Hi Marthijn,

the cable I use is this: http://ecx.images-amazon.com/images/I/41iI3L%2BXoeL.jpg, at least from its appearance. Sure, send me your driver. I’ll try anything once. Do you know if I need to unload the current driver…and in case I have to, how I do it? Sorry for the noob questions.

Cheers, Chris

On May 14, 2014, at 5:32 PM, Marthijn Soesbergen marthijnsoesbergen@gmail.com wrote:

Christian,

Ik using a UV-5R and I program it with the same driver. If you want me to I can send you my driver and see if that works for you. Are you using the Kenwood style cable?

Regards, Marthijn Soesbergen

Verstuurd vanaf mijn iPhone

Op 14 mei 2014 om 17:01 heeft Christian Schwarz coffeeisallineed@gmail.com het volgende geschreven:

...

Hi everybody,

I’d like to know, if anybody managed to program the UV-82 using chirp (or the daily build 20140428) on osx 10.9.2. I read that one might or might not have to disable apple’s own driver for FTDI chipset. I’ve been googleing the topic for a few days now and have not found a way to make it work on my mbp. The system report will tell me that a USB-Serial Controller is there:

USB-Serial Controller:

Product ID: 0x2303 Vendor ID: 0x067b (Prolific Technology, Inc.) Version: 3.00 Speed: Up to 12 Mb/sec Manufacturer: Prolific Technology Inc. Location ID: 0xfa130000 / 6 Current Available (mA): 500 Current Required (mA): 100

When I try to "download from radio” I have four choices in a dropdown menu, each of which will give me an error message:

• /dev/cu.Bluetooth-Incoming-Port error: An error has occurred - Radio did not respond
• /dev/cu.Bluetooth-Modem error: An error has occurred - could not open port /dev/cu.Bluetooth-Modem: [Errno 16] Resource busy: '/dev/cu.Bluetooth-Modem'
• /dev/cu.NoZAP-PL2303-000013FA error: Radio did not respond
• /dev/cu.usbserial error: Radio did not respond

Any ideas? I am using the USB programming cable from Baofeng, that came with the radio.

btw. under windows7 (installed on the mbp) it works like a charm.

Cheers, Chris

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

Do I need to uninstall the Prolific driver before installing the generic version?

I just purchased a Baofeng BF-F8, and have also been unable to get CHIRP to download from the radio using a Baofeng branded cable.

God Bless, Kyle Johnston KyleJohnston.net http://kylejohnston.net/ Animis Opibusque Parati pro Soli Deo!

On Wed, May 14, 2014 at 4:42 PM, Milton thecanesvenatici@gmail.com wrote:

http://chirp.danplanet.com/projects/chirp/wiki/MacOS_Tips#Generic-PL-2303-ca...

Get the Generic driver package. You have to right click to install to get around the Mavericks install nanny that won't let you double click to start the install on a package not signed by Apple.

On Wed, May 14, 2014 at 12:34 PM, Christian Schwarz < coffeeisallineed@gmail.com> wrote:

...

Hi Marthijn,

the cable I use is this: http://ecx.images-amazon.com/images/I/41iI3L%2BXoeL.jpg, at least from its appearance. Sure, send me your driver. I’ll try anything once. Do you know if I need to unload the current driver…and in case I have to, how I do it? Sorry for the noob questions.

Cheers, Chris

On May 14, 2014, at 5:32 PM, Marthijn Soesbergen < marthijnsoesbergen@gmail.com> wrote:

Christian,

Ik using a UV-5R and I program it with the same driver. If you want me to I can send you my driver and see if that works for you. Are you using the Kenwood style cable?

Regards, Marthijn Soesbergen

Verstuurd vanaf mijn iPhone

Op 14 mei 2014 om 17:01 heeft Christian Schwarz < coffeeisallineed@gmail.com> het volgende geschreven:

Hi everybody,

I’d like to know, if anybody managed to program the UV-82 using chirp (or the daily build 20140428) on osx 10.9.2. I read that one might or might not have to disable apple’s own driver for FTDI chipset. I’ve been googleing the topic for a few days now and have not found a way to make it work on my mbp. The system report will tell me that a USB-Serial Controller is there:

