se wrote:
Hi!
As you can see on the third clip. It is even impossible to download from the radio. I have no problems with the other stations. /Rolle
Rolle Stavlind Ledinge Kvarnbol 444 741 90 Knivsta Tel 018-345597 GSM 070-5219597 FAX 070-6109597 E-post rolle@stavlind.se 2015-04-20 12:50 skrev John LaMartina:
The two image files are not compatible. CHIRP supports over 80 makes and models of radio.
You must first create an initial template for your specific model. This gives CHIRP a starting image of your radio and firmware. This is done by selecting the Radio tab in the CHIRP toolbar and perform a Download_from_Radio. This loads your radio's initial parameters.
You can now either Cut/Paste or Import the frequencies into your new template for the UV8D.
From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Rolle Stavlind POP3 Sent: Monday, April 20, 2015 1:40 AM To: chirp_users@intrepid.danplanet.com Subject: [chirp_users] Baofeng UV-5R and Wouxun KG-UVD8
Hi!
Got problems when try to program one off my Baofeng UV-5R. See the screens dumps below. Using the daily file from 20150416. Using Baofeng software the radio works.
The other UV-5R works fine both with Chirp and Baofeng software
When programing Wouxun KG-UVD8 it seems like some parameters don´t transfers to the radio.
/Rolle
<image001.png>
<image002.png>
<image003.png>
Rolle Stavlind
Ledinge Kvarnbol 444 741 90 Knivsta Tel 018-345597 Mobil 070-5219597 Mail rolle@stavlind.se
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Rolle,
Baofeng is currently shipping radios that have no data in the area where the firmware version is normally stored. You can clearly see from image001.png that you have one of these radios. CHIRP uses the data in this area to make sure that the radio it is communicating with matches the radio that the user selected.
Jim KC9HI
On Mon, Apr 20, 2015 at 10:19 AM, Rolle Stavlind rolle@stavlind.se wrote:
Hi!
As you can see on the third clip. It is even impossible to download from the radio.
I have no problems with the other stations.
/Rolle
Rolle,
I reported the same problem a few weeks ago with a new Baofeng UV-5R I purchased.
Having successfully programmed many prior UV-5R's, I was surprised when I could not program the newest UV-5R I purchased.
"After further review" . . . I discovered that this newer UV-5R is a little different than the prior verions I was successful with. The new version simply refuses to respond to the CHIRP programming.
After some back-and-forth with CHIRP . . . trying to program it to work around the same errors that you are reporting . . . I was advised that a solution could not be found.
I will be watching to see if you have better luck.
Hugh KK6GGH
-----Original Message----- From: Rolle Stavlind POP3 rolle@stavlind.se To: chirp_users chirp_users@intrepid.danplanet.com Sent: Sun, Apr 19, 2015 11:42 pm Subject: [chirp_users] Baofeng UV-5R and Wouxun KG-UVD8
Hi!
Got problems when try to program one off my Baofeng UV-5R.
See the screens dumps below.
Using the daily file from 20150416.
Using Baofeng software the radio works.
The other UV-5R works fine both with Chirp and Baofeng software
When programing Wouxun KG-UVD8 it seems like some parameters don´t transfers to the radio.
/Rolle
Rolle Stavlind
Ledinge Kvarnbol 444
741 90 Knivsta
Tel 018-345597
Mobil 070-5219597
Mail rolle@stavlind.se
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (7)
-
eddie broker -
HughCPA -
Jim Unroe -
John LaMartina -
John Wuest -
Rolle Stavlind -
Rolle Stavlind POP3