The two image files are not compatible.
CHIRP supports over 80 makes and models of radio. 

You must first create an initial template for your specific model.
This gives CHIRP a starting image of your radio and firmware.
This is done by selecting the Radio tab in the CHIRP toolbar and perform a Download_from_Radio.
This loads your radio's initial parameters.

You can now either Cut/Paste or Import the frequencies into your new template for the UV8D.

John

http://www.miklor.com

From: chirp_users-bounces@intrepid.danplanet.com [mailto:chirp_users-bounces@intrepid.danplanet.com] On Behalf Of Rolle Stavlind POP3
Sent: Monday, April 20, 2015 1:40 AM
To: chirp_users@intrepid.danplanet.com
Subject: [chirp_users] Baofeng UV-5R and Wouxun KG-UVD8

Hi!

Got problems when try to program one off my Baofeng UV-5R.

See the screens dumps below.

Using the daily file from 20150416.

Using Baofeng software the radio works.

The other UV-5R works fine both with Chirp and Baofeng software         

When programing Wouxun KG-UVD8 it seems like some parameters don´t transfers to the radio.

/Rolle

Rolle Stavlind

Ledinge Kvarnbol 444

741 90 Knivsta

Tel 018-345597

Mobil 070-5219597

Mail rolle@stavlind.se