*USB-Serial Controller:*

Product ID: 0x2303 Vendor ID: 0x067b (Prolific Technology, Inc.) Version: 3.00 Speed: Up to 12 Mb/sec Manufacturer: Prolific Technology Inc. Location ID: 0xfa130000 / 6 Current Available (mA): 500 Current Required (mA): 100

When I try to "download from radio” I have four choices in a dropdown menu, each of which will give me an error message:

• /dev/cu.Bluetooth-Incoming-Port error: An error has occurred - Radio

did not respond

• /dev/cu.Bluetooth-Modem error: An error has occurred - could not open

port /dev/cu.Bluetooth-Modem: [Errno 16] Resource busy: '/dev/cu.Bluetooth-Modem'

• /dev/cu.NoZAP-PL2303-000013FA error: Radio did not respond
• /dev/cu.usbserial error: Radio did not respond

Any ideas? I am using the USB programming cable from Baofeng, that came with the radio.

btw. under windows7 (installed on the mbp) it works like a charm.

Cheers, Chris

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

Christian,

I have used the driver from the Miklor site that was suggested earlier. Maybe we have a different MBP but a different programming cable for sure. My cable is unmarked and just black. If you want me to I can send a picture later on. I'm not at home right now.

Regards, Marthijn

Verstuurd vanaf mijn iPhone

Op 15 mei 2014 om 09:24 heeft Christian Schwarz coffeeisallineed@gmail.com het volgende geschreven:

I would ask the same question. I did install the driver that was linked by Milton. I did not have to do a right click to install but I did it anyway. The system report however displays the same information as before:

USB-Serial Controller:

Product ID: 0x2303 Vendor ID: 0x067b (Prolific Technology, Inc.) Version: 3.00 Speed: Up to 12 Mb/sec Manufacturer: Prolific Technology Inc. Location ID: 0xfa130000 / 6 Current Available (mA): 500 Current Required (mA): 100

The install routine gave me the message that everything was installed just fine and I restarted the machine before creating the system report. Results in Chirp remain the same exactly. I don’t know if this has anything to tell me, but the driver I downloaded only specifies up to osx 10.8.

Cheers Chris

btw. does one see his own postings in the email list? I replied once, but am not sure I got through. I just hit the reply button in mail.app.

thx

...

On May 15, 2014, at 5:07 AM, Kyle Johnston Kyle@KyleJohnston.net wrote:

Do I need to uninstall the Prolific driver before installing the generic version?

I just purchased a Baofeng BF-F8, and have also been unable to get CHIRP to download from the radio using a Baofeng branded cable.

God Bless, Kyle Johnston KyleJohnston.net Animis Opibusque Parati pro Soli Deo!

...

On Wed, May 14, 2014 at 4:42 PM, Milton thecanesvenatici@gmail.com wrote: http://chirp.danplanet.com/projects/chirp/wiki/MacOS_Tips#Generic-PL-2303-ca...

Get the Generic driver package. You have to right click to install to get around the Mavericks install nanny that won't let you double click to start the install on a package not signed by Apple.

...

On Wed, May 14, 2014 at 12:34 PM, Christian Schwarz coffeeisallineed@gmail.com wrote: Hi Marthijn,

the cable I use is this: http://ecx.images-amazon.com/images/I/41iI3L%2BXoeL.jpg, at least from its appearance. Sure, send me your driver. I’ll try anything once. Do you know if I need to unload the current driver…and in case I have to, how I do it? Sorry for the noob questions.

Cheers, Chris

...

On May 14, 2014, at 5:32 PM, Marthijn Soesbergen marthijnsoesbergen@gmail.com wrote:

Christian,

Ik using a UV-5R and I program it with the same driver. If you want me to I can send you my driver and see if that works for you. Are you using the Kenwood style cable?

Regards, Marthijn Soesbergen

Verstuurd vanaf mijn iPhone

...

