Rolle,

I reported the same problem a few weeks ago with a new Baofeng UV-5R I purchased.

Having successfully programmed many prior UV-5R's, I was surprised when I could not
program the newest UV-5R I purchased.

"After further review" . . . I discovered that this newer UV-5R is a little different than
the prior verions I was successful with. The new version simply refuses to respond to
the CHIRP programming.

After some back-and-forth with CHIRP . . . trying to program it to work around the same
errors that you are reporting . . . I was advised that a solution could not be found.

I will be watching to see if you have better luck.

Hugh
KK6GGH 

-----Original Message-----
From: Rolle Stavlind POP3 <rolle@stavlind.se>
To: chirp_users <chirp_users@intrepid.danplanet.com>
Sent: Sun, Apr 19, 2015 11:42 pm
Subject: [chirp_users] Baofeng UV-5R and Wouxun KG-UVD8

Hi!
 
Got problems when try to program one off my Baofeng UV-5R.
See the screens dumps below.
Using the daily file from 20150416.
Using Baofeng software the radio works.
 
The other UV-5R works fine both with Chirp and Baofeng software         
 
When programing Wouxun KG-UVD8 it seems like some parameters don´t transfers to the radio.
 
 
/Rolle
 
 
 
 
 
Rolle Stavlind
 
Ledinge Kvarnbol 444
741 90 Knivsta
Tel 018-345597
Mobil 070-5219597
Mail rolle@stavlind.se
 
_______________________________________________
chirp_users mailing
list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
To
unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com