[chirp_users] PL tone 146.3 not available to use
Hello.
I have a baofeng hp 82 and I used the older software to program it and it works great with our repeater. Then I got a btech 50 and downloaded the chirp software to program it but I cannot get it to work right off our repeater. One of the problems is that the pl tone box only has a drop down box and preset pl tones and ours is 146.3. I can't figure out how to put that tone in the chirp program. I have tried to manually input it into the radio itself and it won't work. I had this problem with the bf82 also before I got the software and programmed it with the computer instead of putting it into the radio. Can anyone help?
Do you mean 146.2? 146.3 isn't a standard tone.
Tom ND5Y
On 06/29/2017 11:28 PM, Kyle Colyer wrote:
Hello.
I have a baofeng hp 82 and I used the older software to program it and it works great with our repeater. Then I got a btech 50 and downloaded the chirp software to program it but I cannot get it to work right off our repeater. One of the problems is that the pl tone box only has a drop down box and preset pl tones and ours is 146.3. I can't figure out how to put that tone in the chirp program. I have tried to manually input it into the radio itself and it won't work. I had this problem with the bf82 also before I got the software and programmed it with the computer instead of putting it into the radio. Can anyone help?
No it is 146.3. The repeater site is managed by a company and they said it is 146.3. It works on 146.3 on my handheld boafeng.
On Fri, Jun 30, 2017 at 6:16 AM Tom Consodine via chirp_users < chirp_users@intrepid.danplanet.com> wrote:
Do you mean 146.2? 146.3 isn't a standard tone.
Tom ND5Y
On 06/29/2017 11:28 PM, Kyle Colyer wrote:
Hello.
I have a baofeng hp 82 and I used the older software to program it and it works great with our repeater. Then I got a btech 50 and downloaded the chirp software to program it but I cannot get it to work right off our repeater. One of the problems is that the pl tone box only has a drop down box and preset pl tones and ours is 146.3. I can't figure out how to put that tone in the chirp program. I have tried to manually input it into the radio itself and it won't work. I had this problem with the bf82 also before I got the software and programmed it with the computer instead of putting it into the radio. Can anyone help?
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to KRC at colyer.kyle@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Try 141.3, no such 146.3!!!!! ----- Original Message ----- From: Kyle Colyer To: Discussion of CHIRP ; Tom Consodine Sent: Friday, June 30, 2017 11:19 AM Subject: Re: [chirp_users] PL tone 146.3 not available to use
No it is 146.3. The repeater site is managed by a company and they said it is 146.3. It works on 146.3 on my handheld boafeng.
On Fri, Jun 30, 2017 at 6:16 AM Tom Consodine via chirp_users chirp_users@intrepid.danplanet.com wrote:
Do you mean 146.2? 146.3 isn't a standard tone.
Tom ND5Y
On 06/29/2017 11:28 PM, Kyle Colyer wrote: > Hello. > > I have a baofeng hp 82 and I used the older software to program it and > it works great with our repeater. Then I got a btech 50 and downloaded > the chirp software to program it but I cannot get it to work right off > our repeater. One of the problems is that the pl tone box only has a > drop down box and preset pl tones and ours is 146.3. I can't figure out > how to put that tone in the chirp program. I have tried to manually > input it into the radio itself and it won't work. I had this problem > with the bf82 also before I got the software and programmed it with the > computer instead of putting it into the radio. Can anyone help? _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to KRC at colyer.kyle@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
------------------------------------------------------------------------------
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to BillG226 at wcgabbard1@windstream.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Here is a list: CTCSS (*Continuous Tone-Coded Squelch System) Codes* CTCSS Hz CTCSS Hz CTCSS Hz 1 67.0 14 107.2 27 167.9 2 71.9 15 110.9 28 173.8 3 74.4 16 114.8 29 179.9 4 77.0 17 118.8 30 186.2 5 79.7 18 123 31 192.8 6 82.5 19 127.3 32 203.5 7 85.4 20 131.8 33 210.7 8 88.5 21 136.5 34 218.1 9 91.5 22 141.3 35 225.7 10 94.8 23 146.2 36 233.6 11 97.4 24 151.4 37 241.8 12 100.0 25 156.7 38 250.3 13 103.5 26 162.2 122* 69.3
*Some radios use 69.4 Hz instead, which better fits the harmonic sequence, and this tone is often omitted as a choice. Info taken from: http://www.hitechwireless.com/ctcss-codes/
I used this one because the table was less complicated. But all you need to do to see the CTCSS standard tones is google CTCSS.