Op 14 mei 2014 om 17:01 heeft Christian Schwarz coffeeisallineed@gmail.com het volgende geschreven:

Hi everybody,

I’d like to know, if anybody managed to program the UV-82 using chirp (or the daily build 20140428) on osx 10.9.2. I read that one might or might not have to disable apple’s own driver for FTDI chipset. I’ve been googleing the topic for a few days now and have not found a way to make it work on my mbp. The system report will tell me that a USB-Serial Controller is there:

USB-Serial Controller:

Product ID: 0x2303 Vendor ID: 0x067b (Prolific Technology, Inc.) Version: 3.00 Speed: Up to 12 Mb/sec Manufacturer: Prolific Technology Inc. Location ID: 0xfa130000 / 6 Current Available (mA): 500 Current Required (mA): 100

When I try to "download from radio” I have four choices in a dropdown menu, each of which will give me an error message:

• /dev/cu.Bluetooth-Incoming-Port error: An error has occurred - Radio did not respond
• /dev/cu.Bluetooth-Modem error: An error has occurred - could not open port /dev/cu.Bluetooth-Modem: [Errno 16] Resource busy: '/dev/cu.Bluetooth-Modem'
• /dev/cu.NoZAP-PL2303-000013FA error: Radio did not respond
• /dev/cu.usbserial error: Radio did not respond

Any ideas? I am using the USB programming cable from Baofeng, that came with the radio.

btw. under windows7 (installed on the mbp) it works like a charm.

Cheers, Chris

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

Thank you!

I ran the installer and CHIRP is now successfully able to program my BF-F8.

God Bless, Kyle Johnston KyleJohnston.net http://kylejohnston.net/ Animis Opibusque Parati pro Soli Deo!

On Thu, May 15, 2014 at 6:35 PM, Milton thecanesvenatici@gmail.com wrote:

The installer will uninstall other versions of the driver.

On Thu, May 15, 2014 at 4:21 PM, Marthijn Soesbergen < marthijnsoesbergen@gmail.com> wrote:

...

Christian,

I have used the driver from the Miklor site that was suggested earlier. Maybe we have a different MBP but a different programming cable for sure. My cable is unmarked and just black. If you want me to I can send a picture later on. I'm not at home right now.

Regards, Marthijn

Verstuurd vanaf mijn iPhone

Op 15 mei 2014 om 09:24 heeft Christian Schwarz < coffeeisallineed@gmail.com> het volgende geschreven:

I would ask the same question. I did install the driver that was linked by Milton. I did not have to do a right click to install but I did it anyway. The system report however displays the same information as before:

*USB-Serial Controller:*

Product ID: 0x2303 Vendor ID: 0x067b (Prolific Technology, Inc.) Version: 3.00 Speed: Up to 12 Mb/sec Manufacturer: Prolific Technology Inc. Location ID: 0xfa130000 / 6 Current Available (mA): 500 Current Required (mA): 100

The install routine gave me the message that everything was installed just fine and I restarted the machine before creating the system report. Results in Chirp remain the same exactly. I don’t know if this has anything to tell me, but the driver I downloaded only specifies up to osx 10.8.

Cheers Chris

btw. does one see his own postings in the email list? I replied once, but am not sure I got through. I just hit the reply button in mail.app.

thx

On May 15, 2014, at 5:07 AM, Kyle Johnston Kyle@KyleJohnston.net wrote:

Do I need to uninstall the Prolific driver before installing the generic version?

I just purchased a Baofeng BF-F8, and have also been unable to get CHIRP to download from the radio using a Baofeng branded cable.

God Bless, Kyle Johnston KyleJohnston.net http://kylejohnston.net/ Animis Opibusque Parati pro Soli Deo!

On Wed, May 14, 2014 at 4:42 PM, Milton thecanesvenatici@gmail.comwrote:

...

http://chirp.danplanet.com/projects/chirp/wiki/MacOS_Tips#Generic-PL-2303-ca...

Get the Generic driver package. You have to right click to install to get around the Mavericks install nanny that won't let you double click to start the install on a package not signed by Apple.

On Wed, May 14, 2014 at 12:34 PM, Christian Schwarz < coffeeisallineed@gmail.com> wrote:

...

Hi Marthijn,

the cable I use is this: http://ecx.images-amazon.com/images/I/41iI3L%2BXoeL.jpg, at least from its appearance. Sure, send me your driver. I’ll try anything once. Do you know if I need to unload the current driver…and in case I have to, how I do it? Sorry for the noob questions.

Cheers, Chris

On May 14, 2014, at 5:32 PM, Marthijn Soesbergen < marthijnsoesbergen@gmail.com> wrote:

Christian,

Ik using a UV-5R and I program it with the same driver. If you want me to I can send you my driver and see if that works for you. Are you using the Kenwood style cable?

