[chirp_users] QYT-KT8900D
I have several radios that I program using CHIRP, running Linux the manufacture software isn't usually compatible., so thank you to everyone that works so hard to make CHIRP a success. I have an 8900D that seems to program perfectly with one exception. This radio has four monitor slots on the front panel. When programming, the first two work great, number 3 and 4 however do not. Some settings like choosing the channel or frequency mode do work, but setting a default channel on them do not, they always come up to channel 0 after the restart. Does anyone else have this issue?
Thanks, Terry
On Sat, Mar 7, 2020 at 9:14 AM Terry Hunt terry@mylakeroyale.com wrote:
I have several radios that I program using CHIRP, running Linux the manufacture software isn't usually compatible., so thank you to everyone that works so hard to make CHIRP a success. I have an 8900D that seems to program perfectly with one exception. This radio has four monitor slots on the front panel. When programming, the first two work great, number 3 and 4 however do not. Some settings like choosing the channel or frequency mode do work, but setting a default channel on them do not, they always come up to channel 0 after the restart. Does anyone else have this issue?
Thanks, Terry
Hi Terry,
This is a bug in the hardware that has been present since the first units began shipping in 2017.
Jim KC9HI
Thanks Jim, that would make since. I appreciate the reply and confirmation.
Terry
________________________________ From: chirp_users-bounces@intrepid.danplanet.com chirp_users-bounces@intrepid.danplanet.com on behalf of Jim Unroe rock.unroe@gmail.com Sent: Saturday, March 7, 2020 10:32 AM To: Discussion of CHIRP chirp_users@intrepid.danplanet.com Subject: Re: [chirp_users] QYT-KT8900D
On Sat, Mar 7, 2020 at 9:14 AM Terry Hunt terry@mylakeroyale.com wrote:
I have several radios that I program using CHIRP, running Linux the manufacture software isn't usually compatible., so thank you to everyone that works so hard to make CHIRP a success. I have an 8900D that seems to program perfectly with one exception. This radio has four monitor slots on the front panel. When programming, the first two work great, number 3 and 4 however do not. Some settings like choosing the channel or frequency mode do work, but setting a default channel on them do not, they always come up to channel 0 after the restart. Does anyone else have this issue?
Thanks, Terry
Hi Terry,
This is a bug in the hardware that has been present since the first units began shipping in 2017.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fintrepid.da... This message was sent to Terry at terry@mylakeroyale.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
So it is not limited to linux but to windows as well!?
בתאריך שבת, 7 במרץ 2020, 19:22, מאת Terry Hunt terry@mylakeroyale.com:
Thanks Jim, that would make since. I appreciate the reply and confirmation.
Terry
*From:* chirp_users-bounces@intrepid.danplanet.com < chirp_users-bounces@intrepid.danplanet.com> on behalf of Jim Unroe < rock.unroe@gmail.com> *Sent:* Saturday, March 7, 2020 10:32 AM *To:* Discussion of CHIRP chirp_users@intrepid.danplanet.com *Subject:* Re: [chirp_users] QYT-KT8900D
On Sat, Mar 7, 2020 at 9:14 AM Terry Hunt terry@mylakeroyale.com wrote:
I have several radios that I program using CHIRP, running Linux the
manufacture software isn't usually compatible., so thank you to everyone that works so hard to make CHIRP a success. I have an 8900D that seems to program perfectly with one exception. This radio has four monitor slots on the front panel. When programming, the first two work great, number 3 and 4 however do not. Some settings like choosing the channel or frequency mode do work, but setting a default channel on them do not, they always come up to channel 0 after the restart. Does anyone else have this issue?
Thanks, Terry
Hi Terry,
This is a bug in the hardware that has been present since the first units began shipping in 2017.
Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com
https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fintrepid.da... This message was sent to Terry at terry@mylakeroyale.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to amnon at amnon.zohar@gmail.com To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
On Sat, Mar 7, 2020 at 1:54 PM Amnon Zohar amnon.zohar@gmail.com wrote:
So it is not limited to linux but to windows as well!?
Amnon,
It is a hardware problem. It has nothing to do with the programming software no matter what operating system is being used.
Jim KC9HI
It is a problem with the radio itself. Has nothing at all to do with Windows, Linux, or Chirp.
Tom Henderson
On 3/7/20 12:53 PM, Amnon Zohar wrote:
So it is not limited to linux but to windows as well!?
בתאריך שבת, 7 במרץ 2020, 19:22, מאת Terry Hunt <terry@mylakeroyale.com mailto:terry@mylakeroyale.com>:
Thanks Jim, that would make since. I appreciate the reply and confirmation. Terry ------------------------------------------------------------------------ *From:* chirp_users-bounces@intrepid.danplanet.com <mailto:chirp_users-bounces@intrepid.danplanet.com> <chirp_users-bounces@intrepid.danplanet.com <mailto:chirp_users-bounces@intrepid.danplanet.com>> on behalf of Jim Unroe <rock.unroe@gmail.com <mailto:rock.unroe@gmail.com>> *Sent:* Saturday, March 7, 2020 10:32 AM *To:* Discussion of CHIRP <chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com>> *Subject:* Re: [chirp_users] QYT-KT8900D On Sat, Mar 7, 2020 at 9:14 AM Terry Hunt <terry@mylakeroyale.com <mailto:terry@mylakeroyale.com>> wrote: > > I have several radios that I program using CHIRP, running Linux the manufacture software isn't usually compatible., so thank you to everyone that works so hard to make CHIRP a success. I have an 8900D that seems to program perfectly with one exception. This radio has four monitor slots on the front panel. When programming, the first two work great, number 3 and 4 however do not. Some settings like choosing the channel or frequency mode do work, but setting a default channel on them do not, they always come up to channel 0 after the restart. Does anyone else have this issue? > > Thanks, > Terry Hi Terry, This is a bug in the hardware that has been present since the first units began shipping in 2017. Jim KC9HI _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fintrepid.danplanet.com%2Fmailman%2Flistinfo%2Fchirp_users&data=02%7C01%7C%7C397a2a549e414369b14308d7c2aced1f%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637191920273250313&sdata=TRsyr%2F1fJcVsyO0EAYRzlgYsFBblA4%2F8IVv9lb7oV5Q%3D&reserved=0 This message was sent to Terry at terry@mylakeroyale.com <mailto:terry@mylakeroyale.com> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com> _______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com <mailto:chirp_users@intrepid.danplanet.com> http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to amnon at amnon.zohar@gmail.com <mailto:amnon.zohar@gmail.com> To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com <mailto:chirp_users-unsubscribe@intrepid.danplanet.com>
chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tom KM4UQB at tom@henderson4.us To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
participants (4)
-
Amnon Zohar -
Jim Unroe -
Terry Hunt -
Tom Henderson