On Fri, Jun 30, 2017 at 10:37 AM, Bill Gabbard wcgabbard1@windstream.net wrote:
*Try 141.3, no such 146.3!!!!!*
----- Original Message ----- *From:* Kyle Colyer colyer.kyle@gmail.com *To:* Discussion of CHIRP chirp_users@intrepid.danplanet.com ; Tom Consodine nd5y@yahoo.com *Sent:* Friday, June 30, 2017 11:19 AM *Subject:* Re: [chirp_users] PL tone 146.3 not available to use
No it is 146.3. The repeater site is managed by a company and they said it is 146.3. It works on 146.3 on my handheld boafeng.
On Fri, Jun 30, 2017 at 6:16 AM Tom Consodine via chirp_users < chirp_users@intrepid.danplanet.com> wrote:
Do you mean 146.2? 146.3 isn't a standard tone.
Tom ND5Y
On 06/29/2017 11:28 PM, Kyle Colyer wrote:
Hello.
I have a baofeng hp 82 and I used the older software to program it and it works great with our repeater. Then I got a btech 50 and downloaded the chirp software to program it but I cannot get it to work right off our repeater. One of the problems is that the pl tone box only has a drop down box and preset pl tones and ours is 146.3. I can't figure out how to put that tone in the chirp program. I have tried to manually input it into the radio itself and it won't work. I had this problem with the bf82 also before I got the software and programmed it with the computer instead of putting it into the radio. Can anyone help?
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to KRC at colyer.kyle@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to BillG226 at wcgabbard1@windstream.net To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Chuck Hast at kp4djt@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
When I use the 146.2 or 146.3 it will key up another radio and everything seems right just no sound comes thru the mic to the other end. You can hear it squelch and everything just no voice
On Fri, Jun 30, 2017 at 2:15 PM Chuck Hast kp4djt@gmail.com wrote:
Here is a list: CTCSS (*Continuous Tone-Coded Squelch System) Codes* CTCSS Hz CTCSS Hz CTCSS Hz 1 67.0 14 107.2 27 167.9 2 71.9 15 110.9 28 173.8 3 74.4 16 114.8 29 179.9 4 77.0 17 118.8 30 186.2 5 79.7 18 123 31 192.8 6 82.5 19 127.3 32 203.5 7 85.4 20 131.8 33 210.7 8 88.5 21 136.5 34 218.1 9 91.5 22 141.3 35 225.7 10 94.8 23 146.2 36 233.6 11 97.4 24 151.4 37 241.8 12 100.0 25 156.7 38 250.3 13 103.5 26 162.2 122* 69.3
*Some radios use 69.4 Hz instead, which better fits the harmonic sequence, and this tone is often omitted as a choice. Info taken from: http://www.hitechwireless.com/ctcss-codes/
I used this one because the table was less complicated. But all you need to do to see the CTCSS standard tones is google CTCSS.
On Fri, Jun 30, 2017 at 10:37 AM, Bill Gabbard wcgabbard1@windstream.net wrote:
*Try 141.3, no such 146.3!!!!!*
----- Original Message ----- *From:* Kyle Colyer colyer.kyle@gmail.com *To:* Discussion of CHIRP chirp_users@intrepid.danplanet.com ; Tom Consodine nd5y@yahoo.com *Sent:* Friday, June 30, 2017 11:19 AM *Subject:* Re: [chirp_users] PL tone 146.3 not available to use
No it is 146.3. The repeater site is managed by a company and they said it is 146.3. It works on 146.3 on my handheld boafeng.
On Fri, Jun 30, 2017 at 6:16 AM Tom Consodine via chirp_users < chirp_users@intrepid.danplanet.com> wrote:
Do you mean 146.2? 146.3 isn't a standard tone.