Regards, Marthijn Soesbergen

Verstuurd vanaf mijn iPhone

Op 14 mei 2014 om 17:01 heeft Christian Schwarz < coffeeisallineed@gmail.com> het volgende geschreven:

Hi everybody,

I’d like to know, if anybody managed to program the UV-82 using chirp (or the daily build 20140428) on osx 10.9.2. I read that one might or might not have to disable apple’s own driver for FTDI chipset. I’ve been googleing the topic for a few days now and have not found a way to make it work on my mbp. The system report will tell me that a USB-Serial Controller is there:

*USB-Serial Controller:*

Product ID: 0x2303 Vendor ID: 0x067b (Prolific Technology, Inc.) Version: 3.00 Speed: Up to 12 Mb/sec Manufacturer: Prolific Technology Inc. Location ID: 0xfa130000 / 6 Current Available (mA): 500 Current Required (mA): 100

When I try to "download from radio” I have four choices in a dropdown menu, each of which will give me an error message:

• /dev/cu.Bluetooth-Incoming-Port error: An error has occurred - Radio

did not respond

• /dev/cu.Bluetooth-Modem error: An error has occurred - could not

open port /dev/cu.Bluetooth-Modem: [Errno 16] Resource busy: '/dev/cu.Bluetooth-Modem'

• /dev/cu.NoZAP-PL2303-000013FA error: Radio did not respond
• /dev/cu.usbserial error: Radio did not respond

Any ideas? I am using the USB programming cable from Baofeng, that came with the radio.

btw. under windows7 (installed on the mbp) it works like a charm.

Cheers, Chris

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

---

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

1. You dont have an ftdi chipset driver - so fixes for that dont apply. 2. You are using prolific (pl2303) and one of the open source drivers, as evidenced by the /dev/NoZAP* device. 3. try my driver package here: http://chirp.danplanet.com/projects/chirp/wiki/MacOS_Tips#Generic-PL-2303-ca... 4. it should yield a device like : /dev/tty.PL2303-xxxxxxxx

If you still get radio is not responding, then there could be a cable, and/or connection issue. You mentioned you already eliminated that as a possibility, that you were able to program same radio and cable combo on win 7.

________________________________ From: Marthijn Soesbergen marthijnsoesbergen@gmail.com To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Sent: Wednesday, May 14, 2014 10:32 AM Subject: Re: [chirp_users] Programing a Baofeng UV-82 with Chirp on osx 10.9.2

Christian,

Ik using a UV-5R and I program it with the same driver. If you want me to I can send you my driver and see if that works for you. Are you using the Kenwood style cable?

Regards, Marthijn Soesbergen

Verstuurd vanaf mijn iPhone

Op 14 mei 2014 om 17:01 heeft Christian Schwarz coffeeisallineed@gmail.com het volgende geschreven:

Hi everybody,

I’d like to know, if anybody managed to program the UV-82 using chirp (or the daily build 20140428) on osx 10.9.2. I read that one might or might not have to disable apple’s own driver for FTDI chipset. I’ve been googleing the topic for a few days now and have not found a way to make it work on my mbp. The system report will tell me that a USB-Serial Controller is there:

USB-Serial Controller:

Product ID:0x2303   Vendor ID:0x067b  (Prolific Technology, Inc.)   Version: 3.00   Speed:Up to 12 Mb/sec   Manufacturer:Prolific Technology Inc.   Location ID:0xfa130000 / 6   Current Available (mA):500   Current Required (mA):100

When I try to "download from radio” I have four choices in a dropdown menu, each of which will give me an error message:

- /dev/cu.Bluetooth-Incoming-Porterror: An error has occurred - Radio did not respond - /dev/cu.Bluetooth-Modemerror: An error has occurred - could not open port /dev/cu.Bluetooth-Modem: [Errno 16] Resource busy: '/dev/cu.Bluetooth-Modem' - /dev/cu.NoZAP-PL2303-000013FAerror: Radio did not respond - /dev/cu.usbserial error: Radio did not respond

Any ideas? I am using the USB programming cable from Baofeng, that came with the radio.

btw. under windows7 (installed on the mbp) it works like a charm.

Cheers, Chris

_______________________________________________

chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users

_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users