The installer will uninstall other versions of the driver.

On Thu, May 15, 2014 at 4:21 PM, Marthijn Soesbergen <marthijnsoesbergen@gmail.com> wrote:

Christian,

I have used the driver from the Miklor site that was suggested earlier. Maybe we have a different MBP but a different programming cable for sure. My cable is unmarked and just black. If you want me to I can send a picture later on. I'm not at home right now. 

Regards,

Marthijn

Verstuurd vanaf mijn iPhone

Op 15 mei 2014 om 09:24 heeft Christian Schwarz <coffeeisallineed@gmail.com> het volgende geschreven:

I would ask the same question. I did install the driver that was linked by Milton. I did not have to do a right click to install but I did it anyway. The system report however displays the same information as before:

USB-Serial Controller:

  Product ID: 0x2303

  Vendor ID: 0x067b  (Prolific Technology, Inc.)

  Version: 3.00

  Speed: Up to 12 Mb/sec

  Manufacturer: Prolific Technology Inc.

  Location ID: 0xfa130000 / 6

  Current Available (mA): 500

  Current Required (mA): 100

The install routine gave me the message that everything was installed just fine and I restarted the machine before creating the system report. Results in Chirp remain the same exactly. I don’t know if this has anything to tell me, but the driver I downloaded only specifies up to osx 10.8. 

Cheers

Chris

btw. does one see his own postings in the email list? I replied once, but am not sure I got through. I just hit the reply button in mail.app.

thx

On May 15, 2014, at 5:07 AM, Kyle Johnston <Kyle@KyleJohnston.net> wrote:

Do I need to uninstall the Prolific driver before installing the generic version?

I just purchased a Baofeng BF-F8, and have also been unable to get CHIRP to download from the radio using a Baofeng branded cable.

God Bless,
Kyle Johnston

KyleJohnston.net 
Animis Opibusque Parati pro Soli Deo!

On Wed, May 14, 2014 at 4:42 PM, Milton <thecanesvenatici@gmail.com> wrote:

http://chirp.danplanet.com/projects/chirp/wiki/MacOS_Tips#Generic-PL-2303-cables-counterfeit-andor-Generic

Get the Generic driver package. You have to right click to install to get around the Mavericks install nanny that

won't let you double click to start the install on a package not signed by Apple.

On Wed, May 14, 2014 at 12:34 PM, Christian Schwarz <coffeeisallineed@gmail.com> wrote:

Hi Marthijn,

the cable I use is this: http://ecx.images-amazon.com/images/I/41iI3L%2BXoeL.jpg, at least from its appearance. 

Sure, send me your driver. I’ll try anything once. Do you know if I need to unload the current driver…and in case I have to, how I do it? Sorry for the noob questions.

Cheers,

Chris

On May 14, 2014, at 5:32 PM, Marthijn Soesbergen <marthijnsoesbergen@gmail.com> wrote:

Christian,

Ik using a UV-5R and I program it with the same driver. If you want me to I can send you my driver and see if that works for you. Are you using the Kenwood style cable?

Regards,

Marthijn Soesbergen

Verstuurd vanaf mijn iPhone

Op 14 mei 2014 om 17:01 heeft Christian Schwarz <coffeeisallineed@gmail.com> het volgende geschreven:

Hi everybody,

I’d like to know, if anybody managed to program the UV-82 using chirp (or the daily build 20140428) on osx 10.9.2. I read that one might or might not have to disable apple’s own driver for FTDI chipset. I’ve been googleing the topic for a few days now and have not found a way to make it work on my mbp. The system report will tell me that a USB-Serial Controller is there:

USB-Serial Controller:

  Product ID: 0x2303

  Vendor ID: 0x067b  (Prolific Technology, Inc.)

  Version: 3.00

  Speed: Up to 12 Mb/sec

  Manufacturer: Prolific Technology Inc.

  Location ID: 0xfa130000 / 6

  Current Available (mA): 500

  Current Required (mA): 100

When I try to "download from radio” I have four choices in a dropdown menu, each of which will give me an error message:

- /dev/cu.Bluetooth-Incoming-Port error: An error has occurred - Radio did not respond

- /dev/cu.Bluetooth-Modem error: An error has occurred - could not open port /dev/cu.Bluetooth-Modem: [Errno 16] Resource busy: '/dev/cu.Bluetooth-Modem'

- /dev/cu.NoZAP-PL2303-000013FA error: Radio did not respond

- /dev/cu.usbserial  error: Radio did not respond

Any ideas? I am using the USB programming cable from Baofeng, that came with the radio. 

btw. under windows7 (installed on the mbp) it works like a charm.

Cheers,

Chris

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users

_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users