Tom ND5Y
On 06/29/2017 11:28 PM, Kyle Colyer wrote:
Hello.
I have a baofeng hp 82 and I used the older software to program it and it works great with our repeater. Then I got a btech 50 and downloaded the chirp software to program it but I cannot get it to work right off our repeater. One of the problems is that the pl tone box only has a drop down box and preset pl tones and ours is 146.3. I can't figure out how to put that tone in the chirp program. I have tried to manually input it into the radio itself and it won't work. I had this problem with the bf82 also before I got the software and programmed it with the computer instead of putting it into the radio. Can anyone help?
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to KRC at colyer.kyle@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to BillG226 at wcgabbard1@windstream.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Chuck Hast at kp4djt@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to KRC at colyer.kyle@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
Ok I can receive just fine with the 146.2 tone and when I transmit it hits the repeater and sounds like voice should be coming but nothing is being said. Then when you let off the key it make sound like you hit the repeater just no voice. It must be another setting in the btech that is not right. Other frequency and channels work fine just not this one ??
Any ideas
On Fri, Jun 30, 2017 at 3:52 PM Kyle Colyer colyer.kyle@gmail.com wrote:
When I use the 146.2 or 146.3 it will key up another radio and everything seems right just no sound comes thru the mic to the other end. You can hear it squelch and everything just no voice
On Fri, Jun 30, 2017 at 2:15 PM Chuck Hast kp4djt@gmail.com wrote:
Here is a list: CTCSS (*Continuous Tone-Coded Squelch System) Codes* CTCSS Hz CTCSS Hz CTCSS Hz 1 67.0 14 107.2 27 167.9 2 71.9 15 110.9 28 173.8 3 74.4 16 114.8 29 179.9 4 77.0 17 118.8 30 186.2 5 79.7 18 123 31 192.8 6 82.5 19 127.3 32 203.5 7 85.4 20 131.8 33 210.7 8 88.5 21 136.5 34 218.1 9 91.5 22 141.3 35 225.7 10 94.8 23 146.2 36 233.6 11 97.4 24 151.4 37 241.8 12 100.0 25 156.7 38 250.3 13 103.5 26 162.2 122* 69.3
*Some radios use 69.4 Hz instead, which better fits the harmonic sequence, and this tone is often omitted as a choice. Info taken from: http://www.hitechwireless.com/ctcss-codes/
I used this one because the table was less complicated. But all you need to do to see the CTCSS standard tones is google CTCSS.
On Fri, Jun 30, 2017 at 10:37 AM, Bill Gabbard <wcgabbard1@windstream.net
wrote:
*Try 141.3, no such 146.3!!!!!*
----- Original Message ----- *From:* Kyle Colyer colyer.kyle@gmail.com *To:* Discussion of CHIRP chirp_users@intrepid.danplanet.com ; Tom Consodine nd5y@yahoo.com *Sent:* Friday, June 30, 2017 11:19 AM *Subject:* Re: [chirp_users] PL tone 146.3 not available to use
No it is 146.3. The repeater site is managed by a company and they said it is 146.3. It works on 146.3 on my handheld boafeng.
On Fri, Jun 30, 2017 at 6:16 AM Tom Consodine via chirp_users < chirp_users@intrepid.danplanet.com> wrote:
Do you mean 146.2? 146.3 isn't a standard tone.
Tom ND5Y
On 06/29/2017 11:28 PM, Kyle Colyer wrote:
Hello.
I have a baofeng hp 82 and I used the older software to program it and it works great with our repeater. Then I got a btech 50 and downloaded the chirp software to program it but I cannot get it to work right off our repeater. One of the problems is that the pl tone box only has a drop down box and preset pl tones and ours is 146.3. I can't figure
out
how to put that tone in the chirp program. I have tried to manually input it into the radio itself and it won't work. I had this problem with the bf82 also before I got the software and programmed it with
the
computer instead of putting it into the radio. Can anyone help?
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to KRC at colyer.kyle@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to BillG226 at wcgabbard1@windstream.net To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Chuck Hast at kp4djt@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to KRC at colyer.kyle@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
How are you listening to the repeater while you are transmitting on your Baofeng?
