It is a problem with the radio itself. Has nothing at all to do
with Windows, Linux, or Chirp.
Tom Henderson
So it is not limited to linux but to windows as well!?
בתאריך שבת, 7 במרץ 2020, 19:22, מאת Terry Hunt <terry@mylakeroyale.com>:
_______________________________________________Thanks Jim, that would make since. I appreciate the reply and confirmation.
Terry
From: chirp_users-bounces@intrepid.danplanet.com <chirp_users-bounces@intrepid.danplanet.com> on behalf of Jim Unroe <rock.unroe@gmail.com>
Sent: Saturday, March 7, 2020 10:32 AM
To: Discussion of CHIRP <chirp_users@intrepid.danplanet.com>
Subject: Re: [chirp_users] QYT-KT8900DOn Sat, Mar 7, 2020 at 9:14 AM Terry Hunt <terry@mylakeroyale.com> wrote:
>
> I have several radios that I program using CHIRP, running Linux the manufacture software isn't usually compatible., so thank you to everyone that works so hard to make CHIRP a success. I have an 8900D that seems to program perfectly with one exception. This radio has four monitor slots on the front panel. When programming, the first two work great, number 3 and 4 however do not. Some settings like choosing the channel or frequency mode do work, but setting a default channel on them do not, they always come up to channel 0 after the restart. Does anyone else have this issue?
>
> Thanks,
> Terry
Hi Terry,
This is a bug in the hardware that has been present since the first
units began shipping in 2017.
Jim KC9HI
_______________________________________________
chirp_users mailing list
chirp_users@intrepid.danplanet.com
https://nam04.safelinks.protection.outlook.com/?url=http%3A%2F%2Fintrepid.danplanet.com%2Fmailman%2Flistinfo%2Fchirp_users&data=02%7C01%7C%7C397a2a549e414369b14308d7c2aced1f%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637191920273250313&sdata=TRsyr%2F1fJcVsyO0EAYRzlgYsFBblA4%2F8IVv9lb7oV5Q%3D&reserved=0
This message was sent to Terry at terry@mylakeroyale.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
chirp_users mailing list
chirp_users@intrepid.danplanet.com
http://intrepid.danplanet.com/mailman/listinfo/chirp_users
This message was sent to amnon at amnon.zohar@gmail.com
To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com
_______________________________________________ chirp_users mailing list chirp_users@intrepid.danplanet.com http://intrepid.danplanet.com/mailman/listinfo/chirp_users This message was sent to Tom KM4UQB at tom@henderson4.us To unsubscribe, send an email to chirp_users-unsubscribe@intrepid.danplanet.com