If when transmitting from the Baofeng transceiver, try pressing a sequence of Touch-Tone (R) keys.
Do these come across the other receiver?
Tune the other receiver (the one you are using to listen to the repeater while you are transmitting) to the input frequency of the repeater. Can you now here your voice when speaking? You should be hearing it. Put on the tone squelch on the other receiver, does the tone squelch of 146.2 Hz open up the receiver when you transmit using that tone?
If so, you know that you have audio, if no audio, explorer further.
73
DR N1EA
On Fri, Jun 30, 2017 at 8:10 PM, Kyle Colyer colyer.kyle@gmail.com wrote:
Ok I can receive just fine with the 146.2 tone and when I transmit it hits the repeater and sounds like voice should be coming but nothing is being said. Then when you let off the key it make sound like you hit the repeater just no voice. It must be another setting in the btech that is not right. Other frequency and channels work fine just not this one ??
Any ideas
On Fri, Jun 30, 2017 at 3:52 PM Kyle Colyer colyer.kyle@gmail.com wrote:
When I use the 146.2 or 146.3 it will key up another radio and everything seems right just no sound comes thru the mic to the other end. You can hear it squelch and everything just no voice
On Fri, Jun 30, 2017 at 2:15 PM Chuck Hast kp4djt@gmail.com wrote:
Here is a list: CTCSS (*Continuous Tone-Coded Squelch System) Codes* CTCSS Hz CTCSS Hz CTCSS Hz 1 67.0 14 107.2 27 167.9 2 71.9 15 110.9 28 173.8 3 74.4 16 114.8 29 179.9 4 77.0 17 118.8 30 186.2 5 79.7 18 123 31 192.8 6 82.5 19 127.3 32 203.5 7 85.4 20 131.8 33 210.7 8 88.5 21 136.5 34 218.1 9 91.5 22 141.3 35 225.7 10 94.8 23 146.2 36 233.6 11 97.4 24 151.4 37 241.8 12 100.0 25 156.7 38 250.3 13 103.5 26 162.2 122* 69.3
*Some radios use 69.4 Hz instead, which better fits the harmonic sequence, and this tone is often omitted as a choice. Info taken from: http://www.hitechwireless.com/ctcss-codes/
I used this one because the table was less complicated. But all you need to do to see the CTCSS standard tones is google CTCSS.
On Fri, Jun 30, 2017 at 10:37 AM, Bill Gabbard < wcgabbard1@windstream.net> wrote:
*Try 141.3, no such 146.3!!!!!*
----- Original Message ----- *From:* Kyle Colyer colyer.kyle@gmail.com *To:* Discussion of CHIRP chirp_users@intrepid.danplanet.com ; Tom Consodine nd5y@yahoo.com *Sent:* Friday, June 30, 2017 11:19 AM *Subject:* Re: [chirp_users] PL tone 146.3 not available to use
No it is 146.3. The repeater site is managed by a company and they said it is 146.3. It works on 146.3 on my handheld boafeng.
On Fri, Jun 30, 2017 at 6:16 AM Tom Consodine via chirp_users < chirp_users@intrepid.danplanet.com> wrote:
Do you mean 146.2? 146.3 isn't a standard tone.
Tom ND5Y
On 06/29/2017 11:28 PM, Kyle Colyer wrote:
Hello.
I have a baofeng hp 82 and I used the older software to program it
and
it works great with our repeater. Then I got a btech 50 and
downloaded
the chirp software to program it but I cannot get it to work right
off
our repeater. One of the problems is that the pl tone box only has a drop down box and preset pl tones and ours is 146.3. I can't figure
out
how to put that tone in the chirp program. I have tried to manually input it into the radio itself and it won't work. I had this problem with the bf82 also before I got the software and programmed it with
the
computer instead of putting it into the radio. Can anyone help?
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to KRC at colyer.kyle@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to BillG226 at wcgabbard1@windstream.net To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to Chuck Hast at kp4djt@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to KRC at colyer.kyle@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
On Fri, Jun 30, 2017 at 8:10 PM, Kyle Colyer colyer.kyle@gmail.com wrote:
Ok I can receive just fine with the 146.2 tone and when I transmit it hits the repeater and sounds like voice should be coming but nothing is being said. Then when you let off the key it make sound like you hit the repeater just no voice. It must be another setting in the btech that is not right. Other frequency and channels work fine just not this one ??
Any ideas
You cannot monitor your transmissions through a repeater with a close by receiver. The off-frequency signal from your transmitter renders the monitor receiver deaf during the time it is transmitting. There was a sound "like you hit the repeater" because it is working.
Jim
Hi Kyle,
Just a few thoughts: can you get a nearby ham to listen on the input of the repeater? You will then know, for definite if you are modulating or not. Or even to be sure you're transmitting on the right frequency.
Talking of modulation... what is your TX set to (is it adjustable?!) There will be something like wide or narrow.
Are you sure about the ctcss / PL tone frequency? I just Googled it, and I can only find 146.2.
Some of this you'll have done I'm sure. Otherwise - hope it's useful.
Good luck nailing it.
Simon G4PEM
On 30 Jun 2017 5:29 a.m., "Kyle Colyer" colyer.kyle@gmail.com wrote:
Hello.
I have a baofeng hp 82 and I used the older software to program it and it works great with our repeater. Then I got a btech 50 and downloaded the chirp software to program it but I cannot get it to work right off our repeater. One of the problems is that the pl tone box only has a drop down box and preset pl tones and ours is 146.3. I can't figure out how to put that tone in the chirp program. I have tried to manually input it into the radio itself and it won't work. I had this problem with the bf82 also before I got the software and programmed it with the computer instead of putting it into the radio. Can anyone help?
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Simon Rodda, G4PEM at simon.rodda@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
I tried to find out what repeater Kyle was talking about.
I went to qrz.com to search using his name to come up with his callsign which he neglected to give. There were no results to a search for Kyle Colyer.
Kyle, would you give us the name of the repeater you wish to use? Maybe someone could listen for you.
73
David N1EA
On Jul 1, 2017 13:31, "Simon Rodda" simon.rodda@gmail.com wrote:
Hi Kyle,
Just a few thoughts: can you get a nearby ham to listen on the input of the repeater? You will then know, for definite if you are modulating or not. Or even to be sure you're transmitting on the right frequency.
Talking of modulation... what is your TX set to (is it adjustable?!) There will be something like wide or narrow.
Are you sure about the ctcss / PL tone frequency? I just Googled it, and I can only find 146.2.
Some of this you'll have done I'm sure. Otherwise - hope it's useful.
Good luck nailing it.
Simon G4PEM
On 30 Jun 2017 5:29 a.m., "Kyle Colyer" colyer.kyle@gmail.com wrote:
Hello.
I have a baofeng hp 82 and I used the older software to program it and it works great with our repeater. Then I got a btech 50 and downloaded the chirp software to program it but I cannot get it to work right off our repeater. One of the problems is that the pl tone box only has a drop down box and preset pl tones and ours is 146.3. I can't figure out how to put that tone in the chirp program. I have tried to manually input it into the radio itself and it won't work. I had this problem with the bf82 also before I got the software and programmed it with the computer instead of putting it into the radio. Can anyone help?
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Simon Rodda, G4PEM at simon.rodda@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrep id.danplanet.com
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to D.J.J. Ring, Jr. at n1ea@arrl.net To unsubscribe, send an email to chirp_users-unsubscribe@ intrepid.danplanet.com
I thought the OP said he is using a commercial system through his employer.
On 7/1/2017 14:37, D.J.J. Ring, Jr. wrote:
I tried to find out what repeater Kyle was talking about.
I went to qrz.com http://qrz.com to search using his name to come up with his callsign which he neglected to give. There were no results to a search for Kyle Colyer.
Kyle, would you give us the name of the repeater you wish to use? Maybe someone could listen for you.
participants (8)
-
Bill Gabbard -
Chuck Hast -
D.J.J. Ring, Jr. -
Jim Unroe -
John -
Kyle Colyer -
Simon Rodda -
Tom Consodine